LCD 320 y 240 Dtfhvi

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
320 x 240 Graphic LCD
FEATURES
• Type: Graphic
• Display format: 320 x 240 dots
• Built-in controller: RA8835 and SRAM
• Duty cycle: 1/240
• Built-in positive voltage output
• Touch screen option
• + 3.3 V power supply (also available for 5.0 V)
• LCD-320Y240H: Chinese version (RA8806 controller)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS

ITEM STANDARD VALUE UNIT STANDARD VALUE
ITEM SYMBOL UNIT
Module Dimension 94.7 x 71.7 MIN. TYP. MAX.
Viewing Area 81.4 x 61.0 Power
VDD to VSS 3.0 3.3 3.5
Dot Size 0.225 x 0.225 Supply
mm V
Dot Pitch 0.24 x 0.24 Input
VI . - VDD
Voltage
Mounting Hole 85.3 x 83.3
Note
Character Size n/a
• VSS = 0 V, VDD = 5.0 V
ELECTRICAL CHARACTERISTICS
STANDARD VALUE
ITEM SYMBOL CONDITION UNIT
MIN. TYP. MAX.
VDD L level 0 - 0.2 VDD V
Input Voltage
VIO H level 0.5 VDD - VDD V
Supply Current IDD VDD = + 3.5 V - 33 - mA
- 20 °C - - -
Recommended LC Driving 0 °C - - -
Voltage for Normal Temperature V0 to VSS 25 °C - 18.7 - V
Version Module 50 °C - - -
70 °C - - -
LED Forward Voltage VF 25 °C - 25 - V
LED Forward Current IF 25 °C - - - mA
VF 25 °C - - -
CCFL
IF 25 °C - - -
EL Power Supply Current IEL VEL = 110 VAC, 400 Hz - - - mA
OPTIONS
PROCESS COLOR BACKLIGHT
STN STN STN FSTN STN
TN NONE LED EL CCFL
GRAY YELLOW BLUE B&W COLOR
- x x - x - x x x -
For detailed information, please see the “Product Numbering System” document.
Revision: 27-Feb-13 1 Document Number: 37479

For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
INTERFACE PIN FUNCTIONS

PIN NO. SYMBOL FUNCTION
1 VSS Ground
2 VDD Power supply for logic
3 V0 Contrast adjustment
4 A0 H: Data, L: Instruction
5 WR 8080 family: Write signal, 6800 family: R/W signal
6 RD 8080 family: Read signal, 6800 family: Wnable clock
7 DB0 Data bus line
8 DB1 Data bus line
9 DB2 Data bus line
10 DB3 Data bus line
15 CS Chip enable
16 RES Reset
17 VEE Postitive voltage output
18 SEL1 8080 or 6800 intenface select 1:68 or 0:80
19 A Power supply for B/L
20 K Power supply for B/L
21 NC No connection
22 NC No connection
DIMENSIONS in millimeters
94.7
93.8
81.4(VA) 8.6<Max>
76.78(AA) 5.6 47.05
HD66130TB0
1
39.95
36.7
HD66137TB0
320*240 dots
57.58(AA)
61.0(VA)
71.7
70.3
76.8
83.3
3.75 21.0
P1.0*21
CON2
1 22
17.1
A
42.8 6.5 CN-FPC-20P/P1.0

4-±3.0 0.24 14.3
85.3 (Down-Side)
0.225
0.225
0.24
DOTS SIZE
DETAIL

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
1.Module Classification Information
LCD -320 Y 240 D -T F H -VI

c d e f g h i j k
1. Brand烉Vishay Intertechnology, Inc.
2. Horizontal Format: 320 columns
3. Display Type烉NɦCharacter Type, HɦGraphic Type,. YɦTab Type
4. Vertical Format: 240 Lines
5. Model serials number: D
6. Backlight NɦWithout backlight TɦLED, White
Type烉 BɦEL, Blue green AɦLED, Amber
DɦEL, Green RɦLED, Red
WɦEL, White OɦLED, Orange
FɦCCFL, White GɦLED, Green
YɦLED, Yellow Green PɦLED, Blue
7. LCD Mode烉 BɦTN Positive, Gray TɦFSTN Negative
NɦTN Negative,
GɦSTN Positive, Gray
YɦSTN Positive, Yellow Green
MɦSTN Negative, Blue
FɦFSTN Positive
8. LCD AɦReflective, N.T, 6:00 HɦTransflective, W.T,6:00
Polarizer DɦReflective, N.T, 12:00 KɦTransflective,W.T,12:00
Type/
Temperature GɦReflective, W. T, 6:00 CɦTransmissive, N.T,6:00
range/ View JɦReflective, W. T, 12:00 FɦTransmissive, N.T,12:00
direction
BɦTransflective, N.T,6:00 IɦTransmissive, W. T, 6:00
EɦTransflective, N.T.12:00 LɦTransmissive, W.T,12:00
9. Special Code V: Built in Positive Voltage
I: ICIST3031TA0# ICIST3032TA0#
Compliant with the ROHS Directions and regulations

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
2.Precautions in Use of LCD Module

(1)Avoid applying excessive shocks to the module or making any alterations or modifications to it.
(2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of
LCD Module.
(3)Don’t disassemble the LCM.
(4)Don’t operate it above the absolute maximum rating.

(5)Don’t drop, bend or twist LCM.
(6)Soldering: only to the I/O terminals.
(7)Storage: please storage in anti-static electricity container and clean environment.
(8)Supplier has the right to change the passive components

(9)Supplier has the right to change the PCB Rev.
3.General Specification
ITEM STANDARD VALUE UNIT
Number of dots 320x240 dots
Outline dimension 94.7(W)x 83.3(H)x 8.6max(T) mm
View area 81.4(W) x 61.0(H) mm
Active area 76.78(W)x 57.58(H) mm
Dot size 0.225(W)x 0.225(H) mm
Dot pitch 0.24(W)x 0.24(H) mm
LCD type FSTN Positive Transflective,
(In LCD production, It will occur slightly color difference. We can

only guarantee the same color in the same batch.)
View direction 6 o’clock
Backlight LED, White

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
4.Absolute Maximum Ratings

ITEM SYMBOL MIN. TYP. MAX. UNIT
Operating Temperature T OP -20 炼 +70 ɗ
Storage Temperature T ST -30 炼 +80 ɗ
Input Voltage VI 0 炼 V DD V
Supply Voltage For Logic V DD 0 炼 3.5 V
Supply Voltage For LCD Vo-V SS 0 炼 30 V
DC-DC converter output VEE 0 23
5.Electrical Characteristics
ITEM SYMBOL CONDITION MIN. TYP. MAX. UNIT
Logic Voltage V DD -V SS 炼 3.0 3.3 3.6 V
Ta= -20ɗ 炼炼炼 V
Supply Voltage For
Vo-V SS Ta=25ɗ 20.3 21.0 21.7 V
LCD
Ta=+70ɗ 炼炼炼 V
Input High Volt. V IH 炼 0.5V DD 炼 V DD V
Input Low Volt. V IL 炼 V SS 炼 0.2V DD V
Output High Volt. V OH 炼 2.4 炼炼 V
Output Low Volt. V OL 炼炼炼 0.4 V
Supply Current IDD 炼炼 33 炼 mA

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
6.Optical Characteristics
ITEM SYMBAL CONDITION MIN TYP MAX UNIT
(V)ȧ CRʁ2 30 炼 60 deg.

View Angle
(H)ȴ CRʁ2 -45 炼 45 deg.
Contrast Ratio CR 炼炼 5 炼炼
T rise 炼炼 200 300 ms

Response Time
T fall 炼炼 150 200 ms
6.1ġġ Definitions
ˍView Anglesġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ˍContrast Ratio
( Visual angle direction )

Z Brightness at selected state ( BS )
CR =
Brightness at non-selected state ( Bns )
Selected state
Brightness (%)
Non-selected state
X
ȴ
Bs
Bns
Y
ȧ
Operating voltage for LCD driving
ġ ˍResponse time
Nonselected Condition Selected Condition Nonselected Condition
90 %
Brightness
100 %
10 %
tr td
Rise Time Decay Time ( fall time tf )

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
7.Power Supply for LCD Module
VSS
V0 VR 10Kȟ
LCM
3.3V
+28V
VEE
VDD

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
8.Contour Drawing & Block diagram

94.7 CON24
93.8
81.4(VA) 8.6<Max> 1 VSS
76.78(AA) 5.6 47.05
2 VDD
3 VO
4 A0
1 5 WR
39.95
6 RD
36.7
320*240 dots 7 DB0
57.58(AA)
61.0(VA)
8 DB1
71.7
70.3
76.8
83.3
9 DB2
3.75 25
10 DB3
P1.0*25
1 CON24 26 11 DB4
12 DB5
17.1
13 DB6
14 DB7
6.5 CN-FPC-20P/P1.0 15 CS
42.8
4- 3.0 14.3 (Down-Side) 16 RES
85.3
17 VEE+
18 SEL1
19 A
20 K
21 NC
22 NC
23 NC
24 NC
25 NC
0.24 26 NC
0.225
The non-specified tolerance of dimension is ¡ 0
À.2mm
0.225
0.24
DOTS SIZE
DETAIL

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
CL1
RD
Driver
M
Com1~80
WR FLM
A0
DB0~DB7 RA8835
CS
RES Controller
Com81~160
Driver
MPU
320X240 DOT
32K
SRAM
Com161~240
Driver
Power ON
Reset
*
Vdd
Power Circuit
Seg1~80 Seg81~160 Seg161~240 Seg241~320
Driver Driver Driver Driver

Bias and
Vss
VR Vo
20K
CL2
DB0~DB3
N.V.
Generator Frame PAD
Internal contrast adjustment.
*:6800 family or 8080family interface selectable.
FGND

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
9.Interface Pin Function

Pin No. Symbol Level Description
1 V SS Ground
2 V DD Power supply for Logic
3 VO (Variable) Operation voltage LCD driving
4 A0 H/L H:Data L:Instruction
5 WR H 8080 family: Write signal, 6800 family: R/W signal
6 RD L 8080 family: Read signal, 6800 family: Enable clock
7-14 DB0-DB7 H/L DB0 Data bus line
15 CS H/L Chip Enable
16 RES H/L Reset
17 VEE Positive voltage output
18 SEL1 H/L 8080 OR 6800 Family Interface Select ; H:68xx , L:80xx
19 A Power supply for B/L
20 K Power supply for B/L
21 NC No connection
22 NC No connection
23 NC No connection
24 NC No connection
25 NC No connection
26 NC No connection

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
10. Timing Characteristics
PLEASE TO CONSULT RA8835 SPEC

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
11.RELIABILITY
Content of Reliability Test (wide temperature, -20ɗ~70ɗ)
Environmental Test
Test Item Content of Test Test Condition Note
High Temperature Endurance test applying the high storage 80ɗ
2
storage temperature for a long time. 200hrs
Low Temperature Endurance test applying the high storage -30ɗ
1,2
storage temperature for a long time. 200hrs
Endurance test applying the electric stress
High Temperature 70ɗ
(Voltage & Current) and the thermal stress to the ——
Operation 200hrs
element for a long time.
Low Temperature Endurance test applying the electric stress under -20ɗ
1
Operation low temperature for a long time. 200hrs
The module should be allowed to stand at 60
ɗ,90%RH max
High Temperature/ For 96hrs under no-load condition excluding the 60ɗ,90%RH
1,2
Humidity Operation polarizer, 96hrs
Then taking it out and drying it at normal
temperature.
The sample should be allowed stand the
following 10 cycles of operation
-20ɗ 25ɗ 70ɗ
Thermal shock -20ɗ/70ɗ
——
resistance 10 cycles
30min 5min 30min
1 cycle
Total fixed amplitude :
1.5mm
Vibration Frequency :
Endurance test applying the vibration during
Vibration test 10~55Hz 3
transportation and using.
One cycle 60 seconds to
3 directions of X,Y,Z for
Each 15 minutes
VS=800V,RS=1.5kȟ
Endurance test applying the electric stress to the
Static electricity test CS=100pF ——
terminal.
1 time
Note1: No dew condensation to be observed.

Note2: The function test shall be conducted after 4 hours storage at the normal
Temperature and humidity after remove from the test chamber.
Note3: Vibration test will be conducted to the product itself without putting it in a container.

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
12. Backlight Information

Specification
PARAMETER SYMBOL MIN TYP MAX UNIT TESTġġ
CONDITION
Supply Current ILED 72 82 120 mA V=3.5V
Supply Voltage V 3.4 3.5 3.6 V
Reverse Voltage VR 炼炼 5 V
Luminous IV 280 350 炼 CD/M2 ILED=82mA

Intensity
LED Life Time 炼 50K 炼 Hr. ILED䍺82mA
Color white
Note: The LED of B/L is drive by current only, drive voltage is for reference only.
drive voltage can make driving current under safety area (current between
minimum and maximum)
Drive from pin19,pin20
pin19 R R
A
B/L
K
pin20
LCM

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
13. Inspection specification

NO Item Criterion AQL
1.1 Missing vertical, horizontal segment, segment contrast defect.

1.2 Missing character , dot or icon.
1.3 Display malfunction.
Electrical 1.4 No function or no display.
01 0.65
Testing 1.5 Current consumption exceeds product specifications.
1.6 LCD viewing angle defect.
1.7 Mixed product types.
1.8 Contrast defect.
Black or white
spots on 2.1 White and black spots on display ʀ0.25mm, no more than
02 LCD three white or black spots present. 2.5
(display 2.2 Densely spaced: No more than two spots or lines within 3mm
only)
3.1 Round type : As following drawing

ȜľĩġŹġĬġźġĪġİġĳġ ġ ġ ġ ŔŊśņġ łŤŤŦűŵŢţŭŦġŒġŕŚġ
ġ ġ ġ ġ ġ ȜʀıįĲıġ łŤŤŦűŵġůŰġťŦůŴŦġ
2.5
LCD black ıįĲı烋Ȝʀıįĳıġ ĳġ
spots, white ıįĳı烋ȜʀıįĳĶġ Ĳġ
spots, ıįĳĶ烋Ȝġ ıġ
ġ
03 contaminati
on 3.2 Line type : (As following drawing)
(non-display
Length Width Acceptable Q TY
)
--- Wʀıįıĳ Accept no dense
LʀĴįı 0.02烋WʀıįıĴ 2.5
2
LʀĳįĶ 0.03烋WʀıįıĶġ
--- 0.05烋W As round type
If bubbles are visible, Size Ȝ Acceptable Q TY

judge using black spot Ȝʀıįĳı Accept no dense
Polarizer specifications, not easy
04 ıįĳı烋ȜʀıįĶı 3 2.5
bubbles to find, must check in
ıįĶı烋ȜʀĲįıı 2
specify direction.
Ĳįıı烋Ȝ 0
Total Q TY 3

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay

05 Scratches Follow NO.3 LCD black spots, white spots, contamination
Symbols Define:
x: Chip length y: Chip width z: Chip thickness
k: Seal width t: Glass thickness a: LCD side length
L: Electrode pad length:
6.1 General glass chip :

6.1.1 Chip on panel surface and crack between panels:
ŻĻġńũŪűġŵũŪŤŬůŦŴŴġ źĻġńũŪűġŸŪťŵũġ ŹĻġńũŪűġŭŦůŨŵũġ

Chipped śʀĲİĳŵġ ŏŰŵġŰŷŦųġŷŪŦŸŪůŨġŢųŦŢġ ŹʀĲİĹŢġ
06 2.5
glass Ĳİĳŵ烋Żʀĳŵġ ŏŰŵġŦŹŤŦŦťġĲİĴŬġ ġ ŹʀĲİĹŢġ
˞ŊŧġŵũŦųŦġŢųŦġĳġŰųġŮŰųŦġŤũŪűŴĭġŹġŪŴġŵŰŵŢŭġŭŦůŨŵũġŰŧġŦŢŤũġŤũŪűįġ
ġ
ķįĲįĳġńŰųůŦųġŤųŢŤŬĻġ
ġ
ġ
ŻĻġńũŪűġŵũŪŤŬůŦŴŴġ źĻġńũŪűġŸŪťŵũġ ŹĻġńũŪűġŭŦůŨŵũġ
śʀĲİĳŵġ ŏŰŵġŰŷŦųġŷŪŦŸŪůŨġŢųŦŢġ ŹʀĲİĹŢġ
Ĳİĳŵ烋Żʀĳŵġ ŏŰŵġŦŹŤŦŦťġĲİĴŬġ ġ ŹʀĲİĹŢġ
˞ŊŧġŵũŦųŦġŢųŦġĳġŰųġŮŰųŦġŤũŪűŴĭġŹġŪŴġŵũŦġŵŰŵŢŭġŭŦůŨŵũġŰŧġŦŢŤũġŤũŪűįġ
ġ

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay

ŔźŮţŰŭŴġĻġ
x: Chip length y: Chip width z: Chip thickness
k: Seal width t: Glass thickness a: LCD side length
L: Electrode pad length
6.2 Protrusion over terminal :
6.2.1 Chip on electrode pad :
źĻġńũŪűġŸŪťŵũġ ġ ŹĻġńũŪűġŭŦůŨŵũġ ŻĻġńũŪűġŵũŪŤŬůŦŴŴġ

źʀıįĶŮŮġ ŹʀĲİĹŢġ ıġ 烋ġ Żġ ʀġ ŵġ
ķįĳįĳġŏŰůĮŤŰůťŶŤŵŪŷŦġűŰųŵŪŰůĻġ
ġ
źĻġńũŪűġŸŪťŵũġ ġ ŹĻġńũŪűġŭŦůŨŵũġ ŻĻġńũŪűġŵũŪŤŬůŦŴŴġ
źʀġ ōġ ŹʀĲİĹŢġ ıġ 烋ġ Żġ ʀġ ŵġ
˞ŊŧġŵũŦġŤũŪűűŦťġŢųŦŢġŵŰŶŤũŦŴġŵũŦġŊŕŐġŵŦųŮŪůŢŭĭġŰŷŦųġĳİĴġŰŧġŵũŦġŊŕŐġ
ŮŶŴŵġųŦŮŢŪůġŢůťġţŦġŪůŴűŦŤŵŦťġŢŤŤŰųťŪůŨġŵŰġŦŭŦŤŵųŰťŦġŵŦųŮŪůŢŭġ
ŴűŦŤŪŧŪŤŢŵŪŰůŴįġ
˞ŊŧġŵũŦġűųŰťŶŤŵġŸŪŭŭġţŦġũŦŢŵġŴŦŢŭŦťġţźġŵũŦġŤŶŴŵŰŮŦųĭġŵũŦġŢŭŪŨůŮŦůŵġ
ŮŢųŬġůŰŵġţŦġťŢŮŢŨŦťįġ
ķįĳįĴġŔŶţŴŵųŢŵŦġűųŰŵŶţŦųŢůŤŦġŢůťġŪůŵŦųůŢŭġŤųŢŤŬįġ
ġ
źĻġŸŪťŵũġ ġ ŹĻġŭŦůŨŵũġ
ġ
źʀĲİĴōġ Źġ ʀġ Ţġ
ġ
ġ
06 Glass crack ġ 2.5
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ
ġ

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay

07 Cracked glass ŕũŦġōńŅġŸŪŵũġŦŹŵŦůŴŪŷŦġŤųŢŤŬġŪŴġůŰŵġŢŤŤŦűŵŢţŭŦįġ 2.5
ġ
ĹįĲġŊŭŭŶŮŪůŢŵŪŰůġŴŰŶųŤŦġŧŭŪŤŬŦųŴġŸũŦůġŭŪŵįġ 0.65
Backlight ĹįĳġŔűŰŵŴġŰųġŴŤųŢŵŤũŦťġŵũŢŵġŢűűŦŢųġŸũŦůġŭŪŵġŮŶŴŵġţŦġūŶťŨŦťįġŖŴŪůŨġ 2.5
08
elements ōńŅġŴűŰŵĭġŭŪůŦŴġŢůťġŤŰůŵŢŮŪůŢŵŪŰůġŴŵŢůťŢųťŴįġ
ĹįĴġŃŢŤŬŭŪŨũŵġťŰŦŴůȽŵȽŵġŭŪŨũŵġŰųġŤŰŭŰųġŸųŰůŨįġ 0.65
ġ
ġ
ĺįĲġŃŦŻŦŭġŮŢźġůŰŵġũŢŷŦġųŶŴŵĭġţŦġťŦŧŰųŮŦťġŰųġũŢŷŦġŧŪůŨŦųűųŪůŵŴĭġ
2.5
09 Bezel ŴŵŢŪůŴġŰųġŰŵũŦųġŤŰůŵŢŮŪůŢŵŪŰůįġ
0.65
ĺįĳġŃŦŻŦŭġŮŶŴŵġŤŰŮűŭźġŸŪŵũġūŰţġŴűŦŤŪŧŪŤŢŵŪŰůŴįġ
ġ
ĲıįĲġńŐŃġŴŦŢŭġŮŢźġůŰŵġũŢŷŦġűŪůũŰŭŦŴġŭŢųŨŦųġŵũŢůġıįĳŮŮġŰųġ
ŤŰůŵŢŮŪůŢŵŪŰůįġ 2.5
ĲıįĳġńŐŃġŴŦŢŭġŴŶųŧŢŤŦġŮŢźġůŰŵġũŢŷŦġűŪůũŰŭŦŴġŵũųŰŶŨũġŵŰġŵũŦġŊńįġ
ĲıįĴġThe height of the COB should not exceed the height 2.5
indicated in the assembly diagram. 0.65
10.4 There may not be more than 2mm of sealant outside the
seal area on the PCB. And there should be no more than 2.5
three places.
10.5 No oxidation or contamination PCB terminals.
10.6 Parts on PCB must be the same as on the production 2.5
10 PCBˣCOB 0.65
characteristic chart. There should be no wrong parts,
missing parts or excess parts.
10.7 The jumper on the PCB should conform to the product
characteristic chart. 0.65
10.8 If solder gets on bezel tab pads, LED pad, zebra pad or
screw hold pad, make sure it is smoothed down. 2.5
Ĳıįĺ The Scraping testing standard for Copper Coating of PCB
2.5
X
Y
X * Y<=2mm2ġ
2.5
2.5
ġ 2.5
ĲĲįĲġŏŰġŶůĮŮŦŭŵŦťġŴŰŭťŦųġűŢŴŵŦġŮŢźġţŦġűųŦŴŦůŵġŰůġŵũŦġőńŃįġ 0.65
ĲĲįĳġŏŰġŤŰŭťġŴŰŭťŦųġūŰŪůŵŴĭġŮŪŴŴŪůŨġŴŰŭťŦųġŤŰůůŦŤŵŪŰůŴĭġŰŹŪťŢŵŪŰůġŰųġ
11 Soldering ŪŤŪŤŭŦįġ
ĲĲįĴġŏŰġųŦŴŪťŶŦġŰųġŴŰŭťŦųġţŢŭŭŴġŰůġőńŃįġ
ĲĲįĵġŏŰġŴũŰųŵġŤŪųŤŶŪŵŴġŪůġŤŰŮűŰůŦůŵŴġŰůġőńŃįġ
ġ

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay

ġ
ĲĳįĲġŏŰġŰŹŪťŢŵŪŰůĭġŤŰůŵŢŮŪůŢŵŪŰůĭġŤŶųŷŦŴġŰųĭġţŦůťŴġŰůġŪůŵŦųŧŢŤŦġőŪůġ 2.5
ĩŐōŃĪġŰŧġŕńőįġ
ĲĳįĳġŏŰġŤųŢŤŬŴġŰůġŪůŵŦųŧŢŤŦġűŪůġĩŐōŃĪġŰŧġŕńőįġ 0.65
ĲĳįĴġŏŰġŤŰůŵŢŮŪůŢŵŪŰůĭġŴŰŭťŦųġųŦŴŪťŶŦġŰųġŴŰŭťŦųġţŢŭŭŴġŰůġűųŰťŶŤŵįġ 2.5
2.5
ĲĳįĵġŕũŦġŊńġŰůġŵũŦġŕńőġŮŢźġůŰŵġţŦġťŢŮŢŨŦťĭġŤŪųŤŶŪŵŴįġ
2.5
ĲĳįĶġŕũŦġŶűűŦųŮŰŴŵġŦťŨŦġŰŧġŵũŦġűųŰŵŦŤŵŪŷŦġŴŵųŪűġŰůġŵũŦġŪůŵŦųŧŢŤŦġűŪůġ
ŮŶŴŵġţŦġűųŦŴŦůŵġŰųġŭŰŰŬġŢŴġŪŧġŪŵġŤŢŶŴŦŴġŵũŦġŪůŵŦųŧŢŤŦġűŪůġŵŰġŴŦŷŦųįġ 2.5
General ĲĳįķġŕũŦġųŦŴŪťŶŢŭġųŰŴŪůġŰųġŵŪůġŰŪŭġŰŧġŴŰŭťŦųŪůŨġĩŤŰŮűŰůŦůŵġŰųġŤũŪűġ
12
appearance ŤŰŮűŰůŦůŵĪġŪŴġůŰŵġţŶųůŦťġŪůŵŰġţųŰŸůġŰųġţŭŢŤŬġŤŰŭŰųįġ 2.5
ĲĳįĸġŔŦŢŭŢůŵġŰůġŵŰűġŰŧġŵũŦġŊŕŐġŤŪųŤŶŪŵġũŢŴġůŰŵġũŢųťŦůŦťįġ 0.65
ĲĳįĹġőŪůġŵźűŦġŮŶŴŵġŮŢŵŤũġŵźűŦġŪůġŴűŦŤŪŧŪŤŢŵŪŰůġŴũŦŦŵįġ 0.65
ĲĳįĺġōńŅġűŪůġŭŰŰŴŦġŰųġŮŪŴŴŪůŨġűŪůŴįġ 0.65
ĲĳįĲıġőųŰťŶŤŵġűŢŤŬŢŨŪůŨġŮŶŴŵġŵũŦġŴŢŮŦġŢŴġŴűŦŤŪŧŪŦťġŰůġűŢŤŬŢŨŪůŨġ
0.65
ŴűŦŤŪŧŪŤŢŵŪŰůġŴũŦŦŵįġ
ĲĳįĲĲġőųŰťŶŤŵġťŪŮŦůŴŪŰůġŢůťġŴŵųŶŤŵŶųŦġŮŶŴŵġŤŰůŧŰųŮġŵŰġűųŰťŶŤŵġ
ŴűŦŤŪŧŪŤŢŵŪŰůġŴũŦŦŵįġ
ġ

LCD-320Y240D-TFH-VI
www.vishay.com
Vishay
14. Material List of Components for RoHS

1. Declaration that all of or part of products (with the mark “Y” in code), including, but not limited to, the
LCM, accessories or packages, manufactured and/or delivered to your company (including your
subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or
affiliated companies) do not intentionally contain any of the substances listed in all applicable EU
directives and regulations, including the following substances.
Exhibit A烉The Harmful Material List
Material (Cd) (Pb) (Hg) (Cr6+) PBBs PBDEs
Limited 100 1000 1000 1000 1000 1000
Value ppm ppm ppm ppm ppm ppm
Above limited value is set up according to RoHS.
2.Process for RoHS requirement烉
(1) Use the Sn/Ag/Cu soldering surface烊the surface of Pb-free solder is rougher than we used before.
(2) Heat-resistance temp.烉
Reflow烉250C, 30 seconds Max.烊

Connector soldering wave or hand soldering烉320C, 10 seconds max.
(3) Temp. curve of reflow, max. Temp.烉235±5C烊
Recommended customer’s soldering temp. of connector烉280C, 3 seconds.
15.Storage
1. Place the panel or module in the temperature 25°C±5°C and the humidity below 65% RH
2. Do not place the module near organics solvents or corrosive gases.
3. Do not crush, shake, or jolt the module.

Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023 1 Document Number: 91000

LCD 320 y 240 Dtfhvi

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LCD 320 y 240 Dtfhvi

Uploaded by

Copyright:

Available Formats

LCD-320Y240D-TFH-VI

MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS

Revision: 27-Feb-13 1 Document Number: 37479

INTERFACE PIN FUNCTIONS

42.8 6.5 CN-FPC-20P/P1.0

Revision: 27-Feb-13 2 Document Number: 37479

1.Module Classification Information

LCD -320 Y 240 D -T F H -VI

Revision: 27-Feb-13 3 Document Number: 37479

2.Precautions in Use of LCD Module

(3)Don’t disassemble the LCM.

(4)Don’t operate it above the absolute maximum rating.

(6)Soldering: only to the I/O terminals.

(7)Storage: please storage in anti-static electricity container and clean environment.

(8)Supplier has the right to change the passive components

Number of dots 320x240 dots

Outline dimension 94.7(W)x 83.3(H)x 8.6max(T) mm

View area 81.4(W) x 61.0(H) mm

Active area 76.78(W)x 57.58(H) mm

Dot size 0.225(W)x 0.225(H) mm

Dot pitch 0.24(W)x 0.24(H) mm

LCD type FSTN Positive Transflective,

(In LCD production, It will occur slightly color difference. We can

View direction 6 o’clock

Backlight LED, White

Revision: 27-Feb-13 4 Document Number: 37479

4.Absolute Maximum Ratings

Operating Temperature T OP -20 炼 +70 ɗ

Storage Temperature T ST -30 炼 +80 ɗ

Supply Voltage For Logic V DD 0 炼 3.5 V

Supply Voltage For LCD Vo-V SS 0 炼 30 V

DC-DC converter output VEE 0 23

Logic Voltage V DD -V SS 炼 3.0 3.3 3.6 V

Input High Volt. V IH 炼 0.5V DD 炼 V DD V

Input Low Volt. V IL 炼 V SS 炼 0.2V DD V

Output High Volt. V OH 炼 2.4 炼 炼 V

Output Low Volt. V OL 炼 炼 炼 0.4 V

Supply Current IDD 炼 炼 33 炼 mA

Revision: 27-Feb-13 5 Document Number: 37479

(V)ȧ CRʁ2 30 炼 60 deg.

T rise 炼 炼 200 300 ms

ˍView Anglesġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ˍContrast Ratio

( Visual angle direction )

Operating voltage for LCD driving

Nonselected Condition Selected Condition Nonselected Condition

Revision: 27-Feb-13 6 Document Number: 37479

7.Power Supply for LCD Module

Revision: 27-Feb-13 7 Document Number: 37479

8.Contour Drawing & Block diagram

Revision: 27-Feb-13 8 Document Number: 37479

Seg1~80 Seg81~160 Seg161~240 Seg241~320

Driver Driver Driver Driver

Revision: 27-Feb-13 9 Document Number: 37479

9.Interface Pin Function

2 V DD Power supply for Logic

3 VO (Variable) Operation voltage LCD driving

4 A0 H/L H:Data L:Instruction

5 WR H 8080 family: Write signal, 6800 family: R/W signal

6 RD L 8080 family: Read signal, 6800 family: Enable clock

7-14 DB0-DB7 H/L DB0 Data bus line

15 CS H/L Chip Enable

16 RES H/L Reset

Output High Volt. V OH 炼 2.4 炼炼 V

Output Low Volt. V OL 炼炼炼 0.4 V

Supply Current IDD 炼炼 33 炼 mA

T rise 炼炼 200 300 ms