DS75491 MOS-to-LED Quad Segment Driver DS75492 MOS-to-LED Hex Digit Driver

February 1995

DS75491 MOS-to-LED Quad Segment Driver

DS75492 MOS-to-LED Hex Digit Driver
General Description Features
The DS75491 and DS75492 are interface circuits designed Y 50 mA source or sink capability per driver (DS75491)
to be used in conjunction with MOS integrated circuits and Y 250 mA sink capability per driver (DS75492)
common-cathode LEDs in serially addressed multi-digit dis- Y MOS compatability (low input current)
plays. The number of drivers required for this time-multi- Y Low standby power
plexed system is minimized as a result of the segment-ad- Y High-gain Darlington circuits
dress-and-digit-scan method of LED drive.

Schematic and Connection Diagrams

DS75491 (each driver) DS75492 (each driver)

TL/F/5830 – 1 TL/F/5830 – 2

DS75491 Dual-In-Line Package DS75492 Dual-In-Line Package

TL/F/5830 – 3 TL/F/5830 – 4
Top View Top View

Order Number DS75491N, DS75492M or DS75492N

See NS Package Number M14A or N14A

C1995 National Semiconductor Corporation TL/F/5830 RRD-B30M105/Printed in U. S. A.

 Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required, DS75491 DS75492
please contact the National Semiconductor Sales Continuous Total Dissipation 600 mW 600 mW
Office/Distributors for availability and specifications. Operating Temperature Range 0§ C to a 70§ C
DS75491 DS75492 Storage Temperature Range b 65§ C to a 150§ C
Input Voltage Range (Note 4) b 5V to VSS
Lead Temp. (Soldering, 10 sec) 300§ C 300§ C
Collector Output Voltage (Note 5) 10V 10V
Maximum Power Dissipation
Collector Output to Input Voltage 10V 10V at 25§ C
Emitter to Ground Voltage (VI t 5V) 10V Molded Package 1207 mW* 1280 mW ²
Emitter to Input Voltage 5V *Derate molded package 9.66 mW/§ C above 25§ C.
² Derate molded package 10.24 mW/§ C above 25§ C.
Voltage at VSS Terminal with Respect
to any Other Device Terminal 10V 10V
Collector Output Current
Each Collector Output 50 mA 250 mA
All Collector Outputs 200 mA 600 mA

Electrical Characteristics VSS e 10V (Notes 2 and 3)

Symbol Parameter Conditions Min Typ Max Units
DS75491
VCE ON ‘‘ON’’ State Collector Emitter Voltage Input e 8.5V through 1 kX, TA e 25§ C 0.9 1.2 V
VE e 5V, IC e 50 mA
TA e 0 –70§ C 1.5 V
IC OFF ‘‘OFF’’ State Collector Current VC e 10V, IIN e 40 mA 100 mA
VE e 0V
VIN e 0.7V 100 mA
II Input Current at Maximum Input Voltage VIN e 10V, VE e 0V, IC e 20 mA 2.2 3.3 mA
IE Emitter Reverse Current VIN e 0V, VE e 5V, IC e 0 mA 100 mA
ISS Current Into VSS Terminal 1 mA
DS75492
VOL Low Level Output Voltage Input e 6.5V through 1 kX, TA e 25§ C 0.9 1.2 V
IOUT e 250 mA
TA e 0 –70§ C 1.5 V
IOH High Level Output Current VOH e 10V IIN e 40 mA 200 mA
VIN e 0.5V 200 mA
II Input Current at Maximum Input Voltage VIN e 10V, IOL e 20 mA 2.2 3.3 mA
ISS Current Into VSS Terminal 1 mA

Switching Characteristics VSS e 7.5V, TA e 25§ C

Symbol Parameter Conditions Min Typ Max Units
DS75491
tPLH Propagation Delay Time, Low-to-High Level Output (Collector) VIH e 4.5V, VE e 0V, 100 ns
RL e 200X, CL e 15 pF
tPHL Propagation Delay Time, High-to-Low Level Output (Collector) 20 ns
DS75492
tPLH Propagation Delay Time, Low-to-High Level Output VIH e 7.5V, RL e 39X, 300 ns
tPHL Propagation Delay Time, High-to-Low Level Output CL e 15 pF 30 ns
Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. Except for ‘‘Operating Temperature Range’’
they are not meant to imply that the devices should be operated at these limits. The table of ‘‘Electrical Characteristics’’ provides conditions for actual device
operation.
Note 2: Unless otherwise specified min/max limits apply across the 0§ C to a 70§ C temperature range for the DS75491 and DS75492.
Note 3: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. All values shown
as max or min on absolute value basis.
Note 4: The input is the only device terminal which may be negative with respect to ground.
Note 5: Voltage values are with respect to network ground terminal unless otherwise noted.

2
AC Test Circuits and Switching Time Waveforms
DS75491 DS75492

TL/F/5830 – 5
TL/F/5830 – 6

Note 1: The pulse generator has the following characteristics: ZOUT e 50X, PRR e 100 kHz, tW e 1 ms. TL/F/5830 – 7

Note 2: CL includes probe and jig capacitance.

Physical Dimensions inches (millimeters)

14-Lead (0.150× Wide) Molded Small Outline Package, JEDEC

Order Number DS75492M
NS Package Number M14A

3
DS75491 MOS-to-LED Quad Segment Driver DS75492 MOS-to-LED Hex Digit Driver
Physical Dimensions inches (millimeters) (Continued)

Molded Dual-In-Line Package (N)

Order Number DS75491N or DS75492N
NS Package Number N14A

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor

Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (a49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: 1(800) 737-7018 English Tel: (a49) 0-180-532 78 32 Hong Kong
Fran3ais Tel: (a49) 0-180-532 93 58 Tel: (852) 2737-1600
Italiano Tel: (a49) 0-180-534 16 80 Fax: (852) 2736-9960

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
This datasheet has been downloaded from:

www.DatasheetCatalog.com

Datasheets for electronic components.

 National Semiconductor was acquired by Texas Instruments.
http://www.ti.com/corp/docs/investor_relations/pr_09_23_2011_national_semiconductor.html

This file is the datasheet for the following electronic components:

DS75492M - http://www.ti.com/product/ds75492m?HQS=TI-null-null-dscatalog-df-pf-null-wwe

DS75492N - http://www.ti.com/product/ds75492n?HQS=TI-null-null-dscatalog-df-pf-null-wwe

DS75491N - http://www.ti.com/product/ds75491n?HQS=TI-null-null-dscatalog-df-pf-null-wwe