EN

Thank-you for choosing a Hoover washing

machine. We are proud to always offer Environmental conditions
new, innovative and technologically This appliance is marked according to
advanced products, with a complete range the European directive 2012/19/EU
of home appliances to ensure true on Waste Electrical and Electronic
assistance in your daily routine. Equipment (WEEE).
WEEE contains both polluting substances (which
We suggest you register your product at can cause negative consequences for the
www.registerhoover.com to gain faster environment) and basic components (which can
access to supplementary services solely be re-used). It is important to have WEEE
reserved to our most loyal customers. subjected to specific treatments, in order to
remove and dispose properly all pollutants, and
Carefully read this manual for correct and recover and recycle all materials. Individuals can
safe appliance use and for helpful tips on play an important role in ensuring that WEEE
efficient maintenance. does not become an environmental issue; it is
essential to follow some basic rules:
l WEEE should not be treated as household
Only use the washing machine waste;
after carefully reading these instructions. l WEEE should be handed over to the relevant
We recommend you always keep this collection points managed by the municipality or
manual on hand and in good condition for by registered companies. In many countries, for
any future owners. large WEEE, home collection could be present.
In many countries, when you buy a new
Please check that the appliance is
appliance, the old one may be returned to the
delivered with this instruction manual,
retailer who has to collect it free of charge on a
warranty certificate, service centre address
one-to-one basis, as long as the equipment is of
and energy efficiency label. Also check that
equivalent type and has the same functions as
plugs, drain hose support hook and liquid
the supplied equipment.
detergent or bleach tray (only on some
models) are included. We recommend you
keep all these components. Contents

On receipt of your appliance please 1. GENERAL SAFETY RULES

check it carefully for damage. Any 2. INSTALLATION
damage found must be reported to the
delivery driver immediately. Alternatively 3. PRACTICAL TIPS
damage found must be reported to the
4. MAINTENANCE AND CLEANING
retailer within 2 days of receipt.
5. QUICK USER GUIDE
Each product is identified by a unique 16- 6. CONTROLS AND PROGRAMS
character code, also called the “serial
number”, printed on the sticker. This can be 7. THROUBLESHOOTING AND WARRANTY
found inside the door opening. This code is
a unique code for your product that you will
need to register the product warranty, or if
you need to contact the customer service
centre.

2
1. GENERAL SAFETY in a safe way and understand the
RULES hazards involved.
Children shall not play with the

EN
l This appliances is intended to appliance. Cleaning and user
be used in household and maintenance shall not be made
similar applications such as: by children without supervision.
- Staff kitchen areas in shops, offices
and other working environments; l Children should be supervised
- Farm houses; to ensure that they do not play
- By clients in hotels, motels and with the appliance.
other residential type environments;
l Childrenof less than 3 years
- Bed and breakfast type environments.
A different use of this appliance should be kept away unless
from household environment continuously supervised.
or from typical housekeeping l If
the supply cord is damaged, it
functions, as commercial use by must be replaced by the
expert or trained users, is excluded manufacturer, its service agent
even in the above applications. If or similarly qualified persons in
the appliance is used in a manner order to avoid a hazard.
inconsistent with this it may reduce
the life of the appliance and may l Only use the hose-sets
void the manufacturer’s warranty. supplied with the appliance for
Any damage to the appliance or the water supply connection
other damage or loss arising (do not reuse old hose-sets).
through use that is not consistent l Waterpressure must be between
with domestic or household use 0.05 MPa and 0.8 MPa.
(even if located in a domestic or
household environment) shall not l Make sure carpets or rugs do
be accepted by the manufacturer to not obstruct the base or any of
the fullest extent permitted by law. the ventilation openings.
l Thisappliance can be used by l The OFF condition is reached
children aged from 8 years and by placing the reference mark on
above and persons with reduced the programmes control/knob in
physical, sensory or mental the vertical position. Any other
capabilities or lack of experience different position of such control
and knowledge if they have been sets the machine in ON condition
given supervision or instruction (only for models with programmes
concerning use of the appliance knob).

3
l After installation, the appliance l Do not expose the washing
must be positioned so that the machine to rain, direct sunlight
plug is accessible. or other weather elements.
Protect from possible freezing.
l The maximum load capacity of
dry clothes depends on the l When moving, do not lift the
model used (see control panel). washing machine by the knobs
l To consult the product technical
or detergent drawer; during
specification please refer to the transport, never rest the door on
manufacturer website. the trolley. We recommend two
people lift the washing machine.
Safety instructions l In the event of fault and/or
malfunction, turn off the
l Before cleaning or maintaining washing machine, close the
the washing machine, unplug water tap and do not tamper
the appliance and turn off the with the appliance.
water tap. Immediately contact the
Customer Service Centre and
l Make sure the electrical system only use original spare parts.
is earthed. Otherwise, seek Failure to observe these
qualified professional assistance. instruction may jeopardise
l Please do not use converters, appliance safety.
multiple sockets or extension
cords.

WARNING:
water may reach very high
temperatures during the
wash cycle.
By placing the mark on this
l Make sure there is no water in product, we are confirming
the drum before opening the
compliance to all relevant
door. European safety, health and
l Do not pull on the power cord environmental requirements which
or appliance to unplug the are applicable in legislation for
machine. this product.

4
2. INSTALLATION
l Release the power chord and 1

EN
drain hose from the securing
clip at the rear of the machine. A A
B
l Remove the 2 or 4 transportation B A
A
screws (A) on the back and B B
remove the 2 or 4 flat washers,
rubber bungs and plastic spacer
tubes (B) as illustrated in figure 1.
l If the washing machine is built-in,
unscrew the 3 or 4 transportation
screws (A) and remove the 3 or
4 flat washers, rubber bungs and
plastic spacer tubes (B).
l During the removal of the screws
occasionally spacer tubes fall
inside the product, these can be
remove by tilting the product forward 2
and recovering them from the floor A
or inside the base of the machine. 3
1 2
l Cover the open transportation
screw holes with the 2 or 4
plastic caps included in the
instruction bag.
B
WARNING:
keep packaging materials
away from children.

Place the corrugated plastic

sheet, found on top of the
appliance during the unpacking
process, into the base of the C
appliance as shown in figure 2 3
(according to the model,
2 1
consider version A, B or C).

5
Instructions for mounting the
furniture door

l Position the template onto the

reverse of the furniture door. It
is possible to mount the hinges
and closure magnet on the right
or left-hand side depending on
your requirements. Mark the
screw hole positions, then drill
out these positions.
B
C

A
l Fixthe hinges in place with the
4 screws provided (A).

l Fixthe magnet (B) in place

using screw (C).

l Mount the plate (D) on the right D

or left-hand side, depending on F
your installation requirements. E
Place the plastic support (E)
under the plate and fix it in
position with screw (F).
G

l Snap mount cap (G) in the

lower position.

6
l Mount the furniture door to the
front of the washer using the
hinges. Place the spacers

EN
under the hinges (I) and then
fix in position with screw (H).
H I
We suggest mounting the
furniture door so that it opens
towards the left, which is the
same direction as the porthole
door. This will leave more
space when you are loading
washing into the appliance.

l Slide the washer into an

opening of the size indicated in 60
0m
the diagram opposite. A furniture in.
plinth may be run across the front
of the appliance, but its height will
825 min.
820 min.

be dictated by the height the

washer is set at. 600

59
6 570
l The 4 adjustable feet allow the
height of the washer to be
adjusted from 820 mm to a
maximum of 840 mm. To adjust
the height, you should remove
the nuts fitted to each foot and
replace these with the 5 mm
nuts supplied. Raise the feet to
your desired height and then
fully tighten the lock nut to the
base of the washer.

7
Hydraulic connections 3
l Connect the water hose to the water
supply tap (fig. 3) only using the hose
supplied with the appliance (do not
reuse old hose-sets).

l Some models may include one or more of

the following features:
l HOT&COLD (fig. 4):
water mains connection settings with hot
and cold water for higher energy savings.
Connect the grey tube to the cold water 4
tap and the red one to the hot water
tap. The machine can be connected to
the cold water tap only: in this case, some 1
programs may start a few minutes later.

l AQUASTOP (fig. 5):

a device located on the supply tube that
stops water flow if the tube deteriorates;
in this case, a red mark will appear in the
window “A” and the tube must be 5 6
replaced. To unscrew the nut, press the
one-way lock device "B".
B B
l AQUAPROTECT – SUPPLY TUBE WITH
GUARD (fig. 6):
Should water leak from the primary A
internal tube "A", the transparent A
containment sheath "B" will contain water
to permit the washing cycle to complete.
At the end of the cycle, contact the
Customer Service Centre to replace the 7
supply tube.

Setting
l The washing machine should be installed
in its final position such that the water fill
hose is not kinked or trapped. The
corrugated drain hose should be inserted
into suitable drain pipe of between 50 cm
and 85 cm height above the floor using min 4 cm
the curved drain hose support. If an under
max 100 cm

sink connection is used the drain hose

must be routed above the sink overfill +2,6 mt
max min 50 cm
opening to prevent back siphoning. Care
max 85 cm
must be taken to avoid kinking or trapping
the drain hose (fig. 7).

8
l Level the appliance using the feet as
illustrated in figure 8: 8
a. turn the nut clockwise to release the

EN
screw;
b. rotate the foot to raise or lower it until it A
touches to the floor;
c. lock the foot, screwing in the nut, until it
tightens against to the bottom of the
washing machine. B
l Plug in the appliance.

WARNING:
contact the Customer Service Centre C
should the power cord need
replacement.

Detergent drawer
9
The detergent draw is split into 3 1
compartments as illustrated in figure 9:
l compartment "1": for prewash detergent;
2
l compartment “ ”: for special additives,
softeners, starch fragrances, etc.;

WARNING:
only use liquid products; the washing
machine is set to automatically dose
additives at each cycle during the last
rinse.

l compartment "2": for washing detergent. 10

A liquid detergent cup is also included IN
SOME MODELS (fig. 10). To use it, place it
in compartment "2". This way, liquid
detergent will only enter the drum at the
right time. The cup can also be used for
bleach when the “Rinse” program is
selected.

WARNING:
some detergents are not designed for
use in the dispenser drawer but are WARNING:
supplied with their own dispenser that installation faults are not covered by
is placed in the drum directly. the manufacturers warranty.

9
3. PRACTICAL TIPS Is a hot wash required?
l Pretreat stains with stain remover or soak
Load tips dried in stains in water before washing to
reduce the necessity of a hot wash
programme.
WARNING: when sorting laundry, make Save up to 50% energy by using a 60°C
sure: wash programme.
- have eliminated metallic objects such as Following is a quick guide with tips and
hair clips, pins, coins, from laundry; recommendations on detergent use at the
- to have buttoned pillow cases, closed various temperatures. In any case, always
zips, tied loose belts and long robe read the instructions on the detergent for
ribbons; correct use and doses.
- to have removed rollers, hooks or clips
from curtains;
- to have carefully read clothing washing
labels; When washing heavily soiled whites,
- to have removed any persistent stains we recommend using cotton
using specific detergents. programs of 60°C or above and a
normal washing powder (heavy duty)
that contains bleaching agents that at
l When washing rugs, bedcovers or other
medium/high temperatures provide
heavy clothing, we recommend you avoid
excellent results.
the spinning cycle.
l To wash wool, make sure the item can be
machine washed and marked by the
“Pure virgin wool” symbol with the “Does For washes between 40°C and 60°C
not mat” or “Machine washable” label. the type of detergent used needs to be
appropriate for the type of fabric and
level of soiling.
Helpful suggestions for the user Normal powders are suitable for “white”
or colour fast fabrics with high soiling,
while liquid detergents or “colour
A guide environmentally friendly and protecting” powders are suitable for
economic use of your appliance. coloured fabrics with light levels of
soiling.
Maximise The Load Size

l Achieve the best use of energy, water,

detergent and time by using the For washing at temperatures below
recommended maximum load size. 40°C we recommend the use of liquid
Save up to 50% energy by washing a full detergents or detergents specifically
load instead of 2 half loads. labeled as suitable for low temperature
washing.
Do you need to pre-wash?

l For heavily soiled laundry only!

SAVE detergent, time, water and For washing wool or silk, only use
between 5 to 15% energy consumption detergents specifically formulated for
by NOT selecting Prewash for slight to these fabrics.
normally soiled laundry.

10
4. MAINTENANCE AND l Remove and clean the filter; when
finished, replace it turning it clockwise.
CLEANING The filter handle will be locked when it is

EN
To clean the washing machine exterior, use not possible to turn any further and the
a damp cloth, avoiding abrasives, alcohol handle is horizontal. Smearing a small
and/or solvents. To maintain a good wash amount of liquid soap on the filter seal will
performance we recommend that the soap help refitting.
drawer and pump filters are regularly l Repeat the previous steps in reverse
cleaned. A monthly service wash, using a order to reassemble all parts.
proprietary cleaner is also recommended.

Drawer cleaning

l We recommend you clean the drawer to

avoid accumulating detergent and
additive residue.

l To do this, extract the drawer using slight

force, clean it with running water and
reinsert it in its housing.

l Ensure the siphon cap is correctly S u g g e s tio n s fo r m o v e s o r

refitted. prolonged disuse

l Should the washing machine be stored in

Filter cleaning an unheated room for a long period of
time, drain all water from tubes.
l The washing machine comes with a
l Unplug the washing machine.
special filter able to trap large residue,
such as buttons or coins, which could l Detach the tube from the drainage
clog the drain. system and clip on the rear of the
machine and lower it, fully draining water
l Only available on certain models: pull out into a bowl.
the corrugated hose, remove the stopper
and drain the water into a container. l Secure the drain tube with the drainage
system and clip on the rear of the
machine when finished.
l Ensure all the water has been emptied
from the drum. l Keep the door glass and gasket clean.

l Before unscrewing the filter, we The manufacturers warranty only

recommend you place an absorbent cloth covers faults within the product of a
under it to keep the floor dry. A small mechanical or electrical nature.
amount of water will come out of the filter Faults caused by handling,
as you remove it - this is normal. installation or miss use are not
covered and may incur a charge for
l Turn the filter counter-clockwise to the any repair visit to resolve.
limit stop.

11
5. QUICK USER GUIDE 6. CONTROLS AND
This washing machine automatically adjusts PROGRAMS
the level of the water to the type and
quantity of washing. This system gives a
reduction in energy consumption and a
saving in washing times.
A
Program selection

l Turn on the washing machine and select

the required program.
L
l Adjust the washing temperature if
necessary and press the required "option"
buttons. I B
l Press the START/PAUSE button to start
washing. F G H C E D
Should power go out when the washing
machine is running, a special memory
saves the settings and, when power
A Programme selector with OFF
returns, the machine resumes the cycle
from where it left off. position
l At the end of the programme, the B START/PAUSE button
message "End" will appear on the display C DELAY START button
or, on some models, all wash stage
D OPTIONS button
indicator lights will turn on.
E RAPID / STAIN LEVEL button
Wait until the DOOR LOCKED light has F TEMPERATURE SELECTION
gone out before opening the door. button
G SPIN SPEED button
l Turn off the washing machine.
H NIGHT & DAY button
For any type of wash, see the program
F+G KEY LOCK
table and follow the operating sequence
as indicated. I Digital display
L DOOR LOCKED indicator light
Technical data
Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.

12
 START/PAUSE button
WARNING:
Don’t touch the display while inserting

EN
the plug because the machines Close the door BEFORE selecting the
calibrates the systems during the first button START/PAUSE.
seconds: touching the display, the
machine couldn’t work property. In l Press to start the selected cycle.
this case, remove the plug and repeat
the operation.
When the START/PAUSE button has
been pressed, the appliance can take
few seconds before it starts working.
PROGRAMME selector with OFF
position
ADD OR REMOVE ITEMS AFTER THE
PROGRAMMES HAS STARTED (PAUSE)
When the programme selector is turned l Press and hold the START/PAUSE
the display lights up to show the settings button for about 2 seconds (some
for the programme selected. indicator light and the time remaining
For energy saving, at the end of the indicator will flash, showing that the
cycle or with an inactivity period, the machine has been paused).
display level contrast will decrease.
l Wait until the DOOR LOCKED light has
N.B.: To switch the machine off, turn gone out before opening the door.
the programme selector to the OFF
position.
Before you open the door, please
check water level is below the door
l Press the START/PAUSE button to start opening to avoid flooding.
the selected cycle.

l Once a programme is selected the l After you have added or removed items,
programme selector remains stationary on close the door and press the
the selected programme till cycle ends. START/PAUSE button (the programme
will start from where it left off).
l "End" will appear in the display at the
end of the program and the DOOR CANCELLING THE PROGRAMME
LOCKED light will go off, it is now
l To cancel the programme, set the
possible to open the door.
selector to the OFF position.
l Switch off the washing machine by
turning the selector to OFF. l Wait 2 minutes until the safety device
unlocks the door.

The programme selector must be

returned to the OFF position at the end
DELAY START button
of each cycle or when starting a
subsequent wash cycle prior to the next l This button allows you to pre-programme
programme being selected and started. the wash cycle to delay the start of the
cycle for up to 24 hours.

13
l To delay the start use the following - AQUAPLUS
procedure: l This option (available only in some
programmes) allows you to wash the load
- Select the required programme. in a much larger quantity of water and
this, together with the new combined
- Press the delay start button once to action of the drum rotation cycles, where
activate it (h00 appears on the display) water is filled and emptied, will give you
and then press it again to set a 1 hour garments which have been cleaned and
delay (h01 appears on the display). The rinsed to perfection so that the detergent
pre-set delay increases by 1 hour each dissolves completely, ensuring an
time the button is pressed, until h24 efficient cleaning action.
appears on the display, at which point
pressing the button again will reset the l This function is for the people with
delay start to zero. delicate and sensitive skin.

- Confirm by pressing the START/PAUSE l This function can be used for children’s
button. The delay countdown will begin items and for washing of very dirty items,
and when it has finished the programme for which you are required to use a lot of
will start automatically. detergent, or for washing of Towels
whose fibres have the tendency to hold
l It is possible to cancel the delay start by the detergent.
turning the programme selector to OFF.
- HYGIENE +
If there is any break in the power supply Activated when you set 60°C of
while the machine is operating, a special temperature. This option allows deep
memory stores the selected programme cleaning of your clothes by maintaining the
and, when the power is restored, it same temperature for the whole wash.
continues where it left OFF.
If an option is selected that is not
compatible with the selected
The following options must be
programme then the option indicator
selected before pressing the
light first flashes and then goes off.
START/PAUSE button.

RAPID / STAIN LEVEL button

OPTIONS button
This button allows you to choose between
This button allows you to choose between two different options, depending on the
three different options: selected programme.

- PREWASHING - RAPID
l This option allows you to make a prewash The button becomes active when
and it is particularly useful for heavily you select the RAPID (14/30/44 Min.)
soiled loads (can be used only on some programme on the knob and allows you to
programmes as shown in the table of select one of three durations indicated.
programmes).
- STAIN LEVEL button
l We recommend you use only 20% of the l Once the programme has been selected
recommended quantities shown on the the wash time set for that programme will
detergent pack. be automatically shown.

14
l This option allows you to choose between
3 levels of wash intensity modifying the The machine is fitted with a special
length of the programme, depending on electronic device, which prevents the
spin cycle should the load be

EN
how much the fabrics are soiled (can only
be used on some programmes as shown unbalanced. This reduces the noise
in the table of programmes). and vibration in the machine and so
prolongs the life of your machine.

TEMPERATURE SELECTION
button
NIGHT & DAY button
l This button allows you to change the
temperature of the wash cycles. l This option reduces the intermediate spin
speed to 400 rpm, where applicable,
l It is not possible to raise the temperature increase the water level during rinsing
over the maximum allowed for the and keep the laundry immersed in water
programme, in order to protect the fabrics. after the final rinse, in order to spread the
fiber perfectly.
l If you want carry out a cold wash all the
indicators must be off.
l During the phase in which the water is
held in the tub, the relevant indicator light
SPIN SPEED button blink to show that the machine is at a
standstill.
l By pressing this button, it is possible to
reduce the maximum speed, and if you l Deselect the option to end the cycle with
wish, the spin cycle can be cancelled. a spin dry (which may be reduced or
l If the label does not indicate specific cancelled using the appropriate button)
information, it is possible to use the and emptying phase.
maximum spin expected in the program.
l Thanks to electronic control, the water in
the intermediate phases is emptied
To prevent damage to the fabrics, it is
silently, making this option very useful for
not possible to increase the speed
washing at night.
over the maximum allowed for the
programme.
KEY LOCK
l To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set. l Pressing simultaneously the buttons
TEMPERATURE SELECTION and SPIN
l It is possible to modify the spin speed SPEED for about 3 seconds, the
without pausing the machine. machine allows you to lock the keys. In
this way, you can avoid making
accidental or unwanted changes if a
An over dosing of detergent can cause button on the display is pressed
excessive foaming. If the appliance accidently during a cycle.
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program l The key lock can be simply cancelled by
and increase water consumption. pressing the two buttons simultaneously
again or turning off the appliance.

15
Digital Display 3) WASH TEMPERATURE INDICATOR
LIGHTS

The display’s indicator system allows you to This shows the washing temperature of the
be constantly informed about the status of selected programme that can be changed
the machine. (where allowed) by the relevant button.
If you want carry out a cold wash all the
indicators must be off.
3 1 2 78 4 9 5 6
4) CYCLE DURATION

l When a programme is selected the

display automatically shows the cycle
duration, which can vary, depending on
the options selected.
6
l Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
1) DOOR LOCKED INDICATOR LIGHT
l The indicator light is illuminated when the l The appliance calculates the time to the
door is fully closed. end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
Close the door BEFORE selecting the applicable to the size and composition of
START/PAUSE button. the load.

5) STAIN LEVEL INDICATORS LIGHTS

l When START/PAUSE is pressed on
the machine with the door closed, the l Once the programme has been selected,
indicator will flash momentarily and then the indicator light will automatically show
illuminate. the stain level set for that programme.

l Selecting a different stain level the

If the door is not properly closed, relevant indicator will light up.
the light will continue to flash for
about 7 seconds, after which the
6) OPTIONS INDICATOR LIGHTS
start command will be automatically
delete. In this case, close the door The indicator lights show the option that
in the proper way and press the can be selected by the relevant button.
START/PAUSE button.
7) KEY LOCK INDICATOR LIGHT
l Wait until the DOOR LOCKED light has The indicator light show that the keys
gone out before opening the door. are locked.

2) SPIN SPEED 8) WI-FI (some models only)

This show the spin speed of the selected l In the models with the Wi-Fi option, the
programme that can be changed or omitted icon indicates that the Wi-Fi system is
by the relevant button. working.

16
l For all the information about the l Through every wash phase "Kg MODE"
functionality and the instructions for an allows to monitor information on the wash
easy configuration of the Wi-Fi, please load in the drum and in the first minutes

EN
refer to the "Download" section on of the wash it:
http://wizardservice.candy-hoover.com. - adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type of
fabric selected to be washed it;
9) Kg MODE (function active only on - adjusts the rhythm of drum rotation for
certain programmes) the type of fabric being washed;
l During the first minutes of the cycle, the - recognizes the presence of lather,
"Kg MODE" indicator remain on while the increasing, if necessary, the amount of
intelligent sensor will weigh the laundry water during rinsing;
and adjust the cycle time, water and - adjusts the spin speed according to the
electricity consumption accordingly. load, thus avoiding any imbalance.

17
Table of programmes
1)
1
(MAX.) *
2
PROGRAMME (see control panel)

(MAX.) 2 1
All In One 20°C 4 4,5 5,5 6 20°

All Hygiene 4 4,5 5,5 6 60°

All In One 59 Min. 6 7 8 9 40°

14' 1 1 1,5 1,5 30°

3)
Rapid 30' 2 2,5 2,5 2,5 30°
14-30-44 Min.
44' 3 3,5 3,5 3,5 40°

Dark Colours 3 3,5 4 4,5 40° ( )

Wool 1 1 2 2 40°

Handwash & Silk 1 1 2 2 30°

Rinse - - - - -

Drain + Spin - - - - -
2)
Shirts 3 3,5 4 4,5 30° ( )

Delicates 2 2,5 2,5 2,5 40°

2)
Mixed 3 3,5 4 4,5 60° ( )
** 2)
6 7 8 9 60° ( )
2)
Whites 6 7 8 9 90° ( )

Sports 2,5 3 3,5 4 30° ( )

18
 ( ) Only with PREWASH option
selected (programmes with

EN
PREWASH option available).
(Only for models with liquid
detergent compartment)
When only a limited number of
articles have stains which require
treatment with liquid bleaching
agents, preliminary removal of
stain can be carried out in the
washing machine.
Please read these notes: Pour the bleach into the liquid
* Maximum load capacity of dry clothes, bleach container, inserted into the
according to the model used (see control compartment marked "2" in the
panel). detergent drawer, and set the
special programme RINSE.
When this phase has terminated,
** STANDARD COTTON PROGRAMMES turn the programme selector to
ACCORDING TO (EU) No 1015/2010 and the OFF position, add the rest of
No 1061/2010. the fabrics and proceed with a
normal wash on the most suitable
COTTON PROGRAMME WITH A programme.
TEMPERATURE OF 60°C.
1) When a programme is selected,
COTTON PROGRAMME WITH A
on the display is shown the
TEMPERATURE OF 40°C.
display shows the recommended
These programmes are suitable to wash temperature that can be
clean normally soiled cotton laundry and reduced (where allowed) by the
they are the most efficient programmes relevant button.
in terms of combined energy and water 2) For the programmes shown you
consumptions for washing cotton can adjust the duration and
laundry. intensity of the wash using the
These programmes have been STAIN LEVEL button.
developed to be compliant with the
temperature on the wash label on the 3) Selecting the RAPID program on
garments and the actual water the knob, it will be possible to
temperature may slightly differ from the select with the RAPID button, one
declared temperature of the cycle. of the three rapid programs
available among 14’, 30’ and 44’.

19
Programmes selection All In One 59 Min.
This programme allows you to wash mixed
To clean different types of fabrics and fabrics such as cottons, synthetics and
various levels of dirt, the washing machine mixed fabrics in only 59 minutes, using the
has specific programs to meet every need full load of the washing machine, at 40°C
of washing (see table of programmes). (or less) temperature. This programme is
ALL IN ONE technology particularly suited to slightly dirty fabrics.
This washing machine is equipped with an
Rapid (14-30-44 Min.)
innovative system with an high pressure jet
Washing cycle suggested for low loads and
that sprays a mixture of water and
slightly dirty. With this program it is
detergent directly into the load. The special
recommended to reduce the quantity of
motor movement used in this machine
detergent normally used, in order to avoid
manages the drum movement during the
unnecessary waste. Selecting the RAPID
start up of each programme, in conjunction
program and acting on the button you can
with the high pressure jet spraying the
choose one of three programs available.
detergent mixture into the load, the cycle
includes a set of spin actions that helps the Dark Colours
detergent solution to penetrate into the Program designed to mix all dark garments and to
fibers, helping dirt removal and ensuring avoid the loss of colour and the formation of creases.
the best available wash performance. The We recommend the use of liquid detergent.
ALL IN ONE system is also used during the
water load phases where the high pressure Wool
jet aids the complete removal of detergent This program performs a wash cycle
residues trapped in the clothes dedicated to the wool fabrics that can be
All In One 20°C washed in a washing machine, or the
Thanks to ALL IN ONE technology, this articles to be washed by hand.
innovative programme, allows you to wash
fabrics such as cottons, synthetics and Handwash & Silk
mixed fabrics at 20°C with a performance This programme allows a delicate washing
which is comparable to a 40°C wash. The cycle for garments specified as "Hand
consumption of this program is about 50% Wash only" and laundry items made from
of a conventional 40°C. Cottons wash. Silk or specified as "Wash as Silk" on the
fabric label.
IMPORTANT WASH PERFORMANCE
ADVICE: Rinse
l New, coloured garments should be washed This program performs 3 rinses with an
separately for at least 5 or 6 washes. intermediate spin (which can be reduced or
l Certain large dark items such as jeans excluded by using the appropriate button) . It
and towels should always be washed is used for rinsing any type of fabric, for
separately. example after a wash carried out by hand.
l Never mix NON COLOURFAST fabrics.
Drain & Spin
All Hygiene The program completes the drain and a
Thanks to the ALL IN ONE technology, this maximum spin. It is possible to delete or
program ensures deep cleaning by reduce the spin with the SPIN SPEED button.
optimizing the cycle in terms of temperature
and rinses, eliminating allergens and Shirts
detergent residues. Ideal for sensitive skin. The washing cycle is optimized to reduce the
Designed for cotton garments, it provides a creation of creases, keeping an excellent washing
60°C temperature and is recommended for performance. It is also possible to further reduce
a reduced load. the spin speed, to ensure an easier ironing.

20
Delicates Cottons
This program has reduced periods of drum This program is suitable to clean normally soiled
rotation during the cycle and is particularly cotton laundry and it is the most efficient program

EN
suitable or washing delicate fabrics. The in terms of combined energy and water
wash cycle and rinses are carried out with a consumptions for washing cotton laundry.
high level of water to ensure the best
performance. Whites
Made to have a perfect washing. The final spin
at maximum speed gives more efficient removal.
Sports
Mixed This programme is specially designed to
The washing and rinsing optimise the speed wash mixed sportswear fabrics that cannot
and rhythm of the drum action and water be washed on hotter programmes and is
levels. The gentle spin, ensures a reduced designed to remove the dirt and staining
formation of creases in the fabric. created by participation in sports activities.

21
7. THROUBLESHOOTING AND WARRANTY
If you believe the washing machine is not working correctly, consult the quick guide
provided below which includes some practical tips on how to fix the most common
problems.

FOR ONE TOUCH MODELS

The Hoover Wizard app has a Clever Check-up function that allows you to confirm
the functionality and status of the product at any time. To use the Hoover Wizard app
you will need an Android smartphone with NFC technology.
More info can be found on the App.
If the display of the machine is showing an error (by a code or blinking LEDs), you
should turn on the App on your Android smartphone, with NFC on.
Place your smart phone against the One Touch logo on the control panel. You should now
be able to read the fault directory to solve the issue.

ERROR CODE FORMAT

l Models with a display: the error is shown by a number preceded by the letter “E”
(example: E2 = Error 2).
l Models without display: an error is shown by a sequence of flashes of every LED.
The error code is shown by the number of flashes followed by a pause of 5 seconds
(example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).

Error shown Possible causes and practical solutions

E2 (with display) The machine cannot load water.
2 flashes of the LEDs Make sure the water supply tap is open.
(without display)
Make sure the water supply hose isn’t bent, kinked or trapped.
Make sure the drain pipe is at the proper height (see installation section).
Close the water supply tap, unscrew the filler hose from the back of
the washing machine and make sure the “anti-sand” filter is clean
and not blocked.
E3 (with display) The washing machine does not drain water.
3 flashes of the LEDs Make sure the filter is not clogged.
(without display) Make sure the drain hose isn’t bent, kinked or trapped.
Make sure the home drainage system is not blocked and is allowing
water to flow through without obstruction. Try to drain the water in the sink.
E4 (with display) There is too much foam and/or water.
4 flashes of the LEDs Ensure the correct amount of detergent is being used and the
(without display) detergent is designed for use in a washing machine.
E7 (with display) Door problem.
7 flashes of the LEDs Make sure the door is correctly closed.
(without display) Make sure the clothes inside the drum are not preventing the door
from closing fully.
If the door is locked, turn off and unplug the washing machine from
the electrical supply socket, wait 2-3 minutes and reopen the door.
Any other code Turn off and unplug the washing machine, wait a minute. Turn on the
machine and restart a program. If the error occurs again contact an
Authorised Customer Service Centre directly.

22
OTHER ANOMALIES

Problem Possible causes and practical solutions

EN
The washing machine Make sure the product is plugged into a working supply socket.
does not work / start Make sure power is on.
Make sure the wall socket is working, testing it with another
appliance such as a lamp.
The door may not be correctly closed: open and close it again.
Check whether the required program was correctly selected and the
start button pressed.
Make sure the washing machine is not in pause or time delay mode.
Water leaked on the This may be due to a leak from the seal between the tap, supply
floor near the hose and fill valve; in this case, replace it and tighten the hose
washing machine connections correctly.
Make sure the front filter is correctly closed.
The washing machine The machine is fitted with a detection system that protects the load
does not spin and product from damage if the load is not balanced before spinning.
This may result in:-
• The machine attempts to balance the load, increasing the time of
spin.
• Reduction of the speed of spin to decrease vibrations and noise.
• The spin cycle aborting to protect the machine and load.
If this is experienced remove the load de-tangle it, reload it and
restart the spin program.
This could be due to the fact that water has not been completely
drained: wait a few minutes. If the problem persists, see Error 3
section.
Some models include a "no spin" function: make sure it is not
selected.
Check which options are selected and their effect on the spin cycle.
Excessive detergent can impede the spin cycle, ensure the correct
amount of detergent is being used.
Strong vibrations / The washing machine may not be fully levelled: if necessary, adjust
noises are heard the feet as indicated in the specific section.
during the spin cycle Make sure transport screws, rubber bungs and spacer tubes were
removed.
Make sure there are no foreign objects inside the drum (coins,
hinges, buttons, etc…).

The standard manufacturer warranty covers faults caused by electrical or

mechanical faults in the product due to an act or omission of the manufacturer. If
a fault is found to be caused by factors outside the product supplied, miss-use or
as a result of the instructions on use not being followed, a charge may be
applied.

23
The use of ecological detergents without If the problem persists or if you suspect a
phosphates may cause the following effects: malfunction, immediately contact an
Authorised Customer Service Centre.
- cloudier rinse drain water: This effect is
tied to the suspended zeolites which do It is always recommended to use original
not have negative effects on rinse spare parts, that are available at our
efficiency. Authorised Customer Service Centres.
- white powder (zeolites) on laundry at
the end of the wash: this is normal, the
Warranty
powder is not absorbed by fabric and
The product is guaranteed under the
does not change its colour. terms and conditions stated on the
To remove the zeolites, select a rinse certificate included with the product. The
programme. In the future consider using warranty certificate must be duly filled in
slightly less detergent.
and stored, so as to be shown to the
Authorised Customer Service Centre in
- foam in the water at last rinse: this
case of need. Proof of purchase must
does not necessary indicate poor rinsing.
be made available at the time of any
Consider using less detergent in future
warranty related repair.
washes.

- abundant foam: This is often due to the

anionic surfactants found in the The manufacturer declines all
detergents which are hard to eliminate responsibility for any printing errors in
from laundry. the booklet included with this product.
In this case, do not re-rinse to eliminate Moreover, it also reserves the right to
these effects: it will not help at all. make any changes deemed useful to its
We suggest conducting a maintenance products without changing their essential
wash using a proprietary cleaner. characteristics.

24
fkhldsk
fkhldsk
fkhldsk
- HBWM T - AH (6÷9) -
16.11 - 43015656 - Canon Italia - Business Services Channel