BAT60A...

Silicon Schottky Diode

• High current rectifier Schottky diode with
extreme low VF drop (typ. 0.12V at IF = 10mA)
• For power supply applications
• For clamping and protection in low voltage
applications
• For detection and step-up-conversion
• Pb-free (RoHS compliant) package 1)
• Qualified according AEC Q101

BAT60A

ESD (Electrostatic discharge) sensitive device, observe handling precaution!

Type Package Configuration Marking
BAT60A SOD323 single white/3
Maximum Ratings at TA = 25°C, unless otherwise specified
Parameter Symbol Value Unit
Diode reverse voltage2) VR 10 V
Forward current IF 3 A
Non-repetitive peak surge forward current I FSM 5
(t ≤ 10ms)
Total power dissipation Ptot 1350 mW
TS ≤ 28°C
Junction temperature Tj 150 °C
Operating temperature range T op -55 ... 85
Storage temperature T stg -55 ... 150
1Pb-containing package may be available upon special request
2For TA > 25 °C the derating of VR has to be considered. Please refer to curve Permissible reverse voltage.

1 2007-04-19
 BAT60A...

Thermal Resistance
Parameter Symbol Value Unit
Junction - soldering point 1) RthJS ≤ 90 K/W

Electrical Characteristics at TA = 25°C, unless otherwise specified

Parameter Symbol Values Unit
min. typ. max.
DC Characteristics
Reverse current2) IR mA
VR = 5 V - 0.3 1
VR = 8 V - 0.6 2.6
VR = 5 V, TA = 80 °C - 18 -
Forward voltage2) VF V
IF = 10 mA 0.1 0.12 0.15
IF = 100 mA 0.15 0.2 0.23
IF = 1000 mA 0.22 0.3 0.37

AC Characteristics
Diode capacitance CT - 20 35 pF
VR = 5 V, f = 1 MHz
1For calculation of RthJA please refer to Application Note Thermal Resistance
2Pulsed test: tp = 300 µs; D = 0.01

2 2007-04-19
 BAT60A...

Reverse current IR = ƒ(VR) Forward current IF = ƒ (VF)

TA = Parameter TA = Parameter

10 -1 10 0
A
A

TA=85°C
10 -2
10 -1

10 -3
IR

10 -2

IF
TA=25°C -40°C
25°C
10 -4 85°C
125°C
10 -3

10 -5
TA= -40°C

10 -4
10 -6

10 -7 10 -5
0 2 4 6 8 V 11 0 0.1 0.2 0.3 0.4 0.5 0.6 V 0.8
VR VF

Permissible Reverse voltage VR = ƒ (TA) Forward current IF = ƒ (T S)

tp = Parameter; duty cycle < 0.01
Device mounted on PCB with Rth = 160 K/W

12 3500
V
mA
10

9
2500
tp=300µs
8
VR

IF

7 2000

6
tp=100ms
5 1500

4
1000
3

2
DC 500
1

0 0
0 20 40 60 80 100 120 °C 150 0 15 30 45 60 75 90 105 120 °C 150
TA TS

3 2007-04-19
 BAT60A...

Permissible Puls Load R thJS = ƒ (tp) Permissible Pulse Load

IFmax / I FDC = ƒ (t p)

10 2 10 2

K/W

I Fmax/IFDC
D=0
R thJS

10 1 0.005
0.01
0.02
0.05
10 1 0.1
0.5 0.2
0.2 0.5
0.1
10 0 0.05
0.02
0.01
0.005
D=0

10 -1 -6 -5 -4 -3 -2 -1 1
10 0 -6 -5 -4 -3 -2 0
10 10 10 10 10 10 s 10 10 10 10 10 10 s 10
tp tp

4 2007-04-19
 Package SOD323 BAT60A...

Package Outline
0.9 +0.2
-0.1
+0.2
1.25 -0.1 0 ±0.05
A
2

0.45 ±0.15
2.5 ±0.2
Cathode

1.7 +0.2
-0.1
marking

1
0.3 +0.1
-0.05
+0.05
0.3 -0.2

0.15 +0.1
-0.06
0.25 M A

Foot Print
0.8
1.7
0.8

0.6

Marking Layout (Example)

BAR63-03W
Type code
Cathode marking
Laser marking

Standard Packing
Reel ø180 mm = 3.000 Pieces/Reel
Reel ø330 mm = 10.000 Pieces/Reel

4 0.2
8
2.9
2

Cathode 0.65 1
marking 1.35

5 2007-04-19
 BAT60A...

Edition 2006-02-01
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2007.
All Rights Reserved.

Attention please!

The information given in this dokument shall in no event be regarded as a guarantee

of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any
examples or hints given herein, any typical values stated herein and/or any information
regarding the application of the device, Infineon Technologies hereby disclaims any
and all warranties and liabilities of any kind, including without limitation warranties of
non-infringement of intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices
please contact your nearest Infineon Technologies Office ( www.infineon.com).

Warnings

Due to technical requirements components may contain dangerous substances.

For information on the types in question please contact your nearest
Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or
systems with the express written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause the failure of that
life-support device or system, or to affect the safety or effectiveness of that
device or system.
Life support devices or systems are intended to be implanted in the human body,
or to support and/or maintain and sustain and/or protect human life. If they fail,
it is reasonable to assume that the health of the user or other persons
may be endangered.

6 2007-04-19