6 5 4 3 2 1

1 2000 MAX CRS 2000 MAX CRS

150
A TOP HOOK
32NB/40NB 32NB/40NB

D SIDE MOUNT PLATFORM MOUNT IN GROUND

D
32NB/40NB 32NB/40NB STANDARD CLOSURE

457

1400
32NB/40NB 32NB/40NB

1017

560
3

25
C B B C
75

A
2 SECTION A-A

600
35

700
SQUARE OR CIRCULAR FORMWORK TO BE
ELEVATION VIEW USED AT TOP OF FOOTING. CONCRETE TO
SLOPE 25mm AWAY FROM POST
FORMWORK AS DIRECTED BY CLIENT

18 HOLES FOR:
4/M16x110 CAST IN-SITU NOTES:
GAL BOLTS OR
4/CHEMSET FASTENERS 1. CUSTOMER TO NOMINATE PREFFERED FOOTING / FIXING (IN GROUND, PLATFORM & SIDE MOUNT).
110 2. CUSTOMER TO NOMINATE PREFFERED RAIL SIZE - 32NB STANDARD SYSTEM OR 40NB HEAVY
SYSTEM.
B DETAIL 1 3. PROTECTION TREATMENT AND PAINT SYSTEMS TO BE IN ACCORDANCE WITH CLIENT B
REQUIREMENTS.
4. ALL POSTS TO BE 40NB (48.3 OD, 3.2 THICK) GALVANISED STEEL TUBE.
5. ALL HORIZONTAL RAILS TO BE ROLLED TO MATCH SHAPE OF PATH IF RADIUS IS LESS THAN 14m.
110

110
66

66
6. BARRIER DESIGNED TO MEET RECOMMENDATIONS FOR SHARED PATH BARRIER AS OUTLINED IN
40 MAX

AUSTROADS GUIDE TO ROAD DESIGN PART 6A - PATHS FOR WALKING AND CYCLING.
PACK VOID 7. STANDARD MONOWILLS LINK VELOCITY FULL BARRIER DESIGNED TO MEET BARRIER TYPE C3
WITH GROUT AS/NZS 1170.1:2002 (R2016)
8. ALL WELDS TO BE 4MM C.F.W. (CONTINUOUS FILLET WELDS) TO AS/NZS 1554.1.
LEVELING NUT 102 18 HOLES FOR: 9. PREFERRED COLD GALVANISING TREATMENT FOR IN-SITU WELDS, CUT ENDS OR OTHER BARE
66 STEEL TO BE IN ACCORDANCE WITH AS/NZS 4680:2006 CLAUSE 8 REPAIR PROCEDURE.
4/M16x110 CAST IN-SITU 10. ALL CONCRETE TO BE GRADE N25 OR AS CLIENT SPECIFIED.
146 GAL BOLTS OR 11. POSTS INSTALLED IN EXISTING BRIDGE/CULVERT CONCRETE TO BE GROUTED INTO 90mm HOLE
4/CHEMSET FASTENERS WITH 1:3 CEMENT MORTAR BY VOLUME AFTER THEY HAVE BEEN CAREFULLY ALIGNED.
12. THESE FENCES ARE INTENDED AS A PEDESTRIAN BARRIER AND ARE NOT TO BE USED IN
DETAIL 3 SITUATIONS WHERE MOTOR VEHICLES REQUIRE RESTRAINT.
125

SECTION B-B
50 MIN

1 DETAIL 3 ADDED, SECTION B-B FIXINGS REVISED 17/06/21 AJM

0 ISSUED FOR PUBLICATION 27/07/20 AJM
REV DESCRIPTION DATE DRAWN
A DRAWN AJM CLIENT A
CONCRETE DETAIL 2 DRAWN DATE 19AUG20
WEBFORGE
SHARED USE PRODUCT
MT
PATH PROJECTION APPROVED MONOWILLS LINK
APPROVED DATE 19AUG20 VELOCITY PARTIAL (3 RAIL)
DRAWING DISCLAIMER: DO NOT SCALE
WEBFORGE PROVIDES THE INFORMATION CONTAINED IN THIS DRAWING AS A GUIDE FOR YOUR INFORMATION ONLY. WEBFORGE HAS ASSEMBLY
TAKEN REASONABLE CARE TO ENSURE THE ACCURACY OF THE INFORMATION AT THE TIME OF PRODUCTION. WEBFORGE EXPRESSLY ALL
DISCLAIMS ALL LIABILITY WHATSOEVER FOR (INCLUDING ANY DIRECT OR INDIRECT LOSS OR DAMAGE, COSTS OR EXPENSES HOWSOEVER DRAWING NUMBER SHEET REV
INCURRED BY ANY PERSON) RELIANCE ON THE WHOLE OR ANY PART OF THE INFORMATION CONTAINED IN OR OMITTED FROM THIS DIMENSIONS
DRAWING. WEBFORGE RESERVES THE RIGHT TO MAKE TECHNICAL CHANGES WITHOUT NOTICE. IN mm U.N.O. LKVL-EX-002 1 OF 1 1
6 5 4 3 2 1
C:\Vault\Projects\Webforge\PROJECT DATA\W00000 - Standard Drawings\Drawings\LKVL-EX-002.dwg