CP1H

CP series CP1H CPU Unit
CP1H-X@@D@-@/CP1H-Y@@D@-@
CP1H-XA@@D@-@
4 Axis Position Control and Comprehensive Programmable Controller
• The CP1H-X with pulse outputs for 4 axes.
• The CP1H-Y with 1-MHz pulse I/O.
• The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O.
Features
• Pulse output for 4 axes. Advanced power for high-precision positioning control.
• High-speed counters. Differential phases for 4 axes.
Easily handles multi-axis control with a single unit.
• Eight interrupt inputs are built in. Faster processing of approximately 500 instructions speeds up the entire system.
• Serial communications. Two ports. Select Option Boards for either RS-232C or RS-485 communications.
• Ethernet Communications. Enabled by using an Option Board. Two ports can be used as an Ethernet port to
perform. Ethernet communications between the CP1H and a host computer.
• Built-in Analog I/O. XA CPU Units provide 4 input words and 2 output words.
• USB Peripheral Port. Another standard feature.
• The structured text (ST) language. Makes math operations even easier.
• Can be used for the CP1W series and CJ series Unit. The extendibility of it is preeminently good.
• LCD displays and settings. Enabled using Option Board.
1
CP1H
Model Number Structure
■ Model Number Legend (Not all models that can be represented with the model number legend can necessarily be produced.)
CP1H-@@D@-@
(1) (2) (3) (4)
1. Class 3. Output classification

X : Basic model R : Relay output
XA : Built-in analog I/O terminals T : Transistor Output (sinking)
Y : Dedicated pulse I/O terminals T1 : Transistor Output (sourcing)
2. Number of Built-In number I/O points 4. Power supply
40 : 40 I/O points A : AC
20 : 20 I/O points D : DC
Ordering Information
Applicable standards
Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each
model.
■ CPU Units
Specifications
CPU Unit Power Model
CPU type Output method Inputs Outputs
supply
CP1H-X CPU Units AC power

Memory capacity: 20K steps Relay output CP1H-X40DR-A
supply
High-speed counters:
Transistor output
100 kHz, 4 axes 24 16 CP1H-X40DT-D
DC power (sinking)
Pulse outputs: 100 kHz, 4 axes
(Models with transistor outputs only) supply Transistor output
CP1H-X40DT1-D
(sourcing)
Memory capacity: 20K steps AC power
CP1H-XA CPU Units Relay output CP1H-XA40DR-A
High-speed counters: supply
100 kHz, 4 axes
Transistor output
Pulse outputs: 100 kHz, 4 axes 24 16 CP1H-XA40DT-D
DC power (sinking)
(Models with transistor outputs only)
Analog inputs: 4 supply Transistor output
CP1H-XA40DT1-D
Analog outputs: 2 (sourcing)
CP1H-Y CPU Units Memory capacity: 20K steps
12 8
High-speed counters:
+ +
1 MHz, 2 axes DC power Transistor output
line-driver line-driver CP1H-Y20DT-D
100 kHz, 2 axes supply (sinking)
input, output,
Pulse outputs:1 MHz, 2 axes
2 axes 2 axes
100 kHz, 2 axes
Note: 1. CP1H PLCs are supported by CX-Programmer version 6.1 or higher.
2. Purchase a separately sold Option Unit if you will use RS-232C, RS-422A/485, Ethernet, or LCD.
■ Options for CPU Units

Name Specifications Model
RS-232C Option Board CP1W-CIF01
RS-422A/485 Option Board Can be mounted in either CPU Unit Option Board slot 1 or 2. CP1W-CIF11
RS-422A/485 (Isolated-type)
CP1W-CIF12-V1
Option Board
Ethernet Option Board Can be mounted in either CPU Unit Option Board slot 1 or 2. * CP1W-CIF41
LCD Option Board Can be mounted only in the CPU Unit Option Board slot 1. CP1W-DAM01
Memory Cassette Can be used for backing up programs or auto-booting. CP1W-ME05M
* When using CP1W-CIF41 Ver.1.0, one Ethernet port can be added.
Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
2
CP1H
■ Programming Devices
Specifications
Name Number of Model
Media
licenses
CX-One Lite is a subset of the complete
CX-One package that provides only the Support Software required
for micro PLC applications.
CX-One Lite runs on the following OS.
FA Integrated Tool
OS: Windows XP (Service Pack 3 or higher, 32-bit version) / Win-
Package CX-One Lite 1 license DVD CXONE-LT01C-V4
dows Vista (32-bit/64-bit version) / Windows 7 (32-bit/64-bit ver-
Version 4.@ sion) / Windows 8 (32-bit/64-bit version) / Windows 8.1 (32-
bit/64-bit version) / Windows 10 (32-bit/64-bit version)
CX-One Lite Ver. 4.@ includes Micro PLC Edition CX-Programmer
Ver. 9.@.
CX-One is a package that integrates the Support Software for
OMRON PLCs and components. CX-One runs on the following OS.
FA Integrated Tool OS: Windows XP (Service Pack 3 or higher, 32-bit version) / Win-
1 license
Package CX-One dows Vista (32-bit/64-bit version) / Windows 7 (32-bit/64-bit ver- DVD CXONE-AL01D-V4
sion) / Windows 8 (32-bit/64-bit version) / Windows 8.1 (32- (See note 3.)
Ver. 4.@
bit/64-bit version) / Windows 10 (32-bit/64-bit version)
CX-One Ver. 4.@ includes CX-Programmer Ver. 9.@.
Programming Device Connects Personal Computers, D-Sub 9-pin (Length: 2.0 m) XW2Z-200S-CV
Connecting Cable for For anti-static connectors
Connects Personal Computers, D-Sub 9-pin (Length: 5.0 m) XW2Z-500S-CV
CP1W-CIF01 RS-232C
Option Board Connects Personal Computers, D-Sub 9-pin (Length: 2.0 m) XW2Z-200S-V
(See note 4.) Connects Personal Computers, D-Sub 9-pin (Length: 5.0 m) XW2Z-500S-V
Note: 1. CP1H PLCs are supported by CX-Programmer version 6.1 or higher.
Update The CX-Programmer version automatically from the website using CX-Programmer version 7.0 (included with CX-One version 2.0).
2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.
3. Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.
4. Cannot be used with a peripheral USB port.
To connect to a Personal Computers via a peripheral USB port, use commercially-available USB cable (A or B type, male).
The following tables lists the Support Software that can be installed from CX-One
CX-One Lite CX-One CX-One Lite CX-One
Support Software in CX-One Support Software in CX-One
Ver.4.@ Ver.4.@ Ver.4.@ Ver.4.@
Micro PLC Edition CX-Programmer Ver.9.@ Yes No CX-Drive Ver.1.@ Yes Yes
CX-Programmer Ver.9.@ No Yes CX-Process Tool Ver.5.@ No Yes
CX-Integrator Ver.2.@ Yes Yes Faceplate Auto-Builder for NS Ver.3.@ No Yes
Switch Box Utility Ver.1.@ Yes Yes CX-Designer Ver.3.@ Yes Yes
CX-Protocol Ver.1.@ No Yes NV-Designer Ver.1.@ Yes Yes
CX-Simulator Ver.1.@ Yes Yes CX-Thermo Ver.4.@ Yes Yes
CX-Position Ver.2.@ No Yes CX-ConfiguratorFDT Ver.1.@ Yes Yes
CX-Motion-NCF Ver.1.@ No Yes CX-FLnet Ver.1.@ No Yes
CX-Motion-MCH Ver.2.@ No Yes Network Configurator Ver.3.@ Yes Yes
CX-Motion Ver.2.@ No Yes CX-Server Ver.4.@ Yes Yes
Note: For details, refer to the CX-One Catalog (Cat. No: R134).
3
CP1H
■ Expansion Units
Product name Inputs Outputs Output type Model
Input Unit 8 -- 24 VDC Input CP1W-8ED
Output Units Relay CP1W-8ER
-- 8 Transistor (sinking) CP1W-8ET
Transistor (sourcing) CP1W-8ET1

Relay CP1W-16ER
Relay CP1W-32ER
I/O Units Relay CP1W-20EDR1
12 8 Transistor (sinking) CP1W-20EDT
Transistor (sourcing) CP1W-20EDT1

Relay CP1W-40EDR
Transistor (sinking) CP1W-40EDT
24 16
Transistor (sourcing) CP1W-40EDT1
Analog Input Unit Resolution:
Input range: CP1W-AD041
1/6000
4CH -- 0 to 5 V, 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4
to 20 mA. Resolution:
CP1W-AD042
1/12000
Resolution:
Analog Output Unit -- 2CH CP1W-DA021
1/6000
Output range:
Resolution:
1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to CP1W-DA041
1/6000
-- 4CH 20 mA.
Resolution:
CP1W-DA042
1/12000
Input range: Resolution:
Analog I/O Unit 4CH 4CH CP1W-MAD44
0 to 5 V, 1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 1/12000
to 20 mA. Resolution:
4CH 2CH CP1W-MAD42
Output range: 1/12000
1 to 5 V, 0 to 10 V, ±10 V, 0 to 20 mA, or 4 to Resolution:
2CH 1CH 20 mA. CP1W-MAD11
1/6000
2CH -- Sensor type: Thermocouple (J or K) CP1W-TS001
Temperature Sensor Unit Sensor type: Thermocouple (J or K) CP1W-TS002
4CH --
Sensor type: Platinum resistance thermometer
2CH -- CP1W-TS101
(Pt100 or JPt100)
Sensor type: Platinum resistance thermometer
4CH -- CP1W-TS102
(Pt100 or JPt100)
Sensor type: Thermocouple (J or K)
Resolution:
4CH -- 2 channels can be used as analog input. CP1W-TS003
1/12000
Input range: 1 to 5 V, 0 to 10 V, 4-20 mA
12CH -- Sensor type: Thermocouple (J or K) CP1W-TS004
CompoBus/S
I/O Link Unit
8 8 CompoBus/S slave CP1W-SRT21
■ I/O Connecting Cable

I/O Connecting Cable 80 cm (for CP1W Expansion Units) CP1W-CN811
Note: An I/O Connecting Cable (approx. 6 cm) for horizontal connection is provided with CP1W Expansion Units.
■ Optional Products, Maintenance Products and DIN Track Accessories

For CP1H CPU Units
Battery Set CJ1W-BAT01
(Use batteries within two years of manufacture.)
Length: 0.5 m; Height: 7.3 mm PFP-50N
DIN Track Length: 1 m; Height: 7.3 mm PFP-100N
Length: 1 m; Height: 16 mm PFP-100N2
There are 2 stoppers provided with a CJ Unit Adapter as standard accessories to
End Plate PFP-M
secure the Units on the DIN Track.
4
CP1H
■ CJ-series Special I/O Units and CPU Bus Units

Category Name Specifications Model
CP1H CPU Adapter for connecting CJ-series Special I/O Units and CPU Bus Units
CJ Unit Adapter CP1W-EXT01
Unit options (includes CJ-series End Cover and 2 End Plates)
4 inputs (1 to 5 V (1/10,000), 0 to 10 V (1/20,000), -5 to 5 V (1/20,000),
-10 to 10 V (1/40,000), and 4 to 20 mA (1/10,000)) CJ1W-AD042
Conversion Period: 20 µs/1 point, 25 µs/2 points, 30 µs/3 points, 35 µs/4 points
8 inputs (1 to 5 V, 0 to 5 V, 0 to 10 V, –10 to 10 V, 4 to 20 mA)
Analog Input Units Resolution: 1/8,000, Conversion speed: 250 μs/input max. CJ1W-AD081-V1
(Can be set to 1/4,000 resolution and 1 ms/input.)
4 inputs (1 to 5 V, 0 to 5 V, 0 to 10 V, −10 to 10 V, 4 to 20 mA)
Resolution: 1/8,000, Conversion speed: 250 μs/input max. CJ1W-AD041-V1
(Can be set to 1/4,000 resolution and 1 ms/input.)
4 outputs (1 to 5 V (1/10,000), 0 to 10 V (1/20,000), and -10 to 10 V (1/40,000)
CJ1W-DA042V
Conversion Period: 20 µs/1 point, 25 µs/2 points, 30 µs/3 points, 35 µs/4 points
8 outputs (1 to 5 V, 0 to 5 V, 0 to 10 V, −10 to 10 V)
Resolution: 1/4,000; Conversion speed: 1 ms/output max. CJ1W-DA08V
(Can be set to 1/8000, 250 µs/output.)
8 outputs (4 to 20 mA)
Analog Output Units
Resolution: 1/4,000; Conversion speed: 1 ms/output max. CJ1W-DA08C
(Can be set to 1/8,000, 250 µs/ output.)
4 outputs (1 to 5 V, 0 to 5 V, 0 to 10 V, −10 to 10 V, 4 to 20 mA)
CJ1W-DA041
Resolution: 1/4,000, Conversion speed: 1ms/point max.
2 outputs (1 to 5 V, 0 to 5 V, 0 to 10 V, −10 to 10 V, 4 to 20 mA)
CJ1W-DA021
Resolution: 1/4,000, Conversion speed: 1ms/point max.
4 inputs, 2 outputs (1 to 5 V, 0 to 5 V, 0 to 10 V, −10 to 10 V, 4 to 20 mA)
Analog I/O Unit Resolution: 1/4000; Conversion speed: 1 ms/point max. CJ1W-MAD42
(Can be set to 1/8,000, 500 µs/point.)
4 fully universal inputs: Pt100 (3-wire), JPt100 (3-wire), Pt1000 (3-wire), Pt100 (4 wire), K, J,
T, E, L, U, N, R, S, B, WRe5-26, PLII, 4 to 20 mA,
0 to 20 mA, 1 to 5 V, 0 to 1.25 V, 0 to 5 V, 0 to 10 V, ±100-mV selectable range,
−1.25 to 1.25 V, −5 to 5 V, −10 to 10 V, ±10-V selectable range CJ1W-PH41U *
Potentiometer resolution/conversion speed: 1/256,000 (conversion cycle:
60 ms/4 points), 1/64,000 (conversion cycle: 10 ms/4 points), 1/16,000 (conversion cycle: 5
ms/4 points)
4 fully universal inputs: Pt100, JPt100, Pt1000, K, J, T, L, R, S, B,
Process Input Units 4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to 5 V, 0 to 10 V CJ1W-AD04U
Conversion speed: 250 ms/4 points
4 inputs, B, J, K, L, R, S, T; Conversion speed: 250 ms/4 inputs CJ1W-PTS51
CJ1 Special
I/O Units 4 inputs, Pt100 Ω (JIS, IEC), JPt100 Ω, Conversion speed: 250 ms/4 inputs CJ1W-PTS52
2 inputs, B, E, J, K, L, N, R, S, T, U, W, Re5-26, PL ±100 mV,
CJ1W-PTS15
Resolution: 1/64,000; Conversion speed: 10 ms/2 inputs
2 inputs, 0 to 1.25 V, −1.25 to 1.25 V, 0 to 5 V, 1 to 5 V, −5 to 5 V, 0 to 10 V,
CJ1W-PDC15
−10 to 10 V, ±10-V selectable range, 0 to 20 mA, 4 to 20 mA
4 loops, thermocouple input, NPN output CJ1W-TC001
4 loops, thermocouple input, PNP output CJ1W-TC002
2 loops, thermocouple input, NPN output, heater burnout detection function CJ1W-TC003
2 loops, thermocouple input, PNP output, heater burnout detection function CJ1W-TC004
Temperature Control 4 loops, platinum resistance thermometer input, NPN output CJ1W-TC101
Units
4 loops, platinum resistance thermometer input, PNP output CJ1W-TC102
2 loops, platinum resistance thermometer input, NPN output, heater burnout detection
CJ1W-TC103
function
2 loops, platinum resistance thermometer input, PNP output, heater burnout detection
CJ1W-TC104
function
High-speed Counter
2 inputs, max. input frequency: 500 kpps CJ1W-CT021
Unit
Pulse train, open collector output, 1 axis CJ1W-NC113
Pulse train, open collector output, 2 axes CJ1W-NC213
Pulse train, open collector output, 4 axes CJ1W-NC413
Position Control Units
Pulse train, line driver output, 1 axis CJ1W-NC133
Pulse train, line driver output, 2 axes CJ1W-NC233
Pulse train, line driver output, 4 axes CJ1W-NC433
Space Unit --- CJ1W-SP001
For V680 Series, 1 R/W Head CJ1W-V680C11
For V680 Series, 2 R/W Heads CJ1W-V680C12
ID Sensor Units
For V600 Series, 1 R/W Head CJ1W-V600C11
For V600 Series, 2 R/W Heads CJ1W-V600C12
CompoNet Master Unit Word slaves: 2,048 points, Bit slaves: 512 points CJ1W-CRM21
CompoBus/S Master
CompoBus/S remote I/O, 256 points max. CJ1W-SRM21
Unit
* If a CJ1W-PH41U is used, do not use a CP1H CPU Unit with relay contact outputs or Expansion Units with relay contact outputs.
Note: Refer to the CJ1 catalog (Cat. No. P052) for information on the CJ1 Special I/O Units.
5
CP1H
Category Name Specifications Model

Controller Link Units Wired (shielded twisted-pair cable) CJ1W-CLK23
1 RS-232C port and 1 RS-422A/485 port CJ1W-SCU42
2 RS-232C ports CJ1W-SCU22
Serial Communications 2 RS-422A/485 ports CJ1W-SCU32

Units 1 RS-232C port and 1 RS-422A/485 port CJ1W-SCU41-V1
2 RS-232C ports CJ1W-SCU21-V1
2 RS-422A/485 ports CJ1W-SCU31-V1
Shielded twisted-pair cable (STP), category 5 or 5e or higher
CJ1 CPU EtherNet/IP Unit CJ1W-EIP21
Tag data links and message communications supported
Bus Units
Ethernet Unit 100Base-TX CJ1W-ETN21
DeviceNetTM Unit Functions as master and/or slave; allows control of 32,000 points max. per master CJ1W-DRM21
2 axes CJ1W-NC271
Control commands sent using MECHATROLINK-II
MECHATROLINK-II synchronized communications 4 axes CJ1W-NC471
Position Control Unit 16 axes max., direct operation from ladder diagram, 16 axes CJ1W-NCF71
control modes: position/ speed/torque
16 axes CJ1W-NCF71-MA
Fl-net Unit 100Base-TX CJ1W-FLN22
SPU High-speed Data Storage Unit CJ1W-SPU01-V2
Note: Refer to the CJ1 catalog (Cat. No. P052) for information on the CJ1 CPU Bus Units.
■ Industrial Switching Hubs

Specifications
Current
Product name Appearance No. of Failure Accesories Model
Functions consumption (A)
ports detection
• Power supply
connector
3 No 0.22 W4S1-03B
Quality of Service (QoS):
EtherNet/IPTM control data priority
Industrial Failure detection:
Switching Hubs Broadcast storm and LSI error 5 No 0.22 W4S1-05B
detection 10/100BASE-TX, Auto- • Power supply
Negotiation connector
5 Yes 0.22 W4S1-05C
• Connector for
informing error
6
CP1H
General Specifications
Type AC power supply models DC power supply models
Item Model CP1H-@@@-A CP1H-@@@-D
Power supply 100 to 240 VAC 50/60 Hz 24 VDC
20.4 to 26.4 VDC
Operating voltage range 85 264 VAC (with 4 or more Expansion Units and Expansion I/O Units: 21.6
to 26.4 VDC)
Power consumption 100 VA max. (CP1H-@@@-A)(page 28) 50 W max. (CP1H-@@@-D)(page 28)
100 to 120 VAC inputs:
20 A max. (for cold start at room temperature)
30 A max. (for cold start at room temperature)
Inrush current (See note.) 8 ms max.
20 ms max.
200 to 240 VAC inputs:
40 A max. (for cold start at room temperature), 8 ms max.
External power supply 300 mA at 24 VDC None
20 MΩ min. (at 500 VDC) between the external AC terminals No insulation between primary and secondary for DC power
Insulation resistance
and GR terminals supply
2,300 VAC at 50/60 Hz for 1 min between the external AC and No insulation between primary and secondary for DC power
Dielectric strength
GR terminals, leakage current: 5 mA max. supply
Noise immunity Conforms to IEC 61000-4-4. 2 kV (power supply line)
Conforms to JIS C60068-2-6. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z directions for
Vibration resistance
80 minutes each. Sweep time: 8 minutes × 10 sweeps = total time of 80 minutes)
Shock resistance Conforms to JIS C60068-2-27. 147 m/s2 three times each in X, Y, and Z directions
Ambient operating tempera-
0 to 55°C
ture
Ambient humidity 10% to 90% (with no condensation)
Ambient operating environ-
No corrosive gas
ment
Ambient storage temperature −20 to 75°C (Excluding battery.)
Power holding time 10 ms min. 2 ms min.
Note: The above values are for a cold start at room temperature for an AC power supply, and for a cold start for a DC power supply.
• A thermistor (with low-temperature current suppression characteristics) is used in the inrush current control circuitry for the AC power supply. The thermistor
will not be sufficiently cooled if the ambient temperature is high or if a hot start is performed when the power supply has been OFF for only a short time. In
those cases the inrush current values may be higher (as much as two times higher) than those shown above. Always allow for this when selecting fuses and
breakers for external circuits.
• A capacitor charge-type delay circuit is used in the inrush current control circuitry for the DC power supply. The capacitor will not be charged if a hot start is
performed when the power supply has been OFF for only a short time, so in those cases the inrush current values may be higher (as much as two times
higher) than those shown above.
7
CP1H
Performance Specifications
Type CP1H-XA CPU Units CP1H-X CPU Units CP1H-Y CPU Units
Item Models CP1H-XA@@@-@ CP1H-X@@@-@ CP1H-Y@@@-@
Control method Stored program method
I/O control method Cyclic scan with immediate refreshing
Program language Ladder diagram
Maximum number of function block definitions: 128 Maximum number of instances: 256
Function blocks
Languages usable in function block definitions: Ladder diagrams, structured text (ST)
Instruction length 1 to 7 steps per instruction
Instructions Approx. 500 (function codes: 3 digits)
Instruction execution time Basic instructions: 0.10 μs min. Special instructions: 0.15 μs min.
Common processing time 0.7 ms
Program capacity 20K steps
Number of tasks 288 (32 cyclic tasks and 256 interrupt tasks)
Scheduled
1 (interrupt task No. 2, fixed)
interrupt tasks
Input interrupt 8 (interrupt task No. 140 to 147, fixed) 6 (interrupt task No. 140 to 145, fixed)
tasks (Interrupt tasks can also be specified and executed for high-speed counter interrupts.)
Maximum subroutine number 256
Maximum jump number 256
Input bits 272bits (17 words) : CIO 0.00 to 16.15
Output bits 272bits (17 words) : CIO 100.00 to 116.16
Built-in Analog
CIO 200 to CIO 203 ---
I/O areas Inputs
(See note.) Built-in Analog
CIO 210 to CIO 211 ---
Outputs
Serial PLC Link
1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189)
Area
8,192 bits (512 words): W0.00 to W511.15 (W0 to W511)
Work bits
CIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143)
TR Area 16 bits: TR0 to TR15
Holding Area 8,192 bits (512 words): H0.00 to H511.15 (H0 to H511)
Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447)
AR Area
Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959)
Timers 4,096 bits: T0 to T4095
Counters 4,096 bits: C0 to C4095
DM Area 32 Kwords: D0 to D32767
Data Register Area 16 registers (16 bits): DR0 to DR15
Index Register Area 16 registers (32 bits): IR0 to IR15
Task Flag Area 32 flags (32 bits): TK0000 to TK0031
Trace Memory 4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.)
A special Memory Cassette (CP1W-ME05M) can be mounted.
Memory Cassette
Note: Can be used for program backups and auto-booting.
Supported. Accuracy (monthly deviation): −4.5 min to −0.5 min (ambient temperature: 55°C),
Clock function
−2.0 min to +2.0 min (ambient temperature: 25°C), −2.5 min to +1.5 min (ambient temperature: 0°C)
One built-in peripheral port (USB 1.1): For connecting Support Software only.
A maximum of two Serial Communications Option Boards can be mounted.
Communications functions
A maximum of two Ethernet Option Boards can be mounted. When using CP1W-CIF41 Ver.1.0, one Ethernet Option Board can be
mounted.
Flash memory: User programs, parameters (such as the PLC Setup), comment data, and the entire DM Area can be saved to flash
Memory backup memory as initial values.
Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up by a battery.
Battery service life 5 years at 25°C. (Use the replacement battery within two years of manufacture.)
20 (12 inputs, 8 outputs)
Built-in input terminals 40 (24 inputs, 16 outputs) Line-driver inputs: Two axes for phases A, B, and Z
Line-driver outputs: Two axes for CW and CCW
Number of connectable
CP Expansion I/O Units: 7 max.; CJ-series Special I/O Units or CPU Bus Units: 2 max.
Expansion (I/O) Units
Max. number of I/O points 320 (40 built in + 40 per Expansion (I/O) Unit × 7 Units) 300 (20 built in + 40 per Expansion (I/O) Unit × 7 Units)
8 inputs (Shared by the external interrupt inputs (counter mode) and 6 inputs (Shared by the external interrupt inputs (counter
Interrupt inputs
the quick-response inputs.) mode) and the quick-response inputs.)
8 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 6 inputs (Response frequency: 5 kHz max. for all interrupt
Interrupt input counter mode 16 bits inputs), 16 bits
Up or down counters Up or down counters
Quick-response inputs 8 points (Min. input pulse width: 50 μs max.) 6 points (Min. input pulse width: 50 μs max.)
Scheduled interrupts 1
8
CP1H
Type CP1H-XA CPU Units CP1H-X CPU Units CP1H-Y CPU Units
Item Models CP1H-XA@@@-@ CP1H-X@@@-@ CP1H-Y@@@-@
2 inputs: Differential phases (4x),
500 kHz or Single-phase,
4 inputs: Differential phases (4x), 50 kHz or 1 MHz and
Single-phase (pulse plus direction, up/down, increment), 2 inputs: Differential phases (4x), 50 kHz or Single-phase
High-speed counters 100 kHz (pulse plus direction, up/down, increment),
Value range: 32 bits, Linear mode or ring mode 100 kHz
Interrupts: Target value comparison or range comparison Value range: 32 bits, Linear mode or ring mode
Interrupts: Target value comparison or range
comparison
Trapezoidal or S-curve acceleration and deceleration
(Duty ratio: 50% fixed)
Trapezoidal or S-curve acceleration and deceleration
Pulse outputs Pulse out- 2 outputs, 1 Hz to 1 MHz (CCW/CW or pulse plus
(Duty ratio: 50% fixed)
(models with puts direction)
4 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction)
transistor out- 2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus
puts only) direction)
PWM out- Duty ratio: 0.0% to 100.0% (Unit: 0.1%)
puts 2 outputs, 0.1 to 6553.5 Hz (Accuracy: ±5% at 1 kHz)
4 analog inputs and 2 analog
Built-in analog I/O terminals None
outputs
Analog control 1 (Setting range: 0 to 255)
External analog input 1 input (Resolution: 1/256, Input range: 0 to 10 V), not isolated
Note: The memory areas for CJ-series Special I/O Units and CPU Bus Units are allocated at the same as for the CJ-series. For details, refer to the CJ Series catalog
(Cat. No. P052).
9
CP1H
Built-in Inputs / Built-in Outputs
■ Terminal Block Arrangement
● CP1H-XA and X CPU Units with AC Power Supply ● CP1H-XA and X CPU Units with DC Power supply
CIO 0 CIO 1 CIO 0 CIO 1
L1 L2/N COM 01 03 05 07 09 11 01 03 05 07 09 11 (Input + − COM 01 03 05 07 09 11 01 03 05 07 09 11 (Input
● 00 02 04 06 08 10 00 02 04 06 08 10 ● terminals) ● NC 00 02 04 06 08 10 00 02 04 06 08 10 ● terminals)
+ 00 01 02 03 04 06 00 01 03 04 06 ● (Output NC 00 01 02 03 04 06 00 01 03 04 06 ● (Output
● − COM COM COM COM 05 07 COM 02 COM 05 07 terminals) ● NC COM COM COM COM 05 07 COM 02 COM 05 07 terminals)
CIO 100 CIO 101 CIO 100 CIO 101
■ Built-in Input Area

● CP1H-XA and X CPU Units
Pulse output origin search function set to
Input operation High-speed counter operation
PLC Setup be used.
Normal inputs Interrupt inputs Quick-response inputs High-speed counters Origin search
CIO 0 00 Normal input 0 Interrupt input 0 Quick-response input 0 Pulse 0: Origin input signal
01 Normal input 1 Interrupt input 1 Quick-response input 1 High-speed counter 2 (phase-Z/reset) Pulse 0: Origin proximity input signal
02 Normal input 2 Interrupt input 2 Quick-response input 2 High-speed counter 1 (phase-Z/reset) Pulse output 1: Origin input signal
03 Normal input 3 Interrupt input 3 Quick-response input 3 High-speed counter 0 (phase-Z/reset) Pulse output 1: Origin proximity input signal
High-speed counter 2 (phase-A, increment,
04 Normal input 4
or count input)
High-speed counter 2 (phase-B,
05 Normal input 5
decrement, or direction input)
06 Normal input 6
or count input)
07 Normal input 7
08 Normal input 8
or count input)
09 Normal input 9
10 Normal input 10
or count input)
11 Normal input 11
CIO 1 00 Normal input 12 Interrupt input 4 Quick-response input 4 High-speed counter 3 (phase-Z/reset) Pulse output 2: Origin input signal
01 Normal input 13 Interrupt input 5 Quick-response input 5 Pulse output 2: Origin proximity input signal
02 Normal input 14 Interrupt input 6 Quick-response input 6 Pulse output 3: Origin input signal
03 Normal input 15 Interrupt input 7 Quick-response input 7 Pulse output 3: Origin proximity input signal
04 Normal input 16
05 Normal input 17
06 Normal input 18
07 Normal input 19
08 Normal input 20
09 Normal input 21
10 Normal input 22
11 Normal input 23
■ Built-in Output Area

● CP1H-XA and CP1H-X CPU Units
When the When the origin search function is set to
Instruc- instructions to When a pulse output instruction be used in the PLC Setup, When the PWM instruction
tions the right are not (SPED, ACC, PLS2, or ORG) is executed and an origin search is executed is executed
executed by the ORG instruction
Fixed duty ratio pulse outputs Variable duty ratio pulse output
PLC Setup Normal outputs
CW/CCW Pulse plus direction When the origin search function is used PWM output
CIO 00 Normal output 0 Pulse output 0 (CW) Pulse output 0 (pulse)
100 01 Normal output 1 Pulse output 0 (CCW) Pulse output 1 (pulse)
02 Normal output 2 Pulse output 1 (CW) Pulse output 0 (direction)
03 Normal output 3 Pulse output 1 (CCW) Pulse output 1 (direction)
04 Normal output 4 Pulse output 2 (CW) Pulse output 2 (pulse)
06 Normal output 6 Pulse output 3 (CW) Pulse output 3 (pulse)
CIO 00 Normal output 8 PWM output 0
101 01 Normal output 9 PWM output 1
02 Normal output 10 Origin search 0 (Error counter reset output)
CIO 06 Normal output 14
101 07 Normal output 15
10
CP1H
■ Terminal Block Arrangement

● CP1H-Y CPU Units
LIne-driver inputs
COUNTER CIO 0 CIO 1
+ − A0+ B0+ Z0+ A1+ B1+ Z1+ COM 01 05 11 01 03 05
● NC A0- B0- Z0- A1- B1- Z1- 00 04 10 00 02 04 ●

(Input terminals)
NC CW0+ CCW0+ CW1+ CCW1 NC NC 04 05 07 00 02 ●
● NC CW0- CCW0- CW1- CCW1- + − COM 06 COM 01 03

(Output terminals)
PULSE CIO 100 CIO 101
LIne-driver outputs (See note.)

Note: Supply 24 VDC to the bottom 24 VDC input terminals when using bits 04 to 07 of output word CIO 100.
■ Built-in Input Area
Pulse output origin search function set to
Input operation setting High-speed counter operation setting
PLC Setup be used.
Normal inputs Interrupt inputs Quick-response inputs High-speed counters Origin search
High-speed counter 0 (phase-A,
A0
increment, or count input) fixed
B0
decrement, or direction input) fixed
High-speed counter 0 (phase-Z/reset)
Z0 Pulse 0: Origin input signal (line driver)
fixed
A1
increment, or count input) fixed
B1
decrement, or direction input) fixed
High-speed counter 1 (phase-Z/reset)
Z1 Pulse 1: Origin input signal (line driver)
fixed
CIO 0 Bit 00 Normal input 0 Interrupt 0 Quick-response input 0 Pulse 2: Origin proximity input signal
Bit 01 Normal input 1 Interrupt 1 Quick-response input 1 High-speed counter 2 (phase-Z/reset)
Bit 04 Normal input 2
increment, or count input)
increment, or count input)
Bit 11 Normal input 5 Pulse 3: Origin proximity input signal
CIO 1 Bit 00 Normal input 6 Interrupt 2 Quick-response input 2 High-speed counter 2 (phase-Z/reset) Pulse 3: Origin input signal
Bit 01 Normal input 7 Interrupt 3 Quick-response input 3 Pulse 2: Origin input signal
Bit 02 Normal input 8 Interrupt 4 Quick-response input 4 Pulse 1: Origin input signal (open collector)
Bit 03 Normal input 9 Interrupt 5 Quick-response input 5 Pulse 0: Origin input signal (open collector)
These areas are for line-driver inputs, so they can be used only for high-speed counters (1 MHz) and not for other purposes, such as normal inputs.
■ Built-in Output Area
When the When the origin search function is set to
instructions to When a pulse output instruction be used in the PLC Setup, and an origin When the PWM instruction is
Instructions
the right are not (SPED, ACC, PLS2, or ORG) is executed search is executed by the ORG executed
executed instruction
Fixed duty ratio pulse output Variable duty ratio pulse output
PLC Setup Normal output
CW/CCW Pulse plus direction When the origin search function is used PWM output
Pulse output 0 (CW) Pulse output 0 (pulse)
CW0 Not supported.
fixed fixed
Pulse output 0 (CCW) Pulse output 1 (pulse)
CCW0 Not supported.
fixed fixed
Pulse output 0 (direction)
CW1 Not supported. Pulse output 1 (CW) fixed
fixed
Pulse output 1 (CCW) Pulse output 1 (direction)
CCW1 Not supported.
fixed fixed
CIO Bit 04 100.04 Pulse output 2 (CW) Pulse output 2 (pulse)
100 Bit 05 100.05 Pulse output 2 (CCW) Pulse output 2 (direction)
Bit 06 100.06 Pulse output 3 (CW) Pulse output 3 (pulse)
Bit 07 100.07 Pulse output 3 (CCW) Pulse output 3 (direction)
CIO Bit 00 101.00 Origin search 2 (Error counter reset output) PWM output 0
101 Bit 01 101.01 Origin search 3 (Error counter reset output) PWM output 1
Bit 02 101.02 Origin search 0 (Error counter reset output)
Bit 03 101.03 Origin search 1 (Error counter reset output)
These areas are for line-driver inputs, so they can be used only for high-speed counters (1 MHz) and not for other purposes, such as normal inputs.
11
CP1H
I/O Specifications for CPU Units
■ Input Specifications
Specifications
ITEM High-speed counter inputs Interrupt inputs and
Normal inputs
(phases A and B) quick-response inputs
CP1H-XA/X CPU CIO 0.00 to CIO 0.03 and
CIO 0.04 to CIO 0.11 CIO 1.04 to CIO 1.11
Units CIO 1.00 to CIO 1.03
CIO 0.00, CIO 0.01 and
CP1H-Y CPU Units CIO 0.04, CIO 0.05, CIO 0.10, CIO 0.11 CIO 1.04, CIO 1.05
CIO 1.00 to CIO 1.03
Input voltage 24 VDC +10%/–15%
Applicable sensors 2-wire sensors or 3-wire sensors
Input impedance 3.0 kΩ 4.7 kΩ
Input current 7.5 mA typical 5 mA typical
ON voltage 17.0 VDC min. 14.4 VDC min.
OFF voltage/current 1 mA max. at 5.0 VDC
ON delay 2.5 μs max. 50 μs max. 1 ms max.
OFF delay 2.5 μs max. 50 μs max. 1 ms max.
IN IN IN
Input LED Input LED Input LED
1000 pF 1000 pF
4.3 kΩ
910 Ω
750 Ω
3.0 kΩ Internal 3.0 kΩ Internal 4.7 kΩ Internal
Circuit configuration IN
circuits
IN
circuits
IN
circuits
COM COM COM
● High-speed Counter Function Input Specifications

CP1H-XA/X CPU Units (Input bits: CIO 0.04 to CIO 0.11)
CP1H-Y CPU Units (Input bits: CIO 0.04, CIO 0.05, CIO 0.10, CIO 0.11)
Item Specifications
• Pulse plus direction input mode • Differential phase input mode
• Increment mode 20.0 μs min.
• Up/down input mode

ON 90%
Phase A 50%
10.0 μs min. 10%
ON/OFF delay OFF
ON 90% ON 90%
50% Phase A 50%
OFF 10% OFF 10%
T1 T2 T3 T4
2.5 μs min. 2.5 μs min. T1,T2,T3,T4 : 2.5 μs min
● Interrupt Input Counter Mode

CP1H-XA/X CPU Units (Input bits: CIO 0.00 to CIO 0.03, CIO 1.00 to CIO 1.03)
CP1H-Y CPU Units (Input bits: CIO 0.00, CIO 0.11, CIO 1.00 to CIO 1.03)
Item Specifications
ON
90%
ON/OFF delay OFF

10%
50 μs min. 50 μs min.
● High-speed Counter Inputs (Line-driver Inputs)

CP1H-Y CPU Units
Item Specifications
High-speed counter in-
Phases A and B Phase Z
puts
RS-422A line-driver, AM26LS31 or equivalent
Input voltage
Note: The power supply voltage on the line-driver must be 5 V±5% max.
Input type Line-driver input
Input current 10 mA typical 13 mA typical
330 Ω 180 Ω
+ +
6800 pF
680 Ω 330 pF 560 Ω
Circuit configuration Internal
Internal circuits
− circuits −
330 Ω 180 Ω
• Pulse plus direction input mode • Differential phase input mode

• Increment mode
• Up/down input mode
2 μs min.
1 μs min.
ON
ON/OFF delay 0.5 μs min. 0.5 μs min. Phase A 90 μs min.
OFF
ON ON
ON
Phase B Phase Z
OFF OFF OFF
T1 T2 T3 T4
T1,T2,T3,T4 : 0.5 μs min.
12
CP1H
■ Output Specifications
● CPU Units with Relay Outputs
Item Specifications Note: Under the worst conditions, the service life of output contacts is as shown
on the left.
Max. switching capacity 2 A, 250 VAC (cosφ = 1), 2 A, 24 VDC 4 A/common) The service life of relays is as shown in the following diagram as a guide-
Min. switching capacity 5 VDC, 10 mA line.
500
Resis- 125 VAC resistive load
Common terminal current (A)

300
100,000 operations (24 VDC) 4
Ser- Elec- tive load 200
30 VDC/250 VAC resistive load
vice trical 3
Induc- 100
life of 48,000 operations (250 VAC, cosφ = 0.4) 30 VDC τ = 7 ms
tive load 50
relay
Life (x 104 )
30
Mechanical 20,000,000 operations
20
ON delay 15 ms max. 10 0 47 55
OFF delay 15 ms max. Ambient temperature (˚C)
5 125 VAC cos φ = 0.4
3 250 VAC cos φ = 0.4
2
Output LED OUT
L
0.1 0.2 0.3 0.5 0.7 1 2 3 5 10
Contact current (A)
L
Circuit configuration OUT
Internal circuits
COM Maximum
250 VAC: 2 A,
24 VDC: 2 A
● CPU Units with Transistor Outputs (Sinking/Sourcing)

Item Specifications
CP1H-XA/X CPU Units CIO 100.00 to CIO 100.07 CIO 101.00, CIO 101.01 CIO 101.02 to CIO 101.07
CP1H-Y CPU Units CIO 100.04 to CIO 100.07 CIO 101.00, CIO 101.01 CIO 101.02, CIO 101.03
Max. switching capacity 4.5 to 30 VDC: 300 mA/point, 0.9 A/common, 3.6 A/Unit *1*2
Min. switching capacity 4.5 to 30 VDC, 1 mA
Leakage current 0.1 mA max.
Residual voltage 0.6 V max. 1.5 V max.
ON delay 0.1 ms max.
OFF delay 0.1 ms max. 1 ms max.
Fuse 1/common *3
Sinking Outputs Sinking Outputs
OUT OUT
L L
OUT OUT
L Internal L
Internal Internal circuits
4.5 to 30 VDC 4.5 to 30 VDC
circuits circuits
COM (−) COM (−)
Circuit configuration Sourcing Outputs Sourcing Outputs
COM (+)
COM (+)
Internal Internal 4.5 to 30 VDC Internal
circuits circuits circuits 4.5 to 30 VDC
OUT
L OUT
OUT L
L OUT
L
Note: 1. Do not apply a voltage or connect a load to an output terminal exceeding the maximum switching capacity.
*1 Also do not exceed 0.9 A for the total for CIO 100.00 to CIO 100.03. (CIO 100.00 to CIO 100.03 is different common.) 0.9
*2 A maximum of 0.9 A per common can be switched at an ambient temperature of 50 °C. Common
*3 Fuses cannot be replaced by the user. terminal 0.6
current
(A)
0 50 55
Ambient temperature (˚C)
13
CP1H
● Pulse outputs ● Pulse outputs

CP1H-XA/X CPU Units: Output bits CIO 100.00 to CIO 100.07 CP1H-XA/X/Y CPU Units: Output bits CIO101.00, CIO 101.01
CP1H-Y CPU Units: Output bits CIO100.04 to CIO 100.07
Item Specifications
Item Specifications
Max. switching capacity 30 mA at 4.75 to 26.4 VDC
Max. switching capacity 30 mA at 4.75 to 26.4 VDC
Max. output frequency 1 kHz
Min. switching capacity 7 mA at 4.75 to 26.4 VDC
PWM output precision ON duty +5%, −0% at output frequency of 1 kHz
Max. output frequency 100 kHz
OFF
OFF 90%
ON
ton
Output waveform Output waveform
ON 10% T
ton
4 ms min. 2 ms min. ON duty = × 100%
T
Note: 1. The above values assume a resistive load and do not consider the im-
pedance of the cable connecting the load. Note: 1. The above values assume a resistive load and do not consider the im-
2. The pulse widths during actual use may be smaller than the ones shown pedance of the cable connecting the load.
above due to pulse distortion caused by connecting cable impedance. 2. The pulse widths during actual use may be smaller than the ones shown
3. The OFF and ON refer to the output transistor. The output transistor is ON above due to pulse distortion caused by connecting cable impedance.
at level “L”. 3. The OFF and ON refer to the output transistor. The output transistor is ON
at level “L”.
● Pulse Outputs (Line-driver Outputs)
CP1H-Y CPU Units
Item Specifications
Pulse outputs Line-driver outputs, Am26LS31 or equivalent
Max. output current 20 mA
Max. output frequency 1 MHz
Internal circuits
CWn+
Circuit configuration CWn−
CCWn+
CCWn−
Note: Connect a load of 20 mA or less to the output. The Unit may be damaged
if a current of more than 20 mA is output.
■ Analog I/O Specifications (CP1H-XA CPU Units Only)

Item Voltage I/O Current I/O
Number of analog inputs 4
Input signal range 0 to 5 V, 1 to 5 V, 0 to 10 V, or −10 to 10 V 0 to 20 mA or 4 to 20 mA
Max. rated input ±15 V ±30 mA
External input impedance 1 MΩ min. Approx. 250 Ω
Analog
Resolution 1/6,000 or 1/12,000 (full scale)
Input
Section Overall accuracy 25°C: ±0.3% full scale/0 to 55°C: ±0.6% full scale 25°C: ±0.4% full scale/0 to 55°C: ±0.8% full scale
Full scale for −10 to 10 V: F448 (E890) to 0BB8 (1770) hex
A/D conversion data
Full scale for other ranges: 0000 to 1770 (2EE0) hex
Averaging Supported (Set for individual inputs in the PLC Setup.)
Open-circuit detection Supported (Value when disconnected: 8000 Hex)
Number of outputs 2
Output signal range 0 to 5 V, 1 to 5 V, 0 to 10 V, −10 to 10 V 0 to 20 mA or 4 to 20 mA
Allowable external output
1 kΩ min. 600 Ω max.
Analog load resistance
Output External output impedance 0.5 Ω max. ---
Section Resolution 1/6000 or 1/12000 (full scale)
Overall accuracy 25°C±0.4% of full scale, 0 to 55°C±0.8% of full scale
Full scale for −10 to 10 V: F448 (E890) to 0BB8 (1770) hex
D/A conversion data
Full scale for other ranges: 0000 to 1770 (2EE0) hex
Conversion time 1 ms/point
Isolation method Photocoupler isolation between analog I/O terminals and internal circuits. No isolation between analog I/O signals.
Built-in Analog Input Switch (Factory Settings) Built-in Analog I/O Terminal Block Arrangement
AD1 AD2 AD3 AD4 AD1+ AD1-- AD2+ AD2-- AD3+ AD3-- AD4+ AD4--
ON
Current input
OFF Voltage input VOUT1 IOUT1 COM1 VOUT2 IOUT2 COM2 AG AG
14
CP1H
External Interfaces
■ CPU Unit Nomenclature
Front Option Board Slot 1
Back
Input Indicators Terminal Block (Removable) Option Board Slot 2
Battery Cover
Operation Indicators IN
AC100-240V
Peripheral USB Port L1 L2/N COM
00
01
02
03
04
05
06
07
08
09
10
11
00
01
02
03
04
05
06
07
08
09
10
11
POWER
Seven-segment ERR/ALM
BKUP
EXP
LED Display
Analog Control
External Analog
Settings Input 00 01 02 03 04 06 00 01 03 04 06
COM COM COM COM 05 07 COM 02 COM 05 07
Connector DC24V0.3A 100CH 101CH
1CH
OUTPUT
OUT
DIP Switch
Built-in Analog I/O
Terminal Block (See note.)
Built-in Analog Memory Cassette Slot Terminal Block Expansion Unit and CJ Unit Adapter Connector
Input Switch (See note.) (Removable) Expansion I/O Unit
Connector
Note: XA CPU Units only.
Output Indicators
15
CP1H
Option Unit Specifications
■ Serial Communications Specifications (CP1W-CIF01/-CIF11)
Item Function Interface
Peripheral USB port For connecting Peripheral Device. Conforms to USB 1.1, B-type connector
The following can be used for either port.
CP1W-CIF01 RS-232C Option Board

Serial port 1 COMM
(Option board slot 1)
Host Link, No-protocol, NT Link (1: N),

Serial PLC Link (See note.), CP1W-CIF11
Serial Gateway (CompoWay/F master, Modbus-RTU master), RS-422A/485 Option Board
Modbus-RTU easy master function, (Maximum transmission distance 50m)
ToolBus COMM
CP1W-CIF12-V1
Serial port 2 RS-422A/485(Isolated-type) Option Board
(Option board slot 2) (Maximum transmission distance 500m)
Can be used with either port.
Note: Serial PLC Link can be used with either serial port 1 or serial port 2.
■ Ethernet Communications Specifications (CP1W-CIF41)

Item Specifications
Applicable PLCs CP1H CPU Units
2 sets. (The CP1W-CIF41 Ver.1.0 and Ver.2.0 can be combined and used with one CPU Unit. When using CP1W-
Number of Units that can be mounted
CIF41 Ver.1.0, only one unit can be mounted in an option board slot.)
Media access method CSMA/CD
Modulation method Baseband
Transmission paths Star form
Baud rate 100 Mbit/s (100Base-TX), 10 Mbit/s (10Base-T)
• Unshielded twisted-pair (UDP) cable
Categories: 5, 5e
Transfer 100 Mbit/s
• Shielded twisted-pair (STP) cable
Categories: 100 Ω at 5, 5e
Transmission media
• Unshielded twisted-pair (UDP) cable
Categories: 3, 4, 5, 5e
10 Mbit/s
• Shielded twisted-pair (STP) cable
Categories: 100 Ω at 3, 4, 5, 5e
Transmission Distance 100 m (distance between hub and node)
Item FINS Communications Service Specifications

Number of nodes 254
Message length 1016 bytes max.
Size of buffer 8k
Communications Function FINS Communications Service (UDP/IP, TCP/IP)
Protocol used UDP/IP
FINS/UDP Server/Client Only server (Cannot be used as a client)
method Port number 9600 (default) Can be changed.
Protection No
Protocol used TCP/IP
Server/Client Only server (Cannot be used as a client)
FINS/TCP
Number of connections Up to 2 simultaneous connections and only one connection can be set to client
method
Port number 9600 (default) Can be changed.
Protection Yes (Specification of client IP addresses when unit is used as a server)
Note: 1. CX-Programmer version 8.1 or higher (CX-One version 3.1 or higher) is required.
2. Use CX-Integrator version 2.33 or higher (CX-One version 3.1 or higher) when the system needs to be set the routing tables. However, CX-Integrator does
not support the other functions, using CP1W-CIF41, such as transferring the parameters and network structure.
3. To connect the CP1H CPUs with the NS-series Programmable Terminals via Ethernet using CP1W-CIF41, make sure that the system version of NS Series
is 8.2 or higher.
16
CP1H
■ LDC Option Board (CP1W-DAM01)

● Specifications
Item Function
Mounting port CP1H: Option board slot 1
Communications protocol Peripheral bus (Turn ON DIP switch pin 4.)
Number of display characters 4 rows × 12 characters: 48 characters max.
Display characters 5 × 7 dots (alphanumeric and symbols).
Backlight Electroluminescence (EL): Normal: Lit green; Error: Flashing red
● LCD Functions
Operation Description
Changing operating modes Change the PLC operating mode without using the CX-Programmer.
I/O memory Read and change the present values in the memory areas and force-set or force-reset bits.
PLC Setup operations Read and change the PLC Setup.
Analog I/O monitor Monitor the analog adjustment and present value for the external analog setting input.
Error log display Read the log of errors that have occurred.
Memory cassette operation Transfer and verify user programs between the PLC and memory cassette.
User monitor settings Read the status of up to 16 words and bits with comments. You can use this setting to read data on the startup display.
Message display function Display a user-set message of up to 48 characters on the LCD Option Board when a specified bit turns ON.
settings A maximum of 16 screens can be registered for display.
Operation:
Use this timer for ON/OFF switching at a Starting day of the week Ending day of the week
Example: Monday Example: Friday
specified times every day from the starting
Day timer day of the week to the ending day of the ON
week. Sixteen timers cam be set from OFF
timer 01 to timer 16.
Starting time Ending time Starting time Ending time Starting time Ending time
Example: 9:00 Example: 17:00 9:00 17:00 9:00 17:00
Operation:
Starting day of the week Ending day of the week
Use this timer for ON/OFF operation in Example: Monday Example: Friday
Timers
intervals of one week that starts one day
Weekly timer ON
and ends another day. Sixteen timers cam
OFF
be set from timer No. 01 to timer No. 16.
Starting time Ending time Starting time Ending time
Example: 12:00 Example: 8:00 12:00 8:00
Operation:
Use the calendar timers for ON or OFF ON
operation in intervals of one year from the
Calendar timer OFF
starting day to the ending day. Sixteen
timers can be set from timer 01 to timer 16. Starting day Ending day Set September 1
July 1 August 31 as the ending day.
Save the various settings that you set with the LCD Option Board to the DM Area of the PLC. You can also write the settings
Saving setting
saved in the PLC to the LCD Option Board.
Language Changing the display language (Japanese/English)
• Setting the time of the PLC's built-in clock
• Reading system data (e.g., unit version and lot number)
• Setting the backlight lighting time
Other functions
• Adjusting LCD contrast
• Reading cycle time (e.g., average, maximum, and minimum)
• Clearing data for the LCD Option Board
17
CP1H
Expansion I/O Unit Specifications
■ CP1W-40EDR/40EDT/40EDT1/32ER/32ET/32ET1/20EDR1/20EDT/20EDT1/16ER/16ET/16ET1/8ED/8ER/8ET/8ET1 Expansion I/O Units
Expansion I/O Units can be connected to the CPU Unit to configure the required number of I/O points.
● DC Inputs (CP1W-40EDR/40EDT/40EDT1/20EDR1/20EDT/20EDT1/8ED)
Item Specifications
Input voltage 24 VDC +10%/−15%
Input impedance 4.7 kΩ
Input current 5 mA typical
ON voltage 14.4 VDC min.
OFF voltage 5.0 VDC max.
ON delay 0 to 32 ms max. (Default: 8 ms) (See note 1.)
OFF delay 0 to 32 ms max. (Default: 8 ms) (See note 1.)
IN
Input LED
750 Ω
4.7 kΩ Internal
Circuit configuration IN
circuits
COM
Note: 1. Do not apply a voltage exceeding the rated voltage to an input terminal.
2. Can be set in the PLC Setup to 0, 0.5, 1, 2, 4, 8, 16 or 32 ms. The CP1W-
40EDR/EDT/EDT1 are fixed at 16 ms.
● Relay Outputs (CP1W-40EDR/32ER/20EDR1/16ER/8ER)

Item Specifications Note: Under the worst conditions, the service life of output contacts is as shown on
Max. switching capacity 2 A, 250 VAC (cosφ = 1), 24 VDC 4 A/common the left. The service life of relays is as shown in the following diagram as a
guideline.
Min. switching capacity 5 VDC, 10 mA
Resistive 500
120 VAC resistive load Relationship between
150,000 operations (24 VDC)
Life (x104)
300
Service Elec- load 24 VDC τ = 7 mA Output Load Current and
200 120 VAC cos φ = 0.4
life of trical Inductive 240 VAC cos φ = 0.4 Ambient Temperature
100,000 operations (24 VAC cos = 0.4) 100 24 VDC/240- VAC
relay load resistive load
(CP1W-16ER/32ER)
50
Mechanical 20,000,000 operations
Output load current (%)

30 100
ON delay 15 ms max. 20
OFF delay 15 ms max. 10
5 50
Output LED OUT
L 3
2
L
Circuit configuration OUT
0 43 55
Internal 0.1 0.2 0.3 0.5 0.7 1 2 3 5 10 Ambient temperature (˚C)
circuits Contact current (A)
COM Maximum
250 VAC: 2 A, Switching frequency: 1,800 operations/h When using the CP1W-32ER, do not
24 VDC: 2 A
allow more than 24 outputs to be ON
simultaneously regardless of the
ambient temperature.
18
CP1H
● Transistor Outputs (Sinking/Sourcing)

(CP1W-40EDT/-40EDT1/-32ET/-32ET1/-20EDT/-20EDT1/-16ET/-16ET1/-8ET/-8ET1)
Specifications
Item CP1W-40EDT CP1W-32E CP1W-20EDT CP1W-16ET CP1W-8ET
CP1W-40EDT1 CP1W-32ET1 CP1W-20EDT1 CP1W-16ET1 CP1W-8ET1
• OUT00/01
4.5 to 30 VDC,
24 VAC +10%/ 4.5 to 30 VDC: 0.2 A/output
Max. switching ca- 4.5 to 30 VDC: 0.3 A/point −5%: 0.3 A/point 0.3 A/point • OUT02 to 07
pacity (See note 4.5 to 30 VDC,
3.) 0.3A/output
0.9 A/common 0.9 A/common 0.9 A/common 0.9 A/common
3.6 A/common 1.8 A/common 3.6 A/common 1.8 A/common
Leakage current 0. 1mA max.
Residual voltage 1.5 V max. Note: 1. Do not apply a voltage or connect a
ON delay 0.1ms max. load to an output terminal exceeding
1 ms max. at 24 VDC the maximum switching capacity.
OFF delay
+10%/−5%, 5 to 300 mA 2. The fuses cannot be replaced by the
Max number of user.
Simultaneously 3. A maximum of 0.9 A per common can
16 pts (100%) 24 pts (75%) 8 pts (100%) 16 pts (100%) 8 pts (100%) be switched at an ambient tempera-
ON Points of
Output ture of 50°C.
Fuse (See note 2.) 1/common
Sinking Outputs Sourcing Outputs 0.9
0.8
Output LED Output LED

Common
OUT
L
terminal
COM (+) current
Circuit configura- (A)
L Internal
tion Internal OUT
24 VDC/ circuits 24 VDC/
circuits 4.5 to OUT 4.5 to
30 VDC L 30 VDC
COM (−) L 0 50 55
OUT Ambient temperature (°C)
19
CP1H
■ CP1W-AD041/AD042/DA021/DA041/DA042/MAD11/MAD42/MAD44 Analog Units

Analog values that are input are converted to binary data and stored in the input area, or binary data is output as analog values.
● Analog Input Units

Model CP1W-AD041 CP1W-AD042
Item Voltage Input Current Input Voltage Input Current Input
Number of inputs 4 inputs (4 words allocated)
0 to 5 VDC, 1 to 5 VDC, 0 to 5 VDC, 1 to 5 VDC,
Input signal range 0 to 10 VDC, or –10 to 10 0 to 20 mA or 4 to 20 mA 0 to 10 VDC, or -10 to 10 0 to 20 mA or 4 to 20 mA
VDC VDC
Max. rated input ±15 V ±30 mA ±15 V ±30 mA
External input impedance 1 MΩ min. Approx. 250 Ω 1 MΩ min. Approx. 250 Ω
Resolution 1/6000 (full scale) 1/12000 (full scale)
25°C 0.3% full scale 0.4% full scale 0.2% full scale 0.3% full scale
Overall accuracy
0 to 55°C 0.6% full scale 0.8% full scale 0.5% full scale 0.7% full scale
16-bit binary (4-digit hexadecimal) 16-bit binary (4-digit hexadecimal)
A/D conversion data Full scale for –10 to 10 V: F448 to 0BB8 Hex Full scale for –10 to 10 V: E890 to 1770 Hex
Full scale for other ranges: 0000 to 1770 Hex Full scale for other ranges: 0000 to 2EE0 Hex
Averaging function Supported (Set in output words n+1 and n+2.)
Open-circuit detection function Supported
Conversion time 2 ms/point (8 ms/all points) 1 ms/point (4 ms/all points)
Current consumption 5 VDC: 100 mA max.; 24 VDC: 90 mA max. 5 VDC: 100 mA max.; 24 VDC: 50 mA max.
● Analog Output Units

Model CP1W-DA021/CP1W-DA041 CP1W-DA042
Item Voltage Output Current Output Voltage Output Current Output
CP1W-DA021: 2 outputs (2 words allocated)
Number of outputs 4 outputs (4 words allocated)
CP1W-DA041: 4 outputs (4 words allocated)
1 to 5 VDC, 0 to 10 VDC, or 1 to 5 VDC, 0 to 10 VDC, or
Output signal range 0 to 20 mA or 4 to 20 mA 0 to 20 mA or 4 to 20 mA
–10 to 10 VDC –10 to 10 VDC
External output allowable
2 kΩ min. 350 Ω max. 2 kΩ min. 350 Ω max.
load resistance
Analog
output External output impedance 0.5 Ω max. --- 0.5 Ω max. ---
section Resolution 1/6000 (full scale) 1/12000 (full scale)
Overall 25°C 0.4% full scale 0.3% full scale

accuracy 0 to 55°C 0.8% full scale 0.7% full scale
D/A conversion data Full scale for –10 to 10 V: F448 to 0BB8 Hex Full scale for –10 to 10 V: E890 to 1770 Hex
Full scale for other ranges: 0000 to 1770 Hex Full scale for other ranges: 0000 to 2EE0 Hex
CP1W-DA021: 2 ms/point (4 ms/all points)
Conversion time 1 ms/point (4 ms/all points)
CP1W-DA041: 2 ms/point (8 ms/all points)
CP1W-DA021: 5 VDC: 40 mA max.; 24 VDC: 95 mA max.
Current consumption 5 VDC: 70 mA max.; 24 VDC: 160 mA max.
CP1W-DA041: 5 VDC: 80 mA max.; 24 VDC: 124 mA max.
20
CP1H
● Analog I/O Units

Model CP1W-MAD42/CP1W-MAD44 CP1W-MAD11
Item Voltage I/O Current I/O Voltage I/O Current I/O
Number of inputs 4 inputs (4 words allocated) 2 inputs (2 words allocated)
0 to 5 VDC, 1 to 5
0 to 5 VDC, 1 to 5
0 to 20 mA or 4 to 20 VDC, 0 to 20 mA or 4 to 20
Input signal range VDC, 0 to 10 VDC, or
mA 0 to 10 VDC, or −10 mA
–10 to 10 VDC
to 10 VDC
Max. rated input ±15 V ±30 mA ±15 V ±30 mA
External input impedance 1 MΩ min. Approx. 250 Ω 1 MΩ min. Approx. 250 Ω
Analog Input Resolution 1/12000 (full scale) 1/6000 (full scale)

Section 25°C 0.2% full scale 0.3% full scale 0.3% full scale 0.4% full scale
Overall accuracy
0 to 55°C 0.5% full scale 0.7% full scale 0.6% full scale 0.8% full scale
A/D conversion data Full scale for –10 to 10 V: E890 to 1770 hex Full scale for −10 to 10 V: F448 to 0BB8 hex
Full scale for other ranges: 0000 to 2EE0 hex Full scale for other ranges: 0000 to 1770 hex
Supported (Settable for individual inputs via
Averaging function Supported
DIP switch)
CP1W-MAD42: 2 outputs (2 words allocated)
Number of outputs 1 output (1 word allocated)
CP1W-MAD44: 4 outputs (4 words allocated)
1 to 5 VDC, 0 to 10 1 to 5 VDC, 0 to 10
0 to 20 mA or 4 to 20 0 to 20 mA or 4 to 20
Output signal range VDC, or VDC, or
mA mA
−10 to 10 VDC −10 to 10 VDC
Allowable external output load resistance 2 kΩ min. 350 Ω max. 1 kΩ min. 600 Ω max.
Analog Output External output impedance 0.5 Ω max. --- 0.5 Ω max. ---
Section
Resolution 1/12000 (full scale) 1/6000 (full scale)
25°C 0.3% full scale 0.4% full scale
Overall accuracy
0 to 55°C 0.7% full scale 0.8% full scale
Set data (D/A conversion) Full scale for −10 to 10 V: E890 to 1770 hex Full scale for −10 to 10 V: F448 to 0BB8 hex
Full scale for other ranges: 0000 to 2EE0 hex Full scale for other ranges: 0000 to 1770 hex
CP1W-MAD42: 1 ms/point (6 ms/all points)
Conversion time 2 ms/point (6 ms/all points)
CP1W-MAD44: 1 ms/point (8 ms/all points)
Photocoupler isolation between analog I/O terminals and internal circuits.
Isolation method
No isolation between analog I/O signals.
CP1W-MAD42: 5 VDC: 120 mA max., 24
VDC: 120 mA max.
Current consumption 5 VDC: 83 mA max., 24 VDC: 110 mA max.
CP1W-MAD44: 5 VDC: 120 mA max., 24
VDC: 170 mA max.
21
CP1H
■ Temperature Sensor Units: CP1W-TS001/TS002/TS003/TS004/TS101/TS102

By mounting a Temperature Sensor Unit to the PLC, inputs can be obtained from thermocouples or platinum resistance thermometers, and tem-
perature measurements can be converted to binary data (4-digit hexadecimal) and stored in the input area of the CPU Unit.
CP1W-TS001 CP1W-TS002 CP1W-TS101 CP1W-TS102

Item
Thermocouples Platinum resistance thermometer
Switchable between K and J, but same type must be used for Switchable between Pt100 and JPt100, but same type must
Temperature sensors
all inputs. be used for all inputs.
Number of inputs 2 4 2 4
Allocated input words 2 4 2 4
(The larger of ±0.5% of converted value or ±2°C) ±1 digit (The larger of ±0.5% of converted value or ±1°C) ±1 digit
Accuracy
max. * max.
Conversion time 250 ms for 2 or 4 input points
Converted temperature data 16-bit binary data (4-digit hexadecimal)
Isolation Photocouplers between all temperature input signals
Current consumption 5 VDC: 40 mA max., 24 VDC: 59 mA max. 5 VDC: 54 mA max., 24 VDC: 73 mA max.
* Accuracy for a K-type sensor at -100°C or less is ±4°C ±1 digit max.
The rotary switch is used to set the temperature range.

CP1W-TS001/TS002 CP1W-TS101/TS102
Setting
Input type Range (°C) Range (°F) Input type Range (°C) Range (°F)
0 −200 to 1,300 −300 to 2,300 Pt100 −200.0 to 650.0 −300.0 to 1,200.0
K
1 0.0 to 500.0 0.0 to 900.0 JPt100 −200.0 to 650.0 −300.0 to 1,200.0
2 −100 to 850 −100 to 1,500 ---
J
3 0.0 to 400.0 0.0 to 750.0 --- Cannot be set.
4 to F --- Cannot be set. ---
22
CP1H
● Main Specifications
Item CP1W-TS003
Thermocouples or analog input *1
Temperature sensors
Switchable between K and J, but same type must be used for all inputs.
Thermocouples inputs :4 , Analog inputs :2
Number of inputs
Two analog inputs can be shared with thermocouples inputs.
Thermocouple inputs (The larger of ±0.5% of converted value or ±2°C) ±1 digit max. *2
Accuracy at 25°C Analog voltage inputs 0.5% full scale
Analog inputs 0.6% full scale
Thermocouple inputs (The larger of ±1% of converted value or ±4°C) ±1 digit max. *3
Accuracy at 0 to
Analog voltage inputs 1.0 % full scale
55°C
Analog inputs 1.2 % full scale
K: -200.0 to 1300.0°C or .300.0 to 2300.0°F
Thermocouple inputs
J: -100.0 to 850.0°C or .100.0 to 1500.0°F
Input signal range
Analog voltage inputs 0 to 10V/1 to 5V
Analog inputs 4 to 20mA
Thermocouple inputs 0.1°C or 0.1°F
Resolution
Analog inputs 1/12000 (full scale)
Analog voltage inputs ±15V
Max. rated input
Analog inputs ±30mA
External input Analog voltage inputs 1MΩ min.

impedance Analog inputs Approx. 250Ω
Averaging function Unsupported
Conversion time 250 ms for 4 input points
Converted AD data 16-bit binary data (4-digit hexadecimal)
Isolation Photocouplers between all temperature and analog input signals
*1 Only last two channels can be used as analog input.
*2 Accuracy for a K-type sensor at -100°C or less is ±4°C ±1 digit max.
DIP Switch Settings

The DIP switch is used to set the input type (temperature or analog input), the input thermocouple type (K or J) and the temperature unit (°C or °F).
Note: Set the temperature range according to the type of temperature sensor connected to the Unit. Temperature data will not be converted correctly if the temperature
range does not match the sensor.
SW Setting
Thermocouple type of temperature ON J

1
sensor OFF K
ON °F
2 Temperature unit
OFF °C
SW 1 2 3 4 5 6 3 NC
ON
Input type selection for the third ON Analog input
4
OFF input (Input 2) OFF Thermocouple
Input type selection for the fourth ON Analog input

5
input (Input 3) OFF Thermocouple
ON 1 to 5V/4 to 20mA
6 Analog input signal range
OFF 0 to 10V
Temperature input
Input type Range (°C) Range (°F)
K -200.0 to 1300.0 -300 to 2300
J -100.0 to 850.0 -100.0 to 1500
23
CP1H
● Main Specifications
Item CP1W-TS004
Thermocouples
Temperature sensors
Switchable between K and J, but same type must be used for all inputs.
Number of inputs 12
25°C (The larger of ±0.5% of converted value or ±2°C) ±1 digit max. *1
Accuracy
0 to 55°C (The larger of ±1% of converted value or ±4°C) ±1 digit max. *2
Conversion time 500 ms for 12 input points
Isolation Photocouplers between all temperature and analog input signals
DIP Switch Settings

The DIP switch is used to set the temperature unit and to set the temperature input range.
Note: Set the temperature range according to the type of temperature sensor connected to the Unit. Temperature data will not be converted correctly if the temperature
range does not match the sensor.
SW Setting
ON J
SW 1 2 1 Input type
ON
OFF K
ON °F
OFF 2 Temperature unit
OFF °C
Temperature input
Input type Range (°C) Range (°F)
K -200.0 to 1300.0 -300 to 2300
J -100.0 to 850.0 -100.0 to 1500
■ CP1W-SRT21 CompoBus/S I/O Link Unit

The CompoBus/S I/O Link Unit functions as a slave for a CompoBus/S Master Unit (or an SRM1 CompoBus/S Master Control Unit) to form an I/O
Link with 8 inputs and 8 outputs between the CompoBus/S I/O Link Unit and the Master Unit.
CompoBus/S Master Unit CP1W-SRT21 ● Specifications

(or SRM1 CompoBus/S CompoBus/S I/O Link Unit Item Model CP1W-SRT21
Master Control Unit) CP1H
ON
Master/Slave CompoBus/S Slave
1 2 3 4 5 6
Number of I/O bits 8 input bits, 8 output bits

No.
COMM
ERR Number of words 1 input word, 1 output word
SRT21
occupied in CP1H (Allocated in the same way as for
BD H NC(BS+)
EXP I/O memory other Expansion Units)
BD L NC(BS-) NC
Node number Set using the DIP switch (before the

setting CPU Unit is turned ON.)
CS/CJ Series
C200H@ Series
CQM1(H) Series Special flat cable or VCTF cable A maximum of 16 Units can be connected
SRM1 Series
CPM2C-S Series
24
CP1H
I/O Bits and I/O Allocations
With CP1H CPU Units, the beginning input and output words (CIO 0 and CIO 100) are allocated by the CPU Unit one or two words at a time. I/O
bits are allocated in word units in order of connection to Expansion Units and Expansion I/O Units connected to a CPU Unit.
Allocated words
CPU Unit
Inputs Outputs
CP1H CPU Unit with 40 I/O points CIO 0 and CIO 1 CIO 100 and CIO 101
Note: For details on the number of words allocated to Expansion Units and Expansion I/O Units, refer to Words Allocated to CP1W Expansion Units and Expansion I/O
Units on page 26.
● Example: I/O Bit Allocations When Expansion Units Are Connected

CPU Unit with 40 I/O Points + Temperature Sensor Unit + Analog Output Unit + Expansion I/O Unit with 40 I/O Points
1st Unit 2nd Unit 3rd Unit
CPU Unit with 40 I/O Points Temperature Sensor Unit Analog Output Unit Expansion I/O Unit with 40 I/O Points
CP1H-X@40D CP1W-TS002 CP1W-DA041 CP1W-40ED
Inputs CIO 0.00 to CIO 0.11 CIO 6.00 to CIO 6.11
CIO 2 to 5 None
CIO 1.00 to CIO 1.11 CIO 7.00 to CIO 7.11
24 inputs 24 inputs
16 outputs 16 outputs
Outputs CIO 100.00 to CIO 100.07 CIO 102 CIO 106.00 to CIO 106.07
None
CIO 101.00 to CIO 101.07 to CIO 105 CIO 107.00 to CIO 107.07
25
CP1H
Expansion Unit and Expansion I/O Units Specifications
■ Maximum Number of CP1W Expansion Unit and Expansion I/O Units
● CP1H CPU Unit
7 max. (Refer to restrictions below.)
■ Restrictions on the Number of CP1H Expansion Unit and I/O Unit Connections
Up to seven Expansion Units and Expansion I/O Units can be connected when a CP1H CPU Unit is used, but the following restrictions apply.
Observe these restrictions when using the models in the shaded areas in the following tables. A maximum total of 15 input words is allocated for
Expansion Units and a maximum total of 15 output words is allocated for Expansion Units and Expansion I/O Units.
● Words Allocated to CP1W Expansion Units and Expansion I/O Units

No. of words For example, the CP1W-TS002 Temperature Sensor Unit is allocated
Unit type Model
Input Output four words per Unit, so no more than three Units can be connected
CP1W-40EDR (4 words x 3 Units = 12 words). It would then be possible to mount a
40 I/O points CP1W-40EDT 2 2 combination of other Units to use the remaining three input and 15
CP1W-40EDT1 output words.
CP1W-32ER
32 outputs CP1W-32ET --- 4
Examples of Possible Combinations
CP1W-32ET1
CP1W-20EDR1 Number of Units Input Output
Expansion 20 I/O points CP1W-20EDT 1 1 CP1H-X40DR-A
I/O Units CP1W-20EDT1 CP1W-TS002 x 3 4 words x 3 Units = 12 words 0 words
CP1W-16ER CP1W -TS001 x 1 2 words x 1 Unit = 2 words 0 words
16 outputs CP1W-16ET --- 2 CP1W -20EDR1 x 1 1 word x 1 Unit = 1 word 1 word x 1 Unit = 1 word
CP1W-16ET1 4 words x 2 Units = 8
CP1W - DA041 x 2 0 words
8 inputs CP1W-8ED 1 --- words
CP1W-8ER Total: 7 Units Total: 15 words Total: 9 words
8 outputs CP1W-8ET --- 1 ≤7 Units ≤15 words ≤15 words
CP1W-8ET1
Analog Input CP1W-AD041
A/D: 4 points 4 2
Unit CP1W-AD042
DA: 2 points CP1W-DA021 --- 2
Analog Output
Unit CP1W-DA041
DA: 4 points --- 4
CP1W-DA042
A/D: 2 points
D/A: 1 point CP1W-MAD11 2 1
A/D: 4 points
Analog I/O Unit CP1W-MAD42 4 2
D/A: 2 points
A/D: 4 points
D/A: 4 points CP1W-MAD44 4 4
CP1W-TS001 2
Thermocouple (J or K) ---
CP1W-TS002 4
Thermocouple (J or K) CP1W-TS003 4 ---
Temperature Thermocouple (J or K)
Sensor Unit A/D: 2 points CP1W-TS004 2 1
Platinum resistance CP1W-TS101 2

thermometer (Pt or JPt) ---
CP1W-TS102 4
CompoBus/S
8 inputs and 8 outputs CP1W-SRT21 1 1
I/O Link Unit
26
CP1H
■ Using CP1W-CN811 I/O Connecting Cable

• I/O Connecting Cable can be connected to any Unit from the CP1H CPU Unit to the third Expansion Unit or Expansion I/O Unit (i.e., the fourth Unit).
• Only one I/O Connecting Cable can be used in each CP1H PLC.
• Even when I/O Connecting Cable is used, the above restrictions on the number of connectable CP1W Expansion Units and Expansion I/O
Units still apply.
Expansion: 1st Unit 2nd Unit 3rd Unit 4th Unit 5th Unit 6th Unit 7th Unit
Can be used. Cannot be used.
■ Using CJ-series Special I/O Units or CPU Bus Units with a CP1H CPU Unit
Up to two CJ-series Special I/O Units or CPU Bus Units can be connected by using a CP1W-EXT01 CJ Unit Adapter. The number of Units that
can be used is as described below.
● CJ-series Special I/O Units and CPU Bus Units (For details, refer to the CJ1 Catalog (Cat. No. P052)).
5 V Current 5 V Current
CJ Unit Adapter End Cover Unit name Model consumption Unit name Model consumption
CP1W-EXT01 (A) (A)
CJ1W-AD042 0.52 A CJ1W-NC113
0.25 A
Analog Input Units CJ1W-AD081-V1 CJ1W-NC213
0.42 A
CJ1W-AD041-V1 CJ1W-NC413 0.36 A
Position Control Units
CJ1W-DA042V 0.40 A CJ1W-NC133
0.25 A
CJ1W-DA08V CJ1W-NC233
Up to two CJ-series 0.14 A
Special I/O Units or Analog Output Units CJ1W-DA08C CJ1W-NC433 0.36 A
CPU Bus Units can CJ1W-DA041 High-speed Counter
0.12 A CJ1W-CT021 0.25 A
be connected. Unit
CJ1W-DA021
0.26 A
Analog I/O Unit CJ1W-MAD42 0.58 A
CJ1W-V680C11 (24 VDC
CJ1W-PH41U 0.30 A 0.13 A)
CJ1W-AD04U 0.32 A 0.32 A
CJ1W-PTS51
Process Input Units 0.25 A 0.26 A)
CJ1W-PTS52 ID Sensor Units
0.26 A
7 max. CJ1W-PTS15 CJ1W-V600C11 (24 VDC
Use CP1W-CN811 I/O Connecting Cable when 0.18 A 0.12 A)
CJ1W-PDC15
using CP1W Expansion Units and Expansion I/O 0.32 A
Units at the same time as a CJ Unit Adapter. In CJ1W-TC001
this situation, the number of CP1W Expansion CJ1W-TC002 0.24 A)
Unit and Expansion I/O Units that can be CJ1W-TC003 CJ1W-SCU42 0.38 A*
connected is subject to the restrictions described
Temperature Control CJ1W-TC004 CJ1W-SCU22 0.29 A*
above. Only one I/O Connecting Cable can be 0.25 A
Units CJ1W-TC101 CJ1W-SCU32 0.46 A
used. Serial Communications
CJ1W-TC102 Units CJ1W-SCU41-V1 0.38 A*
CJ1W-TC103 CJ1W-SCU21-V1 0.28 A*
CJ1W-TC104 CJ1W-SCU31-V1 0.38 A
CompoBus/S Master Unit CJ1W-SRM21 0.15 A Ethernet Unit CJ1W-ETN21 0.37 A
CompoNetTM Master EtherNet/IPTM Unit CJ1W-EIP21 0.41 A
CJ1W-CRM21 0.40 A
Unit
DeviceNetTM Unit CJ1W-DRM21 0.33 A
Controller Link Unit CJ1W-CLK23 0.35 A
CJ1W-NC271
MECHATROLINK-II CJ1W-NC471
0.36 A
Position Control Unit CJ1W-NCF71
CJ1W-NCF71-MA
MECHATROLINK-II
CJ1W-MCH71 0.6 A
Motion Control Unit
FL-net Unit CJ1W-FLN22 0.37 A
High-speed Data
CJ1W-SPU01-V2 0.56 A
Storage Unit
* The current consumption increases by 0.15 A/Adapt-
er when NT-AL001 Link Adapters are used.
27
CP1H
Current Consumption
● Based on the current consumption when CJ-series Special I/O Units or CPU Bus Units are used with a CP1H CPU Unit, the
maximum number of Units that can be used is two CJ-series Units and seven CP1W Expansion Units and Expansion I/O
Units.
The current consumption for the CP1H must be no more than 2 A for 5 V and 1 A for 24 V, and the total current consumption must be
no more than 30 W.
Check the total current consumption to be sure these limits are not exceeded referring to page 28 for the CP1H CPU Unit and CP1W
Expansion Unit and Expansion I/O Unit current consumptions and to the above table for CJ-series Unit current consumptions.
● CPU Units
Current consumption External power supply
Model
5 VDC 24 VDC 24 VDC (See note 5.)
CP1H-X40DR-A 0.42 A 0.07 A 0.3 A max. (0.9 A max.)
CP1H-X40DT-D 0.50 A 0.01 A ---
CP1H-X40DT1-D 0.50 A 0.02 A ---
CP1H-XA40DR-A 0.43 A 0.18 A 0.3 A max. (0.8 A max.)
CP1H-XA40DT-D 0.51 A 0.12 A ---
CP1H-XA40DT1-D 0.51 A 0.15 A ---
CP1H-Y20DT-D 0.55 A --- ---
Note: 1. The current consumption of the CP1W-ME05M Memory Cassette and the CP1W-CIF01/CIF11 Option Boards are included in the current consumption of the
CPU Unit.
2. CPU Units with DC power do not provide an external power supply.
3. The current consumptions given in the following table must be added to the current consumption of the CPU Unit if an Expansion Unit or Expansion I/O Unit
is connected.
4. The external power supply cannot be used if an Expansion Unit or Expansion I/O Unit is connected to a CPU Unit with 14 or 20 I/O points.
5. Values in parentheses are the maximum external power supply for a CPU Unit to which an Expansion I/O Unit is not connected. Refer to the CP1H CPU Unit
Operation Manual (Cat. No. W450) for details.
● Option Units
Current consumption
Unit name Model
DC5V 24 VDC
RS-232C Option Board CP1W-CIF01 --- * ---
RS-422A/485 Option Board CP1W-CIF11 --- * ---
RS-422A/485 (Isolated-type) Option Board CP1W-CIF12-V1 0.075A ---
Ethernet Option Board CP1W-CIF41 0.130A ---
LCD Option Board CP1W-DAM01 0.020A ---
Memory Cassette CP1W-ME05M --- * ---
CJ Unit Adapter CP1W-EXT01 --- * ---
* The current consumption of the following is included with the current consumption of the CPU Unit:
CP1W-ME05M Memory Cassette, CP1W-CIF01 or CP1W-CIF11 Option Board, and CP1W-EXT01 CJ Unit Adapter.
● Others : Equipment that uses internal power supply of PLC

Current consumption
Unit name Model
5 VDC 24 VDC
CJ1W-CIF11 0.04A ---
Link Adapter
NT-AL001 0.15A ---
Backlight
NV3W-MG20L-V1 0.2A ---
Programmable Terminal (Green/Orange/Red)
NV3W-V1 Backlight
NV3W-MR20L-V1 0.2A ---
(White/Pink/Red)
28
CP1H
● Expansion Units and Expansion I/O Units

Current consumption
Unit name Model
5 VDC 24 VDC
40 I/O points CP1W-40EDR 0.080 A 0.090 A

24 inputs CP1W-40EDT
16 outputs 0.160 A ---
CP1W-40EDT1
CP1W-32ER 0.049 A 0.131 A
32 outputs CP1W-32ET
0.113 A ---
CP1W-32ET1
20 I/O points CP1W-20EDR1 0.103 A 0.044 A

12 inputs CP1W-20EDT
Expansion I/O Units 8 outputs 0.130 A ---
CP1W-20EDT1
CP1W-16ER 0.042 A 0.090 A
16 outputs CP1W-16ET
0.076 A ---
CP1W-16ET1
8 inputs CP1W-8ED 0.018 A ---
CP1W-8ER 0.026 A 0.044 A
8 outputs CP1W-8ET
0.075 A ---
CP1W-8ET1
CP1W-AD041 0.100 A 0.090 A
Analog Input Unit A/D: 4 points
CP1W-AD042 0.100 A 0.050 A
DA: 2 points CP1W-DA021 0.040 A 0.095 A
Analog Output Unit CP1W-DA041 0.080 A 0.124 A
DA: 4 points
CP1W-DA042 0.070 A 0.160 A
A/D: 2 points
CP1W-MAD11 0.083 A 0.110 A
D/A: 1 point
A/D: 4 points
Analog I/O Unit CP1W-MAD42 0.120 A 0.120 A
D/A: 2 points
A/D: 4 points
CP1W-MAD44 0.120 A 0.170 A
D/A: 4 points
CP1W-TS001
Thermocouple (J or K) 0.040 A 0.059 A
CP1W-TS002
Thermocouple (J or K) CP1W-TS003 0.070 A 0.030 A
Temperature Sensor Unit
Thermocouple (J or K) CP1W-TS004 0.080 A 0.050 A
Platinum resistance CP1W-TS101
thermometer (Pt or JPt) 0.054 A 0.073 A
CP1W-TS102
CompoBus/S I/O Link Unit 8 inputs and 8 outputs CP1W-SRT21 0.029 A ---
29
CP1H
Dimensions (Unit: mm)
■ CPU Units
CP1H CPU Units (X/XA/Y Types)
150 85
140 8
Weight:
CP1H-@@@-A (AC power supply):
740 g max.
CP1H-@@@-D DC power supply):
110 100 90 590 g max.
Four, 4.5 dia.
■ Expansion Units and Expansion I/O Units

CP1W-20ED@@, CP1W-16E@@, CP1W-8E@@
CP1W-AD04@, CP1W-DA021/04@, CP1W-SRT21
CP1W-MAD@@, CP1W-TS@@1/@@2/@@3
COM 01 03 05 07 09 11 COM 01 03
NC 00 02 04 06 08 10 00 02
IN CH
IN
CH 00 01 02 03 04 05 06 07
CH 00 01 02 03
08 09 10 11
08 09 10 11
20EDR1 90 8ED 90
OUT
CH 00 01 02 03 04 05 06 07
CH EXP EXP
NC 00 01 02 04 05 07 04 06
NC COM COM COM 03 COM 06 COM 05 07
86 66 50
50
CP1W-40ED@ Unit name Model number Weight

CP1W-32E@@ CP1W-40EDR 380 g
CP1W-TS004 CP1W-40EDT/-40EDT1 320 g
CP1W-32ER 465 g
150
140 CP1W-32ET/-32ET1 325 g
Expansion I/O
CP1W-20EDR1/-20EDT/-20EDT1 300 g
Units
CP1W-16ER 280 g
CP1W-16ET/-16ET1 225 g
NC NC COM 01 03 05 07 09 11 01 03 05 07 09 11
NC NC 00 02 04 06 08 10 00 02 04 06 08 10
CH CH CP1W-8ED 200 g
CH
IN
CH
CH
00
00
01
01
02
02
03
03
04
04
05
05
06
06
07
07
08
08
09
09
10
10
11
11 CP1W-8ER/-8ET/-8ET1 250 g
OUT 00 01 02 03 04 05 06 07
110 100 90 CH
00 01 02 03 04 05 06 07 40EDR
CP1W-AD041/-DA041/-DA021 200 g
CP1W-AD042/-DA042 250 g
CH CH EXP Analog Units
NC
NC
COM
00
COM
01
COM
02
03
04
COM
05
06
07
COM
00
01
02
03
04
COM
05
06
07
CP1W-MAD11 150 g
CP1W-MAD44/-MAD42 250 g
CP1W-TS001/-TS002/
Four, -TS101/-TS102 250 g
8 Temperature
4.5 dia.
50 Sensor Units CP1W-TS003 240 g
CP1W-TS004 570 g
CompoBus/S
CP1W-SRT21 200 g
I/O Link Unit
30
CP1H
■ CJ-series Special I/O Units and CPU Bus Units ■ CJ Unit Adaptor
CP1W-EXT01
16.4
2.7 2.7 65.5
5.7 7.6 65
90 90
95.4 90
2.7 31 65 2.7 31
89
65.5
Note: It takes an example about the size.
■ CP1H
Example: Two CJ-series Units (31-mm widths) Connected Using a CJ Unit Adapter
234.3
SYSMAC
CP1H IN
L1 L2/N COM 01 03 05 07 09 11 01 03 05 07 09 11
BATTERY 00 02 04 06 08 10 00 02 04 06 08 10
POWER
PERIPHERAL ERR/ALM EXP
BKUP
MEMORY
+ 00 01 02 03 04 06 00 01 03 04 06
− COM COM COM COM 05 07 COM 02 COM 05 07
100CH 101CH
1CH
OUT
150 31 31
7.6 14.7
31
CP1H
Related Manuals
Cat. No. Model numbers Manual name Description
CP1H-X40D@-@ CP Series Provides the following information on the CP Series:
CP1H-XA40D@-@ CP1H CPU Unit • Overview, design, installation, maintenance, and other basic specifications
CP1H-Y20DT-D Operation Manual • Features
• System configuration
W450 • Mounting and wiring
• I/O memory allocation
• Troubleshooting
Use this manual together with the CP1H Programmable Controllers Programming
Manual (W451).
CP1H-X40D@-@ CP Series Provides the following information on the CP Series:
CP1H-XA40D@-@ CP1H CPU Unit • Programming instructions
CP1H-Y20DT-D Programming Manual • Programming methods
W451 • Tasks
• File memory
• Functions
Use this manual together with the CP1H Programmable Controllers Operation
Manual (W450).
CS1G/H-CPU@@H CS/CJseries Describes commands addressed to CS-series and CJ-series CPU Units, including
CS1G/H-CPU@@-V1 Communications C-mode commands and FINS commands.
CS1D-CPU@@HA Commands Reference Note: This manual describes on commands address to CPU Units regardless of the
CS1D-CPU@@SA Manual communications path. (CPU Unit serial ports, Serial Communications
CS1D-CPU@@H Unit/Board ports, and Communications Unit ports can be used.)
CS1D-CPU@@S Refer to the relevant operation manuals for information on commands ad-
W342 CS1W-SCU21 dresses to Special I/O Units and CPU Bus Units.
CS1W-SCB21-V1/41-V1
CJ1G/H-CPU@@H
CJ1G-CPU@@P
CP1H-CPU@@
CJ1G-CPU@@
CJ1W-SCU21-V1/41-V1
32
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have
any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing
by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE
PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products
or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,
to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the
non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price
of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other
claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,
installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or
unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in
writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is
not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,
or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with
respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it
to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice
to change part numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be
assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to
confirm actual specifications of purchased Product.
Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
Note: Do not use this document to operate the Unit.
OMRON Corporation Industrial Automation Company Authorized Distributor:

Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V. OMRON ELECTRONICS LLC
Wegalaan 67-69-2132 JD Hoofddorp One Commerce Drive Schaumburg,
The Netherlands IL 60173-5302 U.S.A.
Tel: (31)2356-81-300/Fax: (31)2356-81-388 Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD. OMRON (CHINA) CO., LTD. © OMRON Corporation 2012-2017 All Rights Reserved.
No. 438A Alexandra Road # 05-05/08 (Lobby 2), Room 2211, Bank of China Tower, In the interest of product improvement,
Alexandra Technopark, 200 Yin Cheng Zhong Road, specifications are subject to change without notice.
Singapore 119967 PuDong New Area, Shanghai, 200120, China CSM_11_7_1118 Printed in Japan
Tel: (65) 6835-3011/Fax: (65) 6835-2711 Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 Cat. No. P080-E1-03 1117 (0312)

CP1H

Uploaded by

Copyright:

Available Formats

CP1H

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CP1H

Uploaded by

Copyright:

Available Formats

CP series CP1H CPU Unit

1. Class 3. Output classification

CP1H-X CPU Units AC power

■ Options for CPU Units

RS-232C Option Board CP1W-CIF01

Memory Cassette Can be used for backing up programs or auto-booting. CP1W-ME05M

* When using CP1W-CIF41 Ver.1.0, one Ethernet port can be added.

-- 8 Transistor (sinking) CP1W-8ET

Transistor (sourcing) CP1W-8ET1

12 8 Transistor (sinking) CP1W-20EDT

Transistor (sourcing) CP1W-20EDT1

■ I/O Connecting Cable

■ Optional Products, Maintenance Products and DIN Track Accessories

■ CJ-series Special I/O Units and CPU Bus Units

Category Name Specifications Model

Serial Communications 2 RS-422A/485 ports CJ1W-SCU32

■ Industrial Switching Hubs

■ Built-in Input Area

■ Built-in Output Area

■ Terminal Block Arrangement

● NC A0- B0- Z0- A1- B1- Z1- 00 04 10 00 02 04 ●

NC CW0+ CCW0+ CW1+ CCW1 NC NC 04 05 07 00 02 ●

● NC CW0- CCW0- CW1- CCW1- + − COM 06 COM 01 03

LIne-driver outputs (See note.)

● High-speed Counter Function Input Specifications

• Up/down input mode

2.5 μs min. 2.5 μs min. T1,T2,T3,T4 : 2.5 μs min

● Interrupt Input Counter Mode

ON/OFF delay OFF

● High-speed Counter Inputs (Line-driver Inputs)

• Pulse plus direction input mode • Differential phase input mode

T1,T2,T3,T4 : 0.5 μs min.

Common terminal current (A)

● CPU Units with Transistor Outputs (Sinking/Sourcing)

COM (−) COM (−)

Circuit configuration Sourcing Outputs Sourcing Outputs

● Pulse outputs ● Pulse outputs

■ Analog I/O Specifications (CP1H-XA CPU Units Only)

The following can be used for either port.

CP1W-CIF01 RS-232C Option Board

(Option board slot 1)

Host Link, No-protocol, NT Link (1: N),

Can be used with either port.

■ Ethernet Communications Specifications (CP1W-CIF41)

Item FINS Communications Service Specifications

■ LDC Option Board (CP1W-DAM01)

● Relay Outputs (CP1W-40EDR/32ER/20EDR1/16ER/8ER)

Output load current (%)

● Transistor Outputs (Sinking/Sourcing)

Output LED Output LED

■ CP1W-AD041/AD042/DA021/DA041/DA042/MAD11/MAD42/MAD44 Analog Units

● Analog Input Units

● Analog Output Units

Overall 25°C 0.4% full scale 0.3% full scale

● Analog I/O Units

Analog Input Resolution 1/12000 (full scale) 1/6000 (full scale)

■ Temperature Sensor Units: CP1W-TS001/TS002/TS003/TS004/TS101/TS102

CP1W-TS001 CP1W-TS002 CP1W-TS101 CP1W-TS102

The rotary switch is used to set the temperature range.

External input Analog voltage inputs 1MΩ min.