DPET

Front Cover Page
1
Front Cover Page-Inside
2
Back Cover Page-Inside
3
Back Cover Page
4
CURRICULUM-2016
(C-16)
Diploma in
Petroleum Technology
State Board of Technical Education and Training

Andhra Pradesh
3 Years DIPLOMA IN PETROLEUM TECHNOLOGY

5
(C-16)
CONTENTS
S.NO. SUBJECT CODE SUBJECT Page No
________________________________________________________________________
1. Preamble
2. Scheme of Instruction and Examination of I year
3. Scheme of Instruction and Examination of III semester
4. Scheme of Instruction and Examination of IV semester
5. Scheme of Instruction and Examination of V semester
6. Scheme of Instruction and Examination of VI semester
FIRST YEAR
7. PET-101 English
8. PET-102 Engineering Mathematics - I
9. PET-103 Engineering Physics
10. PET-104 Engineering Chemistry and Environmental Studies
11. PET-105 General Geology & Petroleum Geology
12. PET-106 Basic Mechanical Engineering
PRACTICALS
13. PET-107 Engineering Drawing
14. PET-108 General Geology & Petroleum Geology Lab
15. PET-109 Physics Lab
16. PET-110 Chemistry Laboratory
17. PET-111 Computer Fundamentals Lab
III SEMESTER
18. PET-301 Engineering Mathematics – II

19. PET-302 Electrical Technology
20. PET-303 Fluid Mechanics
21. PET-304 Drilling and Well Completions
22. PET-305 Petroleum Exploration Methods
PRACTICALS
6
23. PET-306 Petroleum Analysis Lab
24. PET-307 Drilling Fluids Lab
25. PET-308 Geophysical Methods of Exploration Lab
26. PET-309 Fluid Mechanics Lab
IV SEMESTER
27. PET-401 Reservoir Engineering

28. PET-402 Petroleum Refining Engineering & Petrochemical Technology
29. PET-403 Well Logging & Formation Evaluation
30. PET-404 Heat Transfer
31. PET-405 Mass Transfer
PRACTICALS
32. PET-406 Reservoir Engineering Lab
33. PET-407 Mass Transfer Lab
34. PET-408 Communication Skills
35. PET-409 Heat Transfer Lab
V SEMESTER
36. PET-501 Industrial Management and Smart Technologies

37. PET-502 Instrumentation and Process Control
38. PET-503 Thermodynamics
39. PET-504 HSE & FF in Petroleum Industry
40. PET-505 Oil & Gas Production Engineering
PRACTICALS
41. PET-506 Petroleum Equipment Design & Simulation Lab
42. PET-507 Instrumentation and Process Control Lab
43. PET-508 Reservoir Simulation Lab
44. PET-509 Life Skills
VI SEMESTER
45. PET-601 Industrial Training
CURRICULUM-2016
7
( C-16 )
FOR DIPLOMA COURSES IN ANDHRA PRADESH
PREAMBLE
The State Board of Technical Education and Training, Andhra Pradesh under the
aegis of the Department of Technical Education, Andhra Pradesh generally reviews the
Curricula once in every five years. However, recognizing the needs of the industries and
enhancing the employability skills of Polytechnic students, the Government of Andhra
Pradesh constituted a committee vide G.O.Rt.No:95 of Higher Education (TE) Dept dated:
29-4-2016 and G.O.Rt.No:98 of Higher Education (TE) Dept dated: 4-5-2016 for updation of
polytechnic curriculum under the chairmanship of Sri. S. Balasubrahmanyam, IAS (Retd.,).
The committee submitted a report on 31-5-2016 making certain recommendations and
suggesting new initiatives to be incorporated in the curriculum. An Industry Institute
Interaction Meet was organized with Industry experts and subject experts on 26-12-2016 and
the suggestions from Industrialists have also been incorporated in the curriculum. The new
Curricula for the different diploma courses have been designed with the active participation
of the members of the faculty teaching in the Polytechnics of Andhra Pradesh, besides
reviewed by Expert Committee constituted with eminent academicians.
The primary objective of the curricular change is to produce best technicians in the
country by correlating growing needs of the industries with the academic input.
The revised New Curriculum i.e., Curriculum–2016 (C-16) is approved by BoG of

SBTET for its implementation with effect from 2016-17.
Salient Features:
1. Duration of course is either 3 years / 3½ years duration of Regular Academic
Instruction.
2. The Curriculum is prepared in Semester Pattern. However, First Year is maintained as
Year-wise pattern.
3. 6 Months/ 1 year Industrial Training is introduced for all the Diploma courses.
4. Fundamentals of Internet of Things (IOT) is introduced for all the Diploma courses in
the subject.
5. Modern subjects relevant to the industry are introduced in all the Diploma courses.
6. CISCO course content has been incorporated into the ECE and CME courses to get
certification from CISCO along with Diploma.
7. The policy decisions taken at the State and Central level with regard to environmental
science are implemented by including relevant topics in Chemistry. This is also in
accordance with the Supreme Court guidelines issued in Sri Mehta‘s case.
8
8. Keeping in view the increased need of communication skills which is playing a major
role in the success of Diploma Level students in the Industries, emphasis is given for
learning and acquiring listening, speaking, reading and writing skills in English.
Further as emphasized in the meetings, Communication Skills lab and Life Skills lab
are introduced for all the branches.
9. Modern topics relevant to the needs of the industry and global scenario suitable to be
taught at Diploma level are also incorporated in the curriculum.
10. AutoCAD specific to the branch has been given more emphasis in the curriculum.
Preparing drawings using CAD software has been given more importance.
11. Every student is exposed to the computer lab at the 1st year itself in order to
familiarize himself with skills required for keyboard/mouse operation, internet usage
and e-mailing.
12. Upon reviewing the existing C-14 curriculum, it is found that the theory content is
found to have more weightage than the Practical content. In the revised C-16
curriculum, more emphasis is given to the practical content of Laboratories and
Workshops, thus strengthening the practical skills.
13. With increased emphasis for the student to acquire Practical skills, the course content
in all the subjects is thoroughly reviewed and structured as outcome based than the
conventional procedure based.
14. Curricula of Laboratory and Workshops have been thoroughly revised based on the
suggestions received from the industry and faculty, for better utilization of the
equipment available at the Polytechnics. The experiments /exercises that are chosen for
the practical sessions are identified to conform to the field requirements of industry.
15. The Members of the working group are grateful to Sri G.S. Panda Das, I.A.S., Special
Commissioner of Technical Education & Chairman of SBTET, AP. and Sri.
Adityanath Das, I.A.S., Principal Secretary of Higher Education for their guidance and
valuable inputs in revising, modifying and updating the curriculum.
16. The Members acknowledge with thanks the cooperation and guidance provided by Sri.
A.Nirmal Kumar Priya, Secretary, SBTET, Andhra Pradesh and other officials of
Directorate of Technical Education and the State Board of Technical Education,
Andhra Pradesh, experts from industry, academia from the universities and higher
learning institutions and all teaching fraternity from the Polytechnics who are directly
or indirectly involved in preparation of the curricula.
RULES AND REGULATIONS
1 DURATION AND PATTERN OF THE COURSES
All the Diploma programs run at various institutions are of AICTE approved 3 years
or 3½ years duration of academic instruction.
All the Diploma courses are run on year wise pattern in the first year, and the
remaining two or two & half years are run in the semester pattern. In respect of few
courses like Diploma in BM course, the training will be in the seventh semester. Run-
9
through system is adopted for all the Diploma Courses, subject to eligibility
conditions.
2 PROCEDURE FOR ADMISSION INTO THE DIPLOMA COURSES:
Selection of candidates is governed by the Rules and regulations laid down in this
regard from time to time.
a) Candidates who wish to seek admission in any of the Diploma courses will have to
appear for Common Entrance Test for admissions into Polytechnics (POLYCET)
conducted by the State Board of Technical Education and Training, Andhra Pradesh,
Vijayawada.
Only the candidates satisfying the following requirements will be eligible to appear for
the Common Entrance Test for admissions into Polytechnics (POLYCET).
b) The candidates seeking admission should have appeared for S.S.C examination,
conducted by the Board of Secondary Education, Andhra Pradesh or equivalent
examination thereto, at the time of making application to the Common Entrance Test
for admissions into Polytechnics (POLYCET). In case of candidates whose results of
their Qualifying Examinations is pending, their selection shall be subject to production
of proof of their passing the qualifying examination in one attempt or compartmentally
at the time of admission
c) Admissions are made based on the merit obtained in the Common Entrance Test
(POLYCET) and the reservation rules stipulated by the Government of Andhra
Pradesh from time to time.
d) For admission into the following Diploma Courses for which entry qualification is
10+2, candidates need not appear for POLYCET. A separate notification will be
issued for admission into these courses.
1). D.H.M.C.T. 2).D. Pharmacy
3 MEDIUM OF INSTRUCTION
The medium of instruction and examination shall be English.
4 PERMANENT IDENTIFICATION NUMBER (PIN)
A cumulative / academic record is to be maintained of the Marks secured in

sessional work and end examination of each year for determining the eligibility for
promotion etc., A Permanent Identification Number (PIN) will be allotted to each
admitted candidate to maintain academic records.
5 NUMBER OF WORKING DAYS PER SEMESTER / YEAR:
a). The Academic year for all the Courses shall be in accordance with the Academic
Calendar.
b). The Working days in a week shall be from Monday to Saturday
c). There shall be 7 periods of 50 minutes duration on all working days.
d). The minimum number of working days for each semester / year shall be 90 / 180
days excluding examination days. If this prescribed minimum is not achieved
due to any reason, special arrangements shall be made to conduct classes to
cover the syllabus.
10
6 ELIGIBILITY OF ATTENDANCE TO APPEAR FOR THE END EXAMINATION
a). A candidate shall be permitted to appear for the end examination in all subjects,
if he or she has attended a minimum of 75% of working days during the
year/Semester.
b). Condonation of shortage of attendance in aggregate upto 10% (65% and above
and below 75%) in each semester or 1st year may be granted on medical
grounds.
c). A stipulated fee shall be payable towards condonation for shortage of

attendance.
d). Candidates having less than 65% attendance shall be detained.
e). Students whose shortage of attendance is not condoned in any semester / 1st
year and not paid the condonation fee in time are not eligible to take their end
examination of that class and their admissions shall stand cancelled. They may
seek re-admission for that semester / 1st year when offered next.
7 READMISSION
Readmission shall be granted to eligible candidates by the respective Principal/
Regional Joint Director.
1. a) Within 15 days after commencement of class work in any semester (Except

Industrial Training).
b) For Industrial Training: before commencement of the Industrial training.
2. Within 30 days after commencement of class works in any year (including

D. Pharmacy course or first year course in Engineering and Non Engineering
Diploma streams).
Otherwise such cases shall not be considered for readmission for that semester /
year and are advised to seek readmission in the next subsequent eligible
academic year.
The percentage of attendance of the readmitted candidates shall be calculated

from the first day of beginning of the regular class work for that year / Semester,
as officially announced by CTE/SBTET but not from the day on which he/she has
actually reported to the class work, after readmission is granted.
8 SCHEME OF EXAMINATION
a) First Year
THEORY EXAMINATION: Each Subject carries 80% marks with examination of

3 hours duration, along with 20% marks for internal evaluation. (Sessional
marks). However, there are no minimum marks prescribed for sessionals.
11
PRACTICAL EXAMINATION: There shall be 40% Marks for regular practical
work done, i.e. sessional marks for each practical subject with an end
examination of 3 hours duration carrying 60% marks. However, there are no
minimum marks prescribed for sessionals.
b) III, IV, V, VI and VII Semesters:
THEORY EXAMINATION: Each subject carries usually 80 marks and 30 marks

in respect of specified subjects of 3hours duration, along with 20 marks for
internal evaluation (sessional marks) respectively.
PRACTICAL EXAMINATION: Each subject carry 60/30 marks of 3hours

duration 40/20 sessional marks.
9 INTERNAL ASSESSMENT SCHEME

a) Theory Subjects: Theory Subjects carry 20% sessional marks, Internal
examinations will be conducted for awarding sessional marks on the dates
specified. Three unit tests will be conducted for I year students and two Unit
Tests for semesters. Average of marks obtained in all the prescribed tests will
be considered for awarding the sessional marks.
b) Practical Subjects: Student‘s performance in Laboratories / Workshop shall be

assessed during the year/ semester of study for 40% marks in each practical
subject. Allotment of marks should be discrete taking into consideration of the
students‘ skills, accuracy, recording and performance of the task assigned to him
/ her. Each student has to write a record / log book for assessment purpose. In
the subject of Drawing, which is also considered as a practical paper, the same
rules hold good. Drawing exercises are to be filed in seriatum.
c) Internal assessment in Labs / workshops / Survey field work etc., during the
course of study shall be done and sessional marks shall be awarded by the
concerned Lecturer / Senior Lecturer / Workshop superintendent as the case
may be.
d) For practical examinations, except in drawing, there shall be two examiners.

External examiner shall be appointed by the Principal in consultation with
respective Head of Section preferably choosing a qualified person from any local
Industry/ nearby Government Polytechnic/ Local Government Organization.
Internal examiner shall be the person concerned with internal assessment as in
(c) above. The end examination shall be held along with all theory papers in
respect of drawing.
e) Question Paper for Practicals: Question paper should cover all the experiments /
exercise prescribed.
f) Records pertaining to internal assessment marks of both theory and practical

subjects are to be maintained for official inspection.
12
g) In case of Diploma courses having Industrial Training, the training
assessment shall be done and the marks are to be awarded in the following
manner.
Industrial assessment : 200 marks (in two spells of 100 marks each)
Maintenance of log book : 30 marks
Record Work : 30 marks
Seminar / viva-voce : 40 marks
---------------
TOTAL : 300 marks
---------------
The assessment at the institution level (Seminar/Viva-voce)shall be done by three

members, viz., Internal Faculty member, External Examiner and Head of Section and
be averaged.
10 MINIMUM PASS MARKS
THEORY EXAMINATION:
For passing a theory subject, a candidate has to secure a minimum of 35% in end
examination and a combined minimum of 35% of both Sessional and end
examination marks put together.
PRACTICAL EXAMINATION:
For passing a practical subject, a candidate has to secure a minimum of 50% in end
examination and a combined minimum of 50% of both sessional and practical end
examination marks put together. In case of D.C.C.P., the pass mark for typewriting
and short hand is 45% in the end examination. There are no sessional marks for
typewriting and Shorthand subjects of D.C.C.P course.
11. PROVISION FOR IMPROVEMENT
1. Improvement is allowed only after he / she has completed all the subjects from First
Year to Final semester of the Diploma.
2. Improvement is allowed in any 4 (Four) subjects of the Diploma.
3. The student can avail of this improvement chance ONLY ONCE, that too within the
succeeding two examinations after the completion of Diploma. However, the duration
including Improvement examination shall not exceed FIVE years from the year of first
admission.
4. No improvement is allowed in Practical / Lab subjects or Project work or

Industrial Training assessment. However, improvement in drawing subject(s) is
allowed.
13
5. If improvement is not achieved, the marks obtained in previous Examinations hold
good.
6. Improvement is not allowed in respect of the candidates who are punished under
Mal-practice in any Examination.
7. Examination fee for improvement shall be paid as per the notification issued by State
Board of Technical Education and Training from time to time.
8. All the candidates who wish to appear for improvement of performance shall deposit
the original Marks Memos of all the years / Semesters and also original Diploma
Certificate to the Board. If there is improvement in performance of the current
examination, the revised Memorandum of marks and Original Diploma Certificate will
be issued, else the submitted originals will be returned.
12. RULES OF PROMOTION FROM 1ST YEAR TO 3,rd, 4,th 5th ,6th and 7th SEMESTERS:
a) For Diploma Courses of 3 Years duration
i. A candidate shall be permitted to appear for first year examination provided he / she
puts in 75% attendance (which can be condoned on Medical grounds upto 10%) i.e.
attendance after condonation on Medical grounds should not be less than 65% and
pay the examination fee.
ii. A candidate shall be promoted to 3rd semester if he/she puts the required percentage
of attendance in the first year and pays the examination fee. A candidate who
could not pay the first year examination fee has to pay the promotion fee as
prescribed by State Board of Technical Education and Training from time to time
before commencement of 3rd semester.
iii. A candidate shall be promoted to 4th semester provided he/she puts the required
percentage of attendance in the 3rd semester and pay the examination fee. A
candidate who could not pay the 3rd semester exam fee, has to pay the promotion fee
as prescribed by State Board of Technical Education and Training from time to time
before commencement of 4th semester.
A candidate is eligible to appear for the 4th semester examination if he/she
i) Puts the required percentage of attendance in the 4th semester
ii) Should not have failed in more than Four backlog subjects of 1st year
For IVC & ITI Lateral Entry Students:
A candidate is eligible to appear for the 4th semester examination if he/she puts
the required percentage of attendance in the 4th semester
iv) A candidate shall be promoted to 5th semester provided he / she puts the required
percentage of attendance in the 4th semester and pays the examination fee. A
candidate, who could not pay the 4th semester examination fee, has to pay the
14
promotion fee as prescribed by State Board of Technical Education and Training
from time to time before commencement of 5th semester.
ii) Should get eligibility to appear for 4th Semester examination.
For IVC& ITI Lateral Entry students:

ii) Should not have failed in more than Four backlog subjects of 3rd Semester
v) A candidate shall be promoted to 6th semester provided he/she puts in the required
percentage of attendance in the 5th semester and pay the examination fee. A
candidate who could not pay the 5th semester examination fee, has to pay the
A candidate is eligible to appear for 6th semester Industrial Training assessment

(Seminar/Viva-voce)
i) Puts the required percentage of attendance, ie., 90% in 6th semester Industrial
Training
ii) Should get eligibility to appear for 4th Semester Examination.
For IVC & ITI Lateral Entry students:
Training.
ii) should get eligibility to appear for 5th Semester Examination.
Important Note:
Seminar/Viva-voce should not be conducted for Not-Eligible Candidates, till the

candidate gets eligibility. The record of internal assessment for Industrial
Training for 260 marks shall be maintained at Institution Level for all
candidates and the data is to be uploaded only for eligible candidates. For not
eligible candidates the data is to be uploaded as and when the candidate gets
eligibility.
b) For Diploma Courses of 3 ½ Years duration (MET/ CH/ CHPP/ CHPC/ CHOT/ TT ):
1. A candidate shall be permitted to appear for 1st year examination provided he / she
15
2. A candidate shall be promoted to 3rd semester if he/she puts the required percentage
of attendance in the 1st year and pays the examination fee. A candidate who could not
pay the 1st year examination fee has to pay the promotion fee as prescribed by State
Board of Technical Education and Training from time to time before commencement of
3rd semester.
3. A candidate shall be promoted to 4th semester provided he/she puts the required
candidate, who could not pay the 3rd semester exam fee, has to pay the promotion fee
as prescribed by State Board of Technical Education and Training from time to time
before commencement of 4th semester.
A candidate is eligible to appear for the 4th semester exam if he/she

ii) Should not have failed in more than Four backlog subjects of 1st year.
(i) Puts the required percentage of attendance in the 4th semester
4. A candidate shall be promoted to 5th semester industrial training provided he / she

puts the required percentage of attendance in the 4th semester and pays the
examination fee. A candidate, who could not pay the 4th semester examination fee,
has to pay the promotion fee as prescribed by State Board of Technical Education and
Training from time to time before commencement of 5th semester.
5. Promotion from 5th to 6th semester is automatic (i.e., from 1st spell of Industrial
Training to 2nd spell) provided he/she puts the required percentage of attendance,
which in this case ie.,90 % of attendance and attends for the VIVA-VOCE examination
at the end of training.
6. A candidate shall be promoted to 7th semester provided he / she puts the required
promotion fee as prescribed by State Board of Technical Education and Training from
time to time before commencement of 7th semester.
7. A candidate shall be promoted to 7th semester of the course provided he/she has
successfully completed both the spells of Industrial Training.
A candidate is eligible to appear for 7th semester examination if he/she

ii) Should get eligibility to appear for 4th semester Examination.

ii) Should not have failed more than four backlog subjects of 3rd Semester
OTHER DETAILS
16
a) In case a candidate does not successfully complete the Industrial training, he
/ she will have to repeat the training at his / her own cost.
b) The I spell of Industrial training shall commence 10 days after the completion
of the last theory examination of 4th Semester.
c) The Second spell of Industrial training shall commence within 10 days after
the completion of I spell of Industrial training.
c) For Diploma Courses of 3 ½ Years duration (BM):
The same rules which are applicable for conventional courses also apply for this
course. The industrial training in respect of this course is restricted to one semester (6
months) after the 6th semester (3 years) of the course.
1. A candidate shall be permitted to appear for first year examination provided he / she
2. A candidate shall be promoted to 3rd semester if he/she puts the required percentage
of attendance in the first year and pays the examination fee. A candidate who could
not pay the first year examination fee has to pay the promotion fee as prescribed by
State Board of Technical Education and Training from time to time before
commencement of 3rd semester.
candidate who could not pay the 3rd semester examination fee, has to pay the
promotion fee as prescribed by State Board of Technical Education and Training from
time to time before commencement of 4th semester.
ii) Should not have failed in more than Four backlog subjects of 1st year
For IVC & ITI Lateral Entry Students:
A candidate is eligible to appear for the 4th semester examination if he/she puts
the required percentage of attendance in the 4th semester
4. A candidate shall be promoted to 5th semester provided he / she puts the required
17
A candidate is eligible to appear for the 5th semester exam if he/she
i) Puts the required percentage of attendance in the 5 th semester
ii) Should get eligibility to appear for 4th Semester examination.
iii) Puts the required percentage of attendance in the5th semester

iv) Should not have failed in more than Four backlog subjects of 3rd
Semester
5. A candidate shall be promoted to 6th semester provided he/she puts in the required
percentage of attendance in the 5th semester and pays the examination fee.
A candidate who could not pay the 5th semester examination fee, has to pay the
A candidate is eligible to appear for 6th semester examination
i) Puts the required percentage of attendance in 6th semester and
i) Puts the required percentage of attendance in 6th semester.

percentage of attendance in 6th semester and pay the examination fee. A candidate, who
could not pay the 6th semester examination fee, has to pay the promotion fee prescribed
by SBTET from time to time before commencement of the 7th semester (Industrial
Training).
A candidate is eligible to appear for 7th semester Industrial Training assessment
(Seminar/Viva-voce) if he/she
Training
Training.
Important Note:
18
Seminar/Viva-voce should not be conducted for Not-Eligible Candidates, till the
candidate gets eligibility. However, the record of internal Assessment for
Industrial Training for 260 marks shall be maintained at Institution Level for all
candidates and the data is to be uploaded only for eligible candidates. For not
eligible candidates the data is to be uploaded as and when the candidate gets
eligibility.
OTHER DETAILS
a) In case a candidate does not successfully complete the Industrial training, he

/ she will have to repeat the training at his / her own cost.
b) The Industrial training shall commence 10 days after the completion of the
last theory examination of 6th Semester.
13. STUDENTS PERFORMANCE EVALUATION
Successful candidates shall be awarded the Diploma under the following divisions of
pass.
1. First Class with Distinction shall be awarded to the candidates who secure an
overall aggregate of 75% marks and above.
2. First Class shall be awarded to candidates who secure overall aggregate of

60% marks and above and below 75% marks.
3. Second Class shall be awarded to candidates who secure a pass with an

overall aggregate of below 60%.
The Weightage of marks for various year/Semesters which are taken for
computing overall aggregate shall be 25% of I year marks + 100% of 3rd and
subsequent Semesters.
In respect IVC & ITI Lateral Entry candidates who are admitted directly into
diploma course at the 3rd semester (i.e., second year) level the aggregate of
(100%) marks secured at the 3rd and subsequent semesters of study shall be
taken into consideration for determining the overall percentage of marks
secured by the candidates for award of class/division.
4. Second Class shall be awarded to all students, who fail to complete the
Diploma in the regular 3 years/ 3 ½ years and four subsequent
examinations, from the year of first admission.
14. EXAMINATION FEE SCHEDULE:
The examination fee should be as per the notification issued by State Board of
Technical Education and Training from time to time.
15. STRUCTURE OF END EXAMINATION QUESTION PAPER:
19
The question paper for theory examination is patterned in such a manner that the
Weightage of periods/marks allotted for each of the topics for a particular subject be
considered Examination paper is of 3/6/9 hours duration.
a) Each theory paper consists of Section ‗A‘ and Section ‗B‘. Section ‗A‘ contains 10
short answer questions. All questions are to be answered and each carries 3
marks Max. Marks: 10 x 3 = 30.
Section B contains 8 essay type questions including Numerical questions, out of
which 5 questions each carrying 10 marks are to be answered.
Max.Marks: 5 x 10 = 50.
Total Maximum Marks: 80.
b) For Engineering Drawing Subject (107) consist of section ‗A‘ and section ‗B‘.
Section ‗A‘ contains four (4) questions. All questions in section ‗A‘ are to be
answered and each carries 5 marks. Max. Marks: 4 x 5=20. Section ‗B‘ contains
six (6) questions. Out of which four (4) questions to be answered and each
question carries 10 Marks. Max. Marks 4 x 10 = 40.
c) Practical Examinations
For Workshop practice and Laboratory Examinations, Each student has to pick
up a question paper distributed by Lottery System.
Max. Marks for an experiment / exercise : 50%
Max. Marks for VIVA-VOCE : 10%
Total : 60% (of total marks for the subject)
In case of practical examinations with 50 marks, the marks will be worked out
basing on the above ratio.
In case of any change in the pattern of question paper, the same shall be
informed sufficiently in advance to the candidates.
16. ISSUE OF MEMORONDUM OF MARKS
All candidates who appear for the end examination will be issued memorandum of
marks without any payment of fee. However candidates who lose the original
memorandum of marks have to pay the prescribed fee to the Secretary, State Board
of Technical Education and Training, A.P. for each duplicate memo.
17. MAXIMUM PERIOD FOR COMPLETION OF DIPLOMA COURSES:
Maximum period for completion of the diploma courses is twice the duration of the
course from the date of First admission (includes the period of detention and
discontinuation of studies by student etc) failing which they will have to forfeit the
claim for qualifying for the award of Diploma (They will not be permitted to appear for
examinations after that date). This rule applies for all Diploma courses of 3 years and
3 ½ years of engineering and non-engineering courses.
18. ELIGIBILITY FOR AWARD OF DIPLOMA
20
A candidate is eligible for award of Diploma Certificate if he / she fulfils the
following academic regulations.
i. He / She pursued a course of study for not less than 3 / 3 ½ academic years
& not more than 6 / 7 academic years.
ii. He / she has completed all the subjects.
Students who fail to fulfill all the academic requirements for the award of the
Diploma within 6 / 7 academic years from the year of admission shall forfeit
their seat in the course & their seat shall stand cancelled.
i. He / She pursued a course of study for not less than 2 / 2 ½ academic years
& not more than 4 / 5 academic years.
ii. He / she has completed all the subjects.
Students who fail to fulfill all the academic requirements for the award of the
Diploma within 4 / 5 academic years from the year of admission shall forfeit
their seat in the course & their seat shall stand cancelled.
19. ISSUE OF PHOTO COPY OF VALUED ANSWER SCRIPT, RECOUNTING&

REVERIFICATION:
A) FOR ISSUE OF PHOTO COPIES OF VALUED ANSWER SCRIPTS

1. A candidate desirous of applying for Photo copy of valued answer script/
scripts should apply within prescribed date from the date of the declaration
of the result.
2. Photo copies of valued answer scripts will be issued to all theory subjects and
Drawing subject(s).
3. The Photo copy of valued answer script will be dispatched to the concerned
candidate‘s address as mentioned in the application form by post.
4. No application can be entertained from third parties.
B) FOR RE-COUNTING(RC) and RE-VERIFICATION(RV) OF THE VALUED ANSWER SCRIPT

1. A candidate desirous of applying for Re-verification of valued answer script should
apply within prescribed date from the date of the declaration of the result.
2. Re-verification of valued answer script shall be done for all theory subjects and
Drawing subject(s).
3. The Re-verification committee constituted by the Secretary, SBTETAP with subject
experts shall re-verify the answer scripts.
I) RE-COUNTING
The Officer of SBTET will verify the marks posted and recount them in the already
valued answer script. The variations if any will be recorded separately, without making any
21
changes on the already valued answer script. The marks awarded in the original answer
script are maintained (hidden).
2) RE-VERIFICATION
(i) The Committee has to verify the intactness and genuineness of the answer script(s)
placed for Re-verification.
(ii) Initially single member shall carry out the re-verification.
(iii) On re-verification by single member, if the variation is less than 12% of maximum
marks, and if there is no change in the STATUS in the result of the candidate, such
cases will not be referred to the next level ie., for 2-Tier evaluation.
(iv) On re-verification by a single member, if the variation is more than 12% of maximum
marks, it will be referred to 2-Tier evaluation.
(v) If the 2-Tier evaluation confirms variation in marks as more than 12% of maximum
marks, the variation is considered as follows:
a) If the candidate has already passed and obtains more than 12% of the maximum
marks on Re-verification, then the variation is considered.
b) If the candidate is failed and obtains more than 12% of the maximum marks on Re-
verification and secured pass marks on re-verification, then the status of the
candidate changes to PASS.
c) If a candidate is failed and obtains more than 12% of the maximum marks on Re-
verification and if the marks secured on re-verification are still less than the minimum
pass marks, the status of the candidate remain FAIL only.
(vii) After Re-verification of valued answer script the same or change if any therein on Re-
verification, will be communicated to the candidate.
(viii) On Re-verification of Valued Answer Script if the candidate‘s marks are revised, the
fee paid by the candidate will be refunded or else the candidate has to forfeit the fee
amount.
4. No request for Photo copies/ Recounting /Re-verification of valued answer script would
be entertained from a candidate who is reported to have resorted to Malpractice in that
examination.
20. MAL PRACTICE CASES:
If any candidate resorts to Mal Practice during examinations, he / she shall

be booked and the Punishment shall be awarded as per SBTETAP rules and
regulations in vogue.
21. DISCREPANCIES/ PLEAS:
Any Discrepancy /Pleas regarding results etc., shall be represented to the

SBTETAP within one month from the date of issue of results. Thereafter, no such
cases shall be entertained in any manner.
22. ISSUE OF DUPLICATE DIPLOMA
If a candidate loses his/her original Diploma Certificate and desires a

duplicate to be issued he/she should produce written evidence to this effect. He / she
may obtain a duplicate from the Secretary, State Board of Technical Education and
Training, A.P., on payment of prescribed fee and on production of an affidavit signed
before a First Class Magistrate (Judicial) and non-traceable certificate from the
Department of Police. In case of damage of original Diploma Certificate, he / she may
22
obtain a duplicate certificate by surrendering the original damaged certificate on
payment of prescribed fee to the State Board of Technical Education and Training,
A.P.
In case the candidate cannot collect the original Diploma within 1 year from
the date of issue of the certificate, the candidate has to pay the penalty prescribed by
the SBTET from time to time.
23. ISSUE OF MIGRATION CERTIFICATE AND TRANSCRIPTS:
The Board on payment of prescribed fee will issue these certificates for the
candidates who intend to prosecute Higher Studies in India or Abroad.
24. GENERAL
i. The Board may change or amend the academic rules and regulations or
syllabi at any time and the changes or amendments made shall be applicable
to all the students, for whom it is intended, with effect from the dates notified
by the competent authority.
ii. All legal matters pertaining to the State Board of Technical Education and
Training are within the jurisdiction of Vijayawada.
iii. In case of any ambiguity in the interpretation of the above rules, the decision
of the Secretary, SBTET, A.P is final.
23
DIPLOMA IN PETROLEUM TECHNOLOGY (D-PET)
SCHEME OF INSTRUCTIONS AND EXAMINATION
(FIRST YEAR)
C-16 Curriculum
Instruction
Scheme of Examination
periods / week Total
Subject
Name of the Subject Period End
Code Practical Duration Sessional Total
Theory / year Exam
/Tutorial (hours) Marks Marks
Marks
THEORY:
PET-101 English 03 - 90 3 20 80 100
PET-102 Engineering Mathematics - I 05 - 150 3 20 80 100
PET-103 Engineering Physics 04 - 120 3 20 80 100
Engineering Chemistry
PET-104 04 - 120 3 20 80 100
and Environmental studies
General Geology &
PET-105 04 - 120 3 20 80 100
Petroleum Geology
Basic Mechanical
PET-106 04 - 120 3 20 80 100
Engineering
PRACTICAL:
PET-107 Engineering Drawing - 06 180 3 40 60 100
General Geology &
PET-108 Petroleum Geology - 03 90 3 40 60 100
Laboratory
PET-109 Physics Laboratory - 03 90 3 20 30 50
PET-110 Chemistry Laboratory - 03 90 3 20 30 50
Computer fundamentals
PET-111 - 03 90 3 40 60 100
Laboratory
TOTAL 24 18 1260 280 720 1000
PET-101, 102, 103, 104, 107 : Common to all.

PET-105, 106 : Not common to any course
Note: 30 students will go to Physics Lab and the remaining 30 will go to Chemistry Lab
24
(III Semester)
C-16 Curriculum
Instruction
Scheme Of Examinations
Total Periods
Per Semester
Periods/Week
End Exam
Sub Code Name of the Subject
Sessional
Duration
Practical
Theory
Marks
Marks
Marks
Total
(hrs)
THEORY SUBJECTS
PET-301 Engineering Mathematics-II 5 - 75 3 20 80 100
PET-302 Electrical Technology 4 - 60 3 20 80 100
PET-303 Fluid Mechanics 5 - 75 3 20 80 100
PET-304 Drilling and Well Completions 5 - 75 3 20 80 100

Petroleum Exploration
PET-305 5 - 75 3 20 80 100
Methods
PRACTICAL SUBJECTS
PET-306 Petroleum Analysis Lab - 6 90 3 40 60 100
PET-307 Drilling Fluids Lab - 6 90 3 40 60 100

Geophysical Methods of
PET-308 - 3 45 3 40 60 100
Exploration Lab
PET-309 Fluid Mechanics Lab - 3 45 3 40 60 100
Total 24 18 630 260 640 900
PET-301 : Common to all

PET-302, 303, 309 : Common with DCHE
PET-304, 305,306, 307, 308 : Not common to any course
25
(IV Semester)
C-16 Curriculum
Instruction
Scheme Of
Total Periods Per

Examinations
Periods/Week
Semester
EndExam
Sessional
Duration
Practical
Theory
Marks
Marks
Marks
Total
(hrs)
THEORY SUBJECTS
PET-401 Reservoir Engineering 5 - 75 3 20 80 100

Petroleum Refining Engineering &
PET-402 5 - 75 3 20 80 100
Petrochemical Technology
PET-403 Well Logging & Formation Evaluation 4 - 60 3 20 80 100
PET-404 Heat Transfer 5 - 75 3 20 80 100
PET-405 Mass Transfer 5 - 75 3 20 80 100
PRACTICAL SUBJECTS
PET-406 Reservoir Engineering Lab - 6 90 3 40 60 100
PET-407 Mass Transfer Lab - 6 90 3 40 60 100
PET-408 Communication skills - 3 45 3 40 60 100
PET-409 Heat Transfer Lab - 3 45 3 40 60 100
Total 24 18 630 260 640 900
PET-401, 402, 403,406, 407 : Not common with any course

PET-404, 405,409 : Common with DCHE
PET-408 : Common to All
26
(V Semester)
C-16 Curriculum
Instruction
Scheme Of
Total Periods Per

Examinations
Periods/Week
Semester
End Exam
Sessional
Duration
Practical
Theory
Marks
Marks
Marks
Total
(hrs)
THEORY SUBJECTS
Industrial Management and Smart
PET-501 5 - 75 3 20 80 100
Technologies
PET-502 Instrumentation & Process Control 5 - 75 3 20 80 100
PET-503 Thermodynamics 4 - 60 3 20 80 100
PET-504 HSE & FF in Petroleum Industry 5 - 75 3 20 80 100
PET-505 Oil & Gas Production Engineering 5 - 75 3 20 80 100
PRACTICAL SUBJECTS
Petroleum Equipment Design &
PET-506 - 6 90 3 40 60 100
Simulation Lab
PET-507 Instrumentation & Process Control Lab - 3 45 3 40 60 100
PET-508 Life Skills - 3 45 3 40 60 100
PET-509 Reservoir Simulation Lab - 6 90 3 40 60 100
Total 24 18 630 260 640 900
PET-503, 504, 505, 506, 508 : Not common with any course
PET-502, 507 : Common with DCHE
PET-501, 509 : Common to all
27
(VI Semester)
C-16 Curriculum
S.NO Subject/Subject code Duration Items Max Marks

1.First Assessment
100
(Viva Voce)
2.Second Assessment
100
(Viva Voce)
Practical Training in the 6 3.At the institution after completion of training
1
Industry/PET-601 Months
a) Log Book 30
b) Training Report 30
c) Seminar 40
Total Per Semester = 300 Marks
 The Industrial Training shall carry 300 marks and Pass marks are 50%.
 A candidate failing to secure the minimum marks should complete it at his own
expenses.
 During Industrial Training the candidate shall put in a minimum of 90% attendance.
28
I YEAR
29
(FIRST YEAR)
C-16 Curriculum
Instruction
Scheme of Examination
periods / week Total
Subject
Name of the Subject Period End
Code Practical Duration Sessional Total
Theory / year Exam
/Tutorial (hours) Marks Marks
Marks
THEORY:
PET-101 English 03 - 90 3 20 80 100
PET-102 Engineering Mathematics - I 05 - 150 3 20 80 100
PET-103 Engineering Physics 04 - 120 3 20 80 100
Engineering Chemistry
PET-104 04 - 120 3 20 80 100
and Environmental studies
General Geology &
PET-105 04 - 120 3 20 80 100
Petroleum Geology
Basic Mechanical
PET-106 04 - 120 3 20 80 100
Engineering
PRACTICAL:
PET-107 Engineering Drawing - 06 180 3 40 60 100
General Geology &
PET-108 - 03 90 3 40 60 100
Petroleum Geology Lab
PET-109 Physics Lab - 03 90 3 20 30 50
PET-110 Chemistry Lab - 03 90 3 20 30 50
PET-111 Computer fundamentals Lab - 03 90 3 40 60 100
TOTAL 24 18 1260 280 720 1000
PET-101, 102, 103, 104, 107 : Common to all.

PET-105, 106 : Not common to any course
Note: 30 students will go to Physics Lab and the remaining 30 will go to Chemistry Lab
30
ENGLISH
(Common to all Branches)
Subject Title : ENGLISH

Subject Code : PET-101
Periods per Week :3
Periods per Year : 90
Time Schedule& Weightage
Titles of No of No of
Sl Major No. of Weightage
the Short Long
No Topics Periods of Marks
Lessons Answers Answers
Lessons
1,2&
Vocabulary&
Regular
1 Need for
and 5 13 1 1
English
essential
vocabulary
Lessons
2 Grammar 11,12 &
30 31 7 1
19 to 26
Lessons
3 Reading
13 To 18 10 10 - 1
Lessons
4 Writing
27 To 40 30 40 - 4
English in Lessons 3
5
Action To 10 15 16 2 1
Total 90 110 10 08
Rationale and Scope

Globalization has ushered in an era of opportunities for those who have the necessary
competencies. Effective communication is one among them. This shift demands
strengthening of English in polytechnics. In C-16 Curriculum the focus is on the special
needs of English for technicians.
This course aims at integration of the four fold language abilities viz., listening,
speaking, reading and writing. The use of English for learning technical subjects and for
performing technical functions like, writing reports, giving instructions and interpreting
graphics/data is of great importance. Therefore the curriculum C-16 focuses on improving
communicative abilities equipping the students to become industry- ready and employable.
On completion of this course the student will be able to:
1.0 Build vocabulary in the direction of future needs

2.0 Learn various grammatical structures
3.0 Read and comprehend English and understand the details and draw inferences
4.0 Learn to be competent in various forms of written communication (writing
composition and data interpretation)
5.0 Practice spoken communication suited to various situations.
31
1.0 Extend their vocabulary in the direction of their future needs
1.1 Locate words, learn spellings, understand meanings
1.2 Pronounce words intelligibly
1.3 Find synonyms and antonyms
1.4 Use affixation
1.5 Comprehend meanings of words by understanding meanings of roots
2.0 Learn various grammatical structures

2.1 Identify and use nouns
2.2 Identify and use pronouns
2.3 Use the present tense
2.4 Use the past tense
2.5 Use the future tense
2.6 Identify and use adjectives
2.7 Identify and use adverbs
2.8 Use prepositions
2.9 Use linkers
2.10 State basic sentence structures
2.11 Construct different types of sentences
2.12 Frame questions to elicit information
2.13 Frame questions for confirmation
2.14 Use active voice
2.15 Use passive voice
2.16 Use direct speech
2.17 Use indirect speech
2.18 Identify and correct errors
3.0 Read and comprehend English

3.1 Identify the main ideas
3.2 Identify the specific details
3.3 Draw inferences
3.4 Give contextual meanings of the words
3.5 Perceive tone in a text
4.0 Learn to excel in various forms of written communication (writing composition

and data interpretation)
4.1 Identify components of a good paragraph
4.2 Write types of paragraphs
4.3 Distinguish between formal and informal letters
4.4 Write personal letters
4.5 Write leave letters
4.6 Write official letters
4.7 Write letters of complaints
4.8 Prepare a resume
4.9 Write a cover letter
4.10 Write short messages
4.11 Report incidents
4.12 Report experiments
4.13 Report Industrial visits
4.14 Write work done statements
32
4.15 Write maintenance reports
4.16 Make notes using Cue method and Mapping method
4.17 Summarize Paragraphs
4.18 Present and Interpret Data from flow charts, tree diagrams, bar graphs, tables, pie
charts
Practice spoken communication suited to various situations.

4.19 Use appropriate expressions to greet and take leave
4.20 Use proper expressions to make requests
4.21 Use apt expressions for asking and giving directions
4.22 Use suitable expressions to seek and offer suggestions
4.23 Use suitable expressions to state intentions
4.24 Use suitable expressions to state feelings
4.25 Use appropriate expressions to state agreement and disagreement
4.26 Use proper expressions to make complaints
4.27 Use suitable expressions to express obligations
Course Material
The textbook prepared by the faculty of English of Polytechnics in AP.
Reference Books:
S.No. Title of the book Author
1 Essential English Grammar (Intermediate Level) Raymond Murphy
Learn English
Santanu Sinha
2 ( A Fun Book of Functional Language, Grammar and
Chaudhuri
Vocabulary)
3 Grammar Builder (Entire Series) Oxford University Press
4 High School English Grammar ( Revised Edition) Wren and Martin
Sentence skills with Readings ( fourth Edition, Tata John Langan, Paul
5
McGraw Hill) Langan
6 Word Power Made Easy Norman Lewis
Shashi Kumar and
7 Spoken English
Dhamija
33
ENGINEERING MATHEMATICS - I
Subject Title : Engineering Mathematics - I
Periods per Week :5
TIME SCHEDULE
S. Weightage
Major Topic No of Periods Short Type Essay Type
No of Marks
Unit - I : Algebra Theory Practice R U App R U App
1 Logarithms 3 0 0 0 0 0 0 0 0
2 Partial Fractions 5 0 3 0 1 0 0 0 0
Matrices and
3 10 10 16 2 0 0 0 0 1
Determinants
Unit - II :
Trigonometry
4 Trigonometric Ratios 2 0 0 0 0 0 0 0 0
5 Compound Angles 3 2 3 1 0 0 0 0 0
Multiple and
6 4 4 3 0 1 0 0 0 0
Submultiple angles
7 Transformations 4 4 5 0 0 0 1/2 0 0
Inverse Trigonometric
8 3 2 5 0 0 0 0 1/2 0
Functions
Trigonometric
9 3 2 5 0 0 0 1/2 0 0
Equations
Properties and
10 4 4 5 0 0 0 0 0 1/2
solutions of triangles
11 Hyperbolic Functions 2 0 0 0 0 0 0 0 0
12 Complex Numbers 4 2 3 1 0 0 0 0 0
Unit III : Co-

ordinate Geometry
13 Straight Lines 5 3 6 1 1 0 0 0 0
14 Circle 4 2 5 0 0 0 0 1/2 0
15 Conic Sections 4 3 5 0 0 0 0 1/2 0

Unit – IV :
Differential Calculus
16 Limits and Continuity 4 2 3 0 1 0 0 0 0
34
17 Differentiation 18 10 23 1 0 0 1 1 0
S.
Major Topic No of Periods Short Type Essay Type
No
Weightage
Unit - V : of Marks
Applications of Theory Practice R U App R U App
Differentiation
Geometrical
18 3 2 5 0 0 0 0 0 1/2
Applications
19 Physical Applications 2 2 5 0 0 0 0 0 1/2
20 Maxima and Minima 3 4 5 0 0 0 0 0 1/2

Errors and
21 2 0 5 0 0 0 0 0 1/2
Approximations
2 3
Total 92 58 110 6 4 0 2
1/2 1/2
Marks 18 12 0 20 25 35
R: Remembering type 38 marks

U: Understanding type 37 marks
App: Application type 35 marks
35
ENGINEERING MATHEMATICS – I
COMMON TO ALL BRANCHES PET– 102
Objectives
Upon completion of the course the student shall be able to:
UNIT – I
Algebra
1.0 Use Logarithms in engineering calculations
1.1 Define logarithm and list its properties.
1.2 Distinguish natural logarithms and common logarithms.
1.3 Explain the meaning of e and exponential function.
1.4 State logarithm as a function and its graphical representation.
1.5 Use the logarithms in engineering calculations.
2.0 Resolve Rational Fraction into sum of Partial Fractions in engineering problems
2.1 Define the following fractions of polynomials:
1. Rational,
2. Proper and
3. Improper
2.2 Explain the procedure of resolving rational fractions of the type mentioned below
into partial fractions
f (x) f (x)
i) ii )
( x  a )( x  b )( x  c ) 2
( x  a ) ( x  b )( x  c )
f (x) f (x)
iii ) iv )
2 2 2
(x  a )( x  b ) ( x  a )( x  b)
3.0 Use Matrices for solving engineering problems

3.1 Define a matrix and order of a matrix.
3.2 State various types of matrices with examples (upto 3rd order square matrices).
3.3 Compute sum, scalar multiplication and product of matrices.
3.4 Illustrate the properties of these operations such as associative, distributive,
commutative properties with examples and counter examples.
3.5 Define the transpose of a matrix and write its properties.
3.6 Define symmetric and skew-symmetric matrices.
3.7 Resolve a square matrix into a sum of symmetric and skew- symmetric matrices
with examples in all cases.
3.8 Define minor, co-factor of an element of 2x2 and 3x3 square matrices with
examples.
3.9 Expand the determinant of a 3 x 3 matrix using Laplace expansion formula.
3.10 Distinguish singular and non-singular matrices.
3.11 State properties of determinants with simple examples.
3.12 Define multiplicative inverse of a matrix and list properties of adjoint and inverse.
3.13 Compute adjoint and multiplicative inverse of a square matrix.
3.14 Representation of system of linear equations (2 variables in 2 equations and 3
variables in 3 equations) in matrix form.
3.15 Solve system of linear equations using Cramer‘s rule.
3.16 Solve system of linear equations by matrix inversion method
3.17 State elementary row operations.
3.18 Solve a system of linear equations by Gauss- Jordan method
36
UNIT – II
Trigonometry:
4.0 Understand Trigonometric Ratios
4.1 Define trigonometric ratios of any angle.
4.2 List the values of trigonometric ratios at specified values.
4.3 Draw graphs of trigonometric functions
4.4 Explain periodicity of trigonometric functions.
5.0 Solve simple problems on Compound Angles
5.1 Define compound angles and state the formulae of Sin (A±B), Cos (A±B), Tan
(A±B) and Cot (A±B)
5.2 Give simple examples on compound angles to derive the values of Sin150, Cos150 ,
Sin750 , Cos750 , Tan 150 , Tan750 etc.
5.3 Derive identities like sin (A+B) sin (A-B) = sin 2 A –sin2 B etc.,
5.4 Solve simple problems on compound angles.
6.0 Solve problems using the formulae for Multiple and Sub- multiple Angles
6.1 Derive the formulae of multiple angles 2A, 3A etc and sub multiple angles A/2 in
terms of angle A of trigonometric functions.
6.2 Derive useful allied formulas like sinA= (1- cos2A)/2 etc.,
6.3 Solve simple problems using the above formulae
7.0 Apply Transformations for solving the problems in Trigonometry
7.1 Derive the formulae on transforming sum or difference of two trigonometric ratios
in to a product and vice versa- examples on these formulae.
8.0 Use Inverse Trigonometric Functions for solving engineering problems
8.1 Explain the concept of the inverse of a trigonometric function by selecting an
appropriate domain and range.
8.2 Define inverses of six trigonometric functions along with their domains and ranges.
8.3 Derive relations between inverse trigonometric functions so that given A= sin-1x,
express angle A in terms of other inverse trigonometric functions - with examples.
8.4 State various properties of inverse trigonometric functions and identities like

sin-1x+cos-1 x = etc.
2
 
1 1 1
x  y
ta n x  ta n y  ta n , w here x  0 , y  0 , xy  1
8.5 Derive formulae like
1  xy
etc., and solve simple problems.

9.0 Solve Trigonometric Equations in engineering applications
9.1 Explain what is meant by solutions of trigonometric equations and find the general
solutions of sin x=k, cos x =k and tan x=k with appropriate examples.
9.2 Solve models of the type a sin2 x + b sin x +c=0, a cos x + b sin x=c etc., and
problems using simple transformations.
10.0 Appreciate Properties of triangles and their solutions
10.1 State sine rule, cosine rule, tangent rule and projection rule.
10.2 Explain the formulae for sin A/2, cos A/2, tan A/2 and cot A/2 in terms of semi-
perimeter and sides a, b, c.
10.3 List various formulae for the area of a triangle.
10.4 Solve problems using the above formulae.
10.5 Solve a triangle when (i) three sides, (ii) two sides and an included angle, (iii) two
sides and an opposite angle-case of two solutions and (iv) one side and two angles
are given.
11.0 Represent the Hyperbolic Functions in terms of logarithm functions
11.1 Define Sinh x, cosh x and tanh x and list the hyperbolic identities.
37
11.2 Represent inverse hyperbolic functions in terms of logarithms.
12.0 Represent Complex numbers in various forms
12.1 Define complex number, its modulus, conjugate and list their properties.
12.2 Define the operations on complex numbers with examples.
12.3 Define amplitude of a complex number
12.4 Represent the complex number in various forms like modulus-amplitude (polar)
form, Exponential (Euler) form – illustrate with examples.
12.5 State DeMoivre‘s theorem and its applications to complex numbers e.g., finding
the roots, powers, simplifications of a complex number with illustrative examples
UNIT - III
Coordinate Geometry
13.0 Solve the problems on Straight lines
13.1 Write the different forms of a straight line – point slope form, two point form,
intercept form, normal form and general form
13.2 Solve simple problems on the above forms
13.3 Find distance of a point from a line, acute angle between two lines, intersection of
two non-parallel lines and distance between two parallel lines.
14.0 Solve the problems on Circles
14.1 Define locus of a point – circle and its equation.
14.2 Find the equation of a circle given
(i) Center and radius
(ii) Two ends of a diameter
(iii) Centre and a point on the circumference
(iv) Three non collinear points
14.3 Write the general equation of a circle and find the centre and radius.
15.0 Appreciate the properties of Conics in engineering applications
15.1 Define a conic section.
15.2 Explain the terms focus, directrix, eccentricity, axes and latus rectum of a conic
with illustrations.
15.3 Find the equation of a conic when focus, directrix and eccentricity are given
15.4 Describe the properties of Parabola, Ellipse and Hyperbola in standard form.
UNIT - IV
16.0 Use the concepts of Limit and Continuity for solving the problems
16.1 Explain the concept of limit and meaning of lim f ( x )  l and state the properties
x a
of limits.
n n x
x  a s in x ta n x a 1
16.2 Mention the Standard limits li m , lim , lim , lim ,
x a x a x 0 x x 0 x x 0 x
x 1 x
e 1  1 
li m , lim (1  x ) x , lim  1   (All without proof).
x 0 x x 0 x   x 
16.3 Solve the problems using the above standard limits
2
a x b xc f (x)
16.4 Evaluate the limits of the type lim
2
and lim
x l x  x x  g (x)
16.5 Explain the concept of continuity of a function at a point and on an interval with
some examples whether a given function is continuous or not.
17.0 Appreciate Differentiation and its meaning in engineering situations
38
17.1 State the concept of derivative of a function y = f(x) – definition, first principle as
f (x  h)  f (x)
li m and also provide standard notations to denote the derivative
h 0 h
of a function.
17.2 State the significance of derivative in scientific and engineering applications.
17.3 Find the derivatives of elementary functions like xn , ax, ex, log x, sin x, cos x, tanx,
Secx, Cosecx and Cot x using the first principles.
17.4 Find the derivatives of simple functions from the first principle.
17.5 State the rules of differentiation of sum, difference, scalar multiplication, product
and quotient of functions with illustrative and simple examples.
17.6 Explain the method of differentiation of a function of a function (Chain rule) with
illustrative examples such as
2 2 2 x
(i) t  (ii) x s in 2 x (iii) (iv)
t x
2
1
lo g  s in (c o s x )  .
17.7 Find the derivatives of Inverse Trigonometric functions and examples using the
Trigonometric transformations.
17.8 Explain the method of differentiation of a function with respect to another function
and also differentiation of parametric functions with examples.
17.9 Find the derivatives of hyperbolic functions.
17.10 Explain the procedures for finding the derivatives of implicit function with
examples.
17.11 Explain the need of taking logarithms for differentiating some functions with
examples like [f(x)]g(x).
17.12 Explain the concept of finding the higher order derivatives of second and third
order with examples.
17.13 Explain the concept of functions of several variables, partial derivatives and
difference between the ordinary and partial derivatives with simple examples.
17.14 Explain the definition of Homogenous function of degree n
17.15 Explain Euler‘s theorem for homogeneous functions with applications to simple
problems.
UNIT - V
Applications of the Differentiation
18.0 Understand the Geometrical Applications of Derivatives

18.1 State the geometrical meaning of the derivative as the slope of the tangent to the
curve y = f(x) at any point on the curve.
18.2 Explain the concept of derivative to find the slope of tangent and to find the
equation of tangent and normal to the curve y = f(x) at any point on it.
18.3 Find the lengths of tangent, normal, sub-tangent and sub normal at any point on the
curve y = f(x).
18.4 Explain the concept of angle between two curves and procedure for finding the
angle between two given curves with illustrative examples.
19.0 Understand the Physical Applications of Derivatives
19.1 Explain the derivative as a rate of change in distance-time relations to find the
velocity and acceleration of a moving particle with examples.
19.2 Explain the derivative as a rate measurer in the problems where the quantities like
volumes, areas vary with respect to time- illustrative examples.
20.0 Use Derivatives to find extreme values of functions
39
20.1 Define the concept of increasing and decreasing functions.
20.2 Explain the conditions to find points where the given function is increasing or
decreasing with illustrative examples.
20.3 Explain the procedure to find the extreme values (maxima or minima) of a function
of single variable - simple problems yielding maxima and minima.
20.4 Solve problems on maxima and minima in applications like finding areas, volumes,
etc.
21.0 Use Derivatives to find Errors and Approximations
21.1 Find the absolute error, approximate error, relative error and percentage error in
functions of single variable.
COURSE CONTENT:
Unit-I
Algebra
1. Logarithms:
Definition of logarithm and its properties, natural and common logarithms; the meaning of
e and exponential function, logarithm as a function and its graphical representation.
2. Partial Fractions:
Rational, proper and improper fractions of polynomials. Resolving rational fractions in to
their partial fractions covering the types mentioned below:
f (x) f (x)
i) ii )
( x  a )( x  b )( x  c ) 2
( x  a ) ( x  b )( x  c )
f (x) f (x)
iii ) iv )
2 2 2
(x  a )( x  b ) ( x  a )( x  b)
Matrices:
3. Definition of matrix, types of matrices-examples, algebra of matrices-equality of two
matrices, sum, scalar multiplication and product of matrices. Transpose of a matrix-
Symmetric, skew symmetric matrices-Minor, cofactor of an element-Determinant of a
square matrix-Laplace‘s expansion, properties of determinants. Singular and non singular
matrices-Adjoint and multiplicative inverse of a square matrix- examples-System of linear
equations in 2 or 3 variables-Solutions by Cramer‘s rule, Matrix inversion method-
examples-Elementary row operations on matrices -Gauss-Jordan method to solve a system
of equations.
Unit-II
Trigonometry:
4. Trigonometric ratios: definition of trigonometric ratios of any angle, values of
trigonometric ratios at specified values, draw graphs of trigonometric functions,
periodicity of trigonometric functions.
5. Compound angles: Formulas of sin (A±B), cos (A±B), tan (A±B), cot (A±B) and related
identities with problems.
6. Multiple and sub multiple angles: trigonometric ratios of multiple angles 2A, 3A and
submultiple angle A/2 with problems.
7. Transformations of products into sums or differences and vice versa simple problems
8. Inverse trigonometric functions: definition, domains and ranges-basic properties-
problems.
9. Trigonometric equations: concept of a solution, principal value and general solution of
trigonometric equations:
40
sin x =k , cos x= k, tan x =k.
Solutions of simple quadratic equations, equations involving usage of transformations-
problems.
10. Properties and solutions of triangles: relation between sides and angles of a triangle- sine
rule, cosine rule, tangent rule and projection rule-area of a triangle- solving a triangle-
problems.
11. Hyperbolic functions: Definitions of hyperbolic functions, identities of hyperbolic
functions, inverse hyperbolic functions and expression of inverse hyperbolic functions in
terms of logarithms.
12. Complex Numbers: Definition of a complex number, Modulus and conjugate of a
complex number, Arithmetic operations on complex numbers, Modulus- Amplitude
(polar) form, Exponential form (Euler) form of a complex number- Problems.
DeMoivre‘s Theorem and its applications in complex numbers- Simple problems.
UNIT-III
Coordinate geometry
13. Straight lines: various forms of straight lines, angle between lines, perpendicular distance
from a point, distance between parallel lines-examples.
14. Circle: locus of a point, Circle definition-Circle equation given (i) center and radius, (ii)
two ends of a diameter (iii) centre and a point on the circumference (iv) three non
collinear points - general equation of a circle - finding center, radius.
15. Definition of a conic section, equation of a conic when focus directrix and eccentricity are
given. Properties of parabola, ellipse and hyperbola, standard forms.
UNIT-IV
16. Concept of Limit- Definition- Properties of Limits and Standard Limits -Simple
Problems-Continuity of a function at a point- Simple Examples only.
17. Concept of derivative- definition (first principle) - different notations-derivatives of
elementary functions - problems. Derivatives of sum, product, quotient, scalar
multiplication of functions - problems. Chain rule, derivatives of inverse trigonometric
functions, derivative of a function with respect to another function, derivative of
parametric functions, derivative of hyperbolic, implicit functions, logarithmic
differentiation – problems in each case. Higher order derivatives - examples – functions
of several variables – partial differentiation, Euler‘s theorem-simple problems.
UNIT-V
Applications of Derivatives:
18. Geometrical meaning of the derivative, equations of Tangent and normal to a curve at any
point. Lengths of tangent, normal, sub tangent and subnormal to the curve at any point.
Angle between the curves - problems.
19. Physical applications of the derivative – velocity, acceleration, derivative as a rate
Measure – Problems.
20. Applications of the derivative to find the extreme values – Increasing and decreasing
functions, finding the maxima and minima of simple functions - problems leading to
applications of maxima and minima.
21. Applications of derivative in finding errors and approximations of functions and simple
problems.
41
Reference Books:
1. A text book of matrices by Shanti Narayan,
2. Plane Trigonometry by S.L Loney
3. Co-ordinate Geometry by S.L Loney
4. Thomas Calculus, Pearson Addison-Wesley publishers
5. Calculus – I by Shanti Narayan and Manicavachgam Pillai, S.V Publications
42
ENGINEERING PHYSICS
Subject Title : Engineering Physics

Periods per week : 04
Total periods per year : 120
TIME SCHEDULE
S.No Major Topics No. of Weightage of Short Essay Type
Periods Marks Answer Type
1. Units and Dimensions 08 03 1 -
2. Elements of Vectors 12 13 1 1
3. Kinematics 14 13 1 1
4. Friction 08 10 - 1
5. Work, Power and Energy 12 10 - 1
6. Simple Harmonic Motion 12 13 1 1
7. Heat & Thermodynamics 12 13 1 1
8. Sound 12 13 1 1
9. Properties of matter 10 06 2 -
10. Electricity & magnetism 12 13 1 1
11. Modern Physics 08 03 1 -
Total: 120 110 10 8
OBJECTIVES
Upon completion of the course the student shall be able to
1.0 Understand the concept of Units and dimensions

1.1 Explain the concept of Units
1.2 Define t h e t e r m s
a ) Physical quantity, b ) F u n d a m e n t a l physical quantities and
c ) D erived physical quantities
1.3 Define unit
1.4 Define fundamental units and derived units
1.5 State SI units with symbols
1.6 State Multiples and submultiples in SI system
1.7 State Rules of writing S.I. units
1.8 State advantages of SI units
1.9 Define Dimensions
1.10 W r i t e Dimensional formulae
1.11 Derive dimensional formulae of physical quantities
1.12 List dimensional constants and dimensionless quantities
1.13 State the principle of Homogeneity of Dimensions
1.14 State the applications of Dimensional analysis
1.15 State the limitations of dimensional analysis
1.16 Solve problems
2.0 Understand the concept of Elements of Vectors
2.1 Explain the concept of Vectors
2.2 Define Scalar and Vector quantities
2.3 Give examples for scalar and vector quantities
2.4 Represent vectors graphically
2.5 Classify the Vectors
43
2.6 Resolve the vectors
2.7 Determine the Resultant of a vector by component method
2.8 Represent a vector in space using unit vectors ( I, j, k )
2.9 State triangle law of addition of vectors
2.10 State parallelogram law of addition of vectors
2.11 Illustrate parallelogram law of vectors in case of flying bird and sling.
2.12 Derive expression for magnitude and direction of resultant of two vectors
2.13 State polygon law of addition of vectors
2.14 Explain subtraction of vectors
2.15 Define Dot product of two vectors with examples (Work done, Power)
2.16 Mention the properties of Dot product
2.17 Define Cross products of two vectors with examples (Torque, Linear
velocity)
2.18 Mention the properties of Cross product.
2.19 Solve t h e r e l a t e d n u m e r i c a l problems
3.0 Understand the concept of Kinematics

3.1 Write the equations of motion in a straight line
3.2 Explain the acceleration due to gravity
3.3 Derive expressions for vertical motion
a) Maximum Height, b) time of ascent, c) time of descent, and d) time of flight
3.4 Derive height of a tower when a body projected vertically upwards from the
top of a tower.
3.5 Explain projectile motion with examples
3.6 Explain Horizontal projection
3.7 Derive an expression for the path of a projectile in horizontal projection
3.8 Explain oblique projection
3.9 Derive an expression for the path of projectile in oblique projection
3.10 Derive formulae for projectile in oblique projection
a) Maximum Height, b) time of ascent, c) time of descent, and d) time of flight
e) Horizontal Range, f) Maximum range
4.0 Understand the concept of Friction

4.1 Define friction
4.2 Classify the types of friction and define
4.3 Explain the concept of Normal reaction
4.4 State the laws of friction
4.5 Define coefficients of friction
4.6 Explain the Angle of friction
4.7 Derive an expression for acceleration of a body on a rough horizontal
surface
4.8 Derive an expression for the displacement and time taken to come to rest over
a rough horizontal surface
4.9 Define Angle of repose
4.10 Derive expressions for acceleration of a body on a smooth inclined plane (up
and down)
4.11 Derive expressions for acceleration of a body on a rough inclined plane (up
and down)
4.12 List the Advantages and Disadvantages of friction
4.13 Mention the methods of minimizing friction
44
5.0 Understand the concepts of Work, Power, and Energy

5.1 Define t h e t e rm s 1 .W ork, 2. Power and Energy
5.2 State SI units and dimensional formulae for 1.Work, 2. Power, and Energy
5.3 Define potential energy and state examples
5.4 Derive the expression for Potential energy
5.5 Define kinetic energy and state examples
5.6 Derive the expression for kinetic energy
5.7 State and derive Work- Energy theorem
5.8 Derive the relation between Kinetic energy and momentum
5.9 State the law of conservation of energy and mention examples
5.10 Verify the law of conservation of energy in the cases of a freely falling
body and vertically projected body in the upward direction
6.0 Understand the concept of Simple harmonic motion

6.1 Define Simple harmonic motion
6.2 Give examples for Simple harmonic motion
6.3 State the conditions of Simple harmonic motion
6.4 Explanation of SHM in terms of projection of circular motion on any one of
the diameters of the circular path
6.5 Derive expression for displacement
6.6 Derive expression for velocity
6.7 Derive expression for acceleration
6.8 Derive expression for Time period and frequency of S H M
6.9 Define phase of S H M and explain from the expression of displacement
6.10 Define Ideal simple pendulum and derive expression for Time period of
simple pendulum
6.11 State the laws of motion of simple pendulum and mention formulae
7.0 Understand the concept of Heat and thermodynamics

7.1 Explain the concept of expansion of gases
7.2 State and explain Boyle‘s law and also express it in terms of density
7.3 Define absolute zero temperature
7.4 Explain absolute scale of temperature
7.5 State Charles laws in terms of absolute temperature and explain
7.6 Define ideal gas and distinguish from real gas
7.7 Derive Ideal gas equation
7.8 Define Specific gas constant and Universal gas constant
7.9 Explain why universal gas constant is same for all gases
7.10 State SI unit and dimensional formula of universal gas constant
7.11 Calculate the value of universal gas constant
7.12 State the gas equation in different forms ( as a function of density and mass)
7.13 Distinguish between r and R
7.14 State and Explain Isothermal process
7.15 State and Explain adiabatic process
7.16 Distinguish between isothermal and adiabatic processes
7.17 State first and second laws of thermodynamics and state applications
7.18 Define specific heats & molar specific heats of a gas and differentiate them
45
7.19 Derive the relation Cp – Cv = R (Mayer‘s Equation)
7.20 Solve t h e r e l a v e n t n u m e r i c a l problems
8.0 Understand the concept of Sound

8.1 Define the term sound
8.2 Explain longitudinal and transverse wave motion and state differences
8.3 Distinguish between musical sound and noise
8.4 Explain noise pollution and state SI unit for intensity level of sound
8.5 Explain causes of noise pollution
8.6 Explain effects of noise pollution
8.7 Explain methods of minimizing noise pollution
8.8 Explain the phenomenon of beats
8.9 State the applications of beats
8.10 Define Doppler effect
8.11 List the Applications of Doppler effect
8.12 Define reverberation and reverberation time
8.13 Write Sabine‘s formula and name the parameters contained
8.14 Define and Explain echoes and also state its applications
8.15 State conditions of good auditorium
9.0 Understand the properties of matter

9.1 Define the term Elasticity
9.2 Define the terms stress and strain and also define different types of stress and
strain
9.3 S t at e t h e uni t s a nd di m ens i on al fo rm u l a e fo r st re ss a nd st r ai n
9.4 State and explain Hooke‘s law
9.5 Define surface tension and state examples
9.6 Explain Surface tension with reference to molecular theory
9.7 Define angle of contact
9.8 Define capillarity
9.9 Write the formula for surface tension based on capillarity and name the
parameters
9.10 Explain the concept of Viscosity
9.11 Mention examples of Viscosity
9.12 State Newton‘s formula for viscous force and explain
9.13 Define co-efficient of viscosity and write its units and dimensional formula
9.14 Explain the effect of temperature on viscosity of liquids and gases
9.15 State Poiseulle‘s equation for Co-efficient of viscosity and name the physical
quantities involved
10.0 Understand the concept of Electricity and Magnetism

10.1 Explain the concept of Electricity
10.2 State Ohm‘s law a nd w ri t e t h e fo rm ul a
10.3 Explain Ohm‘s law
10.4 Define specific resistance, conductance and state their units
10.5 State Kirchoff‘s laws
10.6 Explain Kirchoff‘s laws
10.7 Describe Wheatstone‘s bridge with legible sketch
10.8 Derive an expression for balancing condition of Wheatstone‘s bridge
46
10.9 Describe Meter Bridge experiment for the determination of resistivity with a
neat circuit diagram
10.10 Write the formula in Meter Bridge to determine specific resistance
10.11 Explain the concept of magnetism
10.12 State the Coulomb‘s inverse square law of magnetism
10.13 Define magnetic field and magnetic lines of force and write the properties of
magnetic lines of force
10.14 State the Magnetic induction field strength and mention its units and
dimensional formula
10.15 Derive an expression for the moment of couple on a bar magnet placed in a uniform
magnetic field
10.16 Derive Magnetic induction field strength at a point on the axial line
10.17 Derive Magnetic induction field strength at a point on the equatorial line
11.0 Understand the concept of Modern physics

11.1 State and Explain Photo-electric effect
11.2 Write Einstein‗s photoelectric equation and explain
11.3 State laws of photoelectric effect
11.4 Explain the Working of photoelectric cell
11.5 List the Applications of photoelectric effect
11.6 Recapitulate refraction of light and its laws
11.7 Define critical angle
11.8 Explain the Total Internal Reflection
11.9 Explain the principle and working of Optical Fiber
11.10 Mention types of optical fibbers
11.11 List the applications of Optical Fiber
11.12 Define super conductor and superconductivity and mention examples for
superconductors
11.13 State the properties of superconducting materials
11.14 List the applications of superconductors
COURSE CONTENT:
1. Units and Dimensions:
Introduction – Physical quantity – Fundamental and Derived quantities –
Fundamental and Derived units- SI units –Multiples and Sub multiples – Rules for
writing S.I. units-Advantages of SI units – Dimensions and Dimensional
formulae- Dimensional constants and Dimensionless quantities- Principle of
Homogeneity- Advantages and limitations of Dimensional analysis- - Problems.
2. Elements of Vectors:
Scalars and Vectors –Types of vectors(Proper Vector, Null Vector, Unit Vector, Equal
, Negative Vector, Like Vectors, Co-Initial Vectors, Co-planar Vectors and Position
Vector).Addition of vectors- Representation of vectors- Resolution of vectors -
Parallelogram, Triangle and Polygon laws of vectors–Subtraction of vectors- Dot
and Cross products of vectors-Problems
3. Kinematics
Introduction- Concept of acceleration due to gravity- Equations of motion for a freely
falling body and for a body thrown up vertically- Projectiles- Horizontal and Oblique
projections- Expressions for maximum height, time of flight, range - problems
47
4. Friction:
Introduction to friction- Causes- Types of friction- Laws of friction- Angle of repose-
Angle of friction— Motion of a body over a horizontal surface- smooth inclined plane-
rough inclined plane- Advantages and disadvantages of friction- Methods of reducing
friction – Problems
5. Work, Power and Energy:
Work, Power and Energy- Definitions and explanation- potential energy- kinetic
energy-Derivations of Potential and Kinetic energies-K.E and Momentum relation -
Work-Energy theorem- Law of Conservation of energy- Problems
6. Simple Harmonic Motion:

Introduction-Conditions of SHM-Definition-Examples-Expressions for displacement,
velocity, acceleration, Time period, frequency and phase in SHM- Time period of a
simple pendulum- Laws of simple pendulum-seconds pendulum- Problems
7. Heat and Thermodynamics:

Expansion of Gases- Boyle‘s law- Absolute scale of temperature- Charles laws- Ideal
gas equation- Universal gas constant- Differences between r and R- Isothermal and
adiabatic processes- Laws of thermodynamics- Specific heats - molar specific heats
of a gas –Derivation of Mayer‘s Equation- Problems
8. Sound:
Sound- Nature of sound- Types of wave motion -musical sound and noise- Noise
pollution – Causes & effects- Methods of reducing noise pollution- Beats- Doppler
effect- Echo- Reverberation-Reverberation time-Sabine ‗s formula-Conditions of
good auditorium- Problems
9. Properties of matter
Definition of Elasticity –Definition of stress and strain -th e uni t s an d
di m ens i on al fo rm u l a e fo r st re ss a nd st r ai n - The Hooke‘s law- Definition of
surface tension-Explanation of Surface tension with reference to molecular theory -
Definition of angle of contact - Definition of capillarity -The formula for surface
tension based on capillarity - Explanation of concept of Viscosity - Examples for
surface tension and Viscosity - Newton‘s formula for viscous force- Definition of co-
efficient of viscosity- The effect of temperature on viscosity of liquids and gases -
Poiseuille‘s equation for Co-efficient of viscosity- Th e r e l a t e d n u m e r i c a l
problems
10. Electricity & Magnetism:

Ohm‘s law and explanation- Specific resistance- Kirchoff‘s laws-
Wheatstone‘s bridge - Meter bridge- Coulomb‘s inverse square law magnetic
field- magnetic lines of force-Magnetic induction field strength- magnetic induction
field strength at a point on the axial line - magnetic induction field strength at a point
on the equatorial line–problems.
11. Modern Physics;

Photoelectric effect –Einstein‘s photoelectric equation-laws of photoelectric effect -
photoelectric cell –Applications of photo electric effect- Total internal reflection-
fiber optics- -principle and working of an optical fiber-types of optical fibers -
Applications of optical fibers-superconductivity- applications
48
REFERENCE BOOKS:
1. Intermediate physics Volume-I & 2 Telugu Academy (English version)

2. Unified physics Volume 1, 2, 3 and 4 Dr.S.L Guptha and Sanjeev Guptha
3. Text book of physics Volume I Resnick & Holiday
4. Text book of applied physics Dhanpath Roy
5. Fibre optics D.A Hill
6. NCERT Text Books XI & XII Standard
Blue Print for setting question paper at different levels
S.No Major Topics No. of Weightage Short answer Essay type

Periods of Marks type
K U A K U A
1. Units and 08 03 1 0 0 0 0 0
Dimensions
2. Elements of Vectors 12 13 0 0 1 0 1 0
3. Kinematics 14 13 0 1 0 1 0 0
4. Friction 08 10 0 0 0 0 1 0
5. Work, Power and
12 10 0 0 0 0 1 0
Energy
6. Simple Harmonic 12 13 0 0 1 0 1 0
Motion
7. Heat & 12
13 0 1 0 1 0 0
Thermodynamics
8. Sound
12 13 0 1 0 0 0 1
9. Properties of Matter
10 06 1 1 0 0 0 0
10. Electricity &
12 13 0 1 0 1 0
magnetism 0
11. Modern Physics
08 03 1 0 0 0 0 0
Total: 120 110 3 5 2 2 5 1
2
49
ENGINEERINGCHEMISTRY &ENVIRONMENTALSTUDIES
Subject Title : Engineering Chemistry & Environmental Studies

Scheme of instruction and examination Time Schedule
S.No Major topic No of Weight Short type Essay type (10 remarks
Periods age of (3marks) marks)
marks R U A R U A
A. ENGINEERING CHEMISTRY
Fundamentals of
1 18 16 1 0 1 0 1 0
Chemistry
2 Solutions 10 8 1 0 0 0 0 1/2 5 mark
3 Acids and bases 10 8 0 0 1 0 1/2 0 5 mark
Principles of
4 10 10 0 0 0 1 0 0
Metallurgy
5 Electrochemistry 14 13 0 1 0 0 0 1
6 Corrosion 8 10 0 0 0 0 1 0
7 Water Technology 14 13 1 0 0 1 0 0
8 Polymers 12 13 1 0 0 1 0 0
9 Fuels 6 3 1 0 0 0 0 0
B.
18 16 1 1 0 0 1 0
ENVIRONMENTALSTUDIES
3 1
120 110 6 2 2 3
TOTAL 1/2 1/2
18 6 6 30 35 15
OBJECTIVES:
Upon completion of the course the student shall be able to,
A.ENGINEERING CHEMISTRY
1.0 Understand the concept of Atomic structure
1.1 Explain the charge and mass of fundamental particles of an atom (electron, proton and
neutron)
1.2 Explain the concept of atomic number and mass number.
1.3 State the Postulates of Bohr‘s atomic theory and its limitations.
1.4 Explain t he si gni fi ca nce of fou r Quantum numbers.
1.5 Explain 1. Aufbau principle, 2 Pauli‘s exclusion principle 3 Hund‘s rule.
1.6 Define Orbital in an atom.
1.7 Draw the shapes of s, p and d-Orbitals.
1.8 Distinguish between Orbit and Orbital
1.9 Write the electronic configuration of elements up to atomic number 30
1.10 Explain the significance of chemical bonding
1.11 Explain the Postulates of Electronic theory of valency
1.12 Define the t ypes of Chemical bonding viz., Ionic, Covalent bonds.
50
1.13 Explain the t ypes of Chemical bonding viz. Ionic, Covalent bonds with examples.
1.14 Explain bond formation in NaCl and MgO.
1.15 List Properties of Ionic compounds
1.16 Explain bond formation in Hydrogen molecule, Oxygen molecule, and Nitrogen
molecule using Lewis dot method.
1.17 List Properties of Covalent compounds
1.18 Distinguish between properties of ionic compounds and covalent compounds.
1.19 Structures of ionic solids-define a) Unit cell b) co-ordination number.
1.20 Structures of Unit cells of NaCl and CsCl.
1.21 Define the term. Oxidation number.
1.22 Calculate the Oxidation Number of underlined atoms in the following examples
a)KMnO4 b) K2Cr2O7 c) HNO3 d) H2SO4 e) ClO4- f) NH4+
1.23 Differentiate between Oxidation Number and Valency
2.0 Calculate Molarity and Normality of given Solution
2.1 Define the terms 1.Solution, 2.Soluteand 3.Solvent

2.2 Classify solutions based on physical state and solubility
2.3 Define mole
2.4 Problems on ‗Mole concept‘
2.5 Define the terms 1. Atomic weight, 2.Molecular weight and 3. Equivalent weight
2.6 Calculate Molecular weight and Equivalent weight of given Acids, (HCl, H2SO4,
HNO3), Bases (NaOH, KOH, Ca(OH)2) and Salts (NaCl, Na2CO3, CaCO3)
2.7 Define 1.Molarity, 2.Normality of solutions
2.8 Solve Numerical problems on Molarity and Normality
a) Calculate the Molarity or Normality if weight of solute and volume of solution are
given
b) Calculate the weight of solute if Molarity or normality with volume of solution are
given
c) Problems on dilution to convert high concentrated solutions to low concentrated
solutions
3.0 Understand the concepts of Acids and bases
3.1 Explain Arrhenius theory of Acids and Bases
3.2 State the limitations of Arrhenius theory of Acids and Bases
3.3 Explain Bronsted–Lowry theory of acids and bases
3.4 State the limitations of Bronsted–Lowry theory of acids and bases
3.5 Explain Lewis theory of acids and bases
3.6 State the limitations of Lewis theory of acids and bases
3.7 Explain the Ionic product of water
3.8 Define PH and explain Sorenson scale
3.9 Solve the Numerical problems on PH (Strong Acids and Bases)
3.10 Define Buffer solution
3.11 Gi ve at l east t hre e examples for Buffer solutions
3.12 State the applications of Buffer solution
4.0 Understand the Principles of Metallurgy
4.1 List at least eight Characteristics of Metals

4.2 Distinguish between Metals and Non Metals
4.3 Define the terms 1.Mineral, 2.Ore, 3. Gangue, 4.Fluxand 5.Slag
4.4 Describe the methods of concentration of Ore; 1.Handpicking, 2.Levigation, and 3. Froth
51
Floatation
4.5 Describe the methods involved in extraction of crude metal- Roasting, Calcination and
Smelting.
4.6 Explain the purification of Metals by Electrolytic Refining
4.7 Define an Alloy
4.8 Write the Composition o f t h e f o l l o w i n g a l l o y s : 1.Brass, 2 . Germansilver,
3. Nichrome
4.9 L i s t t h e uses of the following Alloys: 1. Brass, 2.Germansilver, 3.Nichrome
5.0 Understand the concepts of Electrochemistry
5.1 Define the terms1.Conductor, 2. Insulator, 3.Electrolyte 4.Non–electrolyte

5.2 Distinguish between metallic conduction and Electrolytic conduction
5.3 Explain electrolysis by taking example of used NaCl
5.4 Explain Faraday‘s laws of electrolysis
5.5 Define 1 . C hemical equivalent (E) 2 . E lectrochemicalequivalent (e) and their
relation.
5.6 Solve the Numerical problems based on Faraday‘s laws of electrolysis
5.7 Define Galvanic cell
5.8 Explain the construction and working of Galvanic cell
5.9 Distinguish between electrolytic cell and galvanic cell
5.10 Explain the electrode potentials and standard electrode potentials
5.11 Explain the electrochemical series and its significance
5.12 Explain the EMF of a cell.
5.13 Solve the numerical problems on EMF of the cell based on standard electrode
potentials.
6.0 Understand the concept of Corrosion
6.1 Define t h e t e r m corrosion
6.2 State the Factors influencing the rate of corrosion
6.3 Describe the formation of a) composition cell b) Stress cell c) Concentration cell
during corrosion.
6.4 Define rusting of iron and Explain the mechanism of rusting of iron.
6.5 Explain the methods of prevention of corrosion:
a) Protective coatings (anodic and cathodic coatings)
b) cathodic protection (Sacrificial anode process and Impressed–voltage process)
7. 0 Understand the concept of Water Technology

7.1 State the various Sources of water like Surface water and sub-surface water.
7.2 Define the terms soft water and hardwater with respect to soap consumption.
7.3 Define the term hardness o f w a t e r
7.4 T yp e s o f h a r d n e s s o f w a t e r 1 . T e m p o r a r y h a r d n e s s 2 . P e r m a n e n t
hardness
7.5 L i s t t h e s a l t s t h a t causing hardness of water (with Formulae)
7.6 State the disadvantages of using hard water in industries
7.7 Define Degree of hardness, units of hardness (mg/L) or PPM.
7.8 Explain the methods of softening of hardwater: a) Ion-Exchange process b) Permutit
process or Zeolite process
7.9 Concept of Osmosis and Reverse Osmosis with examples.
7.10 State the applications of Reverse Osmosis.
7.11 State essential qualities of drinking water.
8.0 Understand the concepts of Polymers
52
8.1 Explain the concept of polymerisation
8.2 Describe the methods of polymerization a) addition polymerization of Ethylene b)
condensation polymerization of phenol and formaldehyde (Only flow chart i.e.
without chemical equations)
8.3 Define the term plastic
8.4 Classify the plastics with examples
8.5 Distinguish between thermo and thermosetting plastics
8.6 List the Characteristics of plastics
8.7 State the advantages of plastics over traditional materials
8.8 State the disadvantages of using plastics.
8.9 Explain the methods of preparation of the following plastics:
1.Polythene, 2. PVC 3.Teflon, 4. Polystyrene and 5. Urea formaldehyde
8.10 Explain the uses of the following plastics:
1.Polythene, 2. PVC 3.Teflon 4.Polystyrene and 5. Urea formaldehyde
8.11 Define the term natural rubber
8.12 Write the structural formula of Natural rubber
8.13 Explain the processing of Natural rubber from latex
8.14 List the Characteristics of natural rubber
8.15 Explain the process of Vulcanization
8.16 List the Characteristics of Vulcanized rubber
8.17 Define the term Elastomer
8.18 Describe the preparation of the following synthetic rubbers a) Buna-s and b)
Neoprene rubber
8.19 List the uses of the following synthetic rubbers a) Buna-s and b) Neoprene rubber
9.0 Understand the concepts of Fuels

9.1 Define the term fuel
9.2 Classify the fuels based on physical state–solid, liquid and gaseous fuels,
9.3 Classify the fuels based on occurrence-primary and secondary fuels
9.4 List the characteristics of good fuel
9.5 State the composition and uses of gaseous fuels:
a) Water gas b) Producer gas c) Natural gas d) Coal gas e) Bio gas and f) Acetylene
B. ENVIRONMENTAL STUDIES
1.1 Define the term environment
1.2 Explain the scope and importance of environmental studies
1.3 Segments of environment 1) Lithosphere 2) Hydrosphere 3) Atmosphere 4)
Biosphere,
1.4 Define the following terms 1) Pollutant 2) Pollution 3) Contaminant 4) Receptor, 5)
sink 6) particulates 7) dissolved oxygen 8) Threshold limit value 9) BOD and 10)
COD 11) eco system.
1.5 State the renewable and non renewable energy sources with examples.
1.6 Define t h e t e r m s :
1 ) Producers 2 ) C o n s u m e r s and 3 ) D e c o m p o s e r s with examples.
1.7 Explain bio diversity and threats to bio diversity
1.8 Define air pollution
1.9 Classify the air pollutants-based on origin and physical state of matter.
1.10 Explain the causes of Air pollution.
1.11 Explain the effects of air pollution on human beings, plants and animals.
1.12 State the uses of forest resources.
1.13 State the deforestation and its causes and effects.
53
1.14 Explain the 1) Greenhouse effect 2) Ozone layer depletion and 3) Acid rain.
1.15 Explain the methods of control of Air pollution
1.16 Define Water pollution
1.17 Explain the causes of Water pollution
1.18 Explain the effects of Water pollution on living and Non-living things.
1.19 Explain the methods of control of Water pollution.
COURSE CONTENT
A. ENGINEERING CHEMISTRY
1. Fundamentals of Chemistry
Atomic Structure: Introduction - Fundamental particles – Bohr‘s theory – Quantum
numbers – Aufbau principle - Hund‘s rule - Pauli‘s exclusion Principle- Orbitals,
shapes of s, p and d orbitals - Electronic configurations of elements
Chemical Bonding: Introduction – types of chemical bonds – Ionic and covalent bond
with examples–Properties of Ionic and Covalent compounds- structures of ionic
crystals NaCl, CsCl.
Oxidation Number- calculations, differences between Oxidation Number and
Valency.
2. Solutions
Introduction-concentration methods – Mole concept, Molarity, Normality, Equivalent
weights, Numerical problems onMole, Molarity and Normality.
3. Acids and Bases
Introduction – Theories of acids and bases and limitations – Arrhenius theory-
Bronsted –Lowry theory – Lewis acid base theory – Ionic product of water– pH and
related numerical problems–Buffer solutions–Applications.
4. Principles of Metallurgy
Characteristics of Metals and distinction between Metals and Non Metals, Metallurgy,
ore, Gangue, Flux, Slag - Concentration of Ore –Hand picking, Levigation, Froth
floatation – Methods of Extraction of crude Metal – Roasting, Calcination, Smelting
– Alloys – Composition and uses of Brass, German silver and Nichrome
5. Electrochemistry
Conductors, insulators, electrolytes– electrolysis – Faraday‘s laws of electrolysis-
numerical problems – Galvanic cell – standard electrode potential – electrochemical
series–EMF and numerical problems on EMF of a cell
6. Water technology
Introduction–soft and hard water–causes of hardness–types of hardness
–disadvantages of hard water – degree of hardness (PPM) – softening methods –
permutit process – ion exchange process– drinking water –Osmosis, Reverse
Osmosis–Applications of Reverse osmosis
7. Introduction-factors influencing corrosion - composition, stress and concentration
cells–rusting of iron and its mechanism – prevention of corrosion by coating methods,
cathodic protection
8. Polymers
Introduction – polymerization – types of polymerization – addition, condensation
with examples – plastics – types of plastics – advantages of plastics over traditional
materials –Disadvantages of using plastics –
preparationandusesofthefollowingplastics:1.Polythene 2.PVC 3.Teflon 4.Polystyrene
5. Urea formaldehyde – Rubber – Natural rubber – processing from latex –
Vulcanization – Elastomers, Buna-s, Neoprene rubber and their uses.
9. Fuels
Definition and classification of fuels – characteristics of good fuel-composition and
54
uses of gaseous fuels.
B. ENVIRONMENTALSTUDIES
Introduction– environment –scope and importance of environmental studies important
terms– renewable and non-renewable energy sources–Concept of ecosystem,
producers, consumers and decomposers – Biodiversity, definition and threats to
Biodiversity.
Air pollution – causes-Effects– forest resources: uses and over exploitation,
deforestation, acid rain, greenhouse effect –ozone depletion – control of air pollution –
Water pollution – causes – effects – control measures,
REFERENCEBOOKS
1. Intermediate chemistry Vol 1&2 Telugu Academy

2. Intermediate chemistry Vol 1&2 Vikram Publishers
3. Intermediate chemistry Vol 1&2 Vignan Publishers &Deepthi Publishers
4. Engineering Chemistry Jain & Jain
5. Engineering Chemistry O.P. Agarwal, Hi-Tech.
6. Engineering Chemistry Sharma
7. Engineering Chemistry A.K. De
55
GENERAL GEOLOGY & PETROLEUM GEOLOGY
Subject title : GENERAL GEOLOGY & PETROLEUM GEOLOGY

Subject code : PET-105
Periods / week : 04
Periods / semester : 120
TIME SCHEDULE
Weightage
No. of
S.No. Major Topics of SAQ EAQ
Periods
marks
The Nature of Gas and Oil & The
1 15 13 1 1
Earth‘s crust – where we find it
Identification of common Rocks
2 20 16 2 1
and Minerals & Geological Time
Deformation of Sedimentary
3 Rocks & Sedimentary Rock 25 26 2 2
Distribution
Sandstone Reservoir Rocks &
4 20 16 2 1
Carbonate Reservoir Rocks
Geological Mapping & Ocean
5 15 13 1 1
Environment and plate tectonics
Source Rock, Generation,
6 Migration and Accumulation of 25 26 2 2
Petroleum & Petroleum Traps
Total Periods 120 110 10 08
OBJECTIVES:
After completion of the course, the student will be able to
Unit-1: The Nature of Gas and Oil & the Earth’s crust – where we find it
1.0 Know about Petroleum
1.1 Know about Chemical Rock Composition
1.2 Know about Crude Oil
1.3 Know about Natural Gas
1.4 Know about Reservoir Hydrocarbons
1.5 Know about Rocks and Mineral
1.6 Know about structure of Earth‘s crust
Unit-2: Identification of common Rocks and Minerals & Geological Time

2.0 Know about Minerals
2.1 Know about Identification of Rocks
2.2 Know about Rocks
2.3 Know about Radioactive Dating
2.4 Know about Relative Age dating
2.5 Know about The Geological Time scale
2.6 Know about Earth History
Unit-3: Deformation of Sedimentary Rocks & Sedimentary Rock Distribution

3.0 Know about Weathering
3.1 Know about Erosion
3.2 Know about unconformities
56
3.3 Know about Anticlines
3.4 Know about Synclines
3.5 Know about Sedimentary Rock distribution
3.6 Know about Basin formation
3.7 Know about Sedimentary rock Facies
3.8 Know about Subsurface Rock layers
Unit-4: Sandstone Reservoir Rocks & Carbonate Reservoir Rocks

4.0 Know about Sand stone Reservoir Rocks
4.1 Know about Dune sand stone
4.2 Know about Shoreline sand stones
4.3 Know about River sand stones
4.4 Know about Deltas sand stones
4.5 Know about Carbonate Reservoir Rocks
4.6 Know about Reefs
4.7 Know about Lime stone platforms
4.8 Know about Karsts limestone
4.9 Know about Chalk
4.10 Know about Dolomite
Unit-5: Geological Mapping & Ocean Environment and plate tectonics

5.0 Know about Mapping
5.1 Know about Topographic maps
5.2 Know about Geologic maps
5.3 Know about Base maps
5.4 Know about Subsurface maps
5.5 Know about Ocean Topography
5.6 Know about Earth‘s Interior
5.7 Know about Continental Drift
5.8 Know about Seafloor spreading
5.9 Know about Plate tectonics
5.10 Know about Middle East Oil Fields
Unit-6: Source Rock, Generation, Migration and Accumulation of Petroleum &

Petroleum Traps
6.0 Know about Source Rocks
6.1 Know about Generation
6.2 Know about Migration
6.3 Know about Accumulation
6.4 Know about Reservoir rocks
6.5 Know about Stratigraphic traps
6.6 Know about unconformities (secondary), reefs
6.7 Know about salt domes
COURSE CONTENT:
Unit-1: The Nature of Gas and Oil & The Earth’s crust – where we find it
Geology, Exploration, Drilling, Logging, Production – Petroleum – Chemical Rock
Composition – Carbon, Hydrogen, Sulfur, Nitrogen, Oxygen – Crude Oil – Hydrocarbon
Molecules, 0API, Benchmark crude oils, Pour point, color, crude streams, Measurement,
Refining – Natural Gas –Composition, Occurrence, Condensate, Measurement – Reservoir
57
Hydrocarbons – Rocks and Mineral – Types of Rocks – ligneous, Sedimentary, Metamorphic
– structure of Earth‘s crust-sea level cycles, Basement, Sedimentary rock basin .
Unit-2: Identification of common Rocks and Minerals & Geological Time

Color, Luster, Form, clearage, Hardness, Specific gravity, Taste – Minerals – Mica, Quartz,
calcite, Halite, Gypsum, Pyrite, Galena – Identification of Rocks – Texture, Mineral
compositions – Rocks – ligneous – Granite, Basalt – Metamorphic – gneiss – sedimentary –
conglomerate, sandstone – shale, limestone, coal, chert or flint – Radioactive dating – relative
age dating – fossil, microfossils – the geological time scale – earth history- Cenozoic,
Mesozoic, Paleozoic, Precambrian.
Unit-3: Deformation of Sedimentary Rocks & Sedimentary Rock Distribution

Weathering – Mechanical, Chemical – Erosion – Unconformities – Disconformity, Angular
unconformity – Anticlines synclines –Domes-Homoclines - Fractures - Joint faults -
Sedimentary rock distribution basin formation - Half Graben, Intermontane, Limestone
subsurface rock layers - Interfinger, Pinch.
Unit-4: Sandstone Reservoir Rocks & Carbonate Reservoir Rocks

Dune sandstone – Sand dunes, Crossbed – Shoreline sandstones Buttress sands - River
sandstones - Meander, Point bar sands, Braided river - Delta sandstones - Delta
Environments, Constructive delta, Destructive delta, Delta switching, Distributary switching -
Carbonate reservoir rocks - Reefs - Barrier Reef, Pinnacle reefs, Atoll reef - Lime stone
platforms - Rimmed platform - Karst Limestone - Chalk - Dolomite.
Unit-5: Geological Mapping & Ocean Environment and plate tectonics

Mapping -Topographic maps- contour line, contour internal -geologic maps formation strike,
dip, stratigraphic column, geological symbols -base maps -subsurface map -structural map,
isopach map, percentage map -ocean topography -shallow water, deep water, ocean
sediments -earth‘s interior -continental drift- seafloor spreading -subduction zones - plate
tectonics- Failed arm basins- Middle east oil fields.
Unit-6: Source Rock, Generation, Migration and Accumulation of Petroleum &

Petroleum Traps
Source rocks generation migration accumulation –age- reservoir rocks -porosity,
permeability, saturation- oil shales- tar sands- petroleum traps -spill point ,closure -structural
traps -anticlines and domes, growth faults, rollover anticline, drag folds- stratigraphic traps -
angular unconformities (secondary), reefs, compaction -Anticline (primary) combination
traps- ball head structures, salt domes.
REFERENCE BOOKS:
1. Non technical Guide to Petroleum Geology, Exploration, Drilling & Production, 2 nd
Edition by Nooman J.Hyne, Ph.D.
2. A Textbook of Geology by G.B.Mahapatra
3. Textbook of Geology by P.K.Mukerjee
58
BASIC MECHANICAL ENGINEERING
Subject Title : Basic Mechanical Engineering

Periods/ Week : 04
Periods /Semester : 120
TIME SCHEDULE
Weightage Short
No. of Essay
S.No Major Topics of answer
Periods type
Marks type
1 Measuring Instruments 15 13 1 1
2 Friction and Lubrication 18 16 2 1
3 I.C. Engines 20 21 2 11/2
4 Boilers 15 13 1 1
5 Simple Stresses and Strains 18 16 2 1
6 Geometrical properties of Sections 20 18 1 11/2
Fundamentals of Refrigeration and air
7 14 13 1 1
conditioning
Total 120 110 10 08
Objectives:
On completion of the study of the subject the student should be able to comprehend the following,
Mechanical Engineering
1.0 Know about Measuring Instruments.
1.1 Know about Measurement, types of measurement
1.2 Familiarize with the use of checking and measuring Instruments.
1.3 Line diagrams of different measuring tools.
1.4 Specific use of each Instrument
1.5 Least count of different measuring tools.
Differentiate measuring and checking Instruments.

2.0 Friction and Lubrication
2.1 To appreciate the existence of friction in elements of power transmission
2.2 Understand the concept of friction
2.3 Define co-efficient of friction
2.4 Define angle of friction
2.5 Explain different types of friction.
2.6 Explain the necessity of lubrication
2.7 Give the classification of lubrication
2.8 Explain the properties of good lubricant
2.9 State different methods of lubrication
2.10 Simple problems on friction.
3.0 I.C. Engine

3.1 Define Heat engine
3.2 Classify Heat engines.
3.3 Give examples for each type.
3.4 Summarize the advantages of I.C.Engines and E.C.Engines.
59
3.5 Give the classification of I.C.Engines.
3.6 Explain the working of 4 stroke petrol engine with a line diagram
3.7 Explain the working of 2 stroke petrol engine with a line diagram
3.8 Explain the working of a 4 stroke and 2 stroke diesel engine with a line diagram.
3.9 Compare two stroke engine with 4 stroke engine
3.10 Know about Indicated power, brake power and mechanical efficiency. (No
Derivations)
3.11 Solve simple problems.
4.0 Boilers
4.1 Define Boiler
4.2 Give the classification of Boiler
4.3 Differentiate fire tube and water tube boiler
4.4 Name different types of Boilers
4.5 Explain the construction and working of a simple Vertical Boiler with a line diagram
4.6 Explain Babcock and Wilcox boiler with a line diagram.
5.0 Simple Stresses and Strains

5.1. Define the strength, Mechanical properties of engineering materials, commonly used.
5.2 Identify the nature and effect of tensile, compressive and shear forces.
5.3 Define the terms stress, strain, module of elasticity, Poisson‘s ratio.
5.4 Draw typical stress Vs strain curve for a M.S. Specimen under tension indicating
salient points on it.
5.5 Mention the significance of Factor of Safety.
5.6 Compute stress and strain values in bodies of uniform section and of composite
section under the influence of normal stresses
5.7 Calculate thermal stresses, in bodies of uniform section and composite sections.
5.8 Write down the relation between elastic constant E, N, K & 1/m.
5.9 Compute changes in axial, lateral and volumetric dimensions of bodies of uniform
sections under the action of normal forces.
6.0 Understand the Geometric Properties of Sections
6.1 State the Geometric properties of machine members.

6.2 Locate the C.G. of a given composite section.
6.3 Explain the meaning of the term moment of Inertia.
6.4 State and prove the perpendicular and parallel axis theorem.
6.5 Calculate the moment of Inertia of any composite section.
6.6 Explain the term Radius of gyration.
7.0 Understand the various methods of Refrigeration.

7.1 Define refrigeration.
7.2 Know the history of refrigeration.
7.3 Know principles involved in different methods of refrigeration such as ice, dry, ice,
steam jet water refrigeration, liquid nitrogen refrigeration.
7.4 Express unit of refrigeration in Terms of ton of refrigeration.
7.5 Define coefficient of Performance.
7.6 Evaluate power required per ton of refrigeration.
7.7 Know the principle of open air refrigeration.
7.8 Analyze Carnot refrigeration Cycle.
7.9 Analyze Bell-Colomen air-cycle.
60
7.10 Know principle of closed air Refrigeration.
7.11 Compare open air system with closed air system.
Course content:
1. Measuring Instruments
Dividers:- Sizes and uses combination square, bevel protractor, universal level protractor,
sine bar, universal surface gauge. Engineer‘s parallels, slip gauges. Screws pitch gauge,
Vernier caliper, Vernier height gauge, outside micrometer and inside micrometer.
2. Friction and Lubrication
Friction in elements of power Transmission- concept of friction - co-efficient of friction-
angle of friction - different types of friction- lubrication - different methods of lubrication,
Simple problems on friction
3. I.C. Engine
Heat engines - examples for each type – advantages- classification of I.C.engines- 4 stroke
petrol engine- 2 stroke petrol engine - 4 stroke and 2 stroke diesel engines, Indicated power,
brake power and mechanical Efficiency, solve simple problems
4. Boilers
Classification of Boilers - fire tube and water tube boilers- construction and working of a
simple Vertical Boiler – Babcock and Wilcox boiler with a line diagram.
5. Simple Stress and Strains
Mechanical Properties of common Engineering materials, Types of Forces, Stress, Strain and
their nature., Significance of various points on stress – strain diagram,
Significance of factor of safety, Behaviour of M.S. Specimen subjected to tensile test.
Relation between Elastic constants, Calculation of Lateral and volumetric strain of uniform
sections subjected to normal forces, Temperature (Thermal) stresses.
6. Geometric Properties of Sections
Definition and explanation of centre of gravity of a laminar area, centre of Gravity of a body,
Centre Gravity of a square, rectangle, triangle, Semi-circle, hemisphere and trapezium
(formulae only without derivations), Centre of gravity of a composite section by analytical
method only (I-section,T-Section, L-Section and channel section), Moment of Inertia,
Definition and Explanation, Theorems of Moment of Inertia. i) Parallel axes theorem. ii)
Perpendicular axes theorem. Moment of Inertia for simple Geometrical Sections –
Rectangular, circular and triangular section only. Radius of Gyration. Calculation of Moment
of Inertia and Radius of Gyration of a) I – Section.b) Channel Section.c) T – Section.d) L –
Section (Equal & unequal lengths ) e) Built up Sections (Simple cases only)
7. Fundamentals of Refrigeration and Air Refrigeration
Introduction – Definition and meaning of refrigeration, methods of refrigeration – unit of
refrigeration – COP. Thermodynamic analysis of Refrigeration cycles, Carnot refrigeration
cycle – Air refrigeration cycle (Bell – Coloman) open air and closed air systems of
refrigeration( problems omitted ).
REFERENCE BOOKS:
1. Workshop Technology, Volume 1 by Raghu Vamsi.
2. Workshop Technology by HazraChowdary.
3. Thermal Engineering by R.S.Kurmi.
4. Heat Engines – Volume I&II by R.C.Patel.
5. Thermal Engineering I & II by Prakirappa
61
ENGINEERING DRAWING
Subject Title : Engineering Drawing

Periods/Week : 06
TIME SCHEDULE
Short Essay
No. of Weightage
S.No. Major Topics Answer type
Periods of marks
Questions Questions
1 Importance of Engineering Drawing 01 - - -
2 Engineering Drawing Instruments 05 - - -
3 Free hand lettering & Numbering 06 5 1 -
4 Dimensioning Practice 09 5 1 -
5 Geometrical Constructions 21 15 1 1
Projection of points, Lines, Planes &
6 21 10 - 1
Solids
7 Auxiliary views 06 5 1 -
8 Sectional views 27 10 - 1
9 Orthographic Projection 33 10 - 1
10 Pictorial drawing 30 10 - 1
11 Development of surfaces 21 10 - 1
Total 180 80 04 06
The course is aimed at developing basic graphic skills so as to enable them to use these skills
in preparation of engineering drawings, their reading and interpretation
OBJECTIVES
Upon completion of the subject the student shall be able to,
1) Understand the basic concepts of Engineering Drawing

a) State the importance of drawing as an engineering communication medium
b) State the necessity of B.I.S. Code of practice for Engineering Drawing
c) Explain the linkages between Engineering drawing and other subjects of study in
diploma course
2) Use of Engineering Drawing Instruments
a) Select the correct instruments and draw lines of different orientation
b) Select the correct instruments and draw small and large Circles
c) Select the correct instruments for measuring distances on the drawing
d) Use correct grade of pencil for different types of lines, thickness and given function
e) Select and use appropriate scales for a given application
f) Identify different drawing sheet sizes as per I.S. and Standard Layouts
g) Prepare Title block as per B.I.S. Specifications
h) Identify the steps to be taken to keep the drawing clean and tidy
3) Write Free Hand Lettering and Numbers
62
a) Write titles using slanting letters and numerals of 7mm, 10mm and 14mm height
b) Write titles using vertical letters and numerals of 7mm, 10mm and 14mm height
c) Select suitable sizes of lettering for different layouts and applications
4) Understand Dimensioning Practice
a) Define ―Dimensioning‖
b) State the need of dimensioning the drawing according to accepted standards
c) Identify notations of Dimensioning used in dimensioned drawing
d) Identify the system of placement of dimensions in the given dimensioned drawing
e) Dimension a given drawing using standard notations and desired system of
dimensioning
f) Dimension standard features applying necessary rules
g) Arrange dimensions in a desired method for a given drawing
h) Identify the departures if any made in the given dimensioned drawing with reference
to SP-46-1988, and dimension the same correctly
5) Apply Principles of Geometric Constructions
a) Divide a given line into desired number of equal parts internally
b) Draw tangent lines and arcs
c) Use General method to construct any polygon
d) Explain the importance of conics
e) Construct ellipse by concentric circles method
f) Construct parabola by rectangle method
g) Construct rectangular hyperbola from the given data
h) Construct involute from the given data
i) Construct cycloid and helix from the given data
j) State the applications of the above constructions in engineering practice
6) Apply Principles of Projection of points, lines, planes & solids
a) Visualize the objects
b) Explain the I-angle and III-angle projections
c) Practice the I-angle projections
d) Draw the projection of a point with respect to reference planes (HP&VP)
e) Draw the projections of straight lines with respect to two reference planes (cases of
lines parallel to one plane and inclined to other plane only)
f) Draw the projections of planes (cases of planes perpendicular to one plane and
inclined to other plane only)
g) Draw the projections of solids (cases of axis perpendicular to one plane and inclined
to other plane only)
7) Understand the need of auxiliary views
a) State the need of Auxiliary views for a given engineering drawing
b) Draw the auxiliary views of a given engineering component
c) Differentiate between auxiliary view and apparent view
8) Appreciate the need of Sectional Views
a) Explain the need to draw sectional views
b) Select the section plane for a given component to reveal maximum
information
c) Explain the positions of section plane with respect to reference planes
d) Differentiate between true shape and apparent shape of section
e) Draw sectional views and true sections of regular solids discussed in chapter-6 above
f) Apply principles of hatching
9) Apply principles of orthographic projection
a) Explain the principles of orthographic projection with simple sketches
b) Draw the orthographic view of an object from its pictorial drawing
63
c) Draw the minimum number of views needed to represent a given object fully
10) Prepare pictorial drawings
a) State the need of pictorial drawings
b) Differentiate between isometric scale and true scale
c) Prepare Isometric views for the given orthographic drawings
11) Interpret Development of surfaces of different solids
a) State the need for preparing development drawing
b) Prepare development of simple engineering objects (cubes, prisms, cylinders, cones,
pyramids) using parallel line and radial line methods
c) Prepare development of surface of engineering components like trays, funnels, 900
elbows & rectangular ducts
COURSE CONTENT:
NOTE
1) B.I.S Specifications should invariably be followed in all the topics.
2) A-3 Size Drawing Sheets are to be used for all Drawing Practice Exercises.
3) First Angle Projection is to be followed for all Orthographic projection exercises
1) The importance of Engineering Drawing
Explanation of the scope and objectives of the subject of Engineering Drawing, Its
importance as a graphic communication -Need for preparing drawing as per standards –
SP-46–1988 – Mention B.I.S - Role of drawing in engineering education – Link between
Engineering drawing and other subjects of study
2) Engineering drawing Instruments
Classification: Basic tools, tools for drawing straight lines, tools for curved lines, tools for
measuring distances and special tools like mini drafter & drafting machine – Mention the
names under each classification and their brief description -Scales: Recommended scales
reduced & enlarged scales-Lines: Types of lines, selection of line thickness - Selection of
Pencils -Sheet Sizes: A0, A1, A2, A3, A4, A5, Layout of drawing sheets in respect of A0,
A1, A3 sizes, Sizes of the Title block and its contents - Care and maintenance of Drawing
Sheet
Drawing Plate 1: Consisting of two exercises on use of drawing instruments
3) Free hand lettering & numbering
Importance of lettering – Types of lettering -Guide Lines for Lettering- Practicing letters
& numbers of given sizes (7mm, 10mm and 14mm) Advantages of single stroke or
simple style of lettering
Drawing plate 2: Consisting of five to six exercises on freehand Lettering & Numbering
4) Dimensioning practice
Purpose of engineering Drawing, Need of B.I.S code in dimensioning -Shape description

of an Engineering object - Dimensioning size, Location features, surface finish, fully
dimensioned Drawing - Notations or tools of dimensioning, dimension line, extension
line, leader line, arrows, symbols, number and notes, rules to be observed in the use of
64
above tools - Placing dimensions: Aligned system and unidirectional system ( SP-46-
1988) - Arrangement of dimensions: Chain, parallel, combined, progressive, and
dimensioning by co-ordinate methods - The rules for dimensioning standard features
Circles (holes) arcs, angles, tapers, chamfers, and dimensioning of narrow spaces
Drawing Plate 3: Consisting of 8 exercises on Dimensioning methods and rules
5) Geometric Constructions
Division of a line: to divide a straight line into given number of equal parts internally and
it‘s examples in engineering applications. Construction of tangent lines: to draw tangent
lines touching circles internally and externally. Construction of tangent arcs i) To draw
tangent arc of given radius to touch two lines inclined at given angle (acute, right and
obtuse angles) ii) Tangent arc of given radius touching a circle or an arc and a given line
iii) Tangent arcs of radius R, touching two given circles internally and externally
Construction of polygon: Construction of any regular polygon of given side using general
method. Conical Curves: Explanation of Ellipse, Parabola, Hyperbola, as sections of a
double cone and loci of a moving point, Eccentricity of above curves – Their Engg.
applications viz. Projectiles, reflectors, P-V Diagram of a Hyperbolic process -
Construction of ellipse by concentric circles method - Construction of parabola by
rectangle method - Construction of rectangular hyperbola - General Curves: Involute,
Cycloid and Helix, explanations as locus of a moving point, their engineering
applications, viz, Gear tooth profile, screw threads, springs etc. - their construction.
Drawing Plate 4: Consisting of eight exercises on construction of polygons

Drawing Plate 5: Consisting of eight exercises on construction of conics
Drawing Plate 6: Consisting of eight exercises on involute, cycloid and helix
6) Projection of points, lines, planes & solids
Projecting a point on two planes of projection -Projecting a point on three planes of

projection -Projection of straight line i) Parallel to both the planes ii) Perpendicular to one
of the planes iii) Inclined to one plane and parallel to other plane - Projection of regular
planes- i) Plane perpendicular to HP and parallel to VP and vice versa ii) Plane
perpendicular to HP and inclined to VP and vice versa - Projection of regular solids with
i) Axis perpendicular to one of the planes ii) Axis parallel to VP and inclined to HP and
vice versa
Drawing Plate 7: Consisting of eight exercises on projection of points and Lines

Drawing Plate 8: Consisting of eight exercises on projection of planes
Drawing Plate 9: Consisting of eight exercises on projection of solids
7) Auxiliary views
Need for drawing auxiliary views - Explanation of the basic principles of drawing
auxiliary views, explanation of reference plane and auxiliary plane - Partial auxiliary
view.
Drawing plate 10: Consisting of four exercises on auxiliary views
8) Sectional views
65
Need for drawing sectional views – what is a sectional view - Location of cutting plane –
Purpose of cutting plane line – Selection of cutting plane to give maximum information
(vertical and offset planes) - Hatching – Section of regular solids inclined to one plane
and parallel to other plane
Drawing Plate 11: Consisting of six exercises on sections of solids
9) Orthographic Projections
Meaning of orthographic projection -Using a viewing box model – Number of views

obtained on the six faces of the box, - Legible sketches of only 3 views for describing
object - Concept of front view, top view, and side view, sketching these views for
number of engineering objects - Explanation of first angle projection. – Positioning of
three views in First angle projection - Projection of points as a means of locating the
corners of the surfaces of an object – Use of mitre line in drawing a third view when other
two views are given - Method of representing hidden lines - Selection of minimum
number of views to describe an object fully
Drawing Plate 12: Consisting of 12 exercises on orthographic projections of engineering

objects
10) Pictorial Drawings
Brief description of different types of pictorial drawing viz., Isometric, oblique, and
perspective and their use - Isometric drawings: Iso axis, angle between them, meaning of
visual distortion in dimensions - Need for an isometric scale, difference between
Isometric scale, and ordinary scale- difference between Isometric view and Isometric
projection - Isometric and Non-isometric lines -Isometric drawing of common features
like rectangles, circular shapes, non-isometric lines - Use of box and offset methods
Drawing plate 13: Consisting of 12 exercises on Isometric views of engineering objects
11) Development of Surfaces
Need for preparing development of surface with reference to sheet metal work -Concept
of true length of a line with reference to its orthographic projection when the line is (i)
parallel to the plane of projection (ii) inclined to one principal plane and parallel to the
other -Development of simple solids like cubes, prisms, cylinders, cones, pyramids -
Types of development: Parallel line and radial line development -Procedure of drawing
development - drawings of trays, funnels, 900 elbow pipes and rectangular ducts.
Drawing plate 14: Consisting of 5 exercises on development problems
REFERENCE BOOKS
Engineering Graphics by P I Varghese – ( McGraw-hill)

Engineering Drawing by Basant Agarwal & C.M Agarwal - ( McGraw-hill)
Engineering Drawing by N.D.Bhatt.
T.S.M. & S.S.M on ―Technical Drawing‖ prepared by T.T.T.I., Madras.
SP-46-1998 – Bureau of Indian Standards.
66
GENERAL GEOLOGY & PETROLEUM GEOLOGY LABORATORY
Subject title : General Geology & Petroleum Geology laboratory

Periods / week : 03
Total periods / Year : 90
List of experiments:
1. Identification of Rocks and minerals
2. Measurement of Strike, Dip, Apparent Thickness & True thickness of out crops.
3. Preparation of Topographic maps from given outcrops/ contours.
4. Preparation of Geological maps from given outcrops/ contours.
5. Preparation of Base maps from given outcrops/ contours.
6. Preparation of Surface maps from given outcrops/ contours.
67
PHYSICS LABORATORY
Subject Title : Physics Laboratory

Subject Code : PET -109
TIME SCHEDULE
No. of
S.No Name of the Experiment
Periods
1. Hands on practice on Vernier Calipers 03
2. Hands on practice on Screw gauge 03
3. Verification of Parallelogram law of forces and Triangle law of forces 03
4. Simple pendulum 03
5. Velocity of sound in air – (Resonance method) 03
6. Focal length and Focal power of convex lens (Separate & Combination) 03
7. Refractive index of solid using traveling microscope 03
8. Surface tension of liquid using traveling microscope 03
9. Coefficient of viscosity by capillary method 03
10. Boyle‘s law verification 03
11. Meter bridge 03
12. Mapping of magnet lines of force 03
Revision 06
Test 03
Total: 45
Objectives:
Upon completion of the course the student shall be able to
1.0 Practice with Vernier calipers to determine the volumes and areas of a cylinder and
sphere and their comparison etc.
2.0 Practice with Screw gauge to determine thickness of a glass plate, cross sectional area
of a wire and volumes of sphere and also their comparison etc
3.0 Verify the parallelogram law and Triangle law
4.0 Determine the value of acceleration due to gravity using Simple Pendulum
5.0 Determine the velocity of sound in air at room temperature and its value at zero degree
centigrade
6.0 Calculate the Focal length and focal power of convex lenses using distant object
method, U-V method, U-V graph and 1 / U – 1 / V graph methods and their
comparison,
7.0 Determine the refractive index of a solid using travelling microscope
8.0 Determine the surface tension of a liquid using travelling microscope
9.0 Determine the viscosity of a liquid using capillary method
10.0 Verify the Boyle‘s law employing a Quill tube
11.0 Determine the specific resistance of material of a wire using Meter Bridge
12.0 Drawing magnetic lines of force under N-S and N-N methods and locate null points
68
Competencies and Key competencies to be achieved by the student
Name of the Experiment
Competencies Key competencies
(No of Periods)
1. Hands on practice on Vernier  Find the Least count  Read the scales
Calipers(03)  Fix the specimen in posit  Calculate the requisite
 Read the scales physical quantities of
 Calculate the physical given objects
quantities of given object
2. Hands on practice on Screw  Find the Least count  Read the scales
gauge(03)  Fix the specimen in posit  Calculate thickness of
 Read the scales given glass plate
 Calculate thickness of  Calculate cross section of
glass place and cross wire and other quantities
section of wire and other
quantities
3. Verification of Parallelogram law  Fix suitable weights  Find the angle at

of forces and Triangle law of  Note the positions of equilibrium point
forces(03) threads on drawing sheet  Constructing
 Find the angle at parallelogram
equilibrium point  Construct triangle
 Construct parallelogram  Compare the ratios of
 Compare the measured force and length
diagonal
 Construct triangle
 Find the length of sides
 Compare the ratios
4. Simple pendulum(03)  Fix the simple pendulum  Find the time for number
to the stand of oscillations
 Adjust the length of  Find the time period
pendulum  Calculate the acceleration
 Find the time for number due to gravity
of oscillations  Draw l-T and l-T2 graph
 Find the time period
 Calculate the acceleration
due to gravity
 Draw l-T and l-T2 graph
5. Velocity of sound in air  Adjust the reservoir

–Resonance method (03)  Arrange the resonance level
apparatus  Find the first and second
 Adjust the reservoir level resonanting lengths
for booming sound  Calculate velocity of
 Find the first and second sound at room
resonanting lengths temperature
 Calculate velocity of  Calculate velocity of
sound sound at 00 C
69
(Periods)
6. Focal length and Focal power of  Calculate the focal
convex lens (Separate &  Fix the object distance length and power of
Combination) (03)  Find the Image distance convex lens
 Calculate the focal length  Draw u-v and 1/u – 1/v
and power of convex lens graphs
and combination of
convex lenses
 Draw u-v and 1/u – 1/v
graphs
7. Refractive index of solid using  Find the least count of  Read the scale
traveling microscope(03) vernier on microscope  Calculate the refractive
 Place the graph paper index of glass slab
below microscope
 Read the scale
 Calculate the refractive
index of glass slab
8. Surface tension of liquid using  Find the least count of  Read the scale
traveling microscope(03) vernier on microscope  Calculate height of
 Focus the microscope to liquid rise
the lower meniscus &  Calculate the surface
bent pin tension of water
 Read the scale
 Calculate height of liquid
rise
 Calculate the surface
tension of water
9. Coefficient of viscosity by capillary  Find the least count of  Find the pressure head
method(03) vernier  Calculate rate of volume
 Fix the capillary tube to of liquid collected
aspiratory bottle  Find the radius of
 Find the mass of capillary tube
collected water  Calculate the viscosity
 Find the pressure head of water
 Calculate rate of volume
of liquid collected
 Find the radius of
capillary tube
 Calculate the viscosity of
water using capillary
method
70
Name of the Experiment Competencies Key competencies
10. Boyle‘s law verification (03)  Find the length of air
 Note the atmospheric column
pressure  Find the pressure of
 Fix the quill tube to retort enclosed air
stand  Find the value P x l
 Find the length of air
column
 Find the pressure of
enclosed air
 Find and compare the
calculated value P x l
11. Meter bridge(03)  Make the circuit  Find the balancing
connections length
 Find the balancing length  Calculate unknown
 Calculate unknown resistance
resistance  Calculate the specific
 Find the radius of wire resistance
 Calculate the specific
resistance
12. Mapping of magnet lines of  Draw magnetic
force(03) meridian  Draw magnetic lines
 Placed the bar magnet of
in NN and NS force
directions  Locate the neutral
 Draw magnetic lines points
of force along equatorial and
 Locate the neutral axial lines
points along
equatorial and axial
lines
71
CHEMISTRY LABORATORY
Subject Title : Chemistry Laboratory

TIME SCHEDULE
S.No Name of the Experiment No. of Periods
1. Familiarization of methods for Volumetric analysis 03
2. Preparation of Std Na2 CO3 and making solutions of different dilution 03
Estimation of HCl solution using Std. Na2 CO3 solution
3. solution. 03
4. Estimation of NaOH using Std. HCl solution 03
5. Estimation of H 2 SO 4 using Std. NaOH solution 03
6. Estimation of Mohr‘s Salt using Std. KMnO4 03
7. Determination of acidity of water sample 03
8. Determination of alkalinity of water sample 03
9. Determination of total hardness of water using Std. EDTA solution 03
10. Estimation of Chlorides present in water sample 03
11. Estimation of Dissolved Oxygen (D.O) in water sample 03
12. Determination of pH using pH meter 03
13. Determination of conductivity of water and adjusting ionic strength 03
required level.
14. Determination 03
of turbidity of water
15. Estimation of total solids present in water sample 03
Total: 45
Objectives:
Upon completion of the course the student shall be able to,
1.0 Practice volumetric measurements (using pipettes, measuring jars, volumetric flask,
burettes) and gravimetric measurements (using different types of balances), making
dilutions, etc.
2.0 Practice making standard solutions with pre weighed salts and to make solutions of
desired dilutions using appropriate techniques.
3.0 Conduct titrations adopting standard procedures and using Std. Na2 CO3 solution for
estimation of HCl
4.0 Conduct titrations adopting standard procedures and using Std. HCl solution for
estimation of NaOH
5.0 Conduct titrations adopting standard procedures and using Std. NaOH solution for
estimation of H 2 SO 4
6.0 Conduct titrations adopting standard procedures and using Std. KMnO4 solution for
estimation of Mohr‘s Salt
7.0 Conduct titrations adopting standard procedures to determine the acidity of given
samples of water (One ground water and one surface / tap water, and rain water if
available)
72
8.0 Conduct titrations adopting standard procedures to determine the alkalinity of given
samples of water (One ground water and one surface / tap water)
9.0 Conduct titrations adopting standard procedures to determine the total hardness of
given samples of water (One ground water and one surface / tap water) using Std.
EDTA solution
10.0 Conduct titrations adopting standard procedures to determine the chlorides present in
the given samples of water and wastewater (One ground water and one surface / tap
water)
11.0 Conduct the test using titrometric / electrometric method to determine Dissolved
Oxygen (D.O) in given water samples (One sample from closed container and one
from open container / tap water)
12.0 Conduct the test on given samples of water / solutions (like soft drinks, sewage, etc.)
to determine their pH using standard pH meter
13.0 Conduct the test on given samples of water / solutions
a) To determine conductivity
b) To adjust the ionic strength of the sample to the desired value
14.0 Conduct the test on given samples of solutions (coloured and non coloured) to
determine their turbidity in NTU
15.0 Conduct titrations adopting standard procedures to determine the total solids present
in given samples of water (One ground water and one surface / tap water)
73
Competencies and Key competencies to be achieved by the student

(No of Periods)
Familiarization of methods for
Volumetric analysis (03) -- --
 Weighing the salt to the  Weighing the salt to the

accuracy of .01 mg accuracy of .01 mg
Preparation of Std Na2 CO3 and  Measuring the water with  Measuring the water with
making solutions of different volumetric flask, measuring volumetric flask, measuring
dilution (03) jar, volumetric pipette and jar, volumetric pipette and
graduated pipette graduated pipette
 Making appropriate dilutions  Making appropriate dilutions

(No of Periods)
Estimation of HCl solution

using Std. Na2 CO3 solution
(03)
 Cleaning the glassware and
Estimation of NaOH using Std. rinsing with appropriate
HCl solution (03)
solutions
Estimation of H 2 SO 4 using Std.  Making standard solutions  Making standard solutions
NaOH solution (03)
 Measuring accurately the  Measuring accurately the
Estimation of Mohr‘s Salt using standard solutions and titrants
Std. KMnO4 (03) standard solutions and
 Filling the burette with titrant titrants
Determination of acidity of
 Fixing the burette to the stand  Effectively Controlling the
water sample (03)
 Effectively Controlling the flow flow of the titrant
Determination of alkalinity of
water sample (03) of the titrant  Identifying the end point
 Identifying the end point  Making accurate
Determination of total hardness
of water using Std. EDTA  Making accurate observations observations
solution (03)  Calculating the results
Estimation of Chlorides present

in water sample (03)
Estimation of Dissolved Oxygen

(D.O) in water sample (By
titration method) (03)
 Familiarize with  Prepare standard

Estimation of Dissolved Oxygen
instrument solutions / buffers, etc.
(D.O) in water sample (By
 Choose appropriate  Standardize the
electrometric method) (03)
‗Mode‘ / ‗Unit‘ instrument with
74
 Prepare standard appropriate standard
Determination of pH using pH solutions / buffers, etc. solutions
meter (03)  Standardize the  Plot the standard curve
instrument with  Make measurements
Determination of conductivity of appropriate standard accurately
water and adjusting ionic solutions
strength to required level (03)  Plot the standard curve
 Make measurements
accurately
Determination of turbidity of
 Follow Safety precautions
water (03)

(No of Periods)
 Measuring the accurate

volume and weight of  Measuring the accurate
sample volume and weight of
 Filtering and air drying sample
without losing any filtrate  Filtering and air drying
Estimation of total solids
 Accurately weighing the without losing any
present in water sample (03)
filter paper, crucible and filtrate
filtrate  Accurately weighing the
 Drying the crucible in an filter paper, crucible and
oven filtrate
75
COMPUTER FUNDEMENTALS LABORATORY
Subject Title : Computer Fundamentals Laboratory
Periods/Week : 03
Periods/Year : 90
TIME SCHEDULE
No. of sessions
No. of
S. No. Major Topics each of 3 periods
Periods
duration
I. Computer hardware Basics 02 06
II. Windows Operating System 02 06
III. MS Word 08 24
IV. MS Excel 09 27
V. MS PowerPoint 09 27
Total 30 90
Rationale: The knowledge of Computer usage has become a must for everyone, due to wide
spread computer usage and related applications in all fields. This laboratory is designed to
give the students hands on practice of Windows Operating System and MS Office to enable
the students to use these skills in future courses.
I. Computer Hardware Basics (Not for end examination)

1. a) To familiarize with a Computer System and its hardware connections.
b) To start and Shutdown a Computer correctly.
c) To check the software details of the computer
d) To practice Internal and External DOS commands
2. To check the hardware present in your computer.
II. Windows’s operating system (Not for end examination)
3. To explore Windows Desktop
4. Working with Files and Folders
5. Windows Accessories: Calculator – Notepad – WordPad – MS Paint
III. Practice with MS-WORD
6. To familiarize with Ribbon layout of MS Word
Home - Insert - Page layout – References – Review - View
7. To practice Word Processing Basics
8. To practice Formatting techniques
9. To insert a table of required number of rows and columns
10. To insert Objects, Clipart and Hyperlinks
11. To use Mail Merge feature of MS Word
12. To use Equations and symbols features
IV. Practice with MS-EXCEL
13. To familiarize with MS-EXCEL layout
14. To access and Enter data in the cells
15. To edit a spread sheet- Copy, Cut, Paste, and selecting Cells
16. To use built in functions and Formatting Data
76
17. To create Excel Functions, Filling Cells
18. To enter a Formula for automatic calculations
19. To practice Excel Graphs and Charts
20. To format a Worksheet in Excel, Page Setup and Print
V. Practice with MS-POWERPOINT
21. To familiarize with Ribbon layout features of PowerPoint 2007.
22. To create a simple PowerPoint Presentation
23. To set up a Master Slide in PowerPoint
24. To insert Text and Objects
25. To insert a Flow Charts
26. To insert a Table
27. To insert a Charts/Graphs
28. To insert video and audio
29. To practice Animating text and objects
30. To Review presentation
77
Competencies and Key Competencies to be achieved by the students
Exp
Name of the Experiment Competencies Key Competencies
No.
1 (a). To familiarize with Computer a. Identify the Parts of a Computer Connect cables to external
system and hardware system a). CPU b) Monitor c) hardware and operate the
connections CD/DVD Drive d) Power Switch computer
e) Start Button f) Reset Button
b. Identify and connect various
peripherals
c. Identify and connect the cables
used with computer system
d. Identify various ports on CPU
and connect Keyboard & Mouse
1 (b). To Start and Shut down a. Log in using the password a. Login and logout as per the
Computer correctly b. Start and shut down the standard procedure
computer b. Operate mouse &
c. Use Mouse and Keyboard Keyboard
1 (c). To explore Windows Desktop a. Familiarize with Start Menu, a. Access application
Taskbar, Icons and Shortcuts programs using Start menu
b. Access application programs b. Use taskbar and Task
using Start menu, Task manager manager
c. Use Help support
1(d). To practice Internal and External a. Practice Internal commands Familiarize with MS-DOS
DOS commands b. Practice External commands Commands
2. To check the software details of c. Find the details of Operating Access the properties of
the computer System being used computer and find the
d. Find the details of Service details
Pack installed
3. To check the hardware present in a. Find the CPU name and clock a. Access device manager
your computer speed and find the details
b. Find the details of RAM and b. Type /Navigate the correct
Hard disk present path and Select icon
c. Access Device manager using related to the details
Control Panel and check the required
status of devices like mouse and
key board
d. Use My Computer to check the
details of Hard Disk Drives and
partitions
e. Use the Taskbar
4. Working with Files and Folders a. Create folders and organizing a. Create files and folders
files in different folders rename , arrange and
b. Use copy / paste or move search for the required
commands to organize files and folder/file
folders
78
Exp
No.
c. Arrange icons – name wise, size, b. Restore deleted files from

type, Modified Recycle bin
Working with Files and Folders d. Search a file or folder and find
its path
Continued.... e. Create shortcut for files and
folders (in other folders) on
Desktop
f. Familiarize with the use of My
Documents
g. Familiarize with the use of
Recycle Bin
To use Windows Accessories: a. Familiarize with the use of a. Use windows accessories
5. Calculator and select correct text
Calculator – Notepad – WordPad b. Access Calculator using Run editor based on the
– MS Paint command situation.
c. Create Text Files using Notepad b. Use MS Paint to create
and WordPad and observe the /Edit pictures and save in
difference in file size the required format.
d. Use MS paint and create .jpeg,
.bmp files using MS Paint
6. To familiarize with Ribbon layout a. Create/Open a document a. Create a Document and
of MS Word. – Home – Insert- b. Use Save and Save as features name appropriately and
Page Layout- References- c. Work on two documents save
simultaneously b. Set paper size and print
Review-View
d. Choose correct Paper size and options
Printing options
7. To practice Word Processing a. Typing text a. Use keyboard and mouse
Basics b. Keyboard usage to enter/edit text in the
c. Use mouse (Left click / Right document.
click / Scroll) b. Use shortcuts
d. Use Keyboard shortcuts c. Use spell check/ Grammar
e. Use Find and Replace features features for auto
in MS- word corrections.
f. Use Undo and Redo Features
g. Use spell check to correct
Spellings and Grammar
8. To practice Formatting a. Formatting Text a. Format Text and
techniques b. Formatting Paragraphs paragraphs and use
c. Setting Tabs various text styles.
d. Formatting Pages b. Use bullets and numbers to
e. The Styles of Word create lists
f. Insert bullets and numbers c. Use Templates /Themes
g. Themes and Templates d. Insert page numbers date,
h. Insert page numbers, header headers and footers
and footer
79
Exp
No.
9. To insert a table of required a. Edit the table by adding the a. Insert table in the word
number of rows and columns fields – Deleting rows and document and edit
columns –inserting sub table – b. Use sort option for
marking borders. Merging and arranging data.
splitting of cells in a Table
b. Changing the background colour
of the table
c. Use table design tools
d. Use auto fit – fixed row/ column
height/length – Even distribution
of rows / columns features
e. Convert Text to table and Table
to Text
f. Use Sort feature of the Table to
arrange data in
ascending/descending order
10. To Insert objects, clipart and a. Create a 2-page document. a. Insert hyperlinks
Hyperlinks &Insert hyperlinks and &Bookmarks
Bookmarks. b. Create organization
b. Create an organization chart charts/flow charts
c. Practice examples like preparing
an Examination schedule notice
with a hyperlink to Exam
schedule table.
11. To Use Mail merge feature of MS a. Use mail merge to prepare Use Mail merge feature
Word individually addressed letters
b. Use mail merge to print
envelopes.
12. To use Equations and symbols a. Explore various symbols Enter Mathematical symbols
features. available in MS Word and Equations in the word
b. Insert a symbol in the text document
c. Insert mathematical equations in
the document
13. To Practice with MS-EXCEL a. Open /create an MS Excel a. Familiarize with excel
spreadsheet and familiarize with layout and use
MS Excel 2007 layout like MS b. Use various features
office Button- available in toolbar
b. Use Quick Access Toolbar- Title
Bar- Ribbon-Worksheets-
Formula Bar-Status Bar
14. To access and Enter data in the a. Move around a Worksheet- a. Access and select the
cells Quick access -Select Cells required cells by various
b. Enter Data-Edit a Cell-Wrap addressing methods
Text-Delete a Cell Entry-Save a b. Enter data and edit
File-Close Excel
80
Exp
No.
15. To edit spread sheet Copy, Cut, a. Insert and Delete Columns and Format the excel sheet
Paste, and selecting cells Rows-Create Borders-Merge and
Center
b. Add Background Color-Change
the Font, Font Size, and Font
Color
c. Format text with Bold, Italicize,
and Underline-Work with Long
Text-Change a Column's Width
16. To use built in functions and a. Sort and filter data in a Use built in functions in
Formatting Data worksheet Excel
b. Perform Mathematical
Calculations verify -AutoSum
c. Perform Automatic Calculations-
Align Cell Entries
17. To enter a Formula for automatic a. Enter formula
calculations b. Use Cell References in Formulae Enter formula for automatic
calculations
c. Use Automatic updating function
of Excel Formulae
d. Use Mathematical Operators in
Formulae
e. Use Excel Error Message and
Help
18. To Create Excel Functions, a. Use Reference Operators a. Create Excel sheets
Filling Cells b. Work with sum, Sum if , Count involving cross references
and Count If Functions and equations
c. Fill Cells Automatically b. Use the advanced
functions for conditional
calculations
19. To Practice Excel Graphs and a. Produce an Excel Pie Chart a. Use data in Excel sheet to
Charts b. Produce an Excel Column Chart Create technical charts and
c. Practice creating any Chart graphs Produce Excel Line
Graph
b. Produce a Pictograph in
Excel
20. To format a Worksheet in Excel, a. Shade alternate rows of data a. Format Excel sheet
page setup and print b. Add currency and percent b. Insert headers &footers
symbols and print
c. Change height of a row and
width of a column
d. Change data alignment
e. Insert Headers and Footers
f. Set Print Options and Print
21. To familiarize with Ribbon layout Use various options in Home, insert, Access required options in
&features of PowerPoint 2007. design, animation , slideshow, the tool bar
Review &View in the PowerPoint
81
Exp
No.
22. To create a simple PowerPoint a. Insert a New Slide into a. Create simple PowerPoint
Presentation PowerPoint presentation with
b. Change the Title of a PowerPoint photographs/ClipArt and
Slide text boxes
c. PowerPoint Bullets b. Use bullets option
d. Add an Image to a PowerPoint
Slide
e. Add a Textbox to a PowerPoint
slide
23. To Set up a Master Slide in a. Create a PowerPoint Design a. Setup Masterslide and
PowerPoint and add notes Template format
b. Modify themes b. Add notes
c. Switch between Slide master
view and Normal view
d. Format a Design Template
Master Slide
e. Add a Title Slide to a Design
Template
f. The Slide Show Footer in
PowerPoint
f. Add Notes to a PowerPoint
Presentation
24. To Insert Text and Objects a. Insert Text and objects Inset Text and Objects
b. Set Indents and line spacing Use 3d features
c. Insert pictures/ clipart
d. Format pictures
e. Insert shapes and WordArt
f. Use 3d features
g. Arrange objects
25. To insert a Flow Chart / a. Create a Flow Chart in Create organizational charts
Organizational Charts PowerPoint and flow charts using smart
b. Group and Ungroup Shapes art
c. Use smart art
26. To insert a Table a. PowerPoint Tables Insert tables and format
b. Format the Table Data
c. Change Table Background
d. Format Series Legend
27. To insert a Charts/Graphs a. Create 3D Bar Graphs in Create charts and Bar
PowerPoint graphs, Pie Charts and
b. Work with the PowerPoint format.
Datasheet
c. Format a PowerPoint Chart Axis
d. Format the Bars of a Chart
e. Create PowerPoint Pie Charts
f. Use Pie Chart Segments
g. Create 2D Bar Charts in
PowerPoint
h. Format the 2D Chart
e. Format a Chart Background
82
Exp
No.
28. To Insert audio &video, a. Insert sounds in the slide and a. Insert Sounds and Video
Hyperlinks in a slide hide the audio symbol in appropriate format.
b. Adjust the volume in the settings b. Add narration to the slide
Add narration to the slide c. Insert video file in the format c. Use hyperlinks to switch
supported by PowerPoint in a to different slides and
slide files
d. Use automatic and on click
options
e. Add narration to the slide
f. Insert Hyperlinks
29. To Practice Animation effects a. Apply transitions to slides Add animation effects
b. To explore and practice special
animation effects like Entrance,
Emphasis, Motion Paths &Exit
30. Reviewing presentation a. Checking spelling and grammar a. Use Spell check and
b. Previewing presentation Grammar feature
c. Set up slide show b. Setup slide show
d. Set up resolution c. Add timing to the slides
e. Exercise with Rehearse Timings d. Setup automatic slide
feature in PowerPoint show
f. Use PowerPoint Pen Tool during
slide show
g. Saving
h. Printing presentation
(a) Slides
(b) Handout
83
III SEMESTER
84
(III Semester)
C-16 Curriculum
Instruction
Scheme Of Examinations
Total Periods
Per Semester
Periods/Week
End Exam
Sessional
Duration
Practical
Theory
Marks
Marks
Marks
Total
(hrs)
THEORY SUBJECTS
PET-301 Engineering Mathematics-II 5 - 75 3 20 80 100
PET-302 Electrical Technology 4 - 60 3 20 80 100
PET-303 Fluid Mechanics 5 - 75 3 20 80 100
PET-304 Drilling and Well Completions 5 - 75 3 20 80 100

Petroleum Exploration
PET-305 5 - 75 3 20 80 100
Methods
PRACTICAL SUBJECTS
PET-306 Petroleum Analysis Lab - 6 90 3 40 60 100
PET-307 Drilling Fluids Lab - 6 90 3 40 60 100

Geophysical Methods of
PET-308 - 3 45 3 40 60 100
Exploration Lab
PET-309 Fluid Mechanics Lab - 3 45 3 40 60 100
Total 24 18 630 260 640 900
PET-301 : Common to all

PET-302, 303, 309 : Common with DCHE
PET-304, 305,306, 307, 308 : Not common to any course
85
ENGINEERING MATHEMATICS – II
(Common Subject)
Subject title : Engineering Mathematics -II

Periods / Semester : 75
Blue print
OBJECTIVES
S. No of Weightage
Major Topic Short Type Essay Type
No Periods of Marks
Unit - I R U App R U App
1 1 1
1 Indefinite Integration 15 21 1 1 0
2 2 2
Unit - II
Definite Integration 1
2 35 60 1 1 3 1 1 22
and its applications
Unit - III
3 Differential Equations 25 29 2 1 0 1 1 0
1 1
Total 75 110 4 3 3 2 2
2 2
30
Marks: 12 9 9 25 25 30
R: Remembering type 37 marks

U: Understanding type 34 marks
App: Application type 39 marks
Upon completion of the subject the student shall be able to
Unit-I
1.0 Indefinite Integration
1.1 Explain the concept of Indefinite integral as an anti-derivative.
1.2 State the indefinite integral of standard functions and properties of Integrals  (u +
v) dx and  ku dx where k is constant and u, v are functions of x.
1.3 Solve integration problems involving standard functions using the above rules.
1.4 Evaluate integrals involving simple functions of the following type by the method of
substitution.
86
i)  f(ax + b) dx where f(x) dx is in standard form.
ii)  [f(x)]n f (x) dx
iii)  f (x)/[f(x)] dx
iv)  f {g(x)} g (x) dx
1.5 Find the Integrals of tan x, cot x, sec x and cosec x using the above.
1.6 Evaluate the integrals of the form  Sinm Cosn . d where m and n are positive
integers.
1.7 Evaluate integrals of powers of tan x and sec x.
1.8 Evaluate the Standard Integrals of the functions of the type
1 1 1
i) , ,
 x  x  a
2 2 2 2 2 2
a a x
1 1 1
ii ) , ,
 x  x  a
2 2 2 2 2 2
a a x
 a  a  x
2 2 2 2 2 2
iii ) x , x , a
1.9 Evaluate the integrals of the type
1 1 1
 a  b S in d  ,  a  b cos 
d and  a c o s   b s in   c
d .
1.10 Evaluate integrals using decomposition method.

1.11 Evaluate integrals using integration by parts with examples.
1.12 State the Bernoulli‘s rule for evaluating the integrals of the form  u .vdx .
1.13 Evaluate the integrals of the form  ex [f(x) + f (x)] dx.
Unit-II
(a) Understand definite integral and its properties
2.1 State the fundamental theorem of integral calculus
2.2 Explain the concept of definite integral.
2.3 Calculate the definite integral over an interval.
2.4 State various properties of definite integrals.
2.5 Evaluate simple problems on definite integrals using the above properties.
(b) Real life applications of definite integrals

2.6 Explain definite integral as a limit of sum by considering an area.
2.7 Find the areas under plane curves and area enclosed between two curves using
integration.
2.8 Obtain the volumes of solids of revolution.
2.9 Obtain the mean value and root mean square value of the functions in any given
interval.
2.10 Explain the Trapezoidal rule, Simpson‘s 1/3 rules for approximation of integrals
and provide some examples.
(c) Certain special integrals: Laplace Transforms
2.11 Write the definition of Laplace Transform and explain sufficient conditions for its
existence.
2.12 Provide formulae for Laplace transforms of standard functions.

87
2.13 State Linear property, First shifting property, Change of Scale property for Laplace
transforms. Solve simple problems using these properties.
t
n f (t ) (n)
2.14 Write formulae for Laplace transform of t f ( t ),
t
, f ( t ),  f (u ) d u in terms
0
of Laplace transform of f ( t ) . Provide simple examples on these functions.
2.15 Define unit step function and write the Laplace Transform of unit step function.
State second shifting property.
2.16 Define inverse Laplace Transform and write inverse Laplace Transform of
standard functions. Solve simple problems.
2.17 Write first shifting property of inverse Laplace Transform with examples
2.18 Define convolution of two functions and state convolution theorem with few
examples for understanding only.
(d) Understand the Fourier series expansion of functions
2.19 Define Fourier series of a function on the interval 𝑐, 𝑐 + 2𝑙 and state sufficient
conditions for its existence. Write the Euler‘s formulae for determining the Fourier
coefficients.
2.20 Find Fourier series of simple functions in the

range 0,2𝑙 , 0,2𝜋 , −𝑙, 𝑙 𝑎𝑛𝑑 −𝜋, 𝜋 .
2.21 Find Fourier coefficients for even and odd functions in the interval
−𝑙, 𝑙 𝑎𝑛𝑑 −𝜋, 𝜋 in simple examples.
2.22 Define half range Fourier sine and cosine series of a function over the interval
( 0 , l ) with examples.
3.0 Introduction to Differential Equations
3.1 Define a Differential equation, its order, degree

3.2 Form a differential equation by eliminating arbitrary constants.
3.3 Solve the first order first degree differential equations by the following methods:
i. Variables Separable.
ii. Homogeneous Equations.
iii. Exact Differential Equations
iv. Linear differential equation of the form dy/dx + Py = Q,
where P and Q are functions of x or constants.
iv. Bernoulli‘s Equation (Reducible to linear form.)
3.4 Solve Differential equations of the type (aD2 +bD + c)y = 0 when the roots
of the auxiliary equation are real and different, real and repeated,
Complex conjugates.
88
3.5 Solve the higher order homogeneous differential equations with constant
coefficients.
3.6 Explain the concept of complementary function, particular Integral and general
solution of a differential equation.
3.7 Solve nth order differential equation of the type f(D) y = X where f(D) is a
polynomial of nth order and X is a function of the form k, eax , Sinax, Cosax, xn.
3.8 Solve simple problems leading to engineering applications
COURSE CONTENT
Unit-I
Indefinite Integration:
1. Integration regarded as anti-derivative – Indefinite integral of standard functions.
Properties of indefinite integral. Integration by substitution or change of variable. Integrals of
the form
sinm. cosn . where m and n are positive integers. Integrals of tan x, cot x, sec x, cosec
x and powers of tan x, sec x by substitution.
Evaluation of integrals which are reducible to the following forms :
1 1 1
i) , ,
 x  x  a
2 2 2 2 2 2
a a x
1 1 1
ii ) , ,
 x  x  a
2 2 2 2 2 2
a a x
 a ,  a ,  x
2 2 2 2 2 2
iii ) x x a
Integration by decomposition of the integrand into simple rational, algebraic functions.
Integration by parts, Bernoulli‘s rule.
Unit-II
Definite Integral and its applications:
2. Definite integral-fundamental theorem of integral calculus, properties of definite integrals,
evaluation of simple definite integrals. Definite integral as the limit of a sum. Area under
plane curves – Area enclosed between two curves. Volumes of solids of revolution.
Mean and RMS values of a function on a given interval. Trapezoidal rule, Simpson‘s
1/3 rule to evaluate an approximate value of a define integral.
. Definition, sufficient conditions for existence of Laplace Transform (LT), LT of elementary

functions, linearity property, scale change property, first shifting property, multiplication
by tn, division by t, LT of derivatives and integrals, unit step function, LT of unit step
function, second shifting theorem, inverse Laplace transforms- shifting theorems and
change of scale property, multiplication by sn and division by s – examples of inverse LT
using partial fractions – convolution theorem (no proof).
Representation of a function in Fourier series over the interval (𝑐, 𝑐 + 2𝑙), Give sufficient
conditions for existence of Fourier series. Euler‘s formulae for Fourier coefficients,
89
Finding Fourier coefficients for simple functions, elementary even and odd functions.
Define half range Fourier series.
Unit -III
Differential Equations:
Definition of a differential equation-order and degree of a differential equation- formation
of differential equations-solution of differential equation of first order, first degree:
variable-separable, homogeneous, exact, linear differential equation, Bernoulli‘s equation.
Homogenous linear differential equations with constant coefficients of order two and
higher with emphasis on second order.
Non-homogenous linear differential equations with constant coefficients of the form

f(D)y = X, where X is in the form k, eax, sin ax, cos ax, xn, (n= 1,2) – complimentary
function, particular integral and general solution.
Reference Books:
1. Integral Calculus Vol.I, by M.Pillai and Shanti Narayan
2. Thomas‘ Calculus, Pearson Addison –Wesley Publishers
3. A Text book of Engg. Mathematics by B.S.Grawel
4. A Text book of Engg. Mathematics by B.V.Ramana- T.Mc Graw Hill Publishers
90
ELECTRICAL TECHNOLOGY
Subject Title : Electrical Technology

Subject – Code : PET-302
Periods / Week : 04
TIME SCHEDULE
Weightage Short
S. No. of Essay
Major Topics of answer
No. Periods type
Marks type
1 D.C & A.C Circuits 15 24 3 1½
2 Electromagnetism and Electromagnetic Induction 10 18 1 1½
3 D.C. & A.C. Machines 20 39 3 3
4 Electrical Measuring Instruments 05 13 1 1
Different equipments & safety procedures used in
5 05 08 1 ½
Industry
6 Electronic Devices 05 08 1 ½
OBJECTIVES:
Upon the study, at the end of the Semester, the Student will be able to,
Unit-1: D.C & A.C Circuits

1.1 Understand the concepts of Current, Electric potential, potential difference,
Resistance, Conductance, Specific resistance and conductivity.
1.2 Laws of resistance & Statement of Ohms Law.
1.3 Calculation of current, Voltage and Resistance in a given dc circuit.
1.4 Calculation of equivalent resistance in a – Series Circuit, parallel Circuit.
1.5 Simple problems on Series, Parallel Circuits.
1.6 State and explain Kirchhoff‘s of Laws.
1.7 Define the following terms related to alternating quantities.
i) Alternating quantity ii) wave form iii) Cycle iv) Time period v) frequency vi)
instantaneous value vii) RMS value viii) average value ix)form factor x) peak factor.
1.8 Express instantaneous value, RMS value and average value in terms of maximum value.
1.9 Explain phase and phase difference between two alternating quantities.
1.10 State leading and lagging vector quantities.
1.11 State phase relationships between voltage and current in (a) R (b) L (c) C (d) R – L –
C in series.
1.12 Define Power factor.
1.13 State equation for i) Active power ii) reactive power iii) apparent power in single phase
AC circuits.
1.14 Explain Star and Delta connections in 3 - Ф circuits.
1.15 State phase and line voltages and currents and their relationship in Star and Delta
connections.
1.16 State expression for i) Active power ii) reactive power iii) apparent power in 3- phase
AC circuits.
1.17 Simple problems on the above.
Unit-2: Electromagnetism and Electromagnetic Induction
91
2.1 Explain the terms – permeability, magnetic field strength, flux and Flux density –
Relation between permeability, flux density and magnetic field strength.
2.2 Express the field strength due to i) straight current carrying conductor ii) on the axis of
a solenoid.
2.3 State the following terms related to electromagnetic induction
i. Faraday‘s laws of electromagnetic induction
ii. Fleming‘s Left Hand Rule
iii. Statically Induced EMF
iv. Dynamically Induced EMF
v. Self induced EMF
vi. Mutually Induced EMF
vii. Lenz‘s Law.
2.4 Give the expression for self inductance, Mutual Inductance and Coefficient of coupling.
(No derivation).
2.5 Simple problems on above.
Unit-3: DC & AC machines

3.1 List the parts and function of each part of the D.C. Machine.
3.2 Classify the D.C. Machines as D.C. Generators and D.C. Motors – State their working
principle.
3.3 State generated EMF equation. (No derivation).
3.4 State and explain Back EMF (No derivation).
3.5 State torque equation. (No derivation).
3.6 Solve simple problems on above.
3.7 Explain the necessity of starter and explain 3 point starter with neat diagram.
3.8 Explain speed control of D.C. Shunt motor by armature control and (b) Field control
methods.
3.9 State the applications of D.C. Generators and D.C. Motors
3.10 Explain the principle of working of a transformer.
3.11 Classify the types of transformers basing on construction of the transformers. (Core
type and shell type).
3.12 State EMF equation of a transformer. Solve simple problems. (No derivation).
3.13 State step – up and step – down transformers.
3.14 Explain Auto transformers.
3.15 Classify the three phase induction motors and single phase Induction motors – state
the application of each motor.
3.16 Explain the construction and working principles of 3 – phase Induction Motors
3.17 Explain the construction and working principles of 1 – phase Induction Motors
3.18 Explain the necessity of starter in 3-phase induction motor
3.19 Explain i) DOL starter ii) Star Delta Starter with neat diagrams.
3.20 State the applications of 1 phase and 3-phase induction motors.
Unit-4: Electrical measuring instruments

4.1 Explain the construction and working of moving iron and moving coil instruments.
4.2 State uses of (a) Megger (b) Multi meter and (c) Energy Meter in electrical circuits.
4.3 Explain Thermocouple instruments for measuring temperatures.
Unit-5: Different equipments & safety procedures used in industry

5.1 Explain the basic principles of electric Heating.
5.2 State applications of electric Heating.
5.3 Explain the basic principles of electric welding.
92
5.4 Classify the methods of electric welding, state applications of each method.
5.5 Describe the working of DC welding generator with neat diagram.
5.6 Describe the working of welding transformer with neat diagram.
5.7 State the function of the following i) Switch ii) Fuse iii) Circuit breaker iv) Relay v)
Capacitor banks.
5.8 State safety precautions to be adopted for prevention of electric shock to persons
working on electric equipments or live wires.
5.9 State procedures for first aid to a person came into contact with live wires.
Unit-6: Electronic Devices

6.1 Classify the materials like conductors, insulators and semi conductors based on i)
Valence electrons ii) Conductivity iii) Energy band diagrams.
6.2 Explain the P- type semiconductor and N – type semiconductor.
6.3 Explain P – N Junction diode.
6.4 State the applications of a P – N Junction diode (as a rectifier).
6.5 Explain the P– N – P and N – P – N transistors and their applications.
COURSE CONTENT:
1. Concepts of Current, Electric potential, potential difference, Resistance, Conductance,

Specific resistance and conductivity. Ohm‘s Law – simple problems on D.C circuits –
Equivalent and resistance- Parallel circuits – Kirchhoff‘s Laws – Problems- Single
Phase circuits – Definitions related to alternative quantities - Phase and phase
difference – leading and lagging quantities – Phase relationships between voltage and
current in R, L, C, and R-L-C in series – define power factor – Solve simple A.C
circuits – expression– active power and reactive power- apparent power in single phase
circuits- star and delta connections in 3-phase circuits - expression– active power and
reactive power- apparent power – simple problems on above.
2. Concepts of different terms related to Electromagnetism – electromagnetic induction –

expressions for field strength due to straight current carrying conductor and on the axis
of solenoid - Dynamically induced EMF – statically induced EMF – self and mutually
induced EMF – self inductance and mutual inductance – Simple Problems.
3. D.C & A.C. Machines – working – construction – types of D.C generators – types of
D.C motors – Generated EMF – Back EMF – torque – equations – 3 – point starter –
speed control – Applications of D.C Generators D.C. Motors- Single – phase– Auto
transformers – Construction and working principles of 3-phase and single phase
induction motors – DOL starter and Star delta starter Applications - Single – phase and
Three – Phase induction motors.
4. Electrical Measuring Instruments – Construction and working of moving iron and

moving coil instruments – Megger, Multi-meter – Single – Phase energy meter –
Thermocouple Instruments.
5. Understand the different equipments & safety procedures used in industry basic
principles of electric heating and welding methods – classification of methods of
electric heating and welding with their applications- D.C welding generator- welding
transformer – functions of switch, fuse, circuit breaker, Relay , Capacitor banks and -
safety precautions to prevent shock – safety procedures for first aid against electric
shock.
93
6. Electronic Devices – Semiconductors – P type and N type semiconductor – P – N
Junction diode –PNP transistor and NPN transistors with their applications.
REFERENCES BOOKS:
1. Electrical Technology – By B.L. Theraja (Vol – I and Vol – II)

2. Fundamentals of Electrical Engineering and Electronics – By B.L. Theraja.
3. The Art and Science of utilization of electrical energy - By H. Partab.
4. Electrical Technology – By Huges.
5. Electrical Technology – By V.K. Mehta
94
FLUID MECHANICS
Subject Title : Fluid Mechanics

Total periods/ semester : 75
TIME SCHEDULE:
Short
No. of Weightage Essay
S.No. Major topics answer
periods of Marks type
type
Introduction to Fluid flow
1. 15 26 2 2
phenomena
Basic equations of Fluid
2. 13 16 2 1
flow
Flow of incompressible
3. 14 19 3 1
fluids in pipes
Flow past immersed
4. 10 13 1 1
bodies
Transportation and
5. 23 36 2 3
Metering of fluids
Total 75 110 10 08
OBJECTIVES:
After completion of the course, the student will be able to,
1.0 Understand the Fluid flow phenomena

1.1 Define fluid and fluid mechanics.
1.2 State and discuss types of fluids.
1.3 State the important physical properties of fluid and give their units.
1.4 Explain compressible and incompressible fluids and give examples.
1.5 Explain fluid statics and static pressure.
1.6 Explain the concept of pressure and its measurement.
1.7 Explain the working of ‗U‘ tube manometer and inverted ‗U‘ tube manometer,
1.8 Know about inclined manometer.
1.9 State Newton‘s law of viscosity.
1.10 Explain Newtonian and non Newtonian fluids and give examples.
1.11 Distinguish Laminar flow and turbulent flow.
1.12 Describe Reynold‘s experiment.
1.13 Explain the importance of Reynold‘s number.
1.14 Explain the flow in boundary layers.
1.15 Explain the Boundary layer separation and its effects on flow.
1.16 Solve simple problems on calculation of Reynolds number and pressure drop while
using manometers.
2.0 Know about basic equations of fluid flow

2.1 Know about mass balance.
2.2 Derive continuity equation.
2.3 Simple problems on Continuity equation
2.4 Know about momentum balance.
2.5 State Bernoulli‘s theorem and write Bernoulli‘s equation without friction
95
2.6 Derive Bernoulli‘s theorem without friction
2.7 State the modified Bernoulli‘s equation for friction flow
2.8 Know about Kinetic energy correction.
2.9 Know the pump work in Bernoulli‘s equation.
2.10 Solve simple problems on calculation of various heads using Bernoulli‘s equation
2.11 Simple problems on pump work calculation
3.0 Know about flow of incompressible fluids in conduits

3.1 Explain flow of incompressible fluids in pipes.
3.2 Explain velocity and shear stress distribution in pipes
3.3 Define friction factor and know the equations connecting friction factor.
3.4 Explain laminar flow in pipes.
3.5 Know average velocity and kinetic energy correction factor.
3.6 State Hagen Poiseuille equation.
3.7 Simple problems on Hagen Poiseuille equation for pressure drop calculation.
3.8 Know about friction factor in laminar and turbulent flow
3.9 Know about the relation between pressure drop and friction factor.
3.10 Know the effect of roughness.
3.11 Explain the friction factor chart.
3.12 Understand the energy loss due to (a) flow (b) pipe fittings (c) sudden expansion and
(d) sudden contraction.
3.13 Know about equivalent length in pipes
3.14 Solve simple problems on friction factor in Laminar & turbulent flow and energy
losses in fluid flow through pipes.
4.0 Understand about flow past immersed bodies

4.1 Define Drag.
4.2 Know about different types of drag.
4.3 Define drag coefficient.
4.4 Explain the relation between Drag Coefficient and Reynolds number.
4.5 Explain about Stoke‘s law.
4.6 Solve simple problems on Stoke‘s Law.
4.7 Know about Free & Hindered settling.
4.8 Explain about Packed bed.
4.9 Know the equations to calculate pressure drop in packed beds.
4.10 Explain the process of fluidization.
4.11 Applications of fluidization.
5.0 Know about Flow measurement & Transportation of fluids:

5.1 Know the classification of pipes and tubes.
5.2 Know about Schedule number and gauge for pipes and tubes.
5.3 Know the various types of pipe fittings.
5.4 Explain the classification and working of valves
(a) gate valve (b) globe valve (c) plug valve (d) check valves and (e) diaphragm valve.
5.5 Explain the classification of Flow meters (a) Head Meters (b) Area meters
5.6 Explain the principle and working of venturi meter with line diagram
5.7 Derive the equation for volumetric flow rate in venturimeter
5.8 Explain the principle and working of orifice meter with line diagram
5.9 Explain the principle and working of pitot tube with line diagram
5.10 Explain the principle and working of rotameter with line diagram
5.11 Indicate the functions of pump in fluid handling.
96
5.12 Describe the methods of classification of pumps.
5.13 Differentiate positive displacement and centrifugal pumps.
5.14 Know about the following pumps.
(i) Reciprocating Pumps (ii) Piston pump (iii) Plunger Pump (iv) Diaphragm Pump
5.15 Know about the following Rotary pumps
(i) Gear pump (ii) Screw pump
5.16 Describe with neat sketch the construction and operation of the Centrifugal pump.
5.17 Describe with neat sketch the construction and operation of the reciprocating piston
pump.
5.18 Explain the following
(a)Suction head (b) Discharge head (c) Total head (d) NPSH (e) Cavitation (f)
Priming (g) Mechanical efficiency (h) Power required.
5.19 Know about characteristic curves of centrifugal pumps.
5.20 Differentiate fan and blower.
5.21 Know about the working of (i) Fan (ii) Blower (iii) Vacuum pump (iv) Ejectors.
5.22 Solve problems based on calculation of velocities, volumetric flow rates using venturi
and orifice meters.
5.23 Solve problems on calculation of local velocity in pitot tube.
5.24 Simple problems on calculation of NPSH.
5.25 Simple problems on power required by a centrifugal pump.
COURSE CONTENT:
1. Introduction & fluid flow phenomena: Definition of fluid– Compressible and in

compressible fluids– Newtonian and Non-Newtonian fluids– Physical properties of fluids–
Density, Viscosity, velocity head, pressure head and static head– Pressure concept–
Manometers: U – Tube Manometer, inverted U tube manometer, Inclined manometer–
Laminar flow – Turbulent flow– Reynold‘s experiment- Importance of Reynold‘s number-
Flow in boundary layer- Solve problems on Reynolds number and Pressure drop in
manometers, Boundary layer separation and its effects on flow.
2. Basic equations for fluid flow: Mass balance- Momentum balance, Continuity equation-
Bernoulli‘s equation– Modified Bernoulli‘s equation for frictional flow and pump work-
kinetic energy correction- Solve problems on various heads using Bernoulli‘s equation and
pump work in Bernoulli‘s equation
3. Flow of incompressible fluids in pipes: Flow of incompressible fluids-Shear stress
distribution in pipes- Equation for friction factor- Laminar flow in pipes- Average velocity-
Kinetic energy factor- Hagen Poiseuille equation- average velocity- Roughness- Friction
factor chart- Energy loss for fluids during flow – Expansion and contraction losses in fitting-
equivalent length- Solve simple problems on friction factor in Laminar & turbulent flow ,
Hagen Poiseuille equation and energy losses in fluid flow through pipes.
4. Flow past immersed bodies: Drag- Types of Drag-Drag coefficient– Stokes law- Drag
coefficient Vs Reynolds number curve- Friction in flow through beds of solids– Packed bed-
void fraction- Pressure drop equations- Free settling-hindered settling-equations for terminal
velocities for different particle Reynolds number ranges– Fluidization – Fluidization
velocities and pressure drops-Applications of fluidization-simple problems on Stoke‘s law..
5. Metering and transportation of fluids: Flow meters- Head meters, Area meters- Orifice
meter, Venturi meter, Pitot tube ,Rotameter- Schedule number, gauge for pipes-Pipes and
tubes – Pipe fitting and joints – Valves – Gate valve, Globe valve, Plug valve, Check valve,
Diaphragm valve– Pumps-functions of a pump- Classification- Positive displacement pumps
–Reciprocating pumps : Piston, Plunger pumps, Diaphragm pumps, - Rotary pumps-Gear
pump, screw pump– Centrifugal pumps – Suction head – Discharge head – Total developed
97
head- NPSH– Priming – Cavitation– Characteristic curve – Equipment for gas flow- fans,
blowers, Vacuum producing equipment– Ejectors– Solve simple problems on calculation of
velocities, volumetric flow rates using Venturi, orifice meters and pitot tube, power required
by a centrifugal pump.
REFERENCE BOOKS:
(1) Unit operations of chemical Engg. by warren L.Mc Cabe, Julian C.Smith and Peter
Harriott, Fifth edition, Mc Graw Hill Publication.
(2) Introduction to Chemical Engg. by Walter L.Badger & Julius T.Banchero. Mc
GRAW Hill Publication.
(3) Chemical engineering Series, Coulson & Richardson, Vol-1,5th edition,
Butterworth & Heinmannn Publications.
(4) Unit operations –1: K.A.Ghavane, Nirali Prakashan Publications.
98
DRILLING AND WELL COMPLETIONS
Subject title : DRILLING AND WELL COMPLETIONS

Periods / week : 05
TIME SCHEDULE
Weightage
No. of
Periods
marks
1. Introduction to Drilling 10 13 1 1
2. Drilling Fluids & Drilling Bits 15 26 2 2
3. Casing and Cementation 10 13 1 1
4. Introduction to Completion 10 16 2 1
Connecting the Pay zone and
5. 10 16 2 1
Bore hole
Equipment of Naturally
6. 20 26 2 2
Flowing Wells
OBJECTIVES:
Unit-1: Introduction to Drilling

1.0 Know about Introduction of Oil and gas well drilling.
1.1 Know about Personal at rig site.
1.2 Know about drilling rig types.
1.3 Know about Rig power system.
1.4 Know about Hoisting system.
1.5 Know about Circulation system.
1.6 Know about rotary system.
1.7 Know about drilling cost analysis.
Unit-2: Drilling fluids & Drilling Bits

2.0 Know about Drilling fluids.
2.1 Know about types of drilling fluids
2.2 Know about Drilling fluids classification systems
2.3 Know about various drilling fluid additives
2.4 Know about Material Balance Equations.
2.5 Know about Oil based drilling fluids.
2.6 Know about drilling fluid properties.
2.7 Know about drilling fluid report.
2.8 Know about Cuttings transport.
2.9 Know about the importance of drill bits in drilling operations
2.10 Know about the types of drill bit.
2.11 Know about circulation systems.
2.12 Know about selection and evaluation of drill bit.
2.13 Know about factors that affect the rate of penetration
99
Unit-3: Casing and Cementation
3.0 Know about the introduction and applications of casing.
3.1 Know about the types of casing.
3.2 Know about the importance of production casing.
3.3 Know about the functions of cementation.
3.4 Know about different kinds of cements used in cementing operation.
3.5 Know about the physical properties of cements
3.6 Know about the method of primary cementing.
3.7 Know about method of liner cementing.
3.8 Know about method of squeeze and plug back cementing.
3.9 Know about cement additives.
Unit-4: Introduction to Completion

4.0 Know about Main factors influencing completion design
4.1 Know about Overall approach to a well‘s flow capacity
4.2 Know about Major types of completion configurations
4.3 Know about Main phases in completion
Unit-5: Connecting the Pay zone and Bore hole

5.0 Know about Drilling and using the pay zone
5.1 Know about Evaluating and Restoring the cement Job
5.2 Know about Perforating
5.3 Know about treating the pay zone
5.4 Know about The special case of Horizontal wells
Unit-6: Equipment of Naturally Flowing Wells
6.0 Know about General Configuration of flowing well Equipment
6.1 Know about The production well head
6.2 Know about The production string or tubing
6.3 Know about Dow hole equipment
6.4 Know about Subsurface safety valves
6.5 Know about running procedure
COURSE CONTENT:
Unit-1: Introduction to Drilling
Introduction of Oil and gas well drilling-Personal at rig site-Tool pusher-Company man-
Driller-Derrick man-Floor men-Mud Engineer, Mud Logger-Drilling rig types-land rigs-
offshore rigs-Rig power system- Hoisting system-derrick-block and tackle-drawworks-
Circulation system-mud pumps-Rotary system-swivel-Kelly-rotary drive-Drilling cost
analysis-Drilling cost-Drilling time-Tripping time.
Unit-2: Drilling fluids & Drilling Bits

Drilling fluids-Make up of a drilling fluid-Types of drilling fluids-Normal drilling fluids-
Special drilling fluids-Drilling fluids classification systems-Polymer mud systems-Air, mist,
foam based mud systems, work over mud system-Various drilling fluid additives-Material
Balance Equations-Oil based drilling fluids-Electrical stability-Oil/water ratio-Aniline point-
Drilling fluid properties-Pressure-Drilling fluid report-Density-Plastic viscosity-Yield point-
Gel strength-PH-Sand content-Funnel viscosity-Cuttings transport-Cutting slip viscosity -
Importance of drill bits in drilling operations-Journal angle-Types of drill bit-Roller cone bit-
Fixed cutter bit-Coring bit- Circulation systems-Regular circulation bit-Jet circulation bit-
Air/gas circulation bits-Jet nozzles-Selection and evaluation of drill bit-Tooth wear-Bearing
100
wear-Gauge wear-Factors that effect the rate of penetration-Bit type-Formation
characteristics-Drilling fluid properties-Operating conditions of drilling.
Unit-3: Casing and Cementation

Casing and cementation-types of casings-conduction casing –surface casing-intermediate
casing-production casing- liner casing- applications of casing-cementing operations-
introduction to cementation- types of cementation- primary cementation-secondary
cementation- application of cementations- physical properties of cements- method of liner
cementing- method of squeeze and plug back cementing- cement additives
Unit-4: Introduction to well completion

Main factors influencing completion design – Parameters related to the well‘s purpose,
Environment, Drilling, Reservoir, Production, Completion techniques, Overall approach to a
well‘s flow capacity – Base equations, Analysis of the different terms and resulting
conclusions, performance curves, Major types of completion configurations – Base
requirements, Pay zone – Borehole connection basic configurations, Main configurations of
production strings – Main phases in completion – Checking and conditionally the borehole,
Remedial cementing, Restablishing pay zone – Bore hole communication, Well testing,
Treating the pay zone, Equipment Installation, Putting the well on stream and assessing
performance, Moving the rig, Measurements, Maintenance, Work over and abandonment.
Unit-5: Connecting the pay zone and the Bore hole

Drilling and using the pay zone – Well safety, Fluids used to drill in the pay zone, Drilling
and Casing diameters, Casing and Cementing – Evaluating and Restoring the cement Job –
Evaluating cement job, Remedial cementing, Perforating – Shaped charges, Main parameters
affecting the productivity of the zone produced by perforating, Perforating methods and
corresponding types of guns, Specific points in the operating technique – Treating the pay
zone – Problems Encountered, Main types of remedial action for poor consolidation sand
control, Main types of remedial action for insufficient productivity well stimulation – The
special case of Horizontal wells – Advantages in producing reservoirs, Problems specific to
the pay zone – Bore hole connection.
Unit-6: The Equipment of naturally flowing wells

General Configuration of flowing well Equipment – The production well head – Hanging the
tubing, Christmas tree, The production string or tubing – Tubing characteristics, Choosing the
tubing, Packers – Packer Fluids, Main packer types, Choosing the packer, Permanent
production packers, Retrievable packers – Dow hole equipment – Circulating devices,
Landing nipples, Subsurface safety valves – Subsurface controlled Subsurface safety valves
(SSCSV), Surface controlled Subsurface safety valves (SCSSV) – Running procedure –
Preliminary operations, Running Subsurface Equipment in a well equipped with a permanent
packer, Main differences in running Subsurface equipment when there is a hydraulic packer,
Installing the Christmas tree and Bringing the well on stream, Final completion report.
TEXT BOOKS:
1. Drilling Engineering by DIPL-ING, WOLFGANG F.PRASSL. Curtin University of
Technology.
2. Drilling Engineering work book by 80270H Rev.B December-1995, Baker Huges INTEQ
Learning Course.
101
PETROLEUM EXPLORATION METHODS
Subject title : PETROLEUM EXPLORATION METHODS

Periods / week : 05
TIME SCHEDULE
Weightage
No. of
Periods
marks
Geological and Geochemical methods of
1 20 29 3 2
Hydrocarbon Exploration
Basic concepts of Magnetic method of
2 10 16 2 1
Basic concepts of Gravity method of
3 10 16 2 1
4 Introduction to Seismic Exploration 15 23 1 2
5 Seismic Reflection & Refraction 20 26 2 2
75 110 10 08
OBJECTIVES:
Unit-1: Geological and Geochemical methods of Hydrocarbon Exploration

1.0 Know the methods of hydrocarbon exploration.
1.1 Know about occurrence of petroleum in sedimentary basins
1.2 Know the origin and generation of petroleum.
1.3 Know the migration and accumulation of petroleum.
1.4 Know about geochemical methods in petroleum exploration.
1.5 Know about source rock evaluation and correlations.
1.6 Know about surface geochemical prospecting of hydrocarbons
Unit-2: Basic concepts of Magnetic method of Hydrocarbon Exploration

2.0 Know about magnetic properties.
2.1 Know about the magnetic field of the earth.
2.2 Know about magnetic instruments.
2.3 Know about magnetic surveys.
2.4 Know about simple magnetic interpretation
Unit-3: Basic concepts of Gravity method of Hydrocarbon Exploration

3.0 Know about physical basis of the gravity method.
3.1 Know about gravity meters.
3.2 Know about gravity reductions.
3.3 Know about gravity surveys.
3.4 Explain about field interpretation.
Unit-4: Introduction to Seismic Exploration

4.0 Know about seismic waves.
4.1 Know about seismic sources.
102
4.2 Know about detection of seismic waves.
4.3 Know about recording seismic signals.
Unit-5: Seismic Reflection & Refraction

5.0 Know about seismic reflection theory
5.1 Know about seismic reflection surveys.
5.2 Know about seismic refraction surveys.
5.3 Know about field interpretation of seismic refraction.
5.4 Know about limitations of the seismic refraction method.
COURSE CONTENT:
UNIT-1: Geological and Geochemical methods of Hydrocarbon Exploration

Methods of hydrocarbon exploration-Geological, geochemical, gravity, magnetic, seismic,
radiometric and electromagnetic methods-Occurrence of petroleum in sedimentary basins-
Definition of sedimentary basin-Classification of sedimentary basins-Environmental control-
Relation between basin and hydrocarbon richness-Classification of Indian Petroliferous
sedimentary basins-Origin and generation of petroleum-Inorganic theory (Abiogenic)-
Organic theory (Biogenic)-Genesis of petroleum-Migration and accumulation of petroleum-
Geochemical methods in petroleum exploration-Isolation of Kerogen and Bitumen-
Geochemical methods-Stable isotope analysis-Pyrolysis method-Time temperature index-
Level of organic metamorphism-Source rock evaluation and correlations-Principles of source
rock-Interpretation of source rock-Surface geochemical prospecting of hydrocarbons-
Seepages-Surface geochemical prospecting-Categories of surface geochemical prospecting.
UNIT-2: Basic concepts of Magnetic method of Hydrocarbon Exploration
Magnetic properties-Poles, dipoles and magnetization-Susceptibility-Remanence-
Susceptibilities of rocks and minerals-Magnetic field of the earth-Main field of earth-
International geomagnetic reference field (IGRF)-Diurnal variations-Magnetic storms-
Geological effects-Magnetic instruments-Proton precession magnetometer-High sensitivity
(alkali vapor) magnetometers-Flux gate magnetometers-Magnetic surveys-Starting a Survey-
Monitoring diurnal variation-field procedures-standard values-Processing magnetic data-
Noise in ground magnetic surveys-Simple magnetic interpretation-Forms of magnetic
anomaly-Rule of thumb depth estimation.
UNIT-3: Basic concepts of Gravity method of Hydrocarbon Exploration
Physical basis of the gravity method-Gravity field of the earth-rock density-Gravity meters-
Astatic spring systems-Quartz astatic meters-Steel astatic meters-Meter calibration-Gravity
reductions-Latitude correction-Free air correction-Bouguer correction-Terrain corrections-
Gravity surveys-Survey principles-Base stations-Station positioning-Tidal effects-Drift
corrections-Elevation control-Field note books-Field interpretation-Bouguer plate-Nettleton‘s
method for direct determination of density.
UNIT-4: Introduction to Seismic Exploration
Seismic waves-Types of elastic waves-Seismic velocities and the time average equation-Ray-
path diagrams-reflection and refraction-Seismic sources-Hammers-other impact sources-
explosives-safety-time breaks-Detection of seismic waves-Geophones-detection of S-waves-
Detection in swamps and water-Noise-Seismic cables-Recording seismic signals-Single
channel seismographs-multichannel seismo graphs
UNIT-5: Seismic Reflection & Refraction
103
Seismic reflection theory-Reflection coefficients and acoustics impedances-normal move out-
effect of dip-multiple reflections-Seismic reflection surveys-Spread lens-common mid point
shooting-depth conversion-Seismic refraction surveys-principle refractors-critical refraction-
critical refraction-head wave-lengths of refraction spreads-Field interpretation of seismic
refraction-Intercept times-multiple layers-effect of dip-true velocities-Limitations of the
seismic refraction method-Direct waves-vertical velocities-hidden layers-Blind zones.
Text books:
1. Field Geophysics by John Milson, Third Edition-Wiley Publications.
2. Petroleum Geochemistry by D.Satyanarayana, Daya Publishing House, Delhi.
104
PETROLEUM ANALYSIS LAB
Subject title : PETROLEUM ANALYSIS LAB

Periods / week : 06
1. Determination of ASTM distillation characteristics of gasoline.

2. Determination of Reid vapor pressure of Crude oil & gasoline.
3. Determination of Viscosity of diesel and transformer oils.
4. Determination of Smoke point of kerosene.
5. Determination of Carbon residue of petroleum oils.
6. Determination of Flash & Fire points of gasoline, kerosene and other products.
7. Estimation of calorific value of LPG/gasoline.
8. Determination of Aniline point of gasoline and diesel oil.
9. Determination of softening point of bitumen.
10. Determination of Cloud & Pour points of petroleum products.
105
DRILLING FLUIDS LAB
Subject title : Drilling Fluids Lab

Periods / week : 06
List of experiments
1. Determination drilling fluid weight. Equipment: The baroid mud balance

2. Determination of mud viscosity. Equipment: Marsh funnel
3. Determination of pH of mud.
Equipment: pH meter and hydroid pH dispensers
4. Determination of mud Rheology (Viscosity, Gel strength, and Yield point).
Equipment: The baroid Rheometer
Oil, water, solid and clay content determination. Equipment: Oil/ water retort kit
106
GEOPHYSICAL METHODS OF EXPLORATION LAB
Subject title : Geophysical Methods of Exploration Lab

Periods / week : 03
List of Experiments:
1. Construction of Tissot diagram and evaluation of Kerogen macerals types. .
2. Estimation of total dissolved salts in oil field brines by TDS meter.
3. Determination of pH and Eh of different types of water-fresh, saline water and oil field
brine by a pH meter, and construction of pH-Eh diagrams delineating the stability regions
of different waters.
4. Calculation of gravity values for different latitudes.
5. Determination of variation of gravity with distance from the object.
6. Determination of reduction of gravity data by applying drift, free air, Bouguer and
Normal Corrections.
7. Determine the gravity anomaly sections and maximum gravity anomaly for
Different geometric Bodies like
a) Sphere or horizontal cylinder
b) Vertical cylinder
c) Horizontal slab
d) Vertical prism
e) Rectangular prism
8. Estimation of thickness of different sedimentary units from observed two-way travel
times.
107
FLUID MECHANICS LAB
Subject Title : Fluid Mechanics Lab

1. Calibration of given Rotameter and to draw calibration curve (Rotameter reading Vs

Actual discharge)
2. Identification of laminar & turbulent flow using Reynold‘s apparatus.
3. Conduct an experiment on Bernoulli‘s apparatus to verify Bernoulli‘s theorem.
4. Conduct an experiment on Orifice meter and determine the coefficient of discharge.
5. Conduct an experiment on Venturimeter and determine the coefficient of discharge.
6. Determination of friction factor in various pipes.
7. Determination of frictional losses in various pipe fittings.
8. Determination of Pressure drop in a packed bed for different fluid velocities.
9. Determination of characteristics of a Centrifugal Pump to draw the curves.
10. Determination of characteristics of a Reciprocating pump to draw the curves.
108
IV SEMESTER
109
(IV Semester)
C-16 Curriculum
Instruction
Scheme Of
Total Periods Per

Examinations
Periods/Week
Semester
EndExam
Sessional
Duration
Practical
Theory
Marks
Marks
Marks
Total
(hrs)
THEORY SUBJECTS
PET-401 Reservoir Engineering 5 - 75 3 20 80 100

Petroleum Refining Engineering &
PET-402 5 - 75 3 20 80 100
Petrochemical Technology
PET-403 Well Logging & Formation Evaluation 4 - 60 3 20 80 100
PET-404 Heat Transfer 5 - 75 3 20 80 100
PET-405 Mass Transfer 5 - 75 3 20 80 100
PRACTICAL SUBJECTS
PET-406 Reservoir Engineering Lab - 6 90 3 40 60 100
PET-407 Mass Transfer Lab - 6 90 3 40 60 100
PET-408 Communication skills - 3 45 3 40 60 100
PET-409 Heat Transfer Lab - 3 45 3 40 60 100
Total 24 18 630 260 640 900
PET-401, 402, 403,406, 407 : Not common with any course

PET-404, 405,409 : Common with DCHE
PET-408 : Common to All
110
RESERVOIR ENGINEERING
Subject title : Reservoir Engineering

Periods / week : 05
TIME SCHEDULE
No. of Weight age
S.No. Major Topics SAQ EAQ
Periods Of marks
Unit 1: some basic concepts and
1 10 16 2 1
fundamentals of reservoir fluid behavior
2 Unit 2: Reservoir Fluid properties 20 26 2 2
3 Unit 3: fundamentals of rock properties 20 26 2 2
Unit 4: oil recovery mechanisms and
4 10 16 2 1
reservoir estimation methods
Unit 5: Enhanced / Improved Oil Recovery
5 15 26 2 2
Methods (EOR/IOR)
Total 75 110 10 08
OBJECTIVES:
Unit-1: some basic concepts and fundamentals of reservoir fluid behavior

1.1 Know about classification of reservoir and reservoir fluids
1.2 Know about temperature diagram
1.3 Know about cricondentherm critical point, phase envelope
1.4 Know about Oil reservoir
1.5 Know about under saturated oil reservoir, saturated oil reservoir
1.6 Know about classification of oil reservoir
1.7 Know about volatile crude oil
1.8 Know about Gas reservoir
1.9 Know about retrograde gas condensate
1.10 Know about undefined petroleum fractions
Unit-2: Reservoir Fluid properties

2.1 Know about properties of natural gases
2.2 Know about behavior of ideal gas
2.3 Know about behavior of real gases
2.4 Know about compressibility of natural gases
2.5 Know about Properties of crude oil systems
2.5 Know about gas formation volume factor
2.6 Know about oil formation volume factor
2.7 Know about isothermal compressibility
2.8 Know about coefficients of crude oil, density
Unit 3: fundamentals of rock properties

3.1 Know about Porosity absolute porosity, effective porosity
3.2 Know about saturation, critical oil saturation
3.3 Know about wettability, surface and interfacial tension
3.4 Know about capillary pressure
111
3.5 Know about average permeability
3.6 Know about rock compressibility
3.7 Know about kilingkernberg effect
3.8 Know about dyskstra-parson permeability variation
3.9 Know about Lorentz coefficient
Unit 4: oil recovery mechanisms and reservoir estimation methods

4.1 Know about Primary recovery mechanisms
4.2 Know about rock and liquid expansion
4.3 Know about the depletion drive mechanism
4.4 Know about drainage- drive mechanism
4.5 Know about secondary gas cap
4.6 Know about ultimate oil recover
4.7 Know about reservoir producing rates
Unit 5: Enhanced / Improved Oil Recovery Methods (EOR/IOR)

5.1 State Enhanced oil recovery (EOR) methods.
5.2 Explain about EOR concepts.
5.3 Know the criteria for application of EOR concepts.
5.4 Explain about water-flooding as a secondary recovery method.
5.5 Explain about Thermal (steam and in-situ combustion) recovery methods.
5.6 Explain about Chemical (alkaline, polymer, surfactant) flooding.
COURSE CONTENT:
Unit 1: some basic concepts and fundamentals of reservoir fluid behavior

Introduction – classification of reservoir and reservoir fluids – pressure- temperature
diagram- cricondentherm, cricondentherm critical point, phase envelope, quality lines, bubble
point curve, dew point curve-Oil reservoir- under saturated oil reservoir, saturated oil
reservoir , gas cap reservoir other classification of oil reservoir- ordinary black oil, low
shrinkage oil, volatile crude oil, near critical crude oil-Gas reservoir- retrograde gas
condensate, near critical gas condensate, wet gas, dry gas, undefined petroleum fractions
Unit 2: Reservoir Fluid properties

Introduction – properties of natural gases – behavior of ideal gas- apparent molecular weight,
standard volume, density, specific volume, specific gravity- behavior of real gases-
compressibility of natural gases – gas formation volume factor- gas viscosity-Properties of
crude oil systems- crude oil gravity- specific gravity of solution gas, gas solubility, bubble
point pressure oil formation volume factor, isothermal compressibility coefficients of crude
oil, density, total formation volume factor viscosity
Unit 3: fundamentals of rock properties

Porosity- absolute porosity, effective porosity, saturation – critical oil saturation, residual oil
saturation, moveable oil saturation, critical gas saturation, critical water saturation, average
saturation, wettability- surface and interfacial tension- capillary pressure- capillary pressure
of reservoir rocks capillary hysteresis, initial saturation distribution in a reservoir- leveret- J
function – converting laboratory capillary pressure data- permeability- kilingkernberg effect,
average permeability- harmonic – average permeability- geometric average permeability ,
absolute permeability correlations- rock compressibility – rock matrix compressibility , rock
bulk compressibility, pore compressibility , net pay thickness- reservoir heterogeneity-
112
vertical heterogeneity, dyskstra-parson permeability variation, Lorentz coefficient , areal
heterogeneity related problems.
Unit 4: Oil recovery mechanisms and reservoir estimation methods

Primary recovery mechanisms- rock and liquid expansion , the depletion drive mechanism,
gas cap drive- degree of conservation of the gas oil production rate- dip angle- water drive
mechanism- gravity – drainage- drive mechanism – reservoir pressure, gas oil ration,
secondary gas cap, water production, ultimate oil recover, permeability in the direction of
dip, dip of the reservoir, reservoir producing rates, oil viscosity , relative permeability
characteristics- the combination drive mechanism
Unit 5: Enhanced / Improved Oil Recovery Methods (EOR/IOR)

EOR concepts and criteria for application-Water-flooding as a secondary recovery method-
Thermal flooding – types of thermal flooding-steam flooding-in-situ flooding-types chemical
flooding methods –alkaline flooding-polymer flooding-surfactant
Text Books:
1. Reservoir engineering volume 1, Tarak Ahmed 2nd edition
2. Enhanced Oil Recovery: Processes and Operations, E. C. Donaldson. G. V. Chilingarian,
T.F. Yew, Elsevier, 1998.
3. Clark, N.J. 1969. Elements of petroleum reservoirs, 2ndEdn. SPE, Texas, USA.
4. Drake, L.P., 1998. Fundamentals of reservoir engineering. Development of petroleum
Science, Elsevier, Amsterdam.
5. Craft, B.C. and Hawkins, F.W. 1959. Applied petroleum reservoir engineering, Prentice
Hall, New Jersey.
113
PETROLEUM REFINING ENGINEERING & PETROCHEMICAL TECHNOLOGY
Subject title : Petroleum Refining Engineering & Petrochemical

Technology
Periods / week : 05
Time schedule
Weightage
S.No. Major Topics Periods SAQ EAQ
Of marks
Petroleum Refining in India, Composition and
1 15 26 2 2
Classification of Crude oil.
Refinery products and Applications of gasoline,
kerosene and aviation turbine fuels, diesel fuels,
2 15 26 2 2
lubricating oils, Petroleum waxes, Bitumen,
Petroleum coke
3 Atmospheric and Vacuum distillation 15 16 2 1
Petrochemical industry
5 Thermal cracking, Coking, Catalytic cracking, 15 26 2 2
Hydro cracking
Naphtha Cracking, Deasphalting, Bitumen and
6 15 16 2 1
carbon black
Total 75 110 10 08
OBJECTIVES:
Upon the completion of the course the students will be able to,
1.0 Petroleum Refining in India, Composition and Classification of Crude oil.

1.1 Know the introduction regarding Energy.
1.2 Know about upstream & downstream activities.
1.3 Know about the exploration activities in India.
1.4 Know the conditions under which crude oil is produced.
1.5 Know about the origin of crude oil.
1.6 Know about the theories that formation of crude oil
1.7 Know about the statistics of crude oil production in India
1.8 Know about various refineries situated in India
1.9 Understand about introduction regarding composition of crude oil
1.10 Know the composition of crude oil
1.11 Know about the introduction regarding the classification of crude oil
1.12 Know about various methods of classification of crude oil
2.0 Refinery products and test methods for gasoline, kerosene and aviation turbine
fuels:
2.1 Know about the spectrum of various refinery products obtained from crude oil and
discuss their boiling range
2.2 Know about the way in which the refinery products can be grouped into various
finished products
2.3 Know about the applications of various refinery products
2.4 Know about the classification of volatile products
2.5 Know the storage facilities regarding LPG
114
2.6 Know about natural gasoline
2.7 Know about composition of natural gasoline
2.8 Know about gasoline
2.9 Know about the applications of gasoline
2.10 Know about kerosene & give its boiling range
2.11 Know about the composition of kerosene
2.12 Know about the properties of kerosene
2.13 Know about aviation turbine fuel & give its boiling range
2.14 Know about the composition of aviation turbine fuel
2.15 Know about the properties of aviation turbine fuel
2.16 Know about diesel fuel & give its boiling range
2.16 Know about the composition of diesel fuel
2.17 Know about the properties of diesel fuel
2.18 Know about lubricating oil & give its boiling range
2.19 Know about the composition of lubricating oil
2.20 Know about the properties of lubricating oil
2.21 Know about types of petroleum waxes
2.22 Know about properties of petroleum wax
2.23 Know about the uses of petroleum wax
2.24 Know about bitumen, its tests, & uses
2.25 Know about petroleum coke, its tests & uses
3.0 Atmospheric and Vacuum distillation:

3.1 Know about introduction of Atmospheric distillation unit & Vacuum distillation unit
3.2 Know about pre-fractionation
3.3 Know about the basic concepts of distillation
3.4 Know about atmospheric distillation unit with the help of a neat sketch
3.5 Know about Vacuum distillation unit with the help of a neat sketch
3.6 Know about steam ejectors to produce vacuum
3.7 Know about the operating conditions of fractionating column
3.8 Know about temperature to be maintained in a fractionating column
3.9 Know about column pressure to be maintained in fractionating column
3.10 Know about flow rate parameters to be maintained in fractionating column
3.11 Know about reflux
3.12 Know about reboiler/condenser/steam stripping
3.13 Know about stability of column operation
4.0 Thermal cracking, Coking, Catalytic cracking, Hydro cracking:

4.1 Know about introduction to Thermal cracking
4.2 Know about the reactions involved in thermal cracking
4.3 Know about the operating conditions required for thermal cracking
4.4 Know about Mechanism of thermal cracking
4.5 Know about different Thermal cracking methods
4.6 Know about introduction regarding coking
4.8 Know about the methods available for coking
4.9 Know the uses of coking
4.11 Know about the introduction regarding catalytic cracking
4.12 Know the mechanism of catalytic cracking
4.13 Know about the operating conditions for catalytic cracking
4.14 Know about the catalysts available for catalytic cracking
4.15 Know the methods available for catalytic cracking
115
4.16 Know about the introduction regarding hydro cracking
4.17 Know about the reactions involved in hydro cracking
4.18 Know about the operating conditions required for hydro cracking
4.19 Know about the catalysts employed for hydro cracking.
4.20 Know the methods available for hydro cracking
5.0 Reforming, Naphtha Cracking, Deasphalting, Bitumen and carbon black:

5.1 Know about introduction regarding reforming
5.2 Know about the reactions and reaction conditions of catalytic reforming
5.3 Know about the catalysts employed for catalytic reforming reactions
5.4 Know about the feed selection for catalytic reforming reactions
5.5 Know the methods of Reforming
5.6 Know about naphtha cracking process with the help of a neat sketch
5.8 Know about Deasphalting using liquid propane
5.9 Know about Bitumen and its manufacturing methods
5.10` Know about carbon black and the methods of manufacture of carbon black
COURSE CONTENT:
1.0 Petroleum Refining in India, Composition and Classification of Crude oil:
Introduction regarding Energy--Upstream & downstream activities--Exploration activities in
India--Conditions under which crude oil is produced--Origin of crude oil--Theories that
formation of crude oil, Inorganic theory of formation of crude oil, Organic theory of
formation of crude oil-- Statistics of crude oil production in India--Various refineries situated
in India --Composition of crude oil,-Introduction regarding the classification of crude oil--
Various methods of classification of crude oil, Classification based on residuum,
Classification based on 0API gravity, Classification based on Characterization factor,
Classification based on viscosity index, Classification based on Co-relation index-- Different
types of crude oils--Introduction regarding the properties of various crude oil..
2.0 Refinery products and applications of crude oil:

Spectrums of various refinery products obtained from crude oil and discuss their boiling
range--Way in which the refinery products can be grouped into various finished products--
Applications of various refinery products--Natural gasoline--Composition of natural gasoline-
Gasoline--Methods of production of gasoline--Applications of gasoline--Kerosene & give its
boiling range--Composition of kerosene--Methods of preparation of kerosene--Properties of
kerosene-Aviation turbine fuel & give its boiling range--Composition of aviation turbine
fuel-Properties of aviation turbine fuel--Additives of aviation turbine fuel-Tests of aviation
turbine fuel-Diesel fuel & give its boiling range--Composition of diesel fuel--Properties of
diesel fuel-- -Lubricating oil & give its boiling range--Composition of lubricating oil--
Properties of lubricating oil-- Types of petroleum waxes--Properties of petroleum wax-- --
Uses of petroleum wax--Bitumen, its tests, & uses--Petroleum coke, its tests & uses.
3.0 Atmospheric and Vacuum distillation::

Atmospheric distillation unit & Vacuum distillation unit--Pre-fractionation--Basic concepts
of distillation--Atmospheric distillation unit with the help of a neat sketch--Vacuum
distillation unit with the help of a neat sketch--Steam ejectors to produce vacuum--Operating
conditions of fractionating column--Temperature to be maintained in a fractionating column--
Column pressure to be maintained in fractionating column --Flow rate parameters to be
maintained in fractionating column—Reflux--Reboiler/condenser/steam stripping--Stability
of column operation.
116
5.0 Thermal cracking, Coking, Catalytic cracking, Hydro cracking:
Thermal cracking-Operating conditions required for thermal cracking--Mechanism of thermal
cracking--Different cracking methods-coking--Methods available for coking-- Delayed
coking with the help of a neat sketch--Fluid coking with the help of a neat sketch--Uses of
coking--Catalytic cracking--Operating conditions for catalytic cracking--Catalysts available
for catalytic cracking-- Methods available for catalytic cracking --Fixed bed catalytic
cracking with the help of a neat sketch--Moving bed catalytic cracking with the help of a neat
sketch--Fluidized bed catalytic cracking with the help of a neat sketch--Hydro cracking--
Reactions involved in hydro cracking--Operating conditions required for hydro cracking--
Catalysts employed for hydro cracking-- Methods available for hydro cracking-- Single stage
process for hydro cracking with the help of a neat sketch--Double stage process for hydro
cracking with the help of a neat sketch--Moving bed process for hydro cracking with the help
of a neat sketch
6.0 Reforming, Naphtha Cracking, Deasphalting, Bitumen and carbon black:

Reforming--Reactions and reaction conditions of catalytic reforming--Catalysts employed for
catalytic reforming reactions--Feed selection for catalytic reforming reactions-- Methods of
reforming-- Catalytic process--Plat forming process of reforming-- Naphtha cracking process
with the help of a neat sketch--Deasphalting using liquid propane--Bitumen and its
manufacturing methods--Carbon black and the methods of manufacture of carbon black
REFERENCE BOOKS:
1. Petroleum Refining Engineering by W.L.Nelson.
2. Modern Petroleum Refining Processes by B.K.Bhaskara Rao.
3. Petroleum Refining Technology, Dr. Ram Prasad.
117
WELL LOGGING AND FORMATION EVALUATION
Subject title : WELL LOGGING AND FORMATION EVALUATION

Periods / week :4
TIME SCHEDULE
Weightage
No. of
Periods
marks
Basic concepts of Well Logging and
1 10 26 2 2
Logging techniques
2 Coring and Core Analysis 10 16 2 1
3 Electric Logging 20 26 2 2
Radio activity and acoustic velocity
4 10 26 2 2
logging
Well logging applications in both open
5 10 16 2 1
and cased holes and advancements
Total 60 110 10 08
OBJECTIVES:
Unit-1: Basic concepts of Well Logging and Logging techniques

1.0 Basic concepts of Well Logging and Logging techniques
1.1 Know the fundamentals of well Logging.
1.2 Know about importance of well logging & State the Logging terminology.
1.3 Explain about Borehole environment, Borehole temperature and pressure.
1.4 Explain about Log header and depth scale.
1.5 Know about the major components of well logging unit and logging setup.
1.6 State the classification of well logging methods.
1.7 Know about wire line, LWD and MWD techniques.
1.8 Know about Log presentation.
1.9 Explain about Log quality control.
Unit-2: Coring and Core Analysis

2.0 Know about Coring Methods
2.1 Know about Core Sampling
2.2 Describe about Core analysis
2.3 Interpretation of Core data.
Unit-3: Electric Logging

3.0 Fundamentals of Resistance and Resistivity
3.1 Know about focused and non-focused resistivity logs
3.2 Know about SP
3.3 Explain about Resistivity Logging
3.4 Know about Induction logging
3.5 Importance and different types of Micro logs.
3.6 Relationship between saturation and resistivity: Archie‘s formula
3.7 Determination of Saturation
118
Unit-4: Radio activity and acoustic velocity logging
4.0 Know about the measurement of natural radioactivity
4.1 Explain about Natural Gamma Ray Spectrometry
4.2 Know about Porosity Logs
4.3 Know about Neutron log
4.4 Know about Density log
4.5 Know about Sonic log
Unit-5: Well logging applications in both open and cased holes and advancements
5.0 Know about Cased hole logs (CBL, VDL, CCL, TDT)
5.1 Know the importance of Caliper Log
5.2 Know about Dipmeter and Image Logs
5.3 Importance of Nuclear Magnetic Resonance Log.
5.4 Determination of Saturation Values.
COURSE CONTENT:
UNIT-1: Basic concepts of Well Logging and Logging techniques
Definition of a Well Log – Importance of Well Logs - Know about importance of well
logging & State the Logging terminology- Borehole environment-Borehole temperature and
pressure - Log header and depth scale-types of open hole logging- Logging Truck - major
components of well logging unit and logging setup - classification of well logging methods -
types of open hole logging – self potential log – caliper log- resistivity log – gamma ray
logging-natural gamma ray log –electrical logging-radio activity logging- sonic log- density
log – neutron logging – cased hole logging- CBL,VBL and CCL – production hole logging-
wire line, LWD and MWD techniques-Log presentation-Log quality control.
UNIT-2: Coring and Core Analysis

Coring and Core Analysis-Coring Methods-Application of Coring-Conventional coring
Diamond coring - Side wall coring –Functions of Core Sampling- Collection of core
Sampling - Core analysis-Application of core analysis–Importance of Interpretation of Core
data--Mud logging unit
UNIT-3: Electric Logging

Electric Logging-Fundamentals of Resistance and Resistivity – Self potential Logging -
focused and non-focused resistivity logs-introduction to resistivity logging-focused resistivity
logging –introduction to lateral log- Importance and different types lateral logs LL-3,LL-
7,and LL-8–resistivity logging-– Various Resistivity Logs – Dual Lateral and Spherical
focused logging tools- micro spherical focused logging - Induction logging - Importance and
different types of Micro logs - Relationship between saturation and resistivity : Archie‘s
formula - Determination of Saturation
UNIT-4: Radio activity and acoustic velocity logging

Radio activity and acoustic velocity logging - measurement of natural radioactivity - Natural
Gamma Ray Spectrometry –introduction and procedure of Porosity Logs- applications of
porosity logging- applications and procedure of Neutron logging with neat sketch –
applications and procedure of density log with neat sketch –application and procedure of
Sonic log neat sketch
UNIT-5: Well logging applications in both open and cased holes and advancements
Well logging applications in both open and cased holes and advancements - Cased hole logs
–introduction and applications of Cased bond log, variable density log- casing collar location
119
– thermal decay time – introduction and procedure of Caliper Log in both open and cased
holes- applications of Caliper log-introduction and applications of Dip meter and Image Logs
– applications of Nuclear Magnetic Resonance Log - Saturation Problems.
TEXT BOOKS:
1. Formation Evaluation, Edward J. Lynch, Harper & Row, 1962.
2. Fundamentals of Well-log interpretation, the acquisition of logging data, O.SERRA,
ELSEVIER
3. Gupta, P.K. and Nandi, P.K. 1994. Well site geological techniques and formation
evaluation – ―A user manual‖, Vol. 1, Exploration business group, ONGC, Dehradun.
4. Well logging and Formation Evaluation, Toby Darling, Elsevier, New York, 2005.
120
HEAT TRANSFER
Subject Title : Heat Transfer

Subject Code : PET- 404
Total periods/ semester : 75
TIME SCHEDULE
S. Major topics No. of Weightage Short Essay

No. periods of marks answer type
type
1. Heat transfer by conduction 11 16 2 1
2. Principles of heat flow in 18 26 2 2
fluids
3. Heat transfer to fluids without 09 13 1 1
& with Phase change
4. Radiation 07 11 2 ½
5. Heat Exchange equipment 12 18 1 1½
6. Evaporation 18 26 2 2
Total 75 110 10 08
OBJECTIVES:
1.0 Know the heat flow through conduction

1.1 Understand the nature of heat flow
1.2 Understand various mechanisms of heat flow such as conduction, convection and
Radiation.
1.3 Define conduction, convection and Radiation.
1.4 Define steady state and unsteady state heat flow
1.5 Explain the Fourier‘s law of heat flow by conduction
1.6 Define and explain thermal conductivity of a substance and state its units.
1.7 Derive and equation for conduction through a single wall, composite wall.
1.8 Derive equation for conduction through cylindrical wall.
1.9 Explain compound resistances in series.
1.10 Explain the significance of lagging and economic lagging thickness.
1.11 Know different heat insulating materials and heating fluids.
1.12 Solve simple problems on calculation of rate of heat flow in case of flat wall,
cylindrical wall and composite walls. Also on finding intermediate temperatures.
2.0 Define convection, natural convection and forced convection.

2.1 Define convection, natural convection and forced convection
2.2 Know the working of heat exchanger.
2.3 Define counter current and parallel current flows in a heat exchanger.
2.4 Understand temperature variations along the length of the exchange in both cases
above.
2.5 Explain enthalpy balances in heat exchangers and in total condensers.
2.6 Explain heat flux, Average temperature of fluid stream.
2.7 Explain logarithmic mean temperature difference (LMTD)
2.8 Know the film concept in heat transfer by convection.
121
2.9 Define and explain the film coefficient (Individual heat transfer coefficient) and
compare it with thermal conductivity.
2.10 Define Nusselt number and Prandtl number
2.11 Derive an equation for calculation of overall coefficients from individual coefficients.
2.12 Explain the Resistance form of overall coefficient.
2.13 Know about fouling factors and their role.
2.14 Solve simple problems on calculation of LMTD and overall coefficients.
3.0 Understand the heat transfer to fluids without and with phase charge.
3.1 Understand regimes of heat transfer in fluids.
3.2 Explain about thermal boundary layer
3.3 Explain the heat transfer by forced convection in laminar flow.
3.4 Define Graetz and Peclet numbers
3.5 Understand the heat transfer by forced convection in turbulent flow.
3.6 Know the various empirical equations used to calculate hi such as
1.Dittus – Boelter Equation 2. Sieder – Tate Equation. 3. Colburn equation.
3.7 know the mechanism of heat transfer from condensing vapors.
3.8 Define and explain dropwise and film type condensation.
3.9 Know the heat transfer mechanism to boiling liquids.
3.10 Explain a pool boiling, nucleate boiling and film boiling.
3.11 Solve simple problems to calculate various numbers and heat transfer coefficient
using various equations.
4.0 Radiation.
4.1 Define absorptivity, Reflectivity and Transmitivity.
4.2 Explain emission of Radiation, Wavelength and emissive power.
4.3 Define black body emmisivity.
4.4 State and Explain Stefan Boltzmann Law, Planck‘s law and Wien‘s displacement law.
4.5 Explain Reflectivity and Absorptivity of opaque solids.
4.6 State and Explain Kirchoff‘s law.
4.7 Know the process of radiation between surfaces.
4.8 Know angle of vision and view factor.
4.9 Understand the combined heat transfer by conduction, convection and Radiation and
explain an equation for it.
4.10. Solve simple problem on Stefan‘s law.
4.11 Solve simple problems on View factor.
5.0 Know the different types of heat exchangers used in Industry.

5.1 Classification of heat exchangers.
5.2 Know the working principle of Double pipe heat exchanger.
5.3 Describe the working principle of a shell and tube heat exchanger in detail with a
neat diagram
5.4 Explain the working principle of a floating head heat exchanger with a neat sketch
5.5 Explain the working principle of a multipass heat exchange.
5.6 Explain temperature patterns in multipass exchanges with sketches.
5.7 Know about the extended surface heat exchangers i.e., i). Fin Type and ii) Plate type
with a neat diagram
5.8 Know the function of a condenser.
5.9 Know about a) Kettle type boilers b) Calandrias with a neat sketch
122
6.0 Evaporation.
6.1 Understand the term evaporation
6.2 Know the different liquid properties considered in evaporation.
6.3 Know the different types of evaporators
6.4 Describe with neat sketches the construction and working of following type of
evaporators.
a) Standard vertical tube evaporator.
b) Falling film and climbing film evaporators.
c) Forced circulation evaporators.
6.5 Know about evaporator accessories
a) Steam traps b) Condensers c) Entrainment separators d) Barometric leg e) Ejectors
f) Salt removal systems.
6.6 Know the performance of an evaporator
6.7 Define and understand the terms economy and capacity of an evaporator.
6.8 State and Explain boiling point elevation, and the effect of hydrostatics head.
6.9 State and Explain Duhring‘s rule.
6.10 Write enthalpy balances for single effect evaporator and understand the equations.
6.11 Know about enthalpy concentration diagram.
6.12 Solve problems on calculation of the heat transfer area and steam requirement and
economy in case of a single effect evaporator.
6.13 Explain the working principle of the multiple effect evaporator system with a sketch.
6.14 State and explain the methods of feeding the Multiple effect evaporator system with
relative advantages and disadvantages
6.15 Explain the capacity and Economy of Multiple effect evaporators.
COURSE CONTENT:
1. Heat transfer and its applications-Heat transfer by conduction-Mechanisms of heat

flow-Fourier‘s law-Thermal conductivity-Steady state conduction- Compound resistances
in series- Heat flow through a Cylinder- Problems.
2. Principles of heat flow in fluids: Typical heat exchange equipment – Counter current
and parallel-current flows – Energy balances –– Average temperature of fluid stream–
LMTD – Individual heat transfer coefficients – Calculation of Overall heat transfer
coefficients from Individual coefficients – Fouling factors – Classification of Individual
heat transfer coefficients and its magnitude – Simple problems.
3. Heat transfer to Fluids without and with phase change: Regimes of heat transfer in
fluids – Thermal boundary layer – Heat transfer by forced convection in laminar flow –
Graetz and Peclet numbers – Heat transfer by forced convection in Turbulent flow –
Empirical equations – Heat transfer from condensing vapors – Drop wise and film wise
condensation – Heat transfer to boiling liquids-pool boiling, nucleate boiling and film
boiling.
4. Radiation Heat transfer: - Fundamentals - Emission of Radiation wave length of
radiation Emissive power – Black body radiation – Emissivities of solids – laws of Black
body radiation – Absorption of radiation by opaque solids – Reflectivity and absorptivity
– Kirchoff‘s law – Radiation between surfaces – Angle of vision – view factor –
combined Heat transfer by conduction – convection and radiation.
5. Heat Exchange equipment: Types of heat exchangers principles and operation of
Double pipe heat exchangers – shell and tube – single, multipass, floating head –
Temperature patterns in multipass exchangers – extended surface heat exchangers – Fin
type and plate type condensers – dehumidifying type – contact condensers –- Heat
insulating materials and heating fluids
123
6. Evaporation. Liquid characteristics – some important properties – Types of evaporators
– standard vertical tube, long tube, falling film – forced circulation evaporators –
evaporator accessories – steam traps – condensers – Entrainment separators – Barometric
leg – Ejectors – salt removal from evaporators. Performance of tubular evaporators –
Evaporator capacity – boiling point elevation and Duhrings rule – Evaporator Economy –
Enthalpy balances for single effect evaporator – Simple problems – Multiple effect
evaporators.
REFERRENCE BOOKS:
1. Unit operations of chemical Engg by Wareen L.Mc Cabe, Julian C.Smith and Peter
Harriott, Fifth edition, Mc Graw Hill Publication.
2. Introduction to Chemical Engg by Walter L.Badger & Julius T.Banchero. Mc GRAW
Hill Publication.
3. Process Heat Transfer by Donald Q. Kern, Mc GRAW Hill Publication.
4. Heat Transfer by D.P. Tiwari, Umesh publications, New Delhi.
124
MASS TRANSFER
Subject Title : Mass Transfer

Subject Code : PET- 405
Periods / Week : 05
TIME SCHEDULE
Weightage Short
No. of Essay
S.No. Major Topics of answer
periods type
Marks type
1 Introduction & Diffusion 10 13 1 1
2 Distillation 15 21 2 1½
3 Absorption & Adsorption 13 21 2 1½
4 Leaching and Extraction 10 13 1 1
Humidification and
5 15 21 2 1½
Membrane separation
6 Drying and Crystallization 12 21 2 1½
Total 75 110 10 08
OBJECTIVES:
After the completion of the subject, the student will be able to,
1.0 Know about mass transfer operations and diffusion:

1.1 Define the mass transfer operation
1.2 Know about the unit process, unit operation
1.3 Know the classification of Mass Transfer operations
1.4 Identify the different terms and symbols involved in different operations.
1.5 Distinguish various mass transfer operations.
1.6 Understand the meaning of equilibrium between phases.
1.7 Understand the process of diffusion
1.8 Explain the process of molecular diffusion with example
1.9 Define Fick‘s First Law of diffusion.
1.10 Explain eddy diffusion.
1.11 Distinguish molecular diffusion and eddy diffusion
1.12 Identify the unit operations that depend on diffusion.
1.13 Know the various fluxes and their units.
1.14 Understand diffusion in single phase.
1.15 Diffusion in gases and liquids for the cases (i) equimolar counter diffusion and (ii)
diffusion of a through non diffusion (Derivations not required).
1.16 Simple problems on molecular gas phase diffusion.
1.17 Understand Interphase mass transfer
1.18 Know the two resistance theory.
1.19 Define mass transfer coefficients.
1.20 Write the relation between individual and overall Mass Transfer coefficient
(Derivations not required).
1.21 Know the phase rule
1.22 Know the concept of ideal stages multistage contact and continuous contact.
125
2.0 Understand distillation
2.1 Define distillation
2.2 Apply phase rule to distillation.
2.3 Define Raoult‘s law, Henry‘s law and ideal solution.
2.4 Define relative volatility and its significance.
2.5 Know about equilibrium and boiling point diagrams.
2.6 Define and explain equilibrium distillation.
2.7 Distinguish between batch distillation and continuous distillation.
2.8 State Rayleigh‘s equation.
2.9 Understand steam distillation.
2.10 Explain the process of continuous distillation with rectification and stripping.
2.11 Discuss Bubble cap and sieve tray columns.
2.12 Analyze the effect of feed conditions and feed plate location.
2.13 Define reflux ratio and explain min and optimum reflux ration.
2.14 State Mc. Cabe Thiele assumptions.
2.15 Determine the no. of stages for a binary mixture using Mc. Cabe – Thiele method.
2.16 Solve problems in distillation and calculation of no. of ideal stages using Mc. Cabe –
Thiele method.
2.17 Define and explain stage efficiency and overall plate efficiency and factors
influencing them.
2.18 Know about constant boiling mixture, high boiling and low boiling azeotropic
mixture.
2.19 Explain the azeotropic distillation and its applications.
2.20 Know about membrane separations
2.21 Understand Reverse osmosis and Electrodialysis
3.0 Understand Absorption and Adsorption:

3.1 Explain absorption and stripping operation.
3.2 Describe absorption towers and tower packings.
3.3 Apply material balances for absorption tower.
3.4 Understand minimum liquid to gas flow rate ratio.
3.5 Know the concept of number of transfer units and HTU.
3.6 Problems based on principles of absorption.
3.7 Understand the gas and liquid velocities in absorption towers and their limitations
such as loading, flooding velocities and channeling.
3.8 Define adsorption with examples
3.9 Understand equilibrium in adsorption.
4.0 Know extraction and leaching

4.1 Application of phase rule to extraction and leaching operations
4.2 Equilibrium relation (Binodal curve) for complete immiscible system.
4.3 Distinguish the process of extraction and leaching.
4.4 Know different examples of leaching.
4.5 Describe single stage and multistage equipment used for extraction and leaching.
4.6 Explain mixer – settler.
4.7 Know the number of stages required for extraction.
5.0 Understand humidification operations

5.1 Define various terms involved in humidification operations
5.2 discuss adiabatic saturation temperature.
126
5.3 Explain the wet bulb and dry bulb temperatures.
5.4 Determine the humidity of a gas system.
5.5 Understand the reading of the psychometric chart.
5.6 Describe the humidification equipment – cooling towers.
5.7 Describe air conditioning.
5.8 Simple problems without using psychrometric chart.
6.0 Understand Drying and Crystallization

6.1 Know the equilibrium relationship in drying operation and apply phase rule to drying
operation.
6.2 Define various terms involved in drying operation.
6.3 Explain batch-drying process under constant drying condition.
6.4 Explain the rate of drying curves and factors influencing.
6.5 Calculate rate of drying and time of drying for batch drying process.
6.6 Classification of driers.
6.7 Know about tray driers, vacuum driers, rotary dryers, drum driers, spray driers,
fluidized bed driers and flash driers.
6.8 Problems on calculation of time drying.
6.9 Define Crystal geometry, nucleation and crystal growth
6.10 Explain the various methods for attaining the super saturation.
6.11 Describe the classification of crystallizers.
6.12 Describe the crystallization equipment.
6.13 Explain caking of crystals, prevention and critical humidity.
COURSE CONTENTS:
1.Mass transfer operation – unit process – unit operation – classification of Mass Transfer
Operations – terms and symbols involved – distinguish various Mass Transfer Operations –
understand equilibrium between phases. Principles of diffusion – molecular diffusion – Fick‘s
first law – eddy diffusion – Distinguish between molecular and eddy diffusions – operations
that depend on diffusion – various fluxes – diffusion in single phase – diffusion in gases and
liquids – Equimolal diffusion – diffusion of ―A‖ through non – diffusing ―B‖ – problems.
Interphase mass transfer – various mass transfer coefficients – relation between individual
and overall Mass Transfer Coefficient – two resistance theory – ideal stage – multistage and
continuous contacts – Phase rule.
2. Application of phase rule to distillation – Raoult‘s law – Henry‘s law – ideal solution –
relative volatility – its significance – equilibrium and boiling point diagrams – equilibrium
distillation – Batch distillation – continuous distillation – Rayleigh‘s equation – steam
distillation – continuous distillation with rectification and stripping – feed conditions reflux
ratio – minimum reflux and optimum reflux ratio – McCabe and Thiele assumptions – Mc.
Cabe & Thiele method – stage efficiency – overall efficiency – factors influencing stage
efficiency – bubble cap and sieve tray columns – constant boiling mixtures – high boiling and
low boiling azeotropic mixture – azeotropic distillation – problems on principles and Mc.
Cabe Thiele method.-- Membrane separations -- Reverse osmosis and Electrodialysis
3.Phase equilibrium in absorption – stripping operation – absorption rower – tower packings

– gas and liquid velocities – limitations – loading and unloading velocities – channeling –
material balance – minimum liquid to gas rate ratio – number of transfer units – HTU –
Problems-.Adsorption—definition – examples – equilibrium – Adsorbants.
127
4.Phase rule applicable to extraction and leaching – Binodal curve – Process of extraction and
leaching examples – single stage and multistage equipments mixer settles – Number of stages
for extraction.
5.Humidification – various terms involved – adiabatic saturation temperature – wet bulb
temperature – dry bulb temperature – humidity – psychrometric chart – humidification
equipment – cooling towers – air conditioning.
6.Drying – equilibrium diagrams – various terms – batch drying – constant drying conditions
– rate of drying curve – factors influencing the rate – time of drying classification of driers –
know different driers – problems.Crystallization – crystal – Crystal growth – methods for
super saturation – classification of crystallizers – equipment – caking of crystals – prevention
– critical humidity – problems.
REFERENCE BOOKS:
1. Mass transfer operations by Robert E. Treybal, McGraw-Hill publication.

2. ‗Unit operations of Chemical Engineering‘ by Warren L. McCabe, Julian C.Smith,
Peter Harriot. Mc. Graw Hill Publication, Fifth Edition
3. Introduction to chemical engineering by Walter L. Badger & Julius T. Banchero,
McGraw-Hill publication
128
RESERVOIR ENGINEERING LAB
Subject title : Reservoir Engineering Lab

Periods / week : 06
1) Determination of Permeability of given Rock sample using Gas Permeameter.

2) Determination of Effective Porosity of given Rock sample by Saturation Method.
3) Determination of Viscosity of Petroleum Oils by Ostwald Viscometer.
4) Determination of Permeability of given Rock sample using Liquid Permeameter.
5) Determination of Specific Gravity of given sample by Hydrometer.
6) Determination of Relative Density of given sample by Pycnometer.
129
MASS TRANSFER LAB
Subject Title : Mass Transfer Lab

Periods / Week :6
1. To draw a graph of specific gravity Vs mole fraction of a given binary system by

Estimating the specific gravities at various compositions.
2. To draw a graph of refractive index Vs mole fraction of a given binary system by taking
the refractive indices at various compositions.
3. Verification of Rayleigh‘s equation by conducting a simple distillation experiment.
4. Verification of the law of steam distillation by conducting steam distillation experiment.
5. Estimation of vapor liquid equilibrium data of a given binary system.
6. Calculation of time of drying of a given material and to draw the rate of drying curve.
7. To draw the Binodal curve for the given ternary liquid system.
8. To estimate the recovery of oil by conducting single stage batch leaching.
9. To estimate the diffusivity for a given system.
10. Evaluation of mass transfer coefficients in surface evaporation
11. Determination of amount of sodium carbonate/ sodium chloride in a mixture with sand
Using water by leaching process.
130
COMMUNICATION SKILLS
Subject title : Communication skills

Periods per week :3
Periods per semester : 45
Introduction :
In the context of globalization , competence in speaking skills is the need of the hour The
gap between the needs of the industry and the curriculum can be bridged by enabling the
students to hone their speaking and listening skills. This course aims at providing
opportunities for practicing speaking.
Time Schedule
Weightage of
Sessional
marks
Sno. Topic Periods Total
marks
(End Exam )
1 Listening I 3
2 Listening II 3 10 10 20
3 Introducing oneself 3
4 Describing objects 3
5 Describing events 3
6 Reporting past incidents 3
Speaking from observation /

7 3
reading 50 30 80
8 JAM 6
9 Group discussion 6
10 Mock interviews 6
6
11 Making presentations
45 60 40 100
Objectives :
On completion of the course the students will be able to
 Strengthen their listening skills

 Strengthen their speaking skills
Competencies and key competencies to be achieved by the student
131
Topic Teacher’s input/ methodology Students competence
Listening I Pre- Listening –eliciting, pictures Identifying the main idea,
Listening II While - Listening Identifying specific details,
Post –Listening –project , writing Identifying parallel and contradictory ideas
Drawing inferences,
Reasoning
Introducing Kinds of introduction --official/ Use of simple present tense,

oneself personal, dynamic vocabulary,
Sequencing,
Body language, Model
introduction, Use of line ups Appropriate vocabulary
Reporting Group work /pair work, Use of past tense,

incidents
Elicit, Relevant vocabulary
Use of past tense,
Student presentations
Describing Vocabulary , Use of adjectives,

objects
Use of adjectives, Dimensions,shapes
Games—I spy, Compare and contrast,
Group presentations Sequence
Describing Group work/pair work Use of appropriate tense,

events
Use of appropriate tense Sequencing
Reporting Use of past tense, Use of past tense , sequencing

past incidents
Vocabulary
Student presentations
Speaking Group work/pair work, Use of past tense,

from
observation/re Reading techniques , Summarising , evaluating, comprehension
ading
132
JAM Effective techniques , Vocabulary,
Good beginning , conclusion, Sequencing,

tips,
Fluency,
Use of line ups
Thinking spontaneously
Group Expressing opinion, body Expressing opinion, agree/ disagree,

discussion language, fluency,Persuasive and leadership skills
Mock FAQs , body language Role play, body language,

interview
Making Student presentations Using charts , pictures, interpreting data,

presentations sequencing,PPTs
Communicative methodology (CLT) should be used to create an interactive class. Apart

from the suggestions given teachers are free to innovate to use any activity to improve the
language competence of students . Attention can also be given to improve the accent and
intonation of students.
Note:
* This subject is a theory subject.
** The workload should be calculated as theory workload.
***Examinations in the subject will be treated as a practical one.
133
HEAT TRANSFER LAB
Subject Title : Heat Transfer Lab

Periods / Week : 03
1. Verification of Fourier‘s law of heat conduction through composite walls.
2. Verification of Fourier‘s law of heat conduction and determination of thermal
Conductivity of a metal bar.
3. Determination of overall heat transfer co-efficient in a double pipe heat exchanger for
Counter flow.
4. Determination of overall heat transfer co-efficient in a double pipe heat exchanger for
Parallel flow.
5. Determination of overall heat transfer co-efficient in a shell and tube heat exchanger
for Counter flow.
6. Determination of overall heat transfer co-efficient in a shell and tube heat exchanger
for Parallel flow.
7. Determination of heat transfer co-efficient for forced convection of air.
8. Determination of heat transfer co-efficient for natural convection of air.
9. Determination of Stefan Boltzmann constant.
10. Determination of Emissivity of a test plate.
134
V SEMESTER
135
(V Semester)
C-16 Curriculum
Instruction
Scheme Of
Total Periods Per

Examinations
Periods/Week
Semester
End Exam
Sessional
Duration
Practical
Theory
Marks
Marks
Marks
Total
(hrs)
THEORY SUBJECTS
Industrial Management and Smart
PET-501 5 - 75 3 20 80 100
Technologies
PET-502 Instrumentation & Process Control 5 - 75 3 20 80 100
PET-503 Thermodynamics 4 - 60 3 20 80 100
PET-504 HSE & FF in Petroleum Industry 5 - 75 3 20 80 100
PET-505 Oil & Gas Production Engineering 5 - 75 3 20 80 100
PRACTICAL SUBJECTS
Petroleum Equipment Design &
PET-506 - 6 90 3 40 60 100
Simulation Lab
PET-507 Instrumentation & Process Control Lab - 3 45 3 40 60 100
PET-508 Life Skills - 3 45 3 40 60 100
PET-509 Reservoir Simulation Lab - 6 90 3 40 60 100
Total 24 18 630 260 640 900
PET-503, 504, 505, 506, 508 : Not common with any course
PET-502, 507 : Common with DCHE
PET-501, 509 : Common to all
136
Industrial Management & Smart Technologies
Subject Title : Industrial Management & Smart Technologies
Periods/Week : 5
Period/Semester : 75
TIME SCHEDULE
Weightage
Short Essay
S. No.
Periods Of Answer Type
Major Topics
Questions Questions
Marks
1. Basics of Industrial Management 06 13 1 1
Organisation structure & 10 1/2
2. 18 1 1
Organisational behaviour
1/2
3. Production Management 10 18 1 1
4. Materials Management 08 13 1 1
Maintenance management & 08
5 13 1 1
Industrial Safety
6 Entrepreneurship Development 08 13 1 1
7 Total Quality Management 05 06 2
8 Smart technologies 20 16 2 1
Total 75 110 10 08
1. Basics of Industrial Management
On completion of the course the student will be able to

1.0 Understand the principles of management as applied to industry.
1.1 Define industry, commerce (Trade) and business.
1.2 Know the need for management.
1.3 Understand the evolution of management
1.4 Understand functions of Management.
1.5 Explain the principles of scientific management.
1.6 Explain the principles of management.
1.7 Differentiate between management and administration.
1.8 Understand the nature of management as a profession
1.9 Differentiate between supervisory, middle and Top level management
1.10 Explain the importance of managerial skills (Technical, Human, Conceptual)
2. Organisation Structure & organisational behaviour
Know types of ownerships, the organisation structure of an industry and the behaviour of an
individual in an organisation.
2.1 Understand the philosophy and need of organisation structure of an industry.

2.2 Understand the line, staff and Functional organisations
2.3 Understand the Authority and Responsibility Relationships
2.4 Understand the differences between Delegation and decentralization
2.5 Explain the factors of effective organisation.
2.6 Outline the communication process
2.7 State motivation theories.
2.8 State Maslow‘s Hierarchy of needs.
2.9 List out different leadership models.
137
2.10 Explain the trait theory of leadership.
2.11 Explain behavioural theory of Leadership.
2.12 Explain the process of decision making.
2.13 Assessing Human resource requirements
2.14 Know the concept of Job analysis, Job description and specifications
2.15 Understand the process of recruitment, selection, training and development
2.16 Understand types of business ownerships
2.17 Differentiate between the business ownerships
2.18 Know the objectives of Employee participation
2.19 Understand the meaning and definition social responsibilities
2.20 Corporate social responsibility
3. Production management
Understand the different aspects of production management.
3.1 Identify the factors of Plant Location

3.2 Know the objectives of plant Layout
3.3 Understand the principles of plant Layouts
3.4 Explain the types of plant Layouts
3.5 Relate the production department with other departments.
3.6 State the need for planning and it‘s advantages.
3.7 Explain the stages of Production, planning and control.
3.8 Know the basic methods demand forecasting
3.9 Explain routing methods.
3.10 Explain scheduling methods.
3.11 Explain dispatching.
3.12 Explain Break Even Analysis
3.13 Define supply chain Management, competitive strategy, Supply chain strategy
3.14 Draw PERT/CPM networks.
3.15 Identify the critical path
4. Materials Management
Understand the role of materials management industries.
4.1 Explain the importance of materials management in Industry.

4.2 Know Functions of Materials Management
4.3 Derive expression for inventory control.
4.4 Explain ABC analysis.
4.5 Define safety stock.
4.6 Define reorder level.
4.7 Derive an expression for economic ordering quantity.
4.8 Know the functions of Stores Management,
4.9 Explain types of store layouts.
4.10 List out stores records.
4.11 Explain the Bin card.
4.12 Describe Cardex method.
4.13 Explain general purchasing procedures
4.14 Explain tendering, E-tendering and E-procurement procedures
4.15 List out purchase records.
4.16 Know the applications of RFID (Radio Frequency Identification Device)
4.17 Understand the applications of RFID in material management
5. Maintenance Management & Industrial Safety
Comprehend the Importance of Maintenance Management & Safety procedures

5.1 Explain the importance of maintenance management in Industry.
5.2 Know the Objectives of maintenance management
5.3 Know the activities of maintenance management
138
5.4 Understand the importance of Preventive maintenance
5.5 Understand the need for scheduled maintenance
5.6 Differentiate between scheduled and preventive maintenance
5.7 Know the principles of 5 s for good house keeping
5.8 Explain the importance of safety at Work place.
5.9 List out the important provisions related to safety.
5.10 Explain hazard and accident.
5.11 List out different hazards in the Industry.
5.12 Explain the causes of accidents.
5.13 Explain the direct and indirect cost of accidents.
5.14 Understand the types of emission from process Industries, their effects on
environment and control
5.15 Understand the principles of solid waste management
6. Entrepreneurship Development.
Understand the role of entrepreneur in economic development and in improving the quality of
life.
6.1 Define the word entrepreneur.

6.2 Explain the requirements of an entrepreneur.
6.3 Determine the role of entrepreneurs in promoting Small Scale Industries.
6.4 Describe the details of self-employment schemes.
6.5 Characteristic of successful entrepreneurs
6.6 Explain the method of site selection.
6.7 List the financial assistance programmes.
6.8 List out the organisations that help an entrepreneur
6.9 Know the use of EDP Programmes
6.10 Understand the concept of make in India, Zero defect and zero effect
6.11 Understand the importance for startups
6.12 Explain the conduct of demand surveys
6.13 Explain the conduct of a market survey
6.14 Evaluate Economic and Technical factors.
6.15 Prepare feasibility report study
7. Total Quality Management:
Understand the concepts adopted in total quality management
7.1 Explain the concept of quality.

7.2 List the quality systems and elements of quality systems.
7.3 State the principles of quality Assurance.
7.4 Understand the basic concepts of TQM
7.5 Know the Pillars of TQM
7.6 List the evolution of ISO standards.
7.7 Explain ISO standards and ISO 9000 series of quality systems.
7.8 List the beneficiaries of ISO 9000.
7.9 Explain the concepts of ISO 14000
7.10 Know the overview of PDCA cycle
8. Smart Technologies
8.1 Get an overview of IoT
8.1.1 Define the term IoT
8.1.2 Know how IoT work
8.1.3 List the key features of IoT
8.1.4 List the components of IoT : hardware, software, technology and protocols
8.1.5 List the advantages and disadvantages of IoT
8.2 IoT Applications
8.2.1 Smart Cities
139
8.2.2 Smart Energy and the Smart Grid
8.2.3 Smart Transportation and Mobility
8.2.4 Smart Home, Smart Buildings and Infrastructure
8.2.5 Smart Factory and Smart Manufacturing
8.2.6 Smart Health
8.2.7 Food and Water Tracking and Security
8.2.8 Social Networks and IoT
Course Content
1. Basics of Industrial Management

Introduction: Industry, Commerce and Business; Definition of management; Characteristics of
management; Functions of management - Planning, Organizing, Staffing, Directing, Co-
ordination, Controlling, Motivating, Communication, Decision Making; Principles of scientific
management: – F.W.Taylor, Principles of Management: Henry Fayol; Administration and
management; Nature of management; levels of management; managerial skills;
2. Organisation Structure & organisational behaviour

Organizing - Process of Organizing; Line/Staff and functional Organizations, Decentralization
and Delegation, Effective Organizing; Communication, Motivational Theories; Leadership
Models; Human resources development; Forms of Business ownerships: Types – Sole
proprietorship, Partnership, Joint Stock Companies, Cooperative types of Organizations;
Employee participation in management; Corporate Social responsibility;
3. Production management
Definition and importance; Plant location and layout; Types of production -job, batch and
mass; production Planning and Control: Demand forecasting, routing, scheduling, dispatching
and follow up; Break even analysis; Supply chain Management (Definition, Competitive
strategy Vs Supply chain Strategy, Supply chain drivers); Project scheduling; Application of
CPM and PERT techniques; simple numerical problems;
4. Materials Management
Materials in industry, Basic inventory control model, ABC Analysis, Safety stock, re-order
level, Economic ordering quantity, Stores Management: Stores layout, stores equipment,
Stores records, purchasing procedures, e-tendering, e-procurement; purchase records, Bin
card, Cardex RFID (Radio Frequency Identification Device)application in materials
management;
5. Maintenance Management & Industrial Safety

Objectives and importance of plant maintenance, Different types of maintenance, Nature of
maintenance problems, Range of maintenance activities, Schedules of preventive
maintenance, Advantages of preventive maintenance, 5 S principles; Importance of Safety at
work places; Causes of accidents-psychological, physiological and other industrial hazards;
Domino sequence; methods of promoting safe practices; Pollution control in process
industries; Introductory concepts on Solid waste management ( General introduction including
definitions of solid waste including municipal, hospital and industrial solid waste, Waste
reduction at source – municipal and industrial wastes)
6. Entrepreneurship Development.
Definition of Entrepreneur; Role of Entrepreneur; Concept of Make In India, ZERO defect,
Zero Effect, Concept of Start-up Company, Entrepreneurial Development: Role of SSI,
MSME, DICs, Entrepreneurial development schemes; Institutional support, financial
assistance programmes; Market survey and Demand survey; Preparation of Feasibility study
reports
7. Total Quality Management:

Total Quality Management (TQM)- Concept of quality discussed by B. Crosby W. Edward,
Deming, Joseph M. Juran, Kooru Ishikawa, Genichi Taguchi, Shigco Shingo. Quality systems
– Definitions of the terms used in quality systems like, quality policy, quality management,
quality systems, Stages of development of ISO 9000 series , ISO-14000, Deming's PDCA
140
Cycle (Plan, Do, Check and Action). Japanese Quality Management, culture, Kaizen Strategy
(continuous improvement).
8. Smart Technologies :
Overview of IoT - Define IoT, how IoT work, key features of IoT, components of IoT :
hardware, software, technology and protocols, advantages and disadvantages of IoT - IoT
Applications - Smart Cities, Smart Energy and the Smart Grid, Smart Transportation and
Mobility, Smart Home, Smart Buildings and Infrastructure, Smart Factory and Smart
Manufacturing, Smart Health, Food and Water Tracking and Security, Participatory Sensing,
Social Networks and IoT.
REFERENCE BOOKS
1. Industrial Engineering and Management -by O.P Khanna

2. Production Management- by Buffa.
3. Engineering Economics and Management Science - by Banga & Sharma.
4. Personnel Management by Flippo.
5. Production and Operations Management –S.N. Chary
6.
Converging_Technologies_for_Smart_Environments_and_Integrated_Ecosystems_IERC_B
ook_ Open_Access_2013 pages-54-76
7. Supply Chain Management –Sunil Chopra and Meindl, PHI publishers
8 5 S made easy by David Visco
141
INSTRUMENTATION & PROCESS CONTROL
Subject title : Instrumentation & Process Control

Periods per semester : 75
TIME SCHEDULE
Major Topics Periods Weightage SAQ EAQ

S.No.
Of marks
Introduction and Qualities of
1. 8 13 1 1
measurement
2. Measurement of Temperature 12 23 1 2
Measurement of pressure and

3. 10 16 2 1
Vacuum:
Measurement of Liquid level,
4. Density and Viscosity. 10 13 1 1
5. Measurement of composition. 10 13 1 1
Process Instrumentation &
Instrumentation diagrams for
6. 10 16 2 1
Chemical Engineering
processes and operations:
Principles of automatic process
7. control and modes available 15 16 2 1
for process control.
Total 75 110 10 8
OBJECTIVES:
Unit-1: Introduction and Qualities of measurement
1.0 Know the importance of Instrumentation and process control in Chemical

Industries.
1.1 Know the meaning of measurement.
1.2 Know the differences between direct and in-direct measurement.
1.3 Know about different elements of an instrument.
1.4 Know about the Static characteristics of an instrument.
1.5 Know about the Dynamic characteristics of an instrument.
1.6 Know about a First order system and physical examples of first order system.
1.7 Know about a Second order system and physical examples of second order
system.
1.8 Know about various input functions like Step input, Impulse input, Sinusoidal
input and Linear input.
142
1.9 Know about the response of a first order system for a given input functions
with derivations.
1.10 Know about the parameters that characterize a first order system and a second
order system.
Unit-2: Measurement of Temperature

1.1 Know about different temperature scales in different units.
1.2 Know about Principle, construction and working of expansion thermometers.
1.3 Know about Vapor actuated thermometer.
1.4 Know about the sources of static error in industrial pressure spring
thermometers.
1.5 Know about thermo-electricity and thermo-electric circuit or Thermocouple.
1.6 Know about Seebeck effect, Pelteir effect and Thomson effect.
1.7 Know the types of industrial thermocouples.
1.8 Know about the accessories of an industrial thermocouple.
1.9 Know the mechanical properties of thermal well materials.
1.10 Know the effect of location of reference junction and lead wires for a
thermocouple.
1.11 Know about the principle, construction, working of Milli-voltmeter and its
application.
1.12 Know about the principle, construction, working of Null Potentiometer circuit
and its and its application.
1.13 Know about temperature coefficient of resistance.
1.14 Know about industrial resistance thermometer bulbs.
1.15 Know about resistance thermometer elements.
1.16 Know about thermal wells and lead wires for resistance thermometers.
1.17 Know the indicating elements of industrial resistance thermometers like
1.18 Wheat stone bridge circuit and Modified wheat stone bridge circuit also
known as ―Callender Griffith circuit‖.
1.19 Know about radiation temperature measurement.
1.20 Know about radiation receiving elements.
1.21 Know the types of radiation pyrometers.
1.22 Know about Optical pyrometer and its principle, construction and working.
Unit-3: Measurement of pressure and Vacuum:

3.1 Know the basic concepts of pressure measurement.
3.2 Know different types of pressures.
3.3 Know about different types of liquid column manometers, their principle
construction and working.
3.4 Know different types of pressure measuring elements.
3.5 Know the mechanical indicating elements.
3.6 Know about inductance coil method of an indicating element.
3.7 Know about resistance rod indicating element.
3.8 Know about electric pressure gauge of indicating element.
3.9 Know about different types of vacuum gauges.
Unit-4: Measurement of Liquid level, Density and Viscosity.
4.1 Know the principle construction and working of liquid level method of
measuring density.
4.2 Know the direct methods of liquid level measurement.
4.3 Know the principle construction and working of bubbler system for
measurement of liquid level.
143
4.4 Know the level measurement in pressure vessels.
4.5 Know about principle construction and working of displacement float liquid
level system.
4.6 Know about principle construction and working of pneumatic balance
displacement float liquid level system.
4.7 Know the basic concepts for measuring density.
4.8 Know the principle construction and working of displacement-meter for
measuring density by republic flow-meter Company.
4.9 Know the principle construction and working of hydrometer for density
measurement.
4.10 Know the basic concept of viscosity measurement.
4.11 Know the principle construction and working of viscosity measurement by
Viscosity meter-Brabender Corporation.
4.12 Know the principle construction and working of viscosity measurement by
Continuous Viscosity meter.
Unit-5: Measurement of composition.

5.1 Know the determination of gas analysis by thermal conductivity method.
5.2 Know the determination of moisture content in gases by Psychrometer.
5.3 Know the determination of moisture in Paper and Lumber.
5.4 Know the determination of PH of a solution by PH cell (Measuring cell &
Calomel cell) method.
5.5 Know about Spectroscopic methods of analysis
Unit-6: Process Instrumentation & Instrumentation diagrams for Chemical

Engineering processes and operations:
6. Know about recording instruments used for process instrumentation.
7. Know about indicating and signaling instruments.
8. Know about control center.
9. Know about signal conversion devices.
10. Know about the instrumentation diagrams.
11. Know about the instrumentation diagram for a distillation column.
12. Know about the instrumentation diagram for an evaporator.
13. Know about the instrumentation diagram for a reactor.
14. Know about the instrumentation diagram for extractor
Unit-7: Principles of automatic process control and modes available for process control.
7.1 Know about a simple automatic process control.
7.2 Know about components of a control system.
7.3 Know about types of control systems.
7.4 Know the basic nomenclature associated with a control system.
7.5 Know about control actions.
7.6 Know the expressions for the transfer function for the proportional control,
Proportional-Derivative, Proportional-Integral, Proportional-Integral-
Derivative control actions.
7.7 Know about the components of a hydraulic system.
7.8 Know about the construction, working of a hydraulic system incorporated
with Proportional, Proportional-Integral, Proportional-Derivative and
Proportional-Integral- Derivative control action.
7.9 Know about the components of a pneumatic system.
144
7.10 Know about the construction, working of a Pneumatic system incorporated
with Proportional, Proportional-Integral, Proportional-Derivative and
Proportional-Integral- Derivative control action.
7.11 Know about Control valve, its components, working and characteristics.
7.12 Know about the basic functioning of programmable logic control and
Distributive control system.
COURSE CONTENT:
Unit-1: Introduction and Qualities of measurement

Importance of instrumentation --Meaning of measurement - Different elements of an
instrument - Static characteristics of an instrument - Dynamic characteristics of an instrument
- First order system and physical examples - Second order system and physical examples of
second order system -Various input functions like Step input, Impulse input, Sinusoidal input
and Linear input
Unit-2: Measurement of Temperature.

Different temperature scales in different units—Principle, working and working of expansion
thermometers like Mercury in glass thermometer, Bi-metallic thermometer and Pressure
spring thermometer - Vapor actuated thermometer--Sources of static error in industrial
pressure spring thermometers - Thermo-electricity and thermo-electric circuit or
Thermocouple - Accessories of an industrial thermocouple - Milli-voltmeter and its
application - Null Potentiometer circuit and its and its application - Resistance thermometer
elements - Wheat stone bridge circuit and Modified wheat stone bridge circuit -Radiation
temperature measurement - Radiation receiving elements - construction and working -
Optical pyrometer and Radiation pyrometer.
Unit-3: Measurement of pressure and Vacuum:

Basic concepts of pressure measurement - liquid column manometers - pressure spring gauge,
Bellow pressure element, Diaphragm element, Differential pressure indicating manometer,
Bell differential pressure gauge--Mechanical indicating elements, Principle, working and
construction of Pressure tight shaft and torque tube shaft--Principle, construction and working
of inductance coil method of an indicating element--Principle, construction and working of
resistance rod indicating element--Principle construction and working of electric pressure
gauge of indicating element--Principle construction and working of different types of vacuum
gauges like Mc-leod vacuum gauge, Pirani vacuum gauge, Thermocouple vacuum gauge,
Thermionic type ionization vacuum gauge.
Unit-4: Measurement of Liquid level, Density and Viscosity:

Basic concepts for measuring density--Principle construction and working of displacement-
meter for measuring density by republic flow-meter Company--Principle construction and
working of hydrometer for density measurement--Principle construction and working of
liquid level method of measuring density--Direct methods of liquid level measurement, Float
and tape liquid level system, Hydraulic remote transmission of liquid level system--Principle
construction and working of bubbler system for measurement of liquid level--Level
measurement in pressure vessels, Principle construction and working of differential pressure
manometer for measuring liquid level in pressure vessels-- Principle construction and
working of displacement float liquid level system--Principle construction and working of
pneumatic balance displacement float liquid level system--Basic concepts of viscosity
measurement--Principle construction and working of viscosity measurement by Viscosity
145
meter-Brabender Corporation--Principle construction and working of viscosity measurement
by Continuous Viscosity meter.
Unit-5: Measurement of composition:

Gas analysis by thermal conductivity method--Determination of moisture content in gases by
Psychrometer--Determination of moisture in Paper and Lumber--Determination of PH of a
solution by PH cell (Measuring cell & Calomel cell) method--Spectroscopic analysis methods,
Absorption spectroscopy, Emission spectroscopy, Mass spectroscopy
Unit-6: Process Instrumentation & Instrumentation diagrams for Chemical

Engineering processes and operations:
Recording instruments used for process instrumentation, Circular recording chart and
concentric indicating scale, Strip recording chart and linear indicating scale, Multi-record
recorder-- Indicating and signaling instruments, Eccentric scale indicator, Concentric
indicating scale--Control center--Signal conversion devices, Transducer, Amplifier--
Instrumentation diagrams--Instrumentation diagram of Control schemes for heat exchangers--
Instrumentation diagram for a distillation column--Instrumentation diagram for an
evaporator--Instrumentation diagram for a reactor, Instrumentation diagram for extractor.
Unit-7: Principles of automatic process control and modes available for process control.
Simple automatic process control system--Components of a control system, Process,
measuring element, Controller, Comparator, Final control element, Types of control systems,
Feedback control system or closed loop control system - Feed forward control system (Open
loop control system)--Basic nomenclature associated with a control system, Load, Controlled
variable, set point, error, measured variable, manipulated variable, Proportional gain,
Proportional band, Offset--Control actions, Proportional control action, Integral control
action, Derivative control action, Proportional-Integral control action, Proportional-
Derivative control action, ON-OFF Control action, Proportional-Integral-Derivative control
action--Expressions for the transfer function for the proportional control, Proportional-
Derivative, Proportional-Integral, Proportional-Integral-Derivative control actions-- Know
about the components of a hydraulic system--Construction, working of a hydraulic system
incorporated with Proportional, Proportional-Integral, Proportional-Derivative and
Proportional-Integral-Derivative control action--Components of a pneumatic system,
Construction, working of a Pneumatic system incorporated with Proportional, Proportional-
Integral, Proportional-Derivative and Proportional-Integral-Derivative control action--Control
valve, its components, working and characteristics-- Basic functioning of programmable logic
control and Distributive control system.
REFERENCE BOOKS:
1. Industrial Instrumentation by Donald P. Eckmann

2. Industrial Instrumentation & Control by S K Singh.
3. Process systems analysis & Control by Donald R. Coughanowr.
4. Chemical Process Control by George Stephanopoulos.
5. Process Control by Peter Harriot.
6. Instrumentation & Process Measurements by W Bolton.
146
THERMODYNAMICS
Subject Title : Thermodynamics

Priods per week : 04
TIME SCHEDULE
Short
No. of Weightage Essay
S. No. Major topics answer
periods Of Marks type
type
1. Introduction, First law and Basic
10 16 2 1
concepts of thermodynamics
2. Volumetric properties of pure fluids 15 26 2 2
3. The second law of thermodynamics 15 26 2 2
4. Refrigeration and Liquefaction 10 26 2 2
5. Introduction to Topics in phase
10 16 2 1
Equilibrium
Total 60 110 10 08
OBJECTIVES:
Unit 1: Introduction and First law of thermodynamics

1.0 Introduction and First law of thermodynamics.
1.1 Know the scope of thermodynamics.
1.2 Define internal energy, enthalpy and their units in SI system
1.3 Know the statement for 1st law of thermodynamics.
1.4 Derive an expression of first law of thermodynamics for the following processes:
a) Closed process
b) Steady state flow process.
1.5 Differentiate between state and path functions.
1.6 Understand extensive and intensive properties.
1.7 Define heat capacity and specific heat
1.8 Know the relation of constant volume and constant pressure processes
1.9 State and explain (a) Equilibrium (b) Reversible process.
Unit 2: Volumetric properties of pure fluids

2.0 Know about properties of pure fluids
2.1 Know the PVT behavior of pure substances.
2.2 Define ideal gas; know the characteristics of ideal gas.
2.3 Define compressibility factor and know about compressibility Charts.
2.4 Cubic Equation of state (a) Vanderwaal‘s equation (b) Redlich Knowng‘s Equation
2.5 Derive Cp – Cv = R for a mole of an ideal gas.
2.6 State and explain about the following processes.
(a) Isochoric (b) Isobaric c) Isothermal and d) Adiabatic.
2.7 Derive different expression for U, H, Q and W for (a) Isochoric (b) Isobaric
c) Isothermal and d) Adiabatic processes connecting PVT properties.
2.8 Solve problems on calculation of U, H, Q and W in the above processes Connecting
PVT Properties.
Unit 3: The second law of thermodynamics
3.1 Know the statements of second law of thermodynamics.
147
3.2 Distinguish between heat engine and heat pump.
3.3 Know the schematic representation of heat engine and heat pump.
3.4 Define cop in heat engine and heat pump.
3.5 Know the thermodynamic temperature scales
3.6 Know Carnot cycle principle
3.7 Derive thermodynamic temperature and the ideal gas scale.
3.8 State and explain Carnot cycle principle.
3.9 Define entropy and its SI units.
3.10 Know the entropy characteristics.
3.11 Know the entropy changes of an ideal gas.
3.12 Know the mathematical statement of 2nd law of thermodynamics
3.13 Solve simple problems on adiabatic mixing
3.14 State third law of thermodynamics.
3.15 Know the property relations for homogeneous phases
(a) H=U+PV (b) A=U-TS (c) G=H-TS (d) Fundamental property relations (e)
Maxwell‘s equations
Unit 4: Refrigeration and Liquefaction.

4.1 Define refrigeration.
4.2 Explain the cycle of refrigeration.
4.3 Know about various methods of refrigeration.
4.4 Know about various applications of refrigeration.
4.5 Define refrigerant.
4.6 Know about classification of refrigerants (primary and secondary).
4.7 Know the principle of Carnot cycle refrigerator.
4.8 Know about choice of refrigerant.
4.9 Explain the method of obtaining vapor compression refrigeration.
4.10 Explain the method of obtaining vapor absorption refrigeration.
4.11 Solve simple problems on refrigeration capacity, COP on refrigeration
4.12 Know about liquefaction
4.13 State various methods of liquefaction
4.14 Explain Linde liquefaction process
4.15 Explain Claude liquefaction process
UNIT-V: Introduction to Topics in phase Equilibrium

5.1 Know about Equilibrium and stability,
5.2 Know about liquid-liquid equilibrium (LLE),
5.3 Know about vapor- liquid–liquid equilibrium (VLLE)
5.4 Know about solid-liquid equilibrium (SLE)
5.5 Know about solid vapor equilibrium (SVE)
COURSE CONTENT:
1. Introduction and First law of thermodynamics.
The scope of thermodynamics- Internal energy –enthalpy- Formulation of first law –closed
process –First law for Steady state flow process – State functions and path functions- heat
capacity and specific heat- Constant volume and constant pressure processes - Equilibrium –
Reversible process.
2. Volumetric properties of pure fluids.

PVT behavior of pure substances – Ideal gas ––Definition of compressibility factor-cubic
equation of state-Vanderwaal‘s equation, Redlich Kwong equation-derivation of Cp – Cv = R
148
for a mole of an ideal gas-State and explain about the following processes : a) Isochoric b)
Isobaric c) Isothermal and d) Adiabatic.- different expressions for U, H, Q and W for the
above processes connecting PVT properties- Problems on calculation of U, H, Q and W
in the above processes
3. The second law of thermodynamics:

Statements of second law – The heat engine and heat pump- Carnot principle-thermodynamic
temperature scales- Carnot cycle for an ideal gas – Entropy – Entropy changes of an ideal gas
– Mathematical statement of the second law – The third law of thermodynamics, Statement -
property relations for homogeneous phases-enthalpy, Helmholtz energy, Gibb‘s energy –
fundamental property relations-Maxwell‘s equations—Problems on entropy and adiabatic
mixing.
4. Refrigeration and Liquefaction:

The Carnot refrigerator – Vapor –Compression cycle – Comparison of refrigeration cycles –
Refrigerants – Choice of refrigerant –Absorption refrigeration – Heat pump-Liquefaction-
Linde liquefaction- Claude liquefaction process
5. Topics in phase Equilibria: Equilibrium and stability, liquid-liquid equilibrium

(LLE), vapor- liquid–liquid equilibrium (VLLE), solid-liquid equilibrium
(SLE), solid vapor equilibrium (SVE),
REFERENCE BOOKS:
1. Introduction to Chemical Engineering Thermodynamics – by Smith and Vannes, 4th

Edition.
2. Chemical reaction Engineering – by Octave Levenspiel, 2nd edition.
3. Introduction to Chemical Reaction Engineering – by K.A. Gavane, Nirali Publications.
4. Chemical Kinetics – by J.M. Smith.
149
HSE & FF IN PETROLEUM INDUSTRY
Subject title : HSE&FF IN PETROLEUM INDUSTRY

Periods / week : 05
TIME SCHEDULE
No. of Weightage
S.No. Major Topics SAQ EAQ
Periods Of marks
Unit 1: Introduction to environmental control in
1 15 26 2 2
the petroleum industry
Unit 2: The impact of drilling and production
2 20 26 2 2
operations
Unit 3: Petroleum Wastes-Environmental
3 15 26 2 2
Transport surface paths
Unit 4: Introduction, The Fire Process and
4 10 16 2 1
Chemistry of Fire
5 Unit 5: Methods of Fire Suppression 15 16 2 1
75 110 10 08
OBJECTIVES:
Unit-1: Introduction to environmental control in the petroleum industry

1.0 Explain introduction to environmental control in the petroleum industry.
1.1 Understand the overview of environmental issues- A new attitude.
1.2 Explain environmental issue during Drilling operations.
1.3 Explain environmental issues during production operations.
1.4 State hazardous emissions during Drilling.
1.5 State hazardous emissions during Production of crude oil.
1.6 State air emissions and their impact on environment.
Unit-2: The impact of drilling and production operations

2.0 Understand the impact of drilling and production operations.
2.1 State various methods of measuring toxicity during drilling and production
Operations.
2.2 State the toxicity levels in Hydrocarbons, Salt, Heavy metals obtained during
production of crude oil.
2.3 State various production chemicals employed during drilling operations.
2.4 Know about various Drilling fluids.
2.5 Know about produced water.
2.6 Know about nuclear radiation in drilling activities.
2.7 Know about air pollution impact during drilling activities.
2.8 Know about Acoustic impacts during drilling activities.
2.9 Know the effects of offshore platforms.
2.10 Know about the risk assessment during drilling activities.
Unit-3: Petroleum Wastes-Environmental Transport surface paths

3.0 Know about planning for environmental protection.
150
3.1 Know about environmental audits.
3.2 Know about Waste management plans.
3.3 Know about Waste management actions.
3.4 Know about Certification of disposal processes.
3.5 Know about Contingency plans.
3.6 Know about different aspects of Employee training.
3.7 State various Waste treatment methods.
3.8 Explain about treatment of water.
3.9 Explain about treatment of solids.
3.10 Explain about treatment of air emissions.
3.11 State various Waste disposal methods.
3.12 Explain about Surface disposal.
3.13 Explain about Subsurface disposal.
3.14 Know about Remediation of contaminated sites.
3.15 Know about Site assessment.
3.16 Explain about Remediation processes.
Unit-4: Introduction, the Fire Process and Chemistry of Fire

4.0 Introduction to Fire Fighting.
4.1 Know about Fire Losses.
4.2 Know about Fire Causes.
4.3 Know about Fire Protection Standards and practice.
4.4 Know about Fire Triangle.
4.5 Know about Fuels.
4.6 Know about Ignition.
4.7 Know about Fire Stages.
4.8 Know about Energy in Chemical Reactions.
4.9 Know about Flammability Limits and Flammable Range.
4.10 Know about Flash Point, Fire Point, Ignition Point, and Ignition Energy.
Unit-5: Methods of Fire Suppression

5.0 Introduction of Fire Suppression.
5.1 Know about Fire Extinguishers.
5.2 Know about Water Suppression Systems.
5.3 Know about Firewater Distribution Systems.
5.4 Know about Water Deluge Systems.
5.5 Know about Foam Suppression Systems.
5.6 Know about Manual Fire Fighting Utilization.
5.7 Know about Gaseous Systems.
5.8 Know about Clean Agent Systems, Chemical Systems, Dual Agent Systems.
COURSE CONTENT:
Unit-1: Introduction to environmental control in the petroleum industry
Introduction to environmental control in the petroleum industry: Overview of environmental
issues- sources of wastes, Environmental impact of wastes, waste migration, Managing
wastes, waste treatment methods, waste disposal methods, clean up methods for contaminated
sizes, Environmental Regulations- A new attitude Drilling Wastes- overview of the drilling
process, drilling fluids(water based drilling fluids, oil based drilling fluids, unwanted
components) drilling fluid separations, Reserve pits, site preparation, Production wastes-
overview of production process, produced water, production chemicals, well stimulation,
151
Natural gas production, other operations, Radio active materials Air emissions-combustion,
Emission from operations, Fugitive emissions.
Unit-2: The impact of drilling and production operations

The impact of drilling and production operations: Measuring toxicity-Hydrocarbons- hydro
carbon families, hydrocarbon toxicity, impact on health, impact on plant growth. Salt- impact
on plants, impact on aquatic organism.
Heavy metals- Barium, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Mercury,
Nickel Vanadium, Zinc, Production chemicals- Drilling fluids- Bioassays on drilling fluids ,
impact on drilling fluid disposal -Produced water- Nuclear radiation- radioactive decay –
health physics, naturally occurring radioactive minerals -Air pollution- Acoustic impacts-
Effects of offshore platforms- Risk assessment.
Unit-3: Petroleum Wastes-Environmental Transport surface paths

Petroleum Wastes-Environmental Transport -Surface paths – Surface paths – releases on
land, releases on water, Atmospheric paths – treatment methods –treatment of water –
Removal of suspended hydrocarbons ,Removal of dissolved hydrocarbons, Removal of
suspended solids, Removal of dissolve solids , Treatment of solids, Removal of water ,
Removal of hydrocarbons, solidification- Treatment of Air Emissions – hydrocarbons, sulfur
oxides, nitrogen oxides , particulates Waste Disposal Methods –Surface Disposal - Disposal
of water ,Disposal of solids Subsurface Disposal- Disposal of liquids, Disposal of solids.
Unit-4: Introduction, the Fire Process and Chemistry of Fire

Fire in History- Fire Losses-Fire Causes- Interested Parties in Fire Safety- Fire Protection
Standards and practice – How much Safety is Enough- Conclusion- Introduction- Fire
Triangle-Fire Tetrahedron-Fuels-Smoldering-Metal Fires-Combustion of Dusts-Ease of
Ignition-Heat-Ignition Processes-Thermal feedback-Fire Stages-Structure of Flames- Flame
Height/Length-Fire Plume-Plume Features-Flame Progression-Matter Around us-Avogadro‘s
Hypothesis-Work versus Energy-Energy in Chemical Reactions-Oxidation and Reduction-
Chemical Chain Reaction in Fire-Reduction Atmosphere-Vapor Pressure of Liquids-
Flammability Limits and Flammable Range-Estimating Lower Flammability Limit (LFL)-
Flash Point-Fire Point-Ignition Point-Ignition Energy.
Unit-5: Methods of Fire Suppression

Portal Fire Extinguishers-Water Suppression Systems-Water Supplies-Fire Pumps-Firewater
Distribution Systems-Firewater Control and Isolation Valves-Sprinkler Systems-Water
Deluge Systems-Water Spray Systems-Water Flooding-Stream Smothering-Water Curtains-
Blow-Out Water Injection Systems-Monitors, Hydrants and Hose Reels-Foam Suppression
Systems-Manual Fire Fighting Utilization-Gaseous Systems-Clean Agent Systems-Chemical
Systems-Dual Agent Systems
TEXTBOOK:
1) Environmental Control in Petroleum-Engineering. John C. Reis, Gulf Publishing
Company. 1996.
2) Principles of Fire Safety Engineering: Understanding Fire and Fire Protection
By-AKHIL KUMAR DAS.
3) Handbook of Fire and Explosion Protection Engineering Principles: for Oil, Gas,
Chemical and related facilities- by Dennis P. Nolan
152
OIL AND GAS PRODUCTION ENGGINEERING
Subject title : Oil and Gas Production Engineering

Periods / week :5
TIME SCHEDULE
Weightage
No. of
Periods
marks
Unit – I
1 25 36 2 3
Petroleum Production system
Unit – II
2 Fundamentals of Reservoir fluid 15 19 3 1
flow
Unit – III
3 Reservoir deliverability and well 15 23 1 2
Performance
Unit –IV
4 Choke performance and well 10 16 2 1
deliverability
Unit – V
5 Fore cast of well production and 10 16 2 1
production decline analysis
75 110 10 08
OBJECTIVES:
Unit-1: Petroleum Production system

1.1 Know about the Petroleum Production system.
1.2 Explain about Reservoir.
1.3 Explain about Well.
1.4 Understand about Separator used in petroleum production system.
1.5 State the auxiliary equipment required for petroleum production system.
1.6 State the types of pumps required for petroleum production system.
1.7 State the types of compressors required for petroleum production system.
1.8 Explain about the working of Pumps, Gas Compressors used in petroleum production
system.
1.9 Explain about the design of Pipelines used in petroleum production system.
1.10 Explain about the properties of Oil and Natural Gas.
Unit – II: Fundamentals of Reservoir fluid flow

2.1 Know about Fundamentals of Reservoir fluid flow.
2.2 Know about types of fluids
2.3 Know about incompressible fluids
2.4 Know about slightly compressible fluids
2.5 Know about unsteady state flow
2.6 Know about pseudo steady state flow
2.7 Know about reservoir geometry
153
2.8 Know about fluid flow equations
Unit – III: Reservoir deliverability and well Performance

3.0 Know about introduction to flow regimes
3.1 Know about inflow performance relationship
3.2 Know about productivity index
3.3 Know about LPR for single phase reservoir
3.4 Know about LPR for two phase reservoir
3.5 Know about tubing performance relationship
3.6 Know about single phase liquid flow
3.7 Know about multi phase flow in oil wells
Unit –IV: Choke performance and well deliverability

4.0 Know about introduction to sonic and sub sonic flow
4.1 Know about single phase liquid flow
4.2 Know about single phase gas flow
4.3 Know about sonic flow, temperature at choke
4.4 Know about well deliverability
4.5 Know about introduction to nodal analysis
4.6 Know about analysis with well head node
Unit – V: Fore cast of well production and production decline analysis.

5.0 Know about introduction to oil production during transient flow
5.1 Know about pseudo steady flow period
5.2 Know about gas production during transient flow
5.3 Know about production decline analysis
5.4 Know about introduction to exponential decline, relative decline rate
5.5 Know about production rate decline
5.6 Know about hyperbolic decline
COURSE CONTENT:
Unit – I
Petroleum Production system-
Introduction -Reservoir,- water-drive- gas cap drive, dissolve-gas drive reservoir- Well,
casing tubing packers down hole chokes-well head –Christmas tree-surface chokes-
Separator,-horizontal ,vertical ,spherical separators - Pump- Gas Compressor, Pipelines. –
safety control systems
Properties of Oil and Natural Gas.-introduction-properties of oil-solution gas oil ratio- density
of oil –properties of natural gas –specific gravity of gas, pseudo critical pressure and
temperature, viscosity of gas, gas compressibility factor -density of gas.
Unit – II
Fundamentals of Reservoir fluid flow-introduction –types of fluids –incompressible fluids-
slightly compressible fluids - compressible fluids – flow regimes – steady state flow –
unsteady state flow-pseudo steady state flow- reservoir geometry – radial flow ,linear flow,
spherical flow-number of flowing fluids in the reservoir –fluid flow equations, Darcy‘s law.
Unit – III
Reservoir deliverability and well Performance – introduction – flow regimes – Inflow
Performance – relationship productivity index – LPR for single phase flow- phase reservoir-
LPR for two phase reservoir- composite IPR- Future IPR
154
Well bore performance –introduction- tubing performance relationship –single phase liquid
flow –multiphase flow in oil wells
Unit –IV
Choke performance and well deliverability- introduction- sonic flow and subsonic flow-
single- phase liquid – flow – single phase gas flow –sonic flow ,temperature at choke ,
applications- well deliverability- introduction-nodal analysis- analysis with bottom hole node
– analysis with well head node
Unit- V
Fore cast of well production and production decline analysis-introduction-oil production
during transient flow and pseudo – steady flow period –gas production – during transient
flow and pseudo – steady state flow period- production decline analysis-introduction-
exponential decline, relative decline rate prediction rate decline ,cumulative production,
effective decline rate – harmonic decline – hyperbolic decline –relative problems
Text books:
1. Petroleum Production Engineering: A computer Assisted Approach, Boyun Guo, William
C.Lyons, Ali Ghalambor, Elsevier Science & Technology Books, 2007.
2. Petroleum Production Systems, M.J.Economides, A.Daniel Hill & C.E.Economides,
Prentice-Hall, N.J-07488, 1994.
3. Production Technology I-II, Institute of Petroleum Engineering, Herriot Watt University.
4. The technology of Artificial Lift Method, Brown, K.E., Volume 1, penn well Books,
1977.
155
PETROLEUM EQUIPMENT DESIGN & SIMULATION LAB
Subject title : PETROLEUM EQUIPMENT DESIGN & SIMULATION LAB

Periods / week : 06
The following experiments have to be conducted using C/C++/ Simulink using

MATLAB/Hysys:
1. Oil- Water separator.

2. Gas- Oil-Water separator.
3. Lean / rich amine heat exchanger.
4. Air cooled heat exchanger.
5. CO2 and H2S absorber unit using, MEA/DEA amine solution.
6. Stripping unit.
7. Single stage flash vaporization unit.
8. Three stage flash vaporization unit.
9. Liquid pumping system.
10. Gas Compressor unit.
156
INSTRUMENTATION AND PROCESS CONTROL LAB
Subject Title : INSTRUMENTATION AND PROCESS CONTROL LAB

Periods / week : 03
1. Determine the response of a bare thermometer and plot the response curve.
2. Determine the response of a thermometer with thermal well and plot the response
curve.
3. Calibrate a give thermocouple and plot a graph between the experimentally obtained
thermal EMF and temperature data against the theoretical thermal EMF and
temperature data.
4. Obtain the resistance and temperature data for a given resistance thermometer.
5. Determine the response of a single tank liquid level system for a given step input and
determine the time constant. Plot the response by using a complete response method
and incomplete response method.
6. Determine the response of a second tank of a two tank interacting liquid level system
for a given step input and determine the time constants. Plot the response by using an
incomplete response method.
7. Determine the response of a second tank of a two tank non-interacting liquid level
system for a given step input and determine the time constants. Plot the response by
using an incomplete response method.
8. Determine the response of an air oven incorporated with ON-OFF control system and
determine the offset for the system.
9. Determine the valve coefficient CV for a linear type control valve and plot the control
valve characteristics.
10. Determine the valve coefficient CV for an Equal percentage type control valve and
plot the control valve characteristics.
11. Determine the damping coefficient for critical, over and under damped condition of a
second order U-tube manometer.
157
LIFE SKILLS
Subject title : LIFE SKILLS

Periods / week : 03
TIME SCHEDULE
No. of periods Allotted

Sl No. UNITS Explan
Activities Total
ation
1. ATTITUDE 1 3 4
2. ADAPTABILITY 1 3 4
3. GOAL SETTING 1 3 4
4. MOTIVATION 1 3 4
5. TIME MANAGEMENT 1 3 4
6. CRITICAL THINKING 2 3 5
7. CREATIVITY 1 3 4
8. PROBLEM SOLVING 1 3 4
9. TEAM WORK 1 3 4
10. LEADERSHIP 1 3 4
11. STRESS MANAGEMENT 1 3 4
TOTAL 12 33 45
Note: No Written Examination; The total 45 hours are to be considered as Theory

hours.
Marks: Internal – 40; External – 60
OBJECTIVES:
Upon the completion of this course, the student shall be able to
1.0 Understand the concept of Attitude

158
1.1 Define ‗Attitude‘
1.2 Explain the importance of Attitude
1.3 Distinguish between Positive and Negative Attitudes
1.4 Life Response: Need for change of Attitude
1.5 Positive Attitude: Key to success in Personal and Professional Lives
2.0 Understand the concept of Adaptability
2.1 Define the term ‗Adaptability‘
2.2 Explain the concept of Adaptability
2.3 Advantages of Adaptability
2.4 Disadvantages of Lack of Adaptability
2.5 Need for positive response to change
3.0 Understand the concept of Goal setting
3.1 Define the terms‗Goal‘ and ‗Goal Setting‘
3.2 Explain the significance of Goal setting&Long and Short term goals
3.3 Explain the following concepts
a) Wish b) Dream c) Goal
3.4 Explain the reasons for and consequences of not setting goals
3.5 The SMART features in Goal setting
4.0 Understand the concept of Motivation
4.1 Define ‗Motivation‘ ; Inspiration Vs Motivation
4.2 Importance of motivation in Goal setting
4.3 Distinguish between Internal (Self) Motivation and External Motivation
4.4 De-motivating Factors and how to overcome them
4.5Motivating oneself and others
5.0 Understand Time Management skills
5.1 Define ‗Time Management‘.
5.2 Comprehend the significance of Time Management.
5.3 Explain the Time Quadrant
5.4 Common Time wasters and how to overcome them.
159
5.5 How to meet deadlines and targets within time
6.0 Understand Critical Thinking
6.1 Define―Critical Thinking‖,
6.2 Understand the importance of Critical Thinking
6.3 Distinguish between facts and opinions (assumptions)
6.4 Inculcating different perspectives
6.5 Developing Reasoning abilities and form sound judgments
7.0 Understand Creativity
7.1 Understand the importance of and need for creative ideas
7.2 Distinguish between Linear Thinking and Lateral Thinking
7.3 Distinctive qualities of creative people
7.4 Unusual or creative use of familiar objects
7.5 Creative ways of solving problems
8.0 Understand Problem Solving
8.1. Define the concept of Problem solving
8.2 Viewing the problems as challenges
8.3 Different steps in solving a problem
8.4 Selecting the best solution to solve a problem
8.5 Lateral thinking in Problem solving
9.0 Understand Team Work
9.1 Define Team work
9.2 Develop Team skills
9.3 Advantages of team work
9.4 Understand responsibilities as a team player
9.5 Problems of working in a team and possible solutions
10.0 Understand Leadership
10.1 Define Leadership
10.2 Identify Leadership qualities
10.3 Analyze one‘s strengths and limitations as a leader
160
10.4 Types of Leadership: Autocratic and Democratic
10.5 Leadership by example
11.0 Understand Stress Management
11.1 Define Stress
11.2 Explain the causes of stress
11.3 Learn Stress Management skills
11.4 Need for positive thinking and self esteem
11.5 Practice Stress Management strategies
161
RESERVOIR SIMULATION LAB
Subject Title : RESERVOIR SIMULATION LAB

Periods / Week : 06
1. Observe the effect of permeability on the production
2. Stimulation of reservoir and its effect on the production
3. History matching and future production forecasting
4. Estimate the recovery factor for the given field
162
163
VI SEMESTER
164
(VI Semester)
C-16 Curriculum
S.NO Subject/Subject code Duration Items Max Marks

1.First Assessment
100
(Viva Voce)
2.Second Assessment
100
(Viva Voce)
Practical Training in the 6 3.At the institution after completion of training
1
Industry/PET-601 Months
d) Log Book 30
e) Training Report 30
f) Seminar 40
Total Per Semester = 300 Marks
 The Industrial Training shall carry 300 marks and Pass marks are 50%.
 A candidate failing to secure the minimum marks should complete it at his own
expenses.
 During Industrial Training the candidate shall put in a minimum of 90% attendance.
165
DIPLOMA IN PETROLEUM TECHNOLOGY
C – 16-VI SEMESTER
PET-601-INDUSTRIAL TRAINING
Duration: 06 months
OBJECTIVES:
On completion of a spell of practical training in a chemical, Petroleum or allied industry, the
student will be able to
1.0 Know the organizational set up from top executive to workmen level
1.1 Know the function of each department/section.
1.2 Know the inter relationship among various department/sections.
2.0 Know the various raw materials used as feed stock and chemical composition
and their source.
2.1 Understand the various intermediates produced and their further processing and/or
waste disposal.
2.2 Know the final products, its composition and its commercial importances, uses and
applications.
3.0 Understand the various stages involved in processing, sequential arrangement of

different equipment.
3.1 Draw the block flow diagram, detail flow diagram of each process after line tracing.
3.2 Understand the arrangement of various process equipment in systematic manner in a
less possible area of site.
4.0 Know importance process variables required to be maintained in each process

equipment of each unit like temperature, pressure, flow rate etc.
Understand the unit operations principles.
Apply unit operations theory learned at the institution.
Know the various unit processes (Chemical reactions in each process plan)
Identify the side reactions in each process plant.
5.0 Know the various analytical methods used in the quality control department.
5.1 Understand the experimental methods to find out the compositions and physical
properties of various raw materials, intermediates and final products.
5.2 Operate various analytical instruments that are used in laboratory.
6.0 Know the trouble shooting in process operation.

6.1 Know preventive precautions of the same for each equipment in each process.
6.2 Start up and shut down procedures for the equipment and plant.
7.0 Know various measuring instrument, recording instruments and control

instruments.
7.1 Understand the D.C.S in each process.
7.2 Identify various sensing elements, transmission elements, indication devices.
8.0 Know the importance of safety in chemical industries and Petroleum Industries.
166
8.1 Understand the safety about personnel protection, equipment protection.
8.2 Know the usage of various safety devices.
8.3 Precautionary measures to be taken.
9.0 Know the various effluents from each process plant.
9.1 Understand effects of hazardous effluents.
9.2 Understand treatment method and disposal.
9.3 Know the effective operation to minimize the effluents.
COURSE CONTENT:
1. Organizational set up.
2. Raw materials, intermediates and end products.
3. Process descriptions (Process flow diagrams and line tracing, detailed flow diagrams etc.).
4. Process parameters (such as temperature, pressure, flow level etc.), Unit operations and
unit process in each process.
5. Quality control of raw materials, intermediates and end products.
6. Operational troubles and preventive measures.
7. Process instrumentation.
8. Safety aspects (personnel, equipment etc.).
9. Effluent treatment.
VI SEMESTER INDUSTRIAL TRAINING SCHEME:
Guide lines for Industrial Training evaluation:
1. A candidate shall be assessed twice in each spell (semester) periodically.
2. Assessment shall be carried out joint
a) A representative of the industry and
b) A faculty member of the Institution.
3. The assessment at the end of the third month and the end of training shall each carry 100
marks for the progress made during the corresponding period of training.
The remaining 100 marks are allotted as follows:
For the training report (Record) 30 marks,
For maintenance of log book 30 marks
For seminar 40 marks.
4. These are to be evaluated at the institution at the end of training by a committee

consisting following staff members
(1) Head of Section.
(2) External Examiner preferably from Industry
(3) Staff member who assessed the student during the Industrial Training.
5. The progress made during the end of assessment will be evaluated on the basis of the
following parameters.
167
ASSESSMENT SCHEME
Max. Marks Allotted

S. No. Name of the Parameter
for each Parameter
1. Attendance and punctuality 05
2. Familiarity with Technical terms 06
3. Familiarity with tools and material 10
4. Attitude towards job 07
5. Manual skills 04
6. Application of knowledge 10
7. Problem solving skills 10
8. Comprehension and observation 04
9. Safety and Environmental consciousness 03
10. Human relations 04
11. Ability to communicate 06
12. Supervising ability 10
13. General conduct during the period 06
14. Maintenance of dairy 15
Total 100
168

DPET

Uploaded by

Copyright:

Available Formats

DPET

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DPET

Uploaded by

Copyright:

Available Formats

Front Cover Page

State Board of Technical Education and Training

3 Years DIPLOMA IN PETROLEUM TECHNOLOGY

2. Scheme of Instruction and Examination of I year

3. Scheme of Instruction and Examination of III semester

4. Scheme of Instruction and Examination of IV semester

5. Scheme of Instruction and Examination of V semester

6. Scheme of Instruction and Examination of VI semester

18. PET-301 Engineering Mathematics – II

27. PET-401 Reservoir Engineering

36. PET-501 Industrial Management and Smart Technologies

45. PET-601 Industrial Training

FOR DIPLOMA COURSES IN ANDHRA PRADESH

The revised New Curriculum i.e., Curriculum–2016 (C-16) is approved by BoG of

RULES AND REGULATIONS

1 DURATION AND PATTERN OF THE COURSES

2 PROCEDURE FOR ADMISSION INTO THE DIPLOMA COURSES:

The medium of instruction and examination shall be English.

4 PERMANENT IDENTIFICATION NUMBER (PIN)

A cumulative / academic record is to be maintained of the Marks secured in

5 NUMBER OF WORKING DAYS PER SEMESTER / YEAR:

c). A stipulated fee shall be payable towards condonation for shortage of

d). Candidates having less than 65% attendance shall be detained.

1. a) Within 15 days after commencement of class work in any semester (Except

b) For Industrial Training: before commencement of the Industrial training.

2. Within 30 days after commencement of class works in any year (including

The percentage of attendance of the readmitted candidates shall be calculated

THEORY EXAMINATION: Each Subject carries 80% marks with examination of

b) III, IV, V, VI and VII Semesters:

THEORY EXAMINATION: Each subject carries usually 80 marks and 30 marks

PRACTICAL EXAMINATION: Each subject carry 60/30 marks of 3hours

9 INTERNAL ASSESSMENT SCHEME

b) Practical Subjects: Student‘s performance in Laboratories / Workshop shall be

d) For practical examinations, except in drawing, there shall be two examiners.

f) Records pertaining to internal assessment marks of both theory and practical

Maintenance of log book : 30 marks

Record Work : 30 marks

Seminar / viva-voce : 40 marks

TOTAL : 300 marks

The assessment at the institution level (Seminar/Viva-voce)shall be done by three

10 MINIMUM PASS MARKS

11. PROVISION FOR IMPROVEMENT

2. Improvement is allowed in any 4 (Four) subjects of the Diploma.

4. No improvement is allowed in Practical / Lab subjects or Project work or

a) For Diploma Courses of 3 Years duration

A candidate is eligible to appear for the 4th semester examination if he/she

i) Puts the required percentage of attendance in the 4th semester

For IVC & ITI Lateral Entry Students:

A candidate is eligible to appear for the 5th semester examination if he/she

i) Puts the required percentage of attendance in the 5th semester

ii) Should get eligibility to appear for 4th Semester examination.

For IVC& ITI Lateral Entry students:

i) Puts the required percentage of attendance in the 5th semester

A candidate is eligible to appear for 6th semester Industrial Training assessment

ii) Should get eligibility to appear for 4th Semester Examination.

For IVC & ITI Lateral Entry students:

Seminar/Viva-voce should not be conducted for Not-Eligible Candidates, till the

i) Puts the required percentage of attendance in the 4th semester

For IVC & ITI Lateral Entry students:

(i) Puts the required percentage of attendance in the 4th semester