2 Person Dismantler Operators Manual
2 Person Dismantler Operators Manual
2 Person Dismantler Operators Manual
Pallet Dismantler
Installation Instructions
• Your pallet dismantler is delivered to you ready for installation, blade on.
• With the knob on the hydraulic blade tensioner closed and the ball valve in the
line open, tension the blade to 2000 psi. Close ball valve.
• Start machine momentarily, check rotation. The blade should move toward the
saw fence. If the blade moves away from the saw fence, have the electrician
change rotation.
• You're ready to use your pallet dismantling machine, If you have any trouble
• If the blade comes off during operation, disconnect power before replacing it
• If debris gets wedged in the fence during operation, disconnect power before
clearing it out
• Do not reach your hands closer than 12 inches from the blade
Specifications
• Tire air pressure 50 p.s.i
• Blade tension 2000 p.s.i.
Smart Products
Limited Warranty
All parts and workmanship are covered by warranty for a period of one year.
Smart Products
3401 North Commerce Drive
Muncie, IN 47303
Phone (765)284-9545 Toll Free (800) 401-0099 Fax(765) 284-7270
Email smartpro@smartproductsinc.com
EXCLUSIONS
This warranty does not extend to parts or materials misused or used for any other purpose than
intended or by accident and I or collision, neglect, the incorporation of, or use of, unsuitable
attachments or parts, the unauthorized, alteration of any part or cause other than defects in ma-
terial, workmanship or parts.
I. Right Guard
2. Left Guard
3. ChallneY'Weldment
4. Weldment
Smart Products
DISMANTLER
Electrical Panel
I. Start Button
4. Fuses -------1-
5. Disconnect ------1
6. Terminal Strip - -- -.4/.:
7. Contactor--_ _ __
8. Transformer - _ _ __
9. Thermal Overload - - -
10.