Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
113 views

Test No 4cc

This document contains 30 multiple choice questions testing knowledge of welding processes and techniques. The questions cover topics such as welding defects, welding consumables, non-destructive testing methods, metallurgy, and welding codes and standards. The document is assessing fundamental welding concepts and terminology.

Uploaded by

Salman Ghaffar
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
113 views

Test No 4cc

This document contains 30 multiple choice questions testing knowledge of welding processes and techniques. The questions cover topics such as welding defects, welding consumables, non-destructive testing methods, metallurgy, and welding codes and standards. The document is assessing fundamental welding concepts and terminology.

Uploaded by

Salman Ghaffar
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

4-MULTICHOICE PAPER FOUR

1. Movement of the arc in MMA welding by magnetic forces is called:

a. Arc deviation
b. Arc misalignment
c. Arc blow
d. Arc eye

2. A metallurgical problem most associated with submerged arc welding is:

a. Hydrogen cracking in the HAZ


b. Solidification cracking in the weld metal
c. Hydrogen cracking in the weld metal
d. Lamellar tearing in the weld metal

3. Oxy pressure and nozzle size in flame cutting would influence:

a. The temperature required for cut initiation


b. The ability to cut stainless steels
c. The depth of the cut obtainable
d. None of the above

4. The main usage of arc cutting/gouging processes is:

a. The cutting of single bevel preparations


b. The removal of deposited welds
c. The cutting of single U type preparations
d. The cutting/gouging of non-ferrous materials only

5. Which of the following processes joins metals plastically?

a. Friction welding
b. Resistance welding
c. Plasma welding
d. All the above

6. Which electrode classification would be relevant to AWS A5.1-81?

a. E 6013
b. E 5133
c. E 7018 - G
d. Fleetweld 5

7. Which of the following coatings is associated with stove welding?

a. Rutile
b. Cellulosic
c. Basic
d. Oxidising
8. A common gas mixture used in MIG welding nickel alloys, to combine good levels of
penetration with good arc stability would be:

a. 100% CO2
b. 100% argon
c. 80% argon and 20% CO2
d. 98% argon and 2% oxygen

9. Which type of SAW flux is more resistant to moisture absorption?

a. Fused
b. Agglomerated
c. Basic
d. All the above have the same resistance

10. The flame temperature of oxy/acetylene mixture gas is given as:

a. 3200C
b. 2300C
c. 5000C
d. None of the above

11. A large grain structure in steels is said to produce:

a. Low ductility values


b. Low fracture toughness values
c. High fracture value values
d. High tensile strength

12. The likelihood of brittle fracture in steels will increase with:

a. A large grain formation


b. A reduction of in-service temperature to sub zero temperatures
c. Ferritic rather than austenitic steels
d. All the above

13. Repair welding is often more difficult than production welding due to:

a. The material being ingrained with in-service contaminants


b. Restricted access within the repair area
c. The possible position of the weld repair
d. All the above

14. Hydrogen cracking in the weld metal is likely when welding:

a. Carbon manganese steels


b. Stainless steels
c. Micro alloyed steels (HSLA)
d. Low carbon steel
15. EN 288 standard would refer to which of the following:

a. Welder approval testing


b. Welding equipment
c. Welding procedure approval
d. Consumables for welding

16. Porosity is caused by:

a. Entrapped slag in the solidifying weld


b. Entrapped gas in the solidifying weld
c. Entrapped metallic inclusions in the solidifying weld
d. None of the above

17. In a bend test the face of the specimen is in tension and the root is in compression. What type
of test is being carried out?

a. A root bend test


b. A side bend test
c. A face bend test
d. None of the above

18. Ultrasonic testing is more advantageous in detecting which of the following weld imperfections,
over other NDT methods?

a. Lack of sidewall fusion


b. Surface undercut
c. Incompletely filled groove
d. Overlap

19. Tempering is often carried out to regain toughness after which of the following processes?

a. Annealing
b. Normalising
c. Hardening
d. Stress relieving

20. The presence of iron sulphide in the weld metal is most likely to produce which of the following
upon contraction of the weld?

a. Solidification cracking
b. Hydrogen cracking
c. Intergranular corrosion
d. Stress corrosion cracking

21. Austenitic stainless steel electrodes are generally smaller in length than mild steel electrodes
because:

a. High amperage is used


b. Shelf life will be decreased
c. Their electrical conductivity is less than that of steel
d. They are more expensive
22. The voltage necessary to maintain an arc during metal arc welding is termed:

a. Mains supply voltage c. Arc voltage


b. Arc current d. Open circuit voltage

23. When MMA welding low carbon steel which electrode will give the greatest deposition rate?

a. Hydrogen controlled c. Rutile


b. Cellulosic d. Iron powder

24. Inherent rectification of the electrical output is produced in the arc when TIG welding using:

a. AC with a suppressor c. DC with reverse polarity


b. AC without a suppressor d. DC with straight polarity

25. Gamma rays and X-rays are part of a family of waves called:

a. Acoustic waves c. Electromagnetic waves


b. Light waves d. Transverse waves

26. A measure of the accuracy of a radiograph as an NDT tool is given by its:

a. Intensity c. Sensitivity
b. Density d. Exposure

27. A surface breaking crack will be detected during a magnetic particle inspection if it is:

a. At right angles to the lines of flux


b. Parallel to the lines of flux
c. At 25 to the lines of flux
d. All the above

28. The advantage of ultrasonic non-destructive testing for the examination of weldments is:

a. It can be used to locate flaws


b. It can be used to size flaws
c. It has a high sensitivity to planar flaws
d. All the above

29. Under normal contract conditions weld procedure approval tests for pipe work are:

a. Mandatory
b. Dependant on site and weather conditions
c. Dependant upon the contractor's confidence in his procedures
d. Only required when MMA welding is used

30. Hydrogen controlled electrodes were developed principally for:

a. The prevention of porosity


b. The prevention of cracking
c. The enhancement of arc voltage
d. Their ease of arc starting

You might also like