1 2

600mm

600mm
EL. -2.5 M
EL. -2.5 M
BOF
BOF

150 MM THICK PCC

150 MM THICK PCC
T12@6" C/C (T) T12@6" C/C (T)
T12@6" C/C (B) T12@6" C/C (B)

SECTION 1-1
SECTION 2-2

1 2
1200 mm
12 mm Bar Each
16 mm Bar Each
10 mm Bar @150mm C/C
1200 mm 1200 mm Upto plinth level CONSULTANT'S NOTES:
12 mm Bar @150mm C/C 1.
2.
ALL DIMENSIONS/DETAILS AS PER ARCH. DWGS.)
NUMBER OF STOREY'S PROPOSED: FIVE.
3. CONC. GRADE FOR R.C.C. WORK: M25.
4. STEEL GRADE : FE-550D
12 mm Bar (Both ways) @150mm C/C 5.
6.
COVER TO BARS = 60MM FOR FOUNDATION
COLUMNS : 40 MM ; BEAMS : 25 MM
Upto plinth level 7.
8.
BEAM MUST BE ANCHORED IN THE ENDS.
MINIMUM LAPPING LENGTH MUST BE 50xD
closely spaced 9.
10.
THE CONTRACTOR SHALL VERIFY ALL DIMENSIONS PRIOR TO CONSTRUCTION .
DO NOT SCALE THE DRAWINGS .
11. CODE OF PRACTICE IS 456 2000
12 mm Bar Each confining
1200 mm reinforcement in IMPORTANT NOTES:

Upto plinth level

1200 mm
10 mm Bar @150mm C/C boundary elements 1. THIS DRAWING IS UNDER COPY-RIGHT OF ARCHITECTS : " QRDS " AND SAME SHOULD
NOT BE USED IN PART OR FULL WITHOUT THE WRITTEN PERMISSION OF ARCHITECTS :
"QRDS "
1200 mm 2. THESE DRAWINGS, DETAILS, SPECIFICATIONS, QUANTITIES ETC. ARE BASED ON THE
230mm x 400mm INFORMATION SUPPLIED BY THE OWNER / POWER OF ATTORNEY HOLDER, BUILDER,
PROMOTER ETC.
3. ALL PLANS ARE SUBJECT TO SANCTION FROM CONCERNED AUTHORITIES.
12 mm Bar Each 4. ANY DISCREPANCIES IN THE DRG. SHOULD BE IMDTLY BROUGHT TO THE NOTICE OF
THE ARCHITECTS.
1200 mm 5. ALL WORK IS TO BE CARRIED OUT STRICTLY AS PER DRAWINGS AND INSTRUCTIONS
GIVEN AT SITE.
6. THE ARCHITECT WILL NOT BE RESPONSIBLE FOR INCORRRECT,BAD OR DEFECTIVE
WORK.
7. ALL TOILET SLABS TO BE TAKEN 8" SUNK/AS SPECIFIED.
8. ALL PROJECTED TERRACE SLABS TO BE TAKEN 8" SUNK.
1. maximum spacing of vertical 9. ALL THE DIMENSIONS ARE IN METERS UNLESS MENTIONED OTHERWISE.

12 mm Bar (Both ways) @ 150 mm C/C reinforcement should not be R.C.C. NOTES:
1200 mm FOOTING - PLAN more than 300mm NO COLUMNS, BEAMS/ R.C.C WORK IS TO BE CHISSELED FOR:

2. maximum spacing of a)
b)
LIFT INSTALLATION
PLUMBING & SANITATION
150 MM THICK PCC horizontal reinforcement c)
d)
ELECTRICAL CONDUITING
LEVELLING OF SURFACES
e) ANY OTHER
should not be more than
300mm SHEET SPECIFIC NOTES:
FOOTING - PLAN 3. Shear wall thickness 230 mm 1.
2.
TRENCH DEPTH = 2500MM (FROM GROUND LEVEL)
PREFERABLE START POINT / REFERENCE POINT IS "D"

ARCHITECT: STRUCTURAL CONSULTANT:

QUADRIVIUM RESEARCH AND DESIGN STUDIO
JAMNIPALI, KORBA, SHEET NO :
FRAME & BRICKS
Design Consultancy . Interiors . Turn Key PROJECT TITLE : 50 BED HOSPITAL, KORBA
CHATTISGARH-495450

-
GSTIN : 36AAAFQ9454A1ZD PH: +91-8717803660 (Mr. RAKESH LAKRA)
Mob No. : +91 8219514178, +91 7024506041 +91-6260786544 (Mr. ANURAG EKKA)
104, FIRST FLOOR, CHANDAN MAHAL, OPP. PILLAR NO. 3, E.mail - lakra.rakesh@gmail.com SHEET TITLE : SHEAR WALL DETAILS
Whatsapp no. : +91 9362660036
Email ID : qrds.info@gmail.com RUKANPURA, BAILEY ROAD, PATNA, BIHAR - 801106
Location : Manipur, Chandigarh,
Hyderabad, Bilaspiu FRAME & BRICKS CHECKED : APPROVED : SCALE : NTS DATE : 24th FEB 2023, Friday