Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 42 views

    Spot Welding Instructions

    Uploaded by

    Hyeseong Choi
    This document provides instructions for spot welding including descriptions of: 1. The cycle mode that dictates the sequence of events for 50 possible schedules including non-repeat, repeat, chained, successive, and conditional modes. 2. The slope mode that provides a way to gradually increase or decrease current using upslope and downslope modes. 3. The valve mode that activates up to three solenoid valves based on a valve code to control which valves are on or off.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Spot Welding Instructions

    Uploaded by

    Hyeseong Choi
    42 views3 pages
    This document provides instructions for spot welding including descriptions of: 1. The cycle mode that dictates the sequence of events for 50 possible schedules including non-repeat, repeat, chained, successive, and conditional modes. 2. The slope mode that provides a way to gradually increase or decrease current using upslope and downslope modes. 3. The valve mode that activates up to three solenoid valves based on a valve code to control which valves are on or off.

    Original Title

    Spot welding Instructions

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for spot welding including descriptions of: 1. The cycle mode that dictates the sequence of events for 50 possible schedules including non-repeat, repeat, chained, successive, and conditional modes. 2. The slope mode that provides a way to gradually increase or decrease current using upslope and downslope modes. 3. The valve mode that activates up to three solenoid valves based on a valve code to control which valves are on or off.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    42 views3 pages

    Spot Welding Instructions

    Uploaded by

    Hyeseong Choi
    This document provides instructions for spot welding including descriptions of: 1. The cycle mode that dictates the sequence of events for 50 possible schedules including non-repeat, repeat, chained, successive, and conditional modes. 2. The slope mode that provides a way to gradually increase or decrease current using upslope and downslope modes. 3. The valve mode that activates up to three solenoid valves based on a valve code to control which valves are on or off.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Digital Shovel Holdings Inc.

    P 647 607 9729


    www.digitalshovel.com

    Spot Welding Instructions

    1. CONTROL PANEL LAYOUT

    1
    633 Coronation Drive
    Scarborough, ON
    M1E 2K4
    Digital Shovel Holdings Inc.

    P 647 607 9729


    www.digitalshovel.com

    CYCLE MODE
    Each of the 50 possible schedules has a cycle mode parameter that dictates the sequence of events that will
    follow in an initiation.

    CYCLE MODE MODE Description

    The control can be initiated for only one sequence


    00 NON REPEAT

    After initiation, the control internally re-initiates as long as the initiation


    01 REPEAT
    switch is maintained closed

    02 CHAINED Several schedules can be chained together so that several consecutive


    schedules can be sequenced from one initiation

    Several schedules can be sequenced successively upon separate initiations


    03 SUCCESSIVE

    04 CONDITIONAL Valves remain active at the end of HOLD (this is indicated by blinking HOLD
    SUCCESSIVE indicator LED ) until control is re- initiated and next schedule will be
    sequenced

    05 WAIT HERE After FS3 initiation, wait either in SQUEEZE or WELD COOL or HOLD part of
    the sequence until control is re- initiated with FS7 or FS11 and schedule 10 or
    20 will be sequenced

    SLOPE MODE
    Slope mode provides a way to change the current gradually, either Increasing or decreasing. The gradual
    increase or decrease is determined by the Slope current and the number of slope cycles in the SLOPE COUNT

    SLOPE MODE MODE Description

    Slope is disabled
    00 NO SLOPE

    Causes current to start from a low level and increase for a predetermined
    01 UPSLOPE
    number of cycles

    02 DOWNSLOPE Causes current to start from a high level and reduce for a predetermined
    number of cycles

    2
    633 Coronation Drive
    Scarborough, ON
    M1E 2K4
    Digital Shovel Holdings Inc.

    P 647 607 9729


    www.digitalshovel.com

    VALVE MODE
    The three solenoid valves are activates based on the code shown below

    VALVE DESCRIPTION Valve Outputs on TS1


    CODE VALVE Indicator LEDs

    VALVE3 VALVE2 VALVE1

    00 OFF OFF OFF All valves off None

    01 OFF OFF ON Valve 1 active SV1 SV2

    02 OFF ON OFF Valve 2 active SV3 SV4

    03 OFF ON ON Valves 1 & 2 active SV1 SV2 & SV3 SV4

    04 ON OFF OFF Valve 3 active SV5 SV6

    05 ON OFF ON Valves 1 & 3 active SV1 SV2 & SV5 SV6

    06 ON ON OFF Valves 2 & 3 active SV3 SV4 & SV5 SV6

    07 ON ON ON Valves 1, 2 & 3 active SV1 SV2, SV3 SV4 & SV5 SV6

    3
    633 Coronation Drive
    Scarborough, ON
    M1E 2K4

    You might also like