Grinding

Page
CONTENTS Sanbee and Sanflea ...................................................... 107

Sanroc Mini P ................................................................ 107

Sanroc Mini H ................................................................ 109

Sanroc Mini E ................................................................ 110

Sanroc Mini P/H/E Manual .............................................111

Sanroc Multi .................................................................. 112

Sanroc Micro ................................................................. 113

Sanroc Flexi ................................................................... 114

Grinding cups ............................................................... 115

Sanroc Cross/D ............................................................. 117

Sanroc Cross Duo ......................................................... 118

Sanroc X ........................................................................ 119

Accessories for Sanroc Cross/Cross D/Cross Duo

and Sanroc X ................................................................. 120

Sanroc ILP ..................................................................... 122

Sanroc ILH ..................................................................... 123

Sanroc IP ....................................................................... 124

Sanroc IE ....................................................................... 125

Sanroc IXP/IXH .............................................................. 126

Grinding wheels for Sanroc ILP/ILH/IP/IE/IXP/IXH ....... 127

Grinding
Sanbee and Sanflea

Part No.
Sanbee
Intended for grinding all kinds of button bits

Complete grinder 796-5100

8-1_53
Accessories optional
In line oiler 797-5747-50
Tools for O-ring replacement 797-5452
Cooling/tank unit, complete 797-5488-85
Technical data
Grinding gauge for button up to Ø 16 mm 795-1396
Grinding cups See page 115-116
Air pressure ...................................... 6-8 bar
Air consumption ................................ 40-55 l/s
Spindle speed.................................... 19000 r.p.m.
Recommended lubricants
Flushing air pressure ........................ Max. 6 bar
Air tool oil, 1 litre 797-5870-90
Flushing water pressure ..................... Max. 6 bar
Water consumption............................ 5-6 l/min
Hose connections:
Air, air hose....................................... 12.5 mm (1/2") ID
Water, water hose.............................. 6.3 mm (1/4") ID
Dimensions: HxWxD mm.................... 150x450x130
Weight, without package and hose ..... 2.9 kg
Weight, with package and hose.......... 3.5 kg

Sanflea
Intended for grinding all kinds of button bits
(Max. button size 10 mm)

Complete grinder 796-5116

8-1_53

Accessories optional
In line oiler 797-5747-50
Tools for O-ring replacement 797-5452
Technical data
Cooling/tank unit, complete 797-5488-85
Grinding gauge for button up to Ø 16 mm 795-1396
Air pressure ...................................... 6-8 bar
Grinding cups See page 115-116
Air consumption ................................ 16-17 l/s
Spindle speed.................................... 14000 r.p.m.
Flushing air pressure ........................ Max. 6 bar
Recommended lubricants
Flushing water pressure ..................... Max. 6 bar
Air tool oil, 1 litre 797-5870-90
Water consumption............................ 5-6 l/min
Hose connections:
Air, air hose....................................... 12.5 mm (1/2") ID
Water, water hose.............................. 6.3 mm (1/4") ID
Dimensions: HxWxD mm.................... 150x450x130
Weight, without package and hose ..... 2.9 kg
Weight, with package and hose.......... 3.5 kg

107
Grinding
Sanroc Mini P

Part No.
Sanroc Mini P
Intended for grinding all kinds of button bit.
It is capable of handling threaded and tapered
button bits upp to Ø 127 mm and DTH button
bits up to Ø 250 mm (max. shank Ø 130 mm).

Pneumatic grinder without cooling unit 796-6200

Pneumatic grinder with cooling unit 796-6201

Accessories optional
Bit holder insert for retrac-bits compl. 797-5502-50
Guard cover 797-5510-06
Arm-locking mechanism, complete 797-5510-30
Pneumatic bit-locking system, complete 797-5510-40
Bit holder for large drill bits, complete 797-5510-20
Cooling/Flushing tank unit, complete, 10 l 797-5488-75
Mounting bracket (for drill rig) 797-5510-05
Air pressure reducing valve (max.28/min.7 bar) 797-5910-28
Assembly tools for O-ring replacement 797-5452
Grinding gauge for button up to Ø 16 mm 795-1396
Grease gun 797-5870-20
Grinding cups See page 115-116

Service-exchange unit
Factory-reconditioned grinding head 797-5130-10

8 1 93
Recommended lubricants
Technical data Grease, 0.4 kg cartridge 797-5773-20
Gear oil, 1 liter 797-5870-10
Air pressure ..................................... Max. 13 bar/ Min. 6.5 bar Air tool oil, 1 liter 797-5870-90
Air consumption ................................ 40-60 l/sec
Water pressure ................................. Max. 8 bar/ Min. 4 bar
Water consumption............................ 2-4 l/min *
Rated power (motor) .......................... 1.7 kW
Electricity supply ............................... 24V DC, 5A
Coolant/flushing medium ................... Water
Air connection, air hose ..................... 20 mm (3/4") ID
Water connection, water hose ............ 9.5 mm (3/8") ID
Dimensions: HxWxD mm.................... 730x350x300
Weight ............................................. 43.5 kg

* With cooling tank unit 0,2-0,3 l/min.

108
Grinding
Sanroc Mini H

Part No.
Sanroc Mini H
Intended for grinding all kinds of button bit.
It is capable of handling threaded and cone-type
button bits upp to Ø 127 mm and DTH button
bits up to Ø 250 mm (max. shank Ø 130 mm).

Hydraulic grinder without cooling unit 796-6230

Hydraulic grinder with cooling unit 796-6231

Accessories optional
Bit holder insert for retrac-bits compl. 797-5502-50
Guard cover 797-5510-06
Arm-locking mechanism, complete 797-5510-30
Pneumatic bit-clamping device, complete 797-5510-40
Bit holder for large drill bits, complete 797-5510-20
Cooling/Flushing tank unit, complete, 10 l 797-5488-75
Mounting bracket (for drill rig) 797-5510-05
Air pressure reducing valve (max.28/min.7 bar) 797-5910-28
Assembly tools for O-ring replacement 797-5452
Grinding gauge for button up to Ø 16 mm 795-1396
Priority flow divider for fixed pumps 797-5414-01
Grease gun 797-5870-20
Grinding cups See page 115-116

8-1_95 Service-exchange unit

Factory-reconditioned grinding head 797-5130-10

Technical data Recommended lubricants

Grease, 0.4 kg cartridge 797-5773-20
Hydraulic pressure ............................ Max. 200 bar/ Min. 140 bar Gear oil, 1 liter 797-5870-10
Hydraulic-oil flow consumption........... 12 l/min Air tool oil, 1 liter 797-5870-90
Air pressure ..................................... Max. 13 bar/ Min. 4 bar
Air consumption ................................ 5-6 l/sec
Water pressure ................................. Max. 8 bar/ Min. 4 bar
Water consumption............................ 2-4 l/min *
Rated power (motor) .......................... 3.0 kW
Electricity supply ............................... 24V DC, 5A
Coolant/flushing medium ................... Water
Hydraulic connection, hydr. hose ........ R 3/8" female thread
Air connection, air hose ..................... 9.5 mm (3/8") ID
Water connection, water hose ............ 9.5 mm (3/8") ID
Dimensions: HxWxD mm.................... 730x350x300
Weight ............................................. 40 kg

* With cooling tank unit 0,2-0,7 l/min.

109
Grinding
Sanroc Mini E

Part No.
Sanroc Mini E
Intended for grinding all kinds of button bit.
It is capable of handling threaded and cone-type
button bits upp to Ø 127 mm and DTH button
bits up to Ø 250 mm (max. shank Ø 130 mm).

Electric powered grinder without cooling unit 796-6210-XX

Electric powered grinder with cooling unit 796-6211-XX

Electric powered grinder

220-240 V 1 phase 50 Hz 796-62XX-50
260 V 3 phases 50 Hz 796-62XX-51
380-420 V 3 phases 50 Hz 796-62XX-52
440 V 3 phases 50 Hz 796-62XX-55
550 V 3 phases 50 Hz 796-62XX-56
660 V 3 phases 50 Hz 796-62XX-57
500 V 3 phases 50 Hz 796-62XX-58
220-240 V 3 phases 50 Hz 796-62XX-59

220-290 V 3 phases 60 Hz 796-62XX-60

380-480 V 3 phases 60 Hz 796-62XX-61
8-1_96
550 V 3 phases 60 Hz 796-62XX-65
600 V 3 phases 60Hz 796-62XX-66

Accessories optional
Bit holder insert for retrac-bits compl. 797-5502-50
Guard cover 797-5510-06
Arm-locking mechanism, complete 797-5510-30
Technical data Pneumatic bit-clamping device, complete 797-5510-40
Bit holder for large drill bits, complete 797-5510-20
Air pressure ..................................... Max. 13 bar/ Min. 4 bar Cooling/Flushing tank unit, complete, 10 l 797-5488-75
Air consumption ................................ 2-3 l/sec Mounting bracket (for drill rig) 797-5510-05
Water pressure ................................. Max. 8 bar/Min. 4 bar Air pressure reducing valve (max.28/min.7 bar) 797-5910-28
Water consumption............................ 2-4 l/min * Assembly tools for O-ring replacement 797-5452
Rated power (motor) .......................... 1.5 kW Grinding gauge for button up to Ø 16 mm 795-1396
Coolant/flushing medium ................... Water Grease gun 797-5870-20
Air connection, air hose ..................... 9.5 mm (3/8") ID Grinding cups See page 115-116
Water connection, water hose ............ 9.5 mm (3/8") ID
Dimensions: HxWxD mm.................... 730x350x300
Weight ............................................. 43 kg Service-exchange unit
Factory-reconditioned grinding head 797-5130-10
* With cooling tank unit 0,2-0,3 l/min.
Recommended lubricants
Grease, 0.4 kg cartridge 797-5773-20
Gear oil, 1 liter 797-5870-10

110
Grinding
Sanroc Mini P/H/E Manual

Part No.
Sanroc Mini P/H/E Manual
Intended for grinding all kinds of button bit.
It is capable of handling threaded and cone-type
button bits upp to Ø 127 mm and DTH button
bits up to Ø 250 mm (max. shank Ø 130 mm).

Air powered grinder without cooling unit 796-6300

Air powered grinder with cooling unit 796-6301

Hydraulic powered grinder without cooling unit 796-6330

Hydraulic powered grinder with cooling unit 796-6331

Electric powered grinder without cooling unit 796-6310-XX

Electric powered grinder with cooling unit 796-6311-XX

Electric powered grinder

220-240 V 1 phase 50 Hz 796-63XX-50
260 V 3 phases 50 Hz 796-63XX-51
380-420 V 3 phases 50 Hz 796-63XX-52
440 V 3 phases 50 Hz 796-63XX-55
550 V 3 phases 50 Hz 796-63XX-56
660 V 3 phases 50 Hz 796-63XX-57
8-1_105 500 V 3 phases 50 Hz 796-63XX-58
220-240 V 3 phases 50 Hz 796-63XX-59

220-290 V 3 phases 60 Hz 796-63XX-60

380-480 V 3 phases 60 Hz 796-63XX-61
550 V 3 phases 60 Hz 796-63XX-65
600 V 3 phases 60Hz 796-63XX-66

Technical data
Manual P Manual H Manual E Accessories optional
Guard cover 797-5510-06
Air pressure ....................... Max. 13 bar Max. 13 bar Max. 13 bar
Min. 6.5 bar Min. 4 bar Min. 4 bar Arm-locking mechanism, complete 797-5510-30
Air consumption .................. 40-60 l/sec 2-3 l/sec 2-3 l/sec Pneumatic bit-clamping device, complete 797-5510-40
Hydraulic pressure............... Max. 200 bar Bit holder for large drill bits, complete 797-5510-20
Min. 140 bar Cooling/Flushing tank unit, complete 797-5488-75
Oil consumption................... 12 l/min Mounting bracket (for drill rig) 797-5510-05
Water pressure ................... Max. 8 bar Max. 8 bar Max. 8 bar Air pressure reducing valve (max.28/min.7 bar) 797-5910-28
Min. 4 bar Min. 4 bar Min. 4 bar Assembly tools for O-ring replacement 797-5452
Water consumption.............. 2-4 l/min * 2-4 l/min * 2-4 l/min * Grinding gauge for button up to Ø 16 mm 795-1396
Rated power (motor) ............ 1.7 kW 3 kW 1.5 kW Grease gun 797-5870-20
Air connection, hose ............ 3/4" 3/8" 3/8" Grinding cups See page 115-116
Water connection, hose ....... 3/8" 3/8" 3/8"
Dimensions: HxWxD mm...... 730x350x300 730x350x300 730x350x300
Weight ................................ 41 kg 38 kg 41 kg Service-exchange unit
Factory-reconditioned grinding head 797-5130-10

* With cooling tank unit 0,2-0,3 l/min.

Recommended lubricants
Grease, 1 kg cartridge 797-5773-20
Gear oil, 1 liter 797-5870-10
Air tool oil, 1 liter 797-5870-90

111
Grinding
Sanroc Multi

Part No.

Sanroc Multi
Intended for grinding all kinds of button bit.
It is capable of handling threaded and cone-type
button bits upp to Ø 152 mm and DTH button
bits up to Ø 280 mm (max. shank Ø 150 mm).

Grinder without cooling unit 796-6000-XX

Grinder with cooling unit 796-6001-XX

Electric powered grinder

220-240 V 1 phase 50 Hz 796-6000-50
260 V 3 phases 50 Hz 796-6000-51
380-420 V 3 phases 50 Hz 796-6000-52
440 V 3 phases 50 Hz 796-6000-55
550 V 3 phases 50 Hz 796-6000-56
660 V 3 phases 50 Hz 796-6000-57
500 V 3 phases 50 Hz 796-6000-58
220-240 V 3 phases 50 Hz 796-6000-59

220-290 V 3 phases 60 Hz 796-6000-60

380-480 V 3 phases 60 Hz 796-6000-61
550 V 3 phases 60 Hz 796-6000-65
600 V 3 phases 60Hz 796-6000-66

Accessories optional
8-1_97 Bit holder insert for retrac-bits 797-5503-30
Pneumatic bit-clamping device, complete 797-5510-40
Holder for reamer, 12° 797-5330-12
Technical data Cooling/Flushing tank unit, complete , 10 l 797-5488-75
Assembly tools for O-ring replacement 797-5452
Air pressure ..................................... Max. 13 bar/ Min. 6.5 bar Grinding gauge for button up to Ø 16 mm 795-1396
Air consumption ................................ 5-6 l/sec Grease gun 797-5870-20
Rated power (motor) .......................... 1.5 kW Grinding cups See page 115-116
Water pressure.................................. Max. 8 bar/ Min. 4 bar
Water consumption............................ 2-4 l/min *
Coolant/flushing medium ................... Water Service-exchange unit
Air connection, air hose ..................... 9.5 mm (3/8") ID Factory-reconditioned grinding head 797-5130-10
Water connection, water hose ............ 9.5 mm (3/8") ID
Dimensions: HxWxD mm ................... 990x670x795
Weight ............................................. 95 kg Recommen ded lubricants
Grease, 0.4 kg cartridge 797-5773-20
Gear oil, 1 liter 797-5870-10
* With cooling tank unit 0,2-0,3 l/min.

112
Grinding
Sanroc Micro

Part No.

Sanroc Micro
Intended for grinding all sizes and types of
threaded button bits and DTH-bits up to 254 mm.
Max. bit shank Ø 146 mm (5 3/4").

Pneumatic grinder without cooling unit 796-5700-10

(Sanbee grinding motor)

Pneumatic grinder with cooling unit 796-5701-10

(Sanbee grinding motor)

Accessories optional
Cooling/Flushing tank unit, complete 797-5488-60
Assembly tools for O-ring replacement 797-5452
Holder for reamer 12° 797-5330-12
Air pressure reducing valve (max.28/min.7 bar) 797-5910-28
Grinding gauge for button up to Ø 16 mm 795-1396
Grinding cups See page 115-116

Service-exchange unit
Factory-reconditioned Sanbee grinding motor 796-5110-15

8-1_82
Recommended lubricants
Grease, 0.4 kg cartridge 797-5773
Air tool oil, 1 litre 797-5870-90
Technical data

Pneumatic grinder
Air pressure ..................................... Max. 13 bar/ Min. 6 bar
Air consumption ................................ 60-85 l/sec
Spindle speed.................................... 19000 r.p.m.
Water consumption............................ 5-6 l/min
Dimensions: HxWxD mm ................... 705x335x370
Weight ............................................. 35 kg
Transport weight................................ 45 kg

113
Grinding
Sanroc Flexi

Part No.
Sanroc Flexi
Semi-automatic grinder, intended for grinding all
sizes and types of button bits, (DTH-bits up
to Ø 508 mm).

Complete one arm grinder with bit holders

Choice 1+4 796-5401-14
Choice 1+2 796-5401-12
Choice 1+3 796-5401-13
Choice 2+4 796-5401-24
Choice 2+2 796-5401-22
Choice 2+3 796-5401-23
Choice 3+3 796-5401-33

Complete two arms grinder with bit holders

Choice 1+4 796-5402-14
Choice 1+2 796-5402-12
Choice 1+3 796-5402-13
Choice 2+4 796-5402-24
Choice 2+2 796-5402-22
8-1_77 Choice 2+3 796-5402-23
Choice 3+ 3 796-5402-33
Technical data

Air pressure ...................................... Max. 13 bar/Min. 6 bar Accessories optional

Air consumption / arm ....................... 60-85 l/sec Holder for reamer 12° 797-5330-12
Water pressure, flushing .................... Max. 6 bar Tool for O-ring replacement 797-5452
Water consumption / arm................... 5-6 l/min Grinding gauge for button up to Ø 16 mm 795-1396
Sanbee grinding motor, speed............ 19000 r.p.m. Grinding cups See page 115-116
Dimensions:
Work - bench, HxWxD mm................. 2000 x 1650 x 1150
Weight/arm ....................................... 33 kg Service-exchange unit
Total weight....................................... 257 resp. 290 kg Factory-reconditioned Sanbee grinding motor 796-5110-05
Transport weight................................ 292 resp. 325 kg

Recommended lubricants
3 Grease, 0,4 kg cartridge 797-5773
1+4 Air tool oil, 1 litre 797-5870-90
2

8-1_79

Choice of bit holders

Bit holder for clamping treaded bits or retrac shirt max. Ø 100mm (4")
and DTH bits ranging from Ø35 to 254 mm. Max. shank Ø 100mm (4")

Left mounting: .................................. 1 Part No 797-8021

Right mouting: .................................. 4 Part No 797-8022

Bit holder for clamping 8 bits up to Ø 102 mm

Right and left mounting: .................... 2 Part No 797-8020

Bit holder for clamping of bits up to Ø 508 mm (20").

Max shank Ø 190 mm (7 1/2").

Right and left mounting: .................... 3 Part No 797-8023

114
Grinding
Grinding cups

For button size Part No.

Grinding cups for Sanbee and Sanroc Micro/Flexi/Mini/Multi grinders
Sancup Super, (white) 7 mm 797-5400-07
For redressing spherical buttons 8 mm 797-5400-08
9 mm 797-5400-09
10 mm 797-5400-10
11 mm 797-5400-11
12 mm 797-5400-12
8-1_56
13 mm 797-5400-13
Shank Ø 9 mm. 14 mm 797-5400-14
16 mm 797-5400-16
18 mm 797-5400-18

Sancup Super, (red) 7 mm 797-5295-07

For redressing semi-ballistic buttons 8 mm 797-5295-08
9 mm 797-5295-09
10 mm 797-5295-10
11 mm 797-5295-11
12 mm 797-5295-12
8-1_57
13 mm 797-5295-13
Shank Ø 11 mm. 14 mm 797-5295-14
16 mm 797-5295-16
18 mm 797-5295-18

Grinding cups for sancone grinders

Sancup Super, (blue)
For redressing spherical buttons
7 mm 797-5270-07
8 mm 797-5270-08
9 mm 797-5270-09
10 mm 797-5270-10
Shank Ø 9 mm.
11 mm 797-5270-11
12 mm 797-5270-12
13 mm 797-5270-13
14 mm 797-5270-14
16 mm 797-5270-16
Sancup Super, (green) 18 mm 797-5270-18
For redressing ballistic buttons

7-8 mm 797-5272-08
9 mm 797-5272-09
10 mm 797-5272-10
Shank Ø 9 mm.
11 mm 797-5272-11
12-13 mm 797-5272-12
14 mm 797-5272-14

115
Grinding
Grinding cups

For button size Part No.

Grinding cups for AC: LSD, CME: VS 200/ 220GTA, Jasco and others
Sancup (black)
For redressing spherical buttons

7-8-9 mm 797-5356-08
10 mm 797-5356-10

11 mm 797-5356-11
12-13 mm 797-5356-12
14 mm 797-5356-14
Shank Ø 8 mm. 16 mm 797-5356-16
* For older grinder remove O-ring before use (VS 200)

Sancup (black)
For redressing ballistic buttons

8-9 mm 797-5366-09
10 mm 797-5366-10

11 mm 797-5366-11
12-13 mm 797-5366-12
14 mm 797-5366-14
Shank Ø 8 mm. 16 mm 797-5366-16
* For older grinder remove O-ring before use (VS 200)

Grinding cups for all XL-types of grinders

Sancup XL, (white) 7 mm 797-5600-07
For redressing spherical buttons 8 mm 797-5600-08
9 mm 797-5600-09
10 mm 797-5600-10
11 mm 797-5600-11
12 mm 797-5600-12
8-1_XL
13 mm 797-5600-13
14 mm 797-5600-14
16 mm 797-5600-16
Sancup XL, (red) 18 mm 797-5600-18
For redressing semi-ballistic buttons
7 mm 797-5700-07
8 mm 797-5700-08
9 mm 797-5700-09
10 mm 797-5700-10
8-1_XLb 11 mm 797-5700-11
12 mm 797-5700-12
13 mm 797-5700-13
14 mm 797-5700-14
16 mm 797-5700-16
18 mm 797-5700-18

116
Grinding
Sanroc Cross/Cross D

Part No.

Sanroc Cross/Cross D
Sanroc Cross are intended for frontal grinding
of cross bits up to Ø 64 mm.

Grinder Sanroc Cross, with manuell 796-3200-XX 1)

bit holder.
Grinder Sanroc Cross, with pneumatic 796-3201-XX 1)
bit holder.

Sanroc Cross D are intended for frontal and

gauge grinding of cross bits up to Ø 64 mm.

Grinder Sanroc Cross D with right mounted 796-3231-XX 1)

frontal and left mounted semi-automatic
gauge grinding equipment.
1) Thelast two digits (XX) in the ordering code are used to specify the
electrical equipment, see table.

260 V 3 phases 50 Hz 796-32XX-51

380/420 V 3 phases 50 Hz 796-32XX-52
440 V 3 phases 50 Hz 796-32XX-55
550 V 3 phases 50 Hz 796-32XX-56
660 V 3 phases 50 Hz 796-32XX-57
500 V 3 phases 50 Hz 796-32XX-58
220-240 V 3 phases 50 Hz 796-32XX-59
8-1_99

220-290 V 3 phases 60 Hz 796-32XX-60

380-480 V 3 phases 60 Hz 796-32XX-61
Technical data Sanroc Cross Sanroc Cross D 550 V 3 phases 60 Hz 796-32XX-65
600 V 3 phases 60 Hz 796-32XX-66
Rated power............................... 1.7 KW 1.7 KW
Speed 50Hz ............................... 1400 r.p.m. 1400 r.p.m.
Speed 60Hz ............................... 1680 r.p.m. 1680 r.p.m. Accessories included in delivery
Water pressure........................... Max. 8 bar Max. 8 bar Grinding wheel dresser 796-1858
Min. 4 bar Min. 4 bar Protective goggles 797-5771
Dimensions: (HxWxD mm) .......... 1250x1120x1350 1250x1350x1350 Dressing template, cross bits 126° 797-6035-06
Weight ....................................... 190 kg 245 kg

Grinding units: Accessories optional

Rated power............................... 0,37 kW 0,37 kW Manual gauge-grinding unit 796-6050-50
Stroke frequency 50Hz ............... 140 strokes/min 140 strokes/min Semi-automatic gauge-grinding unit,
Stroke frequency 60Hz ............... 168 strokes/min 168 strokes/min (standard Cross D) 796-2960-XX
Timer for gauge-grinder, 60 sec. 797-6015-56
Semiautomatic gauge grinding unit (796-2960-XX): Pneumatic bit-holder without mandrel 797-6020
Rated power............................... – 0,45 kW Foot pedal 797-5730-13
Stroke frequency 50Hz ............... – 93 strokes/min Timer, 30 sec. 797-6015-60
Stroke frequency 60Hz ............... – 112 strokes/min Spare rollers for wheel dresser 796-1867
Speed 50Hz ............................... – 120 r.p.m. Dressing template, straight (Cross D) 797-6035-45
Speed 60Hz ............................... – 144 r.p.m. Grinding template See page 121
Weight ....................................... – 75 kg Grinding wheels See page 120/127
Mandrels See page 120/121
Grinding wheel dresser See page 121

Recommended lubricants
NOTE! Grinding wheels and Air tool oil, 1 litre 797-5870-90
mandrels are not included. Grease, 0.4 kg cartridge 797-5773

117
Grinding
Sanroc Cross Duo

Part No.
Sanroc Cross Duo
Twin-mounted frontal grinding machine.
Intended for frontal grinding of cross bits
up to Ø 64 mm.

Grinder Sanroc Cross Duo, with manual 796-3300-XX 1)

bit holder

Grinder Sanroc Cross Duo, with pneumatic 796-3301-XX 1)

bit holder
1) Thelast two digits (XX) in the ordering code are used to specify the
electrical equipment, see table.

260 V 3 phases 50 Hz 796-330X-51

380/420 V 3 phases 50 Hz 796-330X-52
440 V 3 phases 50 Hz 796-330X-55
550 V 3 phases 50 Hz 796-330X-56
660 V 3 phases 50 Hz 796-330X-57
500 V 3 phases 50 Hz 796-330X-58
220-240 V 3 phases 50 Hz 796-330X-59

220-290 V 3 phases 60 Hz 796-330X-60

380-480 V 3 phases 60 Hz 796-330X-61
550 V 3 phases 60 Hz 796-330X-65
600 V 3 phases 60 Hz 796-330X-66
8-1_100

Accessories included in delivery

Technical data Grinding wheel dresser 796-1858
Protective goggles 797-5771
Rated power............................... 1.7 KW Dressing template, cross bits 126° 797-6035-06
Speed 50Hz ............................... 1400 r.p.m.
Speed 60Hz ............................... 1680 r.p.m.
Water pressure........................... Max. 8 bar/ Min. 4 bar Accessories optional
Dimensions: (HxWxD mm) .......... 1250x1350x1350 Pneumatic bit-holder without mandrel 797-6020
Weight ....................................... 210 kg Foot pedal 797-5730-13
Timer, 30 sec. 797-6015-60
Grinding units: Spare rollers for wheel dresser 796-1867
Rated power............................... 2 x 0,37 kW Grinding template See page 121
Stroke frequency 50Hz ............... 140 strokes/min Grinding wheels See page 120/127
Stroke frequency 60Hz ............... 168 strokes/min Mandrels See page 120/121
Grinding wheel dresser See page 121

Recommended lubricants
NOTE! Grinding wheels and Air tool oil, 1 litre 797-5870-90
mandrels are not included. Grease, 0.4 kg cartridge 797-5773

118
Grinding
Sanroc X

Part No.
Sanroc X
Twin-mounted frontal grinding machine.
Intended for frontal grinding of X-bits
up to Ø 76 mm.

Grinder Sanroc X with manual bit holder 796-3600-XX 1)

Grinder Sanroc X with pneumatic bit holder 796-3601-XX 1)

1) Thelast two digits (XX) in the ordering code are used to specify the
electrical equipment, see table.

260 V 3 phases 50 Hz 796-360X-51

380/420 V 3 phases 50 Hz 796-360X-52
440 V 3 phases 50 Hz 796-360X-55
550 V 3 phases 50 Hz 796-360X-56
660 V 3 phases 50 Hz 796-360X-57
500 V 3 phases 50 Hz 796-360X-58
220-240 V 3 phases 50 Hz 796-360X-59

220-290 V 3 phases 60 Hz 796-360X-60

380-480 V 3 phases 60 Hz 796-360X-61
550 V 3 phases 60 Hz 796-360X-65
600 V 3 phases 60 Hz 796-360X-66

Accessories included in delivery

8-1_100
Grinding wheel dresser 796-1858
Protective goggles 797-5771
Technical data Dressing template, X-bits 75° 797-6035-07
Dressing template, X-bits 105° 797-6035-08
Rated power............................... 1.7 kW
Speed 50Hz ............................... 1400 r.p.m.
Speed 60Hz ............................... 1680 r.p.m. Accessories optional
Water pressure........................... max. 8 bar/ Min. 4 bar Pneumatic bit-holder without mandrel 797-6020
Dimensions (HxWxD mm) ........... 1250x1350x1350 Foot pedal 797-5730-13
Weight ....................................... 245 kg Timer, 30 sec. 797-6015-60
Spare rollers for wheel dresser 796-1867
Grinding units: Grinding template See page 121
Rated power............................... 2 x 0,37 kW Grinding wheels See page 120/127
Stroke frequency 50Hz ............... 140 strokes/min Mandrels See page 120/121
Stroke frequency 60Hz ................ 168 strokes/min Grinding wheel dresser See page 121

Recommended lubricants
Air tool oil, 1 litre 797-5870-90
Grease, 0.4 kg cartridge 797-5773
NOTE! Grinding wheels and
mandrels are not included.

119
Grinding
Accessories for Sanroc Cross M/MD, Sanroc Cross/D/Duo, Sanroc X

Bit insert Wheel

angle mm angle D W d Part No.

Grinding wheel, wet grinding

W 90° Cross bits 33-35 132° 300 23 32 797-1190-23
90° 38-41 132° 300 26 32 797-1190-26
90° 43-45 132° 300 29 32 797-1190-29
90° 48-51 132° 300 32 32 797-1190-32

75° X-bits 64 126° 300 35 32 797-1175-35

75° 76 126° 300 44 32 797-1175-44
105° 64 139° 300 48 32 797-1105-48
D d 105° 76 139° 300 58 32 797-1105-58

8-1_23
Straight wheel for gauge grinding 35-76 300 32 32 797-1100-32

Mandrel for manual bit holder, complete for Sanroc Cross/Cross Duo/Cross D and Sanroc X
For R22 (7/8") thread 797-6030-22
For R23 (29/32") thread 797-6030-23
For R25 (1") thread 797-6030-25
For R28 (1 1/8") thread 797-6030-28
8-1_101 For R32 (1 1/4") thread 797-6030-32
For R35 (1 3/8") thread 797-6030-35
For R38/T38 (1 1/2") thread 797-6030-38
For T45 (1 3/4") thread 797-6030-45

Pneumatic bit-holder, complete without mandrel for Sanroc Cross/Cross Duo/Cross D and Sanroc X
797-6020

8-1_99

120
Grinding
Accessories for Sanroc Cross M/MD, Sanroc Cross/D/Duo, Sanroc X

Part No.

Mandrel, complete for pneumatic bit holder, also for semi-automatic gauge-grinding unit
For R23 (29/32") thread 797-6020-23
For R25 (1") thread 797-6020-25
For R28 (1 1/8") thread 797-6020-28
8-1_103 For R32 (1 1/4") thread 797-6020-32
For R35 (1 3/8") thread 797-6020-35
For R38/T38 (1 1/2") thread 797-6020-38
For T45 (1 3/4") thread 797-6020-45

Wheel dresser
Wheel dresser, complete 796-1858
- Shaft (1 pcs) 1) 796-1862
- Bearing bushing (2 pcs) 1) 796-1863
- Screw (6 pcs) 1) 796-1865
8-1_37
- Cover (2 pcs) 1) 796-1866
- 1 set of dresser rollers 1) 796-1867

1) Included in a complete unit.

Grinding template, for Cross and X-bits

3 mm 2 mm 795-1343
Radius 80 mm
eel
Wh
eel

Max height of antitaper

Wh

Integrals
Bits

el

80 70 60 50 40 30 20 10 0
Whe

8-1_89 10
110°
Carbide
insert

121
Grinding
Sanroc ILP

Part No.
Sanroc ILP
Mobile, lightweight, pneumatic grinder.
Intended for frontal and gauge grinding of chisel
integral steels.

Complete grinder, air powered 796-5300

Accessories included in delivery

Grinding wheel for dry grinding 797-1227-15
Protective goggles 797-5771
T - hexagon wrench 797-5766-06

Accessories optional
Grinding wheels:
For dry grinding 797-1227-15
8-1_73
For wet grinding 797-1227-10
In line oiler 797-5747-50
Kit for grinding plug-hole drill steel steels 797-5489-50
Mounting bracket (for drill rig) 797-5330-91
Support for integral steels 797-5330-92
Grinding template for chisel bit 795-1343
Technical data Grinding template for plug-hole steels 795-1336

Air pressure ............................... Max 8 bar/ Min. 6 bar

Air consumption ......................... 40-60 l/sec Recommended lubricants
Rated power (motor) ................... 1.7 kW Air tool oil, 1 litre 797-5870-90
Idling speed................................ 4900 r.p.m. Grease, 0,4 kg cartridge 797-5773
Hose connections:
Air, air hose................................ 12.5 mm (1/2") ID
Air or water hose for cooling........ 9.5 mm (3/8") ID
Dimensions: HxWxD mm............. 660x550x350
Grinding wheel dimesions ........... 127x63x32 mm
Weight inclusive of grinding wheel 16.5 kg

Cutting-edge radius.................... 80 mm
Cutting-edge angle..................... 110°

W
8-1_80

D
D1 d D = 127 mm
W = 63 mm
d = 32 mm
D1 = 80 mm
w = 50 mm
w

Grinding wheel

122
Grinding
Sanroc ILH

Part No.
Sanroc ILH
Mobile, lightweight, hydraulic grinder.
Intended for frontal and gauge grinding of chisel
integral steel.

Complete grinder, hydraulic powered 796-5330

Accessories included in delivery

Grinding wheel for dry grinding 797-1227-15
Protective goggles 797-5771
T - hexagon wrench 797-5766-06

8-1_73C
Accessories optional
Grinding wheels:
For dry grinding 797-1227-15
For wet grinding 797-1221-10
Kit for grinding plug hole drill steels 797-5489-50
Mounting bracket (for drill rig) 797-5330-91
Support for integral steels 797-5330-92
Grinding template for chisel bit 795-1343
Grinding template for plug hole steels 795-1336

For Tamrock Commander:

Hydraulic mounting kit 797-5775-20

Technical data
Recommended lubricants
Hydraulic pressure...................... Max 200 bar/ Min. 140 bar Grease, 0,5 kg cartridge 797-8773
Oil flow consumption .................. 12 l/min
Air pressure ............................... Max 8 bar
Air consumption ......................... 5-10 l/sec
Rated power (motor) ................... 4 kW
Idling speed................................ 3700 r.p.m.
Hose connections:
Hydraulic, hydraulic hose ............ R 3/8" female thread
Air, air hose................................ 9.5 mm (3/8") ID
Water, water hose....................... 9.5 mm (3/8") ID
Dimensions: HxWxD mm............. 600x550x350
Grinding wheel dimensions.......... 127x63x32 mm

Cutting-edge radius.................... 80 mm
Cutting-edge angle..................... 110°

W
8-1_80

D
D1 d D = 127 mm
W = 63 mm
d = 32 mm
D1 = 80 mm
w = 50 mm
w

Grinding wheel

123
Grinding
Sanroc IP

Part No.
Sanroc IP
Pneumatic grinder intended for frontal and
gauge grinding of chisel integral steels.

Complete grinder 796-5050

Accessories included in delivery

Grinding wheel for dry grinding 797-1252-15
T - hexagon wrench 6 mm 797-5766-06
Protective goggles 797-5771

Accessories optional
Grinding wheels:
For dry grinding 797-1252-15
For wet grinding 797-1252-10
Inline oiler 797-5747-50
Support legs (Set 2 pcs) 797-5347
Grinding template for chisel bit 795-1343

Recommended lubricants
8-1_60 Air tool oil, 1 litre 797-5870-90

Technical data

Air pressure .................................... Max. 8 bar/ Min. 6 bar

Air consumption .............................. 20-45 l/sec
Idling speed: ................................... 4200 r.p.m.
Air motor......................................... 1.5 kW
Hose connetions:
Air, air hose..................................... 12.5 mm (1/2") ID
Water, water hose............................ 9.5 mm (3/8") ID
Weight inclusive of grinding wheel .... 38 kg

Cutting-edge radius......................... 80 mm
Cutting-edge angle.......................... 110°

W
8-1_80

D
D1 d D = 152 mm
W = 83 mm
d = 63.5 mm
D1 = 100 mm
w = 64 mm
w

Grinding wheel

124
Grinding
Sanroc IE

Part No.
Sanroc IE
Electric grinder intended for frontal and gauge
grinding of chisel integral steels.

Complete grinder (without water tray) 796-5012-XX1)

1) Thelast two digits (XX) in the ordering code are used to specify the
electrical equipment, see table.

220-240 V 1 phase 50 Hz 796-5012-50

260 V 3 phases 50 Hz 796-5012-51
380/420 V 3 phases 50 Hz 796-5012-52
440 V 3 phases 50 Hz 796-5012-55
8-1_61 550 V 3 phases 50 Hz 796-5012-56
660 V 3 phases 50 Hz 796-5012-57
500 V 3 phases 50 Hz 796-5012-58
Technical data 220-240 V 3 phases 50 Hz 796-5012-59

Air pressure .................................... Max 8 bar/ Min. 6 bar 220-290 V 3 phases 60 Hz 796-5012-60
Air consumption .............................. 20-45 l/sec 380-480 V 3 phases 60 Hz 796-5012-61
Idling speed..................................... 4200 r.p.m. 550 V 3 phases 60 Hz 796-5012-65
Air motor......................................... 1.5 kW 600 V 3 phases 60 Hz 796-5012-66
Hose connections:
Air, air hose..................................... 12.5 mm (1/2") ID
Water, water hose............................ 9.5 mm (3/8") ID Accessories included in delivery
Weight inclusive of grinding wheel .... 38 kg Grinding wheel for dry grinding 797-1252-15
T - hexagon wrench 6 mm 797-5766-06
Cutting-edge radius......................... 80 mm Protective goggles 797-5771
Cutting-edge angle.......................... 110°
Accessories optional
Grinding wheels:
W For dry grinding 797-1252-15
8-1_80 For wet grinding 797-1252-10
Water tray (plastic) 797-5346
Support legs (set 2 pcs) 797-5347
Grinding template for chisel bit 795-1343
D
D1 d D = 152 mm
W = 83 mm
d = 63.5 mm
D1 = 100 mm
w = 64 mm
w

Grinding wheel

125
Grinding
Sanroc IXP/IXH

Part No.
Sanroc IXP/IXH
Sanroc IXP/IXH are intended for frontal and
gauge grinding of integral steels vith 3 or 4
inserts and threaded or tapered bits.

Grinder Sanroc IXP, pneumatic powered 796-3800

Grinder Sanroc IXH, hydraulic powered 796-3830

Accessories included in delivery

Grinding wheel dresser 796-1858
T - hexagon wrench 797-5766-06
Protective goggles 797-5771
8-1_104
Pressing template for crossbit 797-6035-08

Accessories optional
Grinding wheel, dry, 132° 797-1185-28
Grinding wheel, dry, straight for gauge grinding 797-1101-32
Dressing template 4-inserts (cross bit) 797-6035-08
Technical data Sanroc IXP Sanroc IXH Dressing template 3-inserts 797-6035-23
Grinding template, cross bit 795-1343
Hydraulic pressure............................. – Max.200 bar Spare rollers for wheel dresser 796-1867
Min. 140 bar Mounting bracket (for drill rig) 797-5330-91
Oil flow consumption ......................... – 12 l/min
Air pressure ...................................... Max 8 bar – For Tamrock Commander:
Min. 6 bar Hydraulic mounting kit, IXH 797-5775-20
Air consumption ................................ 40-60 l/sec –
Rated power...................................... 1.7 KW 4.0 KW
Idling speed....................................... 3000 r.p.m. 3000 r.p.m. Recommended lubricants
Dimensions: Air tool oil (IXP), 1 litre 797-5870-90
Grinder (HxWxD mm)......................... 250x285x395 Grease (IXH), 0,4 kg cartridge 797-5773
250x240x395
Grinding wheel 132°, DxWxd mm....... 200x28x32 200x28x32
Grinding wheel straight, DxWxd mm ... 200x32x32 200x32x32
Weight .............................................. 20 kg 18 kg
Air hose ............................................ 12.5 mm (1/2") ID –
Hydraulic hose................................... – R 3/8"

NOTE! Grinding wheels and

mandrels are not included.

126
Grinding
Grinding wheels

D W d Part No.
Sanroc IXP/IXH (132°)
W For cross bits 33-43 mm Dry 200 28 32 797-1185-28
Straight wheel for gauge grinding Dry 200 32 32 797-1101-32

D d

8-1_81

D W d D1 w Part No.
Sanroc ILP, ILH, IP and IE
W ILP/ILH Dry 127 63 32 80 50 797-1227-15
8-1_24 ILP/ILH Wet 127 63 32 80 50 797-1227-10

IP/IE Dry 152 83 63.5 100 64 797-1252-15

IP/IE Wet 152 83 63.5 100 64 797-1252-10
D
D1 d

D W d D1 w Part No.

Secoroc: Junior and Senior, AC: Teroc 1500/1501

W Dry 203 102 32 150 80 797-1250-15
Wet 203 102 32 150 80 797-1250-10
8-1_24

D
D1 d

127