Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Oy Oy Oy

    Uploaded by

    Carlos S. Vásquez
    This document contains the analysis of stresses in a beam carrying two loads. The beam is made of steel with a yield strength of 370 MPa and a factor of safety of 3.0. The beam has a diameter of 1.7478mm as calculated from the maximum bending moment of 58.593 N-m and maximum shear stress. The equivalent stress was calculated to be 123.333 MPa which is less than the allowable stress divided by the factor of safety. Therefore the beam design is satisfactory.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Oy Oy Oy

    Uploaded by

    Carlos S. Vásquez
    24 views4 pages
    This document contains the analysis of stresses in a beam carrying two loads. The beam is made of steel with a yield strength of 370 MPa and a factor of safety of 3.0. The beam has a diameter of 1.7478mm as calculated from the maximum bending moment of 58.593 N-m and maximum shear stress. The equivalent stress was calculated to be 123.333 MPa which is less than the allowable stress divided by the factor of safety. Therefore the beam design is satisfactory.

    Original Title

    P1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains the analysis of stresses in a beam carrying two loads. The beam is made of steel with a yield strength of 370 MPa and a factor of safety of 3.0. The beam has a diameter of 1.7478mm as calculated from the maximum bending moment of 58.593 N-m and maximum shear stress. The equivalent stress was calculated to be 123.333 MPa which is less than the allowable stress divided by the factor of safety. Therefore the beam design is satisfactory.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views4 pages

    Oy Oy Oy

    Uploaded by

    Carlos S. Vásquez
    This document contains the analysis of stresses in a beam carrying two loads. The beam is made of steel with a yield strength of 370 MPa and a factor of safety of 3.0. The beam has a diameter of 1.7478mm as calculated from the maximum bending moment of 58.593 N-m and maximum shear stress. The equivalent stress was calculated to be 123.333 MPa which is less than the allowable stress divided by the factor of safety. Therefore the beam design is satisfactory.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Primer examen parcial

    Parte 1 Alumno: Carlos Sergei Vásquez Maya"

    MATERIAL: Acero UNS G10108


    Factor de Seguridad DE 3.0
    S ut := 440MPa
    S y := 370MPa

    Nf := 3

    F1 := 50N l1 := 150mm D1 := 300mm

    F2 := 270N l2 := 400mm D2 := 250mm

    X := 0.15
    l3 := 300mm
    ( )
    Tb := F2 − F1 ⋅ l1 = 33 ⋅ N ⋅ m

    2 ⋅ Tb
    T1 := = 310.588 ⋅ N
    D2 ⋅ ( 1 − X )

    T2 := X ⋅ T1 = 46.588 N

    ΣFy := 0

    Oy + T1 ⋅ sin ( 45deg) + T2 ⋅ sin ( 45deg) + Cy = ⋅ 0

    Oy + Cy = ⋅ −T1 ⋅ sin ( 45deg) − T2 ⋅ sin ( 45deg) a := −T1 ⋅ sin ( 45deg) − T2 ⋅ sin ( 45deg) = −252.562 N

    Oy + Cy = ⋅ −252.562N

    ΣFx := 0

    −Oz − T2 ⋅ cos ( 45deg) − T1 ⋅ cos ( 45deg ) + 320N + Cz = ⋅ 0


    b := −T2 ⋅ cos ( 45deg) − T1 ⋅ cos ( 45deg ) + 320N = 67.438 N

    −Oz − Cz = ⋅ T2 ⋅ cos ( 45deg ) + T1 ⋅ cos ( 45deg ) − 320N

    Oz + Cz = ⋅ 67.438N
    ΣM Oxy := 0
    ΣM Oxz := 0
    ( )
    l3 ⋅ ( 252.562N) + Cy ⋅ l1 + l2 + l3 = ⋅ 0

    ( ) ( )
    l3 ⋅ ( 252.562N) − 320N ⋅ l2 + l3 + Cz ⋅ l1 + l2 + l3 = ⋅ 0
    −l3 ⋅ ( 252.562N)
    Cy := = −89.14 N
    l1 + l2 + l3
    Cz :=
    ( ) = 174.39 N
    −l3 ⋅ ( 252.562N) + 320N ⋅ l2 + l3

    l1 + l2 + l3
    Oy := −252.562N − Cy = −163.422 N
    Oz := 67.438N − Cz = −106.952 N
    Al notar que A es el punto mas cargado, decimos que ahi esta el maximo momento

    Mplanoxy := −49026.74N ⋅ mm

    Mplanoxz := −32085.56N ⋅ mm

    2 2
    Mmax := Mplanoxy + Mplanoxz = 58.593 ⋅ N ⋅ m

    Energía de distorsión

    4 4
    π ⋅r π ⋅r
    I := J :=
    4 2

    Mmax ⋅ r T ⋅r
    σx := σy := 0 τx :=
    I J
    4Mmax 2T
    σx := τx :=
    3 3
    π ⋅r π ⋅r

    2 2 2
    σ' := σx + σy − σx σy + 3τxy

    Sy
    Sy
    σ' := = 123.333 ⋅ MPa
    Nf Nf :=
    σ'

    2 2
     4Mmax   2Tb 
    σ' := + 3
     π ⋅ r3   π ⋅ r3 
       

    r := 0.8739mm

    Finalmente, podemos decir que Diametro DE es de 1.7478mm

    You might also like