San Ace 225AD 9ADTS
San Ace 225AD 9ADTS
San Ace 225AD 9ADTS
ø
225×99 mm
San Ace 225AD 9ADTS type
■ General Specifications
· Material……………………………………… Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
· Expected life………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)
Expected life at 40°C is for reference only.
· Motor protection function………………… Locked rotor burnout protection
For details, please refer to p. 580.
· Dielectric strength………………………… 50/60 Hz, 1500 VAC, for 1 minute (between lead wire conductors and motor case)
· Insulation resistance……………………… 10 MΩ min. at 500 VDC (between lead wire conductors and motor case)
· Sound pressure level (SPL)……………… A-weighted sound pressure level (SPL) at 1 m away from the air inlet.
· Storage temperature……………………… -30 to +70˚C (Non-condensing)
· Lead wire…………………………………… AC power input L: Orange N: Gray Ground Yellow / Green
+10 VDC output Red Black Sensor Yellow Control Brown
· Mass………………………………………… 1800 g
The models listed below have pulse sensors with PWM control function.
Rated voltage Operating voltage range Frequency PWM duty Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life
Model no.
[V] [V] [Hz] cycle* [%] [A] [W] [min-1] [m3/min] [CFM] [Pa] [inchH2O] [dB (A)] [˚C] [h]
100 2.23 155 3200 23.0 812 815 3.27 74
9ADTS11P0G001
20 0.3 10 1000 7.1 252 80 0.32 50
115 90 to 132
100 1.11 70 2450 17.6 621 480 1.93 68
9ADTS11P0F001
20 0.3 10 1000 7.1 252 80 0.32 50 40000/60˚C
50/60 -20 to +60
100 1.17 155 3200 23.0 812 815 3.27 74 (70000/40˚C)
9ADTS23P0G001
20 0.2 10 1000 7.1 252 80 0.32 50
ACDC
600 60%
2.0 115 VAC 50/60 Hz 2000
400 PWM duty cycle
20%
1.0 1000
200