ROUGH TERRAIN CRANE

GR-160N

JAPANESE SPECIFICATIONS

OUTLINE SPEC. NO.

X-type Outrigger GR-160N-2-00101

Control No. JA-01

 GR-160N-1-00101

GR-160N
1. Crane Specifications
◎ Crane Jib
Crane Capacity Single stage stored under boom
Offset 5°, 25°, 45° 3-stage inclined
  6.5 m boom 16,000 kg x 3.0 m (6-part line)
10.7 m boom 12,000 kg x 4.0 m (6-part line) Single Top
14.9 m boom   9,000 kg x 4.5 m (4-part line) Mounted and fixed on the top boom section.
19.1 m boom   7,000 kg x 5.5 m (4-part line) Hoist
23.3 m boom   5,000 kg x 6.0 m (4-part line) Hydraulic motor driven planetary gear reducer
27.5 m boom   3,500 kg x 7.0 m (4-part line) Automatic brake
  3.8 m jib   2,000 kg x 70° (single-part line) High-speed unwind function
Single top   3,200 kg (single-part line) 2 single winches
Max. Lifting Height With flow regulator valve with pressure compensation
Boom 28.2 m Boom Elevation
Jib 32.0 m Single double-acting hydraulic cylinder
Max. Working Radius With flow regulator valve with pressure compensation
Boom 24.0 m Swing
Jib 27.2 m Hydraulic motor driven planetary gear reducer
Boom Length Swing bearing
6.5 m to 27.5 m Swing free/lock changeover type
Boom Extension Negative brake
21.0 m Outriggers
Boom Extension Speed Fully hydraulic X-type (floats mounted integrally)
Slides and jacks each provided with independent operation
21.0 m/83 s
device.
Jib Length
Fully extended width 5.2 m
3.8 m
Middle extended width 4.8 m, 4.4 m, 3.2 m
Main Winch Single Line Winding Speed Minimum extended width 2.7 m
110 m/min (5 layers)
Operation Method
Main Winch Hook Speed Hydraulic pilot valve operation
27.5 m/min (4-part line)
Max. Vertical Load Capacity of Outrigger
Main Winch Single Line Unwinding Speed 18.4 t
<Reference>
Power Take-Off
Standard: 110 m/min (5 layers)
PTO wet multi-plate clutch
High-speed: 150 m/min (5 layers)
Hydraulic Pumps
Auxiliary Winch Single Line Winding Speed
2 variable piston pumps
96 m/min (3 layers)
2 gear pumps
Auxiliary Winch Hook Speed
Hydraulic Tank Capacity
96 m/min (single-part line)
295 L
Auxiliary Winch Single Line Unwinding Speed
Safety Devices
<Reference>
Automatic moment limiter (AML)
Standard:   96 m/min (3 layers)
Swing automatic stop device
High-speed: 130 m/min (3 layers)
Elevation slow down and stop device
Boom Elevation Angle Over-winding cutout device
-9° to 82.5° Working area control device
Boom Elevation Speed Outrigger extension width detector
-9° to 82.5°/34 s Level gauge
Swing Angle Hook safety latch
360° continuous Hydraulic safety valve
Swing Speed Telescoping cylinder check valve
2.6 min-1 (rpm) Extension cylinder check valve
Wire Rope Jack pilot check valve
Main winch Equipment
14 mm dia. x 155 m long Air-conditioner with dehumidifier
Spin-resistant wire rope Hydraulic oil temperature indication lamp
Auxiliary winch Radio
14 mm dia. x 70 m long Oil cooler
Spin-resistant wire rope Visual-type winch drum rotation indicator
Hook Operation pedals
16 t hook (6-part line) ISO arrangement: for telescoping/auxiliary hoisting
3.2 t hook (single-part line) Tadano arrangement: for elevating/telescoping
Boom Satellite communications equipment (HELLO-NET Owner's Site)
6-section hydraulically telescoping boom of box construction Ancilliary Equipment
(stages 2, 3: synchronized, stages 4, 5, 6: synchronized) Wood blocks (x 4)
Boom Extension Aluminum deck plates (x 4)
2 double-acting hydraulic cylinders
3 wire rope type telescoping devices
Flow regulator valve with pressure compensation

–  1  –
 GR-160N-1-00101

◎ Carrier ◎ Dimensions
Manufacturer and Model Overall length 8,310 mm
Tadano JDS-T006 Overall width 2,200 mm
Engine Overall height 3,150 mm
Model Cummins QSB6.7-3C (with turbo charger and air Wheel base 3,200 mm
cooler) Tread Front 1,820 mm
Type Water-cooled 4-cycle, in-line 6 cylinder, direct-injection Rear 1,820 mm
diesel
Piston displacement 6.690 L
Max. output 160 kw (218 PS)/2,500 min-1 (rpm) ◎ Weights
Max. torque 843 N.m (86.0 kgf.m)/1,500 min-1 (rpm) Gross vehicle weight 19,915 kg
Torque Converter Front   9,925 kg
3-element, 1-stage unit (with automatic lock-up mechanism) Rear   9,990 kg
Transmission
Automatic and manual transmission
Power shift type (wet multi-plate clutch) ◎ Performance
4 forward gears, 1 reverse gear (with Hi and Lo) Max. traveling speed 49 km/h
Reducer Gradeability (tanθ)   0.6
Axle dual-ratio reduction Min. turning radius   4.8 m (4-wheel steering)
Drive   8.5 m (2-wheel steering)
2-wheel drive (4 x 2)/4-wheel drive (4 x 4) selection
Front Axle
Full floating shaft tube type ◎ Optional Equipment
Rear Axle Electric mirror
Full floating shaft tube type Rear view monitoring camera
Suspension Loudspeaker
Front Parallel leaf spring type (with hydraulic lock cylinder) AML external warning lamp
Rear Parallel leaf spring type (with hydraulic lock cylinder) Roadside lamp
Steering Identification lamp
Fully hydraulic power steering Toolbox
Brake System
Service Brake
Air and hydraulic combined type front and rear disk brakes
Parking Brake
Air-type transmission braking and internal expanding-type
spring brake
Auxiliary Brake
Electro-pneumatic operated exhaust brake
Auxiliary braking device for operations
Frame
Welded box-shaped structure
Electric System
12 V/120 Ah x 2 (24 V)
Fuel Tank Capacity
250 L
Tires
Front 325/95R24 161E Road
Rear 325/95R24 161E Road
Cab
One-man type
With interior equipment
Rubber mounted type
Fully adjustable suspension seat
(with head rest, arm rest, seat belt)
Adjustable wheel (tilt, telescoping)
Intermittent windshield/roof wiper (with washer)
Power window
Side visor
Safety Devices
Emergency steering device
Suspension lock device
Rear wheel steering lock device
Engine over-run alarm
Overshift prevention device
Parking brake alarm
TV monitor on left side of boom
Equipment
Centralized oiling device (Electric type is optional)

–  2  –
 2. Total Rated Loads
2-(1) Outrigger Extension
[Boom]
Unit: ton Unit: ton
Outriggers fully extended (5.2 m) -360°- Outriggers middle extended (4.8 m) -Over sides-
Boom Boom
length length
6.5 m 10.7 m 14.9 m 19.1 m 23.3 m 27.5 m 6.5 m 10.7 m 14.9 m 19.1 m 23.3 m 27.5 m
Working Working
radius radius
  2.5 m 16.0 12.0 9.0 7.0   2.5 m 16.0 12.0 9.0 7.0
  3.0 m 16.0 12.0 9.0 7.0   3.0 m 16.0 12.0 9.0 7.0
  3.5 m 14.0 12.0 9.0 7.0 5.0 3.5   3.5 m 14.0 12.0 9.0 7.0 5.0 3.5
  4.0 m 12.5 12.0 9.0 7.0 5.0 3.5   4.0 m 12.5 12.0 9.0 7.0 5.0 3.5
  4.5 m 11.7 11.1 9.0 7.0 5.0 3.5   4.5 m 11.7 11.1 9.0 7.0 5.0 3.5
  5.0 m (4.4 m)   10.25 8.9 7.0 5.0 3.5   5.0 m (4.4 m)   10.25 8.9 7.0 5.0 3.5
  5.5 m   9.4 8.2 7.0 5.0 3.5   5.5 m   9.2 8.2 7.0 5.0 3.5
  6.0 m   8.8 7.6 6.6 5.0 3.5   6.0 m   7.9 7.6 6.6 5.0 3.5

–  3  –
  7.0 m    6.75 6.4 5.8 4.7 3.5   7.0 m    5.85   5.85 5.8 4.7 3.5
  8.0 m   5.3 5.0 5.2   4.15 3.4   8.0 m    4.55 4.5   4.85   4.15 3.4
  9.0 m   4.5 4.0 4.3 3.7 3.1   9.0 m   3.9   3.55 3.9 3.7 3.1
10.0 m (8.6 m)   3.25 3.5 3.3 2.8 10.0 m (8.6 m) 2.8   3.15 3.3 2.8
11.0 m   2.65   2.95 3.0   2.55 11.0 m   2.25 2.6 2.8   2.55
12.0 m   2.15   2.45   2.65   2.35 12.0 m 1.8   2.15   2.35   2.35
13.0 m 1.8   2.05   2.25   2.15 13.0 m 1.5   1.75   1.95 2.1
14.0 m (12.8 m)   1.75   1.95 2.0 14.0 m (12.8 m)   1.45   1.65   1.75
15.0 m   1.45 1.7   1.75 15.0 m 1.2 1.4 1.5
16.0 m   1.25   1.45 1.5 16.0 m 1.0 1.2 1.3
17.0 m   1.05   1.25 1.3 17.0 m   0.85 1.0 1.1
18.0 m   1.05 1.1 18.0 m   0.85   0.95
19.0 m 0.9   0.95 19.0 m 0.7 0.8
20.0 m   0.75 0.8 20.0 m   0.55   0.65
22.0 m 0.6 0.6 22.0 m   0.45
24.0 m (21.2 m)   0.45 A (°) 0-82.5 24-82.5
A (°) 0-82.5 A= Boom angle range (for the unladen condition)
GR-160N-1-00101

A= Boom angle range (for the unladen condition)

 [Boom]
Unit: ton Unit: ton
Outriggers middle extended (4.4 m) -Over sides- Outriggers middle extended (3.2 m) -Over sides-
Boom Boom
length length
6.5 m 10.7 m 14.9 m 19.1 m 23.3 m 27.5 m 6.5 m 10.7 m 14.9 m 19.1 m 23.3 m 27.5 m
Working Working
radius radius
  2.5 m 16.0 12.0 9.0 7.0   2.5 m 16.0 12.0 9.0 7.0
  3.0 m 16.0 12.0 9.0 7.0   3.0 m 14.5 12.0 9.0 7.0
  3.5 m 14.0 12.0 9.0 7.0 5.0 3.5   3.5 m 10.5 10.4 9.0 7.0 5.0 3.5
  4.0 m 12.5 12.0 9.0 7.0 5.0 3.5   4.0 m   8.0    8.25 7.9 7.0 5.0 3.5
  4.5 m 11.7 11.1 9.0 7.0 5.0 3.5   4.5 m   6.8   6.6 6.5 7.0 5.0 3.5
  5.0 m (4.4 m)   9.5 8.9 7.0 5.0 3.5   5.0 m (4.4 m)    5.45 5.4 5.8 5.0 3.5
  5.5 m   8.0 7.9 7.0 5.0 3.5   5.5 m   4.6 4.5 4.9 5.0 3.5
  6.0 m   6.8 6.7 6.6 5.0 3.5   6.0 m   3.9 3.9 4.2 4.4 3.5

–  4  –
  7.0 m    5.05 5.0   5.35 4.7 3.5   7.0 m   2.9   2.85   3.15 3.3 3.4
  8.0 m    3.85   3.85   4.15   4.15 3.4   8.0 m    2.15 2.1 2.4 2.6   2.75
  9.0 m   3.3 3.0 3.3   3.55 3.1   9.0 m   1.8   1.55   1.85   2.05 2.2
10.0 m (8.6 m)   2.35   2.65 2.9 2.8 10.0 m (8.6 m) 1.1   1.45   1.65 1.8
11.0 m   1.85   2.15 2.4 2.5 11.0 m   0.75 1.1 1.3   1.45
12.0 m   1.45   1.75 2.0 2.1 12.0 m 0.5 0.8 1.0   1.15
13.0 m   1.15   1.45   1.65 1.8 13.0 m   0.55 0.8 0.9
14.0 m (12.8 m)   1.15 1.4   1.55 14.0 m 0.4 0.6 0.7
15.0 m   0.95   1.15 1.3 15.0 m 0.4   0.55
16.0 m   0.75   0.95 1.1 A (°) 0-82.5 35-82.5 45-82.5 54-82.5
17.0 m 0.6 0.8 0.9 A= Boom angle range (for the unladen condition)
18.0 m   0.65   0.75
19.0 m 0.5 0.6
20.0 m 0.5
A (°) 0-82.5 32-82.5
A= Boom angle range (for the unladen condition)
GR-160N-1-00101
 [Boom]
Unit: ton
Outriggers minimum extended (2.7 m) -Over sides-
Boom
length 6.5 m 10.7 m 14.9 m 19.1 m 23.3 m 27.5 m
Working
radius
  2.5 m 13.5 12.0 9.0 7.0
  3.0 m 10.6 10.0 9.0 7.0
  3.5 m   8.0   7.8 7.7 7.0 5.0 3.5
  4.0 m   6.2   6.2 6.1 6.4 5.0 3.5
  4.5 m   5.3   5.0 4.9 5.3 5.0 3.5
  5.0 m (4.4 m)   4.1 4.0 4.4 4.5 3.5
  5.5 m   3.4 3.3 3.7   3.85 3.5
  6.0 m    2.85 2.8 3.1   3.35 3.4

–  5  –
  7.0 m    2.05   1.95 2.3 2.5 2.6
  8.0 m    1.45   1.35 1.7 1.9   2.05
  9.0 m    1.15 0.9   1.25   1.45 1.6
10.0 m (8.6 m)   0.55 0.9 1.1   1.25
11.0 m 0.6 0.8   0.95
12.0 m 0.4 0.6 0.7
A (°) 0-82.5 39-82.5 45-82.5 55-82.5 61-82.5
A= Boom angle range (for the unladen condition)
GR-160N-1-00101
 GR-160N-1-00101

[Jib (27.5 m Boom)]

Outriggers fully extended (5.2 m) -360°- Outriggers middle extended (4.8 m) -Over sides-

Jib length 27.5 m boom + 3.8 m jib Jib length 27.5 m boom + 3.8 m jib

Offset 5° 25° 45° Offset 5° 25° 45°

Total rated

Total rated

Total rated

Total rated

Total rated

Total rated
radius (m)

radius (m)

radius (m)

radius (m)

radius (m)

radius (m)
Working

Working

Working

Working

Working

Working
load (t)

load (t)

load (t)

load (t)

load (t)

load (t)
Boom angle Boom angle

  82.5°   3.6 2.0   4.7 1.5   5.7 1.25   82.5°   3.6 2.0   4.7 1.5   5.7 1.25
75°   8.0 2.0   8.9 1.5   9.6 1.25 75°   8.0 2.0   8.9 1.5   9.6 1.25
70° 10.8 2.0 11.6 1.5 12.1 1.25 70° 10.8 2.0 11.6 1.5 12.1 1.25
65° 13.2 1.6 14.0 1.35 14.5 1.25 65° 13.2 1.6 14.0 1.35 14.5 1.25
60° 15.5 1.35 16.3 1.2 16.7 1.15 60° 15.5 1.35 16.3 1.2 16.7 1.15
55° 17.7 1.1 18.4 1.1 18.8 1.05 55° 17.7 1.05 18.4 1.0 18.8 0.95
50° 19.7 0.95 20.4 0.9 20.7 0.9 50° 19.7 0.8 20.3 0.75 20.6 0.7
45° 21.6 0.75 22.2 0.7 22.4 0.7 45° 21.5 0.55 22.1 0.55 22.3 0.5
40° 23.3 0.6 23.8 0.55 40° 23.2 0.4 23.7 0.4
35° 24.8 0.45 25.2 0.4 35° 24.7 0.3 25.1 0.3
30° 26.1 0.35 26.4 0.3 A (°) 34-82.5 44-82.5
25° 27.2 0.25 A= Boom angle range (for the unladen condition)
A (°) 24-82.5 29-82.5 44-82.5
A= Boom angle range (for the unladen condition)

Outriggers middle extended (4.4 m) -Over sides- Outriggers middle extended (3.2 m) -Over sides-

Jib length 27.5 m boom + 3.8 m jib Jib length 27.5 m boom + 3.8 m jib

Offset 5° 25° 45° Offset 5° 25° 45°

Total rated

Total rated

Total rated

Total rated

Total rated

Total rated
radius (m)

radius (m)

radius (m)

radius (m)

radius (m)

radius (m)
Working

Working

Working

Working

Working

Working
load (t)

load (t)

load (t)

load (t)

load (t)

load (t)
Boom angle Boom angle

  82.5°   3.6 2.0   4.7 1.5   5.7 1.25   82.5°   3.6 2.0   4.7 1.5   5.7 1.25
75°   8.0 2.0   8.9 1.5   9.6 1.25 75°   8.0 2.0   8.9 1.5   9.6 1.25
70° 10.8 2.0 11.6 1.5 12.1 1.25 72° 9.5 1.65 10.5 1.45 11.1 1.25
65° 13.2 1.6 14.0 1.35 14.5 1.25 70° 10.5 1.4 11.5 1.3 12.1 1.15
60° 15.4 1.15 16.3 1.1 16.7 1.05 65° 12.9 0.9 13.8 0.85 14.3 0.75
55° 17.6 0.85 18.4 0.85 18.7 0.8 60° 15.2 0.55 16.0 0.55 16.4 0.45
50° 19.6 0.6 20.3 0.6 20.5 0.55 55° 17.3 0.3 18.1 0.3 18.4 0.25
45° 21.5 0.4 22.1 0.4 22.3 0.4 A (°) 54-82.5
40° 23.1 0.25 23.7 0.25 A= Boom angle range (for the unladen condition)
A (°) 39-82.5 44-82.5
A= Boom angle range (for the unladen condition)

–  6  –
 GR-160N-1-00101

[Jib (23.3 m Boom)]

Outriggers fully extended (5.2 m) -360°- Outriggers middle extended (4.8 m) -Over sides-

Jib length 23.3 m boom + 3.8 m jib Jib length 23.3 m boom + 3.8 m jib

Offset 5° 25° 45° Offset 5° 25° 45°

Total rated

Total rated

Total rated

Total rated

Total rated

Total rated
radius (m)

radius (m)

radius (m)

radius (m)

radius (m)

radius (m)
Working

Working

Working

Working

Working

Working
load (t)

load (t)

load (t)

load (t)

load (t)

load (t)
Boom angle Boom angle

  82.5°   2.9 2.0   4.0 1.5   5.0 1.25   82.5°   2.9 2.0   4.0 1.5   5.0 1.25
75°   6.5 2.0   7.5 1.5   8.3 1.25 75°   6.5 2.0   7.5 1.5   8.3 1.25
70°   8.8 2.0   9.7 1.5 10.5 1.25 70°   8.8 2.0   9.7 1.5 10.5 1.25
65° 11.0 2.0 11.8 1.5 12.5 1.25 65° 11.0 2.0 11.8 1.5 12.5 1.25
60° 13.1 1.7 13.9 1.45 14.4 1.2 60° 13.1 1.7 13.9 1.45 14.4 1.2
55° 15.1 1.5 15.9 1.4 16.1 1.15 55° 14.9 1.25 15.7 1.15 16.1 1.15
50° 16.9 1.15 17.5 1.1 17.6 1.05 50° 16.7 0.95 17.4 0.9 17.6 0.85
45° 18.5 0.9 19.0 0.85 19.1 0.85 45° 18.3 0.7 18.9 0.7 19.0 0.65
40° 19.9 0.7 20.4 0.7 40° 19.8 0.55 20.3 0.5
35° 21.2 0.55 21.6 0.55 35° 21.1 0.4 21.5 0.4
30° 22.4 0.45 22.6 0.45 30° 22.2 0.3 22.5 0.3
25° 23.3 0.4 23.4 0.35 25° 23.2 0.25 23.4 0.25
20° 24.0 0.35 A (°) 24-82.5 44-82.5
15° 24.5 0.3 A= Boom angle range (for the unladen condition)
10° 24.9 0.25
  5° 25.0 0.25
A (°) 4-82.5 24-82.5 44-82.5
A= Boom angle range (for the unladen condition)

Outriggers middle extended (4.4 m) -Over sides- Outriggers middle extended (3.2 m) -Over sides-

Jib length 23.3 m boom + 3.8 m jib Jib length 23.3 m boom + 3.8 m jib

Offset 5° 25° 45° Offset 5° 25° 45°

Total rated

Total rated

Total rated

Total rated

Total rated

Total rated
radius (m)

radius (m)

radius (m)

radius (m)

radius (m)

radius (m)
Working

Working

Working

Working

Working

Working
load (t)

load (t)

load (t)

load (t)

load (t)

load (t)

Boom angle Boom angle

  82.5°   2.9 2.0   4.0 1.5   5.0 1.25   82.5°   2.9 2.0   4.0 1.5   5.0 1.25
75°   6.5 2.0   7.5 1.5   8.3 1.25 75°   6.5 2.0   7.5 1.5   8.3 1.25
70°   8.8 2.0   9.7 1.5 10.5 1.25 72°   7.8 2.0   8.8 1.5   9.6 1.25
65° 11.0 2.0 11.8 1.5 12.5 1.25 70°   8.7 1.65   9.7 1.4 10.5 1.25
60° 12.9 1.4 13.9 1.3 14.4 1.2 65° 10.8 1.0 11.8 0.9 12.5 0.85
55° 14.8 1.0 15.6 0.95 16.0 0.9 60° 12.8 0.6 13.8 0.55 14.2 0.5
50° 16.6 0.7 17.3 0.7 17.6 0.65 55° 14.8 0.3 15.5 0.3 15.9 0.3
45° 18.3 0.5 18.8 0.5 19.0 0.5 A (°) 54-82.5
40° 19.7 0.35 20.2 0.35 A= Boom angle range (for the unladen condition)
35° 21.1 0.25 21.4 0.25
A (°) 34-82.5 44-82.5
A= Boom angle range (for the unladen condition)

–  7  –
 GR-160N-1-00101

PRECAUTIONS TO BE TAKEN WHEN THE OUTRIGGERS ARE EXTENDED:

1. The total rated loads shown are for the case where the crane is set horizontally on firm level ground. They
include the weights of the slings and main winch hook (140 kg) when using the boom, and the weights of the
slings and auxiliary winch hook (60 kg) when using the jib. The values above the bold lines are based on the
crane strength while those below are based on the crane stability.
2. Since the working radii are based on the actual values including the deflection of the boom, operations should be
performed in accordance with the working radii.
3. The total rated load for the jib differs for boom lengths of 23.3 m or less and more than 23.3 m.
4. Use the boom angle as a reference when using the jib. The working radii are reference values for the case
where a jib is mounted to a 23.3 m or a 27.5 m boom.
5. The total rated load for the single top is obtained by subtracting 80 kg from total rated load of the boom. It
includes the weight of the sling and auxiliary hook (60 kg), and must not exceed 3.2 t.
6. High-speed unwind should be performed only when lowering the hook alone, and sudden braking operations
must be avoided.
7. The table below shows the standard number of part lines for each boom length.
When using with other than this number of part lines, the load per line should not exceed 2.9 t for the main
winch, and 3.2 t for the auxiliary winch.

Boom length 6.5 m 10.7 m 14.9 m 19.1 m 23.3 m 27.5 m Jib/Single top
Number of part lines 6 6 4 4 4 4 1

8. A single-part line is used for the hook on the jib.

9. The hoisting performance for the "Over sides" range will differ according to the extended width of the outriggers.
Operations should be performed in accordance with the performance corresponding to the extended width.
Also, although the hoisting performances for the "Over front" and "Over rear" ranges are equivalent to those of
the outriggers fully extended condition, the front and rear ranges (angle a) will differ according to the width to
which the outriggers are extended in the left and right directions.

Middle extended Middle extended Middle extended Minimum extended

Extended width (4.8 m) (4.4 m) (3.2 m) (2.7 m)

Angle a° 50 45 20 15
(Angle a° in the chart shows the minimum value)

–  8  –
 GR-160N-1-00101

2-(2) Outrigger Not Used

Unit: ton
Stationary
Working 6.5 m boom 10.7 m boom 14.9 m boom 19.1 m boom
radius
Front 360° Front 360° Front 360° Front 360°
  3.0 m 8.0 4.4 7.5 4.5 5.2 4.65 5.0 4.7
  3.5 m 7.7 3.5 7.5 3.65 5.2 3.7 5.0 4.0
  4.0 m 7.3 2.8 7.3 3.0 5.2 3.0 5.0 3.25
  4.5 m 6.6 2.2 6.4 2.4 4.75 2.35 4.55 2.6
  5.0 m (4.4 m) (4.4 m) 5.45 1.9 4.25 1.8 4.1 2.1
  5.5 m 4.6 1.5 3.8 1.4 3.7 1.7
  6.0 m 3.9 1.15 3.45 1.05 3.4 1.35
  7.0 m 2.95 0.6 2.6 0.5 2.8 0.85
  8.0 m 2.25 1.9 2.25 0.45
  9.0 m 1.4 1.8
10.0 m 1.05 1.4
11.0 m 0.75 1.05
12.0 m 0.5 0.8
13.0 m 0.6
14.0 m 0.4
A (°) 0-82.5 25-82.5 0-82.5 51-82.5 35-82.5 60-82.5
A= Boom angle range (for the unladen condition)

Unit: ton
Vehicle moving (at 1.6 km/h or less)
Working 6.5 m boom 10.7 m boom 14.9 m boom 19.1 m boom
radius
Front 360° Front 360° Front 360° Front 360°
  3.0 m 6.7 3.7 6.3 3.8 4.3 3.8 4.1 3.9
  3.5 m 6.5   2.95 6.3 3.0 4.3 3.1 4.1 3.35
  4.0 m 6.1   2.35 6.0 2.45 4.3 2.5 4.1 2.7
  4.5 m 5.5   1.85 5.4 2.0 3.9 2.0 3.75 2.15
  5.0 m (4.4 m) (4.4 m) 4.5 1.6 3.5 1.55 3.35 1.7
  5.5 m 3.8 1.25 3.2 1.15 3.0 1.35
  6.0 m 3.25 0.95 2.95 0.85 2.8 1.1
  7.0 m 2.45 0.45 2.15 0.4 2.45 0.7
  8.0 m 1.8 1.6 1.9
  9.0 m 1.2 1.45
10.0 m 0.85 1.1
11.0 m 0.6 0.85
12.0 m 0.35 0.6
13.0 m 0.4
A (°) 0-82.5 36-82.5 0-82.5 55-82.5 40-82.5 64-82.5
A= Boom angle range (for the unladen condition)

–  9  –
 GR-160N-1-00101

PRECAUTIONS TO BE TAKEN WHEN THE OUTRIGGERS ARE NOT USED:

1. The total rated loads shown are for the case where the tire pressure on firm level ground is as specified (900 kPa
(9.00 kgf/cm2)) and the crane is completely spring-locked. They include the weights of the sling and main hook
(140 kg) when using the boom.
The values above the bold lines are based on the crane strength while those below are based on the crane
stability. The foundation, working conditions etc. should be taken into consideration for actual work.
2. Since the working radii are based on the actual values including the deflection of the boom and the tires,
operations should be performed in accordance with the working radii.
3. The table below shows the standard number of part lines for each boom length. When using with other than
this number of part lines, the load per line should not exceed 2.9 t for the main winch, and 3.2 t for the auxiliary
winch.

Boom length 6.5 m 10.7 m 14.9 m 19.1 m Single top

Number of part lines 4 4 4 4 1

4. "Over front" crane operations should be performed only when the AML "over-front area indicator lamp" is lit.
The boom must be kept inside a 2° area over front of the carrier when performing "Over front" crane operations
without the outriggers.
.
rox
app

5. The total rated load for the single top is obtained by subtracting 80 kg from total rated load of the boom. It
includes the weight of the sling and auxiliary hook (60 kg), and must not exceed 3.2 t.
6. High-speed unwind function should not be performed without outriggers. Booms over 19.1 m in length and jibs
should not be used without outriggers.
7. The "Drive Mode Selection" switch should be set to "4-wheel / Lo" for travelling while hoisting a load and the shift
lever should be set to first.
8. When travelling while hoisting a load, the swing brake should be applied, the load should be kept as close to the
ground as possible but not touching the ground and the speed should be kept at 1.6 km/h or less. In particular,
any abrupt steering, starting or braking must be avoided.
9. Crane operations should not be performed when travelling while hoisting a load.

–  10  –
 GR-160N-1-00101

3. Working Radius - Lifting Height

bo
om

jib

Lifting height (m)

bo
om
bo
om
bo
om
bo
om
bo
om

Working radius (m)

Note:
1. The deflection of the boom and jib is not incorporated in the figure above.
2. The figure above shows the crane with the maximum outrigger extension (5.2 m).

–  11  –
 4. Dimensions

(Total width) 2200

MIN. 2700
MAX. 5200
–  12  –

(Distance between axes) 1820

(Total width) 3150

GR-160N-1-00101
(Distance between axes) 1820 (Wheelbase) 3200
(Total width) 8310