1 Column 1C9 Unfactored Factored

(kN) (kN)
Area = 7.434 m2
BALCONY
Roof Live Load = 2.5 kN/m2 x 7.434 = 18.585 27.878
Total Live Load = 18.585 27.878

Finishes = 1.25 kN/m2 x 7.434 = 9.293 13.939

Slefweight Slab 150mm = 3.75 kN/m2 x 7.434 = 27.878 41.816
Rc Beam 230x500 = 2.875 kN/m x 7.515 = 21.606 29.168
Total Dead Load = 58.776 84.923

1st storey
Area = 9.260 m2
Live Load = 5 kN/m2 x 9.260 = 46.300 69.450
Total Live Load = 46.300 69.450

Finishes = 1.25 kN/m2 x 9.260 = 11.575 17.363

Slefweight Slab 150mm = 3.75 kN/m 2
x 9.260 = 34.725 52.088
Rc Beam 230x500 = 1.5 kN/m x 7.515 = 11.273 15.218
RC Column 230x230 = 1.323 kN/m x 3.700 = 4.893 6.606
Total Dead Load = 62.466 91.274

Total Live load = 97.328 kN

Total Dead Load = 176.196 kN

2 Column 1C10 Unfactored Factored

(kN) (kN)
Area = 8.640 m2
BALCONY
Roof Live Load = 2.5 kN/m2 x 8.640 = 21.600 32.400
Total Live Load = 21.600 32.400

Finishes = 1.25 kN/m2 x 8.640 = 10.800 16.200

Slefweight Slab 150mm = 3.75 kN/m 2
x 8.640 = 32.400 48.600
Rc Beam 230x500 = 2.875 kN/m x 5.715 = 16.431 22.181
Total Dead Load = 59.631 86.981

1st storey
Area = 9.260 m2
 Live Load = 5 kN/m2 x 9.260 = 46.300 69.450
Total Live Load = 46.300 69.450

Finishes = 1.25 kN/m2 x 9.260 = 11.575 17.363

Slefweight Slab 150mm = 3.75 kN/m2 x 9.260 = 34.725 52.088
Rc Beam 230x500 = 1.5 kN/m x 3.715 = 5.573 7.523
RC Column 230x230 = 1.323 kN/m x 3.700 = 4.893 6.606
Total Dead Load = 56.766 83.579

Total Live load = 101.850 kN

Total Dead Load = 170.560 kN

3 Column 1C11 Unfactored Factored

(kN) (kN)
Area = 11.133 m2
BALCONY
Roof Live Load = 2.5 kN/m2 x 11.133 = 27.833 41.749
Total Live Load = 27.833 41.749

Finishes = 1.25 kN/m2 x 11.133 = 13.916 20.874

Slefweight Slab 150mm = 3.75 kN/m2 x 11.133 = 41.749 62.623
Rc Beam 230x500 = 2.875 kN/m x 11.015 = 31.668 42.752
Total Dead Load = 87.333 126.249

1st storey
Area = 7.420 m2
Live Load = 5 kN/m2 x 7.420 = 37.100 55.650
Total Live Load = 37.100 55.650

Finishes = 1.25 kN/m2 x 7.420 = 9.275 13.913

Slefweight Slab 150mm = 3.75 kN/m 2
x 7.420 = 27.825 41.738
Rc Beam 230x500 = 1.5 kN/m x 5.715 = 8.573 11.573
RC Column 230x230 = 1.323 kN/m x 3.700 = 4.893 6.606
Total Dead Load = 50.566 73.829

Total Live load = 97.399 kN

Total Dead Load = 200.078 kN

4 Column 1C12 Unfactored Factored

(kN) (kN)
Area = 12.930 m2
BALCONY
Roof Live Load = 2.5 kN/m2 x 12.930 = 32.325 48.488
Total Live Load = 32.325 48.488

Finishes = 1.25 kN/m2 x 12.930 = 16.163 24.244

Slefweight Slab 150mm = 3.75 kN/m 2
x 12.930 = 48.488 72.731
Rc Beam 230x500 = 2.875 kN/m x 7.300 = 20.988 28.333
Total Dead Load = 85.638 125.308

1st storey
Area = 7.420 m2
Live Load = 5 kN/m2 x 7.420 = 37.100 55.650
Total Live Load = 37.100 55.650

Finishes = 1.25 kN/m2 x 7.420 = 9.275 13.913

Slefweight Slab 150mm = 3.75 kN/m 2
x 7.420 = 27.825 41.738
Rc Beam 230x500 = 1.5 kN/m x 9.215 = 13.823 18.660
RC Column 230x230 = 1.323 kN/m x 3.700 = 4.893 6.606
Total Dead Load = 55.816 80.916

Total Live load = 104.138 kN

Total Dead Load = 206.224 kN
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

1 DESIGN CALCULATION OF RC SLAB

boundary line 31.118m 142° 57' 30"

boundary line 11.956m 53° 42' 30"

1a Design Calculation of Typical RC Slab 2nd Storey

three side continuous 150mm THK

Direction X
Due Live Load
10.5 kN/m

2.1m

Lx = 2.1 m
Ly = 3.3 m
Ly/Lx = 1.57 <2

Interpolation for tabel

Negative moment = 0.0650
Positive moment = 0.0490

Span = 2.1 m

Page 4 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

Spacing Load = 1.00 m

Live load = 2.5 kN/m2
Finishes = 1.25 kN/m2
Rc Slab 150mm thk = 3.75 kN/m2

Factored Load = 10.50 kN/m2

UDL = 10.50 kN/m

Negative Moment, Msx=0.65wL2 = 3.01 kNm

Positive moment, Msx=0.049 wL2 = 2.27 kNm

Direction Y
Due Live Load
15.6 kN/m

3.3 m

Lx = 2.1 m
Ly = 3.3 m
Ly/Lx = 0.636

From tabel
Negative moment = 0.0410
Positive moment = 0.0310

Span = 3.3 m
Spacing Load = 1.00 m
Live load = 2.5 kN/m2
Finishes = 1.25 kN/m2
Rc Slab 150mm thk = 3.75 kN/m2

Factored Load = 10.50 kN/m2

UDL = 10.50 kN/m

Negative Moment, Msy=0.041 wL2 = 4.69 kNm

Positive moment, Msy=0.031 wL2 = 3.54 kNm

Page 5 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

DESIGN REINFORCEMENT

1a Design Negative Moment, Msx=0.065wL2 = 3.01 kNm

fck = 25 N/mm²
fyk = 500 N/mm²
b = 1000 mm
h = 150 mm
d = 122.5 mm
As = H10-150 = 523 mm²

Design for Bending Moment

Mrd = 62.65 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0080 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4)^(1/2)] = 121.63 mm

Tension reinforcement
As₁=MEd/0.87fykz = 56.89 mm² (required)
As,provided = 523 mm² OK

Min and max reinforcement

As,min = 163.07 mm²
As,max = 6000 mm²
As,min < As,provided < As, max OK

Deflection Check

Percentage of required tension reinforcement

ρ = Asreq/bd = 0.0005

Reference reinforcement ratio,

ρ₀ = (fck)^(1/2)x10^(-3) = 0.0050

Page 6 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

Factor for structural system, K = 1.0

ρ < ρ0 , Use equation (1)

(1) l/d = K[11+1.5√fck ρ0/ρ+3.2√fck(ρ0/ρ-1)^3/2] 88.4575 534.97 10.8

= 1x (11+ 88.457 + 534.97 = 634.431203 9.77
Modification factor for span less than 7 m = 1.0 30.5

Modification factor for steel area provided,

= As,prov / Asreq = 9.20 ≥ 1.5

Therefore allowable span-effective depth ratio,

(l/d) allowable = 951.65

Actual span-effective depth

(l/d) actual = 17.14 < (l/d) allowable OK

CRACKING

h = 200 ≤ 200
Main bar :
S max slabs : 3h ≤ 400mm = 400 mm
Max bar spacing = 125 mm < S max s OK

Secondary bar :
S max slabs : 3.5h ≤ 450mm = 450 mm
Max bar spacing = 125 mm < S max s OK

1b Design Positive moment, Msx=0.049 wL2 = 2.27 kNm

fck = 25 N/mm²
fyk = 500 N/mm²
b = 1000 mm
h = 150 mm
d = 122.5 mm
As = H10-150 = 523 mm²

Page 7 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

Design for Bending Moment

Mrd = 62.65 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0060 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4)^(1/2)] = 121.84 mm

Tension reinforcement
As₁=MEd/0.87fykz = 42.81 mm² (required)
As,provided = 523 mm² OK

Min and max reinforcement

As,min = 163.07 mm²
As,max = 6000 mm²
As,min < As,provided < As, max OK

1c Design Negative Moment, Msy=0.041 wL2 = 4.69 kNm

fck = 25 N/mm²
fyk = 500 N/mm²
b = 1000 mm
h = 150 mm
d = 122.5 mm
As = H10-150 = 523 mm²

Design for Bending Moment

Mrd = 62.65 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0125 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4)^(1/2)] = 121.13 mm

Tension reinforcement
As₁=MEd/0.87fykz = 88.97 mm² (required)

Page 8 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

As,provided = 523 mm² OK

Min and max reinforcement

As,min = 163.07 mm²
As,max = 6000 mm²
As,min < As,provided < As, max OK

1d Design Positive moment, Msy=0.031 wL2 = 3.54 kNm

fck = 25 N/mm²
fyk = 500 N/mm²
b = 1000 mm
h = 150 mm
d = 122.5 mm
As = H10-150 = 523 mm²

Design for Bending Moment

Mrd = 62.65 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0094 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4)^(1/2)] = 121.47 mm

Tension reinforcement
As₁=MEd/0.87fykz = 67.08 mm² (required)
As,provided = 523 mm² OK

Min and max reinforcement

As,min = 163.07 mm²
As,max = 6000 mm²
As,min < As,provided < As, max OK

Page 9 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

boundary line 31.118m 142° 57' 30"

boundary line 11.956m 53° 42' 30"

2a Design Calculation of Typical RC Slab 1st Storey

two adjacent side continuous 150mm THK

Direction X
Due Live Load
9 kN/m

3.5 m

Lx = 3.5 m
Ly = 6.97 m
Ly/Lx = 1.99 <2

Interpolation for tabel

Negative moment = 0.0900
Positive moment = 0.0680

Span = 3.5 m
Spacing Load = 1.00 m
Live load = 1.5 kN/m2
Finishes = 1.25 kN/m2
Rc Slab 150mm thk = 3.75 kN/m2

Page 10 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

Factored Load = 9.00 kN/m2

UDL = 9.00 kN/m

Negative Moment, Msx=0.90 wL2 = 9.92 kNm

Positive moment, Msx=0.068 wL2 = 7.50 kNm

Direction Y
Due Live Load
9 kN/m

6.97 m

Lx = 3.5 m
Ly = 6.97 m
Ly/Lx = 0.502

From tabel
Negative moment = 0.0490
Positive moment = 0.0370

Span = 6.97 m
Spacing Load = 1.00 m
Live load = 1.5 kN/m2
Finishes = 1.25 kN/m2
Rc Slab 150mm thk = 3.75 kN/m2

Factored Load = 9.00 kN/m2

UDL = 9.00 kN/m

Negative Moment, Msy=0.049 wL2 = 21.42 kNm

Positive moment, Msy=0.037 wL2 = 16.18 kNm

DESIGN REINFORCEMENT

2a Design Negative Moment, Msx=0.090wL2 = 9.92 kNm

Page 11 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

fck = 25 N/mm²
fyk = 500 N/mm²
b = 1000 mm
h = 150 mm
d = 122.5 mm
As = H10-150 = 523 mm²

Design for Bending Moment

Mrd = 62.65 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0264 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4)^(1/2)] = 119.57 mm

Tension reinforcement
As₁=MEd/0.87fykz = 190.77 mm² (required)
As,provided = 523 mm² OK

Min and max reinforcement

As,min = 163.07 mm²
As,max = 6000 mm²
As,min < As,provided < As, max OK

Deflection Check

Percentage of required tension reinforcement

ρ = Asreq/bd = 0.0016

Reference reinforcement ratio,

ρ₀ = (fck)^(1/2)x10^(-3) = 0.0050

Factor for structural system, K = 1.0

ρ < ρ0 , Use equation (1)

(1) l/d = K[11+1.5√fck ρ0/ρ+3.2√fck(ρ0/ρ-1)^3/2] 26.3786 57.61 3.21

Page 12 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

= 1x (11+ 26.379 + 57.61 = 94.989903 2.21

Modification factor for span less than 7 m = 1.0 3.29

Modification factor for steel area provided,

= As,prov / Asreq = 2.74 ≥ 1.5

Therefore allowable span-effective depth ratio,

(l/d) allowable = 142.48

Actual span-effective depth

(l/d) actual = 28.57 < (l/d) allowable OK

CRACKING

h = 200 ≤ 200
Main bar :
S max slabs : 3h ≤ 400mm = 400 mm
Max bar spacing = 125 mm < S max s OK

Secondary bar :
S max slabs : 3.5h ≤ 450mm = 450 mm
Max bar spacing = 125 mm < S max s OK

2b Design Positive moment, Msx=0.068 wL2 = 7.50 kNm

fck = 25 N/mm²
fyk = 500 N/mm²
b = 1000 mm
h = 150 mm
d = 122.5 mm
As = H10-150 = 523 mm²

Design for Bending Moment

Mrd = 62.65 kNm

MEd < MRd OK

Page 13 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

K = MEd/fckbd² = 0.0200 < 0.167

Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4)^(1/2)] = 120.30 mm

Tension reinforcement
As₁=MEd/0.87fykz = 143.26 mm² (required)
As,provided = 523 mm² OK

Min and max reinforcement

As,min = 163.07 mm²
As,max = 6000 mm²
As,min < As,provided < As, max OK

2c Design Negative Moment, Msy=0.049 wL2 = 21.42 kNm

fck = 25 N/mm²
fyk = 500 N/mm²
b = 1000 mm
h = 150 mm
d = 122.5 mm
As = H10-150 = 523 mm²

Design for Bending Moment

Mrd = 62.65 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0571 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4)^(1/2)] = 115.98 mm

Tension reinforcement
As₁=MEd/0.87fykz = 424.65 mm² (required)
As,provided = 523 mm² OK

Min and max reinforcement

As,min = 163.07 mm²

Page 14 of 71
Project title : PROPOSED CONDOMINIUM HOUSING DEVELOPMENT COMPRISING 12 BLOCKS OF 11/12/13 STOREY
04/05/2023

As,max = 6000 mm²

As,min < As,provided < As, max OK

2d Design Positive moment, Msy=0.037 wL2 = 16.18 kNm

fck = 25 N/mm²
fyk = 500 N/mm²
b = 1000 mm
h = 150 mm
d = 122.5 mm
As = H10-150 = 523 mm²

Design for Bending Moment

Mrd = 62.65 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0431 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4)^(1/2)] = 117.65 mm

Tension reinforcement
As₁=MEd/0.87fykz = 316.11 mm² (required)
As,provided = 523 mm² OK

Min and max reinforcement

As,min = 163.07 mm²
As,max = 6000 mm²
As,min < As,provided < As, max OK

Page 15 of 71
1 DESIGN CALCULATION OF 1HB1 150X400

19.879 kN/m

2.351
m

Span = 2.351 m
Loaded width = 1.725 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 19.879 kN/m

Moment max, MEd = 13.73 kNm

Shear max = 23.37 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 75.62 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0095 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 344.57 mm

Tension reinforcement
As₁=MEd/0.87fykz = 91.63 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 23.37 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
 VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.069 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

2 DESIGN CALCULATION OF 1HB2 150X400

13.596 kN/m

2.351
m

Span = 2.4 m
Loaded width = 1.118 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 13.596 kN/m
Moment max, MEd = 9.79 kNm
Shear max = 16.32 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 75.62 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0068 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 345.42 mm

Tension reinforcement
As₁=MEd/0.87fykz = 65.15 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 16.32 kN
 VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.048 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

3 DESIGN CALCULATION OF 1HB3 150X400

23.367 kN/m

3.2 m
Span = 3.2 m
Loaded width = 2.062 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 23.367 kN/m

Moment max, MEd = 29.91 kNm

Shear max = 37.39 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 75.62 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0206 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 341.05 mm

Tension reinforcement
As₁=MEd/0.87fykz = 201.60 mm² (required)
 As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 37.39 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.110 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

4 DESIGN CALCULATION OF 1HB4 150X400

 17.654 kN/m

2.4 m

Span = 2.4 m
Loaded width = 1.51 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 17.654 kN/m

Moment max, MEd = 12.71 kNm

Shear max = 21.18 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

 Mrd = 75.62 kNm
MEd < MRd OK
K = MEd/fckbd² = 0.0088 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 344.79 mm

Tension reinforcement
As₁=MEd/0.87fykz = 84.75 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 21.18 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.063 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

5 DESIGN CALCULATION OF 1HB5 150X400

 23.246 kN/m

2
m

Span = 2 m
Loaded width = 2.06 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 23.346 kN/m

Moment max, MEd = 11.67 kNm

Shear max = 23.35 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm
Design for Bending Moment

Mrd = 75.62 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0081 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 345.01 mm

Tension reinforcement
As₁=MEd/0.87fykz = 77.78 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 23.35 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.069 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm
6 DESIGN CALCULATION OF 1HB6 150X400

26.865 kN/m

2m

Span = 2 m
Loaded width = 2.4 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 26.865 kN/m

Moment max, MEd = 13.43 kNm

Shear max = 26.87 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 75.62 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0093 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 344.63 mm

Tension reinforcement
As₁=MEd/0.87fykz = 89.60 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 26.87 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)
 Shear reinforcement
Asw/s = 0.079 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

7 DESIGN CALCULATION OF 1HB7 230X500

26.831 kN/m

5.790
m

Span = 5.79 m
Loaded width = 2.55 m
Live Load = 1.5 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 2.875 kN/m
Factored Load = 9 kN/m2
Udl = 26.831 kN/m

Moment max, MEd = 112.44 kNm

Shear max = 77.68 kN
fck = 30 N/mm²
fyk = 500 N/mm²
b = 230 mm
h = 1000 mm
d = 947.5 mm
As = 7H-25 = 3434 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 862.07 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0042 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 944.00 mm

Tension reinforcement
As₁=MEd/0.87fykz = 273.81 mm² (required)
As,provided = 3434 mm² OK

Min and max reinforcement

As,min = 1261.31 mm²
As,max = 9200 mm²
As,min < As,provided < OK

Design for Shear

VEd = 77.68 kN
VRd,max = 0.36x25x230x947.5x(1-30/150)
cot θ + tan θ
 = 1882872
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 649.27 kN
using θ=45° = 941.436 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.084 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.8764 mm

8 DESIGN CALCULATION OF 1HB7a 230X1000

Due point load

273.524 kN

1.526
m

Span = 1.526 m
point load = 273.524 kN
Moment max, MEd = 417.40 kNm
Shear max = 273.52 kN

Due live load

28.772 kN/m
A

1.526
m

Span = 1.526 m
Loaded width = 2.55 m
Live Load = 1.5 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 4.3125 kN/m
Factored Load = 9 kN/m2
Udl = 28.772 kN/m

Moment max, MEd = 33.50 kNm

Shear max = 43.91 kN

Total Moment = 450.90 kNm

Total Shear = 317.43 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 230 mm
h = 1000 mm
d = 947.5 mm
As = 7H-25 = 3434 mm²
Asw/s ( link H10-150 = 1.047 mm
Design for Bending Moment

Mrd = 862.07 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0155 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 934.36 mm

Tension reinforcement
As₁=MEd/0.87fykz = 1026.94 mm² (required)
As,provided = 3434 mm² OK

Min and max reinforcement

As,min = 1261.31 mm²
As,max = 9200 mm²
As,min < As,provided < OK

Design for Shear

VEd = 273.52 kN
VRd,max = 0.36x25x230x697.5x(1-30/150)
cot θ + tan θ
= 1882872
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 649.27 kN
using θ=45° = 941.436 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.296 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.8764 mm
9 DESIGN CALCULATION OF 1HB8 230X1000

boundary line 31.118m 142° 57' 30"

boundary line 11.956m 53° 42' 30"

25.763 kN/m

6.315
m

Span = 6.315 m
Loaded width = 2 m
Live Load = 1.5 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 5.75 kN/m
Factored Load = 9 kN/m2
Udl = 25.763 kN/m

Moment max, MEd = 128.42 kNm

Shear max = 81.35 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 230 mm
h = 1000 mm
d = 947.5 mm
As = 7H-25 = 3434 mm²
Asw/s ( link H10-150 = 1.047 mm
Design for Bending Moment

Mrd = 862.07 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0048 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 943.50 mm

Tension reinforcement
As₁=MEd/0.87fykz = 312.91 mm² (required)
As,provided = 3434 mm² OK

Min and max reinforcement

As,min = 1261.31 mm²
As,max = 9200 mm²
As,min < As,provided < OK

Design for Shear

VEd = 81.35 kN
VRd,max = 0.36x25x230x947.5x(1-30/150)
cot θ + tan θ
= 1882872
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 649.27 kN
using θ=45° = 941.436 kN
 VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.088 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.8764 mm

10 DESIGN CALCULATION OF 1HB8a 230X1000

boundary line 31.118m 142° 57' 30"

boundary line 11.956m 53° 42' 30"

Due point load

297.477
kN

1.00 m

Span = 1 m
point load = 297.477 kN

Moment max, MEd = 297.48 kNm

Shear max = 297.48 kN
Due live load

25.763
kN/m A

1m

Span = 1 m
Loaded width = 2 m
Live Load = 1.5 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 5.75 kN/m
Factored Load = 9 kN/m2
Udl = 25.763 kN/m

Moment max, MEd = 3.22 kNm

Shear max = 12.88 kN

Total Moment = 300.70 kNm

Total Shear = 310.36 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 230 mm
h = 1000 mm
d = 947.5 mm
As = 7H-25 = 3434 mm²
Asw/s ( link H10-150 = 1.047 mm
 Design for Bending Moment

Mrd = 862.07 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0110 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 938.17 mm

Tension reinforcement
As₁=MEd/0.87fykz = 728.92 mm² (required)
As,provided = 3434 mm² OK

Min and max reinforcement

As,min = 1261.31 mm²
As,max = 9200 mm²
As,min < As,provided < OK

Design for Shear

VEd = 297.48 kN
VRd,max = 0.36x25x230x947.5x(1-30/150)
cot θ + tan θ
= 1882872
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 649.27 kN
using θ=45° = 941.436 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.322 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.8764 mm

11 DESIGN CALCULATION OF 1VB1 230X500

 boundary line 31.118m 142° 57' 30"
boundary line 11.956m 53° 42' 30"

37.316 kN/m

3.762
m

Span = 3.762 m
Loaded width = 3.715 m
Live Load = 1.5 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 2.875 kN/m
Factored Load = 9 kN/m2
Udl = 37.316 kN/m

Moment max, MEd = 66.02 kNm

Shear max = 70.19 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 230 mm
h = 500 mm
d = 447.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm
Design for Bending Moment

Mrd = 192.30 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0220 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 438.65 mm

Tension reinforcement
As₁=MEd/0.87fykz = 345.97 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 297.86 mm²
As,max = 4600 mm²
As,min < As,provided < OK

Design for Shear

VEd = 70.19 kN
VRd,max = 0.36x25x230x347.5x(1-30/150)
cot θ + tan θ
= 889272
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 306.65 kN
using θ=45° = 444.636 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.161 mm (required)
Asw/s,provided = 1.047 mm OK
 Min links required
Asw/s = 0.4382 mm

12 DESIGN CALCULATION OF 1VB2 150X400

DUE POINT LOAD

23.37 kN

A B

3.225 0.975
m m
4.2 m

Span = 4.2 m
a = 3.225 m
b = 0.975 m
Point Load = 23.367 kN

RA = 5.425 kN
RB = 17.943 kN
Moment max = 17.494 kN.m

DUE SELFWEIGHT
 14.704
kN/m

4.2 m

Span = 1.46 m
Loaded width = 1.225 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 14.704 kN/m

Moment max, MEd = 3.92 kNm

Shear max = 10.73 kN

Total Moment max, M=Ed 21.41 kNm

Total Shear max = 16.16 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

 Mrd = 75.62 kNm
MEd < MRd OK
K = MEd/fckbd² = 0.0027 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 346.67 mm

Tension reinforcement
As₁=MEd/0.87fykz = 25.98 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 10.73 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.032 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

13 DESIGN CALCULATION OF 1VB3 150X400

DUE POINT LOAD

21.184 kN 23.
36
7
kN
A B

0.94m 1. 0.975 m
0
7
2.
m
9
8
Span =5 2.985 m
a =m 0.94 m
b = 1.07 m
c = 0.975 m
Point Load 1 = 21.184 kN
Point Load 2 = 23.367 kN

RB = 22.406 kN
RA = 22.146 kN
Moment max = 20.817 kN.m

DUE SELFWEIGHT

14.445
kN/m

2.985
m

Span = 2.985 m
Loaded width = 1.2 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 14.445 kN/m

Moment max, MEd = 16.09 kNm

Shear max = 21.56 kN

Total Moment max, M=Ed 36.91 kNm

Total Shear max = 43.97 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 75.62 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0111 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 344.06 mm

Tension reinforcement
 As₁=MEd/0.87fykz = 107.50 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 21.56 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.064 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

14 DESIGN CALCULATION OF 1VB5 150X400

DUE POINT LOAD

21.184
kN

A B

0.94 m 2.045
m
2.985
m
Span = 2.985 m
a = 0.94 m
b = 2.045 m
Point Load = 21.184 kN

RA = 14.513 kN
RB = 6.671 kN
Moment max = 13.642 kN.m

DUE SELFWEIGHT

14.704
kN/m

2.985
m

Span = 2.985 m
Loaded width = 3.45 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 37.733 kN/m
Moment max, MEd = 42.03 kNm
Shear max = 56.32 kN

Total Moment max, M=Ed 55.67 kNm

Total Shear max = 70.83 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 75.62 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0290 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 338.37 mm

Tension reinforcement
As₁=MEd/0.87fykz = 285.52 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

 VEd = 56.32 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.166 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

13 DESIGN CALCULATION OF 1VB6 150X400

14.49 kN/m

4.8 m
Span = 4.8 m
Loaded width = 1.1 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 2.3 kN/m
Factored Load = 10.35 kN/m2
Udl = 14.490 kN/m

Moment max, MEd = 41.73 kNm

Shear max = 34.78 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 75.62 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0288 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 338.43 mm

Tension reinforcement
As₁=MEd/0.87fykz = 283.46 mm² (required)
As,provided = 981 mm² OK
 Min and max reinforcement
As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 34.78 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.103 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

14 DESIGN CALCULATION OF 1VB7 150X400

boundary line 11.958m 233° 49' 30"

 25.313 kN/m

4.3 m

Span = 4.3 m
Loaded width = 2.25 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 25.313 kN/m

Moment max, MEd = 58.50 kNm

Shear max = 54.42 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 150 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

 Mrd = 75.62 kNm
MEd < MRd OK
K = MEd/fckbd² = 0.0404 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 334.65 mm

Tension reinforcement
As₁=MEd/0.87fykz = 401.89 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 2400 mm²
As,min < As,provided < OK

Design for Shear

VEd = 54.42 kN
VRd,max = 0.36x25x150x347.5x(1-30/150)
cot θ + tan θ
= 450360
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 155.30 kN
using θ=45° = 225.18 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.161 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm

15 DESIGN CALCULATION OF 1HB3a 230X400

boundary line 11.958m 233° 49' 30"

 boundary line 11.958m 233° 49' 30"

DUE POINT LOAD

54.42 kN

1.315m

Span = 1.315 m
Point Load = 54.422 kN

RA = 54.422 kN
Moment max = 71.565 kN.m

DUE SELFWEIGHT

A 23.346
kN/m

1.315m

Span = 1.315 m
Loaded width = 2.06 m
Live Load = 1.5 kN/m2
Partition = 1 kN/m2
Finishes = 1.25 kN/m2
Slab Selfweight 150 = 3.75 kN/m2
Selfweight Beam = 1.5 kN/m
Factored Load = 10.35 kN/m2
Udl = 23.346 kN/m

Moment max, MEd = 20.19 kNm

Shear max = 30.70 kN

Total Moment max, M=Ed 91.75 kNm

Total Shear max = 85.12 kN

fck = 30 N/mm²
fyk = 500 N/mm²
b = 230 mm
h = 400 mm
d = 347.5 mm
As = 2H-25 = 981 mm²
Asw/s ( link H10-150 = 1.047 mm

Design for Bending Moment

Mrd = 115.96 kNm

MEd < MRd OK
K = MEd/fckbd² = 0.0139 < 0.167
Compression reinforcement is not required
z = d[0.5+(0.25-3k/3.4= 343.18 mm

Tension reinforcement
As₁=MEd/0.87fykz = 135.22 mm² (required)
As,provided = 981 mm² OK

Min and max reinforcement

As,min = 185.04 mm²
As,max = 3680 mm²
As,min < As,provided < OK

Design for Shear

VEd = 30.70 kN
VRd,max = 0.36x25x230x347.5x(1-30/150)
cot θ + tan θ
= 690552
cot θ + tan θ
cot θ=22° = 2.5
cot θ=45° = 1
using θ=22° = 238.12 kN
using θ=45° = 345.276 kN
VEd < VRd = OK (Using θ=22°)

Shear reinforcement
Asw/s = 0.091 mm (required)
Asw/s,provided = 1.047 mm OK

Min links required

Asw/s = 0.3505 mm
1 Design Rc Column C9

31.118m 142° 57' 30"

boundary line
boundary line 11.956m 53° 42' 30"

Consider Column C9 : 1st Storey

fck = 25 N/mm²
fyk = 500 N/mm²
Main bar = 4-H16
Link = H10-150
Cover = 25 mm
N = 273.523856 kN
b = 230 mm
h = 230 mm

Clear Height : 3700-500 = 3200 mm

Effective Height = 2400 mm
i) h/30 = 7.667 mm
ii) Effective Height /b = 10.435 mm
iii) = 18.101 mm
Adopt = 18 mm
Me = 4.92 kNm
M = 4.92 kNm

d2 = 45 mm
d2/h = 0.196
 M/bh2fck = 0.016
N/bhfck = 0.21

Asfyk/bhfck = 0
As min = 0.4 % = 212 mm²

4 H16 = 803.84 mm² OK

2 Design Rc Column C10

31.118m 142° 57' 30"

boundary line

boundary line 11.956m 53° 42' 30"

Consider Column C10 : 1st Storey

fck = 25 N/mm²
fyk = 500 N/mm²
Main bar = 4-H16
Link = H10-150
Cover = 25 mm
N = 272.410106 kN
b = 230 mm
h = 230 mm

Clear Height : 3700-500 = 3200 mm

Effective Height = 2400 mm
i) h/30 = 7.667 mm
ii) Effective Height /b = 10.435 mm
iii) = 18.101 mm
 Adopt = 18 mm
Me = 4.90 kNm
M = 4.90 kNm

d2 = 45 mm
d2/h = 0.196

M/bh2fck = 0.016
N/bhfck = 0.21

Asfyk/bhfck = 0
As min = 0.4 % = 212 mm²

4 H16 = 803.84 mm² OK

3 Design Rc Column C11

31.118m 142° 57' 30"

boundary line

boundary line 11.956m 53° 42' 30"

Consider Column C11 : 1st Storey

fck = 25 N/mm²
fyk = 500 N/mm²
Main bar = 4-H16
Link = H10-150
Cover = 25 mm
N = 297.476981 kN
b = 230 mm
 h = 230 mm

Clear Height : 3700-500 = 3200 mm

Effective Height = 2400 mm
i) h/30 = 7.667 mm
ii) Effective Height /b = 10.435 mm
iii) = 18.101 mm
Adopt = 18 mm
Me = 5.35 kNm
M = 5.35 kNm

d2 = 45 mm
d2/h = 0.196

M/bh2fck = 0.018
N/bhfck = 0.22

Asfyk/bhfck = 0
As min = 0.4 % = 212 mm²

4 H16 = 803.84 mm² OK

4 Design Rc Column C12

31.118m 142° 57' 30"
boundary line

boundary line 11.956m 53° 42' 30"

Consider Column C12 : 1st Storey

fck = 25 N/mm²
fyk = 500 N/mm²
Main bar = 4-H16
Link = H10-150
Cover = 25 mm
N = 310.361888 kN
b = 230 mm
h = 230 mm

Clear Height : 3700-500 = 3200 mm

Effective Height = 2400 mm
i) h/30 = 7.667 mm
ii) Effective Height /b = 10.435 mm
iii) = 18.101 mm
Adopt = 18 mm
Me = 5.59 kNm
M = 5.59 kNm

d2 = 45 mm
d2/h = 0.196

M/bh2fck = 0.018
N/bhfck = 0.23

Asfyk/bhfck = 0
As min = 0.4 % = 212 mm²

4 H16 = 803.84 mm² OK

 Footing

1 Design of Footing 1000 X 1000 X 300

Assume diameter of bars = 13 mm

Design Life = 50 years
Exposure Class = XC2
fck = 25 N/mm2
fyk = 500 N/mm2
Density Concrete = 25 kN/m3
Soil Bearing Capacity = 75 kN/m2
Structural Class = 3

Durability and Bond Requirements

cmin,b = 13 mm
cmin,dur = 20 mm
△ cdev = 10 mm
cnom = 75 mm

Effective Depth
D = 300 mm
dm = 219 mm

Design of Footing
- Loading
Factored Load from Column = 310.36 kN

Soil Bearing Capacity = 75 kN/m²

- Dimensions
Distance from face column to end = 0.885 m
h = 0.30 m
Width = 2.1 m
Length = 2.1 m
Footing Area = 4.41 m²

Bearing Pressure = 70.38 kN/m² OK

- Design of Shear resistance

Length of Column = 230.00 mm
Perimeter of Column = 920.00 mm
d = 219 mm
Vrd,max = 0.5ud[0.6(1-fck/250)](fck/1.5) = 904.59 kN > 310.36 kN OK

- Punching Shear
Basic Control Perimeter = 3666.11 mm
Area Within Perimeter = 1054964.60 mm2
Punching Shear Force, Ved = 236.12 kN
Punching Shear Stress, ved = 0.295 N/mm2 < 0.50 N/mm2 OK
*Depth of 300mm is ok

- Bending Reinforcement
Med = 61.68 kNm
For the Concrete
Mbal = 418.58 kNm OK
K = 0.025
z = 0.978 d ≤ 0.95 d
As = 683.082 mm2
- Provide H16-150c/c
As,prov = 1339.733 mm2 OK
- Check area of steel provided is within limits required by code, that is
As,min = 0.2920 % > 0.130 % OK
As,max = 0.2127 % < 4.00 % OK
Steel Percentage therefore is within limits specified by code

- Final Check on Punching Shear

ρ1 = 0.0015 ≤ 0.25 %
vrdc = 0.50
Shear Resistance of the concrete = 403.33 kN > 236.12 kN OK

- Maximum Shear Force

 Design Shear, VEd = 139.39 kN
VRd,c = 458.85 kN > 139.39 kN OK

Weight of footing can be allowed by using a net safe bearing pressure ρ net
ρnet = 75.00 kN/m2
Required base area = 4.14 m2 < 4.41 m2 OK

2 Design of Footing 2550 X 1000 X 300

LOAD ON C1 (LEFT SIDE)

Dead Load = 19.508 kN
Live Load = 6.036 kN
Factored Load = 35.390 kN
Service Load = 25.544 kN

LOAD ON C2 ( RIGHT SIDE)

Dead Load = 35.629 kN
Live Load = 11.561 kN
Factored Load = 65.441 kN
Service Load = 47.190 kN

Factored load on footing = 100.83 kN

service load = 72.73 kN
soil bearing capacity = 75 kN/m²

width = 1 m
length = 2.55 m
Footing Area = 2.55 m²

bearing pressure = 28.52 kN/m² OK

Soil pressure at ultimate

ultimate load = 100.83 kN

soil pressure at ultimate load = 39.54 kN/m²

soil pressure per m length = 39.54 kN/m

max moment = 21.59 kNm

h = 300.00 mm
d = h - cnom- 1.5φbar = 245.50 mm

fck = 30 N/mm2
fyk = 500 N/mm2
K = M/fckbd²
K = 0.012 < 0.167
Compression reinforcement is not required

z = d(0.5+(0.25-K/1.134)^(0.5))
z = 243
use 0.95d = 233.23 <z

As₁=M/0.87fykz
As₁ = 212.81 mm2/m
Provided As₁, (T13 @ 125mm c/c = 3416 mm2/m OK

As,min = 319.15 mm²/m