Dicentis Wireless Device
Dicentis Wireless Device
Dicentis Wireless Device
Microphones
• A socket is provided to connect the pluggable Region Certification
microphone (DCNM‑HDMIC, DCNM‑MICS or Europe CE
DCNM‑MICL, all to be ordered separately).
CE
Headphones and loudspeakers
• The Wireless Devices accommodate two headphone
Parts included
connections and controls (on the left and right-hand
side), so the speaker can be heard clearly even with
Quantity Components
excessive background noise.
1 DCNM-WD or DCNM-WDE Wireless Device
Battery maintenance
• Rechargeable Battery Pack (DCNM-WLIION).
• The lithium‑ion Battery Pack can be removed and Technical specifications
replaced in a matter of seconds, providing maximum Electrical
flexibility in recharge scheduling.
• Smart battery management via web interface control Supply voltage (battery 7.5 Vdc
(battery status and usage counting time). pack)
Controls and Indicators Power consumption 4W
• On top side:
– 4.3 inch capacitive display with touch screen Operating time DCNM-WD > 24 hours (20% speech, 80%
(DCNM-WDE only). listening)
– Microphone with a red or green indicator: Operating time DCNM-WDE > 20 hours (20% speech, 80%
- Red indicates microphone is active. listening)
- Green indicates request-to-speak accepted.
– LED indicators on device showing: Frequency response 100 Hz – 20 kHz)
- Microphone on state – Red. (-3 dB at nominal level)
- Possible‑to‑speak – White.
THD at nominal level < 0.1 %
- Priority – White (Chairperson only).
- Request‑to‑speak – Green. Dynamic range > 90 dB
• On the left and right hand side
– Headphone rotary volume controls. Signal‑to‑noise ratio > 90 dB
• On rear side: Headphone load impedance > 32 ohm <1k ohm
– Yellow out‑of‑range of Wireless Access Point LED
indicator. Headphone output power 15 mW
– Red battery low LED indicator.
• Under base side: Radio
– Recessed, so called ‘De‑init,’ switch to
disconnect the connected Wireless Device with WIFI standard IEEE 802.11n
the Wireless Access Point (DCNM-WAP). Frequency Range 2.4 GHz and 5 GHz (ISM license free)
Interconnections
• Socket for pluggable microphone. Audio inputs
• Two 3.5 mm (0.14 in) headphone sockets stereo jack
Nominal microphone input 80 dB SPL according IEC60914
type.
Maximum microphone input 110 dB SPL according IEC60914
Certifications and approvals
Audio outputs
EU CE
Loudspeaker nominal output 72 dB SPL at 0.5 m
US FCC
Loudspeaker maximum 80 dB SPL
CA ICES‑003 output
KR KC
3 | DICENTIS Wireless Devices
Color (top and base) Traffic black (RAL 9017) ACD-MFC-ISO 50/each
MIFARE Classic ID card with 1 kByte data storage, 2
Environmental application areas, one of which can be customized.
Packing information: 50 cards/ each unit
Operating temperature 5 ºC to +45 ºC
Order number ACD-MCF-ISO
(41 ºF to +113 ºF)
Represented by: