Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    K Factor K Mu/bd PT RQD: Dia@ Dia@

    Uploaded by

    ghansa
    This document provides calculations for the design of reinforcement in a roof slab coupler subjected to a bending moment of 4100 kNm. It calculates the required area of steel reinforcement as 8119 mm2 based on the material properties, section dimensions, and code equations provided. It then specifies providing 32 mm diameter bars at 135 mm centers, which provides an area of 11915 mm2, meeting the requirement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    K Factor K Mu/bd PT RQD: Dia@ Dia@

    Uploaded by

    ghansa
    24 views1 page
    This document provides calculations for the design of reinforcement in a roof slab coupler subjected to a bending moment of 4100 kNm. It calculates the required area of steel reinforcement as 8119 mm2 based on the material properties, section dimensions, and code equations provided. It then specifies providing 32 mm diameter bars at 135 mm centers, which provides an area of 11915 mm2, meeting the requirement.

    Original Title

    ROOF SLAB COUPLER

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides calculations for the design of reinforcement in a roof slab coupler subjected to a bending moment of 4100 kNm. It calculates the required area of steel reinforcement as 8119 mm2 based on the material properties, section dimensions, and code equations provided. It then specifies providing 32 mm diameter bars at 135 mm centers, which provides an area of 11915 mm2, meeting the requirement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views1 page

    K Factor K Mu/bd PT RQD: Dia@ Dia@

    Uploaded by

    ghansa
    This document provides calculations for the design of reinforcement in a roof slab coupler subjected to a bending moment of 4100 kNm. It calculates the required area of steel reinforcement as 8119 mm2 based on the material properties, section dimensions, and code equations provided. It then specifies providing 32 mm diameter bars at 135 mm centers, which provides an area of 11915 mm2, meeting the requirement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    BENDING REINF.

    CALCULATION ROOF SLAB COUPLER

    Mu = 4100.0 KNm
    Clear Cover to reinf. nc = 100 mm
    Dia of stirrups/link Lbar = 10 mm
    Grade of Concrete fck = 35 N/mm2
    Grade of Main Reinf. fy = 500 N/mm2
    Grade of shear reinf fy = 415 N/mm2
    Width of secion b = 1000 mm
    Dia of spacer bar s = 32 mm
    Depth of section D = 1400 mm

    Effective Depth of section d = D-nc-Lbar-dia/2

    dia = Long. Bar Diameter in mm

    assuming dia = 25 mm

    d= = 1277.5 mm

    Limiting Moment Mu, lim = 0.36*xumax/d*(1 - 0.42*xumax/d)*fck*b*d2

    Mu, lim /fckbd2 = 0.133 (Ref:SP-16 Table-C)

    Hence Mu,lim = 8682.27 KNm

    As Mu is less tha Mu,lim , section shall be designed as singly reinf. Section(ref Appendix G, IS 456-2000)

    Mu = 0.87*fy*Ast*d*(1 - Ast*fy/b*d*fck)

    K Factor K=Mu/bd2 = 2.512

    %b of area of steel req pt rqd = 50*fck*(1-SQRT(1-4.6*K/fck))/fy


    = 0.636 %

    As rqd = pt rqd x bx d/100


    = 8119 mm2

    As,min = 0.12x bxD/100


    1680 mm2

    Hence req As As rqd = 8119 mm2

    Provide 32 dia@ 135 mm C/C


    32 dia@ 135 mm C/C
    As Prov = 11915 mm2 OK

    COUPLER-ROOF SLAB/Bending Moment Design

    You might also like