Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Fact Sheet Double Motor

    Uploaded by

    Douglas Miranda
    This document summarizes a new variable displacement double motor called the HMV-02 D from Linde Hydraulics. It achieves higher maximum speeds than conventional swash plate designs in a compact size. The innovative design uses two in-line swash plate rotating groups arranged face-to-face to increase power density while only requiring one control and fewer components. This makes it around 30% lighter than a motor combined with a gearbox and suitable for wide speed range applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fact Sheet Double Motor

    Uploaded by

    Douglas Miranda
    11 views2 pages
    This document summarizes a new variable displacement double motor called the HMV-02 D from Linde Hydraulics. It achieves higher maximum speeds than conventional swash plate designs in a compact size. The innovative design uses two in-line swash plate rotating groups arranged face-to-face to increase power density while only requiring one control and fewer components. This makes it around 30% lighter than a motor combined with a gearbox and suitable for wide speed range applications.

    Original Description:

    double

    Original Title

    Fact-sheet-Double-motor

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes a new variable displacement double motor called the HMV-02 D from Linde Hydraulics. It achieves higher maximum speeds than conventional swash plate designs in a compact size. The innovative design uses two in-line swash plate rotating groups arranged face-to-face to increase power density while only requiring one control and fewer components. This makes it around 30% lighter than a motor combined with a gearbox and suitable for wide speed range applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views2 pages

    Fact Sheet Double Motor

    Uploaded by

    Douglas Miranda
    This document summarizes a new variable displacement double motor called the HMV-02 D from Linde Hydraulics. It achieves higher maximum speeds than conventional swash plate designs in a compact size. The innovative design uses two in-line swash plate rotating groups arranged face-to-face to increase power density while only requiring one control and fewer components. This makes it around 30% lighter than a motor combined with a gearbox and suitable for wide speed range applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Linde Hydraulics

    Variable displacement
    HMV-02 D double motor

    This new axial piston motor has been developed by Linde


    Hydraulics to achieve maximum speeds higher than conven-
    tional swash plate designs. Additionally, a large displacement
    volume in a compact design means wider transmission speed
    ranges, normally achieved with modular transmissions, are
    possible. The HMV-02 D is about 30 % lighter than a motor
    combined with transfer gear box, and has a smaller footprint.

    The increased power density was achieved through the


    innovative design of two in-line swash plate rotating groups
    in a "face-to-face" arrangement. As a result, only one control
    is needed to adjust the displacement volume of the two
    motors. The inner lateral forces are compensated so that
    only one drive shaft and two (instead of four) bearings are
    required for both rotating groups.

    Design Characteristics Advantages

    >> Axial piston double motor in swashplate design for >> High power density
    high pressure open and closed circuit systems >> High starting torque
    >> Two rotating groups in face-to-face arrangement >> High speed capability
    with common control >> Compact dimensions
    >> PTO through-drive motor >> Low weight
    >> Positive control (default=Vmin) >> Increased average efficiency

    General technical data

    Nominal size 105 165


    Displacement Maximum displacement cc/rev 210 331.2
    Max. operating speed at Vmax rpm 3300 2900
    Maximum speed at Vmax1 rpm 3400 3100
    Speed
    Max. operating speed at Vmin rpm 4100 3500
    Maximum speed at Vmin1 rpm 4400 3700
    Nominal pressure bar 450 450
    Pressure Maximum pressure2 bar 500 500
    Max. housing pressure bar 2.5 2.5

    Torque Output torque Nm 1437 2267


    at p= 430 bar and Vmax

    Corner power (theoretical) kW 677 878


    Weight (without oil) approx. kg 98 149
    1 highest transient speed, that can temporarily occur
    1 highest transient pressure, that can temporarily occur
    Linde Hydraulics
    Variable displacement
    HMV-02 D double motor

    Customer interfaces

    Shafts Flanges Ports

    >> Nominal size 105 >> Nominal size 105 >> Nominal size 105
    - ANSI B92.1, 16/32 - 23 teeth - 4-hole (customized) - radial working ports,
    (coupling flange optional) 152,4 / 200 mm size 32

    >> Nominal size 165 >> Nominal size 165 >> Nominal size 165
    - ANSI B92.1, 16/32 - 27 teeth - 4-hole ISO 3019-1 - radial working ports,
    (coupling flange optional) 165,1 / 224,5 mm size 38

    >> More shafts upon request >> More flanges upon request >> More ports upon request

    Application examples

    C A

    B
    C
    A

    Category Category

    150 kW 180 kW 200 kW 50 kW 60 kW 150 kW

    Equipment Equipment

    A 1 x HPV 135-02 E2 A 1 x HPV 55-02 E2


    B 1 x HMV 165-02 D E6 B 1 x HMV 105-02 D E6
    C 1 x iCon C 1 x iCon

    Linde Hydraulics GmbH & Co. KG


    Wailandtstraße 13
    63741 Aschaffenburg
    Fon +49 6021 150 00
    Email info@linde-hydraulics.com
    Web http://www.linde-hydraulics.com

    You might also like