www.fairchildsemi.

com

KA278R05
Low Dropout Voltage Regulator

Features Description
• 2A/5V Output Low Dropout Voltage Regulator The KA278R05 is a low-dropout voltage regulator suitable
• TO-220 Full-Mold Package (4Pin) for various electronic equipments. It provides constant
• Overcurrent Protection, Thermal Shutdown voltage power source with TO-220 4 lead full mold package.
• Overvoltage Protection, Short Circuit Protection The dropout voltage of KA278R05 is below 0.5V in full
• With Output Disable Function rated current(2A). This regulator has various functions such
as a peak current protection, a thermal shut down, an
overvoltage protection and an output disable function.
TO-220F-4L

1.Vin 2. Vo 3. GND 4. Vdis

Internal Block Diagram

Q1
Vin 1 2 Vo

OVERVOLTAGE
THERMAL SHUTDOWN PROTECTION

BANDGAP REFERENCE -
+
R1

SOA PROTECTION
HIGH / LOW OUTPUT
4 ON / OFF
Vdis -
+
R2
SHORT-CIRCUIT
SHORTCIRCUIT
1.4V
PROTECTION

3
GND

Rev. 1.0.2
©2002 Fairchild Semiconductor Corporation
KA278R05

Absolute Maximum Ratings

Parameter Symbol Value Unit Remark

Input Voltage Vin 35 V -
Disable Voltage Vdis 35 V -
Output Current Io 2.0 A -
Power Dissipation 1 Pd1 1.5 W No Heatsink
Power Dissipation 2 Pd2 15 W With Heatsink
Junction Temperature Tj 150 °C -
Operating Temperature Topr -20 ~ 80 °C -
Thermal Resistance, Junction-to Case (Note2) Rθjc 2.9 °C/W -
Thermal Resistance, Junction-to-Air (Note2) Rθja 48.51 °C/W -
Thermal Shutdown Temperature Ttsd 150 °C -

Electrical Characteristics
(Vin=7V, Io=1.0A, Ta=25°C , unless otherwise specified)

Parameter Symbol Conditions Min. Typ. Max. Unit

Output Voltage Vo - 4.88 5 5.12 V
Load Regulation Rload 5mA < Io < 2A - 0.1 2.0 %
Line Regulation Rline 6V < Vin < 12V - 0.5 2.5 %
Ripple Rejection Ratio RR note1 45 55 - dB
Dropout Voltage Vdrop Io = 2A - - 0.5 V
Disable Voltage High VdisH Output Active 2.0 - - V
Disable Voltage Low VdisL Output Disabled - - 0.8 V
Disable Bias Current High IdisH Vdis = 2.7V - - 20 µA
Disable Bias Current Low IdisL Vdis = 0.4V - - -0.4 mA
Quiescent Current Iq Io = 0A - - 10 mA

Note:
1.These parameters, although guaranteed, are not 100% tested in production.
2. Junction -to -case thermal resistance test environments.
-. Pneumatic heat sink fixture.
-. Clamping pressure 60psi through 12mm diameter cylinder.
-. Thermal grease applied between PKG and heat sink fixture

2
 KA278R05

Typical Performance Characteristics

7 50

Quiescent current Iq(mA)

6
Output voltage Vo(V)

40
5
RL= 8
30
4
RL=2.5Ω
3 20

2
10
1 RL=

0 0
0 5 10 15 0 5 10 15
Input voltage Vin (V) Input voltage Vin (V)

Figure 1. Output Voltage vs. Input Voltage Figure 2. Quiescent Current vs. Input Voltage

7 5.06

6 5.04
Output voltage Vo(V)

Output voltage Vo(V)

5 5.02

4 5.00

3 4.98

2 4.96

1 4.94

0 4.92
0 0.5 1 1.5 2 2.5 3 -25 0 25 50 75 100 125
Disable voltage Vdis (V) Temperature Tj(°C)
TEMPERATURE Tj(oC)

Figure 3. Output Voltage vs. Disable Voltage Figure 4. Output Voltage vs. Temperature(Tj)

0.6
Dropout voltage Vdrop(V)
Quiescent current Iq(mA)

8 0.5

0.4
6
Io=2A
0.3
4 1.5A
0.2
1.0A
2
0.1
0.5A
0 0
-25 0 25 50 75 100 125 -25 0 25 50 75 100 125
Junction temperature Tj(oC) Junction temperature Tj(oC)

Figure 5. Quiescent Current vs. Temperature(Tj) Figure 6. Dropout Voltage vs. Junction Temperature

3
KA278R05

Typical Performance Characteristics (Continued)

20

Relative output voltage(%)

Power dissipation PDD(W)

80
15
60

10 40

5 20

0
0 0 1.0 2.0 3.0 4.0 5.0 6.0
-25 0 25 50 75 100 125
TEMPERATURE
Temperature Ta(°C)
Ta(°C)
o Output Current(A)
TEMPERATURE Tj( C)

Figure 7. Power Dissipation vs. Temperature(Ta) Figure 8. Overcurrent Protection Characteristics

(Typical Value)

4
KA278R05

Typical Application

Vin Vo
1 2

+
3
GND

4
Vdis
Disable Signal

Figure 1. Application Circuit

• Ci is required if regulator is located an appreciable distance from power supply filter.

• Co improves stability and transient response.(Co > 47µF)

5
 KA278R05

Mechanical Dimensions
Package
Dimensions in millimeters

TO-220F-4L

6
 KA278R05

Mechanical Dimensions (Continued)

Package
Dimensions in millimeters

TO-220F-4L(Forming)

7
KA278R05

Ordering Information
Product Number Package Operating Temperature
KA278R05TU TO-220F-4L
-20°C to +80°C
KA278R05YDTU TO-220F-4L(Forming)

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, and (c) whose failure to reasonably expected to cause the failure of the life support
perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.

www.fairchildsemi.com

9/10/02 0.0m 001

Stock#DSxxxxxxxx
 2002 Fairchild Semiconductor Corporation
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.