JY997D20701H Side

B
Side
A JAPANESE
Side
B ENGLISH How to obtain manuals 1.1 Incorporated Items 2.2 Mounting
For product manuals or documents, consult with the Mitsubishi Electric dealer from The product is mounted by the following method.
who you purchased your product. Product FX3U-4AD special function block for analog input
 Direct mounting
Certification of UL, cUL standards  Special unit/block No. label
Accessories  Dust proof sheet  1  DIN rail mounting
The following product has UL and cUL certification.  Installation manual (This manual)
FX3U-4AD UL, cUL File Number:E95239
2.2.1 Direct Mounting
The product can be mounted with M4 screws by using the direct mounting holes.
Models: MELSEC FX3U series manufactured 1.2 External Dimensions, Part Names, and Terminal Layout
Refer to the External Dimensions (section 1.2) for the product’s mounting hole
INSTALLATION MANUAL FX3U-4AD 1.2.1 External Dimensions and Part Names pitch information.
Compliance with EC directive (CE Marking) [Without top cover] An interval space between each unit of 1 to 2 mm (0.04" to 0.08") is necessary.
This note does not guarantee that an entire mechanical module produced in [1] [2] [3] [4] For further information of direct installation, also refer to the following manual.
Manual Number JY997D20701 accordance with the contents of this note will comply with the following standards. Refer to the FX3G Series User's Manual - Hardware Edition
Compliance to EMC directive and LVD directive for the entire mechanical module Refer to the FX3GC Series User's Manual - Hardware Edition

(mounting hole pitch)

Revision H should be checked by the user / manufacturer. For more details please contact the Refer to the FX3U Series User's Manual - Hardware Edition
local Mitsubishi Electric sales site. Refer to the FX3UC Series User's Manual - Hardware Edition
Date July 2019

90(3.55")
80(3.15")
Refer to the MELSEC iQ-F FX5U User's Manual (Hardware)
Requirement for Compliance with EMC directive [9]
Refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)
The following products have shown compliance through direct testing (of the identified
standards below) and design analysis (through the creation of a technical construction FX3U-4AD 2.2.2 DIN Rail Mounting
This manual describes the part names, dimensions, mounting, and specifications

FX3U-4AD
of the product. Before use, read this manual and the manuals of all relevant file) to the European Directive for Electromagnetic Compatibility (2014/30/EU) when The product can be mounted on a DIN rail (DIN46227, 35mm width).
used as directed by the appropriate documentation. [8] 1) Fit the upper edge of the DIN rail mounting
products fully to acquire proficiency in handling and operating the product. Make 1)
sure to learn all the product information, safety information, and precautions. Attention groove (fig. A) onto the DIN rail.
9(0.36") 4(0.16")
Store this manual in a safe place so that it can be taken out and read whenever This product is designed for use in industrial applications. [7] [6] [5] 2) Press the product against the DIN rail.
87(3.43") 55(2.17")
necessary. Always forward it to the end user. Type: Programmable Controller (Open Type Equipment)
Registration: Phillips is a registered trademark of Phillips Screw Company. Models: MELSEC FX3U series manufactured Unit: mm (inches)
The company names, system names and product names mentioned in this manual from February 1st, 2006 FX3U-4AD MASS(Weight) : Approx. 0.2kg(0.44lbs) A
are either registered trademarks or trademarks of their respective companies. In Standard Remark [1] Direct mounting hole:2 holes of 4.5 (0.18") (mounting screw: M4 screw)
some cases, trademark symbols such as '' or '' are not specified in this manual. [2] Extension cable
EN61131-2:2007 Compliance with all relevant aspects of the
Effective July 2019 Programmable controllers standard. [3] POWER LED (green):
Specifications are subject to change without notice. - Equipment requirements and EMI Lit while 5V DC power is supplied from PLC. 2)
 2006 MITSUBISHI ELECTRIC CORPORATION tests • Radiated Emission [4] Terminal block for power supply (24V DC) (M3 terminal screw)
• Conducted Emission 3) Connect the extension cable (fig. B) to the
[5] Terminal block for analog input
main unit, input/output extension unit/
Safety Precautions (Read these precautions before use.) EMS
• Radiated electromagnetic field
[6] 24V LED (red): block, and special function unit/block on
This manual classifies the safety precautions into two categories: Lit while 24V DC power is supplied properly to terminals [24+] and [24-]. the left.
• Fast transient burst
• Electrostatic discharge [7] A/D LED (red): Flashes (at high speed) during A/D conversion. For the details of the extension cable
and .
• High-energy surge [8] DIN rail mounting hook connection, refer to the following manual.
• Voltage drops and interruptions [9] DIN rail mounting groove (35 mm (1.38") wide) Refer to the FX3G Series User's
Indicates that incorrect handling may cause hazardous • Conducted RF Manual - Hardware Edition
conditions, resulting in death or severe injury. • Power frequency magnetic field 1.2.2 Terminal Layout Refer to the FX3GC Series User's
Manual - Hardware Edition
Indicates that incorrect handling may cause hazardous Caution for EC Directive 24- V+ I+ V+ I+ V+ I+ V+ I+ Refer to the FX3U Series User's
conditions, resulting in medium or slight personal injury The FX3U-4AD have been found to be compliant to the European standards in 24+ VI- FG VI- FG VI- FG VI- Manual - Hardware Edition
or physical damage. the aforesaid manual and directive. However, for the very best performance Refer to the FX3UC Series User's
from what are in fact delicate measuring and controlled output device Mitsubishi CH1 CH2 CH3 CH4 Manual - Hardware Edition
Depending on the circumstances, procedures indicated by may also Electric would like to make the following points; Left side of the product Refer to the MELSEC iQ-F FX5U User's
cause severe injury. As analog devices are sensitive by nature, their use should be considered care- (Extension cable side) Manual (Hardware)
It is important to follow all precautions for personal safety. fully. For users of proprietary cables (integral with sensors or actuators), these Refer to the MELSEC iQ-F FX5UC User's
users should follow those manufacturers installation requirements. 2. Installation Manual (Hardware)
Associated Manuals Mitsubishi Electric recommend that shielded cables should be used. If NO other
EMC protection is provided, then users may experience temporary loss or INSTALLATION 3. Wiring
Manual name Manual No. Description accuracy between ±10% in very heavy industrial areas. PRECAUTIONS
However, Mitsubishi Electric suggest that if adequate EMC precautions are fol- WIRING
FX 3S /FX 3G /FX 3GC /  Use the product within the generic environment specifications described in PLC PRECAUTIONS
FX3U/FX3UC Series JY997D16701 Describes specifications for analog lowed for the users complete control system, users should expect accuracy as main unit manual (Hardware Edition).
control and programming method specified in this manual. Never use the product in areas with excessive dust, oily smoke, conductive dusts,  Make sure to cut off all phases of the power supply externally before
User's Manual MODEL CODE:
for FX3S/FX3G/FX3GC/FX3U/  Sensitive analog cable should not be laid in the same trunking or cable
- Analog Control 09R619 corrosive gas (salt air, Cl 2 , H 2 S, SO 2 , or NO 2 ), flammable gas, vibration or attempting installation or wiring work.
FX3UC Series PLC. conduit as high voltage cabling. Where possible users should run analog
Edition impacts, or expose it to high temperature, condensation, or rain and wind. Failure to do so may cause electric shock or damage to the product.
cables separately. If the product is used in such conditions, electric shock, fire, malfunctions,
FX 3S /FX 3G /FX 3GC /  Good cable shielding should be used. Ground the shield of the twisted deterioration or damage may occur.
FX3U/FX3UC Series JY997D16601 WIRING
Describes PLC programming for shielded cable at one point on the PLC side.  Do not touch the conductive parts of the product directly.
Programming Manual MODEL CODE: basic/applied instructions and PRECAUTIONS
 When reading analog values, EMC accuracy can be improved out by Doing so may cause device failures or malfunctions.
- Basic & Applied 09R517 devices. averaging the readings. This can be achieved either through functions on the  Install the product securely using a DIN rail or mounting screws.  Make sure to observe the following precautions in order to prevent
Instruction Edition special function block for analog input or through a users program in the  Install the product on a flat surface. malfunctions under the influence of noise:
FX3U Series PLC main unit. If the mounting surface is rough, undue force will be applied to the PC board,
FX3G Series JY997D31301 Explains the FX3G Series PLC thereby causing nonconformities. 1) Do not bundle the power line or twisted shielded cable together with or lay
 Please use FX3U-4AD while installed in a shielded enclosure. For the details, it close to the main circuit, high-voltage line or load line.
User’s Manual MODEL CODE: specifications for I/O, wiring,  When drilling screw holes or wiring, make sure that cutting and wiring debris do
refer to the following manual. Otherwise, noise disturbance and/or surge induction are likely to take
- Hardware Edition 09R521 installation, and maintenance. not enter the ventilation slits of the PLC.
Refer to the FX3G Series User's Manual - Hardware Edition place. As a guideline, lay the control line 100mm (3.94") or more away
Refer to the FX3GC Series User's Manual - Hardware Edition Failure to do so may cause fire, equipment failures or malfunctions.
FX3GC Series JY997D45401 Explains the FX3GC Series PLC from the main circuit, high-voltage line, or load line.
Refer to the FX3U Series User's Manual - Hardware Edition  Be sure to remove the dust proof sheet from the PLC's ventilation slits when
User's Manual MODEL CODE: specifications for I/O, wiring, installation work is completed.
Refer to the FX3UC Series User's Manual - Hardware Edition 2) Ground the shield wire or shield of the shielded cable at one point on the
- Hardware Edition 09R533 installation, and maintenance. Failure to do so may cause fire, equipment failures or malfunctions.
Refer to the MELSEC iQ-F FX5U User's Manual (Hardware) PLC. However, do not use common grounding with heavy electrical
FX3U Series JY997D16501 Explains the FX3U Series PLC Refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)  Connect extension cables securely to their designated connectors. systems.
User’s Manual MODEL CODE: specifications for I/O, wiring, Loose connections may cause malfunctions.
Note for compliance with EN61131-2:2007  Make sure to properly wire to the terminal blocks in accordance with the
- Hardware Edition 09R516 installation, and maintenance. following precautions.
 General note on the use of the power supply cable. 2.1 Arrangements
FX3UC Series JY997D28701 Explains the FX3UC Series PLC Failure to do so may cause electric shock, equipment failures, a short-circuit,
The FX3U-4AD unit requires that the cable used for power supply is 30m or less. The product connects on the right side of an PLC main unit or extension units/blocks
User’s Manual MODEL CODE: specifications for I/O, wiring, wire breakage, malfunctions, or damage to the product.
 When an external power supply is used, attach a ferrite core to the power cable and (including special function units/blocks).
- Hardware Edition 09R519 installation, and maintenance. For connection to FX3GC/FX3UC Series PLC or FX2NC Series PLC extension block, - The disposal size of the cable end should follow the dimensions
make 2 turns around.
FX2NC-CNV-IF or FX3UC-1PS-5V is required. described in the manual.
MELSEC iQ-F FX5U JY997D55301 Explains the FX5U PLC (Ferrite core used in Mitsubishi Electric's test E04SR401938 manufactured by
For connection to FX5U/FX5UC PLC, FX5-CNV-BUS or FX5-CNV-BUSC is required. - Tightening torque should follow the specification in the manual.
User’s Manual MODEL CODE: specifications for I/O, wiring, SEIWA ELECTRIC MFG. CO., LTD.)
For further information of installation arrangements, refer to the following manual. - Tighten the screws using a Phillips-head screwdriver No.2 (shaft diameter
(Hardware) 09R536 installation, and maintenance. 1. Outline For details, refer to the FX3G Series User's Manual - Hardware Edition. 6mm (0.24") or less). Make sure that the screwdriver does not touch the
MELSEC iQ-F FX5UC JY997D61401 Explains the FX5UC PLC The FX3U-4AD special function block for analog input converts four analog input values For details, refer to the FX3GC Series User's Manual - Hardware Edition. partition part of the terminal block.
(voltage, current) to digital values and transfers those digital values to the PLC main unit. For details, refer to the FX3U Series User's Manual - Hardware Edition.
User’s Manual MODEL CODE: specifications for I/O, wiring,
For details, refer to the FX3UC Series User's Manual - Hardware Edition.
(Hardware) 09R558 installation, and maintenance. For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware)
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)

3.1 Applicable Cable and Terminal Tightening Torque For details, refer to the FX3G Series User's Manual - Hardware Edition. 4.3 Power Supply Specifications 4.5 Input characteristics
The size of the terminal screws is M3. For details, refer to the FX3GC Series User's Manual - Hardware Edition. The input characteristics in each input mode are as follows.
The end disposal of the cable shows below. For details, refer to the FX3U Series User's Manual - Hardware Edition. Item Specification For the details of the input characteristics, refer to the following manual.
Tighten the terminal to a torque of 0.5 to 0.8Nm. For details, refer to the FX3UC Series User's Manual - Hardware Edition. Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual
For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware) A/D conversion 24V DC 10%, 90mA
Do not tighten terminal screws with a torque outside the abovementioned range. circuit driving power (24V DC power is supplied from the power connector.) - Analog Control Edition
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)
Failure to do so may cause equipment failures or malfunctions.
5V DC, 110mA Input Analog input Digital output
 When one wire is connected to one terminal Another Another Another Input mode
PLC equipment PLC equipment PLC equipment CPU driving power (5V DC power is supplied from the internal power supply of mode range range
Terminal Crimp main unit.) 0 Voltage input mode -10 to +10V -32000 to +32000
3.2 (0.13") screw terminal
6.2 mm (0.24") Independent grounding Shared grounding Common grounding 4.4 Performance Specifications 1 Voltage input mode -10 to +10V -4000 to +4000
or less Best condition Good condition Not allowed
Description Voltage input mode
3.2 (0.13") 2 2 -10 to +10V -10000 to +10000
 The grounding wire size should be AWG 14 (2 mm ). Item Analog value direct indication
6.2 mm (0.24") Terminal  The grounding point should be close to the PLC, and all grounding wire Voltage input Current input
3 Current input mode 4 to 20mA 0 to 16000
or less should be as short as possible. Analog input -10 to +10V DC -20 to +20mA, 4 to 20mA DC
range (Input resistance: 200 k) (Input resistance: 250) 4 Current input mode 4 to 20mA 0 to 4000
 When two wires are connected to one terminal 4. Specifications
Offset*1 -10 to +9V*2 -20 to +17mA*3 Current input mode
3.2 (0.13") 5 4 to 20mA 4000 to 20000
STARTUP AND Analog value direct indication
6.2 mm (0.24") Terminal Crimp Gain*1 -9 to +10V*2 -17 to +30mA*3
screw terminal MAINTENANCE 6 Current input mode -20 to +20mA -16000 to +16000
or less PRECAUTIONS Maximum
6.3 mm (0.25") 15V 30mA 7 Current input mode -20 to +20mA -4000 to +4000
absolute input
or more  Do not disassemble or modify the PLC.
Doing so may cause fire, equipment failures, or malfunctions. Digital output With sign, 16bits, binary With sign, 15bits, binary Current input mode
3.2 (0.13") 8 -20 to +20mA -20000 to +20000
* For repair, contact your local Mitsubishi Electric representative. Analog value direct indication
6.2 mm (0.24") Resolution 0.32mV (20V/64000) 1.25A (40mA/32000)
Terminal  Do not drop the product or exert strong impact to it.
or less Doing so may cause damage.  0.5% (200A) for full scale
6.3 mm (0.25") of 40mA (when ambient
or more temperature is 25C5C and Nj⬉఼⬉ᄤѻક᳝ᆇ⠽䋼䰤ࠊՓ⫼ᷛ䆚㽕∖njⱘ㸼⼎ᮍᓣ
DISPOSAL a current of -20 mA to +20 mA
3.2 Power Supply Wiring PRECAUTIONS  0.3% (60mV) for full scale is input)
For the power supply wiring, refer to the following manual. of 20V (when ambient Same when input is 4mA to
 Please contact a certified electronic waste disposal company for the temperature is 25C5C) 20mA 1RWH7KLVV\PEROPDUNLVIRU&KLQDRQO\
Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual
environmentally safe recycling and disposal of your device. Total accuracy
- Analog Control Edition  0.5% (100mV) for full scale  1.0% (400A) for full scale
3.3 Wiring of Analog Input of 20V (when ambient of 40mA (when ambient ৿᳝᳝ᆇ⠽䋼ⱘৡ⿄ˈ৿᳝䞣ˈ৿᳝䚼ક
For the terminal layout, refer to Subsection 1.2.2 TRANSPORTATION AND temperature is 0C to 55C) temperature is 25C5C and
STORAGE PRECAUTIONS a current of -20 mA to +20 mA ǂᴀѻકЁ᠔৿᳝ⱘ᳝ᆇ ⠽䋼ⱘৡ⿄ˈ৿᳝䞣ˈ৿᳝䚼કབϟ㸼
External power is input) ᠔⼎DŽ
FX3U-4AD
supply wiring  The product is a precision instrument. During transportation, avoid impacts larger Same when input is 4mA to
+15V than those specified in the general specifications by using dedicated packaging 20mA ѻકЁ᳝ᆇ⠽䋼ⱘৡ⿄ঞ৿䞣
24+
24V DC *1 boxes and shock-absorbing palettes.
24- -15V Failure to do so may cause failures in the product. 500s number of selected channels
A/D conversion ᳝ᆇ⠽䋼
Grounding (If channels use the digital filter(s): 5ms number of selected
After transportation, verify operation of the product and check for damage of the time
(Ground resistance: channels)
100Ω or less) mounting part, etc. 䚼ӊৡ⿄ ໮⒈
*2 䪙 ∲ 䬝 ݁Ӌ䫀 ໮⒈㘨㣃
Input mode 0 Input mode 3 Ѡ㣃䝮
Using current input 3E +J &G &U9, 3%%
4.1 Applicable PLC Digital value Digital value 3%'(
Shield *3 ch 6.8kΩ +32640
ch Model name Applicability
V+ +32000 16400 ৃ㓪⿟ ໪໇ ƻ ƻ ƻ ƻ ƻ ƻ
*4 250Ω Ver. 1.00 or later (from first production)
I+ FX3G Series PLC 16000
᥻ࠊ఼ ॄࠋ෎ᵓ h ƻ ƻ ƻ ƻ ƻ
+10.2

Up to 8 blocks can be extended

VI- -10 0
200kΩ Ver. 1.40 or later (from first production) ᴀ㸼Ḑձ᥂6-7ⱘ㾘ᅮ㓪ࠊDŽ
FX3GC Series PLC*1
20.4

FG Up to 8 blocks can be extended +10

*2
-10.2

Using voltage input Input

ch Ver. 2.20 or later (from first production) voltage(V) ƻ㸼⼎䆹᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼*%7
Shield *3 6.8kΩ ch FX3U Series PLC 0 4 20
Up to 8 blocks can be extended -32000 㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
V+ Input
*5 250Ω Input -32640 current(mA) h㸼⼎䆹᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ*%7
I+ Ver. 1.30 or later (from the production manufactured in August, characteristics
FX3UC Series PLC*1 2004 with SER No. 48) *4 Input mode 6  㾘ᅮⱘ䰤䞣㽕∖DŽ
VI- Up to 8 blocks can be extended*2 Digital value
200kΩ ෎ѢЁ೑ᷛ‫ⱘ⊩ޚ‬খ㗗㾘Ḑ*%7
FG +16320
*2 Ver. 1.000 or later (from first production)
FX5U PLC*3 +16000
Up to 8 blocks can be extended
+20.4

ch : represents the channel number.

Ver. 1.000 or later (from first production)
FX5UC PLC*3 -20 This manual confers no industrial property rights or any rights of any other kind,
*1 For FX3G/FX3U/FX5U PLC (AC power type), the 24V DC service power Up to 6 blocks can be extended 0
supply is also available. nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
The version number can be checked by monitoring D8001 as the last three digits +20
held responsible for any problems involving industrial property rights which may
-20.4

Input
*2 The [FG] terminal and the [ ] terminal are connected internally. indicate it. current(mA) occur as a result of using the contents noted in this manual.
There is no “FG” terminal for ch1. When using ch1, connect directly to the *1 An FX2NC-CNV-IF or FX3UC-1PS-5V is necessary to connect the FX3U-4AD with -16000 Warranty
[ ] terminal. the FX3GC/FX3UC PLC. -16320
Exclusion of loss in opportunity and secondary loss from warranty liability
*3 Use a 2-core twisted shield wire for analog input line, and separate it from *2 Up to 7 units can be connected to the FX3UC-32MT-LT(-2) PLC.
 The photo-coupler insulates the analog input area from the PLC. Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:
other power lines or inductive lines. *3 An FX5-CNV-BUS or FX5-CNV-BUSC is necessary to connect the FX3U-4AD (1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
Insulation  The DC-DC converter insulates the analog input area from the
*4 For the current input, short-circuit the [V+] terminal and the [I+] terminal. with the FX5U/FX5UC PLC. method power supply unit. (2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
*5 If there is voltage ripple in the input voltage or there is noise in the external  Channels are not insulated from each other. (3) Special damages and secondary damages whether foreseeable or not, compensation for
4.2 General Specifications accidents, and compensation for damages to products other than Mitsubishi products.
wiring, connect a capacitor of approximately 0.1 to 0.47F 25 V.
For the general specifications other than the following, refer to the manual of the PLC Occupied (4) Replacement by the user, maintenance of on-site equipment, start-up test run
8 point (Count either the input or output points of the PLC.)
3.4 Grounding main unit. points and other tasks.
Grounding should be performed as stated below. The items other than the following are equivalent to those of the PLC main unit.
*1 Change the offset and gain values to change the input characteristics. However,
 The grounding resistance should be 100 or less. For details, refer to the FX3G Series User's Manual - Hardware Edition.
 Independent grounding should be performed for best results.
For details, refer to the FX3GC Series User's Manual - Hardware Edition. the resolution doesn’t change even when the offset and gain values change. For safe use
For details, refer to the FX3U Series User's Manual - Hardware Edition. When the analog value direct indication is enabled in the input mode 2, 5, or 8,
When independent grounding is not performed, perform "shared the offset value and the gain value don’t change.
For details, refer to the FX3UC Series User's Manual - Hardware Edition.  This product has been manufactured as a general-purpose part for general
grounding" of the following figure. For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware) *2 The offset and the gain should satisfy the following condition: industries, and has not been designed or manufactured to be incorporated in
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware) 1V  (Gain - Offset)  7.5V a device or system used in purposes related to human life.
Item Specification *3 The offset and the gain should satisfy the following condition:  Before using the product for special purposes such as nuclear power, electric
3mA  (Gain - Offset)  30mA power, aerospace, medicine or passenger movement vehicles, consult with
Dielectric withstand Mitsubishi Electric.
500V AC for one minute Between all terminals and *4 The input characteristics vary depending on the input mode to be used.
voltage  This product has been manufactured under strict quality control. However
ground terminal of PLC For the details of the input characteristics, refer to the following manual.
5 M  o r h i g h e r b y 5 0 0 V D C main unit when installing the product where major accidents or losses could occur if the
Insulation resistance Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual product fails, install appropriate backup or failsafe functions in the system.
insulation resistance tester
- Analog Control Edition

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
 JY997D20701H Side
B
Side
A JAPANESE
Side
B ENGLISH How to obtain manuals 1.1 Incorporated Items 2.2 Mounting
For product manuals or documents, consult with the Mitsubishi Electric dealer from The product is mounted by the following method.
who you purchased your product. Product FX3U-4AD special function block for analog input
 Direct mounting
Certification of UL, cUL standards  Special unit/block No. label
Accessories  Dust proof sheet  1  DIN rail mounting
The following product has UL and cUL certification.  Installation manual (This manual)
FX3U-4AD UL, cUL File Number:E95239
2.2.1 Direct Mounting
The product can be mounted with M4 screws by using the direct mounting holes.
Models: MELSEC FX3U series manufactured 1.2 External Dimensions, Part Names, and Terminal Layout
Refer to the External Dimensions (section 1.2) for the product’s mounting hole
INSTALLATION MANUAL FX3U-4AD 1.2.1 External Dimensions and Part Names pitch information.
Compliance with EC directive (CE Marking) [Without top cover] An interval space between each unit of 1 to 2 mm (0.04" to 0.08") is necessary.
This note does not guarantee that an entire mechanical module produced in [1] [2] [3] [4] For further information of direct installation, also refer to the following manual.
Manual Number JY997D20701 accordance with the contents of this note will comply with the following standards. Refer to the FX3G Series User's Manual - Hardware Edition
Compliance to EMC directive and LVD directive for the entire mechanical module Refer to the FX3GC Series User's Manual - Hardware Edition

(mounting hole pitch)

Revision H should be checked by the user / manufacturer. For more details please contact the Refer to the FX3U Series User's Manual - Hardware Edition
local Mitsubishi Electric sales site. Refer to the FX3UC Series User's Manual - Hardware Edition
Date July 2019

90(3.55")
80(3.15")
Refer to the MELSEC iQ-F FX5U User's Manual (Hardware)
Requirement for Compliance with EMC directive [9]
Refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)
The following products have shown compliance through direct testing (of the identified
standards below) and design analysis (through the creation of a technical construction FX3U-4AD 2.2.2 DIN Rail Mounting
This manual describes the part names, dimensions, mounting, and specifications

FX3U-4AD
of the product. Before use, read this manual and the manuals of all relevant file) to the European Directive for Electromagnetic Compatibility (2014/30/EU) when The product can be mounted on a DIN rail (DIN46227, 35mm width).
used as directed by the appropriate documentation. [8] 1) Fit the upper edge of the DIN rail mounting
products fully to acquire proficiency in handling and operating the product. Make 1)
sure to learn all the product information, safety information, and precautions. Attention groove (fig. A) onto the DIN rail.
9(0.36") 4(0.16")
Store this manual in a safe place so that it can be taken out and read whenever This product is designed for use in industrial applications. [7] [6] [5] 2) Press the product against the DIN rail.
87(3.43") 55(2.17")
necessary. Always forward it to the end user. Type: Programmable Controller (Open Type Equipment)
Registration: Phillips is a registered trademark of Phillips Screw Company. Models: MELSEC FX3U series manufactured Unit: mm (inches)
The company names, system names and product names mentioned in this manual from February 1st, 2006 FX3U-4AD MASS(Weight) : Approx. 0.2kg(0.44lbs) A
are either registered trademarks or trademarks of their respective companies. In Standard Remark [1] Direct mounting hole:2 holes of 4.5 (0.18") (mounting screw: M4 screw)
some cases, trademark symbols such as '' or '' are not specified in this manual. [2] Extension cable
EN61131-2:2007 Compliance with all relevant aspects of the
Effective July 2019 Programmable controllers standard. [3] POWER LED (green):
Specifications are subject to change without notice. - Equipment requirements and EMI Lit while 5V DC power is supplied from PLC. 2)
 2006 MITSUBISHI ELECTRIC CORPORATION tests • Radiated Emission [4] Terminal block for power supply (24V DC) (M3 terminal screw)
• Conducted Emission 3) Connect the extension cable (fig. B) to the
[5] Terminal block for analog input
main unit, input/output extension unit/
Safety Precautions (Read these precautions before use.) EMS
• Radiated electromagnetic field
[6] 24V LED (red): block, and special function unit/block on
This manual classifies the safety precautions into two categories: Lit while 24V DC power is supplied properly to terminals [24+] and [24-]. the left.
• Fast transient burst
• Electrostatic discharge [7] A/D LED (red): Flashes (at high speed) during A/D conversion. For the details of the extension cable
and .
• High-energy surge [8] DIN rail mounting hook connection, refer to the following manual.
• Voltage drops and interruptions [9] DIN rail mounting groove (35 mm (1.38") wide) Refer to the FX3G Series User's
Indicates that incorrect handling may cause hazardous • Conducted RF Manual - Hardware Edition
conditions, resulting in death or severe injury. • Power frequency magnetic field 1.2.2 Terminal Layout Refer to the FX3GC Series User's
Manual - Hardware Edition
Indicates that incorrect handling may cause hazardous Caution for EC Directive 24- V+ I+ V+ I+ V+ I+ V+ I+ Refer to the FX3U Series User's
conditions, resulting in medium or slight personal injury The FX3U-4AD have been found to be compliant to the European standards in 24+ VI- FG VI- FG VI- FG VI- Manual - Hardware Edition
or physical damage. the aforesaid manual and directive. However, for the very best performance Refer to the FX3UC Series User's
from what are in fact delicate measuring and controlled output device Mitsubishi CH1 CH2 CH3 CH4 Manual - Hardware Edition
Depending on the circumstances, procedures indicated by may also Electric would like to make the following points; Left side of the product Refer to the MELSEC iQ-F FX5U User's
cause severe injury. As analog devices are sensitive by nature, their use should be considered care- (Extension cable side) Manual (Hardware)
It is important to follow all precautions for personal safety. fully. For users of proprietary cables (integral with sensors or actuators), these Refer to the MELSEC iQ-F FX5UC User's
users should follow those manufacturers installation requirements. 2. Installation Manual (Hardware)
Associated Manuals Mitsubishi Electric recommend that shielded cables should be used. If NO other
EMC protection is provided, then users may experience temporary loss or INSTALLATION 3. Wiring
Manual name Manual No. Description accuracy between ±10% in very heavy industrial areas. PRECAUTIONS
However, Mitsubishi Electric suggest that if adequate EMC precautions are fol- WIRING
FX 3S /FX 3G /FX 3GC /  Use the product within the generic environment specifications described in PLC PRECAUTIONS
FX3U/FX3UC Series JY997D16701 Describes specifications for analog lowed for the users complete control system, users should expect accuracy as main unit manual (Hardware Edition).
control and programming method specified in this manual. Never use the product in areas with excessive dust, oily smoke, conductive dusts,  Make sure to cut off all phases of the power supply externally before
User's Manual MODEL CODE:
for FX3S/FX3G/FX3GC/FX3U/  Sensitive analog cable should not be laid in the same trunking or cable
- Analog Control 09R619 corrosive gas (salt air, Cl 2 , H 2 S, SO 2 , or NO 2 ), flammable gas, vibration or attempting installation or wiring work.
FX3UC Series PLC. conduit as high voltage cabling. Where possible users should run analog
Edition impacts, or expose it to high temperature, condensation, or rain and wind. Failure to do so may cause electric shock or damage to the product.
cables separately. If the product is used in such conditions, electric shock, fire, malfunctions,
FX 3S /FX 3G /FX 3GC /  Good cable shielding should be used. Ground the shield of the twisted deterioration or damage may occur.
FX3U/FX3UC Series JY997D16601 WIRING
Describes PLC programming for shielded cable at one point on the PLC side.  Do not touch the conductive parts of the product directly.
Programming Manual MODEL CODE: basic/applied instructions and PRECAUTIONS
 When reading analog values, EMC accuracy can be improved out by Doing so may cause device failures or malfunctions.
- Basic & Applied 09R517 devices. averaging the readings. This can be achieved either through functions on the  Install the product securely using a DIN rail or mounting screws.  Make sure to observe the following precautions in order to prevent
Instruction Edition special function block for analog input or through a users program in the  Install the product on a flat surface. malfunctions under the influence of noise:
FX3U Series PLC main unit. If the mounting surface is rough, undue force will be applied to the PC board,
FX3G Series JY997D31301 Explains the FX3G Series PLC thereby causing nonconformities. 1) Do not bundle the power line or twisted shielded cable together with or lay
 Please use FX3U-4AD while installed in a shielded enclosure. For the details, it close to the main circuit, high-voltage line or load line.
User’s Manual MODEL CODE: specifications for I/O, wiring,  When drilling screw holes or wiring, make sure that cutting and wiring debris do
refer to the following manual. Otherwise, noise disturbance and/or surge induction are likely to take
- Hardware Edition 09R521 installation, and maintenance. not enter the ventilation slits of the PLC.
Refer to the FX3G Series User's Manual - Hardware Edition place. As a guideline, lay the control line 100mm (3.94") or more away
Refer to the FX3GC Series User's Manual - Hardware Edition Failure to do so may cause fire, equipment failures or malfunctions.
FX3GC Series JY997D45401 Explains the FX3GC Series PLC from the main circuit, high-voltage line, or load line.
Refer to the FX3U Series User's Manual - Hardware Edition  Be sure to remove the dust proof sheet from the PLC's ventilation slits when
User's Manual MODEL CODE: specifications for I/O, wiring, installation work is completed.
Refer to the FX3UC Series User's Manual - Hardware Edition 2) Ground the shield wire or shield of the shielded cable at one point on the
- Hardware Edition 09R533 installation, and maintenance. Failure to do so may cause fire, equipment failures or malfunctions.
Refer to the MELSEC iQ-F FX5U User's Manual (Hardware) PLC. However, do not use common grounding with heavy electrical
FX3U Series JY997D16501 Explains the FX3U Series PLC Refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)  Connect extension cables securely to their designated connectors. systems.
User’s Manual MODEL CODE: specifications for I/O, wiring, Loose connections may cause malfunctions.
Note for compliance with EN61131-2:2007  Make sure to properly wire to the terminal blocks in accordance with the
- Hardware Edition 09R516 installation, and maintenance. following precautions.
 General note on the use of the power supply cable. 2.1 Arrangements
FX3UC Series JY997D28701 Explains the FX3UC Series PLC Failure to do so may cause electric shock, equipment failures, a short-circuit,
The FX3U-4AD unit requires that the cable used for power supply is 30m or less. The product connects on the right side of an PLC main unit or extension units/blocks
User’s Manual MODEL CODE: specifications for I/O, wiring, wire breakage, malfunctions, or damage to the product.
 When an external power supply is used, attach a ferrite core to the power cable and (including special function units/blocks).
- Hardware Edition 09R519 installation, and maintenance. For connection to FX3GC/FX3UC Series PLC or FX2NC Series PLC extension block, - The disposal size of the cable end should follow the dimensions
make 2 turns around.
FX2NC-CNV-IF or FX3UC-1PS-5V is required. described in the manual.
MELSEC iQ-F FX5U JY997D55301 Explains the FX5U PLC (Ferrite core used in Mitsubishi Electric's test E04SR401938 manufactured by
For connection to FX5U/FX5UC PLC, FX5-CNV-BUS or FX5-CNV-BUSC is required. - Tightening torque should follow the specification in the manual.
User’s Manual MODEL CODE: specifications for I/O, wiring, SEIWA ELECTRIC MFG. CO., LTD.)
For further information of installation arrangements, refer to the following manual. - Tighten the screws using a Phillips-head screwdriver No.2 (shaft diameter
(Hardware) 09R536 installation, and maintenance. 1. Outline For details, refer to the FX3G Series User's Manual - Hardware Edition. 6mm (0.24") or less). Make sure that the screwdriver does not touch the
MELSEC iQ-F FX5UC JY997D61401 Explains the FX5UC PLC The FX3U-4AD special function block for analog input converts four analog input values For details, refer to the FX3GC Series User's Manual - Hardware Edition. partition part of the terminal block.
(voltage, current) to digital values and transfers those digital values to the PLC main unit. For details, refer to the FX3U Series User's Manual - Hardware Edition.
User’s Manual MODEL CODE: specifications for I/O, wiring,
For details, refer to the FX3UC Series User's Manual - Hardware Edition.
(Hardware) 09R558 installation, and maintenance. For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware)
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)

3.1 Applicable Cable and Terminal Tightening Torque For details, refer to the FX3G Series User's Manual - Hardware Edition. 4.3 Power Supply Specifications 4.5 Input characteristics
The size of the terminal screws is M3. For details, refer to the FX3GC Series User's Manual - Hardware Edition. The input characteristics in each input mode are as follows.
The end disposal of the cable shows below. For details, refer to the FX3U Series User's Manual - Hardware Edition. Item Specification For the details of the input characteristics, refer to the following manual.
Tighten the terminal to a torque of 0.5 to 0.8Nm. For details, refer to the FX3UC Series User's Manual - Hardware Edition. Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual
For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware) A/D conversion 24V DC 10%, 90mA
Do not tighten terminal screws with a torque outside the abovementioned range. circuit driving power (24V DC power is supplied from the power connector.) - Analog Control Edition
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)
Failure to do so may cause equipment failures or malfunctions.
5V DC, 110mA Input Analog input Digital output
 When one wire is connected to one terminal Another Another Another Input mode
PLC equipment PLC equipment PLC equipment CPU driving power (5V DC power is supplied from the internal power supply of mode range range
Terminal Crimp main unit.) 0 Voltage input mode -10 to +10V -32000 to +32000
3.2 (0.13") screw terminal
6.2 mm (0.24") Independent grounding Shared grounding Common grounding 4.4 Performance Specifications 1 Voltage input mode -10 to +10V -4000 to +4000
or less Best condition Good condition Not allowed
Description Voltage input mode
3.2 (0.13") 2 2 -10 to +10V -10000 to +10000
 The grounding wire size should be AWG 14 (2 mm ). Item Analog value direct indication
6.2 mm (0.24") Terminal  The grounding point should be close to the PLC, and all grounding wire Voltage input Current input
3 Current input mode 4 to 20mA 0 to 16000
or less should be as short as possible. Analog input -10 to +10V DC -20 to +20mA, 4 to 20mA DC
range (Input resistance: 200 k) (Input resistance: 250) 4 Current input mode 4 to 20mA 0 to 4000
 When two wires are connected to one terminal 4. Specifications
Offset*1 -10 to +9V*2 -20 to +17mA*3 Current input mode
3.2 (0.13") 5 4 to 20mA 4000 to 20000
STARTUP AND Analog value direct indication
6.2 mm (0.24") Terminal Crimp Gain*1 -9 to +10V*2 -17 to +30mA*3
screw terminal MAINTENANCE 6 Current input mode -20 to +20mA -16000 to +16000
or less PRECAUTIONS Maximum
6.3 mm (0.25") 15V 30mA 7 Current input mode -20 to +20mA -4000 to +4000
absolute input
or more  Do not disassemble or modify the PLC.
Doing so may cause fire, equipment failures, or malfunctions. Digital output With sign, 16bits, binary With sign, 15bits, binary Current input mode
3.2 (0.13") 8 -20 to +20mA -20000 to +20000
* For repair, contact your local Mitsubishi Electric representative. Analog value direct indication
6.2 mm (0.24") Resolution 0.32mV (20V/64000) 1.25A (40mA/32000)
Terminal  Do not drop the product or exert strong impact to it.
or less Doing so may cause damage.  0.5% (200A) for full scale
6.3 mm (0.25") of 40mA (when ambient
or more temperature is 25C5C and Nj⬉఼⬉ᄤѻક᳝ᆇ⠽䋼䰤ࠊՓ⫼ᷛ䆚㽕∖njⱘ㸼⼎ᮍᓣ
DISPOSAL a current of -20 mA to +20 mA
3.2 Power Supply Wiring PRECAUTIONS  0.3% (60mV) for full scale is input)
For the power supply wiring, refer to the following manual. of 20V (when ambient Same when input is 4mA to
 Please contact a certified electronic waste disposal company for the temperature is 25C5C) 20mA 1RWH7KLVV\PEROPDUNLVIRU&KLQDRQO\
Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual
environmentally safe recycling and disposal of your device. Total accuracy
- Analog Control Edition  0.5% (100mV) for full scale  1.0% (400A) for full scale
3.3 Wiring of Analog Input of 20V (when ambient of 40mA (when ambient ৿᳝᳝ᆇ⠽䋼ⱘৡ⿄ˈ৿᳝䞣ˈ৿᳝䚼ક
For the terminal layout, refer to Subsection 1.2.2 TRANSPORTATION AND temperature is 0C to 55C) temperature is 25C5C and
STORAGE PRECAUTIONS a current of -20 mA to +20 mA ǂᴀѻકЁ᠔৿᳝ⱘ᳝ᆇ ⠽䋼ⱘৡ⿄ˈ৿᳝䞣ˈ৿᳝䚼કབϟ㸼
External power is input) ᠔⼎DŽ
FX3U-4AD
supply wiring  The product is a precision instrument. During transportation, avoid impacts larger Same when input is 4mA to
+15V than those specified in the general specifications by using dedicated packaging 20mA ѻકЁ᳝ᆇ⠽䋼ⱘৡ⿄ঞ৿䞣
24+
24V DC *1 boxes and shock-absorbing palettes.
24- -15V Failure to do so may cause failures in the product. 500s number of selected channels
A/D conversion ᳝ᆇ⠽䋼
Grounding (If channels use the digital filter(s): 5ms number of selected
After transportation, verify operation of the product and check for damage of the time
(Ground resistance: channels)
100Ω or less) mounting part, etc. 䚼ӊৡ⿄ ໮⒈
*2 䪙 ∲ 䬝 ݁Ӌ䫀 ໮⒈㘨㣃
Input mode 0 Input mode 3 Ѡ㣃䝮
Using current input 3E +J &G &U9, 3%%
4.1 Applicable PLC Digital value Digital value 3%'(
Shield *3 ch 6.8kΩ +32640
ch Model name Applicability
V+ +32000 16400 ৃ㓪⿟ ໪໇ ƻ ƻ ƻ ƻ ƻ ƻ
*4 250Ω Ver. 1.00 or later (from first production)
I+ FX3G Series PLC 16000
᥻ࠊ఼ ॄࠋ෎ᵓ h ƻ ƻ ƻ ƻ ƻ
+10.2

Up to 8 blocks can be extended

VI- -10 0
200kΩ Ver. 1.40 or later (from first production) ᴀ㸼Ḑձ᥂6-7ⱘ㾘ᅮ㓪ࠊDŽ
FX3GC Series PLC*1
20.4

FG Up to 8 blocks can be extended +10

*2
-10.2

Using voltage input Input

ch Ver. 2.20 or later (from first production) voltage(V) ƻ㸼⼎䆹᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼*%7
Shield *3 6.8kΩ ch FX3U Series PLC 0 4 20
Up to 8 blocks can be extended -32000 㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
V+ Input
*5 250Ω Input -32640 current(mA) h㸼⼎䆹᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ*%7
I+ Ver. 1.30 or later (from the production manufactured in August, characteristics
FX3UC Series PLC*1 2004 with SER No. 48) *4 Input mode 6  㾘ᅮⱘ䰤䞣㽕∖DŽ
VI- Up to 8 blocks can be extended*2 Digital value
200kΩ ෎ѢЁ೑ᷛ‫ⱘ⊩ޚ‬খ㗗㾘Ḑ*%7
FG +16320
*2 Ver. 1.000 or later (from first production)
FX5U PLC*3 +16000
Up to 8 blocks can be extended
+20.4

ch : represents the channel number.

Ver. 1.000 or later (from first production)
FX5UC PLC*3 -20 This manual confers no industrial property rights or any rights of any other kind,
*1 For FX3G/FX3U/FX5U PLC (AC power type), the 24V DC service power Up to 6 blocks can be extended 0
supply is also available. nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
The version number can be checked by monitoring D8001 as the last three digits +20
held responsible for any problems involving industrial property rights which may
-20.4

Input
*2 The [FG] terminal and the [ ] terminal are connected internally. indicate it. current(mA) occur as a result of using the contents noted in this manual.
There is no “FG” terminal for ch1. When using ch1, connect directly to the *1 An FX2NC-CNV-IF or FX3UC-1PS-5V is necessary to connect the FX3U-4AD with -16000 Warranty
[ ] terminal. the FX3GC/FX3UC PLC. -16320
Exclusion of loss in opportunity and secondary loss from warranty liability
*3 Use a 2-core twisted shield wire for analog input line, and separate it from *2 Up to 7 units can be connected to the FX3UC-32MT-LT(-2) PLC.
 The photo-coupler insulates the analog input area from the PLC. Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:
other power lines or inductive lines. *3 An FX5-CNV-BUS or FX5-CNV-BUSC is necessary to connect the FX3U-4AD (1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
Insulation  The DC-DC converter insulates the analog input area from the
*4 For the current input, short-circuit the [V+] terminal and the [I+] terminal. with the FX5U/FX5UC PLC. method power supply unit. (2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
*5 If there is voltage ripple in the input voltage or there is noise in the external  Channels are not insulated from each other. (3) Special damages and secondary damages whether foreseeable or not, compensation for
4.2 General Specifications accidents, and compensation for damages to products other than Mitsubishi products.
wiring, connect a capacitor of approximately 0.1 to 0.47F 25 V.
For the general specifications other than the following, refer to the manual of the PLC Occupied (4) Replacement by the user, maintenance of on-site equipment, start-up test run
8 point (Count either the input or output points of the PLC.)
3.4 Grounding main unit. points and other tasks.
Grounding should be performed as stated below. The items other than the following are equivalent to those of the PLC main unit.
*1 Change the offset and gain values to change the input characteristics. However,
 The grounding resistance should be 100 or less. For details, refer to the FX3G Series User's Manual - Hardware Edition.
 Independent grounding should be performed for best results.
For details, refer to the FX3GC Series User's Manual - Hardware Edition. the resolution doesn’t change even when the offset and gain values change. For safe use
For details, refer to the FX3U Series User's Manual - Hardware Edition. When the analog value direct indication is enabled in the input mode 2, 5, or 8,
When independent grounding is not performed, perform "shared the offset value and the gain value don’t change.
For details, refer to the FX3UC Series User's Manual - Hardware Edition.  This product has been manufactured as a general-purpose part for general
grounding" of the following figure. For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware) *2 The offset and the gain should satisfy the following condition: industries, and has not been designed or manufactured to be incorporated in
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware) 1V  (Gain - Offset)  7.5V a device or system used in purposes related to human life.
Item Specification *3 The offset and the gain should satisfy the following condition:  Before using the product for special purposes such as nuclear power, electric
3mA  (Gain - Offset)  30mA power, aerospace, medicine or passenger movement vehicles, consult with
Dielectric withstand Mitsubishi Electric.
500V AC for one minute Between all terminals and *4 The input characteristics vary depending on the input mode to be used.
voltage  This product has been manufactured under strict quality control. However
ground terminal of PLC For the details of the input characteristics, refer to the following manual.
5 M  o r h i g h e r b y 5 0 0 V D C main unit when installing the product where major accidents or losses could occur if the
Insulation resistance Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual product fails, install appropriate backup or failsafe functions in the system.
insulation resistance tester
- Analog Control Edition

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
 JY997D20701H Side
B
Side
A JAPANESE
Side
B ENGLISH How to obtain manuals 1.1 Incorporated Items 2.2 Mounting
For product manuals or documents, consult with the Mitsubishi Electric dealer from The product is mounted by the following method.
who you purchased your product. Product FX3U-4AD special function block for analog input
 Direct mounting
Certification of UL, cUL standards  Special unit/block No. label
Accessories  Dust proof sheet  1  DIN rail mounting
The following product has UL and cUL certification.  Installation manual (This manual)
FX3U-4AD UL, cUL File Number:E95239
2.2.1 Direct Mounting
The product can be mounted with M4 screws by using the direct mounting holes.
Models: MELSEC FX3U series manufactured 1.2 External Dimensions, Part Names, and Terminal Layout
Refer to the External Dimensions (section 1.2) for the product’s mounting hole
INSTALLATION MANUAL FX3U-4AD 1.2.1 External Dimensions and Part Names pitch information.
Compliance with EC directive (CE Marking) [Without top cover] An interval space between each unit of 1 to 2 mm (0.04" to 0.08") is necessary.
This note does not guarantee that an entire mechanical module produced in [1] [2] [3] [4] For further information of direct installation, also refer to the following manual.
Manual Number JY997D20701 accordance with the contents of this note will comply with the following standards. Refer to the FX3G Series User's Manual - Hardware Edition
Compliance to EMC directive and LVD directive for the entire mechanical module Refer to the FX3GC Series User's Manual - Hardware Edition

(mounting hole pitch)

Revision H should be checked by the user / manufacturer. For more details please contact the Refer to the FX3U Series User's Manual - Hardware Edition
local Mitsubishi Electric sales site. Refer to the FX3UC Series User's Manual - Hardware Edition
Date July 2019

90(3.55")
80(3.15")
Refer to the MELSEC iQ-F FX5U User's Manual (Hardware)
Requirement for Compliance with EMC directive [9]
Refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)
The following products have shown compliance through direct testing (of the identified
standards below) and design analysis (through the creation of a technical construction FX3U-4AD 2.2.2 DIN Rail Mounting
This manual describes the part names, dimensions, mounting, and specifications

FX3U-4AD
of the product. Before use, read this manual and the manuals of all relevant file) to the European Directive for Electromagnetic Compatibility (2014/30/EU) when The product can be mounted on a DIN rail (DIN46227, 35mm width).
used as directed by the appropriate documentation. [8] 1) Fit the upper edge of the DIN rail mounting
products fully to acquire proficiency in handling and operating the product. Make 1)
sure to learn all the product information, safety information, and precautions. Attention groove (fig. A) onto the DIN rail.
9(0.36") 4(0.16")
Store this manual in a safe place so that it can be taken out and read whenever This product is designed for use in industrial applications. [7] [6] [5] 2) Press the product against the DIN rail.
87(3.43") 55(2.17")
necessary. Always forward it to the end user. Type: Programmable Controller (Open Type Equipment)
Registration: Phillips is a registered trademark of Phillips Screw Company. Models: MELSEC FX3U series manufactured Unit: mm (inches)
The company names, system names and product names mentioned in this manual from February 1st, 2006 FX3U-4AD MASS(Weight) : Approx. 0.2kg(0.44lbs) A
are either registered trademarks or trademarks of their respective companies. In Standard Remark [1] Direct mounting hole:2 holes of 4.5 (0.18") (mounting screw: M4 screw)
some cases, trademark symbols such as '' or '' are not specified in this manual. [2] Extension cable
EN61131-2:2007 Compliance with all relevant aspects of the
Effective July 2019 Programmable controllers standard. [3] POWER LED (green):
Specifications are subject to change without notice. - Equipment requirements and EMI Lit while 5V DC power is supplied from PLC. 2)
 2006 MITSUBISHI ELECTRIC CORPORATION tests • Radiated Emission [4] Terminal block for power supply (24V DC) (M3 terminal screw)
• Conducted Emission 3) Connect the extension cable (fig. B) to the
[5] Terminal block for analog input
main unit, input/output extension unit/
Safety Precautions (Read these precautions before use.) EMS
• Radiated electromagnetic field
[6] 24V LED (red): block, and special function unit/block on
This manual classifies the safety precautions into two categories: Lit while 24V DC power is supplied properly to terminals [24+] and [24-]. the left.
• Fast transient burst
• Electrostatic discharge [7] A/D LED (red): Flashes (at high speed) during A/D conversion. For the details of the extension cable
and .
• High-energy surge [8] DIN rail mounting hook connection, refer to the following manual.
• Voltage drops and interruptions [9] DIN rail mounting groove (35 mm (1.38") wide) Refer to the FX3G Series User's
Indicates that incorrect handling may cause hazardous • Conducted RF Manual - Hardware Edition
conditions, resulting in death or severe injury. • Power frequency magnetic field 1.2.2 Terminal Layout Refer to the FX3GC Series User's
Manual - Hardware Edition
Indicates that incorrect handling may cause hazardous Caution for EC Directive 24- V+ I+ V+ I+ V+ I+ V+ I+ Refer to the FX3U Series User's
conditions, resulting in medium or slight personal injury The FX3U-4AD have been found to be compliant to the European standards in 24+ VI- FG VI- FG VI- FG VI- Manual - Hardware Edition
or physical damage. the aforesaid manual and directive. However, for the very best performance Refer to the FX3UC Series User's
from what are in fact delicate measuring and controlled output device Mitsubishi CH1 CH2 CH3 CH4 Manual - Hardware Edition
Depending on the circumstances, procedures indicated by may also Electric would like to make the following points; Left side of the product Refer to the MELSEC iQ-F FX5U User's
cause severe injury. As analog devices are sensitive by nature, their use should be considered care- (Extension cable side) Manual (Hardware)
It is important to follow all precautions for personal safety. fully. For users of proprietary cables (integral with sensors or actuators), these Refer to the MELSEC iQ-F FX5UC User's
users should follow those manufacturers installation requirements. 2. Installation Manual (Hardware)
Associated Manuals Mitsubishi Electric recommend that shielded cables should be used. If NO other
EMC protection is provided, then users may experience temporary loss or INSTALLATION 3. Wiring
Manual name Manual No. Description accuracy between ±10% in very heavy industrial areas. PRECAUTIONS
However, Mitsubishi Electric suggest that if adequate EMC precautions are fol- WIRING
FX 3S /FX 3G /FX 3GC /  Use the product within the generic environment specifications described in PLC PRECAUTIONS
FX3U/FX3UC Series JY997D16701 Describes specifications for analog lowed for the users complete control system, users should expect accuracy as main unit manual (Hardware Edition).
control and programming method specified in this manual. Never use the product in areas with excessive dust, oily smoke, conductive dusts,  Make sure to cut off all phases of the power supply externally before
User's Manual MODEL CODE:
for FX3S/FX3G/FX3GC/FX3U/  Sensitive analog cable should not be laid in the same trunking or cable
- Analog Control 09R619 corrosive gas (salt air, Cl 2 , H 2 S, SO 2 , or NO 2 ), flammable gas, vibration or attempting installation or wiring work.
FX3UC Series PLC. conduit as high voltage cabling. Where possible users should run analog
Edition impacts, or expose it to high temperature, condensation, or rain and wind. Failure to do so may cause electric shock or damage to the product.
cables separately. If the product is used in such conditions, electric shock, fire, malfunctions,
FX 3S /FX 3G /FX 3GC /  Good cable shielding should be used. Ground the shield of the twisted deterioration or damage may occur.
FX3U/FX3UC Series JY997D16601 WIRING
Describes PLC programming for shielded cable at one point on the PLC side.  Do not touch the conductive parts of the product directly.
Programming Manual MODEL CODE: basic/applied instructions and PRECAUTIONS
 When reading analog values, EMC accuracy can be improved out by Doing so may cause device failures or malfunctions.
- Basic & Applied 09R517 devices. averaging the readings. This can be achieved either through functions on the  Install the product securely using a DIN rail or mounting screws.  Make sure to observe the following precautions in order to prevent
Instruction Edition special function block for analog input or through a users program in the  Install the product on a flat surface. malfunctions under the influence of noise:
FX3U Series PLC main unit. If the mounting surface is rough, undue force will be applied to the PC board,
FX3G Series JY997D31301 Explains the FX3G Series PLC thereby causing nonconformities. 1) Do not bundle the power line or twisted shielded cable together with or lay
 Please use FX3U-4AD while installed in a shielded enclosure. For the details, it close to the main circuit, high-voltage line or load line.
User’s Manual MODEL CODE: specifications for I/O, wiring,  When drilling screw holes or wiring, make sure that cutting and wiring debris do
refer to the following manual. Otherwise, noise disturbance and/or surge induction are likely to take
- Hardware Edition 09R521 installation, and maintenance. not enter the ventilation slits of the PLC.
Refer to the FX3G Series User's Manual - Hardware Edition place. As a guideline, lay the control line 100mm (3.94") or more away
Refer to the FX3GC Series User's Manual - Hardware Edition Failure to do so may cause fire, equipment failures or malfunctions.
FX3GC Series JY997D45401 Explains the FX3GC Series PLC from the main circuit, high-voltage line, or load line.
Refer to the FX3U Series User's Manual - Hardware Edition  Be sure to remove the dust proof sheet from the PLC's ventilation slits when
User's Manual MODEL CODE: specifications for I/O, wiring, installation work is completed.
Refer to the FX3UC Series User's Manual - Hardware Edition 2) Ground the shield wire or shield of the shielded cable at one point on the
- Hardware Edition 09R533 installation, and maintenance. Failure to do so may cause fire, equipment failures or malfunctions.
Refer to the MELSEC iQ-F FX5U User's Manual (Hardware) PLC. However, do not use common grounding with heavy electrical
FX3U Series JY997D16501 Explains the FX3U Series PLC Refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)  Connect extension cables securely to their designated connectors. systems.
User’s Manual MODEL CODE: specifications for I/O, wiring, Loose connections may cause malfunctions.
Note for compliance with EN61131-2:2007  Make sure to properly wire to the terminal blocks in accordance with the
- Hardware Edition 09R516 installation, and maintenance. following precautions.
 General note on the use of the power supply cable. 2.1 Arrangements
FX3UC Series JY997D28701 Explains the FX3UC Series PLC Failure to do so may cause electric shock, equipment failures, a short-circuit,
The FX3U-4AD unit requires that the cable used for power supply is 30m or less. The product connects on the right side of an PLC main unit or extension units/blocks
User’s Manual MODEL CODE: specifications for I/O, wiring, wire breakage, malfunctions, or damage to the product.
 When an external power supply is used, attach a ferrite core to the power cable and (including special function units/blocks).
- Hardware Edition 09R519 installation, and maintenance. For connection to FX3GC/FX3UC Series PLC or FX2NC Series PLC extension block, - The disposal size of the cable end should follow the dimensions
make 2 turns around.
FX2NC-CNV-IF or FX3UC-1PS-5V is required. described in the manual.
MELSEC iQ-F FX5U JY997D55301 Explains the FX5U PLC (Ferrite core used in Mitsubishi Electric's test E04SR401938 manufactured by
For connection to FX5U/FX5UC PLC, FX5-CNV-BUS or FX5-CNV-BUSC is required. - Tightening torque should follow the specification in the manual.
User’s Manual MODEL CODE: specifications for I/O, wiring, SEIWA ELECTRIC MFG. CO., LTD.)
For further information of installation arrangements, refer to the following manual. - Tighten the screws using a Phillips-head screwdriver No.2 (shaft diameter
(Hardware) 09R536 installation, and maintenance. 1. Outline For details, refer to the FX3G Series User's Manual - Hardware Edition. 6mm (0.24") or less). Make sure that the screwdriver does not touch the
MELSEC iQ-F FX5UC JY997D61401 Explains the FX5UC PLC The FX3U-4AD special function block for analog input converts four analog input values For details, refer to the FX3GC Series User's Manual - Hardware Edition. partition part of the terminal block.
(voltage, current) to digital values and transfers those digital values to the PLC main unit. For details, refer to the FX3U Series User's Manual - Hardware Edition.
User’s Manual MODEL CODE: specifications for I/O, wiring,
For details, refer to the FX3UC Series User's Manual - Hardware Edition.
(Hardware) 09R558 installation, and maintenance. For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware)
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)

3.1 Applicable Cable and Terminal Tightening Torque For details, refer to the FX3G Series User's Manual - Hardware Edition. 4.3 Power Supply Specifications 4.5 Input characteristics
The size of the terminal screws is M3. For details, refer to the FX3GC Series User's Manual - Hardware Edition. The input characteristics in each input mode are as follows.
The end disposal of the cable shows below. For details, refer to the FX3U Series User's Manual - Hardware Edition. Item Specification For the details of the input characteristics, refer to the following manual.
Tighten the terminal to a torque of 0.5 to 0.8Nm. For details, refer to the FX3UC Series User's Manual - Hardware Edition. Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual
For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware) A/D conversion 24V DC 10%, 90mA
Do not tighten terminal screws with a torque outside the abovementioned range. circuit driving power (24V DC power is supplied from the power connector.) - Analog Control Edition
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware)
Failure to do so may cause equipment failures or malfunctions.
5V DC, 110mA Input Analog input Digital output
 When one wire is connected to one terminal Another Another Another Input mode
PLC equipment PLC equipment PLC equipment CPU driving power (5V DC power is supplied from the internal power supply of mode range range
Terminal Crimp main unit.) 0 Voltage input mode -10 to +10V -32000 to +32000
3.2 (0.13") screw terminal
6.2 mm (0.24") Independent grounding Shared grounding Common grounding 4.4 Performance Specifications 1 Voltage input mode -10 to +10V -4000 to +4000
or less Best condition Good condition Not allowed
Description Voltage input mode
3.2 (0.13") 2 2 -10 to +10V -10000 to +10000
 The grounding wire size should be AWG 14 (2 mm ). Item Analog value direct indication
6.2 mm (0.24") Terminal  The grounding point should be close to the PLC, and all grounding wire Voltage input Current input
3 Current input mode 4 to 20mA 0 to 16000
or less should be as short as possible. Analog input -10 to +10V DC -20 to +20mA, 4 to 20mA DC
range (Input resistance: 200 k) (Input resistance: 250) 4 Current input mode 4 to 20mA 0 to 4000
 When two wires are connected to one terminal 4. Specifications
Offset*1 -10 to +9V*2 -20 to +17mA*3 Current input mode
3.2 (0.13") 5 4 to 20mA 4000 to 20000
STARTUP AND Analog value direct indication
6.2 mm (0.24") Terminal Crimp Gain*1 -9 to +10V*2 -17 to +30mA*3
screw terminal MAINTENANCE 6 Current input mode -20 to +20mA -16000 to +16000
or less PRECAUTIONS Maximum
6.3 mm (0.25") 15V 30mA 7 Current input mode -20 to +20mA -4000 to +4000
absolute input
or more  Do not disassemble or modify the PLC.
Doing so may cause fire, equipment failures, or malfunctions. Digital output With sign, 16bits, binary With sign, 15bits, binary Current input mode
3.2 (0.13") 8 -20 to +20mA -20000 to +20000
* For repair, contact your local Mitsubishi Electric representative. Analog value direct indication
6.2 mm (0.24") Resolution 0.32mV (20V/64000) 1.25A (40mA/32000)
Terminal  Do not drop the product or exert strong impact to it.
or less Doing so may cause damage.  0.5% (200A) for full scale
6.3 mm (0.25") of 40mA (when ambient
or more temperature is 25C5C and Nj⬉఼⬉ᄤѻક᳝ᆇ⠽䋼䰤ࠊՓ⫼ᷛ䆚㽕∖njⱘ㸼⼎ᮍᓣ
DISPOSAL a current of -20 mA to +20 mA
3.2 Power Supply Wiring PRECAUTIONS  0.3% (60mV) for full scale is input)
For the power supply wiring, refer to the following manual. of 20V (when ambient Same when input is 4mA to
 Please contact a certified electronic waste disposal company for the temperature is 25C5C) 20mA 1RWH7KLVV\PEROPDUNLVIRU&KLQDRQO\
Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual
environmentally safe recycling and disposal of your device. Total accuracy
- Analog Control Edition  0.5% (100mV) for full scale  1.0% (400A) for full scale
3.3 Wiring of Analog Input of 20V (when ambient of 40mA (when ambient ৿᳝᳝ᆇ⠽䋼ⱘৡ⿄ˈ৿᳝䞣ˈ৿᳝䚼ક
For the terminal layout, refer to Subsection 1.2.2 TRANSPORTATION AND temperature is 0C to 55C) temperature is 25C5C and
STORAGE PRECAUTIONS a current of -20 mA to +20 mA ǂᴀѻકЁ᠔৿᳝ⱘ᳝ᆇ ⠽䋼ⱘৡ⿄ˈ৿᳝䞣ˈ৿᳝䚼કབϟ㸼
External power is input) ᠔⼎DŽ
FX3U-4AD
supply wiring  The product is a precision instrument. During transportation, avoid impacts larger Same when input is 4mA to
+15V than those specified in the general specifications by using dedicated packaging 20mA ѻકЁ᳝ᆇ⠽䋼ⱘৡ⿄ঞ৿䞣
24+
24V DC *1 boxes and shock-absorbing palettes.
24- -15V Failure to do so may cause failures in the product. 500s number of selected channels
A/D conversion ᳝ᆇ⠽䋼
Grounding (If channels use the digital filter(s): 5ms number of selected
After transportation, verify operation of the product and check for damage of the time
(Ground resistance: channels)
100Ω or less) mounting part, etc. 䚼ӊৡ⿄ ໮⒈
*2 䪙 ∲ 䬝 ݁Ӌ䫀 ໮⒈㘨㣃
Input mode 0 Input mode 3 Ѡ㣃䝮
Using current input 3E +J &G &U9, 3%%
4.1 Applicable PLC Digital value Digital value 3%'(
Shield *3 ch 6.8kΩ +32640
ch Model name Applicability
V+ +32000 16400 ৃ㓪⿟ ໪໇ ƻ ƻ ƻ ƻ ƻ ƻ
*4 250Ω Ver. 1.00 or later (from first production)
I+ FX3G Series PLC 16000
᥻ࠊ఼ ॄࠋ෎ᵓ h ƻ ƻ ƻ ƻ ƻ
+10.2

Up to 8 blocks can be extended

VI- -10 0
200kΩ Ver. 1.40 or later (from first production) ᴀ㸼Ḑձ᥂6-7ⱘ㾘ᅮ㓪ࠊDŽ
FX3GC Series PLC*1
20.4

FG Up to 8 blocks can be extended +10

*2
-10.2

Using voltage input Input

ch Ver. 2.20 or later (from first production) voltage(V) ƻ㸼⼎䆹᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼*%7
Shield *3 6.8kΩ ch FX3U Series PLC 0 4 20
Up to 8 blocks can be extended -32000 㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
V+ Input
*5 250Ω Input -32640 current(mA) h㸼⼎䆹᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ*%7
I+ Ver. 1.30 or later (from the production manufactured in August, characteristics
FX3UC Series PLC*1 2004 with SER No. 48) *4 Input mode 6  㾘ᅮⱘ䰤䞣㽕∖DŽ
VI- Up to 8 blocks can be extended*2 Digital value
200kΩ ෎ѢЁ೑ᷛ‫ⱘ⊩ޚ‬খ㗗㾘Ḑ*%7
FG +16320
*2 Ver. 1.000 or later (from first production)
FX5U PLC*3 +16000
Up to 8 blocks can be extended
+20.4

ch : represents the channel number.

Ver. 1.000 or later (from first production)
FX5UC PLC*3 -20 This manual confers no industrial property rights or any rights of any other kind,
*1 For FX3G/FX3U/FX5U PLC (AC power type), the 24V DC service power Up to 6 blocks can be extended 0
supply is also available. nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be
The version number can be checked by monitoring D8001 as the last three digits +20
held responsible for any problems involving industrial property rights which may
-20.4

Input
*2 The [FG] terminal and the [ ] terminal are connected internally. indicate it. current(mA) occur as a result of using the contents noted in this manual.
There is no “FG” terminal for ch1. When using ch1, connect directly to the *1 An FX2NC-CNV-IF or FX3UC-1PS-5V is necessary to connect the FX3U-4AD with -16000 Warranty
[ ] terminal. the FX3GC/FX3UC PLC. -16320
Exclusion of loss in opportunity and secondary loss from warranty liability
*3 Use a 2-core twisted shield wire for analog input line, and separate it from *2 Up to 7 units can be connected to the FX3UC-32MT-LT(-2) PLC.
 The photo-coupler insulates the analog input area from the PLC. Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:
other power lines or inductive lines. *3 An FX5-CNV-BUS or FX5-CNV-BUSC is necessary to connect the FX3U-4AD (1) Damages caused by any cause found not to be the responsibility of Mitsubishi.
Insulation  The DC-DC converter insulates the analog input area from the
*4 For the current input, short-circuit the [V+] terminal and the [I+] terminal. with the FX5U/FX5UC PLC. method power supply unit. (2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
*5 If there is voltage ripple in the input voltage or there is noise in the external  Channels are not insulated from each other. (3) Special damages and secondary damages whether foreseeable or not, compensation for
4.2 General Specifications accidents, and compensation for damages to products other than Mitsubishi products.
wiring, connect a capacitor of approximately 0.1 to 0.47F 25 V.
For the general specifications other than the following, refer to the manual of the PLC Occupied (4) Replacement by the user, maintenance of on-site equipment, start-up test run
8 point (Count either the input or output points of the PLC.)
3.4 Grounding main unit. points and other tasks.
Grounding should be performed as stated below. The items other than the following are equivalent to those of the PLC main unit.
*1 Change the offset and gain values to change the input characteristics. However,
 The grounding resistance should be 100 or less. For details, refer to the FX3G Series User's Manual - Hardware Edition.
 Independent grounding should be performed for best results.
For details, refer to the FX3GC Series User's Manual - Hardware Edition. the resolution doesn’t change even when the offset and gain values change. For safe use
For details, refer to the FX3U Series User's Manual - Hardware Edition. When the analog value direct indication is enabled in the input mode 2, 5, or 8,
When independent grounding is not performed, perform "shared the offset value and the gain value don’t change.
For details, refer to the FX3UC Series User's Manual - Hardware Edition.  This product has been manufactured as a general-purpose part for general
grounding" of the following figure. For details, refer to the MELSEC iQ-F FX5U User's Manual (Hardware) *2 The offset and the gain should satisfy the following condition: industries, and has not been designed or manufactured to be incorporated in
For details, refer to the MELSEC iQ-F FX5UC User's Manual (Hardware) 1V  (Gain - Offset)  7.5V a device or system used in purposes related to human life.
Item Specification *3 The offset and the gain should satisfy the following condition:  Before using the product for special purposes such as nuclear power, electric
3mA  (Gain - Offset)  30mA power, aerospace, medicine or passenger movement vehicles, consult with
Dielectric withstand Mitsubishi Electric.
500V AC for one minute Between all terminals and *4 The input characteristics vary depending on the input mode to be used.
voltage  This product has been manufactured under strict quality control. However
ground terminal of PLC For the details of the input characteristics, refer to the following manual.
5 M  o r h i g h e r b y 5 0 0 V D C main unit when installing the product where major accidents or losses could occur if the
Insulation resistance Refer to the FX3S/FX3G/FX3GC/FX3U/FX3UC Series User’s Manual product fails, install appropriate backup or failsafe functions in the system.
insulation resistance tester
- Analog Control Edition

HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN