LCD 320 y 240 Dtfhvi
LCD 320 y 240 Dtfhvi
www.vishay.com
Vishay
320 x 240 Graphic LCD
FEATURES
• Type: Graphic
• Display format: 320 x 240 dots
• Built-in controller: RA8835 and SRAM
• Duty cycle: 1/240
• Built-in positive voltage output
• Touch screen option
• + 3.3 V power supply (also available for 5.0 V)
• LCD-320Y240H: Chinese version (RA8806 controller)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL CHARACTERISTICS
STANDARD VALUE
ITEM SYMBOL CONDITION UNIT
MIN. TYP. MAX.
VDD L level 0 - 0.2 VDD V
Input Voltage
VIO H level 0.5 VDD - VDD V
Supply Current IDD VDD = + 3.5 V - 33 - mA
- 20 °C - - -
Recommended LC Driving 0 °C - - -
Voltage for Normal Temperature V0 to VSS 25 °C - 18.7 - V
Version Module 50 °C - - -
70 °C - - -
LED Forward Voltage VF 25 °C - 25 - V
LED Forward Current IF 25 °C - - - mA
VF 25 °C - - -
CCFL
IF 25 °C - - -
EL Power Supply Current IEL VEL = 110 VAC, 400 Hz - - - mA
OPTIONS
PROCESS COLOR BACKLIGHT
STN STN STN FSTN STN
TN NONE LED EL CCFL
GRAY YELLOW BLUE B&W COLOR
- x x - x - x x x -
For detailed information, please see the “Product Numbering System” document.
DIMENSIONS in millimeters
94.7
93.8
81.4(VA) 8.6<Max>
76.78(AA) 5.6 47.05
HD66130TB0
1
39.95
36.7
HD66137TB0
320*240 dots
57.58(AA)
61.0(VA)
71.7
70.3
76.8
83.3
3.75 21.0
P1.0*21
CON2
1 22
17.1
A
DOTS SIZE
DETAIL
LCD Module.
3.General Specification
ITEM STANDARD VALUE UNIT
Input Voltage VI 0 炼 V DD V
5.Electrical Characteristics
ITEM SYMBOL CONDITION MIN. TYP. MAX. UNIT
Ta= -20ɗ 炼 炼 炼 V
Supply Voltage For
Vo-V SS Ta=25ɗ 20.3 21.0 21.7 V
LCD
Ta=+70ɗ 炼 炼 炼 V
6.Optical Characteristics
ITEM SYMBAL CONDITION MIN TYP MAX UNIT
Contrast Ratio CR 炼 炼 5 炼 炼
Non-selected state
X
ȴ
Bs
Bns
Y
ȧ
ġ ˍResponse time
90 %
Brightness
100 %
10 %
tr td
Rise Time Decay Time ( fall time tf )
VSS
V0 VR 10Kȟ
LCM
3.3V
+28V
VEE
VDD
39.95
6 RD
36.7
320*240 dots 7 DB0
57.58(AA)
61.0(VA)
8 DB1
71.7
70.3
76.8
83.3
9 DB2
3.75 25
10 DB3
P1.0*25
1 CON24 26 11 DB4
12 DB5
17.1
13 DB6
14 DB7
6.5 CN-FPC-20P/P1.0 15 CS
42.8
4- 3.0 14.3 (Down-Side) 16 RES
85.3
17 VEE+
18 SEL1
19 A
20 K
21 NC
22 NC
23 NC
24 NC
25 NC
0.24 26 NC
0.225
The non-specified tolerance of dimension is ¡ 0
À.2mm
0.225
0.24
DOTS SIZE
DETAIL
CL1
RD
Driver
M
Com1~80
WR FLM
A0
DB0~DB7 RA8835
CS
RES Controller
Com81~160
Driver
MPU
320X240 DOT
32K
SRAM
Com161~240
Driver
Power ON
Reset
*
Vdd
Power Circuit
Vss
VR Vo
20K
CL2
DB0~DB3
N.V.
Generator Frame PAD
Internal contrast adjustment.
*:6800 family or 8080family interface selectable.
FGND
1 V SS Ground
21 NC No connection
22 NC No connection
23 NC No connection
24 NC No connection
25 NC No connection
26 NC No connection
11.RELIABILITY
Content of Reliability Test (wide temperature, -20ɗ~70ɗ)
Environmental Test
Test Item Content of Test Test Condition Note
High Temperature Endurance test applying the high storage 80ɗ
2
storage temperature for a long time. 200hrs
Low Temperature Endurance test applying the high storage -30ɗ
1,2
storage temperature for a long time. 200hrs
Endurance test applying the electric stress
High Temperature 70ɗ
(Voltage & Current) and the thermal stress to the ——
Operation 200hrs
element for a long time.
Low Temperature Endurance test applying the electric stress under -20ɗ
1
Operation low temperature for a long time. 200hrs
The module should be allowed to stand at 60
ɗ,90%RH max
High Temperature/ For 96hrs under no-load condition excluding the 60ɗ,90%RH
1,2
Humidity Operation polarizer, 96hrs
Then taking it out and drying it at normal
temperature.
The sample should be allowed stand the
following 10 cycles of operation
-20ɗ 25ɗ 70ɗ
Thermal shock -20ɗ/70ɗ
——
resistance 10 cycles
30min 5min 30min
1 cycle
Total fixed amplitude :
1.5mm
Vibration Frequency :
Endurance test applying the vibration during
Vibration test 10~55Hz 3
transportation and using.
One cycle 60 seconds to
3 directions of X,Y,Z for
Each 15 minutes
VS=800V,RS=1.5kȟ
Endurance test applying the electric stress to the
Static electricity test CS=100pF ——
terminal.
1 time
Note3: Vibration test will be conducted to the product itself without putting it in a container.
Reverse Voltage VR 炼 炼 5 V
Color white
Note: The LED of B/L is drive by current only, drive voltage is for reference only.
drive voltage can make driving current under safety area (current between
minimum and maximum)
pin19 R R
A
B/L
K
pin20
LCM
Black or white
spots on 2.1 White and black spots on display ʀ0.25mm, no more than
02 LCD three white or black spots present. 2.5
(display 2.2 Densely spaced: No more than two spots or lines within 3mm
only)
Symbols Define:
x: Chip length y: Chip width z: Chip thickness
k: Seal width t: Glass thickness a: LCD side length
L: Electrode pad length:
ġ
ġ
ŻĻġńũŪűġŵũŪŤŬůŦŴŴġ źĻġńũŪűġŸŪťŵũġ ŹĻġńũŪűġŭŦůŨŵũġ
śʀIJİijŵġ ŏŰŵġŰŷŦųġŷŪŦŸŪůŨġŢųŦŢġ ŹʀIJİĹŢġ
IJİijŵ烋Żʀijŵġ ŏŰŵġŦŹŤŦŦťġIJİĴŬġ ġ ŹʀIJİĹŢġ
˞ŊŧġŵũŦųŦġŢųŦġijġŰųġŮŰųŦġŤũŪűŴĭġŹġŪŴġŵũŦġŵŰŵŢŭġŭŦůŨŵũġŰŧġŦŢŤũġŤũŪűįġ
ġ
2.5
2.5
ġ 2.5
IJIJįIJġŏŰġŶůĮŮŦŭŵŦťġŴŰŭťŦųġűŢŴŵŦġŮŢźġţŦġűųŦŴŦůŵġŰůġŵũŦġőńŃįġ 0.65
IJIJįijġŏŰġŤŰŭťġŴŰŭťŦųġūŰŪůŵŴĭġŮŪŴŴŪůŨġŴŰŭťŦųġŤŰůůŦŤŵŪŰůŴĭġŰŹŪťŢŵŪŰůġŰųġ
11 Soldering ŪŤŪŤŭŦįġ
IJIJįĴġŏŰġųŦŴŪťŶŦġŰųġŴŰŭťŦųġţŢŭŭŴġŰůġőńŃįġ
IJIJįĵġŏŰġŴũŰųŵġŤŪųŤŶŪŵŴġŪůġŤŰŮűŰůŦůŵŴġŰůġőńŃįġ
ġ
LCM, accessories or packages, manufactured and/or delivered to your company (including your
subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or
affiliated companies) do not intentionally contain any of the substances listed in all applicable EU
directives and regulations, including the following substances.
(1) Use the Sn/Ag/Cu soldering surface烊the surface of Pb-free solder is rougher than we used before.
(2) Heat-resistance temp.烉
15.Storage
1. Place the panel or module in the temperature 25°C±5°C and the humidity below 65% RH
2. Do not place the module near organics solvents or corrosive gases.
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.