3RP25741NW30 Datasheet en
3RP25741NW30 Datasheet en
3RP25741NW30 Datasheet en
Switching Function
switching function
● ON-delay No
● ON-delay/instantaneous contact No
● passing make contact No
● passing make contact/instantaneous contact No
Short-circuit protection
● design of the fuse link for short-circuit fuse gL/gG: 4 A
protection of the auxiliary switch required
Auxiliary circuit
Material of switching contacts AgSnO2
● number of NC contacts delayed switching 0
● number of NO contacts delayed switching 1
● number of CO contacts delayed switching 0
operating current of auxiliary contacts at AC-15
● at 24 V 3 A
● at 250 V 3 A
operating current of auxiliary contacts at DC-13
● at 24 V 1 A
● at 125 V 0.2 A
● at 250 V 0.1 A
operating frequency with 3RT2 contactor maximum 5 000 1/h
contact reliability of auxiliary contacts one incorrect switching operation of 100 million switching
operations (17 V, 5 mA)
contact rating of auxiliary contacts according to UL R300 / B300
influence of the surrounding temperature 1% in the whole temperature range to the set runtime
Power supply influence 1% in the whole voltage range to the set runtime
Switching capacity current with inductive load 0.01 ... 3 A
Inputs/ Outputs
● product function at the relay outputs switchover No
delayed/without delay
● Product function non-volatile No
Electromagnetic compatibility
EMI immunity
● acc. to IEC 61812-1 EN 61000-6-2
● conducted interference due to burst acc. to IEC 2 kV network connection / 1 kV control connection
61000-4-4
● Conducted interference due to conductor-earth 2 kV
surge acc. to IEC 61000-4-5
● Conducted interference due to conductor- 1 kV
conductor surge acc. to IEC 61000-4-5
field-bound parasitic coupling acc. to IEC 61000-4-3 10 V/m
electrostatic discharge acc. to IEC 61000-4-2 4 kV contact discharge / 8 kV air discharge
Connections/ Terminals
● product function removable terminal for Yes
auxiliary and control circuit
● type of electrical connection for auxiliary and screw-type terminals
control current circuit
● type of connectable conductor cross-sections 1x (0.5 ... 4.0 mm²), 2x (0.5 ... 2.5 mm²)
solid
● Type of connectable conductor cross-sections 1x (0.5 ... 4 mm²), 2x (0.5 ... 1.5 mm²)
finely stranded with core end processing
● Type of connectable conductor cross-sections 1x (20 ... 12), 2x (20 ... 14)
at AWG conductors solid
● type of connectable conductor cross-sections at 1x (20 ... 12), 2x (20 ... 14)
AWG conductors stranded
● connectable conductor cross-section solid 0.5 ... 4 mm²
● connectable conductor cross-section finely 0.5 ... 4 mm²
stranded with core end processing
AWG number as coded connectable conductor cross
section
● solid 20 ... 12
● stranded 20 ... 14
tightening torque 0.6 ... 0.8 N·m
design of the thread of the connection screw M3
Ambient conditions
● installation altitude at height above sea level 2 000 m
maximum
● ambient temperature during operation -25 ... +60 °C
● ambient temperature during storage -40 ... +85 °C
● ambient temperature during transport -40 ... +85 °C
relative humidity
● during operation 10 ... 95 %
Certificates/ approvals
General Product Approval EMC Declaration of
Conformity
Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RP2574-1NW30
91.6
22.5 86.5
S IRIU S
3 RP2 5 7 4 - 1 NW3 0
A2 A2
1 2 ...2 4 0 V 1 2 ...2 4 0 V
AC/ DC AC/ DC
A1 A1
50
3 RP2 5 7 4 - 1 NW3 0
100
1 8 NO 2 8 NO
17C
3 RP2 5 7 4 - 1 NW3 0
A1
-K
18 NO
28 NO
A2
A2