Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

User Manual

Download as pdf or txt
Download as pdf or txt
You are on page 1of 12

56K Analog Modem

User’s Manual

May, 2005
Copyright

Copyright © 2002 by this company. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written permission of this
company.

Disclaimer
This company makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Any software described in this manual is sold or licensed
"as is". Should the programs prove defective following their purchase, the buyer (and not this
company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair,
and any incidental or consequential damages resulting from any defect in the software.
Further, this company reserves the right to revise this publication and to make changes from
time to time in the contents hereof without obligation to notify any person of such revision or
changes.

All brand and product names mentioned in this manual are trademarks and/or registered
trademarks of their respective holders.

1
Contents

1 Introduction ……………………………………………………………. 2
1.1 System Requirements ……………………………………………………………….. 3
1.2 Package Contents ……………………………………………………………………. 3
2 Hardware Installation Instructions ………………………………… 4
2.1 PCI Interfaced Analog Modem Card …………………………………………………. 4
3 Software Driver Installation ………………………………..,………. 5
3.1 Modem Software Driver Installation Procedures……………………………………. 5
3.1.1 For Windows 2000 and XP ………………………………………………………..….. 6
3.1.2 For Windows 98SE and ME .………………………………………………………….. 8
3.2 Contact Information …………………………………………………………………….11

2
1. Introduction
Fax Modem Installation CD is an installation utility for internal Fax, Voice/Fax and Voice/Fax
with Speaker Phone Analog Modems. It automatically detects and installs recently installed
modem hardware under Windows 98SE, ME, 2000 and XP. This utility includes Install Driver,
Install Software Utilities, User Manual and Readme four sections. Click Install Driver to start
analog modem device driver installation process. Install Software Utilities includes “FAX
TALK Communicator SE” (all modem software driver installation program), FAX TALK
NetOnHold (modem software driver installation program for modems with Hold-on-Call
feature), Adobe Reader 6.0 and Panda Antivirus Platinum 9.0. User Manual includes this
user’s manual and specs for modem this utility supports. Readme includes modem software
driver locations and modem hardware installation instructions.

1.1 System Requirements


z Pentium 100 Mhz CPU or faster
z 32 MB system memory or more
z 10 MB free space on your hard drive
z 256-color VGA or higher resolution
z CD-ROM drive
z One available PCI slot for internal modem.
z Microsoft Windows 98SE, ME, XP, or 2000 operating system disk

1.2 Package Contents


z One internal Analog Modem
z One RJ-11 Cable
z Fax Modem Installation CD CD-ROM disk
z Quick Installation Guide

If any of above items is missing or damaged, please contact your local dealer immediately.

3
2. Hardware Installation Instructions
2.1 PCI Interfaced Analog Modem Card
1) Open PC case and insert PCI Card into an available PCI slot.
2) Close PC case, then plug one end of RJ-11 cables into modem’s LINE jack and the other
end into telephone wall jack.

4
3. Software Driver Installation
3.1 Modem Software Driver Installation Procedures
Insert FAX Modem Installation CD into CD-ROM drive then window below will
appear.

Install Driver: Click Install Driver to start analog modem installation process.
Install Software Utilities: Install Software Utilities includes “FAX TALK Communicator SE” (all
modem software driver installation program), FAX TALK NetOnHold (modem
software driver installation program for modems with Hold-on-Call feature), Adobe
Reader 6.0 and Panda Antivirus Platinum 9.0.
User Manual: User Manual includes this user’s manual and specs for all modems this utility
supports.
Readme: Readme includes modem software driver locations and modem hardware
installation instructions.

5
3.1.1 For Windows 2000 and XP
1) Once click Install Driver to start the analog modem installation, window below will appear:

2) After Fax Modem Installation Utility finishes installing corresponding analog modem
device driver, window below will appear. Click OK to complete the installation
process.

3) Click Exit to close FAX Modem Installation Utility.

6
4) To check if modem is properly installed:
For Windows XP
Click “Start Æ Control Panel Æ Phone and Modem Options”.

7
3.1.2 For Windows 98SE and ME
1) Once click Install Driver to start the analog modem installation, window below will appear:

2) After Fax Modem Installation Utility finishes copying analog modem device driver, window
below will appear then click OK to reboot your system.

3) After system boots up, operating system will detect the recently installed analog modem,
window below will appear then click Next to continue:

8
4) Click Next to continue:

5) Select Specify a location (utility automatically gives driver location, so you don’t have to
enter the driver location path) then click Next to continue:

9
6) Click Next to continue:

7) After operating system finishes installing the analog modem driver, click Finish to
complete the device driver installation:

10
8) To check if modem is properly installed:
For Windows 98SE
Click “Start Æ Settings Æ Control Panel Æ Modems”.

3.2 If you have trouble to install modem on your system, please contact
us.
Before contacting us, make sure collect following information. With complete
information of your problem, we will provide you accurate answers.

Model Name:
Serial Number:
PC Settings:
Other:

11

You might also like