PID Sensor - New Datasheet
PID Sensor - New Datasheet
PID Sensor - New Datasheet
ionscience.com
Unrivalled Gas Detection.
MARKET LEADING PHOTOIONISATION
SENSOR TECHNOLOGY CAPABLE OF
DETECTING LOW LEVEL VOC GASES
DESIGNED FOR USE IN FIXED AND
PORTABLE INSTRUMENTATION
Key features The Ion Science MiniPID 2 is a
simple plug-and-play sensor, able
PPM MiniPID 2:
Our PPM sensor is designed for
• Humidity-resistant to deliver dynamic and dependable detecting VOCs over the widest
• Anti-contamination design response to thousands of volatile dynamic range on the market
• 10,000 hours lamp life organic compounds (VOCs) in without compromising performance.
• World leading many diverse applications. It is also the only PID sensor
temperature stability with a lamp out diagnostic.
• 10 eV, 10.6 eV and 11.7eV All MiniPID 2 sensors include
lamps available patented Fence Electrode
Technology for industry leading
PPB MiniPID 2:
• Built-in diagnostics
• Wide dynamic range humidity resistant performance The PPB sensor is optimised
• Serviceable electrode and anti-contamination design, to deliver an exceptionally low
stack and lamp protecting the sensor from background which allows for
• Intrinsically safe moisture, dust and aerosols. optimum low-end sensitivity whilst
• Series 4/A1 format maintaining a wide dynamic range.
• Expected life > 5 years Its application-specific integrated
• Manufactured in the UK circuit (ASIC) provides rapid 10 eV MiniPID 2:
& supported worldwide and reliable lamp strike and The 10 eV sensor is used for
exceptional temperature stability. enhanced selectivity of compounds
with lower ionisation energies.
Designed for both diffusive and A key application is measuring
pumped sampling, MiniPID 2 ambient levels of aromatic
delivers an exceptional response compounds, including benzene.
time and clear down.
11.7 eV MiniPID 2:
MiniPID 2 incorporates our next- Only available from Ion Science,
generation long-life lamp which the 11.7 eV lamp extends the range
provides exceptional stability of detectable compounds to
and long-term performance, include chlorocarbons, unsaturated
enabling reliable detection fluorocarbons, formaldehyde,
for 10,000 hours of use. ethylene and methanol.
Typical Applications
• Personnel safety
• Industrial hygiene
• Soil contamination & remediation
• Fugitive emissions
• Law enforcement
• Emergency response
• Leak detection
• Fenceline monitoring
• Arson investigation
• Air quality monitoring
• EPA method 21
• HVAC + Building management
systems (BMS)
ENVIRONMENTAL
Certification
LIFETIME & WARRANTY Europe ATEX II 1G Ex ia IIC Ga (-40 °C ≤ Ta ≤ +55 °C) @ 1.1W
(-40 °C ≤ Ta ≤ +65 °C) @ 0.9W
Expected Life >5 years Worldwide IECEx II 1G Ex ia IIC Ga (-40 °C ≤ Ta ≤ +55 °C) @ 1.1W
Lamp Life 10.6 eV 10,000 hours (-40 °C ≤ Ta ≤ +65 °C) @ 0.9W
North America UL913 (8th) EditionClass I, II, III, Division 1 CSA-C22.2 No157-92
Warranty 10.6 eV lamp and MiniPID Body = 12 months
Eurasian № EAЭC RU C-GB.HA65.B.00635/20
11.7 eV lamp = 3 months Customs Union
MiniPID 2 V1.4 this publication is not intended to form the basis of a contract and specifications can change without notice.
* Performance refers to Isobutylene in air at 20 °C and 1 atm.
Distributed by: