Tubacex 10

T.T.I. - Tubacex Tubos Inoxidables, S.A.
Registro Mercantil de Alava, Tomo 587, Folio 189, Hoja VI 2855 - N.I.F. A-01140227
Number: 725118 Rev: 0
MILL TEST CERTIFICATE Page: 1 / 1
EN 10204 3.1
Date : 20.06.2019 20.06.2019
TUBACEX
CUSTOMER : INTERNATIONAL STEEL CORPORATION PO : 2839 ISC-4612 OUR REFERENCE : L4920
STANDARD : ASTM A 312 / ASME SA 312 ED. 2015
ADDIT. SPECS : NACE MR0175-15/MR0103-15/ISO 15156-15
GRADE : TP 316/316L
DIMENSION : 1/2” NB X SCH 40
MATERIAL : SEAMLESS STAINLESS STEEL PIPE
HOT ROLLED; PICKLED-PASSIVATED;
PLAIN ENDS SQUARE CUT;
---- I T E M---- -HEAT- NO. OF ---WEIGHT-- -TOTAL LENGTH-

YOUR TTI. NO. PIECES KG. M --UNIT LENGTH--
84 196 87356 455 3470.00 2730.00 5.0 - 7.0 MT
RAW MATERIAL
MELTING PROCESS : ELECTRIC FURNACE + A. O. D. FROM : ACERALAVA
PEELED BARS; MACROETCH TESTING : GOOD;
HEAT NO. C Mn Si P S Ni Cr Mo
Min. 0,000 0,000 0,000 0,000 0.000 10,00 16,00 2,00
Max. 0,030 2,000 1,000 0,045 0.030 14,00 18,00 3,00
87356 0,022 1,180 0,426 0,027 0,008 10,90 16,95 2,17
(1) L: LADLE; C: PRODUCT
HEAT TREATMENT
SOLUTION ANNEALED 1040 o C G.C. RAPIDLY COOLED BY AIR
= TESTS = -------------------TENSILE-------------------I M P A C T T E S T S--HARDNESS

HEAT NO. TEST TEMP. ------- MPA ------- -- % % MINIMUM AVERAGE
UTS Y.S. ELONGATION Z TEMP. Charpy-(J) (HBN)
(GL=50mm)
87356 568 288 46 46 O C 211 213
TECHNOLOGICALS - METALLURGICAL
BEND TEST : GOOD
FLARING TEST : GOOD
NON DESTRUCTIVE TEST

NACE MR 0103 / 0175 : SATISFACTORY
100% HYDROSTATIC PRESSURE TESTED AT 2500 PSI; DURING 10 SEC. GOOD
STEEL GRADE CHECKED ON EACH PIPE BY SPECTROGRAPHY
DIMENSIONAL CHECKING ON EACH PIPE, SATISFACTORY
VISUAL INSPECTION ON EACH PIPE, SATISFACTORY
CORROSION TEST : ASTM A 923 / C : SATISFACTORY
PMI 100% OK
MARKS
TUBACEX ASTM A 312 TP 316/316L SEAMLESS 1/2” NB X SCH 40 HEAT NO. 87356 PMI
REMARKS
- GOODS ARE BEING IMPORTED UNDER OGL AS PER EXPORT-IMPORT POLICY
1997-2002 AND DOES NOT COME UNDER NEGATIVE LIST/CANALISED LIST.
we hereby certify that the material herein described has been

manufactured, sampled, tested and inspected in accordance with T.T.I.
above standards and specifications and satisfies the order's Tubacex Tubos Inoxidables, S. A.
requirements.
This certificate is issued by a computerized system and it is valid INGENIERIA DE CALIDAD
without signature. On the original certificate the responsible's
signature red coloured is stamped.
In case the owner of the original certificate would release a
copy of it, he must attest its conformity to the original one,
taking upon himself the responsibility for any unlawful or not Jon Altuna Zubero
allowed use.
T.T.I. - Tubacex Tubos Inoxidables, S.A.
Registro Mercantil de Alava, Tomo 587, Folio 189, Hoja VI 2855 - N.I.F. A-01140227
Number: 791482 Rev: 0
MILL TEST CERTIFICATE Page: 1 / 1
EN 10204 3.1
Date : 24.07.2019 24.07.2019
TUBACEX
CUSTOMER : INTERNATIONAL STEEL CORPORATION PO : 3789 ISC-3612 OUR REFERENCE : L3912
STANDARD : ASTM A 312 / ASME SA 312 ED. 2015
ADDIT. SPECS : NACE MR0175-15/MR0103-15/ISO 15156-15
GRADE : TP 316/316L
DIMENSION : 1” NB X SCH 40
MATERIAL : SEAMLESS STAINLESS STEEL PIPE
HOT ROLLED; PICKLED-PASSIVATED;
PLAIN ENDS SQUARE CUT;
---- I T E M---- -HEAT- NO. OF ---WEIGHT-- -TOTAL LENGTH-

YOUR TTI. NO. PIECES KG. M --UNIT LENGTH--
291 619 89347 265 3975.00 1590.00 5.0 - 7.0 MT
RAW MATERIAL
MELTING PROCESS : ELECTRIC FURNACE + A. O. D. FROM : ACERALAVA
PEELED BARS; MACROETCH TESTING : GOOD;
HEAT NO. C Mn Si P S Ni Cr Mo
Min. 0,000 0,000 0,000 0,000 0.000 10,000 16,000 2,000
Max. 0,030 2,000 1,000 0,045 0.030 14,000 18,000 3,000
89347 0,021 1,320 0,410 0,012 0,007 11,710 16,720 2,120
(1) L: LADLE; C: PRODUCT
HEAT TREATMENT
SOLUTION ANNEALED 1060 D.C. RAPIDLY COOLED
= TESTS = -------------------TENSILE-------------------I M P A C T T E S T S--HARDNESS

HEAT NO. TEST TEMP. ------- MPA ------- -- % %
UTS Y.S. ELONGATION A Z TEMP. MINIMUM AVERAGE HRB
89347 578 569 287 47.40 48.16 73
TECHNOLOGICALS - METALLURGICAL
BEND TEST : GOOD
FLARING TEST : GOOD
NON DESTRUCTIVE TEST

100% HYDROSTATIC PRESSURE TESTED AT 2500 PSI; DURING 10 SEC. GOOD
STEEL GRADE CHECKED ON EACH PIPE BY SPECTROGRAPHY
DIMENSIONAL CHECKING ON EACH PIPE, SATISFACTORY
VISUAL INSPECTION ON EACH PIPE, SATISFACTORY
CORROSION TEST : ASTM A 262 / E : SATISFACTORY
MARKS
TUBACEX ASTM A 312 TP 316/316L SEAMLESS 1” NB X SCH 40 HEAT NO. 89347 PMI
REMARKS
- GOODS ARE BEING IMPORTED UNDER OGL AS PER EXPORT-IMPORT POLICY
1997-2002 AND DOES NOT COME UNDER NEGATIVE LIST/CANALISED LIST.
we hereby certify that the material herein described has been

manufactured, sampled, tested and inspected in accordance with T.T.I.
above standards and specifications and satisfies the order's Tubacex Tubos Inoxidables, S. A.
requirements.
This certificate is issued by a computerized system and it is valid INGENIERIA DE CALIDAD
without signature. On the original certificate the responsible's
signature red coloured is stamped.
In case the owner of the original certificate would release a
copy of it, he must attest its conformity to the original one,
taking upon himself the responsibility for any unlawful or not Jon Altuna Zubero
allowed use.

Tubacex 10

Uploaded by

Copyright:

Available Formats

Tubacex 10

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tubacex 10

Uploaded by

Copyright:

Available Formats

T.T.I. - Tubacex Tubos Inoxidables, S.A.

---- I T E M---- -HEAT- NO. OF ---WEIGHT-- -TOTAL LENGTH-

= TESTS = -------------------TENSILE-------------------I M P A C T T E S T S--HARDNESS

87356 568 288 46 46 O C 211 213

NON DESTRUCTIVE TEST

we hereby certify that the material herein described has been

---- I T E M---- -HEAT- NO. OF ---WEIGHT-- -TOTAL LENGTH-

= TESTS = -------------------TENSILE-------------------I M P A C T T E S T S--HARDNESS

89347 578 569 287 47.40 48.16 73

NON DESTRUCTIVE TEST

we hereby certify that the material herein described has been

You might also like