Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    g9) Berger Apcofine 905 - 8096

    Uploaded by

    Wasek Sarker
    Berger Apcofine 905 is a two-component, high-build, high-solids epoxy polysiloxane coating designed for weatherability. It offers the properties of both high performance epoxy and polyurethane in a single coat. It has excellent gloss and color retention along with good chemical resistance and corrosion resistance. It can be applied by airless or conventional spray over suitably prepared and primed surfaces like inorganic zinc coatings. Proper surface preparation is required to achieve the best performance from this coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    g9) Berger Apcofine 905 - 8096

    Uploaded by

    Wasek Sarker
    31 views2 pages
    Berger Apcofine 905 is a two-component, high-build, high-solids epoxy polysiloxane coating designed for weatherability. It offers the properties of both high performance epoxy and polyurethane in a single coat. It has excellent gloss and color retention along with good chemical resistance and corrosion resistance. It can be applied by airless or conventional spray over suitably prepared and primed surfaces like inorganic zinc coatings. Proper surface preparation is required to achieve the best performance from this coating.

    Original Description:

    BERGER APCOFINE 905 specification

    Original Title

    g9)berger apcofine 905_8096

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Berger Apcofine 905 is a two-component, high-build, high-solids epoxy polysiloxane coating designed for weatherability. It offers the properties of both high performance epoxy and polyurethane in a single coat. It has excellent gloss and color retention along with good chemical resistance and corrosion resistance. It can be applied by airless or conventional spray over suitably prepared and primed surfaces like inorganic zinc coatings. Proper surface preparation is required to achieve the best performance from this coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views2 pages

    g9) Berger Apcofine 905 - 8096

    Uploaded by

    Wasek Sarker
    Berger Apcofine 905 is a two-component, high-build, high-solids epoxy polysiloxane coating designed for weatherability. It offers the properties of both high performance epoxy and polyurethane in a single coat. It has excellent gloss and color retention along with good chemical resistance and corrosion resistance. It can be applied by airless or conventional spray over suitably prepared and primed surfaces like inorganic zinc coatings. Proper surface preparation is required to achieve the best performance from this coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    BERGER PRODUCT SPECIFICATIONS

    BERGER APCOFINE 905


    Epoxy Polysiloxane Gloss Finish

    PRODUCT Two component, high build, high solid, weatherable epoxy polysiloxane coating
    DESCRIPTION

    DESIGN • Designed as a weatherable coating which offers properties both of high performance epoxy
    and polyurethane in single coat
    FEATURES
    • Excellent gloss and colour retention
    • High solids, VOC compliant
    • Excellent resistance to corrosion
    • Good chemical resistance towards splash and spill
    • Recommended for direct application over Inorganic Zinc Coating

    PHYSICAL Recommended Application Data m2/l


    Wet [µm] Dry [µm]
    CHARACTERISTICS Theoretical Coverage 112 100 9
    Volume solids 90 ± 2% (based on ASTM D2697)
    Dry Film Thickness Range 100 µm to 125 µm
    Flash Point 29 °C
    Finish Gloss
    Colour Range Standard Colours
    Standard Packing Size 20 litres set ( 17.2 litres Base : 2.8 litres Hardener)
    Mix Ratio (by volume) 6 Base : 1 Hardener

    APPLICATION AIRLESS SPRAY Tip Size : 0.43– 0.53 mm ( 17 -21 thou )


    Recommended method of
    METHOD application
    Pressure : 160 –200 kg/cm2 (2300 – 2800 psi)
    CONVENTIONAL AIR May be used.
    SPRAY
    BRUSH OR ROLLER May be used. However, additional coats may be required to
    achieve the recommended film thickness. Suitable for stripe
    coating, weld-seams, edges, corners, rivets, etc.

    DRYING &
    CURING TIME Substrate Touch Dry Hard Dry Overcoating Interval Pot Life
    Temperature Minimum Maximum
    15 °C 10 hours 24 hours 10 hours 7 days 3 hours
    25 °C 5 hours 18 hours 5 hours 5 days 2 hours
    35 °C 3 hour 12 hours 3 hours 4 days 1 hour

    USEFUL THINNER : SOLVALUX 7-45 (Maximum 5% addition)


    INFORMATION
    CLEANER : SOLVALUX 7-77
    STORAGE : Store in a cool dry shaded area.
    SHELF LIFE AT 25 ºC : 12 months minimum when stored as prescribed in the MSDS.

    BERGER APCOFINE 905 REVISION 04-2013


    G9
    BERGER PRODUCT SPECIFICATIONS
    SURFACE The service life span and the service performance of BERGER APCOFINE 905 is directly
    related to the degree of surface preparation.
    PREPARATION
    STEEL
    • For optimum performance, this product should be applied to a surface that has been blast
    cleaned to SA 2 ½ of Swedish Standard and minimum surface profile of 50 microns.
    Suitably primed and built (e.g. with Zincanode 330 or EPILUX 610 and EPILUX 58HS)
    • This coating is usually applied over a suitable primer and undercoat or build-coat. This
    underlying system should be sound and undamaged.
    • Ensure that the surface to be over-coated is clean, dry, and free from dust, grease and oil,
    or any other surface contaminants.
    • Always ensure the maximum over-coating time for the primer or build-coat has not been
    exceeded prior to application.
    CONCRETE
    • New concrete should be left for at least 21 days to cure before coating.
    • The moisture content of the concrete surface should be checked and ensured to be below
    6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter.
    • The surface should be dry, free from surface contaminants, sound and undamaged.
    • Apply one coat of suitable primer/sealer such as Epimastic 3000HS applying BERGER
    APCOFINE 905.
    To avoid condensation of moisture onto substrate prior to coating application, relative humidity
    should not exceed 85% and substrate temperature should be more than 3 °C above Dew Point.

    SUITABLE PRIMERS Epilux 610, Epilux 78, Epilux 171, Epilux 800, Zincanode 685, Zincanode 330, Luxaprime 1501,
    Epilux 85
    SUITABLE
    Epilux 58 HS, Epilux 218
    INTERMEDIATES
    NOTES • The coating specifications given above are typical. For specific recommendations to suit
    individual applications. Please refer to your Berger Paints representative.
    • Condensation occurring during or immediately after application may result in a drop in
    gloss and inferior film properties.
    • Do not apply this product when the pot-life is exceeded, even if the paint still appears
    liquid.
    • Premature exposure to ponding-water will cause colour change, especially with dark
    colours and at low temperatures.
    SAFETY Avoid contact with eyes and skin. Wear suitable protective clothing such as overalls, goggles,
    PRECAUTION dust mask and gloves. Use barrier cream.
    Ensure that there is adequate ventilation in the area where the product is being applied. Do not
    breathe in vapour or spray mist.
    This product is flammable. Keep away from sources of ignition. Do not smoke.
    Take precautionary measures against static discharge.
    In case of fire, blanket flames with foam, carbon dioxide or dry chemicals.
    FIRST AID Eyes : In the event of accidental splashes, flush eyes with warm water immediately
    and seek medical advice.
    Skin : Wash skin thoroughly with soap and water or approved industrial cleaner.
    Do Not Use solvents or thinners.
    Inhalation : Remove to fresh air, loosen collar and keep patient rested.
    Ingestion : In case of accidental ingestion, DO NOT INDUCE VOMITING. Obtain
    immediate medical attention.
    For further safety information, please refer to our Material Safety Data Sheet (MSDS)

    DISCLAIMER The information provided on this data sheet is not intended to be complete and is provided as general advice
    only. It is the responsibility of the user to ensure that the product is suitable for the purpose for which he
    wishes to use it. As we have no control over the treatment of the product, the standard of surface
    preparation of the substrate, or other factors affecting the use of this product, we are not responsible for its
    performance nor would we accept any liability whatsoever or howsoever arising from the use of this product
    unless specifically agreed to in writing by us. The information contained in this data sheet may be modified
    by us from time to time, and without notice, in the light of our experience and continuous product
    development.

    BERGER APCOFINE 905 REVISION 04-2013


    G9

    You might also like