Hydrogen Broucher
Hydrogen Broucher
❖ FEATURES
• Carbonaceous process
• Satisfactory concentration of hydrogen
• Effective utilisation of renewable resources
• More compact design
❖ APPLICATIONS
• Stationary and mobile applications
• Industrial applications
❖ ADVANTAGES
• Less maintenance
• More production
HYDROGEN GENERATION BY USING PEM ELECTROLYSER: ❖ FEATURES
Our R&D team is designing and developing the PEM Electrotyper which will be best suitable • Autofill water level control
for renewable energy sources with less and easy maintenance. The team can design a • Automatic Leak Detection
product with increased H2 production capacity along with the purity based on existing
• Compact in size and quiet operation
model. We are also providing engineering services to our client for developing a new model
of PEM electrolyser as per their requirement. • Minimum Maintenance
• Modular and Upgradeable
❖ APPLICATIONS
• Biofuel Production
• Energy Storage
• Automobile Industry
• Medical Applications
• Fuel for Fuel Cells
❖ ADVANTAGES
• High current densities
• Compact system design
• Quick response
• Greater Hydrogen production rate with
high purity of gases
• Higher energy efficiency
• High dynamic operation
PEM ELECTROLYSER
HYDROGEN GENERATION BY USING SMR METHOD:
Most commonly used industrial method for production of hydrogen gas. Generation of hydrogen through SMR process includes three
steps: a) Natural Gas Compression Unit, b) SMR Reactor and PSA Unit, c) Hydrogen Compression Unit. The Natural Gas Compression Unit
is the pre-processing of the natural gas before entering into the SMR reactor.
❖ FEATURES ❖ APPLICATION
• Same stack is used as an electrolyser and fuel cell. • Containerized hydrogen and oxygen generation
• Solar Power is used as input. package.
• Steam is obtained as a by product and circulated in both the modes • Commercial hydrogen and oxygen is available with
❖ ADVANTAGES 99.999% purity.
• Electricity is commercially available and can be
• No greenhouse gas emission
used at remote areas.
• Low-cost technology for generation hydrogen
Stack
HYDROGEN GENERATION BY USING THERMOCHEMICAL GASIFICATION METHOD:
Thermochemical Gasification is a method to produce hydrogen from Biomass / Municipal Solid Waste. Our team is dedicatedly working
on development of reactors used for the method which will produce very less amount of greenhouse gasses. We are also working to the
technology to collect the carbon in solid form for further utilization.
❖ FEATURES
• Eco friendly technology
• Solid carbon is obtained as a by product
• No tar is produced
❖ APPLICATION
• Municipal solid waste can be utilized which reduces the pollution.
• Agricultural wastes can be used for hydrogen generation.
• Some limited industrial wastes can also be used.
• It is widely used in the chemical industry to produce methanol,
activated carbon, charcoal and other substances from wood.
• Synthetic gas produced from the conversion of waste using
pyrolysis can be used in gas or steam turbines for producing
electricity.
❖ ADVANTAGES
• It minimizes the greenhouse gas emission
• Rapid process in construction gasification power plant Thermochemical Gasification
• Low-cost technology for generation hydrogen
• It can also reduce the risk of water pollution
LIQUID HYDROGEN HORIZONTAL STORAGE TANK:
Liquid storage of hydrogen is one of the most complicated storage systems, we provide storage vessels as per the consumer’s
requirements according to the code provided by ASME. Our team is ready to take any kind cryogenic storage system challenges.
Our R&D people are work towards new storage tank materials for H2 storage
❖ FEATURES
• Multi-layered super insulations.
• Vacuum chambered.
• Suitable for other gases also N2, He, LNG etc.
• Fewer potential risks compared with compressed gas.
• Orientation: Horizontal or Vertical
❖ APPLICATIONS
• Space applications used as a primary rocket propellant.
• Metallurgical industry, hydrogen is used to reduce metal oxides and
prevent oxidation in heat treating certain metals and alloys.
• Transported as a liquid to get more efficient in space.
• Refining of petroleum.
• Used as a fuel to hybrid engine in automobile areas
❖ ADVANTAGES
• High storage densities.
• Less storage space sufficient.
• Used as a fuel.
LH2 HORIZONTAL STORAGE TANK
18M3 LIQUID HYDROGEN VERTICAL TANK – CASE STUDY
❖ CHALLENGES ❖ SOLUTION
• Multi-layered super insulations. • Complete design of 18K LH2 tank
• Design and Development of 18K LH2 • Provided the good solution for I/V & supports, O/V
Vertical Tank & supports
• Preparation of P & ID and GA • Designed pressure&non-pressure part
• Design of Inner vessel • Done piping routing& Analysis using CAE software.
• Design of Inner vessel supports • Done FEA by using Ansys software.
• Design of Outer vessel • Executed Modeling & drafting
• Design of O/V supports • Provided design Vaporizer and PBU
• Design of interspace piping • Identified areas where we can reduce the thk of
• FE analysis of complete tank the pressure components and reduced weight of
• CAE Piping Analysis the product
• Design of Vaporizer ❖ RESULT
• Design Pressure Building Unit
• Reduced the overdesign and built the product
• Wind and Seismic Design
under cost limit
• Lifting Lug Design
• Modeling and Drafting
• Design of Safety Valve
• Evaluation of Net Evaporation Rate (NER)
❖ BUSINESS BENEFITS
• Reduced the product cost.
• Provided suitable design requirements to the
product.
• Delivery of the product within the time frame
• Complete R & D on the Product.
HYDROGEN SEMI TRAILER:
• Cryogenic Semi-Trailers are double walled trailers designed for large volume transportation of LNG over long distance
• Low center of gravity coupled with light weight FEA analyzed based under carriage helps maximize the payload and optimize the
logistics operation.
• Optional design in line with the conditions of the operation territory .
• Perfect ergonomic design for operation and service.
• User-friendly design minimum operating period.
Features :
• Bellow has been used to over come the
contraction and vibration problem
• Super insulation has been provided as
the fluid is liquid hydrogen.
• Spacers has been provided either side
of the bellow for easy insertion.
Length 6 meters
Features:
• Heavy Vehicle
• Aircrafts
• Industrial Applications
• Less cost with high compact PLATE & SHELL HEAT EXCHANGER
• Less weight CAPACITY: 50Kw
• Easy installation
Insulation MLI
Material AL 6061-T6
❖ FEATURES
• Fuel flexibility
• High efficiency over 60%
• Zero emission
• Good load response
❖ APPLICATIONS
• Transport applications
• Stationary fuel-cell applications
• Portable fuel-cell applications
• Emergency backup power for
industries/commercial/residential buildings
❖ ADVANTAGES
• High power densities
• Proven long operating life
• Very low GHG emission
• Silent and smooth operation
• Less maintenance and more economic PROTON EXCHANGE MEMBRANE (PEM) FUEL CELL
Liquid Hydrogen
Transportation Through
Vacuum Jacketed Piping
Hydrogen Projects
Liquid Hydrogen
Transportation Through
Vacuum Jacketed Piping
Generation of Hydrogen
Hydrogen ISO Container through Municipal Solid
Waste
Hydrogen Generation
Plate & Shell Heat exchanger Through SMR