Baker Oil Tools Unit No.

3415 Date: November 19, 2003

Rev. A Page: 1 of 15
FLOW CONTROL SYSTEMS Locking Systems
TECHNICAL UNIT
Equalizing Check Valves
“FWV”, “RZV”, “FB-2”, “RB-2”
Product Family Nos. H80903, H80904, H80935 and H80936

Description built-in method of allowing equalizing before pull-

ing.
Baker provides two types of Equalizing Check
Valves. They are sometimes called “Standing “FB-2”and “RB-2”
Valves” because they prevent fluid flow in one di- Equalizing Check Valves
rection (downward) while allowing full fluid flow in These valves are complete units (not flow con-
the opposite direction (upward). Both types have a trol bottoms) used to run and land in “F” and “R”
built-in method of allowing equalizing before pull- Nipples, respectively. The “FB-2” seats on the Top
ing. NoGo shoulder of an “F” Nipple, and the “RB-2”
“FB-2”and “RB-2” Valve seats on the Bottom NoGo shoulder of an
Equalizing Check Valves “R” Nipple. Both NoGo shoulders prevent down-
These valves are complete units (not flow con- ward movement, but are not locked into the nipple
trol bottoms) used to run and land in “F” and “R” to prevent upward movement.
Nipples, respectively. The “FB-2” seats on the Top “V” Equalizing Check Valve
NoGo shoulder of an “F” Nipple, and the “RB-2” The “V” Valve differs from the “B-2” Valve in
Description that it is locked into the nipple or sleeve. It cannot
Baker provides two types of Equalizing Check be run with an “S” type lock because the ball can-
Valves. They are sometimes called “Standing not be held off the seat during running and landing.
Valves” because they prevent fluid flow in one di- (The ball and seat design would prevent the up-
rection (downward) while allowing full fluid flow in ward movement required when landing with an “S”
the opposite direction (upward). Both types have a lock.)

This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document
is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to
know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in
conjunction with equipment or product. © 11/19/03 Baker Hughes Incorporated.
Unit No. 3415 11-19-03 Equalizing Check Valves
Rev. A Page 2 of 15

WARNING
Use of Baker equipment contrary to
manufacturer’s specification may result in
property damage, serious injury or fatality.

Selection and Availability Chart

Product Size
Description Family
1.18 1.25 1.43 1.50 1.56 1.62 1.78 1.81 1.87 2.06 2.18 2.25 2.31 2.56 2.75 2.81
No.
Model “FWV” 809-03 x - x x x - x x x - - x x - x -
Model “FB-2” 809-35 x x x x x x x x x x x x x x x x
Model “RZV” 809-04 x - x - x - x x - - - x - - x -
Model “RB-2” 809-36 - - x x x - x x x x - x x x x x

(Continued)
Product Size
Description Family
3.12 3.25 3.31 3.68 3.75 3.81 4.00 4.12 4.31 4.56 4.75 5.25 5.50 5.75 5.81 5.95 6.125
No.
Model “FWV” 809-03 - - - - - - - - - - - - - - - - -
Model “FB-2” 809-35 x x x x x x x x x x x x x x - - x
Model “RZV” 809-04 - - - - - - - - - - - - - - - - -
Model “RB-2” 809-36 x x x x x x x - x x x x - x x x

Specification Guide, “RB-2” and “FB-2”

Type and Size Standard Tools+
To Run To Pull
“RB-2” Equalizing “FB-2” Equalizing
Baker “C-1” CAMCO OTIS CAMCO OTIS
Check Valve Check Valve
Running Tool
Product Family No. Product Family No.
Product Family No. JDC SB SM JDC JUC RB SB SM
H80938 H80935
H81106
- 1.18 and 1.25 1.660 - 1-3/16 - 1-3/16
1.43,1.50 and 1.56 1.43,1.50,1.56 and 1.62 1.900-2-1/16 1-1/2 1-1/2 1-1/2 1-1/2
1.78, 1.81 and 1.87,
1.78,1.81 and 1.87 2-3/8 2 2 2 2
2.06 and 2.18
2.25, 2.31 and 2.56 2.25, 2.31 and 2.56 2-7/8 2-1/2 2-1/2 2-1/2 2-1/2
2.75, 2.81, 2.75, 2.81, 3.12,
3-1/2 3 3 3 3
3.12 and 3.31 3.31 and 3.25
3.68, 3.75 and 3.81 3.68, 3.81 and 3.75
4.00 4.00
- 4.12
4.31 4.31
4-1/2* 4 4 4 4
4.56 4.56
4.75 4.75
5.25 5.25
5.75, 5.81 and 5.95 5.50, 5.75 and 6.12
*The 4-1/2" “C-1” Running Tool can be pinned to the fishing neck of the check valves only through the lower shear pin holes of
the Running Tool.
+For complete operating instructions on the above running and pulling tools, refer to other Flow Control Systems Tech Units.
Equalizing Check Valves Unit No. 3415 11-19-03
Rev. A Page 3 of 15

“V” Equalizing Check Valve On Non-selective (“W” and “Z” Type) Locks
Assembly and Dimensional Data Drawing No. 333-940

Dimensional Data, 1.18 - 2.75

Refer to Drawing No. 333-940.
Max OD Locks
Size A B C D E F
“Z” “W”
1.18 1.187 1.240 .438 1.177 1.094 8.28 10.53 14.34
1.43 1.437 1.490 .500 1.427 1.344 8.78 15.00
11.19
1.56 1.562 1.615 .750 1.552 1.468 8.59 15.44
1.78 1.781 1.771 1.688
1.865
1.81 1.812 1.802 9.66 12.31 17.06
1.718
1.87 - 1.928 .875 1.928
2.25 2.250 2.302 9.84
2.240 2.156 12.66 17.94
2.31 - 2.365 9.81
2.75 2.750 2.802 1.000 2.740 2.656 10.41 13.34 19.12
Specification Guide
Size to Run Sizes to Equalize Sizes to Pull
Locks “A” “A” Prong Prod.
“C-1” Running Locks Retracted “B” Probe Standard Pulling Tools♦
Size Trailing Guide 811-70
Tool Prod. Prod.
Prod. Min CAMCO OTIS
811-06 “A” Shank Prod. 811-80 Dia 812-07
811-71 Length JDC JUC SB RB SM
1.18 1.660 1.660 x 5-3/4 1.660 1/4 11-3/8 1.660 - - 1-3/16
1.43 1.900 - 1.900 -
1.900- 2-1/16 1.900-2-1/16 x5-7/8 7/16 12-3/8 1-1/2 1-1/2 -
1.56 2-1/16 2-1/16**
1.78
Not
1.81 2-3/8 2-3/8 x 6-1/8 2-3/8 1/2 13-3/4 2-3/8 2* 2 -
Required
1.87
2.25
2-7/8 2-7/8 x 6-3/32 2-7/8 1/2 14-1/2 2-7/8 2-1/2* 2-1/2 -
2.31
2.75 3-1/2 3-1/2 x 6-11/16 3-1/2 5/8 14-7/8 3-1/2 - 3 -
**For 1.900 - 2-1/16 Size, Pin up must be specified as Otis and Camco Pulling Tools have different core threads. Refer to Unit
on Model “B” Probe
∆ For complete operating instructions on the above running and pulling tools, refer to units filed under other Flow Control
Systems Tech Units.
* Pulling Tool will not pass through this size seal bore, but may be used for retrieving if there is no restriction in the tubing above
the Accessory smaller than the next larger seal bore.
Unit No. 3415 11-19-03 Equalizing Check Valves
Rev. A Page 4 of 15

“V” Equalizing Check Valve On Non-selective (“W” and “Z” Type) Locks
Parts List, Sizes 1.18 - 2.75
Refer to Drawing No. 333-940.
No. Req’d Size and Material No.
Item
Description “FWV” “RZV”
No. 1.18 1.43 1.56 1.78 1.81 1.87 2.25 2.31 2.75
809-3 809-04
“W” Lock Sub-Assy. 1
1
“Z” Lock Sub-Assy 1
2 Packing Unit Sub-Assy 1 1 Refer to specific unit
API Crossover
3 1 1
Packing Mandrel
“V” Equalizing Check
4 Valve Sub-Assy 1 1 H01-95622-00 H01-95623-00 H01-95624-00 H01-95625-00 H01-95626-00 H01-95627-00
Items 5 thru 8
H01-95622-01 H01-95587-01 H01-95240-01 H01-95239-01 H01-95945-01 H01-95946-01
5 Equalizing Plug* 1 1
(5/8 x 5/64) (5/8 x 5/64) (3/4 x 5/64) (1 x 5/64) (1-3/8 x 1/8) (1-9/16 x 1/8)
6 Valve Cage 1 1 H01-95604-00 H01-95605-00 H01-95606-00 H01-95607-00 H01-95608-00 H01-95609-00
7 Ball and Seat 1 1 H01-95610-00 H01-95611-00 HWV-EM000-05 H01-95613-00 H01-95614-00 HWV-EM000-06
8 Ball Seat Retainer 1 1 HWV-EM000-07 H01-95617-00 HWV-EM000-08 HWV-E1956-19 HWV-C5000-04 HWV-EM000-09
♦Material number shown is for subassembly containing the size equalizing plug listed in Item 5. If an equalizing plug with a port size different than that shown is
required, order the same subassembly Material number and state equalizing plug port size.
*For other equalizing port sizes refer to unit on Equalizing Plugs filed under this same Category

“FB-2” Equalizing Check Valve, Product Family No. 809-35

Parts List, Sizes 1.18 - 1.78
Refer to Drawing No. 211-406.
Item No. Size and Material No.
Description
No. Req’d 1.18 1.25 1.43 1.50 1.56 1.62 1.78
1 Fishing Neck 1 H02-21663-00 H02-21664-00 H02-21662-00
2 Stainless Steel Ball 1 HWW-T20S-000 HWW-T20S-00 HWW-T218-000
3 O-Ring 1 HWW-B119-H40 HWW-B121-H40 HWW-B127-H40
4 O-Ring 2 HWW-B018-H40 HWW-B019-H40 HWW-B124-H40
5 Ball Seat 1 H01-96528-00 H01-95331-00 H01-95113-00
6 By-Pass Mandrel 1 H01-96531-00 H01-95334-00 H01-95257-00
7 Equalizing Sleeve 1 H01-96530-00 H02-11065-00 H02-11066-00
8 Shear Screw 2 HWW-GE18-08B HWW-GE18-08B HWW-GE18-08B
9 O-Ring 1 HWW-B115-H40 HWW-B116-H40 HWW-B218-H40
10 Packing Mandrel 1 H01-96533-00 H01-96534-00 H01-95335-00 H01-95459-00 H01-95336-00 H01-95460-00 H01-95461-00
11 Center Adapter 1 H01-95187-00 H01-95188-00 H01-95189-00 H01-95190-00 H01-95191-00 H01-95192-00 H01-95193-00
12 Chevron Packing 4 H02-77090-02 H02-27091-02 H02-77082-02 H02-77067-02 H02-77093-02 H02-77068-02 H02-75780-00
13 End Adapter 1 H01-95200-00 H01-95201-00 H01-95202-00 H01-95203-00 H01-95204-00 H01-95205-00 H01-95206-00
14 Retaining Nut 1 H01-96529-00 H01-96529-00 H02-11067-00 H02-11067-00 H01-95330-00 H01-95330-00 H02-15646-00
Equalizing Check Valves Unit No. 3415 11-19-03
Rev. A Page 5 of 15

“FB-2” Equalizing Check Valve, Product Family No. 809-35

Parts List, Sizes 1.81 - 2.56
Refer to Drawing Nos. 211-406.
Item No. Size and Material No.
Description
No. Req’d 1.81 1.87 2.06 2.18 2.25 2.31 2.56
1 Fishing Neck 1 H02-21662-00 H03-40115-00 H02-21666-00
Stainless
2 1 HWW-T218-0000 HWW-T21H-000
Steel Bal
3 O-Ring 1 HWW-B-127-H40 HWW-B133-H40
4 O-Ring 2 HWW-B124-H40 HWW-B128-H40
5 Ball Seat 1 H01-95113-00 H01-95139-00
6 By-Pass Mandrel 1 H01-95257-00 H01-95135-00
Equalizing
7 1 H02-11066-00 H03-35337-00
Sleeve
HWW-GE18-08B HWW-GE18-0BB HWW-GE18-08B HWW-GE18-0DB
8 Shear Screw 2
1/4-20 x 1/4 lg 1/4-20 x 5/16 lg 1/4-20 x 1/4 lg 1/4-20 x 3/8 lg
9 O-Ring 1 HWW-B218-H40 HWW-B222-H40
10 Packing Mandrel 1 H01-95340-00 H01-95462-00 H02-69567-00 H03-35334-00 H01-95341-00 H01-95463-00 H08-59918-00
11 Center Adapter 1 H01-95194-00 H02-77523-04 H02-37555-00 H02-77538-00 H02-82491-04 H02-77531-04 H02-20104-00
12 Chevron Packing 4 H02-75779-02 H02-75705-02 H02-77075-02 H02-77538-00 H02-75734-02 H02-75708-02 H02-75736-02
13 End Adapter 1 H01-95207-00 H02-77542-00 H02-37556-00 H02-77539-00 H01-95209-00 H02-77532-04 H02-20105-00
14 Retaining Nut 1 H01-95281-00 H01-95281-00 H02-69568-00 H03-35335-00 H01-95282-00 H01-95282-00 H08-59264-00

Parts List, Sizes 2.75 - 3.75

Refer to Drawing Nos. 211-406, Sizes 2.75 - 3.31 and 217-778, sizes 3.68 - 3.75.
Item No. Size and Material No.
Description
No. Req’d 2.75 2.81 3.12 3.25 3.31 3.68 3.75
1 Fishing Neck 1 H02-21665-00 H02-44040-00 H02-21665-03 H02-21665-00 H02-12609-00
Stainless
2 1 HWW-T21P-000 HWW-T21P-000
Steel Bal
3 O-Ring 1 HWW-B141-H40 HWW-B141-H40
4 O-Ring 2 HWW-B135-H40 HWW-B135-H40
5 Ball Seat 1 H02-75606-00
6 By-Pass Mandrel 1 H01-96346-00 H01-96346-00 H01-96346-00
Equalizing
7 1 H01-96347-00 H02-44041-00 H01-96347-03 H01-96347-00 H02-12612-00
Sleeve
HWW-GE18-0DB
HWW-GE18-08B (4 Reg) HWW-GE18-0DB HWW-GE18-0DB
8 Shear Screw 2 (4 reg)
1/4-20 x 1/4 lg 1/4-20 x 3/8 lg 1/4-20 x 3/8 lg
1/4-20 x 3/8 lg
9 O-Ring 1 WW-B225-H40
10 Packing Mandrel 1 H01-96348-00 H01-96349-00 H08-54855-00 H08-91191-00 H02-27213-00 H02-11086-00 H08-54258-00
11 Center Adapter 1 H01-95198-00 H01-95199-00 H02-82572-00 H02-82649-00 H02-27515-00 H02-02754-00 H02-34048-00
12 Chevron Packing 4 H02-75709-02 H02-74803-02 H02-79035-02 H02-77077-02 H02-77096-02 H02-77044-02 H02-77046-02
13 End Adapter 1 H01-95211-00 H01-95212-00 H02-82571-00 H02-82648-00 H02-27516-00 H02-02755-00 H02-34049-00
14 Retaining Nut 1 H02-11068-00 H02-11068-00 H02-44043-00 H08-91192-00 H02-27214-00 H02-02174-00 H02-38032-00
Unit No. 3415 11-19-03 Equalizing Check Valves
Rev. A Page 6 of 15

Parts List, Sizes 3.81 - 4.75

Refer to Drawing Nos. 217-778, Size 3.81 and 217-779, Sizes 4.00 - 4.75.
Item No. Size and Material No.
Description
No. Req’d 3.81 4.00 4.12 4.31 4.56 4.75
1 Fishing Neck 1 H02-12609-00
2 Stainless Steel Ball 1 HWW-T21P-000
3 O-Ring 1 HWW-B141-H40
4 O-Ring 2 HWW-B135-H40
5 Ball Seat 1 H02-75606-00
6 By-Pass Mandrel 1 H01-96346-00
7 Equalizing Sleeve 1 H02-12612-00
HWW-GE18-0DB
8 Shear Screw 2
1/4-20 x 3/8 lg
9 O-Ring 1 HWW-B225-H40
10 Packing Mandrel 1 H02-10352-00 H02-29975-00 H02-26511-00 H02-12746-00 H02-12611-00 H02-26999-00
11 Center Adapter 1 H01-98476-00 H02-17029-00 H02-24823-00 H02-15653-00 H02-15657-00 H02-17324-00
12 Chevron Packing 4 H02-75895-02 H02-77058-02 H02-77049-02 H02-75893-02 H02-75896-02 H02-77076-02
13 End Adapter 1 H01-98477-00 H02-17027-00 H02-24822-00 H02-15651-00 H02-15655-00 H02-17322-00
14 Retaining Nut 1 H02-10350-00 -
15 Adapter Sub 1 H02-36556-00 H02-26512-00 H02-12745-00 H02-21924-00 H02-26998-00
-
16 O-Ring 1 HWW-B238-H40 HWW-B237-H40 HWW-B341-H40 HWW-B343-H40 HWW-B344--H40

Parts List, Sizes 5.25 - 6.12

Refer to Drawing Nos. 217-779, Sizes 5.25 - 5.75 and 864-015, Size 6.12.
Item No. Size and Material No.
Description
No. Req’d 5.25 5.50 5.75 6.12
1 Fishing Neck 1 H02-12609-00
2 Stainless Steel Ball 1 HWW-T21P-000
3 O-Ring 1 HWW-B141-H40 HWW-B141-V40
4 O-Ring 2 HWW-B135-H40 HWW-B135-V40
5 Ball Seat 1 H02-75606-00
6 By-Pass Mandrel 1 H01-96346-00
7 Equalizing Sleeve 1 H02-12612-00
HWW-GE18-0DB
8 Shear Screw 2
1/4-20 x 3/8 lg
9 O-Ring 1 HWW-B225-H40 HWW-B225-V40
10 Packing Mandrel 1 H02-12574-00 H08-54877-00 H02-33520-00 H08-6958-00
11 Center Adapter 1 H02-12280-00 H02-12356-00 H02-84681-00
12 Chevron Packing 4 H02-77079-02 H02-77098-02 H02-77080-02 -
13 End Adapter 1 H02-12279-00 H02-12354-00 H02-84680-00
14 Retaining Nut 1 -
15 Adapter Sub 1 H02-12573-00 H08-54876-00 H02-75435-00 H08-63956-00
16 O-Ring 1 HWW-B348-H40 HWW-B249-H40 -
17 Sleeve 1 H08-63957-00
18 O-Ring 1 - HWW-B254-V40
19 Seal Ring 1 H02-21844-00
Equalizing Check Valves Unit No. 3415 11-19-03
Rev. A Page 7 of 15

Sizes 1.18 - 3.31 Assembly and Dimensional Data Drawing No. 211-406

Sizes 3.68 and 3.81 Assembly and Dimensional Data Drawing No. 217-778
Unit No. 3415 11-19-03 Equalizing Check Valves
Rev. A Page 8 of 15

Sizes 4.00 - 5.75 Assembly and Dimensional Data Drawing No. 217-779

Size 6.125 Assembly and Dimensional Data Drawing No. 864-015

Equalizing Check Valves Unit No. 3415 11-19-03
Rev. A Page 9 of 15

Dimensional Data, Sizes 1.18 - 2.81

Refer to Drawing No. 211-406.
Dim 1.18 1.25 1.43 1.50 1.56 1.62 1.78 1.81 1.87 2.06 2.18 2.25 2.31 2.56 2.75 2.81
A .875 1.188 1.375 1.75 2.313
B .250 .438 .75
C .688 1.000 1.187 1.50 2.062
D 1.240 1.427 1.771 2.23 2.687
E .562 .625 1.062 1.25 1.563
F 1.240 1.302 1.490 1.552 1.615 1.672 1.803 1.865 1.905 2.160 2.228 2.307 2.364 2.625 2.802 2.865
G 1.177 1.427 1.552 1.771 1.802 2.052 2.177 2.24 2.24 2.552 2.74
H .50 .625
J 3.62 3.06 3.43 3.31
K 10.62 8.61 10.09 11.62 11.63
L 13.00 13.31 15.18 17.37 18.59 18.81
M 1.38 2.81 3.78 3.81 4.75 5.94
N .88 1.19 1.28 1.31

Dimensional Data, Sizes 3.12 - 6.12

Refer to Drawing Nos. 217-778, Sizes 3.12 - 3.81, 217-779, Sizes 4.00 - 5.75 and 864-015, Size 6.12.
Dim 3.12 3.25 3.31 3.68 3.75 3.81 4.00 4.12 4.31 4.56 4.75 5.25 5.50 5.75 6.12
A 2.313 3.125
B .75 -
C 2.062 2.89
D 2.687 -
E 1.563
F 3.21 3.40 3.74 3.80 3.87 4.11 4.21 4.38 4.65 4.84 5.35 5.60 5.87 6.24
G 3.11 3.24 3.30 3.67 3.74 3.80 3.99 4.15 4.30 4.55 4.74 5.24 5.48 5.74 6.10
H .625 1.50
J 3.31 3.31 3.25 -
K 11.62 11.87 10.59 10.62
L 18.59 16.46 17.65 17.03 18.75 17.93 18.125 18.50 19.62
M 4.75 4.125 3.31 3.156 3.81 4.00 3.50 3.93 3.43
N 1.37 1.31 1.28 1.31 1.37 2.12
Unit No. 3415 11-19-03 Equalizing Check Valves
Rev. A Page 10 of 15

“RB-2” Equalizing Check Valve, Product Family No. 809-36

Parts List, Sizes 1.43 - 1.87
Refer to Drawing No. 211-405.
Item No. Size and Material No.
Description
No. Req’d 1.43 1.50 1.56 1.78 1.81 1.87
1 Fishing Neck 1 H02-21664-00 H02-21662-00
2 St. Stl. Ball 1 HWW-T20S-000 HWW-T218-000
3 O-Ring 1 HWW-B121-H40 HWW-B127-H40
4 O-Ring 2 HWW-B019-H40 HWW-B124-H40
5 Ball Seat 1 H01-95331-00 H01-95113-00
6 By-Pass Mandrel 1 H01-95334-00 H01-95257-00
7 Equal Sleeve 1 H02-11065-00 H02-11066-00
HWW-GE18-08B
8 Shear Screw 2
1/4-20 x 1/4 lg
9 O-Ring 1 HWW-B116-H40 HWW-B218-H40
10 Packing Mandrel 1 H02-11081-00 H02-30908-00 H02-11082-00 H02-11083-00 H02-11083-00
11 Center Adapter 1 H01-95189-00 H01-95190-00 H01-95191-00 H01-95193-00 H01-95194-00 H02-77523-04
12 Chevron Packing 4 H02-77082-02 H02-77067-02 H02-77093-02 H02-75780-02 H02-75779-02 H02-75705-02
13 End Adapter 1 H01-95202-00 H01-952303-00 H01-95204-00 H01-95206-00 H01-95207-00 H02-77524-04
14 Retaining Nut 1 H02-11067-00 H02-30909-00 H01-95330-00 H02-15646-00 H01-95281-00 H02-60304-00

Parts List, Sizes 2.25 - 2.81

Refer to Drawing No. 211-405.
Item No. Size and Material No.
Description
No. Req’d 2.25 2.31 2.56 2.75 2.81
1 Fishing Neck 1 H02-21666-00 H02-21666-00 H02-21665-00 H02-21665-00
2 St. Stl. Ball 1 HWW-T21H-000 HWW-T21H-000 HWW-T21P-000 HWW-T21P-000
3 O-Ring 1 HWW-B133-H40 HWW-B133-V40 HWW-B141-H40 HWW-B141-V40
4 O-Ring 2 HWW-B128-H40 HWW-B128-V40 HWW-B135-H40 HWW-B135-V40
5 Ball Seat 1 H01-95139-00 H01-95139-00 H02-75606-00 H02-75606-00
6 By-Pass Mandrel 1 H01-95135-00 H01-95135-00 H01-96346-00 H01-96346-00
7 Equal Sleeve 1 H01-95134-00 H01-95134-00 H01-96347-00 H01-96347-00
HWW-GE18-0BB HWW-GE18-0DB HWW-GE18-0DB* HWW-GE18-0DB
8 Shear Screw 2
1/4-20 x 5/16 lg 1/4-20 x 3/8 lg 1/4-20 x 3/8 lg 1/4-20 x 3/8 lg
9 O-Ring 1 HWW-B222-H40 HWW-B222-V40 HWW-B222-H40 HWW-B225-V40
10 Packing Mandrel 1 H02-11084-00 H02-31655-00 H08-59263-00 H02-11085-00 H02-96910-00
11 Center Adapter 1 H01-95196-00 H02-77531-04 H02-20104-00 H01-95198-00 H02-77552-00
12 Chevron Packing 4 H02-75734-02 H02-75708-02 H02-75736-02 H02-75709-02 H02-74803-02
13 End Adapter 1 H01-95209-00. H02-77532-00 H02-20105-00 H01-95211-00 H02-77553-00
14 Retaining Nut 1 H01-95282-00 H02-31654-00 H08-59264-00 H02-11068-00 H02-96447-00
* 4 Required for size 2.75
Equalizing Check Valves Unit No. 3415 11-19-03
Rev. A Page 11 of 15

Parts List, Sizes 3.12 - 4.31

Refer to Drawing Nos. 211-405, Sizes 3.12 - 3.31, 217-770, Sizes 3.68 - 3.81
and 217-780, Sizes 4.00 - 4.31.
Item No. Size and Material No.
Description
No. Req’d 3.12 3.31 3.68 3.75 3.81 4.00 4.31
1 Fishing Neck 1 H02-44040-00 H02-21665-00 H02-12609-00
2 Stainless Stl. Ball 1 HWW-T21P-000 HWW-T21P-000 HWW-T21P-000
3 O-Ring 1 HWW-B141-H40 HWW-B141-H40 HWW-B141-H40
4 O-Ring 2 HWW-B135-H40 HWW-B135-H40 HWW-B135-H40
5 Ball Seat 1 H02-75606-00 H02-75606-00 H02-75606-00
6 By-Pass Mandrel 1 H01-96346-00 H01-96346-00 H01-96346-00
7 Equal Sleeve 1 H02-44041-00 H01-96347-00 H02-12612-00
HWW-GE18-0DB
HWW-GE18-0DB HWW-GE18-0DB
8 Shear Screw 2* (4)
1/4-20 X 3/8 lg 1/4-20 X 3/8 lg
1/4-20 X 3/8 lg
9 O-Ring 1 HWW-B225-H40 HWW-B225-H40 WW-B225-H40
10 Packing Mandrel 1 H02-44042-00 H02-41687-00 H02-02175-00 H02-38027-00 H02-11087-00 H02-29975-00 H02-12746-00
11 Center Adapter 1 H02-82572-00 H02-27515-00 H02-02754-00 H02-34048-00 H01-98476-00 H02-17029-00 H02-15653-00
12 Chevron Packing 4 H02-79035-02 H02-77096-02 H02-77044-02 H02-77046-02 H02-75895-02 H02-77058-02 H02-75893-00
13 End Adapter 1 H02-82571-00 H02-27516-00 H02-02755-00 H02-34049-00 H01-98477-00 H02-17027-00 H02-15651-00
14 Retaining Nut 1 H02-44043-00 H02-27214-00 H02-02174-00 H02-38032-00 H02-10350-00 - -
15 Adapter Sub H02-12G10-08 H02-31323-00 H02-12972-00 H02-33524-00 H03-33140-00 H02-30459-00 H08-63956-00
16 O-Ring 1 - HWW-B237-H40 HWW-B341-H40
* 4 required on size 3.12.

Parts List, Sizes 4.56 - 6.12

Refer to Drawing No. 217-780.
Item No. Size and Material No.
Description
No. Req’d 4.56 4.75 5.25 5.75 5.81 5.95
1 Fishing Neck 1 H02-12609-00
Stainless
2 1 HWW-T21P-000
Stl. Ball
3 O-Ring 1 HWW-B141-H40
4 O-Ring * HWW-B135-H40 [2]
5 Ball Seat 1 H02-75606-00 H02-75606-00 H02-75606-00
By-Pass
6 1 H01-96346-00 H01-96346-00 H01-96346-00
Mandrel
7 Equal Sleeve 1 H02-12612-00 H02-12612-00 H02-12612-00
HWW-GE18-0DB
HWW-GE18-0DB HWW-GE18-0DB
8 Shear Screw 2* (4)
1/4-20 X 3/8 lg 1/4-20 X 3/8
1/4-20 X 3/8 lg
9 O-Ring 1 WW-B225-H40 HWW-B225-V40 HWW-B225-H40
Packing
10 1 H02-12611-00 H02-26999-00 H02-12574-00 H02-33520-00 H03-33141-00 H02-30960-00
Mandrel
11 Center Adapter 1 H02-15657-00 H02-17324-00 H02-12280-00 H02-84681-00 H02-77047-00 (3) H02-17086-00
Chevron
12 4 H02-15656-00 H02-77076-00 H02-12278-00 H02-29729-00 H02-75783-02 H02-77054-02
Packing
13 End Adapter 1 H02-15655-00 H02-17322-00 H02-12279-00 H02-84680-00 H02-77048-00 H02-17084-00
14 Retaining Nut 1 -
15 Adapter Sub H02-12G10-08 H02-31323-00 H02-12972-00 H02-33524-00 H03-33140-00 H02-30459-00
16 O-Ring HWW-B343-H40 HWW-B344-H40 HWWB-343-H40 HWW-B249-H40 HWW-B249-V40 HWW-B249-H40
* Number in brackets [ ] indicates number required.
Unit No. 3415 11-19-03 Equalizing Check Valves
Rev. A Page 12 of 15

“RB-2” Equalizing Check Valve, Product Family No. 809-36

Sizes 1.43 - 3.31 Assembly and Dimensional Data Drawing No. 211-405

Size 3.68 - 3.81 Assembly and Dimensional Data Drawing No. 217-770
Equalizing Check Valves Unit No. 3415 11-19-03
Rev. A Page 13 of 15

Sizes 4.00 - 5.95 Assembly and Dimensional Data Drawing No. 217-780

Dimensional Data
Refer to Drawing Nos. 211-405, 217-770 and 217-780.
Dim A B C D E F
1.43 1.427
1.50 1.188 1.000 1.427 .625 1.490
1.56 1.552
1.78
181 1.375 .437 1.187 1.771 1.062 1.771
1.87
2.25 2.240
2.31 1.750 1.500 2.230 1.250 2.302
2.56 2.552
2.75 2.740
2.81 2.802
2.313 .750 2.062 2.687
3.12 3.115
3.31 2.302
3.68 3.678
3.75 3.740
3.81 3.802
4.00 1.562 3.990
4.31 4.303
4.56 3.125 - 2.890 - 4.552
4.75 4.740
5.25 5.240
5.75 5.740
5.81 5.802
5.95 5.938
Unit No. 3415 11-19-03 Equalizing Check Valves
Rev. A Page 14 of 15

Dimensional Data, (Continued)

Refer to Drawing Nos. 211-405, 217-770 and 217-780.
Dim G H J K L N
1.43 1.427
1.50 1.490 .500 3.06 8.61 13.31 1.19
1.56 1.552
1.78 1.771
15.188
181 1.802 3.43 10.09 1.28
1.87 1.865 15.68
.625
2.25 2.240
11.62
2.31 2.302 3.31 17.37 1.31
2.56 2.552
2.75 2.740 3.25 11.63 18.81
3.68 3.678
1.37
3.75 3.740 16.46
3.81 3.802
4.00 3.990 17.43 1.31
4.31 4.303 18.75 1.28
1.500
4.56 4.552 - 10.59 17.93
1.31
4.75 4.740 18.125
5.25 5.240 18.50
5.75 5.740
18.62 1.37
5.81 5.802
5.95 5.938 18.66
Equalizing Check Valves Unit No. 3415 11-19-03
Rev. A Page 15 of 15

Equalizing And Pulling Position “FB-2” And “RB-2”

Assembly and Dimensional Data Drawing No. 211-407

Dimensional Data
Refer to Drawing No. 211-407.

Size P
1.18 and 1.25 15.12
1.43, 1.50, 1.56 and
14.53
1.62
1.78, 1.81, 1.87,
16.71
2.06 and 2.18
2.25, 2.31 and 2.56 18.41
2.75 and 2.81 20.62
3.12, 3.25 and 3.31 20.40
3.68, 3.75 and 3.81 18.68
4.00 19.65
4.12 19.25
4.31 20.97
4.56 20.15
4.75 20.33
5.25 20.72
5.75 and 5.81 20.84
5.95 20.88