SEVERN GLOCON CONTROL VALVE

F96&97, SIPCOT Industrial Park, SPECIFICATION SHEET

Irungattukkottai, Chennai 602 117, India.
Tel: +91 44 4710 4200 Fax: +91 44 4710 0073 Program Version 7.275SL / EnqRep69
Customer INOX Air Products Private Limited Quotation No CQ 70062
Enquiry Ref. Email SG Order / Item No. DOM/8745/20 1
Order No. 4500224765 Quantity 1
Tag Nos. FV-2020-1
Application GOX TO CUSTOMER
Project Title AMNS-700 TPD-GOX Control Valve Serial Nos 8745-001-001
1 FLUID Oxygen / Gas CRITICAL PRESSURE 49.539 bar(a)
UNITS CASE 1 CASE 2 CASE 3 CASE 4 CASE 5 CASE 6 SHUT-OFF
2 FLOW RATE kg/hr 18164.6 16513.4 16515.8 10821.0
3 INLET PRESSURE bar(a) 31.41 31.41 31.41 31.41 40 bar
4 OUTLET PRESSURE bar(a) 31.21 31.21 17.01 16.20
PROCESS DATA

5 INLET TEMPERATURE °C 32 32 32 16
6 MOL. WEIGHT 32.03 32.03 32.03 32.03
7 SP. HEAT RATIO 1.40 1.40 1.40 1.40
8 COMPRESSIBILITY 0.98 0.98 0.98 0.97
9 2 PHASE VAP. MW
10 2 PHASE MIX IN / OUT % by wt
11 CALCULATED Cv 238.00 216.30 30.48 19.09
12 PERCENTAGE OPEN % 70 68 21 13
13 SPL AT 1 METRE dBA <75 <75 77.4 76.5
14 INLET VELOCITY m/s 4.0 3.6 3.6 2.2
15 OUTLET VELOCITY Mach 0.01 0.01 0.02 0.01
17 IN PIPE SIZE / SCH 10 ins / STD ACTUATOR TYPE Pneumatic Cylinder 46
18 OUT PIPE SIZE / SCH 10 ins / STD ACTUATOR MODEL / STROKE P2CN 5 ins 47
PIPE

19 INSULATION - SIZE / SPRING 100 sq.in / STD/IN 48

ACTUATOR
20 DESIGN PRESSURE 40 bar(g) FAIL ACTION Modulating AFC 49
21 DESIGN TMP. MIN/MAX -20°C / 65°C MIN.AIR SUPPLY / SET AT 3 / 3 bar(g) 50
22 VALVE MODEL NO. 5413 ACT. ORIENTATION Vertical 51
23 SIZE / CLASS 8 ins / ASME 600 HANDWHEEL None 52
24 BODY STYLE Globe TRAVEL STOPS None 53
BODY

25 BODY MATERIAL HT Brass EN1982 Gr. CC765S TUBING Metric 316 / 316L SS 54
26 END CONNECTIONS Integral Flange as Body FITTINGS Panam 316 / 316L SS 55
27 END FINISH / PREP. RF(125-250 AARH)3.2-6.3um OPEN / CLOSE / TRIP TIME <5s / <5s / 56
28 BODY F/F DIMS. ANSI/ISA-75.08.01-2016 FL POSITIONER MANF / MODEL See note N4. 57
29 BONNET TYPE Standard SIGNAL ACTION 4mA=close / 20mA=open 58
30 BONNET MATERIAL As Valve Body AIRSET MANF / MODEL See note N6. 59

ACCESSORIES
31 None 60
BONNET

EXTENSION DIMS. L. SWITCH / P. TRANS TYPE

32 BODY/BONNET NDE 1 See note N1. L. SWITCH / P. TRANS POS'N N/A 61
33 BODY/BONNET NDE 2 N/A BOOSTERS 2 no's, 1/2" NPT,Al MOC (Model: IB43) 62
34 BONNET BOLTING See note N3. PILOT VALVES None 63
35 GASKET MATERIAL Spriral Wound Monel/Graph** AIRLOCK VALVE None 64
36 GLAND PACKING PTFE Chevrons** IP CONV'TR MANF/MODEL None 65
37 SEAT SIZE INS / TYPE 5.25 Cage 1CC SOLENOID MODEL 1/4"Asco 3/2 Br. IP66 Exd 66
38 Cv / CHARACTERISTIC 400 Equal Percent SOLENOID ACTION De-energise = Close 67
39 BALANCING PTFE Seal** AIR RECEIVER None 68
40 FLOW DIRECTION Under TESTING See note N5. 69
TRIM

41 TRIM MATERIAL Monel 400/Colmonoy coating * CE CERTIFICATION N/A 70

MISC
42 SOFT SEAT PTFE** CLEANING Clean for Oxygen Service 71
43 SEAT LEAKAGE ANSI Class VI PAINT FINISH See note N9. 72
44 BELLOWS MATERIAL None PARTS CERTIFICATION See note N10. 73
45 BAFFLES None 74
Notes Revisions
75 N1 DPE-Body/Bnt Castings/Forgings to ASME B16.34 at Foundry/Forge Rev By Date
76 N3 A320Gr B8M CL 2 Bolt/A194Gr 8M SH Nut StSt -325 to 1000degF PO PMP 18-Feb-21
77 N4 Siemens SMART HART Positioner, Model : 6DR5220-0EM00-0AA0, Polycarbonate Enclosure, Exia. 1 PMP 5-May-21
78 N5 Standard material and factory testing with certification.
79 N6 Airset: 1/2" NPT Shavo, Al Encl, 5µ Sint.Bronze Filter, Model: SB20T-4N-M6D/RNMN + SS Gauge
80 N7 ASCO SOV; Model No: NFET,8327B002,24V DC, SS Body, Exd
81 N9 Factory standard paint finish (Body : No Paint ; Actuator : RAL-5017 Blue)
82 N10 3.1 Certs, Body/Bonnet & Bolting
83 Actuator MOC shall be Carbon Steel
84 Pneumatic Connection 1/2" NPT , Electrical Connection 1/2" NPT
85 Oxygen Cleaning & De-greasing requirements shall be as per SGI procedure SGI/OP/111.
86 * Cage MOC shall be LG2 Bronze.
BAM certified soft parts (Gasket - Sigraflex Type E Folie; Gland Packing, Soft Seat & Balance Seal - Dyneon TF 4303) are
87 ** offered.
88 Valve Face to Face dimension as per ANSI/ISA-75.08.01
89 Valve end connection shall be as per ASME B16.5
QMD 7.0.2 rev 2
 SEVERN GLOCON CONTROL VALVE
F96&97, SIPCOT Industrial Park, SIZING DATASHEET
Irungattukkottai, Chennai 602 117, India.
Tel: +91 44 4710 4200 Fax: +91 44 4710 0073 Program Version 7.275SL / EnqRep69
Customer INOX Air Products Private Limited Quotation No CQ 70062
Enquiry Ref. Email SG Order / Item No. DOM/8745/20 1
Order No. 4500224765 Quantity 1
Tag Nos. FV-2020-1
Application GOX TO CUSTOMER
Project Title AMNS-700 TPD-GOX Control Valve Serial Nos 8745-001-001

Inherent Valve Characteristic

450

400
VALVE INSTALLED Cv

350

300

250

200

150

100

50

0
0 10 20 30 40 50 60 70 80 90 100

% PERCENTAGE LIFT/OPENING
QMD 7.0.2 rev 2
 SEVERN GLOCON CONTROL VALVE
F96&97, SIPCOT Industrial Park, SPECIFICATION SHEET
Irungattukkottai, Chennai 602 117, India.
Tel: +91 44 4710 4200 Fax: +91 44 4710 0073 Program Version 7.275SL / EnqRep69
Customer INOX Air Products Private Limited Quotation No CQ 70062
Enquiry Ref. Email SG Order / Item No. DOM/8745/20 2
Order No. 4500224765 Quantity 1
Tag Nos. FV-2020-2
Application HP GOX VENT
Project Title AMNS-700 TPD-GOX Control Valve Serial Nos 8745-002-001
1 FLUID Oxygen / Gas CRITICAL PRESSURE 50.5 bar(a)
UNITS CASE 1 CASE 2 CASE 3 CASE 4 CASE 5 CASE 6 SHUT-OFF
2 FLOW RATE kg/hr 39679.2 33066.0 10150.0
3 INLET PRESSURE bar(a) 31.34 31.34 31.34 40 bar
4 OUTLET PRESSURE bar(a) 2.50 2.00 2.00
PROCESS DATA

5 INLET TEMPERATURE °C 32 32 32
6 MOL. WEIGHT 32.03 32.03 32.03
7 SP. HEAT RATIO 1.40 1.40 1.40
8 COMPRESSIBILITY 0.98 0.98 0.98
9 2 PHASE VAP. MW
10 2 PHASE MIX IN / OUT % by wt
11 CALCULATED Cv 63.95 53.30 16.36
12 PERCENTAGE OPEN % 40 33 10
13 SPL AT 1 METRE dBA 94.0 94.8 88.1
14 INLET VELOCITY m/s 8.7 7.3 2.2
15 OUTLET VELOCITY Mach 0.33 0.34 0.11
17 IN PIPE SIZE / SCH 8 ins / STD ACTUATOR TYPE Pneumatic Cylinder 46
18 OUT PIPE SIZE / SCH 8 ins / STD ACTUATOR MODEL / STROKE P2CN 4 ins 47
PIPE

19 INSULATION SIZE / SPRING 100 sq.in / STD/IN 48

ACTUATOR
20 DESIGN PRESSURE 40 bar(g) FAIL ACTION Modulating AFC 49
21 DESIGN TMP. MIN/MAX -20°C / 65°C MIN.AIR SUPPLY / SET AT 3 / 3 bar(g) 50
22 VALVE MODEL NO. 5413 ACT. ORIENTATION Vertical 51
23 SIZE / CLASS 8 ins / ASME 600 HANDWHEEL None 52
24 BODY STYLE Globe TRAVEL STOPS None 53
BODY

25 BODY MATERIAL HT Brass EN1982 Gr. CC765S TUBING Metric 316 / 316L SS 54
26 END CONNECTIONS Integral Flange as Body FITTINGS Panam 316 / 316L SS 55
27 END FINISH / PREP. RF(125-250 AARH)3.2-6.3um OPEN / CLOSE / TRIP TIME <5s / <5s / 56
28 BODY F/F DIMS. ANSI/ISA-75.08.01-2016 FL POSITIONER MANF / MODEL See note N4. 57
29 BONNET TYPE Standard SIGNAL ACTION 4mA=close / 20mA=open 58
30 BONNET MATERIAL As Valve Body AIRSET MANF / MODEL See note N6. 59

ACCESSORIES
31 None 60
BONNET

EXTENSION DIMS. L. SWITCH / P. TRANS TYPE

32 BODY/BONNET NDE 1 See note N1. L. SWITCH / P. TRANS POS'N N/A 61
33 BODY/BONNET NDE 2 N/A BOOSTERS 2 no's, 1/2" NPT,Al MOC (Model: IB43) 62
34 BONNET BOLTING See note N3. PILOT VALVES None 63
35 GASKET MATERIAL Spriral Wound Monel/Graph** AIRLOCK VALVE None 64
36 GLAND PACKING PTFE Chevrons** IP CONV'TR MANF/MODEL None 65
37 SEAT SIZE INS / TYPE 3.625 Cage 3CC SOLENOID MODEL 1/4"Asco 3/2 Br. IP66 Exd 66
38 Cv / CHARACTERISTIC 140 Linear SOLENOID ACTION De-energise = Close 67
39 BALANCING PTFE Seal** AIR RECEIVER None 68
40 FLOW DIRECTION Under TESTING See note N5. 69
TRIM

41 TRIM MATERIAL Monel 400/Colmonoy coating * CE CERTIFICATION N/A 70

MISC
42 SOFT SEAT PTFE** CLEANING Clean for Oxygen Service 71
43 SEAT LEAKAGE ANSI Class VI PAINT FINISH See note N9. 72
44 BELLOWS MATERIAL None PARTS CERTIFICATION See note N10. 73
45 BAFFLES None 74
Notes Revisions
75 N1 DPE-Body/Bnt Castings/Forgings to ASME B16.34 at Foundry/Forge Rev By Date
76 N3 A320Gr B8M CL 2 Bolt/A194Gr 8M SH Nut StSt -325 to 1000degF PO PMP 18-Feb-21
77 N4 SiemensSMART HART Positioner, Model : 6DR5220-0EM00-0AA0, Polycarbonate Enclosure, Exia.
78 N5 Standard material and factory testing with certification.
79 N6 Airset: 1/2" NPT Shavo, Al Encl, 5µ Sint.Bronze Filter, Model: SB20T-4N-M6D/RNMN + SS Gauge
80 N7 ASCO SOV; Model No: NFET,8327B002,24V DC, SS Body, Exd
81 N9 Factory standard paint finish (Body : No Paint ; Actuator : RAL-5017 Blue)
82 N10 3.1 Certs, Body/Bonnet & Bolting
83 Actuator MOC shall be Carbon Steel
84 Pneumatic Connection 1/2" NPT , Electrical Connection 1/2" NPT
85 Oxygen Cleaning & De-greasing requirements shall be as per SGI procedure SGI/OP/111.
86 * Inner Cage MOC shall be LG2 Bronze.
BAM certified soft parts (Gasket - Sigraflex Type E Folie; Gland Packing, Soft Seat & Balance Seal - Dyneon TF 4303) are
87 ** offered.
88 Valve Face to Face dimension as per ANSI/ISA-75.08.01
89 Valve end connection shall be as per ASME B16.5
QMD 7.0.2 rev 2
 SEVERN GLOCON CONTROL VALVE
F96&97, SIPCOT Industrial Park, SIZING DATASHEET
Irungattukkottai, Chennai 602 117, India.
Tel: +91 44 4710 4200 Fax: +91 44 4710 0073 Program Version 7.275SL / EnqRep69
Customer INOX Air Products Private Limited Quotation No CQ 70062
Enquiry Ref. Email SG Order / Item No. DOM/8745/20 2
Order No. 4500224765 Quantity 1
Tag Nos. FV-2020-2
Application HP GOX VENT
Project Title AMNS-700 TPD-GOX Control Valve Serial Nos 8745-002-001

Inherent Valve Characteristic

160
VALVE INSTALLED Cv

140

120

100

80

60

40

20

0
0 10 20 30 40 50 60 70 80 90 100

% PERCENTAGE LIFT/OPENING
QMD 7.0.2 rev 2
 SEVERN GLOCON CONTROL VALVE
F96&97, SIPCOT Industrial Park, SPECIFICATION SHEET
Irungattukkottai, Chennai 602 117, India.
Tel: +91 44 4710 4200 Fax: +91 44 4710 0073 Program Version 7.275SL / EnqRep69
Customer INOX Air Products Private Limited Quotation No CQ 70062
Enquiry Ref. Email SG Order / Item No. DOM/8745/20 3
Order No. 4500224765 Quantity 1
Tag Nos. FV-2020-3
Application FLOW CONTROL ON HP GOX PRODUCT
Project Title AMNS-700 TPD-GOX Control Valve Serial Nos 8745-003-001
1 FLUID Oxygen / Gas CRITICAL PRESSURE 49.539 bar(a)
UNITS CASE 1 CASE 2 CASE 3 CASE 4 CASE 5 CASE 6 SHUT-OFF
2 FLOW RATE kg/hr 18164.6 16513.4 16513.4 10821.0
3 INLET PRESSURE bar(a) 31.41 31.41 31.41 31.41 40 bar
4 OUTLET PRESSURE bar(a) 31.21 31.21 17.01 16.20
PROCESS DATA

5 INLET TEMPERATURE °C 32 32 32 16
6 MOL. WEIGHT 32.03 32.03 32.03 32.03
7 SP. HEAT RATIO 1.40 1.40 1.40 1.40
8 COMPRESSIBILITY 0.98 0.98 0.98 0.97
9 2 PHASE VAP. MW
10 2 PHASE MIX IN / OUT % by wt
11 CALCULATED Cv 236.97 215.43 30.35 19.01
12 PERCENTAGE OPEN % 70 67 21 13
13 SPL AT 1 METRE dBA <75 <75 81.0 80.0
14 INLET VELOCITY m/s 4.0 3.6 3.6 2.2
15 OUTLET VELOCITY Mach 0.01 0.01 0.02 0.01
17 IN PIPE SIZE / SCH 8 ins / STD ACTUATOR TYPE Pneumatic Cylinder 46
18 OUT PIPE SIZE / SCH 8 ins / STD ACTUATOR MODEL / STROKE P2CN 5 ins 47
PIPE

19 INSULATION - SIZE / SPRING 100 sq.in / STD/IN 48

ACTUATOR
20 DESIGN PRESSURE 40 bar(g) FAIL ACTION Modulating AFC 49
21 DESIGN TMP. MIN/MAX -20°C / 65°C MIN.AIR SUPPLY / SET AT 3 / 3 bar(g) 50
22 VALVE MODEL NO. 5413 ACT. ORIENTATION Vertical 51
23 SIZE / CLASS 8 ins / ASME 600 HANDWHEEL None 52
24 BODY STYLE Globe TRAVEL STOPS None 53
BODY

25 BODY MATERIAL HT Brass EN1982 Gr. CC765S TUBING Metric 316 / 316L SS 54
26 END CONNECTIONS Integral Flange as Body FITTINGS Panam 316 / 316L SS 55
27 END FINISH / PREP. RF(125-250 AARH)3.2-6.3um OPEN / CLOSE / TRIP TIME <5s / <5s / 56
28 BODY F/F DIMS. ANSI/ISA-75.08.01-2016 FL POSITIONER MANF / MODEL See note N4. 57
29 BONNET TYPE Standard SIGNAL ACTION 4mA=close / 20mA=open 58
30 BONNET MATERIAL As Valve Body AIRSET MANF / MODEL See note N6. 59

ACCESSORIES
31 - None 60
BONNET

EXTENSION DIMS. L. SWITCH / P. TRANS TYPE

32 BODY/BONNET NDE 1 See note N1. L. SWITCH / P. TRANS POS'N N/A 61
33 BODY/BONNET NDE 2 N/A BOOSTERS 2 no's, 1/2" NPT,Al MOC (Model: IB43) 62
34 BONNET BOLTING See note N3. PILOT VALVES None 63
35 GASKET MATERIAL Spriral Wound Monel/Graph** AIRLOCK VALVE None 64
36 GLAND PACKING PTFE Chevrons** IP CONV'TR MANF/MODEL None 65
37 SEAT SIZE INS / TYPE 5.25 Cage 1CC SOLENOID MODEL 1/4"Asco 3/2 Br. IP66 Exd 66
38 Cv / CHARACTERISTIC 400 Equal Percent SOLENOID ACTION De-energise = Close 67
39 BALANCING PTFE Seal** AIR RECEIVER None 68
40 FLOW DIRECTION Under TESTING See note N5. 69
TRIM

41 TRIM MATERIAL Monel 400/Colmonoy coating * CE CERTIFICATION N/A 70

MISC
42 SOFT SEAT PTFE** CLEANING Clean for Oxygen Service 71
43 SEAT LEAKAGE ANSI Class VI PAINT FINISH See note N9. 72
44 BELLOWS MATERIAL None PARTS CERTIFICATION See note N10. 73
45 BAFFLES None 74
Notes Revisions
75 N1 DPE-Body/Bnt Castings/Forgings to ASME B16.34 at Foundry/Forge Rev By Date
76 N3 A320Gr B8M CL 2 Bolt/A194Gr 8M SH Nut StSt -325 to 1000degF PO PMP 18-Feb-21
77 N4 SiemensSMART HART Positioner, Model : 6DR5220-0EM00-0AA0, Polycarbonate Enclosure, Exia.
78 N5 Standard material and factory testing with certification.
79 N6 Airset: 1/2" NPT Shavo, Al Encl, 5µ Sint.Bronze Filter, Model: SB20T-4N-M6D/RNMN + SS Gauge
80 N7 ASCO SOV; Model No: NFET,8327B002,24V DC, SS Body, Exd
81 N9 Factory standard paint finish (Body : No Paint ; Actuator : RAL-5017 Blue)
82 N10 3.1 Certs, Body/Bonnet & Bolting
83 Actuator MOC shall be Carbon Steel
84 Pneumatic Connection 1/2" NPT , Electrical Connection 1/2" NPT
85 Oxygen Cleaning & De-greasing requirements shall be as per SGI procedure SGI/OP/111.
86 * Cage MOC shall be LG2 Bronze.
BAM certified soft parts (Gasket - Sigraflex Type E Folie; Gland Packing, Soft Seat & Balance Seal - Dyneon TF 4303) are
87 ** offered.
88 Valve Face to Face dimension as per ANSI/ISA-75.08.01
89 Valve end connection shall be as per ASME B16.5
QMD 7.0.2 rev 2
 SEVERN GLOCON CONTROL VALVE
F96&97, SIPCOT Industrial Park, SIZING DATASHEET
Irungattukkottai, Chennai 602 117, India.
Tel: +91 44 4710 4200 Fax: +91 44 4710 0073 Program Version 7.275SL / EnqRep69
Customer INOX Air Products Private Limited Quotation No CQ 70062
Enquiry Ref. Email SG Order / Item No. DOM/8745/20 3
Order No. 4500224765 Quantity 1
Tag Nos. FV-2020-3
Application FLOW CONTROL ON HP GOX PRODUCT
Project Title AMNS-700 TPD-GOX Control Valve Serial Nos 8745-003-001

Inherent Valve Characteristic

450

400
VALVE INSTALLED Cv

350

300

250

200

150

100

50

0
0 10 20 30 40 50 60 70 80 90 100

% PERCENTAGE LIFT/OPENING
QMD 7.0.2 rev 2