SM4001AL THRU SM4007AL

1.0 AMP SURFACE MOUNT SILICON RECTIFIERS

VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
FEATURES
* Ideal for surface mount applications
* Easy pick and place DO-214AC(SMA)
* Built-in strain relief
* High surge current capability
.066(1.70) .110(2.79)
.040(1.00) .100(2.54)

MECHANICAL DATA .177(4.50)

.157(3.99)
* Case: Molded plastic
.012(0.31)
* Epoxy: UL 94V-0 rate flame retardant .006(0.15)
* Terminals: Solder plated, solderable per MIL-STD-202F,
.095(2.40)
method 208 guranteed .078(2.00)
* Polarity: Color band denotes cathode end
* Mounting position: Any .060(1.52) .005
MAX.
.030(0.76) (.127)
* Weight: 0.063 gram .205(5.20)
.189(4.80)

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

TYPE NUMBER SM4001AL SM4002AL SM4003AL SM4004AL SM4005AL SM4006AL SM4007AL UNITS
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
.375"(9.5mm) Lead Length at Ta=75 C 1.0 A
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method) 30 A
Maximum Instantaneous Forward Voltage at 1.0A 1.1 V
Maximum DC Reverse Current Ta=25 C 5.0
at Rated DC Blocking Voltage Ta=100 C 50
Typical Junction Capacitance (Note 1) 15 pF
Typical Thermal Resistance RqJA (Note 2) 50 C/W
Operating and Storage Temperature Range TJ, TSTG -65 +175 C

NOTES:

1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.

2. Thermal Resistance from Junction to Ambient.

REVISE FOR WIRE WIDTH FROM 1.20mm-1.70mm TO,1.00mm- 1.70mm EFFECTED : 2013/10/28 REV:C
 RATING AND CHARACTERISTIC CURVES (SM4001AL THRU SM4007AL)

FIG.1-TYPICAL FORWARD
FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE
CHARACTERISTICS

AVERAGE FORWARD CURRENT,(A)

1.2
50
1.0
INSTANTANEOUS FORWARD CURRENT,(A)

0.8
10
Single Phase
0.6
Half Wave 60Hz
Resistive Or Inductive Load
3.0 0.4

0.2
1.0
0
0 20 40 60 80 100 120 140 160 180 200
Tj=25 C
Pulse Width 300us AMBIENT TEMPERATURE ( C)
1% Duty Cycle

0.1
FIG.4-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT

50
PEAK FORWAARD SURGE CURRENT,(A)

.01
.6 .7 .8 .9 1.0 1.1 1.2 1.3
40
FORWARD VOLTAGE,(V)

30

Tj=25 C 8.3ms Single Half

20 Sine Wave

JEDEC method

10
FIG.3 - TYPICAL REVERSE
CHARACTERISTICS 0
100 1 5 10 50 100
NUMBER OF CYCLES AT 60Hz

FIG.5-TYPICAL JUNCTION CAPACITANCE

10
35
Tj=100 C

30
JUNCTION CAPACITANCE,(pF)

25
1.0
20

15
Tj=25 C
.1
10

0
.01 .01 .05 .1 .5 1 5 10 50 100
0 20 40 60 80 100 120 140
PERCENTAGE RATED PEAK REVERSE VOLTAGE REVERSE VOLTAGE,(V)