Forged

Fittings
The best partner for value creation
We support the innovations of customers
 Forged Fittings

90°Elbow Boss Type R

244 251
SWLA SWBR
45°Elbow 90°Elbow
244 252
SWLB SLA
Tee 45°Elbow
245 252
SWTA SLB
Cross Tee
245 253
SWXA STA
Full Coupling Cross
246 253
SWFC SXA
Half Coupling Full Coupling
246 254
SWHC SFC
Cap Half Coupling
247 254
SWCA SHC
Boss Cap
247 254
SWBA SCA
Union Hex Head Pulg
248 255
SWUA SPB
Union Squre Pulg
248 255
SWUAO SPD
Male Connector Round Plug
249 255
SWMC-R SPE
Male Connector Reducing Coupling
249 255
SWMC-G SRC
Reducing Insert Hex Nipple
250 256
SWRM SNA
Reducing Coupling Reducing Nipple
251 256
SWRC SNR

240
 Forged Fittings

Hex Socket
256
SSA
Hex Bushing
257
SHB
Boss
257
SBR
Union
258
SUA
Union
258
SUAO
Weldolet
259
SWLT
Sockolet
260
SCLT
Threadolet
260
STLT

Swage Nipple 261

241
 Forged Fittings

SOCKET WELDING & THREADED FITTINGS

1. Pressure Ratings
These fittings shall be disignated as pressure class 2000, 3000 And 6000 fittings for threading and pressure class
3000,6000 and 9000 for socket-welding. This designation identifies the fittings with their ratings as shown as follow, Table 1.

Table 1:Correlation of Fittings Class With Schedule Number of Wall Designation of Pipe for Calculation of Ratings.

Pipe Used for Rating Basic

Pressure Class
Type of Fitting
Designation of Fitting
Schedule No. Wall Designation

2000 lb Threaded 80 X-S

3000 lb Threaded 160 -

6000 lb Threaded - XX-S

3000 lb Socket-Welding 80 X-S

6000 lb Socket-Welding 160 -

9000 lb Socket-Welding - XX-S

This table is not intended to restrict the use of pipe of thinner or thicker wall with fittings.
Pipe actually used may be thinner or thicker in nominal wall than that shown in Table 1.
When tinner pipe is used its strength may govern the rating.
When thicker pipe is used (e.g., for mechanical strength) the strength of the fitting governs the rating.

Table 2 : Nominal wall thickness of Schedule 160 and Double Extra Strong Pipe.

Schedule 160 XX-S

NPS.
in mm in mm

1/8 0.124 3.15 0.190 4.83

1/4 0.145 3.68 0.230 6.05

3/8 0.158 4.01 0.252 6.40

242
 Forged Fittings

Table 3 : Pressure/ Temperature Patings Non-shock Working Pressure in Pounds per Square Incd

3000lb Socket Welding 6000lb Socket Welding

2000lb Threaded Fittings
Service and Threaded Fittings and Threaded Fittings
Temperature
Degree°F Carbon Carbon Carbon
F304 F316 F22 F5 F304 F316 F22 F5 F304 F316 F22 F5
steel steel steel

100 2000 1715 2000 2000 2000 3000 2570 3000 3000 3000 6000 5145 6000 6000 6000

150 1970 1615 1970 1970 1970 2950 2425 2950 2950 2950 5915 4855 5915 5915 5915

200 1940 1520 1940 1940 1940 2915 2280 2915 2915 2915 5830 4565 5830 5830 5830

250 1915 1445 1915 1915 1915 2875 2170 2975 2975 2975 5750 4340 5750 5750 5750

300 1975 1370 1896 1895 1895 2845 2055 2845 2845 2845 5690 4115 5690 5690 5690

350 1875 1310 1875 1875 1875 2810 1965 2810 2810 2810 5625 3930 5690 5625 5625

400 1850 1245 1850 1850 1850 2775 1870 2775 2775 2775 5550 3745 5550 5550 5550

450 1810 1195 1810 1710 1810 2715 1790 2715 2715 2715 5430 3585 5430 5430 5430

500 1735 1140 1735 1635 1735 2605 1715 2605 2605 2605 5210 3430 5210 5210 5210

550 1640 1100 1640 1540 1640 2460 1650 2460 2460 2460 4925 3305 4925 4925 4925

600 1540 1060 1540 1440 1540 2310 1590 2310 2310 2310 4620 3180 4620 4620 4620

650 1430 1020 1430 1330 1430 2150 1535 2150 2150 2150 4300 3070 4300 4300 4300

700 1305 985 1370 1240 1340 1960 1480 2055 2010 2010 3920 2960 4110 4025 4025

750 1180 950 1305 1145 1245 1775 1425 1960 1870 1870 3550 2850 3920 3745 3745

800 1015 915 1240 1055 1155 1525 1370 1865 1735 1735 3050 2745 3730 3470 3470

850 830 880 1180 1060 1060 1250 1330 1770 1595 1595 2500 2660 3540 3190 3190

900 615 860 1115 970 970 925 1290 1675 1455 1455 1885 2580 3350 2915 2915

950 425 845 1055 880 880 640 1270 1580 1320 1320 1295 2540 3165 2640 2640

1000 235 830 990 740 695 350 1250 1485 1115 1240 715 2500 2975 2230 2085

2. Size Identification

The size of a fitting is identified by the nominal pipe size.

For reducing fittings, the size of the largest run opening is to be given first, followed by the size of the opening
opposite of the same run. The branch size of a Tee is given last.
Where the case is a Cross, the largest side-outlet is thirdly given, then the opening opposite.

1 ¾ 1 ¾

¼ 1½
Tee Cross
1x¾x¼ 1½ x ½x1 x ¾
3. Threads
-Unless otherwise specified in inquiry, all threaded fittings are supplied with NPT threads (ANSI B2.1 American
Standard Taper Pipe Thread) for reference, other available threads are:
-ISO/R7, Pipe Threads for Gas List Tubes and Screwed Fittings where Pressure-tight Joints are made on the
threads (BS 2.1 & JIS B0203PT Thread).
-API 5B, Line Pipe Threads.
-KSB0222 Taper Pipe Threads

243
 Forged Fittings

90°Elbow 45°Elbow

SWLA SWLB

Unit Unit
Part No. Size M B D A C Weight Part No. Size M B D A C Weight
(kg) (kg)

3000 lb 3000 lb
SWLA80-02 ¼ 23 9.4 11.1 10 0.132 SWLB80-02 ¼ 23 9.4 7.9 10 0.093
SWLA80-03 ⅜ 26.5 12.7 13.4 10 0.113 SWLB80-03 ⅜ 26.5 12.7 7.9 10 0.142
To be specified by purchaser

To be specified by purchaser
SWLA80-04 ½ 34.0 16.1 16.0 13 0.226 SWLB80-04 ½ 34.0 16.1 13.0 13 0.264
SWLA80-06 ¾ 38.5 21.2 20.0 16 0.312 SWLB80-06 ¾ 38.5 21.2 13.0 14 0.397
See Note (1)

See Note (1)

SWLA80-08 1 46.5 27.0 23.0 16 0.596 SWLB80-08 1 46.5 27.0 14.0 16 0.624
SWLA80-10 1¼ 56.5 35.4 28.0 18 0.709 SWLB80-10 1¼ 56.5 35.4 18.0 18 0.907
SWLA80-12 1½ 63.5 41.2 33.0 20 0.850 SWLB80-12 1½ 63.5 41.2 22.0 20 0.782
SWLA80-16 2 76.0 52.7 40.0 22 1.474 SWLB80-16 2 76.0 52.7 24.0 22 1.265
SWLA80-20 2½ 92.0 62.7 42.0 24 2.460 SWLB80-20 2½ 92.0 62.7 29.0 24 3.062
SWLA80-24 3 110.0 78.0 57.1 31.5 4.650 SWLB80-24 3 110.0 78.0 34.0 31.5 4.763
SWLA80-32 4 146.0 102.0 70.0 45 9.410 SWLB80-32 4 146.0 102.0 42.0 45 8.250
6000 lb 6000 lb
SWLA160-04 ½ 38.5 12.0 20.0 16 0.425 SWLB160-04 ½ 38.5 12.0 13 16 0.397
SWLA160-06 ¾ 46.5 15.8 23.0 16 0.652 SWLB160-06 ¾ 46.5 15.8 14 16 0.595
SWLA160-08 1 56.5 21.0 28.0 18 1.020 SWLB160-08 1 56.5 21.0 22 18 0.935
See Note (1)

See Note (1)

SWLA160-10 1¼ 63.5 29.7 33.0 20 1.446 SWLB160-10 1¼ 63.5 29.7 22 20 1.157

SWLA160-12 1½ 76.0 34.2 40.0 22 2.380 SWLB160-12 1½ 76.0 34.2 24 22 1.982
SWLA160-16 2 92.0 43.1 42.0 24 3.760 SWLB160-16 2 92.0 43.1 29 24 4.000
SWLA160-20 2½ 110.0 54.0 57.1 24 6.120 SWLB160-20 2½ 110.0 54.0 34 24 5.875
SWLA160-24 3 121.0 67.7 66.0 31.5 8.760 SWLB160-24 3 121.0 67.7 34 31.5 6.509
SWLA160-32 4 152.0 87.0 70.0 45 14.300 SWLB160-32 4 152.0 87.0 42 45 12.360
9000 lb 9000 lb
SWLAXXS-04 ½ 46.5 6.4 23.0 16 0.510 SWLBXXS-04 ½ 46.5 6.4 14 16 0.875
SWLAXXS-06 ¾ 56.5 11.0 28.0 16 0.782 SWLBXXS-06 ¾ 56.5 11.0 22 16 1.369
SWLAXXS-08 1 63.5 15.2 33.0 18 1.224 SWLBXXS-08 1 63.5 15.2 22 18 1.725
See Note (1)

See Note (1)

SWLAXXS-10 1¼ 76.0 22.7 40.0 20 1.807 SWLBXXS-10 1¼ 76.0 22.7 24 20 2.931

SWLAXXS-12 1½ 92.0 27.9 42.0 22 2.975 SWLBXXS-12 1½ 92.0 27.9 29 22 5.062
SWLAXXS-16 2 110.0 38.1 54.0 24 4.700 SWLBXXS-16 2 110.0 38.1 34 24 6.400
SWLAXXS-20 2½ 121.0 45.0 66.0 24 10.512 SWLBXXS-20 2½ 121.0 45.0 34 24 7.925
SWLAXXS-24 3 146.0 58.4 70.0 31.5 13.020 SWLBXXS-24 3 146.0 58.4 42 31.5 11.569
(1) For the 'Bore'(M) other them standard pipe outside diameter.
-Dimensions are in millimeters.
-Dimensional Tolerances See ANSI B16.11 or JIS B2316

244
 Forged Fittings

Tee Cross

SWTA SWXA

Unit Unit
Part No. Size M B D A C Weight Part No. Size M B D A C Weight
(kg) (kg)
3000 lb 3000 lb
SWTA80-02 ¼ 23 9.4 11.1 10 0.161 SWXA80-02 ¼ 23 9.4 9.4 10 0.182
SWTA80-03 ⅜ 26.5 12.7 13.4 10 0.142 SWXA80-03 ⅜ 26.5 12.7 12.7 10 0.170
To be specified by purchaser

To be specified by purchaser
SWTA80-04 ½ 34.0 16.1 16.0 13 0.170 SWXA80-04 ½ 34.0 16.1 16.1 13 0.368
SWTA80-06 ¾ 38.5 21.2 20.0 16 0.397 SWXA80-06 ¾ 38.5 21.2 21.2 16 0.519
See Note (1)

See Note (1)

SWTA80-08 1 46.5 27.0 23.0 16 0.624 SWXA80-08 1 46.5 27.0 27.0 16 0.680
SWTA80-10 1¼ 56.5 35.4 28.0 18 0.907 SWXA80-10 1¼ 56.5 35.4 35.4 18 1.020
SWTA80-12 1½ 63.5 41.2 33.0 20 1.134 SWXA80-12 1½ 63.5 41.2 41.2 20 1.389
SWTA80-16 2 76.0 52.7 40.0 22 1.701 SWXA80-16 2 76.0 52.7 52.7 22 2.326
SWTA80-20 2½ 92.0 62.7 42.0 24 3.424 SWXA80-20 2½ 92.0 62.7 62.7 24 7.484
SWTA80-24 3 110.0 78.0 57.1 31.5 5.670 SWXA80-24 3 110.0 78.0 78.0 31.5 10.432
SWTA80-32 4 146.0 102.0 70.0 45 12.247 SWXA80-32 4 146.0 102.0 102.0 45 18.144
6000 lb 6000 lb
SWTA160-04 ½ 38.5 12.0 20.0 16 0.623 SWXA160-04 ½ 38.5 12.0 20.0 16 0.660
SWTA160-06 ¾ 46.5 15.8 23.0 16 0.907 SWXA160-06 ¾ 46.5 15.8 23.0 16 1.120
SWTA160-08 1 56.5 21.0 28.0 18 1.503 SWXA160-08 1 56.5 21.0 28.0 18 1.730
See Note (1)

See Note (1)

SWTA160-10 1¼ 63.5 29.7 33.0 20 1.701 SWXA160-10 1¼ 63.5 29.7 33.0 20 2.381
SWTA160-12 1½ 76.0 34.2 40.0 22 2.948 SWXA160-12 1½ 76.0 34.2 40.0 22 3.750
SWTA160-16 2 92.0 43.1 42.0 24 3.702 SWXA160-16 2 92.0 43.1 42.0 24 7.860
SWTA160-20 2½ 110.0 54.0 57.1 24 8.723 SWXA160-20 2½ 110.0 54.0 57.1 24 10.600
SWTA160-24 3 121.0 67.7 66.0 31.5 10.660 SWXA160-24 3 121.0 67.7 66.0 31.5 13.600
SWTA160-32 4 152.0 87.0 70.0 45 19.020 SWXA160-32 4 152.0 87.0 70.0 45 26.000
9000 lb 9000 lb
SWTAXXS-04 ½ 46.5 6.4 23.0 16 0.779 SWXAXXS-04 ½ 46.5 6.4 23.0 16 1.615
SWTAXXS-06 ¾ 56.5 11.0 28.0 16 1.333 SWXAXXS-06 ¾ 56.5 11.0 28.0 16 2.113
SWTAXXS-08 1 63.5 15.2 33.0 18 1.879 SWXAXXS-08 1 63.5 15.2 33.0 18 3.896
See Note (1)

See Note (1)

SWTAXXS-10 1¼ 76.0 22.7 40.0 20 2.126 SWXAXXS-10 1¼ 76.0 22.7 40.0 20 6.298
SWTAXXS-12 1½ 92.0 27.9 42.0 22 3.685 SWXAXXS-12 1½ 92.0 27.9 42.0 22 9.280
SWTAXXS-16 2 110.0 38.1 54.0 24 4.627 SWXAXXS-16 2 110.0 38.1 54.0 24 18.741
SWTAXXS-20 2½ 121.0 45.0 66.0 24 10.903 SWXAXXS-20 2½ 121.0 45.0 66.0 24 25.702
SWTAXXS-24 3 146.0 58.4 70.0 31.5 13.325 SWXAXXS-24 3 146.0 58.4 70.0 31.5 33.761
(1) For the 'Bore'(M) other them standard pipe outside diameter.
-Dimensions are in millimeters.
-Dimensional Tolerances See ANSI B16.11 or JIS B2316

245
 Forged Fittings

Full Coupllong Half Coupling

SWFC SWHC

Unit Unit
Part No. Size M B D C E Weight Part No. Size M B D C E Weight
(kg) (kg)
3000 lb 3000 lb
SWFC80-02 ¼ 22.0 9.4 10 6.4 0.05 SWHC80-02 ¼ 22.0 9.4 10 15.7 0.058
SWFC80-03 ⅜ 26.0 12.7 10 6.4 0.12
To be specified by purchaser

SWHC80-03 ⅜ 26.0 12.7 10 17.5 0.073

SWFC80-04 ½ 32.0 16.1 10 9.6 0.12

To be specified by purchaser
SWHC80-04 ½ 32.0 16.1 10 22.4 0.138
SWFC80-06 ¾ 38.0 21.2 13 9.6 0.18
SWHC80-06
See Note (1)

¾ 38.0 21.2 13 23.9 0.203

SWFC80-08 1 46.0 27.0 13 12.7 0.26

See Note (1)

SWHC80-08 1 46.0 27.0 13 28.4 0.313
SWFC80-10 1¼ 55.0 35.4 13 12.7 0.35
SWFC80-12 1½ 63.0 41.2 13 12.7 0.47 SWHC80-10 1¼ 55.0 35.4 13 30.2 0.431
SWFC80-16 2 75.0 52.7 16 19.1 0.81 SWHC80-12 1½ 63.0 41.2 13 31.8 0.593
SWFC80-20 2½ 95.0 65.3 16 19.1 1.25 SWHC80-16 2 75.0 52.7 16 41.1 1.280
SWFC80-24 3 110.0 78.0 16 19.1 1.53 SWHC80-20 2½ 95.0 62.7 16 42.9 1.490
SWFC80-32 4 140.0 102.0 19 19.1 2.91 SWHC80-24 3 110.0 78.0 16 44.5 2.202
6000 lb SWHC80-32 4 140.0 102.0 19 47.7 4.250
SWFC160-04 ½ 35.0 12.0 10 9.6 0.170 6000 lb
SWFC160-06 ¾ 42.0 15.8 13 9.6 0.249 SWHC160-04 ½ 35.0 12.0 10 22.4 0.193
SWFC160-08 1 50.0 21.0 13 12.7 0.420
SWHC160-06 ¾ 42.0 15.8 13 23.9 0.284
See Note (1)

SWFC160-10 1¼ 60.0 29.7 13 12.7 0.525

SWHC160-08 1 50.0 21.0 13 28.4 0.488
SWFC160-12 1½ 68.0 34.2 13 12.7 0.665
See Note (1)

SWHC160-10 1¼ 60.0 29.7 13 30.2 0.583

SWFC160-16 2 85.0 43.1 16 19.1 1.240
SWHC160-12 1½ 68.0 34.2 13 31.8 0.640
SWFC160-20 2½ 100.0 54.0 16 19.1 1.640
SWFC160-24 3 114.3 67.7 16 19.1 2.746 SWHC160-16 2 85.0 43.1 16 41.1 1.726
SWFC160-32 4 160.0 87.0 19 19.1 4.679 SWHC160-20 2½ 100.0 54.0 16 42.9 2.247
9000 lb SWHC160-24 3 114.3 67.7 16 44.5 3.412
SWFCXXS-04 ½ 42.0 6.4 10 9.6 0.270 SWHC160-32 4 160.0 87.0 19 47.7 5.730
SWFCXXS-06 ¾ 48.0 11.0 13 9.6 0.327 9000 lb
SWFCXXS-08 1 60.0 15.2 13 12.7 0.518 SWHCXXS-04 ½ 46.5 6.4 14 16 0.875
See Note (1)

SWFCXXS-10 1¼ 70.0 22.7 13 12.7 0.813 SWHCXXS-06 ¾ 56.5 11.0 22 16 1.369

SWFCXXS-12 1½ 75.0 27.9 13 12.7 0.940 SWHCXXS-08 1 63.5 15.2 22 18 1.725
SWFCXXS-16 2 90.0 38.1 16 19.1 1.553
See Note (1)

SWHCXXS-10 1¼ 76.0 22.7 24 20 2.931

SWFCXXS-20 2½ 110.0 45.0 16 19.1 2.430
SWHCXXS-12 1½ 92.0 27.9 29 22 5.062
SWFCXXS-24 3 130.0 58.4 16 19.1 3.721
SWHCXXS-16 2 110.0 38.1 34 24 6.400
SWFCXXS-32 4 160.0 80.3 19 19.1 5.137
SWHCXXS-20 2½ 121.0 45.0 34 24 7.925
-Note
(1) For the 'Bore'(M) other them standard pipe outside diameter. SWHCXXS-24 3 146.0 58.4 42 31.5 11.569
-Dimensions are in millimeters. SWHCXXS-32 4 160.0 160.0 19 47.7 7.610
-Dimensional Tolerances See ANSI B16.11 or JIS B2316

246
 Forged Fittings

Caps Boss

SWCA SWBA

Unit Unit
Part No. Size M B C L Weight Part No. Size M B D C L Weight
(kg) (kg)
3000 lb 3000 lb
SWCA80-02 ¼ 22.0 10 20 0.048 SWBA80-02 ¼ 22.0 9.4 10 30.0 0.09

To be specified by purchaser
SWCA80-03 ⅜ 26.0 10 20 0.076 SWBA80-03 ⅜ 26.0 12.7 10 30.0 0.14
To be specified by purchaser

SWCA80-04 ½ 32.0 10 20 0.100 SWBA80-04 ½ 32.0 16.1 10 33.0 0.24

See Note (1)

SWCA80-06 ¾ 38.0 13 25 0.182 SWBA80-06 ¾ 38.0 21.2 13 35.0 0.28
See Note (1)

SWCA80-08 1 46.0 13 27 0.241 SWBA80-08 1 46.0 27.0 13 43.0 0.41

SWCA80-10 1¼ 55.0 13 30 0.350 SWBA80-10 1¼ 55.0 35.4 13 46.0 0.44
SWCA80-12 1½ 63.0 13 30 0.612 SWBA80-12 1½ 63.0 41.2 13 50.0 0.63
SWCA80-16 2 75.0 16 36 0.880 SWBA80-16 2 75.0 52.7 16 57.0 1.09
SWCA80-20 2½ 95.0 16 42 1.520 6000 lb
SWCA80-24 3 110.0 16 46 2.208 SWBA160-04 ½ 35.0 12.0 10 33 0.45
SWCA80-32 4 140.0 19 55 4.417 SWBA160-06 ¾ 42.0 15.8 13 35 0.52
See Note (1)

6000 lb SWBA160-08 1 50.0 21.0 13 43 0.73

SWCA160-04 ½ 35.0 10 26 0.055 SWBA160-10 1¼ 60.0 29.7 13 46 0.77
SWCA160-06 ¾ 42.0 13 27 0.223 SWBA160-12 1½ 68.0 34.2 13 50 0.12
SWCA160-08 1 50.0 13 30 0.382 SWBA160-16 2 85.0 43.1 16 57 1.82
See Note (1)

SWCA160-10 1¼ 60.0 13 35 0.511

SWCA160-12 1½ 68.0 13 36 0.735
SWCA160-16 2 85.0 16 39 1.289
SWCA160-20 2½ 100.0 16 45 2.056
SWCA160-24 3 114.3 16 52 3.364
9000 lb
SWCAXXS-04 ½ 42.0 10 30 0.262
SWCAXXS-06 ¾ 48.0 13 30 0.320
SWCAXXS-08 1 60.0 13 33 0.520
See Note (1)

SWCAXXS-10 1¼ 70.0 13 40 1.256

SWCAXXS-12 1½ 75.0 13 40 1.440
-Note
SWCAXXS-16 2 90.0 16 43 1.686 (1) For the 'Bore'(M) other them standard pipe outside diameter.
SWCAXXS-20 2½ 110.0 16 50 2.986 -Dimensions are in millimeters.
-Dimensional Tolerances See ANSI B16.11 or JIS B2316
SWCAXXS-24 3 130.0 16 58 4.666

247
 Forged Fittings

R.J Union
Unit
SWUA Part No. Size M B l1 l2 L C D H Weight
(kg)
3000 lb
SWUA80-02 ¼ 21.0 11.5 18 41 10.0 9.4 35HEX 0.187
SWUA80-03 ⅜ 25.0 14.0 18 46 10.0 12.7 40HEX 0.245

To be specified by purchaser
SWUA80-04 ½ 32.0 15.0 21 51 10.0 16.1 46HEX 0.430
SWUA80-06 ¾ 40.0 17.0 23 57 13.0 21.2 58HEX 0.620

See Note (1)

SWUA80-08 1 48.0 19.5 25 64 13.0 27.0 65HEX 1.030
SWUA80-10 1¼ 55.0 22.5 27 72 13.0 35.4 76OCT 1.150
SWUA80-12 1½ 63.5 24.0 30 78 13.0 41.2 83OCT 1.530
SWUA80-16 2 76.0 26.0 36 88 16.0 52.7 103OCT 3.050
SWUA80-20 2½ 95.0 34.0 42 110 18.0 62.7 124OCT 5.140
SWUA80-24 3 116.0 37.5 45 120 22.5 78.0 142OCT 7.120
SWUA80-32 4 148.0 45.0 50 140 25.0 102.0 176OCT 12.400
6000 lb
SWUA160-04 ½ 40.0 17.0 23 57 13 12.0 56HEX 0.62
SWUA160-06 ¾ 44.5 19.5 25 64 13 15.8 65HEX 0.94
SWUA160-08 1 51.0 22.5 27 72 13 21.0 74OCT 1.98
See Note (1)

SWUA160-10 1¼ 57.2 24.0 30 78 16 29.7 83OCT 1.41

SWUA160-12 1½ 71.5 26.0 36 88 16 34.2 103OCT 2.75
SWUA160-16 2 90.0 34.0 42 110 16 43.1 124OCT 5.05
SWUA160-20 2½ 105.0 35.0 45 120 18 54.0 150OCT 6.87
SWUA160-24 3 125.0 45.0 50 140 22 67.7 176OCT 10.85

O-Ring Union

SWUAO Part No. Size M B1 B2 D C l1 l2 L N H O-Ring

Unit
Weight
(kg)

3000 lb

SWUAO80-02 ½ 22 24 10 10 10 18 38 21 35HEX P18 0.160

To be specified by purchaser

SWUAO80-03 ¾ 27 30 12 10 10 18 38 26 41HEX P20 0.228

SWUAO80-04 1 32 35 16 10 12 20 44 32 46HEX G25 0.328

See Note (1)

SWUAO80-06 1¼ 38 42 20 13 12 26 50 38 54HEX G30 0.535

SWUAO80-08 1½ 47 52 25 13 15 26 56 46 63HEX G35 0.786

SWUAO80-10 2 56 60 32 13 15 30 60 54 77HEX G45 1.104

SWUAO80-12 2½ 63 68 38 13 18 36 72 63 80OCT G50 1.542

SWUAO80-16 3 76 82 48 17 18 36 72 77 95OCT G65 2.080

(1) For the 'Bore'(M) other them standard pipe outside diameter.
-Dimensions are in millimeters.
-Dimensional Tolerances See ANSI B16.11 or JIS B2316

248
 Forged Fittings

Male Connector
T O-
Part No. Size D l d A L H H1
SWMC-R (PT) Ring
SWMC02-02R ¼ 14.3 10 7 22 54 HEX 36 HEX 30 ¼ P18

SWMC02-03R ¼ 14.3 10 9 22 55 HEX 36 HEX 30 ⅜ P18

SWMC03-03R ⅜ 17.8 10 9 27 56 HEX 41 HEX 36 ⅜ P20

SWMC03-04R ⅜ 17.8 10 12 27 56 HEX 41 HEX 36 ½ P20

SWMC04-04R ½ 22.2 10 12 32 60 HEX 46 HEX 41 ½ G25

SWMC04-06R ½ 22.2 10 16 32 66 HEX 46 HEX 41 ¾ G25

SWMC06-06R ¾ 27.7 13 16 37 72 HEX 55 HEX 46 ¾ G30

SWMC06-08R ¾ 27.7 13 20 37 75 HEX 55 HEX 46 1 G30

SWMC08-08R 1 34.5 13 20 44 82 HEX 60 HEX 55 1 G35

SWMC08-10R 1 34.5 13 25 44 84 HEX 60 HEX 55 1¼ G35

SWMC10-10R 1¼ 43.2 13 25 54 90 OCT 75 OCT 65 1¼ G45

SWMC10-12R 1¼ 43.2 13 32 54 91 OCT 75 OCT 65 1½ G45

SWMC12-12R 1½ 49.1 13 32 63 99 OCT 85 OCT 75 1½ G50

SWMC12-16R 1½ 49.1 13 38 63 103 OCT 85 OCT 75 2 G50

SWMC16-16R 2 61.1 16 38 76 103 OCT 100 OCT 90 2 G65

Male Connector T O-
Part No. Size D l d A L H H1
(PT) Ring
SWMC-G
SWMC02-02G ¼ 14.3 10 7 22 54 HEX 36 HEX 30 ¼ P18

SWMC02-03G ¼ 14.3 10 9 22 55 HEX 36 HEX 30 ⅜ P18

SWMC03-03G ⅜ 17.8 10 9 27 56 HEX 41 HEX 36 ⅜ P20

SWMC03-04G ⅜ 17.8 10 12 27 56 HEX 41 HEX 36 ½ P20

SWMC04-04G ½ 22.2 10 12 32 60 HEX 46 HEX 41 ½ G25

SWMC04-06G ½ 22.2 10 16 32 66 HEX 46 HEX 41 ¾ G25

SWMC06-06G ¾ 27.7 13 16 37 72 HEX 55 HEX 46 ¾ G30

SWMC06-08G ¾ 27.7 13 20 37 75 HEX 55 HEX 46 1 G30

SWMC08-08G 1 34.5 13 20 44 82 HEX 60 HEX 55 1 G35

SWMC08-10G 1 34.5 13 25 44 84 HEX 60 HEX 55 1¼ G35

SWMC10-10G 1¼ 43.2 13 25 54 90 OCT 75 OCT 65 1¼ G45

SWMC10-12G 1¼ 43.2 13 32 54 91 OCT 75 OCT 65 1½ G45

SWMC12-12G 1½ 49.1 13 32 63 99 OCT 85 OCT 75 1½ G50

SWMC12-16G 1½ 49.1 13 38 63 103 OCT 85 OCT 75 2 G50

SWMC16-16G 2 61.1 16 38 76 103 OCT 100 OCT 90 2 G65

249
 Forged Fittings

Reducing Insert
Unit
SWRM Part No. Size Type M B B1 C(Min.) E L D Weight
(kg)
3000 lb
SWRM0302-S80 ⅜ ¼ 1 22.2 9.6 21 16 9.4 0.051
SWRM0402-S80 ½ ¼ 2 - 9.6 15 - 9.4 0.052
SWRM0403-S80 ½ ⅜ 1 25.4 9.6 24 20 12.7 0.086
SWRM0602-S80 ¾ ¼ 3 - 9.6 19 7 9.4 0.109
SWRM0603-S80 ¾ ⅜ 2 - 9.6 19 - 12.7 0.697
SWRM0604-S80 ¾ ½ 1 31.8 9.6 26 22 16.1 0.146
SWRM0803-S80 1 ¾ 3 25.4 9.6 22 7 12.7 0.161
SWRM0804-S80 1 ½ 2 - 9.6 22 - 16.1 0.183
SWRM0806-S80 1 ¾ 1 38.1 12.7 29 23 21.4 0.208

To be specified by purchaser

To be specified by purchaser
SWRM1004-S80 1¼ 1 3 31.8 9.6 24 7 16.1 0.273
SWRM1006-S80 1¼ ¾ 2 - 12.7 24 - 21.4 0.286

See Note (1)

See Note (1)

SWRM1008-S80 1¼ 1 1 46.0 12.7 32 24.5 27.2 0.436
SWRM1206-S80 1½ ¾ 3 38.1 12.7 26 8 21.4 0.348
SWRM1208-S80 1½ 1 2 - 12.7 26 - 27.2 0.384
SWRM1210-S80 1½ 1¼ 1 55.0 12.7 35 27 35.5 0.463
SWRM1208-S80 2 1½ 3 46.0 12.7 29 8 27.2 0.615
SWRM1610-S80 2 1¼ 2 - 12.7 29 - 35.5 0.647
SWRM1612-S80 2 1½ 1 65.0 12.7 37 29 41.2 0.661
SWRM2010-S80 2½ 2 3 55.0 12.7 35 8 35.5 1.183
SWRM2012-S80 2½ 1½ 3 65.0 12.7 35 8 41.2 1.107
SWRM2016-S80 2½ 2 1 76.0 15.9 39 30 52.7 1.200
SWRM2412-S80 3 1½ 3 65.0 12.7 39 8 41.2 1.715
SWRM2416-S80 3 2 3 75.0 15.9 39 10 52.7 1.542
SWRM2420-S80 3 2½ 1 95.0 15.9 51 33.5 65.9 1.825
6000 lb
SWRM0302-S160 ¾ ½ 1 38.1 12.3 23 12.3 12.3 0.316
SWRM0402-S160 1 ½ 1 38.1 12.3 24 12.3 12.3 0.354
SWRM0403-S160 1 ¾ 1 46.0 16.2 26 16.2 16.2 0.526
SWRM0602-S160 1¼ ½ 2 - 12.3 - 12.3 12.3 0.415
SWRM0603-S160 1¼ ¾ 1 46.0 16.2 28 16.2 16.2 0.557
SWRM0604-S160 1¼ 1 1 55.0 21.2 28 21.2 21.2 0.765
SWRM0803-S160 1½ ¾ 2 - 16.2 - 16.2 16.2 0.619
SWRM0804-S160 1½ 1 1 55.0 21.2 28 21.2 21.2 0.723
See Note (1)

See Note (1)

SWRM0806-S160 1½ 1¼ 1 62.0 29.9 32 29.9 29.9 0.957

SWRM1004-S160 2 1 3 - 21.2 8 21.2 21.2 1.026
SWRM1006-S160 2 1¼ 1 62.0 29.9 34 29.9 29.9 1.137
SWRM1008-S160 2 1½ 1 75.0 34.4 34 34.4 34.4 0.911
SWRM1206-S160 2½ 1¼ 3 62.0 29.9 8 29.9 29.9 1.478
SWRM1208-S160 2½ 1½ 2 - 34.4 - 34.4 34.4 1.881
SWRM1210-S160 2½ 2 1 95.0 43.1 36 43.1 43.1 2.918
Application of Reducing Insert SWRM1208-S160 3 1½ 3 75.0 34.4 8 34.4 34.4 2.370
SWRM1610-S160 3 2 2 95.0 43.1 - 43.1 43.1 3.313
SWRM1612-S160 3 2½ 1 110.0 57.3 38 57.3 57.3 3.562
(1) For the 'Bore'(M) other them standard pipe outside diameter.
-Dimensions are in millimeters. -Dimensional Tolerances See ANSI B16.11 or JIS B2316

250
 Forged Fittings

Reducing Coupling
Part No. Size D D1 l l1 d A E L
SWRC
3000 lb
SWRC0302-S80 ⅜ ¼ 17.8 14.3 10 10 9.4 26 6.4 26.4
SWRC0402-S80 ½ ¼ 22.2 14.3 10 10 9.4 32 9.5 29.5
SWRC0403-S80 ½ ⅜ 22.2 17.8 10 10 12.7 32 9.5 29.5
SWRC0602-S80 ¾ ¼ 27.7 14.3 13 10 9.4 38 9.5 32.5
SWRC0603-S80 ¾ ⅜ 27.7 17.8 13 10 12.7 38 9.5 32.5
SWRC0604-S80 ¾ ½ 27.7 22.2 13 10 16.1 38 9.5 32.5
SWRC0803-S80 1 ⅜ 34.5 17.8 13 10 12.7 46 12.7 35.7
SWRC0804-S80 1 ½ 34.5 22.2 13 10 16.1 46 12.7 35.7
SWRC0806-S80 1 ¾ 34.5 27.2 13 13 21.4 46 12.7 38.7
SWRC1004-S80 1¼ ½ 43.2 22.2 13 10 16.1 55 12.7 35.7
SWRC1006-S80 1¼ ¾ 43.2 27.7 13 13 21.4 55 12.7 38.7
SWRC1008-S80 1¼ 1 43.2 34.5 13 13 27.2 55 12.7 38.7
SWRC1206-S80 1½ ¾ 49.1 27.7 13 13 21.4 63 12.7 38.7
SWRC1208-S80 1½ 1 49.1 34.5 13 13 27.2 63 12.7 38.7
SWRC1210-S80 1½ 1¼ 49.1 43.2 13 13 35.5 63 12.7 38.7
SWRC1608-S80 2 1 61.1 34.5 16 13 27.2 75 19.1 48.1
SWRC1610-S80 2 1¼ 61.1 43.2 16 13 35.5 75 19.1 48.1
SWRC1612-S80 2 1½ 61.1 49.1 16 13 41.2 75 19.1 48.1
6000 lb
SWRC0604-S160 ¾ 27.7 22.2 13 13 12.3 42 9.5 35.5
SWRC0804-S160 1 34.5 22.2 13 13 12.3 50 12.7 38.7
SWRC0806-S160 1 34.5 27.7 13 13 16.2 50 12.7 38.7
SWRC1004-S160 1¼ 43.2 22.2 13 13 12.3 60 12.7 38.7
SWRC1006-S160 1¼ 43.2 27.7 13 13 16.2 60 12.7 38.7
SWRC1008-S160 1¼ 43.2 34.5 13 13 21.2 60 12.7 38.7
SWRC1206-S160 1½ 49.1 27.7 16 13 16.2 68 12.7 41.7
SWRC1208-S160 1½ 49.1 34.5 16 13 21.2 68 12.7 41.7
SWRC1210-S160 1½ 49.1 43.2 16 13 29.9 68 12.7 41.7
SWRC1608-S160 2 61.1 34.5 16 13 21.2 85 19.1 48.1
SWRC1610-S160 2 61.1 43.2 16 13 29.9 85 19.1 48.1
SWRC1612-S160 2 61.1 49.1 16 16 34.4 85 19.1 51.1

Boss Type R
Part No. Size D l d A R L
SWBR 3000 lb
SWBR02-S80 ¼ 14.3 10 9.4 22 25 30
SWBR03-S80 ⅜ 17.8 10 12.7 26 25 30
SWBR04-S80 ½ 22.2 10 16.1 32 30 33
SWBR06-S80 ¾ 27.7 13 21.4 38 30 35
SWBR08-S80 1 34.5 13 27.2 46 40 43
SWBR10-S80 1¼ 43.2 13 35.5 55 45 46
SWBR12-S80 1½ 49.1 13 41.2 63 55 50
SWBR16-S80 2 61.1 16 52.7 75 60 57
6000 lb
SWBR04-S160 ½ 22.2 13 12.3 35 30 33
SWBR06-S160 ¾ 27.7 13 16.2 42 30 35
SWBR08-S160 1 34.5 13 21.2 55 40 43
SWBR10-S160 ¾ 43.2 13 29.9 60 45 46
SWBR12-S160 1 49.1 16 34.4 70 55 50
SWBR16-S160 1¼ 61.1 16 43.1 85 60 57

251
 Forged Fittings

90°Elbow 45°Elbow

SLA SLB

Unit Unit
Part No. Size T B A Weight Part No. Size T B A Weight
(kg) (kg)
2000 lb 2000 lb
SLA40-02 ¼ 23 25.4 0.13 SLB40-02 ¼ 23 19.1 0.16
SLA40-03 ⅜ 26.5 25.4 0.12 SLB40-03 ⅜ 26.5 19.1 0.13
SLA40-04 ½ 34.0 28.5 0.23 SLB40-04 ½ 34.0 26.0 0.25
SLA40-06 ¾ 38.5 33.5 0.36 SLB40-06 ¾ 38.5 28.6 0.32
SLA40-08 1 46.5 38.1 0.55 SLB40-08 1 46.5 30.0 0.43
SLA40-10 1¼ 56.5 44.5 0.95 SLB40-10 1¼ 56.5 33.3 0.75
SLA40-12 1½ 63.5 50.8 1.12 SLB40-12 1½ 63.5 42.0 1.06
SLA40-16 2 76.0 60.5 1.96 SLB40-16 2 76.0 46.0 1.49
SLA40-20 2½ 92.0 76.0 3.25 SLB40-20 2½ 92.0 53.0 2.45
SLA40-24 3 110.0 86.0 5.64 SLB40-24 3 110.0 64.0 4.00
SLA40-26 3½ 121.0 95.5 6.92 SLB40-26 3½ 121.0 64.0 5.12
SLA40-32 4 146.0 106.5 10.43 SLB40-32 4 146.0 80.0 8.68
3000 lb 3000 lb
SLA80-02 ¼ 26.5 25.4 0.120 SLB80-02 ¼ 26.5 19.1 0.16
SLA80-03 ⅜ 34.0 28.5 0.235 SLB80-03 ⅜ 34.0 26.0 0.28
SLA80-04 ½ 38.5 33.5 0.390 SLB80-04 ½ 38.5 28.6 0.38
SLA80-06 ¾ 46.5 38.1 0.570 SLB80-06 ¾ 46.5 30.0 0.51
SLA80-08 1 56.5 44.5 0.990 SLB80-08 1 56.5 33.3 1.03
SLA80-10 1¼ 63.5 50.8 1.260 SLB80-10 1¼ 63.5 42.0 1.22
SLA80-12 1½ 76.0 60.5 2.125 SLB80-12 1½ 76.0 46.0 2.36
SLA80-16 2 84.0 64.0 3.520 SLB80-16 2 84.0 53.0 3.66
SLA80-20 2½ 110.0 83.0 5.460 SLB80-20 2½ 110.0 64.0 6.12
SLA80-24 3 121.0 95.5 8.000 SLB80-24 3 121.0 64.0 6.12
SLA80-26 3½ 146.0 106.5 11.230 SLB80-26 3½ 146.0 80.0 8.40
SLA80-32 4 152.0 114.3 13.500 SLB80-32 4 152.0 80.0 11.30
6000 lb 6000 lb
SLA160-03 ⅜ 38.5 33.5 0.40 SLB160-03 ⅜ 38.5 28.6 0.45
SLA160-04 ½ 46.5 38.5 0.68 SLB160-04 ½ 46.5 30.0 0.72
SLA160-06 ¾ 56.5 44.5 1.13 SLB160-06 ¾ 56.5 33.3 1.00
SLA160-08 1 63.5 50.8 1.59 SLB160-08 1 63.5 42.0 1.56
SLA160-10 1¼ 76.0 60.5 2.60 SLB160-10 1¼ 76.0 46.0 2.29
SLA160-12 1½ 84.0 64.0 4.32 SLB160-12 1½ 84.0 53.0 3.80
SLA160-16 2 110.0 85.0 7.33 SLB160-16 2 110.0 64.0 5.76
SLA160-20 2½ 121.0 95.5 9.25 SLB160-20 2½ 121.0 64.0 7.20
SLA160-24 3 146.0 106.5 12.05 SLB160-24 3 146.0 80.0 11.30
SLA160-26 3½ 152.0 114.3 14.30 SLB160-26 3½ 152.0 80.0 13.20
SLA160-32 4 152.0 114.3 14.10 SLB160-32 4 152.0 80.0 11.80

252
 Forged Fittings

90°Elbow Cross

STA SXA

Unit Unit
Part No. Size T B A Weight Part No. Size T B A Weight
(kg) (kg)
2000 lb 2000 lb
STA40-02 ¼ 23 25.4 0.14 SXA40-02 ¼ 23 25.4 0.14
STA40-03 ⅜ 26.5 25.4 0.18 SXA40-03 ⅜ 26.5 25.4 0.22
STA40-04 ½ 34.0 28.5 0.26 SXA40-04 ½ 34.0 28.5 0.37
STA40-06 ¾ 38.5 33.5 0.43 SXA40-06 ¾ 38.5 33.5 0.52
STA40-08 1 46.5 38.1 0.65 SXA40-08 1 46.5 38.1 0.79
STA40-10 1¼ 56.5 44.5 0.91 SXA40-10 1¼ 56.5 44.5 1.28
STA40-12 1½ 63.5 50.8 1.25 SXA40-12 1½ 63.5 50.8 1.62
STA40-16 2 76.0 60.5 2.10 SXA40-16 2 76.0 60.5 2.62
STA40-20 2½ 92.0 76.0 3.94 SXA40-20 2½ 92.0 76.0 4.66
STA40-24 3 110.0 86.0 5.98 SXA40-24 3 110.0 86.0 7.10
STA40-26 3½ 121.0 95.5 7.41 SXA40-26 3½ 121.0 95.5 8.85
STA40-32 4 146.0 106.5 12.36 SXA40-32 4 146.0 106.5 14.83
3000 lb 3000 lb
STA80-02 ¼ 26.5 25.4 0.18 SXA80-02 ¼ 26.5 25.4 0.23
STA80-03 ⅜ 34.0 28.5 0.32 SXA80-03 ⅜ 34.0 28.5 0.40
STA80-04 ½ 38.5 33.5 0.52 SXA80-04 ½ 38.5 33.5 0.63
STA80-06 ¾ 46.5 38.1 0.73 SXA80-06 ¾ 46.5 38.1 0.93
STA80-08 1 56.5 44.5 1.26 SXA80-08 1 56.5 44.5 1.47
STA80-10 1¼ 63.5 50.8 1.65 SXA80-10 1¼ 63.5 50.8 1.78
STA80-12 1½ 76.0 60.5 2.81 SXA80-12 1½ 76.0 60.5 3.42
STA80-16 2 84.0 64.0 4.35 SXA80-16 2 84.0 64.0 5.50
STA80-20 2½ 110.0 83.0 6.26 SXA80-20 2½ 110.0 83.0 7.66
STA80-24 3 121.0 95.5 10.05 SXA80-24 3 121.0 95.5 11.21
STA80-26 3½ 146.0 106.5 14.62 SXA80-26 3½ 146.0 106.5 16.72
STA80-32 4 152.0 114.3 16.50 SXA80-32 4 152.0 114.3 19.00
6000 lb 6000 lb
STA160-03 ⅜ 38.5 33.5 0.59 SXA160-03 ⅜ 38.5 33.5 0.67
STA160-04 ½ 46.5 38.5 0.96 SXA160-04 ½ 46.5 38.5 1.12
STA160-06 ¾ 56.5 44.5 1.50 SXA160-06 ¾ 56.5 44.5 1.90
STA160-08 1 63.5 50.8 2.10 SXA160-08 1 63.5 50.8 2.90
STA160-10 1¼ 76.0 60.5 3.30 SXA160-10 1¼ 76.0 60.5 4.20
STA160-12 1½ 84.0 64.0 5.72 SXA160-12 1½ 84.0 64.0 6.65
STA160-16 2 110.0 85.0 9.64 SXA160-16 2 110.0 85.0 10.00
STA160-20 2½ 121.0 95.5 13.40 SXA160-20 2½ 121.0 95.5 16.00
STA160-24 3 146.0 106.5 16.15 SXA160-24 3 146.0 106.5 19.87
STA160-26 3½ 152.0 114.3 18.23 SXA160-26 3½ 152.0 114.3 28.10
STA160-32 4 152.0 114.3 16.70 SXA160-32 4 152.0 114.3 24.60

253
 Forged Fittings

Full Coupling Half Coupling CAP

SFC SHC SCA

Unit Unit Unit

Size Size Size
Part No. B L Weight Part No. B L Weight Part No. B L Weight
T T T
(kg) (kg) (kg)
3000 lb 3000 lb 3000 lb
SFC80-02 ¼ 22.0 35.1 0.050 SHC80-02 ¼ 22.0 17.5 0.025 SCA80-02 ¼ 22.0 25 0.05
SFC80-03 ⅜ 25.0 38.1 0.061 SHC80-03 ⅜ 25.0 19.0 0.030 SCA80-03 ⅜ 25.0 25 0.08

SFC80-04 ½ 30.0 48.0 0.142 SHC80-04 ½ 30.0 24.0 0.070 SCA80-04 ½ 30.0 32 0.12

SFC80-06 ¾ 35.0 51.0 0.218 SHC80-06 ¾ 35.0 25.5 0.100 SCA80-06 ¾ 35.0 37 0.20

SFC80-08 1 45.0 61.0 0.418 SHC80-08 1 45.0 30.5 0.210 SCA80-08 1 45.0 41 0.31

SFC80-10 1¼ 57.0 67.0 0.720 SHC80-10 1¼ 57.0 33.5 0.365 SCA80-10 1¼ 57.0 44 0.60

SFC80-12 1½ 63.5 80.0 1.065 SHC80-12 1½ 63.5 40.0 0.520 SCA80-12 1½ 63.5 44 0.73

SFC80-16 2 76.0 86.0 1.400 SHC80-16 2 76.0 43.0 0.690 SCA80-16 2 76.0 48 1.05

SFC80-20 2½ 92.0 92.0 2.550 SHC80-20 2½ 92.0 46.0 1.250 SCA80-20 2½ 92.0 60 2.27

SFC80-24 3 108.0 108.0 3.830 SHC80-24 3 108.0 54.0 1.840 SCA80-24 3 108.0 65 3.83

SFC80-26 3½ 127.0 114.3 5.720 SHC80-26 3½ 127.0 57.5 2.860 SCA80-26 3½ 127.0 68 4.52

SFC80-32 4 140.0 121.0 6.350 SHC80-32 4 140.0 60.5 3.510 SCA80-32 4 140.0 68 6.35

6000 lb 6000 lb 6000 lb

SFC160-02 ¼ 25.0 35.0 0.120 SHC160-02 ¼ 25.0 17.5 0.06 SCA160-02 ¼ 25.0 27 0.09
SFC160-03 ⅜ 32.0 38.0 0.180 SHC160-03 ⅜ 32.0 19.0 0.09 SCA160-03 ⅜ 32.0 27 0.14
SFC160-04 ½ 38.1 48.0 0.280 SHC160-04 ½ 38.1 24.0 0.14 SCA160-04 ½ 38.1 33 0.25
SFC160-06 ¾ 45.0 51.0 0.450 SHC160-06 ¾ 45.0 25.5 0.23 SCA160-06 ¾ 45.0 38 0.36
SFC160-08 1 57.0 61.0 0.800 SHC160-08 1 57.0 30.5 0.37 SCA160-08 1 57.0 43 0.70
SFC160-10 1¼ 63.5 67.0 1.400 SHC160-10 1¼ 63.5 33.5 0.70 SCA160-10 1¼ 63.5 46 0.80
SFC160-12 1½ 76.0 80.0 1.950 SHC160-12 1½ 76.0 40.0 0.90 SCA160-12 1½ 76.0 48 1.28
SFC160-16 2 92.0 86.0 2.800 SHC160-16 2 92.0 43.0 1.22 SCA160-16 2 92.0 51 2.16
SFC160-20 2½ 108.0 92.0 3.800 SHC160-20 2½ 108.0 46.0 1.85 SCA160-20 2½ 108.0 64 2.72
SFC160-24 3 127.0 108.0 6.010 SHC160-24 3 127.0 54.0 2.95 SCA160-24 3 127.0 68 4.95
SFC160-26 3½ 140.0 114.3 8.250 SHC160-26 3½ 140.0 57.5 4.12 SCA160-26 3½ 140.0 70 6.84
SFC160-32 4 160.0 121.0 10.700 SHC160-32 4 160.0 60.5 5.40 SCA160-32 4 160.0 75 9.21

254
 Forged Fittings

Hex Head Pulg Squre Pulg Round Plug

SPB SPD SPE

Unit Unit Unit

Part Size Part Size Size
No. T
l1 l2 H Weight
No. T
l1 l2 H Weight Part No.
T
B L Weight
(kg) (kg) (kg)

3000 lb 3000 lb 3000 lb

SPB-01 ⅛ 11 6.3 11.0 0.03 SPD-01 ⅛ 9.9 6.6 7.0 0.007 SPE-01 ⅛ 10.3 35.0 0.057
SPB-02 ¼ 13 6.3 14.0 0.03 SPD-02 ¼ 13.0 6.6 9.0 0.014 SPE-02 ¼ 13.5 41.3 0.057
SPB-03 ⅜ 14 8.0 19.0 0.06 SPD-03 ⅜ 13.0 7.9 12.0 0.028 SPE-03 ⅜ 17.5 41.3 0.085
SPB-04 ½ 18 8.0 22.0 0.08 SPD-04 ½ 15.0 9.9 14.0 0.057 SPE-04 ½ 21.4 44.5 0.170
SPB-06 ¾ 19 10.0 27.0 0.14 SPD-06 ¾ 16.0 11.0 17.0 0.085 SPE-06 ¾ 27.0 44.5 0.170
SPB-08 1 21 10.0 35.0 0.22 SPD-08 1 20.1 13.0 19.0 0.140 SPE-08 1 33.4 50.8 0.340
SPB-10 1¼ 22 14.0 46.0 0.51 SPD-10 1¼ 21.1 15.0 24.0 0.255 SPE-10 1¼ 42.9 50.8 0.340
SPB-12 1½ 24 16.0 50.0 0.62 SPD-12 1½ 21.1 16.0 27.0 0.397 SPE-12 1½ 48.4 50.8 0.710
SPB-16 2 25 18.0 63.5 1.02 SPD-16 2 23.1 18.0 32.0 0.680 SPE-16 2 60.3 63.5 1.361
SPB-20 2½ 32 19.0 76.2 1.76 SPD-20 2½ 27.0 20.0 38.1 1.020 SPE-20 2½ 73.0 70.0 2.155
SPB-24 3 40 21.0 99.0 2.66 SPD-24 3 29.0 21.0 42.9 1.301 SPE-24 3 88.9 70.0 3.456
SPB-26 3½ 41 22.0 103.0 3.72 SPD-26 3½ 30.0 22.2 47.6 2.050 SPE-26 3½ 101.6 76.2 4.216
SPB-32 4 42 32.0 117.0 5.90 SPD-32 4 32.0 25.0 63.5 3.257 SPE-32 4 114.3 76.2 5.838

Reducing Coupling

SRC Part No.

T
(PT)
T1
(PT)
A L

SRC02-01R ¼ ⅛ 22 35.1
SRC03-02R ⅜ ¼ 25 38.1
SRC04-02R ½ ¼ 30 47.8
SRC04-03R ½ ⅜ 30 47.8
SRC06-02R ¾ ¼ 35 50.8
SRC06-03R ¾ ⅜ 35 50.8
SRC06-04R ¾ ½ 35 50.8
SRC08-03R 1 ⅜ 45 60.5
SRC08-04R 1 ½ 45 60.5
SRC08-06R 1 ¾ 45 60.5
SRC10-04R 1¼ ½ 60 66.5
SRC10-06R 1¼ ¾ 60 66.5
SRC10-08R 1¼ 1 60 66.5
SRC12-06R 1½ ¾ 65 79.3
SRC12-08R 1½ 1 65 79.3
SRC12-10R 1½ 1¼ 65 79.3
SRC16-08R 2 1 80 85.9
SRC16-10R 4 1¼ 80 85.9

255
 Forged Fittings

Hex Nipple
T
SNA Part No.
(PT)
d H l l1

SNA-01R ⅛ 4 HEX 12 10 6
SNA-02R ¼ 7 HEX 17 14 8
SNA-03R ⅜ 9 HEX 19 15 8
SNA-04R ½ 12 HEX 22 19 9
SNA-06R ¾ 16 HEX 27 21 10
SNA-08R 1 20 HEX 36 24 11
SNA-10R 1¼ 28 HEX 46 27 12
SNA-12R 1½ 32 HEX 50 27 14
SNA-16R 2 40 HEX 65 31 16

Reducing Nipple
T T1
SNR Part No.
(PT)
x
(PT)
d H l l1 l2

SNR02-01R ¼ x ⅛ 4 HEX 17 14 8 10
SNR03-02R ⅜ x ¼ 7 HEX 19 15 8 14
SNR04-02R ½ x ¼ 7 HEX 22 19 9 14
SNR04-03R ½ x ⅜ 9 HEX 22 19 9 15
SNR06-02R ¾ x ¼ 7 HEX 27 21 10 14
SNR06-03R ¾ x ⅜ 9 HEX 27 21 10 15
SNR06-04R ¾ x ½ 12 HEX 27 21 10 19
SNR08-03R 1 x ⅜ 9 HEX 36 24 11 15
SNR08-04R 1 x ½ 12 HEX 36 24 11 19
SNR08-06R 1 x ¾ 16 HEX 36 24 11 21
SNR10-04R 1¼ x ½ 12 HEX 46 27 12 19
SNR10-06R 1¼ x ¾ 16 HEX 46 27 12 21
SNR10-08R 1¼ x 1 20 HEX 46 27 12 24
SNR12-06R 1½ x ¾ 16 HEX 50 27 14 21
SNR12-08R 1½ x 1 20 HEX 50 27 14 24
SNR12-10R 1½ x 1¼ 28 HEX 50 27 14 27
SNR16-08R 2 x 1 20 HEX 65 31 16 24
SNR16-10R 2 x 1¼ 28 HEX 65 31 16 27
SNR16-12R 2 x 1½ 32 HEX 65 31 16 27

Reducing Nipple
T
SSA Part No.
(PT)
H L

SSA-01R ⅛ HEX 19 30
SSA-02R ¼ HEX 22 30
SSA-03R ⅜ HEX 24 30
SSA-04R ½ HEX 32 40
SSA-06R ¾ HEX 36 42
SSA-08R 1 HEX 46 50
SSA-10R 1¼ HEX 55 55
SSA-12R 1½ HEX 65 55
SSA-16R 2 HEX 75 64

256
 Forged Fittings

Hex Bushing
T T1
SHB Part No.
(PT)
x
(PT)
H l l1

SHB02-01R ¼ x ⅛ HEX 17 14 8
SHB03-02R ⅜ x ¼ HEX 19 15 8
SHB04-02R ½ x ¼ HEX 24 19 9
SHB04-03R ½ x ⅜ HEX 24 19 9
SHB06-02R ¾ x ¼ HEX 30 21 10
SHB06-03R ¾ x ⅜ HEX 30 21 10
SHB06-04R ¾ x ½ HEX 30 21 10
SHB08-02R 1 x ⅜ HEX 36 24 11
SHB08-03R 1 x ½ HEX 36 24 11
SHB08-04R 1 x ¾ HEX 36 24 11
SHB08-06R 1 x ½ HEX 36 24 11
SHB10-04R 1¼ x ¾ HEX 46 27 12
SHB10-06R 1¼ x 1 HEX 46 27 12
SHB10-08R 1¼ x ¾ HEX 46 27 12
SHB12-04R 1½ x 1 HEX 50 27 14
SHB12-06R 1½ x 1¼ HEX 50 27 14
SHB12-08R 1½ x 1 HEX 50 27 14
SHB12-10R 1½ x 1¼ HEX 50 27 14
SHB16-06R 2 x ¾ HEX 65 31 16
SHB16-08R 2 x 1 HEX 65 31 16
SHB16-10R 2 x 1¼ HEX 65 31 16
SHB16-12R 2 x 1½ HEX 65 31 16

Boss Type A
T
SBA Part No.
(PT)
A L

SBA-02R ¼ 22 30
SBA-03R ⅜ 26 30
SBA-04R ½ 32 33
SBA-06R ¾ 38 35
SBA-08R 1 46 43
SBA-10R 1¼ 55 46
SBA-12R 1½ 65 50
SBA-16R 2 75 57

Boss Type R

SBR Part No.

T
A L R
(PT)

SBA-02R ¼ 22 30 25
SBA-03R ⅜ 26 30 25
SBA-04R ½ 32 33 30
SBA-06R ¾ 38 35 30
SBA-08R 1 46 43 40
SBA-10R 1¼ 55 46 45
SBA-12R 1½ 65 50 55
SBA-16R 2 75 57 60

257
 Forged Fittings

R.J Union Unit

Part No. Size B l1 l2 L H
SUA Weight
(kg)
3000 lb
SUA80-02 ¼ 21.0 11.5 18 41 HEX 35 0.19
SUA80-03 ⅜ 25.0 14.0 18 46 HEX 40 0.25
SUA80-04 ½ 32.0 15.0 21 51 HEX 46 0.43
SUA80-06 ¾ 40.0 17.0 23 57 HEX 58 0.62
SUA80-08 1 48.0 19.5 25 64 HEX 65 1.03
SUA80-10 1¼ 55.5 22.5 27 72 OCT 76 1.15
SUA80-12 2 63.5 24.0 30 78 OCT 83 1.54
SUA80-16 2 76.0 26.0 36 88 OCT 103 3.05
SUA80-20 2½ 95.0 34.0 42 110 OCT 124 5.14
SUA80-24 3 116.0 37.0 45 120 OCT 150 7.12
SUA80-32 4 148.0 45.0 50 140 OCT 180 12.40
6000 lb
SUA160-02 ¼ 25.4 13.5 19 46 HEX 40 0.25
SUA160-03 ⅜ 32.0 15.0 21 51 HEX 46 0.43
SUA160-04 ½ 40.0 17.0 23 57 HEX 56 0.62
SUA160-06 ¾ 44.5 19.5 25 64 HEX 65 0.94
SUA160-08 1 51.0 22.5 27 72 OCT 74 1.08
SUA160-10 1¼ 57.2 24.0 30 78 OCT 83 1.41
SUA160-12 1½ 71.5 26.0 36 88 OCT 103 2.75
SUA160-16 2 90.0 34.0 42 110 OCT 124 5.05
SUA160-20 2½ 105.0 37.5 45 120 OCT 150 6.87
SUA160-24 3 125.0 45.0 50 140 OCT 180 10.85

O-Ring Union
Unit
SUAO Part No. Size B l l1 L N H O-Ring Weight
(kg)
3000 lb
SUAO80-02 ¼ 22 10 18 38 21 HEX 35 P18 0.160
SUAO80-03 ⅜ 27 10 18 38 26 HEX 41 P20 0.215
SUAO80-04 ½ 32 12 20 44 32 HEX 46 G25 0.312
SUAO80-06 ¾ 38 12 26 50 38 HEX 54 G30 0.477
SUAO80-08 1 47 15 26 56 46 HEX 63 G35 0.764
SUAO80-10 1¼ 56 15 30 60 54 HEX 77 G45 1.106
SUAO80-12 1½ 63 18 36 72 63 OCT 80 G50 1.327
SUAO80-16 2 76 18 36 72 77 OCT 95 G65 1.856

258
 Forged Fittings

Weldolet

SWLT

STD, X-S

A B C APPʼWeight(kg)
Outlet Size
STD X-S STD X-S STD X-S STD X-S

½ 19.1 19.1 34.9 34.9 23.8 23.8 0.08 0.09

¾ 22.2 22.2 44.5 44.5 30.2 30.2 0.11 0.14
1 27.0 27.0 54.0 54.0 36.5 36.5 0.23 0.21
1¼ 31.8 31.8 65.1 65.1 44.5 44.5 0.36 0.41
1½ 33.3 33.3 73.0 73.0 50.8 50.8 0.45 0.50
2 38.1 38.1 88.9 88.9 65.1 65.1 0.80 0.80
2½ 41.3 41.3 103.2 103.2 76.2 76.2 1.14 1.20
3 44.5 44.5 122.2 122.2 93.7 93.7 1.82 1.90
4 50.8 50.8 152.4 152.4 120.7 120.7 2.86 2.90
5 57.2 57.2 179.4 179.4 141.3 141.3 4.66 4.70
6 60.3 77.8 215.9 225.4 169.9 169.9 6.45 10.50
8 69.9 98.5 263.5 292.1 220.7 220.7 10.68 16.80
10 77.8 93.7 322.3 323.9 274.7 265.1 17.73 20.90
12 85.7 103.2 377.8 397.4 325.4 317.5 26.82 27.70
14 88.9 100.0 409.6 431.8 357.2 350.8 30.00 31.80
16 93.7 106.4 463.6 466.7 408.0 403.2 34.10 46.40
18 96.8 111.1 520.7 523.9 458.8 455.6 44.10 59.10
20 101.6 119.1 571.5 582.6 508.0 509.6 53.60 71.80
24 115.9 139.7 689.0 708.0 614.4 638.2 100.00 131.80

Sch 160, XX-S

A B C APPʼWeight(kg)
Outlet Size
Sch 160 XX-s Sch 160 XX-s Sch 160 XX-s Sch 160 XX-s

½ 28.6 28.6 34.9 34.9 14.3 14.3 0.11 -

¾ 31.8 31.8 44.5 44.5 19.1 19.1 0.32 -
1 38.1 38.1 50.8 50.8 25.4 25.4 0.38 0.38
1¼ 44.5 44.5 61.9 61.9 33.3 33.3 0.57 0.57
1½ 50.8 50.8 69.9 69.9 38.1 38.1 0.80 0.80
2 55.6 55.6 81.0 81.0 42.9 42.9 1.00 1.00
2½ 61.9 61.9 96.8 96.8 54.0 54.0 1.54 1.54
3 73.0 73.0 120.7 120.7 73.0 73.0 2.90 2.90
4 84.1 84.1 152.4 152.4 98.4 98.4 4.80 4.80
5 93.7 93.7 187.3 187.3 122.2 122.2 6.50 6.50
6 104.8 104.8 220.7 220.7 146.1 146.1 12.70 12.70
8 111.1 111.1 284.2 284.2 173.0 173.0 20.50 20.50
10 125.4 125.4 312.7 312.7 215.9 215.9 38.60 38.60

- Applicable run pipe sizes are from outlet size to 36inch

259
 Forged Fittings

Sockolet

SCLT

A B C F APPʼWeight(kg)
Outlet Size
3000# 6000# 3000# 6000# 3000# 6000# 3000# 6000# 3000# 6000#

½ 25.4 31.8 34.9 44.5 23.8 19.1 31.8 0.09 0.14 0.23
¾ 27.0 36.5 44.5 50.8 30.2 25.4 36.5 0.14 0.15 0.36
1 33.3 39.7 54.0 61.9 36.5 33.3 46.0 0.21 0.27 0.59
1¼ 33.3 41.3 65.1 69.9 44.5 38.1 55.6 0.41 0.39 0.73
1½ 34.9 42.9 73.0 82.6 50.8 49.2 61.9 0.50 0.47 0.91
2 38.1 58.7 88.9 103.2 65.1 58.7 74.6 0.80 0.73 2.33
2½ 46.0 - 103.2 - 76.2 - 87.3 - 1.25 -
3 50.8 - 122.2 - 93.7 - 104.8 - 1.73 -
4 57.2 - 152.4 - 120.7 - 130.2 - 3.30 -

Threadolet

STLT

A B C F APPʼWeight(kg)
Outlet Size
3000# 6000# 3000# 6000# 3000# 6000# 3000# 6000# 3000# 6000#

½ 25.4 31.8 34.9 44.5 23.8 19.1 31.8 39.7 0.11 0.20
¾ 27.0 36.5 44.5 50.8 30.2 25.4 36.5 46.6 0.16 0.34
1 33.3 39.7 54.0 61.9 36.5 33.3 46.0 57.2 0.28 0.56
1¼ 33.3 41.3 65.1 69.9 44.5 38.1 55.6 65.1 0.41 0.71
1½ 34.9 42.9 73.0 82.6 50.8 49.2 61.9 76.2 0.45 0.89
2 38.1 52.4 88.9 103.2 65.1 69.9 74.6 92.1 0.80 2.31
2½ 46.0 - 103.2 - 76.2 - 87.3 - 1.36 -
3 50.8 - 122.2 - 93.7 - 104.8 - 1.98 -
4 57.2 - 152.4 - 120.7 - 130.2 - 3.23 -
- Applicable run pipe sizes are from outlet size to 36inch

260
 Forged Fittings

Nippolet

Run Unit
Outlet
Pipe A G D E Weight
Size T
Size (kg)
36-¾ ½ 88.9 23.9 14.0 21.3 0.36
36-1 ¾ 88.9 30.2 18.8 26.7 0.56
36-1 1 88.9 36.5 24.4 33.3 0.84
36-1 1¼ 88.9 44.5 32.5 42.2 1.22
36-2 1½ 88.9 50.8 38.1 48.3 2.00
36-2 2 88.9 65.1 49.3 60.5 3.12

Swaged Nipple

Large end Size Small end Size Length(mm)

½ ⅜-⅛ 70
¾ ½-⅛ 76
1 1 -⅛ 89
1¼ 1¼-⅛ 102
1½ 1½-⅛ 114
2 ½-⅛ 165
2½ 2 -⅛ 178
3 2½-⅛ 203
3½ 3 -⅛ 203
4 3½-⅛ 229

TBE: Threaded both end

PBE: Plain both end
PLE/TSE:Plain large end-Threded small end
BLE/TSE:Beveled large end Threaded small end
BLE/PSE:Beveled large end-Plain small end
TLE/PSE:Threaded large end-Plain small-end

Swaged Nipples are made from

Forged Steel or Pipe

261
 Forged Fittings

1. Forged Socket Welding. Threaded Fitting Bore

in millimeters.

ANSI B16.11 JIS B2316

Nominal
Pipe Size
Socket Welding(M) Threaded(T) Socket Welding(M) Threaded(T)

⅛″ 10.90, 10.65 NPT ⅛ 11.0 PT ⅛

¼″ 14.35, 14.10 NPT ¼ 14.3 PT ¼
⅜″ 17.80, 17.55 NPT ⅜ 17.8 PT ⅜
½″ 21.95, 21.70 NPT ½ 22.2 PT ½
¾″ 27.30, 27.05 NPT ¾ 27.7 PT ¾
1″ 34.05, 33.80 NPT 1 34.5 PT 1
1¼" 42.80, 42.55 NPT 1¼ 43.2 PT 1¼
1½" 48.90, 48.65 NPT 1½ 49.1 PT 1½
2" 61.35, 61.10 NPT 2 61.1 PT 2
2½" 74.20, 73.80 NPT 2½ 77.1 PT 2½
3" 90.15, 89.80 NPT 3 90.0 PT 3
4" 115.8 , 115.45 NPT 4 115.4 PT 4

2. TOLERANCE
Forged Socket Welding, Threaded Fitting (ANSI B16.11)
in millimeters.

Elbow, Half
All Fittings Couping
Tee, Cross Coupling
Nominal
Bottom of
Pipe Size Center to Bottom to
Socket Bore Bore Dia. Concentricity Concidence Socket to
Bottom of Bottom of
Dia of Fitting of Bore of Axis Opposite
Socket Socket
Face
+ 0.012
⅛-¼ ±0.03 ±0.03 ±0.06 ±0.03
- 0.000
Maximum
+ 0.012 Socket and variation in
⅜-¾ ±0.03 ±0.06 ±0.12 ±0.06
- 0.000 Fitting bores alignment of
+ 0.012 within socket and
1-2 ±0.03 ±0.03 fitting borss ±0.08 ±0.16 ±0.08
- 0.000
for⅛in 12
+ 0.012
2½-3 ±0.06 ±0.10 ±0.20 ±0.10
- 0.000

262
 Forged Fittings

3. KS B0222 & JIS B0203 Pipe Threads

Position of Basic Effective Thread Length

Screw Thread Basic Diameter
Diameter (Min)
External Internal External
External Thread Internal Thread
Thread Thread Thread

Nominal Pipe Size

Tolerances on Basic Diameters

(For Reference)
of Internal Parallel Thread

Incomplete Thread
When There is on
an Incomplete
thead or More
When there is
Nominal Size

Major Pitch Minor

The End
Height of Thread

of Pipe
Nominal Size

From the
Diameter Diameter Diameter

Fitting Allowance
Ena' of Pipe
Runding

d d2 d1
Pitch

Internal Thread
Internal Parallel

Outside Diameter
Basic Length

Internal Taper and

Internal Taper

Wall thicknese
parallel Thread
Tolerance

Tolerance
Axially

Axially

Thread

Major Pitch Minor Thread

Diameter Diameter Diameter

n p h r D D2 D1 a ±b ±C ± f l l t
PT 15 (½) 14 1.8143 1.162 0.25 20.955 19.793 18.631 8.16 1.81 2.27 0.142 5.00 12.7 15.0 9.1 21.7 2.8

PT 20(¾) 14 1.8143 1.162 0.25 26.441 25.279 24.117 9.53 1.81 2.27 0.142 5.60 14.1 16.3 10.2 27.2 2.8

PT 25(1) 11 2.3091 1.479 0.32 33.249 31.770 30.291 10.39 2.31 2.89 0.180 6.40 16.2 19.0 11.5 34.0 3.2

PT 32(1¼) 11 2.3091 1.479 0.32 41.910 40.431 38.952 12.70 2.31 2.89 0.180 6.40 18.5 21.4 13.4 42.7 3.5

PT 40(1½) 11 2.3091 1.479 0.32 47.803 46.324 44.845 12.70 2.31 2.89 0.180 6.40 18.5 21.4 13.4 48.6 3.5

PT 50(2) 11 2.3091 1.479 0.32 59.614 58.135 56.656 15.88 2.31 2.89 0.180 7.50 22.8 25.7 16.9 60.5 3.8

PT 65(2½) 11 2.3091 1.479 0.32 75.184 73.705 72.226 17.46 3.64 3.46 0.217 9.22 26.7 30.2 18.6 76.3 4.2

PT 80(3) 11 2.3091 1.479 0.32 87.884 86.405 84.926 20.64 3.64 3.46 0.217 9.22 29.9 33.3 21.1 89.1 4.2

PT 90(3½) 11 2.3091 1.479 0.32 100.330 98.851 97.372 22.23 3.64 3.46 0.217 9.30 31.5 34.9 22.4 101.6 4.2

PT 100(4) 11 2.3091 1.479 0.32 113.030 111.551 110.072 25.40 3.64 3.46 0.217 10.40 35.9 39.3 25.9 114.3 4.5

PT 125(5) 11 2.3091 1.479 0.32 138.430 136.952 135.472 25.58 3.64 3.46 0.217 11.40 40.1 43.6 29.3 139.8 4.5

PT 150(6) 11 2.3091 1.479 0.32 163.830 162.351 160.872 28.58 3.64 3.46 0.217 11.50 40.1 43.6 29.3 165.2 5.0

263
 Forged Fittings

4. ANSI B2.1 Taper Pipe Threads. (Except Dryseal)

27 18 14 11½ 8
Threads Threads Threads Threads Threads
Theread
Per inch Per inch Per inch Per inch Per inch
Element
p= p= p= p= p=
0.03704 0.05556 0.07143 0.08696 0.12500
H=0.866p 0.0321 0.4810 0.0619 0.0753 0.1082
hs=hh=0.760p 0.0281 0.0422 0.0543 0.0661 0.0950
frs=frn=0.033p 0.0012 0.0088 0.0024 0.0029 0.0041
fcs=fcn=0.073p 0.0027 0.0041 0.0052 0.0063 0.0091

Pitch Effective Handtight Engagement Effective Thread, External

Thread,
Outside Length
Nominal Threads Pitch of External Length L2
Diameter L1
Pipe Size Per inch Thread Diameter at Dia Dia
of Pipe
(NPT) n P beginning of E1 E2
D
External In. Thds. In. Thds.
Thread
1 2 3 4 5 6 7 8 9 10 11
⅛ 0.405 27.0 0.03704 0.36351 0.1615 4.36 0.37360 0.2639 7.12 0.38000
¼ 0.540 18.0 0.05556 0.47739 0.2278 4.10 0.49163 0.4018 7.23 0.50250
⅜ 0.675 18.0 0.05556 0.61201 0.2400 4.32 0.62701 0.4078 7.43 0.63750
½ 0.840 14.0 0.07143 0.75843 0.3200 4.48 0.77843 0.5337 7.47 0.79179
¾ 1.050 14.0 0.07143 0.96768 0.3390 4.75 0.98887 0.5457 7.64 1.00179
1 1.315 11.5 0.08696 1.21363 0.4000 4.60 1.23863 0.6828 7.85 1.25630
1¼ 1.660 11.5 0.08696 1.55713 0.4200 4.83 1.58338 0.7068 8.13 1.60130
1½ 1.900 11.5 0.08696 1.79609 0.4200 4.83 1.82234 0.7235 8.32 1.84130
2 2.375 11.5 0.08695 2.26902 0.4360 5.01 2.29627 0.7565 8.70 2.31630
2½ 2.875 8.0 0.12500 2.71953 0.6820 5.46 2.76216 1.1375 9.10 2.79062
3 3.500 8.0 0.12500 3.34062 0.7660 6.13 3.38850 1.2000 9.60 3.41562
3½ 4.000 8.0 0.12500 3.83750 0.8210 6.57 3.88881 1.2500 10.00 3.91562
4 4.500 8.0 0.12500 4.33438 0.8440 6.75 4.38712 1.3000 10.40 4.41562

Wrench Makeup Wrench Makeup Length for Vanish Thread Nominal, Complet Basic
Length for External Thread V Overall External Threadss Increase
Nominal Height Mimor
External Thread Lengh in Dia
Pipe of Dia
L2 L1 Length L3 External per
Size Dia Length Dia Thread at Small
In. Thds. Thread Thread,
(NPT) E3 L5 L5 h End of
In. Thds. In Thds. L4 0.0625/n
Pipe, Ka
1 12 13 14 15 16 17 18 19 20 21 22 23 24
⅛ 0.1024 2.76 0.1111 3 0.35656 0.1285 3.47 0.3924 0.1898 0.37537 0.02963 0.00231 0.3339
¼ 0.1740 3.13 0.1667 3 0.46697 0.1928 3.47 0.5946 0.2907 0.49556 0.04444 0.00347 0.4329
⅜ 0.1678 3.02 0.1667 3 0.60160 0.1928 3.47 0.6006 0.2967 0.63056 0.04444 0.00347 0.5676
½ 0.2137 2.99 0.2143 3 0.74504 0.2478 3.47 0.7815 0.3909 0.78286 0.05714 0.00446 0.7013
¾ 0.2067 2.89 0.2143 3 0.95429 0.2478 3.47 0.7935 0.4029 0.99286 0.05714 0.00446 0.9105
1 0.2828 3.25 0.2609 3 1.19733 0.3017 3.47 0.9845 0.5089 1.24543 0.06957 0.00543 1.1441
1¼ 0.2868 3.30 0.2609 3 1.54083 0.3017 3.47 1.0085 0.5329 1.59043 0.06957 0.00543 1.4876
1½ 0.3035 3.49 0.2609 3 1.77978 0.3017 3.47 1.0252 0.5496 1.83043 0.06957 0.00543 1.7265
2 0.3205 3.69 0.2609 3 2.25272 0.3017 3.47 1.0582 0.5826 2.30543 0.06957 0.00543 2.1995
2½ 0.4555 3.64 0.25007 2 2.70391 0.4337 3.47 1.5712 0.8875 2.77500 0.10000 0.00781 2.6195
3 0.4340 3.47 0.25007 2 3.32500 0.4337 3.47 1.6337 0.9500 3.40000 0.10000 0.00781 3.2406
3½ 0.4290 3.43 0.2500 2 3.82188 0.4337 3.47 1.6837 1.0000 3.90000 0.10000 0.00781 3.7375
4 0.4560 3.65 0.2500 2 4.31875 0.4337 3.47 1.7337 1.0500 4.40000 0.10000 0.00781 4.2344

264
 Forged Fittings

5. Wall Thickness Schedules.

Nominal Outside
Nominal Wall Thickness
Pipe Size Diameter
A B JIS ANSI Sch5S SchS10S Sch20S GS Sch10 LG(7.9) Sch20 Sch30 STD
8 ¼ 13.8 13.7 1.2 1.65 2.0 2.3 - - - - (2.2)
10 ⅜ 17.3 17.1 1.2 1.65 2.0 2.3 - - - - (2.3)
15 ½ 21.7 21.3 1.65 2.1 2.5 2.8 - - - - (2.8)
20 ¾ 27.2 26.7 1.65 2.1 2.5 2.8 - - - - (2.9)
25 1 34.0 33.4 1.65 2.8 3.0 3.2 - - - - (3.4)
32 1-¼ 42.7 42.2 1.65 2.8 3.0 3.5 - - - - (3.6)
40 1-½ 48.6 48.3 1.65 2.8 3.0 3.5 - - - - (3.7)
50 2 60.5 60.3 1.65 2.8 3.5 3.8 - - - - (3.9)
65 2-½ 76.3 73.0 2.1 3.0 3.5 4.2 - - - - (5.2)
80 3 89.1 88.9 2.1 3.0 4.0 4.2 - - - - (5.5)
90 3-½ 101.6 101.6 2.1 3.0 4.0 4.2 - - - - (5.7)
100 4 114.3 114.3 2.1 3.0 4.0 4.5 - - - - (6.0)
125 5 139.8 141.3 2.8 3.4 5.0 4.5 - - - - (6.6)
150 6 165.2 168.3 2.8 3.4 5.0 5.0 - 5.0 - - (7.1)
175 7 190.7 - - - - 5.3 - - - - -
200 8 216.3 219.1 2.8 3.8 6.5 5.8 - 5.8 6.4 7.0 (8.2)
225 9 241.8 - - - - 6.2 - - - - -
250 10 267.4 273.1 3.4 4.2 6.5 6.6 - 6.6 6.4 7.8 (9.3)
300 12 318.5 323.9 4.0 4.6 6.5 6.9 - 6.9 6.4 8.4 9.5
350 14 355.6 355.6 4.0 4.8 7.9 7.9 6.4 7.9 7.9 9.5 9.5
400 16 406.4 406.4 4.2 4.8 7.9 7.9 6.4 7.9 7.9 9.5 9.5
450 18 457.2 457.2 4.2 4.8 7.9 7.9 6.4 7.9 7.9 11.1 9.5
500 20 508.0 508.0 4.8 5.5 7.9 7.9 6.4 7.9 9.5 12.7 9.5
550 22 558.8 558.8 4.8 5.5 - - 6.4 7.9 9.5 12.7 9.5
600 24 609.6 609.6 5.5 6.4 - - 6.4 7.9 9.5 14.3 9.5
650 26 660.4 660.4 - - - - 7.9 7.9 12.7 - 9.5
700 28 711.2 711.2 - - - - 7.9 7.9 12.7 15.9 9.5
750 30 762.0 762.0 6.4 7.9 - - 7.9 7.9 12.7 15.9 9.5
800 32 812.8 812.8 - - - - 7.9 7.9 12.7 15.9 9.5
850 34 863.6 863.6 - - - - 7.9 7.9 12.7 15.9 9.5
900 36 914.4 914.4 - - - - 7.9 7.9 12.7 15.9 9.5
950 38 965.2 965.2 - - - - - 7.9 - - 9.5
1000 40 1016.0 1016.0 - - - - - 7.9 - - 9.5
1050 42 1066.8 1066.8 - - - - - 7.9 - - 9.5
1100 44 1117.6 1117.6 - - - - - 7.9 - - 9.5
1150 46 1168.4 1168.4 - - - - - 7.9 - - 9.5
1200 48 1219.2 1219.2 - - - - - 7.9 - - 9.5
1250 50 1270.0 1270.0 - - - - - *7.9 - - *9.5
1300 52 1320.8 1320.8 - - - - - *7.9 - - *9.5
1350 54 1371.6 1371.6 - - - - - *7.9 - - *9.5
1400 56 1422.4 1422.4 - - - - - *7.9 - - *9.5
1450 58 1473.2 1473.2 - - - - - *7.9 - - *9.5
1500 60 1524.0 1524.0 - - - - - *7.9 - - *9.5

265
 Forged Fittings

JIS G3448 ANSI B36.10M

JIS G3454 ANSI B36.19M
JIS G3455
JIS G3459

(in mm)
Outside Nominal
Nominal Wall Thickness
Diameter Pipe Size
Sch40 Sch60 XS Sch80 Sch100 Sch120 Sch140 Sch160 XXS JIS ANSI A B
2.2 2.4 ( 3.0) 3.0 - - - - - 13.8 13.7 8 ¼
2.3 2.8 ( 3.2) 3.2 - - - - - 17.3 17.1 10 ⅜
2.8 3.2 ( 3.7) 3.7 - - - 4.7 7.5 21.7 21.3 15 ½
2.9 3.4 ( 3.9) 3.9 - - - 5.5 7.8 27.2 26.7 20 ¾
3.4 3.9 ( 4.5) 4.5 - - - 6.4 9.1 34.0 33.5 25 1
3.6 4.5 ( 4.9) 4.9 - - - 6.4 9.7 42.7 42.2 32 1-¼
3.7 4.5 ( 5.1) 5.1 - - - 7.1 10.2 48.6 48.3 40 1-½
3.9 4.9 ( 5.5) 5.5 - - - 8.7 11.1 60.5 60.3 50 2
5.2 6.0 ( 7.0) 7.0 - - - 9.5 14.0 76.3 73.0 65 2-½
5.5 6.6 ( 7.6) 7.6 - - - 11.1 15.2 89.1 88.9 80 3
5.7 7.0 ( 8.1) 8.1 - - - 12.7 - 101.6 101.6 90 3-½
6.0 7.1 ( 8.6) 8.6 - 11.1 - 13.5 17.1 114.3 114.3 100 4
6.6 8.1 ( 9.5) 9.5 - 12.7 - 15.9 19.0 139.8 141.3 125 5
7.1 9.3 (11.0) 11.0 - 14.3 - 18.2 21.9 165.2 168.3 150 6
- - - - - - - - - 190.7 - 175 7
8.2 10.3 (12.7) 12.7 15.1 18.2 20.6 23.0 22.2 216.3 219.1 200 8
- - - - - - - - - 241.8 - 225 9
9.3 12.7 12.7 15.1 18.3 21.4 25.4 28.6 25.4 267.4 273.1 250 10
10.3 14.3 12.7 17.4 21.4 25.4 28.6 33.3 25.4 318.5 323.9 300 12
11.1 15.1 12.7 19.0 23.8 27.8 31.8 35.7 - 355.6 355.6 350 14
12.7 16.7 12.7 21.4 26.2 30.9 36.5 40.5 - 406.4 406.4 400 16
14.3 19.0 12.7 23.8 29.4 34.9 39.7 45.2 - 457.2 457.2 450 18
15.1 20.6 12.7 26.2 32.5 38.1 44.4 50.0 - 508.0 508.0 500 20
- 22.2 12.7 28.6 34.9 41.3 47.6 54.0 - 558.8 558.8 550 22
17.5 24.6 12.7 31.0 38.9 46.0 52.4 59.5 - 609.6 609.6 600 24
- - 12.7 - - - - - - 660.4 660.4 650 26
- - 12.7 - - - - - - 711.2 711.2 700 28
- - 12.7 - - - - - - 762.0 762.0 750 30
17.5 - 12.7 - - - - - - 812.8 812.8 800 32
17.5 - 12.7 - - - - - - 863.6 863.6 850 34
19.1 - 12.7 - - - - - - 914.4 914.4 900 36
- - 12.7 - - - - - - 965.2 965.2 950 38
- - 12.7 - - - - - - 1016.0 1016.0 1000 40
- - 12.7 - - - - - - 1066.8 1066.8 1050 42
- - 12.7 - - - - - - 1117.6 1117.6 1100 44
- - 12.7 - - - - - - 1168.4 1168.4 1150 46
- - 12.7 - - - - - - 1219.2 1219.2 1200 48
- - 12.7 - - - - - - 1270.0 1270.0 1250 50
- - 12.7 - - - - - - 1320.8 1320.8 1300 52
- - 12.7 - - - - - - 1371.6 1371.6 1350 54
- - 12.7 - - - - - - 1422.4 1422.4 1400 56
- - 12.7 - - - - - - 1473.2 1473.2 1450 58
- - 12.7 - - - - - - 1524.0 1524.0 1500 60

266
 Forged Fittings

6. Material Specifications

Y.S.
T.S.
P S Min. EL RED
C Mn Si Ni Cr Mo Min.
ASTM Grade Classification Max. Max. psi Min. Min. HB
% % % % % % psi
% % (kg/ % %
(kg/mm²)
mm²)
Max 0.60~ MAX MAX MAX MAX 70,000 36,000 MAX
A-105* Carbon Steel 0.040 0.050 22 30
0.35 1.05 0.35 0.40 0.30 0.12 (49.2) (25.3) 187
Max MAX MAX 60.000 30.000
A-181* 60 Carbon Steel 0.050 0.050 22 35
0.35 0.90 (0.35) (42.2) (21.1)
Max MAX MAX 70.000 36.000
A-181 70 Carbon Stee 0.050 0.050 18 24
0.35 0.90 (0.35) (49.2) (25.3)
Max 0.60~ 0.15~ 0.44~ 70.000 40.000 143~
A-182 F1 ½ Mo 0.045 0.045 20 30
0.35 0.90 0.35 0.65 (49.2) (28.1) 192
Max 0.30~ MAX MAX 4.00~ 0.44~ 70.000 40.000 143~
A-182 F5 5Cr-½ Mo 0.030 0.030 20 35
0.15 0.60 0.50 0.50 6.00 0.65 (49.2) (28.1) 217
Max MAX MAX MAX 4.00~ 0.44~ 90.000 65.000 187~
A-182 F5a 5Cr-½ Mo 0.040 0.030 22 50
0.25 0.60 0.50 0.50 6.00 0.65 (63.3) (45.7) 248
1¼Cr- 0.05~ 0.30~ 0.50~ 1.00~ 0.44~ 60.000 30.000 121~
A-182 F11-1 Mo 0.030 0.030 20 45
½ 0.15 0.60 1.00 1.50 0.65 (42.2) (21.1) 174
1¼Cr- 0.10~ 0.30~ 0.50~ 1.00~ 0.44~ 70.000 40.000 143~
A-182 F11-2 Mo 0.040 0.040 20 30
½ 0.20 0.80 1.00 1.50 0.65 (49.2) (28.1) 207
0.10~ 0.30~ 0.50~ 1.00~ 0.44~ 75.000 45.000 156~
A-182 F11-3 1Cr-½ Mo 0.040 0.040 20 30
0.20 0.80 1.00 1.50 0.65 (52.7) (31.6) 207
0.05~ 0.30~ MAX 0.80~ 0.44~ 60.000 30.000 121~
A-182 F12-1 1Cr-½ Mo 0.045 0.045 20 45
0.15 0.60 0.50 1.25 0.65 (42.2) (21.1) 174
0.10~ 0.30~ 0.10~ 0.80~ 0.44~ 70.000 40.000 143~
A-182 F12-2 1¼Cr-½ Mo 0.040 0.040 20 30
0.20 0.80 0.60 1.25 0.65 (49.2) (28.1) 174
0.10~ 0.30~ 0.50~ 1.00~ 0.44~ 70.000 40.000 143~
A-182 F11 1Cr-½ Mo 0.040 0.040 20 30
0.20 0.60 1.00 1.50 0.65 (49.2) (28.1) 207
0.10~ 0.30~ 0.10~ 0.80~ 0.44~ 70.000 40.000 143~
A-182 F12 1Cr-½ Mo 0.040 0.040 20 30
0.20 0.80 0.60 1.25 0.65 (49.2) (28.1) 207
MAX 0.30~ MAX 2.00~ 0.87~ 75.000 45.000 156~
A-182 F22 2¼Cr-1 Mo 0.040 0.040 20 30
0.15 0.60 0.50 2.50 1.13 (52.7) (31.6) 207
MAX MAX MAX 8.00~ 18.00~ 75.000 30.000
A-182 F304 18Cr-8 Ni 0.040 0.030 30 50
0.08 2.00 1.00 11.00 20.00 (52.7) (21.1)
18Cr-8 MAX MAX MAX 8.00~ 18.00~ 75.000 25.000
A-182 F304L Ni 0.040 0.030 30 50
Low 0.035 2.00 1.00 13.00 20.00 (49.2) (17.6)
18Cr-8 MAX MAX MAX 10.00~ 16.00~ 2.00~ 75.000 30.000
A-182 F316 Ni 0.040 0.030 30 50
MO 0.08 2.00 1.00 14.00 18.00 3.00 (52.7) (21.7)
18Cr-
MAX MAX MAX 10.00~ 16.00~ 2.00~ 65.000 25.000
A-182 F316L 8 MO- Ni 0.040 0.030 30 50
0.035 2.00 1.00 15.00 18.00 3.00 (45.7) (17.6)
LOW
MAX MAX MAX 9.00~ Min 75.000 30.000
A-182 F321 18Cr-8 Ti Ni 0.030 0.030 30 50
0.08 2.00 1.00 12.00 17.00 (52.7) (21.1)
18Cr-8 MAX MAX MAX 9.00~ 17.00~ 75.000 30.000
A-182 F347 Ni 0.030 0.030 30 50
Cb 0.08 2.00 1.00 13.00 20.00 (52.7) (21.1)
60,000~
MAX 0.75~ 0.15~ MAX MAX MAX 30.000
A-350* LF1 Carbon Steel 0.035 0.040 85,000 25 38
0.30 1.05 0.30 0.40 0.30 0.12 (42.2~59.7) (21.1)
70,000~
MAX MAX 0.15~ MAX MAX MAX 36.000
A-350* LF2 Carbon Steel 0.035 0.040 95,000 22 30
0.30 1.35 0.30 0.40 0.30 0.12 (49.2~66.8) (25.3)
70,000~
MAX MAX 0.20~ 3.25~ MAX MAX 37.500
A-350* LF3 3½ Ni 0.035 0.040 95,000 22 35
0.20 1.35 0.35 3.75 0.30 0.12 (49.2~66.8) (26.4)
∙OTHER ELEMENTS : copper (0.40% MAX.), Vanadium, (0.03% MAX.), Columbium (0.02% MAX.)
∙The sum of Cu, Ni, Cr and Mo Shall not be exceed 1.00%
∙The sum of Cr and Mo shall not be exceed 0.32%

267
 Forged Fittings

268