Instrument

Thread &
Weld Fittings
The best partner for value creation
We support the innovations of customers

07
 Instrument Thread & Weld Fittings

Features
•All instrument thread fittings are designed in accordance with ASME B31.3 for instrument and process.
•Male thread are protected with cap.
•Burr-free internal and outside surfaces.
•NPT threads are based on requirement of ASME B1.20.1

Material Standards & Temperature Ratings

Material Bar Stock Forgings Temperature
SS316 ASTM A479, ASTM A276 ASTM A182 -325°F to 1200°F (-198°C to 648°C )
Brass ASTM B16, ASTM B453 ASTM B283 -325 °F to 400°F (-198°C to 204°C )
Carbon steel ASTM A108, JIS G4051 JIS G4051 -20 °F to 350°F (-29°C to 176°C )

Pressure Ratings
316 Stainless Steel Brass Carbon steel
Size NPT
Male Female Male Female Male Female
Designator Size
psig bar psig bar psig bar psig bar psig bar psig bar
1 1/16 11,000 758 6,700 462 5,500 379 3,300 227 11,000 758 6,700 462
2 1/8 10,000 689 6,500 448 5,000 345 3,200 221 10,000 689 6,500 448
4 1/4 8,000 551 6,600 455 4,000 276 3,300 227 8,000 551 6,600 455
6 3/8 7,800 538 5,300 365 3,900 269 2,600 179 7,800 538 5,300 365
8 1/2 7,700 531 4,900 338 3,800 262 2,400 165 7,700 531 4,900 338
12 3/4 7,300 503 4.600 317 3,600 248 2,300 159 7,300 503 4,600 317
16 1 5,300 365 4,400 303 2,600 179 2,200 152 5,300 365 4,400 303
20 1-1/4 6,000 414 5,000 345 3,000 207 2,500 172 6,000 414 5,000 345
24 1-1/2 5,000 345 4,600 317 2,500 172 2,300 159 5,000 344 4,600 317
32 2 3,900 269 3,900 269 1,900 131 1,900 131 3,900 269 3,900 269

•Pressure ratings listed are for temperature up to 37.8C (100 °F).

•Based on Pressure Pipe Code ASME B31.3 pressure rating is calculated with an allowable stress value of 20,000psi, SS316, 10,000psi,
brass 20,000psi, carbon Steel.
•To determine the working pressure in accordance with Power Pipe Code ASME B31.1, multiply psig by 0.94.
Brass pressure ratings remain the same.
•Due to larger outer diameter of female threads rating of female are lower than male threads.
•To determine kPa rating, multiply psig by 6.89.
•Reducing Hex Bushing (P-SHB) pressure rating is not covered in this table. See the pressure rating in the dimensional data chart.

Ordering Information
Pipe Thread Symbol & Designator
S.Steel S.Steel Carbon ISO Thread
Material Brass Pipe
316 316L Steel Designator NPT Tapered Parallel
Size
Identifier S6 S6L CS BS (7/1) (228/1)
1/8 2 2N 2R 2G
1/4 4 4N 4R 4G
•Example : P - SHN - 8N - S6
3/8 6 6N 6R 6G
Pipe fitting Material
1/2 8 8N 8R 8G
Name of fitting Pipe thread Size
3/4 12 12N 12R 12G
1 16 16N 16R 16G

216
 Instrument Thread & Weld Fittings

Close Nipple Hex Coupling Snubber Fittings

(Male NPT both ends) 218 (Female NPT both ends) 221 225
P-SCN P-SHC P-MFAA

Hex Nipple Hex Reducing Coupling

(Male NPT both ends) (Female NPT to reduced female NPT) Vent Protector
218 221 226
P-SHN P-SHRC P-SVP

Hex Reducing Nipple Elbow Union

(Male NPT to reduced male NPT) (Female NPT both ends) (Socket weld Ends)
218 222 227
P-SHRN P-SL P-SWFC

Hex Nipple Street Elbow Union Elbow

(Male NPT to ISO tapered) (Female to male NPT) (Socket weld Ends)
218 222 227
P-SHN P-SSL P-SWLA

Hex Nipple Reducing Street Elbow Union Tee

(Male NPT to male ISO parallel) (Female to male NPT) (Socket weld Ends)
219 222 228
P-SHN P-SRSL P-SWTA

Hex Long Nipple Male Elbow Male Connector

(Male NPT both ends) 219 (Male NPT both ends) 222 228
P-SHLN P-SML P-SSA

Adapter Tee Female Connector

(Male NPT to female NPT) (Female NPT)
219 223 228
P-MFAA P-ST P-SSB

Reducing Adapter Run Tee Male Elbow

(Male NPT to reduced female NPT) (Female to male to Female NPT)
219 223 228
P-MFRA P-SRT P-SMLSW

Adapter Branch Tee Female Elbow

(Male ISO tapered to female NPT) (Female to male to male NPT)
220 223 229
P-MFAA P-SBT P-SFLSW

Adapter Male Tee Pipe Weld to

(Male ISO paralled to female NPT)
220
(Male NPT)
223 Tube Socket Weld 229
P-MFAB P-SMT P-SWRM

Reducing Hex Bushing Union Ball Joint Tube Weld to

(Male NPT to reduced female NPT)
220
(Female NPT both ends)
224 Tube Socket Weld 229
P-SHB P-SUJ P-SWRM

Pipe Cap ISO Parallel Gasket

(Female NPT)
221 224
P-SC SGC

Pipe Plug Fusible Plug

(Male NPT)
221 225
P-SP P-SFP

217
 Instrument Thread & Weld Fittings

Close Nipple Hex Nipple

(Male NPT both ends) (Male NPT both ends)

P-SCN P-SHN

Part Number P A E Part Number P A E H

Pipe Size Pipe Size Hex

P- SCN - 2N 1/8 19.05 4.8 P- SHN - 2N 1/8 25.4 4.8 11.1

P- SCN - 4N 1/4 28.4 7.1 P- SHN - 4N 1/4 35.3 7.1 14.2
P- SCN - 6N 3/8 28.4 9.6 P- SHN - 6N 3/8 36.1 9.6 17.4
P- SCN - 8N 1/2 31.7 11.9 P- SHN - 8N 1/2 46.7 11.9 22.2
P- SCN - 12N 3/4 31.7 15.7 P- SHN - 12N 3/4 46.7 15.7 26.9
P- SCN - 16N 1 47.8 22.4 P- SHN - 16N 1 58.7 22.4 34.9

Hex Reducing Nipple Hex Nipple

(Male NPT to reduced male NPT) (Male NPT to ISO tapered)

P-SHRN P-SHN

P P1 H P P1 H
Part Number Pipe Reduced A E Hex
Part Number NPT BSP/ISO A E Hex
Size Pipe Size Thread Size Thread Size

P- SHRN-4-2N 1/4 1/8 30.7 4.8 14.2 P-SHN-2NR 1/8 1/8-28 7/1 24.6 4.1 11.1
P- SHRN-6-2N 3/8 1/8 32.0 4.8 17.4 P-SHN-4NR 1/4 1/4-19 7/1 35.6 6.4 14.2
P- SHRN - 6 - 4N 3/8 1/4 36.1 7.1 17.4 P-SHN-6NR 3/8 3/8-19 7/1 36.3 9.7 17.4
P- SHRN-8-2N 1/2 1/8 37.2 4.8 22.2 P-SHN-8NR 1/2 1/2-14 7/1 46 11.9 22.2
P- SHRN-8-4N 1/2 1/4 41.7 7.1 22.2 P-SHN-12NR 3/4 3/4-14 7/1 46.7 15.7 26.9
P- SHRN-8-6N 1/2 3/8 41.7 9.6 22.2 P-SHN-16NR 1 1-11 7/1 58.9 22.4 34.9
P- SHRN-12-4N 3/4 1/4 41.7 7.1 26.9
P- SHRN-12-8N 3/4 1/2 46.7 11.9 26.9
P-SHRN -16-4N 1 1/4 49.3 7.1 34.9
P-SHRN-16 -8N 1 1/2 54.1 11.9 34.9

218
 Instrument Thread & Weld Fittings

Hex Nipple Hex Long Nipple

(Male NPT to male parallel) (Male NPT both ends)

P-SHN P-SHLN

P P1 H P H
Part Number NPT BSP / ISO A B C E Hex
Part Number Pipe Size
A E Hex
Thread Size Thread Size

P-SHN-2NG 1/8 1/8-28 228/1 27.4 7.1 13.7 4.1 14.2 P-SHLN-2N 1/8 ★ 4.8 11.1
P-SHN-4NG 1/4 1/4-19 228/1 36.8 11.2 17.8 5.8 19.05 P-SHLN-4N 1/4 ★ 7.1 14.2
P-SHN-6NG 3/8 3/8-19 228/1 37.6 11.2 21.8 7.9 22.2 P-SHLN-6N 3/8 ★ 9.7 17.4
P-SHN-8NG 1/2 1/2-14 228/1 45.0 14.2 26.1 11.9 26.9 P-SHLN-8N 1/2 ★ 11.9 22.2
P-SHN-12NG 3/4 3/4-14 228/1 49.0 15.7 31.5 15.7 33.3 P-SHLN-12N 3/4 ★ 15.7 26.9
P-SHN-16NG 1 1-11 228/1 56.9 18.3 38.9 19.8 41 P-SHLN-16N 1 ★ 22.4 34.9
★: Configure to order

Adapter Reducing Adapter

(Male NPT to female NPT) (Male NPT to reduced female NPT)

P-MFAA P-MFRA

P H P1 P H
Part Number Pipe Size
A E Hex
Part Number Male Female A E Hex
Pipe Size Pipe Size

P-MFAA-2N 1/8 27.4 4.8 14.2 P-MFRA-2-4N 1/8 1/4 31.5 4.8 19.05
P-MFAA-4N 1/4 35.6 7.1 19.05 P-MFRA-2-6N 1/8 3/8 33.5 4.8 22.2
P-MFAA-6N 3/8 37.8 9.6 22.2 P-MFRA-4-6N 1/4 3/8 37.8 7.1 22.2
P-MFAA-8N 1/2 49.0 11.9 26.9 P-MFRA-2-8N 1/8 1/2 40.0 4.8 26.9
P-MFAA-12N 3/4 50.3 15.7 31.7 P-MFRA-4-8N 1/4 1/2 44.5 7.1 26.9
P-MFAA-16N 1 58.0 22.4 41.2 P-MFRA-6-8N 3/8 1/2 44.5 9.6 26.9
P-MFRA-4-12N 1/4 3/4 45.7 7.1 31.8
P-MFRA-6-12N 3/8 3/4 45.7 9.6 31.8
P-MFRA-8-12N 1/2 3/4 51.1 11.9 31.8
P-MFRA-4-16N 1/4 1 50.8 7.1 41.2
P-MFRA-8-16N 1/2 1 54.9 11.9 41.2
P-MFRA-12-16N 3/4 1 55.1 15.7 41.2

219
 Instrument Thread & Weld Fittings

Adapter Adapter
(Male ISO tapered to female NPT) (Male ISO paralled to female NPT)

P-MFAA P-MFAB

P1 P H P1 P H
Part Number BSP / ISO NPT A D E Hex
Part Number BSP / ISO NPT
A B C E Hex
Thread Size Thread Size Thread Size

P-MFAA-2RN 1/8-28 7/1 1/8 27.4 9.7 4.8 14.2 P-MFAB-2GN 1/8-28 228/1 1/8 24.9 7.1 13.7 4.1 14.2
P-MFAA-4RN 1/4-19 7/1 1/4 35.8 14.2 7.1 19.05 P-MFAB-4GN 1/4-19 228/1 1/4 33.3 11.2 17.8 5.8 19.05
P-MFAA-6RN 3/8-19 7/1 3/8 37.6 14.2 9.7 22.2 P-MFAB-6GN 3/8-19 228/1 3/8 37.8 11.2 21.8 7.9 22.2
P-MFAA-8RN 1/2-14 7/1 1/2 49.0 19.1 11.9 26.9 P-MFAB-8GN 1/2-14 228/1 1/2 43.9 14.2 26.1 11.9 26.9
P-MFAA-12RN 3/4-14 7/1 3/4 50.3 19.1 15.7 31.8 P-MFAB-12GN 3/4-14 228/1 3/4 50.8 15.7 31.5 15.7 33.3
P-MFAA-16RN 1-11 7/1 1 58.0 23.9 22.4 41.2 P-MFAB-16GN 1-11 228/1 1 53.1 18.3 38.9 19.8 41.2

Reducing Hex Bushing

(Male NPT to reduced female NPT)

P-SHB

P P1 H Working Pressure (psig)

Part Number Male Female A E
Pipe Size Pipe Size Hex 316SS, CS Brass
P-SHB-4-2N 1/4 1/8 26.7 7.1 14.2 6500 3300
P-SHB-6-2N 3/8 1/8 21.8 8.5 17.4 9200 4700
P-SHB-6-4N 3/8 1/4 30.0 9.6 19.05 6600 3300
P-SHB-8-2N 1/2 1/8 27.4 8.5 22.2 12200 6200
P-SHB-8-4N 1/2 1/4 27.4 11.7 22.2 8300 4400
P-SHB-8-6N 1/2 3/8 35.6 11.9 22.2 5300 2600
P-SHB-12-4N 3/4 1/4 27.4 11.4 26.9 12000 6000
P-SHB-12-6N 3/4 3/8 27.4 15.0 26.9 8200 4300
P-SHB-12-8N 3/4 1/2 41.4 15.7 26.9 4900 2400
P-SHB-16-4N 1 1/4 34.8 11.4 34.9 14500 7400
P-SHB-16-8N 1 1/2 34.8 18.5 34.9 8600 4300
P-SHB-16-12N 1 3/4 34.8 22.4 34.9 5300 2600

220
 Instrument Thread & Weld Fittings

Pipe Cap Pipe Plug

(Female NPT) (Male NPT)

P-SC P-SP

Part Number P A H Part Number P A H

Pipe Size Hex Pipe Size Hex

P-SC-2N 1/8 19.1 14.2 P-SP-2N 1/8 19.05 11.1

P-SC-4N 1/4 22.9 19.05 P-SP-4N 1/4 24.1 14.2
P-SC-6N 3/8 26.2 22.2 P-SP-6N 3/8 25 17.4
P-SC-8N 1/2 34.0 26.9 P-SP-8N 1/2 30.5 22.2
P-SC-12N 3/4 36.6 31.8 P-SP-12N 3/4 30.5 26.9
P-SC-16N 1 41.1 41.2 P-SP -16N 1 38.1 34.9

Hex Coupling Hex Reducing Coupling

(Female NPT both ends) (Female NPT to reduced female NPT)

P-SHC P-SHRC

P H P P1 H
Part Number Pipe Size
A E Wrench Flat
Part Number Pipe Size Reduced A E Hex
Pipe Size

P-SHC-2N 1/8 20.3 8.9 14.2 P-SHRC-4-2N 1/4 1/8 31.2 8.9 19.05
P-SHC-4N 1/4 30.0 11.7 19.05 P-SHRC-6-4N 3/8 1/4 34.8 11.7 22.2
P-SHC-6N 3/8 33.0 15.0 22.2 P-SHRC-8-2N 1/2 1/8 39.4 8.7 26.9
P-SHC-8N 1/2 39.4 18.7 26.9 P-SHRC-8-4N 1/2 1/4 44.2 11.7 26.9
P-SHC-12N 3/4 41.0 23.5 31.8 P-SHRC-8-6N 1/2 3/8 45.0 15.0 26.9
P-SHC-16N 1 50.5 29.7 41.2 P-SHRC-12-4N 3/4 1/4 45.7 11.7 31.8
P-SHRC-12-8N 3/4 1/2 52.0 18.7 31.8
P-SHRC-16-4N 1 1/4 50.8 11.7 41.2
P-SHRC-16-8N 1 1/2 55.4 18.7 41.2
P-SHRC-16-12N 1 3/4 57.0 23.5 41.2

221
 Instrument Thread & Weld Fittings

Elbow Street Elbow

(Female NPT both ends) (Female to male NPT)

P-SL P-SSL

P H P H
Part Number Pipe Size
L E Wrench Flat
Part Number Pipe Size
L S E Wrench
Flat
P-SL-2N 1/8 24.1 8.9 12.7 P-SSL-2N 1/8 24.1 19.6 4.8 12.7
P-SL-4N 1/4 29.0 11.7 17.5 P-SSL-4N 1/4 29.0 26.5 7.1 17.5
P-SL-6N 3/8 34.5 15.0 20.6 P-SSL-6N 3/8 34.5 28.2 9.6 20.6
P-SL-8N 1/2 37.0 18.7 25.4 P-SSL-8N 1/2 37.0 35.3 11.9 25.4
P-SL-12N 3/4 46.5 23.5 31.8 P-SSL-12N 3/4 46.5 39.6 15.7 31.8
P-SL-16N 1 48.8 29.7 42.9 P-SSL-16N 1 48.8 49.2 22.3 42.9

Reducing Street Elbow Male Elbow

(Female to male NPT) (Male NPT both ends)

P-SRSL P-SML

P P1 H P H
Part Number Pipe Male L S E Wrench Part Number Pipe Size
L E Wrench Flat
Size Pipe Size Flat
P-SRSL-4-2N 1/4 1/8 29.0 22.4 4.8 17.5 P- SML-2N 1/8 19.05 4.8 12.7
P-SRSL-6-4N 3/8 1/4 34.5 28.2 7.1 20.6 P-SML-4N 1/4 24.5 7.1 12.7
P-SRSL-8-4N 1/2 1/4 37.0 30.5 7.1 25.4 P-SML-6N 3/8 26.9 9.6 17.5
P-SRSL-8-6N 1/2 3/8 37.0 30.5 9.6 25.4 P-SML-8N 1/2 33.2 11.9 20.6
P-SRSL-12-8N 3/4 1/2 46.5 39.6 11.9 31.8 P-SML-12N 3/4 35.3 15.7 25.4
P-SRSL-16-8N 1 1/2 48.8 44.5 11.9 42.9 P-SML-16N 1 44.5 22.4 31.8

222
 Instrument Thread & Weld Fittings

Tee Run Tee

(Female NPT) (Female to male to Female NPT)

P-ST P-SRT

P H P H
Part Number Pipe Size
L E Wrench Flat
Part Number Pipe Size
L S E Wrench
Flat
P - ST- 2N 1/8 24.1 8.9 12.7 P-SRT-2N 1/8 24.1 19.6 4.8 12.7
P - ST- 4N 1/4 29.0 11.7 17.5 P-SRT-4N 1/4 29.0 26.5 7.1 17.5
P - ST- 6N 3/8 34.5 15.0 20.6 P-SRT-6N 3/8 34.5 28.2 9.6 20.6
P - ST- 8N 1/2 37.0 18.7 25.4 P-SRT-8N 1/2 37.0 35.3 11.9 25.4
P - ST- 12N 3/4 46.5 23.5 31.8 P-SRT-12N 3/4 46.5 39.6 15.7 31.8
P - ST-16N 1 48.8 29.7 42.8 P-SRT-16N 1 48.8 49.2 22.4 42.9

Branch Tee Male Tee

(Female to male to male NPT) (Male NPT)

P-SBT P-SMT

P H P H
Part Number Pipe Size
L S E Wrench Part Number Pipe Size
S E Wrench Flat
Flat
P- SBT - 2N 1/8 24.1 19.6 4.8 12.7 P- SMT- 2N 1/8 19.05 4.8 12.7
P- SBT - 4N 1/4 29.0 26.5 7.1 17.5 P- SMT- 4N 1/4 24.5 7.1 12.7
P- SBT - 6N 3/8 34.5 28.2 9.6 20.6 P- SMT- 6N 3/8 26.9 9.6 17.5
P- SBT - 8N 1/2 37.0 35.3 11.9 25.4 P- SMT- 8N 1/2 33.2 11.9 20.6
P- SBT - 12N 3/4 46.5 39.6 15.7 31.8 P- SMT -12N 3/4 35.3 15.7 25.4
P- SBT - 16N 1 48.8 49.2 22.4 42.9 P- SMT- 16N 1 44.5 22.4 31.8

223
 Instrument Thread & Weld Fittings

Union Ball Joint

(Female NPT both ends) ISO Parallel Gasket
P-SUJ SGC

Part Number P A E H H1 Part Number P E H D

Pipe Size Hex Hex Pipe Size

P- SUJ - F- 2N 1/8 45.7 6.9 28.6 23.8 SGC - 2 1/8 9.9 1.0 15.0
P - SUJ - F- 4N 1/4 59.4 9.1 34.9 30.2 SGC - 4 1/4 13.2 1.5 19.1
P - SUJ - F- 6N 3/8 63.5 13.2 38.1 33.3 SGC - 6 3/8 16.8 1.5 23.1
P- SUJ - F- 8N 1/2 68.6 15.7 44.5 41.3 SGC - 8 1/2 21.1 1.5 26.9
P- SUJ - F-12N 3/4 79.2 22.4 50.8 47.6 SGC - 12 3/4 26.7 2.0 33.0
P - SUJ - F-16N 1 90.4 26.2 63.5 60.3 SGC - 16 1 33.3 2.0 40.1

224
 Instrument Thread & Weld Fittings

Fusible Plug

Features
• Fusible plugs consist of 316 stainless steel body and eutectic alloy with a specific melting point.
• When fusible plug is exposed to a temperature above its melting point, the eutectic alloy melts and the pressure inside the fitting is released
to atmosphere.
• Fusible plugs are used where heat can cause a fire or an explosive chemical reaction.
• Fusible plugs are mainly installed onto compression cylinders, oil, liquified gas and steam boilers.

Ordering Information and Dimension

Basic Ordering NPT Dimensions, mm (inch)

Number Thread Size L E H
P- SFP- 4N 1/4˝ 24.1 (0.95) 6.4 (0.25) 14.2 (9/16)
P- SFP- 6N 3/8˝ 25.0 (0.98) 6.4 (0.25) 17.4 (11/16)
P- SFP- 8N 1/2˝ 30.5 (1.20) 8.7 (0.34) 22.2 (7/8)

P-SFP 4N 160 S6

Fitting Model End Connection Melting Point Body Material

•4N : 1/4˝ NPT •160 : 160°F (71°C) •S6 : SS 316
•6N : 3/8˝ NPT •201 : 201°F (94°C)
•8N : 1/2˝ NPT •255 : 255°F (124°C)
•281 : 281°F (138°C)

Snubber Fitting

Features
• Snubber fittings protect gauges and instruments from system pressure surge and shock.
• Snubber fitting consists of 316 stainless steel or brass body and sintered 316 stainless steel element.
• Pressure damping is accomplished through sintered 316 stainless steel element.

Ordering Information and Dimension

Working Pressure
Basic Ordering NPT Dimensions, mm (inch)
@ 20°C (70°F) bar (psig)
Number Thread Size
L H SS 316 Brass
P-MFAA-4N 1/4˝ 35.6 (1.40) 19.05 (3/4) 303 (4400) 151 (2200)
P-MFAA-8N 3/8˝ 49.0 (1.93) 26.98 (1-1/16) 337 (4900) 165 (2400)

P-MFAA 8N 90 S6

Fitting Model End Connection Pore Size Body Material

•4N : 1/4˝ NPT •05 : 0.5 ~ 2㎛ •15 : 11 ~ 25 ㎛ •S6 : SS 316
•8N : 1/2˝ NPT • 2 : 1 ~ 4㎛ •60 : 50 ~ 75 ㎛ •BS : Brass
• 7 : 5 ~ 10㎛ •90 : 75 ~ 110 ㎛

225
 Instrument Thread & Weld Fittings

Vent Protector

Design Standard

• S-LOK vent protectors, more commonly known as mud dauber fittings, protect open ends of instrument, tubing, outlet vent, and bleed-off lines.
• The mesh wire screen prevents foreign object, such as mud insects, from entering and clogging various systems and causing damage.
• Vent protectors are available in stainless steel and brass.
• Dimensions are for reference only and are subject to change without prior notice.

Material Standards
• Body construction materials : 316 Stainless steel
• Vent Protect (Mesh Size 40) : 316 Stainless steel
• Snap Ring : Stainless steel

Dimensions

Basic Ordering T
E A L H
Number (NPT)
P- SVP- 4N 7.1 1/4 14 19.8 14.28
P- SVP- 6N 10.4 3/8 15 20.6 17.46
P- SVP- 8N 10.4 1/2 19 26.2 22.22

Ordering Information
• Selection the applicable options from designators listed.

P-SVP-4N S6

Basic Ordering Number Body Material

•S6 : 316 Stainless Steel
•BS : Brass

226
 Instrument Thread & Weld Fittings

Instrument Weld Fittings

Features
• S-LOK instrument weld fittings are designed in accordance with ASME B16.11 welding connections.
• All socket weld ports have a tapered shape at the end that hold tubing properly and consistent alignment.
• Pressure ratings for weld fittings are in accordance with ASME B31.3 and safety factor 4:1

Union Union Elbow

P-SWFC P-SWLA

T Working Pressure T H Working Pressure

Part Number d D E A Part Number Tube d D E Wrench L
Tube O.D Psig bar O.D Flat Psig bar
P-SWFC-4T 1/4 4.6 13.0 7.1 19.0 10,000 689 P-SWLA-4T 1/4 4.6 13.4 7.1 12.7 21.8 11,300 778
P-SWFC-6T 3/8 7.1 15.8 7.9 22.4 7,600 523 P-SWLA-6T 3/8 7.1 15.8 7.9 12.7 24.5 8,400 578
P-SWFC-8T 1/2 10.2 19.0 9.7 26.9 6,200 427 P-SWLA-8T 1/2 10.2 20.6 9.7 17.5 29.0 7,800 537
P-SWFC-10T 5/8 12.7 24.0 10.4 30.2 6,400 440 P-SWLA-10T 5/8 12.7 23.8 10.4 20.6 34.5 6,700 461
P-SWFC-12T 3/4 15.7 26.9 11.2 33.3 5,500 378 P-SWLA-12T 3/4 15.7 28.6 11.2 25.4 37.0 6,700 461
P-SWFC-16T 1 22.1 35.0 15.7 36.6 5,200 358 P-SWLA-16T 1 22.1 35.0 15.7 31.8 46.5 6,100 420

227
 Instrument Thread & Weld Fittings

Union Tee Male Connector

P-SWTA P-SSA

T H Working Pressure T P- H Working Pressure

Part Number d D E Wrench L Part Number Tube d D E L
Tube O.D
Flat Psig bar O.D NPT Hex Psig bar
P-SWTA-2T 1/8 2.3 13.4 2.5 12.7 15.0 11,800 813 P-SSA-4T-4N 1/4 1/4 4.6 12.2 7.1 14.2 29.2 7,500 516
P-SWTA-4T 1/4 4.6 13.4 7.1 12.7 21.8 11,300 778 P-SSA-6T-4N 3/8 1/4 7.1 15.3 7.9 15.8 31.8 7,500 516
P-SWTA-6T 3/8 7.1 15.8 7.9 12.7 24.5 8,400 578 P-SSA-6T-6N 3/8 3/8 7.1 15.3 7.9 17.4 31.8 7,300 502
P-SWTA-8T 1/2 10.2 20.6 9.7 17.4 29.0 7,800 537 P-SSA-6T-8N 3/8 1/2 7.1 15.3 7.9 22.2 37.3 7,200 496
P-SWTA-10T 5/8 12.7 23.8 10.4 20.6 34.5 6,700 461 P-SSA-8T-4N 1/2 1/4 7.1 18.5 9.7 19.05 33.3 6,200 427
P-SWTA-12T 3/4 15.7 28.6 11.2 25.4 37.0 6,700 461 P-SSA-8T-6N 1/2 3/8 9.4 18.5 9.7 19.05 33.3 6,200 427
P-SWTA-16T 1 22.1 36.12 15.7 36.12 46.5 6,100 420 P-SSA-8T-8N 1/2 1/2 10.2 18.5 9.7 22.2 38.9 6,200 427

Female Connector Male Elbow

P-SSB P-SMLSW

T P-NPT H Working Pressure T P- H Working Pressure

Part Number Tube Female d D E L Part Number Tube d D E Wrench L S
Psig bar NPT Psig bar
O.D Pipe Hex O.D Flat
Size
P-SSB-2T-2N 1/8 1/8 2.3 7.4 2.5 14.2 21.1 6,100 420 P-SMLSW-4T-4N 1/4 1/4 4.6 15.8 7.1 12.7 20.1 24.5 7,500 516

P-SSB-4T-2N 1/4 1/8 4.6 12.2 7.1 14.2 26.7 6,100 420 P-SMLSW-6T-4N 3/8 1/4 7.1 15.8 7.9 12.7 24.1 24.5 7,500 516

P-SSB-4T-4N 1/4 1/4 4.6 12.2 7.1 19.05 30.0 6,200 427 P-SMLSW-6T-6N 3/8 3/8 7.1 20.6 7.9 17.5 24.6 29.0 7,300 502

P-SSB-6T-4N 3/8 1/4 7.1 15.3 7.9 19.05 31.5 6,200 427 P-SMLSW-6T-8N 3/8 1/2 7.1 23.8 7.9 20.6 25.9 34.5 7,200 496

P-SSB-8T-6N 1/2 3/8 10.2 18.5 9.7 22.2 34.5 5,000 344 P-SMLSW-8T-8N 1/2 1/2 10.2 23.8 9.7 20.6 27.4 34.5 6,200 427
P-SMLSW-12T-12N 3/4 3/4 15.7 28.6 11.2 25.4 37.0 37.0 6,700 461
P-SSB-8T-8N 1/2 1/2 10.2 18.5 9.7 26.9 40.4 4,600 316
P-SSB-10T-8N 5/8 1/2 12.7 23.4 10.4 26.9 41.9 4,600 316
P-SSB-12T-12N 3/4 3/4 15.7 26.7 11.2 33.3 43.9 4,300 296

228
 Instrument Thread & Weld Fittings

Female Elbow Pipe Weld to Tube Socket Weld

P-SFLSW P-SWRM

37.5°

T P-NPT H Working Pressure P

T
Tube Working Pressure
Part Number Tube Female d D E Wrench L L1 Part Number d D E L
O.D Pipe Flat Psig bar Pipe Size Socket Psig bar
Size Size
P-SFLSW-4T-4N 1/4 1/4 4.6 12.2 7.1 17.5 22.9 29.7 6,200 427 P-SWRM-4P-4N 1/4 1/8 4.6 13.7 7.1 22.4 9,600 661
P-SFLSW-6T-4N 3/8 1/4 7.1 15.3 7.9 17.5 25.1 29.7 7,000 482 P-SWRM-6P-6N 3/8 3/8 7.1 15.3 7.9 26.2 7,600 523
P-SFLSW-6T-8N 3/8 1/2 7.1 15.3 7.9 25.4 28.7 37.0 5,400 372 P-SWRM-6P-8N 3/8 1/2 10.2 18.5 9.7 27.9 6,200 427
P-SFLSW-8T-8N 1/2 1/2 10.2 18.5 9.7 25.4 30.2 38.0 5,400 372 P-SWRM-8P-4N 1/2 1/4 4.6 12.2 7.1 28.4 7,300 502
P-SWRM-8P-6N 1/2 3/8 7.1 15.3 7.9 28.4 7,300 502
P-SWRM-8P-8N 1/2 1/2 10.2 18.5 9.7 30.2 6,200 427
P-SWRM-12P-6N 3/4 3/8 7.1 15.3 7.9 38.1 6,200 427
P-SWRM-12P-8N 3/4 1/2 10.2 18.5 9.7 38.1 6,200 427

Tube Weld to Tube Socket Weld

P-SWRM

T T1 Working Pressure
Part Number Tube d D E L
Tube O.D Socket Size Psig bar
P-SWRM-4T-2T 1/4 1/8 2.3 7.4 2.5 14.2 11,800 813
P-SWRM-6T-4T 3/8 1/4 4.6 12.2 7.1 19.1 7,700 530
P-SWRM-8T-4T 1/2 1/4 4.6 18.2 7.1 22.4 7,000 482
P-SWRM-8T-6T 1/2 3/8 8.1 15.7 7.9 22.4 7,000 482
P-SWRM-12T-8T 3/4 1/2 10.2 18.5 9.7 28.4 5,900 406
P-SWRM-16T-8T 1 1/2 10.2 18.5 9.7 35.1 5,600 344

229
 Instrument Thread & Weld Fittings

230