Idealarc DC-1000: Industrial DC Multi-Process Welder
Idealarc DC-1000: Industrial DC Multi-Process Welder
Idealarc DC-1000
®
rectifier.
C
L
ISO
9001:2000
14001:2004
2 3 4 5 6
1. Ammeter/Voltmeter
2. Weld Terminals On or Remotely Controlled
3. Output Control
4. Welding Mode Switch
5. Local/Remote Switch 1
6. On/Off Pushbutton
7. Power Source Pilot Light
7
RECOMMENDED ACCESSORIES
GENERAL OPTIONS Factory Undercarriage Flex Feed 74 HT
For moving by hand on smooth Four drive-roll, high-torque,
Paralleling Kit
surface floors. Heavy-duty, industrial semiautomatic wire feeder
Permits paralleling of two
puncture-resistant (inner tube and for general/structural fabrication
power sources.
Order K1897-1
sealant) tires and front caster. See Publication E8.203
Convenient steering handle.
Order K1770-1
Remote Output Control Flex Feed 84 Single Bench
For remote output of welding current Four drive roll feeder with heavy
All-Terrain Undercarriage duty wire reel stand for general/
or voltage. Consists of control box
For moving by hand at construction structural fabrication
with 25 or 100 ft. (7.6 or 30 m) of
four conductor cable and 6 pin
sites. Maneuvers over obstacles. See Publication E8.205
Heavy-duty puncture-resistant (inner
MS-type connector. Requires K843
tube and sealant) tires.
adapter.
Order K1737-1 NA-3 and NA-5 Automatic Wire
Order K857 for 25 ft. (7.6 m)
Feeders
Order K857-1 for 100 ft. (30 m)
These automatic drive heads and
Weld Fume Control Solutions controls are designed for hard
Lincoln Electric offers a wide variety automation applications with
Control Cable Adapter Kit-6 Pin
of weld fume control solutions, FCAW-S, GMAW or SAW processes.
Adapts 6-pin MS-type plug
connection to terminal strip on
ranging from portable systems Request Publication E9.10
easily wheeled around the shop to
power source.
shop-wide central systems servicing
Order K843
many dedicated welding stations.
Request Publication MC08-70
Control Cable Adapter Kit-14 Pin
Adapts 14-pin MS-type plug
WIRE FEEDER OPTIONS
connection to terminal strip on
power source. LT-7 Tractors
Order K1798 Self-propelled mechanized wire
feeder, designed for the submerged
arc process with track system
capabilities.
Order K227-1 Standard Model
Order K395-1 Track Model
PRODUCT SPECIFICATIONS
Net
Product Product Input Power Rated Output Input Current Output HxWxD Weight
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle @ Rated Output Range inches (mm) lbs. (kg)
Idealarc® K1386-3 230/460/3/60 1000A/44V/100% 193/96.5A 16-46V 30.7 x 22.25 x 39.0 821
DC-1000 K1386-4 575/3/60 77.2A 150-1300A (781 x 565 x 991) (372)
K1387-3 220/380/440/3/50/60 193/112/96.5A
K1387-6 415/3/50/60 102A
K1387-11 380/440/3/50/60 112/96.5A
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln
Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.