VELAN FORGED STEEL GATE VALVES

THREADED, SOCKET WELD AND FLANGED

BOLTED BONNET WELDED BONNET FLANGED BOLTED BONNET

DESIGN FEATURES
• Complies to API 602 and ASME B16.34 standards. PART STANDARD MATERIALS
• A compact but extremely sturdy design for high pressure- Body A105
temperature service.
Bonnet A105
• Solid CoCr alloy wedge (optional) ensures low friction and long Gasket Gr. 304 (stainless & graphite)
service life. Packing flange A105
• Packing rings are pre-compressed in the packing chamber to ensure Seat Gr. 410 (stainless) HF CoCr alloy
equal stress distribution, effectiveness of all rings and a high integrity Wedge CA15 HT or CoCr alloy
seal. Stem Gr. 410 (stainless)
• For welded bonnet valves, the bonnet is threaded in and torqued Stem nut
Yoke bushing
Gr. 416 (stainless)
12L14 steel
to an engineered torque value and the body bonnet joint is strength-
welded, offering double protection against leakage. (body/bonnet Gland Gr. 416 (stainless)
threads and strength-weld). Packing Graphite
Gland bolt Gr. B6
• Fully guided wedge reduces wear on seating surfaces. Gland nut Gr. 2H
• Repairable 2-piece stem drive. Cap screw Gr. B7
Handwheel Malleable iron
OPTIONAL FEATURES (SPECIAL APPLICATIONS) Handwheel nut Steel
• For highly critical applications or situations where the valve end Handwheel
lockwasher
Steel
connections may undergo non-mandatory PWHT, seal-welded seat
rings are available as a factory option. Name plate Aluminum

• A special design is also available with double packing, For other materials, trims, and
leak-off connection, live-loading and a packing blowout for easy engineering data, see pages 23 – 35.
removal of old packing.
• Bolted bonnet gate valves for alkylation service
(HF acid service see page 21).
• Parallel slide gate valves.
• API 603 NPS ½ – 1½ (DN 15 – 40), for ASME Classes 150, 300, and 600.
8 Velan reserves the right to change this information without notice. © 2020 Velan Inc. All rights reserved.
 VELAN FORGED STEEL GATE VALVES
BOLTED BONNET GATE DIMENSIONS AND WEIGHTS FLANGED FACE-TO-FACE
Size A B C D H K L Weight Size Flanged face-to-face
NPS Port End-to-end Center-to- Center-to- Handwheel Socket Socket lb
DN top, closed top, open weld bore weld depth kg NPS
DN 150 300 600 1500 2500
800 1500 800 1500 800 1500 800 1500 800 1500 800 1500
1/4 (1) 1/4 (2) 4.00 5.50 6.50 8.50
0.25 0.25 3.13 4.00 4.81 7.13 5.31 7.75 3.00 3.50 0.555 0.38 3.30 11.00 –
8 6 6 80 102 122 181 135 197 76 89 14.1 9.5 1.5 5.0 8 102 139 165 216
3/8 (1) 3/8 (2) 4.00 5.50 6.50 8.50
0.25 0.35 3.13 4.00 4.81 7.13 5.31 7.75 3.00 3.50 0.690 0.38 3.30 11.00
–
10 6 9 80 102 122 181 135 197 76 89 17.5 9.5 1.5 5.0 10 102 139 165 216
1/2 (1) 0.38 0.50 3.13 4.00 4.81 7.13 5.31 7.75 3.00 3.50 0.855 0.38 3.30 11.00 1/2 (2) 4.25 5.50 6.50 8.50 10.38
15 10 13 80 102 122 181 135 197 76 89 21.7 9.5 1.5 5.0 15 108 139 165 216 264
3/4 0.50 3.25 5.00 5.91 7.25 6.75 7.88 3.50 3.50 1.065 0.50 5.30 13.00 3/4 4.62 6.00 7.50 9.00 10.75
20 13 83 127 150 184 171 200 89 89 27.1 12.7 2.4 5.9 20 117 152 191 229 273
1 0.69 3.50 6.00 6.38 8.70 7.38 9.63 3.50 5.00 1.330 0.50 6.40 26.00 1 5.00 6.50 8.50 10.00 12.12
25 18 89 152 162 221 188 244 89 127 33.8 12.7 2.9 11.8 25 127 165 216 254 308
11/4 1.25 5.00 7.00 7.77 9.12 9.12 10.63 4.75 6.00 1.675 0.50 15.00 34.00 11/4 5.50 7.00 9.00 11.00 13.75
32 32 127 178 197 232 232 270 121 152 42.5 12.7 6.8 15.4 32 140 178 229 279 349
11/2 1.25 5.00 7.00 7.77 9.12 9.12 10.63 4.75 6.00 1.915 0.50 15.00 34.00 11/2 6.50 7.50 9.50 12.00 15.12
40 32 127 178 197 232 232 270 121 152 48.6 12.7 6.8 15.4 40 165 191 241 305 384
2 1.50 5.25 9.00 8.70 10.56 10.40 12.30 6.00 10.00 2.406 0.63 19.00 58.00 2 7.00 8.50 11.50 14.50 17.75
50 38 133 229 221 268 264 312 152 254 61.1 15.9 8.6 26.3 50 178 216 292 368 451
(1) Only for A105 (carbon) and A182 (stainless F316/F316L) body material in socket weld, (2) Only for A105 (carbon) and A182 (stainless F316/F316L)
threaded, butt weld or combination weld ends and 800 pressure class. body material in RF end connections, bolted bonnet
design and pressure classes 150, 300, and 600.
All other materials in 800 pressure class, refer to the NPS ¾ (DN 20) design.
All other materials in pressure classes 150, 300, and
600, refer to the NPS ¾ (DN 20) design.
BOLTED BONNET GATE FULL PORT DIMENSIONS AND WEIGHTS
H
Size A B C D H K L Weight
NPS Port End-to-end Center-to- Center-to Handwheel Socket Socket lb
DN top, closed top, open weld bore weld depth kg
800 1500 800 1500 800 1500 800 1500 800 1500
1/4 0.25 3.25 4.00 5.90 7.10 6.63 7.8 3.50 3.50 0.555 0.38 6.20 10 Also see page
8 6 83 102 150 180 168 198 89 89 14.1 9.5 2.8 4.5 C 17 for bellows
3/8 0.35 3.25 4.00 5.90 7.10 6.63 7.8 3.50 3.50 0.690 0.38 6.20 10 seal valves for
10 9 83 102 150 180 168 198 89 89 17.5 9.5 2.8 4.5 D
1/2 0.50 3.25 4.00 5.90 8.7 6.63 7.88 3.50 3.50 0.855 0.38 6.20 12.00 emission-free
15 13 83 102 150 221 168 200 89 89 21.7 9.5 2.8 5.4 service.
3/4 0.69 3.50 6.00 6.40 9.10 7.40 9.60 4.75 4.75 1.065 0.50 6.60 24.00
20 18 89 152 162 231 188 244 121 121 27.1 12.7 3.0 10.9
1 0.96 5.00 7.00 7.80 9.10 9.10 10.60 6.00 6.00 1.330 0.50 15.00 32.00
25 24 127 178 198 231 231 269 152 152 33.8 12.7 6.8 14.5
11/4 1.25 5.00 7.00 7.80 9.10 9.10 10.60 6.00 6.00 1.675 0.50 15.00 32.00 A K
32 32 127 178 198 231 231 269 152 152 42.5 12.7 6.8 14.5
11/2 1.50 5.25 9.00 8.60 10.60 10.40 12.30 6.00 10.00 1.915 0.50 20.00 50.00
40 38 133 229 218 269 264 312 152 254 48.6 12.7 9.1 22.7
L
2 2.00(3) 6.00 9.00 10.90 11.50 13.12 13.75 8.00 10.00 2.406 0.63 24.00 60.00
50 51 152 229 277 292 333 349 203 254 61.1 15.9 10.9 27.2 B

(3) 1.89” (48 mm) Class 1500

WELDED BONNET GATE VALVE WELDED BONNET FULL PORT GATE VALVE
DIMENSIONS AND WEIGHTS DIMENSIONS AND WEIGHTS
Size C D H Size CD H
A B K L Weight A B K L Weight
Center- Center-
Socket SocketCenter-to- Hand- lb kg Center-to- Hand- Socket Socket lb kg
NPS Port End-to-end to-top,
weld weld top, open wheel NPS Port End-to-end to-top,
top, open wheel weld weld
DN closed DN closed
bore depth bore depth
800 1500 800 1500 800 1500 800 1500 800 1500 800 1500 800 1500 800 1500 800 1500 800 1500
¼(4) 0.25 2.88 3.5 4.63 6.4 5.13 7.1 3 3.5 0.555 0.38 2.5 6.5 ½(4) 0.5 3.25 3.5 5.9 6.4 6.7 7.1 3.5 3.5 0.855 0.38 4.4 6.8
8 6 73 89 117 163 130 180 76 89 14.1 9.5 1.1 2.9 15 13 83 89 150 163 170 180 89 89 21.7 9.5 2 3.1
³⁄8(4) 0.25 2.88 3.5 4.63 6.4 5.13 7.1 3 3.5 0.69 0.38 2.5 6.5 ¾ 0.69 3.5 5 6.2 8 7 8.8 4.8 4.8 1.065 0.50 5.3 14
10 6 73 89 117 163 130 180 76 89 17.5 9.5 1.1 2.9 20 18 89 127 157 203 178 224 122 122 27.1 12.7 2.4 6.4
½(4) 0.38 2.88 3.5 4.63 6.4 5.13 7.1 3 3.5 0.855 0.38 2.5 6.5 1 0.96 5 5.25 7.8 9.4 9.1 10.8 6 6 1.330 0.50 11 20
15 10 73 89 117 163 130 180 76 89 21.7 9.5 1.1 2.9 25 24 127 133 198 239 231 274 152 152 33.8 12.7 5 9.1
¾ 0.5 3.25 3.5 5.9 6.4 6.63 7.1 3.5 3.5 1.065 0.50 4.4 6.8 1¼ 1.25 5 5.25 7.8 9.4 9.1 10.8 6 6 1.675 0.50 11 20
20 13 83 89 150 163 168 180 89 89 27.1 12.7 2 3.1 32 32 127 133 198 239 231 274 152 152 42.5 12.7 5 9.1
1 0.69 3.5 5 6.3 8.1 7.2 8.9 3.5 4.75 1.330 0.50 5.3 13 1½ 1.5 5.25 10 8.8 12.4 10.4 14.1 6 10 1.915 0.50 16 50
25 18 89 127 160 206 182 226 89 121 33.8 12.7 2.4 5.9 40 38 133 254 224 315 264 358 152 254 48.6 12.7 7.3 22.7
1¼ 1.25 5 5.25 7.77 9.4 9.12 10.8 4.75 6 1.675 0.50 11 20 2 2 6 10 10.9 12.1 13.1 14.3 8 10 2.406 0.62 21 60
32 32 127 133 197 239 231 274 121 152 42.5 12.7 5 9.1 50 51 152 254 277 307 333 363 203 254 61.1 15.7 9.5 27.2
1½ 1.25 5 5.25 7.77 9.4 9.12 10.8 4.75 6 1.915 0.50 11 20 (4) Only for A105 (carbon) body material in socket weld, threaded, butt
40 32 127 133 197 239 231 274 121 152 48.6 12.7 5 9.1
weld or combination weld ends and 800 pressure class.
2 1.5 5.25 10 8.5 12.4 10.4 14.1 6 10 2.406 0.63 16 50
50 38 133 254 216 315 264 358 152 254 61.1 15.9 7.3 22.7 All other materials in 800 pressure class, refer to the ¾" design.

Velan reserves the right to change this information without notice. © 2020 Velan Inc. All rights reserved. 9