Quick Sheet: API 594 Cast Steel Swing Check Valve
Quick Sheet: API 594 Cast Steel Swing Check Valve
Quick Sheet: API 594 Cast Steel Swing Check Valve
QS Quick sheet
Cast carbon, stainless or alloy steel
NPS 2–48 (DN 50–1200), ASME Classes 150–1500
Standard materials
ASME Class Figure number ASME Class Figure number Part Materials
150 0114C 900 7114C Body (1) WCB WC6 WC9 CF8M
300 1114C 1500 3114C
600 2114C CoCr alloy CoCr alloy CoCr alloy CoCr alloy
Seat (1) (2) faced faced faced faced
CS F11 F22 F316
l Body and cover castings are precision machined. Gasket (1) Spiral wound stainless steel/graphite
Exclusive: Disc shaft does not penetrate body. Cover stud Gr. B7 B16 B8M Cl. 2
l Body and cover joint accurately machined. Cover nut Gr. 2H Gr. 7 Gr. 8M
Fully-enclosed gasket. Cover (1) WCB WC6 WC9 CF8M
l Disc: Robust one-piece construction to withstand the severe Washer Commercial
shock of check valve service. Hardfaced with 13Cr, CoCr alloy, CA 15 or CA 15 or CA 15 or
SS 316, or Monel, ground and lapped to a mirror finish. Sizes Disc (1) 13Cr faced 13Cr faced 13Cr faced CF8M
NPS 2–6 (DN 50–150) may have solid CA 15 (13Cr) disc. SS 316 WCB WC6 WC9
disc with CoCr alloy facing also available.
Disc hanger WCB WC6 WC9 CF8M
l Disc assembly: Non-rotating disc is fastened securely to disc Disc nut Gr. 2H Gr. 4 Gr. 8M
hanger with a lock nut and cotter pin. Disc hanger is supported
on a sturdy disc carrier hinge pin of excellent bearing qualities. (1) Other materials available. (2) Hardfaced.
All parts are accessible from top for easy servicing.
l Flanges
ASME Classes: 150–300: 1⁄16” raised face.
ASME Classes: 600–1500: ¼” raised face. For forged steel check valves,
Finish: 125–250 AARH for all valves. ASME Classes 900–2500 are also available.
QS-CS 594-10-19
Velan reserves the right to change this information without notice. © 2019 Velan Inc. All rights reserved. 1
Quick sheet: API 594* cast steel swing check valve
Design specifications
Item Applicable specification
D
General design API 594 Type B
Wall thickness API 594 Type B A = Face-to-face (flanged)
Pressure–temperature rating ASME B16.34 End-to-end (butt weld)
Face-to-face dimensions for butt weld B B = Center-to-top
ASME B16.10 C = Port
and flanged valves
Flange design ASME B16.5/ASME B16.47 series A (1) D = Cover
C
Butt welding design ASME B16.25
Materials ASTM
(1) Flanges as per ASME B16.47 series B available upon request.
A
QS-CS 594-10-19
Velan reserves the right to change this information without notice. © 2019 Velan Inc. All rights reserved. 2
Quick sheet: API 594* cast steel swing check valve
D
A = Face-to-face (flanged)
End-to-end (butt weld)
B B = Center-to-top
C = Port
D = Cover
C
QS-CS 594-10-19
Velan reserves the right to change this information without notice. © 2019 Velan Inc. All rights reserved. 3