Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    Untitled

    Uploaded by

    Gada Robale
    1. The document provides specifications for an LED street lighting project in Waliso-UHDP-CW-017-2014 located inside Holiso Town, including excavation and earth works, masonry works, concrete works, fixtures and finishes, and a transformer pillar. 2. It describes the excavation of pits and trenches, backfilling, and removal of excess materials. It also outlines the construction of masonry walls and reinforced concrete columns, beams, and slabs to form the light pole foundations and transformer pillar. 3. Fixtures include LED street lighting systems, cables, and a control box to be installed on the concrete structures. Poles, arms, and other accessories are also specified.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Untitled

    Uploaded by

    Gada Robale
    17 views9 pages
    1. The document provides specifications for an LED street lighting project in Waliso-UHDP-CW-017-2014 located inside Holiso Town, including excavation and earth works, masonry works, concrete works, fixtures and finishes, and a transformer pillar. 2. It describes the excavation of pits and trenches, backfilling, and removal of excess materials. It also outlines the construction of masonry walls and reinforced concrete columns, beams, and slabs to form the light pole foundations and transformer pillar. 3. Fixtures include LED street lighting systems, cables, and a control box to be installed on the concrete structures. Poles, arms, and other accessories are also specified.

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides specifications for an LED street lighting project in Waliso-UHDP-CW-017-2014 located inside Holiso Town, including excavation and earth works, masonry works, concrete works, fixtures and finishes, and a transformer pillar. 2. It describes the excavation of pits and trenches, backfilling, and removal of excess materials. It also outlines the construction of masonry walls and reinforced concrete columns, beams, and slabs to form the light pole foundations and transformer pillar. 3. Fixtures include LED street lighting systems, cables, and a control box to be installed on the concrete structures. Poles, arms, and other accessories are also specified.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    17 views9 pages

    Untitled

    Uploaded by

    Gada Robale
    1. The document provides specifications for an LED street lighting project in Waliso-UHDP-CW-017-2014 located inside Holiso Town, including excavation and earth works, masonry works, concrete works, fixtures and finishes, and a transformer pillar. 2. It describes the excavation of pits and trenches, backfilling, and removal of excess materials. It also outlines the construction of masonry walls and reinforced concrete columns, beams, and slabs to form the light pole foundations and transformer pillar. 3. Fixtures include LED street lighting systems, cables, and a control box to be installed on the concrete structures. Poles, arms, and other accessories are also specified.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 9

    -

    Description
    A. SUB STRA CTVRE
    1 EXCA 1 -1 TION AND EARTH WORK
    Pit Excavation for pole of 80cmx80cm not exceeding to depth of 150cm
    from OGLat 30M interval and as per th
    engineer's order

    Excavation for laying pvc,


    demolishing exsting
    lerazzo. cobblestone .etc. Price should include
    reconstructing cobble stone.terrazzoo of the same
    amount of cobble stone&terazzo

    Well compacted back fill after laying PVC pipe and


    casting concrete footing using selecting material.
    Cart away for surplus excavated materials where by the
    order of site Engineer .
    Total carried to summary
    2. Concrete work (Pole foundation)
    10cm thick lean concrete under Pit (C-7)
    Reinforced concrete class C-25 pole foundation
    Provide, cut and fix in position for form work for footing

    by the order of site Engineer

    Use Tie stirrups 08mm Hqrizontal mesh as site engineer


    recommendation

    Use steel reinforcement of 0 10mm vertical mesh pole

    foundation

    supply and install J-bolt of 1.8 length . diamete 24mm

    with nut and washer


    Total carried to summary
    B. Electromechanical Works
    3.EXTENAL LIGHTING AUNDER GROUND
    CABLES
    Supply and install flexible non metalic or PVC
    pipes of outer diameter 50mm
    Supply and istall flexible HDP pipes of outer
    diameter 75mm
    Supply and istall 4 wire .3 phase of 4*l6mm2under
    ground CU/XLPE/PVC/PVC cable
    (upply and istall 4 wire . 3 phase of 4*!6mm2under
    •round CU/XLPE/PVC/PVC cable from KWH metre
    o Electric Board and pole
    pply and istall cable connector within cable
    ermination
    c able joint box
    Supply and fix ! 6.4 fuse A fine bolder at the base of
    the pole connecting the cablex
    Total carried to summary

    4 FIXTURES FINISHINGS
    supply and install a copper conductor. PVC
    sheathed 0.6/1 KV 2x2.5ntm2 cable from the box at
    the bottom of the pole to the lamp

    Supply and install oj high impact energy efficient street


    lighting system fixtures with LED street lights which is
    equiped with LED driver of input AC voltage 180-270
    and output DC voltage 24-36 Quality certificate ISO
    or CE and Lab test certificate for LED lamps is
    mandatory. It has also SPD of at least 10 Kt7 ,
    die cast
    Aluminium closures LED street light must be of
    120watt.

    Total carried to summary


    5. REDDER PILLAR
    Supply, fix, and test, then commission MDB external
    lighting control box, factory-made, containing three
    phase switch of 100A, two circuit breakers of80A,
    two contactors of 80A, 25 A photocell and 25 A timer
    controller, 80A Bus-bars, waterproof and protection
    materials, and all other accessories as per
    standards, the 'Standards' documents of the control
    box shall be approved by the employer's engineer of
    80*80*60cm .Supply and Install 2.5 meter Painted
    RUS Iron Pole for Hang made from 1.25cm thick
    steel sheet tube fixed at RC footing of 50*50*70cm

    Total carried to summary


    6 POLES & ARM

    Supply, erect (Install), test and commission of 7m high


    external coaled. 3.0mm thick galvanized circular street
    lighting pole with bottom diameter 180mm. top diameter
    70mm with standing a gusted wind velocity of 1

    60km/hr
    screws & cover all material utilized by pole should be
    high quality product , manufacturer Authorization
    ,ISO of manufacturing company &. CE of the products,
    thickness of 3.0mm, baseplate 330x330x1 Omni with
    single arm standard and pipe type bracket 1500mm long
    and 100mm long 60mm diameter and with all
    accessories, tying nuts, washer.melal plate.cost should
    include flag holder Shall be as included on the detail
    drawing. ----------

    Total carried to summary


    TOTAL
    VAT
    GRAND TOTAL

    Prepared By. -----------


    Sign ________________________
    Date _
    Checked By_
    Sign ____
    Date _ —
    LED Streetlight Waliso-UHDP-CW- 017-2014
    Locations In Side H'oliso Town
    Description
    A .Sub Structure
    L Excavation and Earth work

    ■ faring over site to remove all objectionable materials and


    .e tablcs to an average depth of 20 cm. ___

    / rench excavation for masonary wall in ordinary foil to a


    depth
    of 7Qcm starting from reduced level __

    Hack fill with compaction around and below fooling pad w uh


    non expansive granular selected material from selected

    Cort away surplus unwanted excavated material anddepout


    at
    L distance not exceeding 2km from out the of site.
    Total Carried to summary Birr
    __2. Masoiian Work _______

    An average of 50cm thick hard tracheytic stone masonry


    wall bedded in cement mortar 1
    :3 __

    An average of 25cm thick hard tracheytic crushed stone for


    upper and lower pans of masonary on selected soil with
    cement mortar 1
    :3
    4cm thick cement screed copping at the top of Rc slab with
    cement mortar 1
    :3 ratio
    Total Carried to summary Birr __________________
    Total-A
    B. Super Structure
    I. Concrete Work

    Reinforced concrete quality c-25 with 360kgcemcnt M of


    concrete filled m to form work and vibrated around rod
    reinforcement bars __
    a In elevation columns
    b Grade beams and Tie beams ___
    c suspending slab 20cm thickness

    provide . cut and fix in position metal pane! or sou n cigba


    form
    work
    _______

    A ir according to Mnctxrul dnn <ng Price


    U i cutting be/>di*g. otpo * <f

    beam and grade beams.


    Diameter 12 mm deformed bars for Tup Slab
    1 'tameter Xmm de termed bars f>r S':

    2 finishing wyrh

    finishing Mtvi shall imlude all surface pre-cleuAOtg


    preparation uppluxitusn of finish. pduhsng and lieana at the
    end <f finishing wank.
    J, TRIXSFOIWFR
    USUI RUFO M IMA
    n Side H'oliso Town

    You might also like