NEMA PRODUC T OFFERING

—
Baldor-Reliance® NEMA motors
ABB is a leader in power and automation technologies that enable
utility, industrial and commercial customers to improve performance,
reduce cost and minimize environmental impact.

General purpose motors

Product / offering Benefits and features Suggested applications
Single phase motors Superior switch design provides optimized torque pro- Pumps, fans, compressors, material
0.08-15 Hp (0.06-11 kW) files. Enclosures are constructed of heavy gauge steel. handling, machine tools, general
Totally enclosed Standard foot mount configurations, as well as C-face industrial equipment
0.17-10 Hp (0.12-7.5 kW) foot mounted and C-face footless. NEMA Premium®
Open drip proof efficient motors available.

Three phase motors Designed to meet or exceed energy efficiency Pumps, fans, compressors, material
0.125-400 Hp (0.09-298 kW) requirements, while delivering high starting torque, handling, machine tools, general
Totally enclosed overload capability and superior reliability. Super-E industrial equipment
0.25-450 Hp (0.18-336 kW) motors provide NEMA Premium efficiency and are
Open drip proof inverter ready.

Severe duty motors

Product / offering Benefits and features Suggested applications
General severe duty motors Designed to protect against contamination, moisture, Applications within severe process
0.25-800 Hp (0.18-597 kW) vibration and corrosion. These motors use Super-E industries including pumps, fans,
Totally enclosed, premium efficient electrical designs which are built to compressors, material handling,
three phase handle demanding duty cycles, provide high starting machine tools, general industrial
and peak torques, and operate over wide speed ranges. equipment
RPM XE - extreme efficient Innovative, NEMA drop-in replacement motor which Centrifugal fan and pumps,
motors achieves leading efficiency and lower lifetime costs. continuous applications,
10-100 Hp (7.5-74.5 kW) This synchronous motor is unique as it starts across compressors, applications
Totally enclosed, the line and offers IE4+ efficiencies. The motor is also demanding reduced weight or
three phase capable of operating on a standard inverter without inertia
feedback. NEMA mounting dimensions and design B
currents, allow installation without additional or non-
standard equipment.
IEEE 841 motors Meets and exceeds the requirements of IEEE Std. Applications within severe process
1-300 Hp (0.75-186 kW) 841-2009. Meets IEEE 45 on the nameplate. Designed industries including chemical, oil
Totally enclosed, with patented PLS lubrication system for bearing and gas, pulp and paper, metal and
three phase longevity. foundries, bulk material handling
and power generation
IEEE 841 / 661 XL motors Meets and exceeds the requirements of IEEE Std. 841- Belt driven applications
5-75 Hp (3.7-60 kW) 2009 with the exception of using Mobility grease for
Totally enclosed, exceptional roller bearing performance. Roller bearings
three phase for belted applications. Vertical lifting provisions.
Designed with patented PLS lubrication system for
bearing longevity. IP56 enclosure, dome shaft slinger,
bronze labyrinth seal, casketed conduit box.
Crusher duty motors High torque NEMA design A, exceeds NEMA design Aggregate/cement crushers, belt
5-600 Hp (3.7-298 kW) C torques. Designs up to 50 Hp have oversized ball conveyors, screens, above ground
Totally enclosed, bearings while 60 Hp and up have ball and roller mining equipment
three phase bearing designs. Inverter ready nameplate with speed
ranges.
2 B A L D O R - R E L I A N C E N E M A M OTO R S

Product / Offering Benefits and features Suggested applications

IEEE 841XL Vertical solid shaft Meets and exceeds the requirements of IEEE std. 841- Applications within severe process
P-Base motors 2009. Designed and manufactured for normal, medium industries. Vertical turbine pumps,
Normal thrust and high thrust applications. Severe duty construction inline pumps, end suction pumps.
3-75 Hp (2.2-55.9 kW) with corrosion-resistant epoxy finish, cast-iron
Medium thrust construction, with vertical mounting with two lifting
3-40 Hp (2.2-29.8 kW) lugs for balanced lifting.
High thrust
50-75 Hp (37.3-55.9 kW)
Totally enclosed
Three phase
Quarry duty motors High torque design C, steel band frame and fan cover Above ground mining, belt conveyors,
2-10 Hp (1.5-7.5 kW) with cast iron endplates. IP55 enclosure includes bulk material handling
Totally enclosed, gasketed conduit box, cover and a shaft seal. Quarry
three phase duty motors are inverter ready.

Dirty duty® plus Designed for use where additional protection is Pumps, conveyors, marine
0.5-10 Hp (0.37-7.5 kW) required against wet and washdown environments,
Totally enclosed, corrosive environments and marine applications. 300
three phase series stainless steel shaft extension and finished with
a 2 part epoxy paint system, passing 2,000+ hours salt
fog test per ASTM B 117.
Washdown duty motors
Product / offering Benefits and features Suggested applications
Food safe stainless Baldor-Reliance® food safe motors, designed with Food processing where reliability in
steel motors smooth contours and advanced sealing, exceed IP69 intense cleansing environments is of
0.5-30 Hp (0.37-29 kW) for water to maximize motor life in high pressure, utmost importance.
Totally enclosed, sanitary cleaning environments.
three phase
0.5-1 Hp (0.37-0.75 kW)
Totally enclosed,
single phase
Stainless Steel Designed for applications that require harsh cleaning. Food processing, packaging
0.33-20 Hp (0.25-15 kW) 300 series stainless band, endplate, conduit box and equipment in harsh cleaning
Totally enclosed, hardware. Labyrinth seals on drive end and opposite environments.
three phase drive end shaft extensions.

Paint Free Designed for environments where frequent washdown Food processing, packaging
0.5-10 Hp (0.37-7.5 kW) cycles can compromise the surface finish of a painted equipment where frequent wash
Totally enclosed, washdown motor. 300 series stainless hardware, with cycles can compromise the surface
three phase labyrinth seal on the drive end shaft extension. of a painted motor.

White washdown motors Designed for environments where washdown Food processing, packaging
0.33-20 Hp (0.25-15 kW) cleaning occurs. 300 series stainless hardware, equipment where washdown
Totally enclosed, Neoprene gaskets, double sealed ball bearings and conditions occur.
three phase electrostatically applied epoxy finish makes the
motor corrosion resistant. Available in inverter-duty,
0.50-1.5 Hp (0.37-1.12 kW) jet pump, close coupled pump, brake motor, feather
Totally enclosed picker and cut saw for poultry processing.
Single phase
White Washdown feature Designed for environments where washdown Food processing, packaging
Cast Iron motors cleaning occurs. 300 series stainless hardware, equipment where washdown
5-75 Hp (3.7-56 kW) Neoprene gaskets, double sealed ball bearings and conditions occur.
Totally enclosed, electrostatically applied epoxy finish makes the motor
three phase corrosion resistant.
 PRODUC T OFFERING 3

Pump motors
Product / offering Benefits and features Suggested applications
Jet pump Construction features include a sturdy steel frame, Residential and industrial pumps,
0.33-3 Hp (0.25-2.2 kW) cast aluminum end plates with steel bearing seat commercial machinery, food
Totally enclosed, inserts for mechanical reliability. Opposite drive and beverage, wastewater and
three phase end shaft is slotted for convenience. Motor agricultural applications.
0.33-3 Hp (0.25-2.2 kW) construction can be tailored for specific applications
Open drip proof, and industries such as food processing, washdown
three phase applications or explosion proof enclosures for pumps
0.33-2 Hp (0.25-1.5 kW) in hazardous areas.
Totally enclosed,
single phase
0.33-3 Hp (0.25-2.2 kW)
Open drip proof,
single phase
JM, JP, WCP close coupled motors The motor flange and shaft are designed to support Residential and industrial pump
1-50 Hp (0.75-37.3 kW) the pump unit. Close coupled pump motors include applications requiring JM, JP and
Totally enclosed, over-sized ball bearings with locked drive end West Coast Fit.
three phase construction to minimize endplay. The Super-E®
1-75 Hp (0.75 - 55.9 kW) motors meet NEMA Premium® efficiency requirements.
Open drip proof, These motors have a corrosion resistant finish and are
three phase suitable to mount in any position. Motor construction
3-5 Hp (2.24-3.73 kW) can be tailored for specific applications and industries
Totally enclosed, such as food processing, washdown applications or
single phase explosion proof enclosures for pumps in hazardous
3 - 10 Hp (2.24 - 7.5 kW) areas. Also available with Aegis(R) bearing protection
Open drip proof, ring for VFD driven pumps.
single phase
Vertical p-base motors Designed and manufactured for normal, medium and Centrifugal pumps, sump pumps,
3-75 Hp (2.24-56 kW) high thrust applications. Severe duty construction turbine pumps, in-line pumps, fans,
Totally enclosed, with corrosion-resistant epoxy finish, cast-iron aerators, mixers, autoclaves.
3-60 Hp (2.24-45 kW) construction, with vertical mounting with two lifting
Open drip proof lugs for balanced lifting.

Submersible motors Available for both wet & dry pit applications. Wet pit Wet & dry pit pump applications;
1-100 Hp (0.75-74.57 kW) motors use effluent for cooling and can run 15 minutes slurry pumps, aerators, mixers
Totally enclosed, in air. Dry pit motors are designed to run continuously
three phase in air or submerged when properly applied. Cast iron
1-5 Hp (0.75-3.73 kW) frame and end shield with stainless steel hardware
Totally enclosed, and shaft provide reliability in hard environments.
single phase Additionally, submersible motors are UL listed and CSA
certified for Division 1, Class I, Group C & D.
Immersible motors Custom immersible motors are designed for use in Dry pit pump applications; slurry
5-250 Hp (3.73-186 kW) non-hazardous area dry pit applications where the pumps.
Totally enclosed, possibility of flooding exists. The motor features
three phase totally enclosed, blower-cooled enclosures and are
designed with a unique sealing system that exceeds
IP67 enclosure requirements. This system allows
reliable operation for a period of two weeks while
submerged under a maximum depth of thirty feet of
water.
Fire pump All motors meet UL requirements (File# E481231) in Fire pumps installed per NFPA-20.w
10-300 Hp (7.5-224 kW) open drip proof enclosures designed for relatively
Open drip proof, clean and dry environments. Exterior red paint
three phase RAL3002.
4 B A L D O R - R E L I A N C E N E M A M OTO R S

Explosion proof motors

Product / offering Benefits and features Suggested applications
General purpose XP motors Inverter Duty UL & CSA approved for Class I, Group D, Pumps, fans, conveyors in customer
0.25-60 Hp (0.18-45 kW) Class II, Group F & G; Single and three phase designs specified Division 1 hazardous
Totally enclosed, available. Super-E® motors have NEMA Premium® locations.
single and three phase efficiency with a 3 year warranty.

Severe duty XP Inverter Duty UL & CSA listed for Class I, Group C & Pumps, fans, conveyors in customer
1-250 Hp (0.75-186 kW) D, Class II, Group E, F, & G with a T3C temperature specified Division 1 hazardous
Totally enclosed, code. UL listed breather drain to protect against high locations.
three phase humidity environments. Super-E® motors have NEMA
Premium efficiency with a 3 year warranty.

Drill rig duty XP Inverter Duty UL & CSA listed for Class I, Group C & Pumps, fans, conveyors, on and off
0.25-200 Hp (0.37-150 kW) D with a T3C temperature code. UL listed breather shore rig service bulk fuel terminals,
Totally enclosed, drain and metallic dust slingers to combat humidity. transfer stations in customer
three phase Super-E® motors have NEMA Premium® efficiency with specified division 1 hazardous
a 3 year warranty. locations.

Variable speed motors

Product / offering Benefits and features Suggested applications
EC Titanium™ EC Titanium™ is an industry-leading motor that Fans, pumps, compressors, HVAC
utilizes FASR (Ferrite Assisted Synchronous systems, variable speed applications,
1-20 Hp (0.75-15kW) Motor-only; Reluctance) technology and provides IE5+ efficiency general purpose applications.
1-10 HP (0.75-7.5 kW) in a IP54 totally enclosed power dense motor or
Integrated Motor Drive. integrated motor-drive package. The EC Titanium
Totally enclosed fan cooled, is designed for constant and variable torque
three phase applications. All motors come standard with an
internal ground brush, include QR code nameplate and
are available in standard NEMA frame sizes.

AC laminated frame - RPM AC product line provides the ultimate in Centrifugal pumps and fans; plastic
RPM AC motors power density performance in either enclosed or extruders, winders, crane and hoists,
5-1000 Hp (3.73-746 kW) open construction. RPM AC product line provides traction, oil drilling, test stands.
Totally enclosed, continuous CT performance from zero speed to base
three phase speed. NEMA and IEC designs available, standard
induction, interior permanent magnet, and caged-IPM
designs.

AC V*S Master motors V*S Master motors provide continuous constant Extruders, conveyors, crane and
1/3-300 Hp (0.25-224 kW) torque performance across the entire speed range hoist, winders, web processing,
Totally enclosed, from zero speed to base speed in standard NEMA process control, test stands.
three phase frame sizes. These motors are available in TENV/IC410,
TEFC/IC411 and TEBC/IC416 configurations.
Direct drive cooling Replace the traditional gear and belt drive fan systems Wet and dry cooling towers, Air
tower motors application with a direct drive motor that allows cooled condensers, air cooled heat
7.5-250 Hp (5.6-186 kW) operations to run at optimal efficiency. A laminated exchangers
Totally enclosed, finned frame synchronous PM motor is high efficient
three phase with flange mounting dimensions.
 PRODUC T OFFERING 5

Farm duty motors

Product / offering Benefits and features Suggested applications
Grain dryer/centrifugal Designed to withstand the environments of farms. High pressure grain drying, storage
fan motors Screens on ODP models to protect against debris and farm equipment .
3-100 Hp (2.2-74 kW) entry. Sealed bearings on both ends of the motor.
Totally enclosed, TEFC models include a drive end seal and v-ring slinger
three phase to prevent moisture and contamination. Shaft length
5-30 Hp (3.7-22 kW) is 1” longer than NEMA standard.
Open drip proof,
three phase
5-16 Hp (3.7-12 kW)
Open drip proof,
single phase
Grain dryer / vane axial TEAO motors have sealed bearings, drive end seal and Vane axial fan crop dryers.
fan motors V-ring slinger to prevent moisture and contaminant
1.5-15 Hp (1.12-11.2 kW) ingress. Shaft 3/4” longer than NEMA standard, shaft
Open air over, keyed, drilled and tapped with internal 1/4-20 tap 1”
totally enclosed, deep. Thermostats. Epoxy finish withstands outdoor
single phase & three phase environments.

Aeration fan motors Lubrication fittings on NEMA T frames for easy on- Aeration fans for farm grain storage,
0.5-3 Hp (0.37 kW) site maintenance, ball bearings, corrosion protected exhaust fans, air handling systems.
Totally enclosed, with poxy finish to withstand outdoor environments.
single and three phase Normally-closed thermostats on three phase motors.

(PSC) direct drive fan Double shielded ball bearings, rugged steel frame, Confinement houses, exhaust fans,
0.25-1 Hp (0.18-0.75 kW) corrosion resistant epoxy finish. 1” extended thru air handling fans, unit heaters.
Totally enclosed, bolts. Permanent split capacitor.
single phase

HVAC motors
Product / offering Benefits and features Suggested applications
General HVAC motors Super E® NEMA Premium® efficient HVAC motors in Heating, ventilation, air conditioning
1-100 Hp (0.75-74.57 kW) ODP and TEFC designs with ball bearings and plugged blower and fan motors.
Totally enclosed, grease packages. Includes bar-coded spec number
open drip proof, label. Mounting holes on drive endplate enable field
three phase conversion to add Aegis shaft ground ring if desired.

Fan and blower Suitable for mounting in any position. Single phase Blowers, fans, condensers, unit
0.25-1.5 Hp (0.18-1.11 kW) designs include automatic thermal overloads. heaters, air circulation, ventilation,
Open drip proof, freezers.
single phase
0.25-5 Hp (0.19-3.72 kW)
Open drip proof,
three phase
Chiller/cooling Super-E® motors have NEMA Premium® efficiency Belted or drive shaft chiller/cooling
tower motors and 3 year warranty. Designed for wet, high humidity towers, fans, pumps, air handling
5-60 Hp (3.7-44.7 kW) environments. Corrosion resistant epoxy paint, double systems.
Totally enclosed, sealed bearings filled with moisture resistant grease,
three phase shaft seal/slinger.

Shaft grounding motors Super-E® motors have NEMA Premium efficiency and 3 Fans, pumps, blowers, unit handling,
1-400 Hp (0.75-398 kW) year warranty. Motors are fitted with bearing current HVAC systems, variable speed
Totally enclosed, mitigation devices mounted internally or externally to applications.
open drip proof, minimize stray shaft currents.
three phase
Definite purpose motors
Product / offering Benefits and features Suggested applications
Definite purpose motors Motors designed to cover a wide range of applications 2 speed applications, pressure
0.13-500 Hp (0.09-373 kW) and industries with very specific requirements. washers, arbor saws, woodworking,
Pre-1952 NEMA, U-frame, automotive
duty, synchronous pm
6 B A L D O R - R E L I A N C E N E M A M OTO R S

Unit handling
Product / offering Benefits and features Suggested applications
General unit handling, Super-E motors have NEMA Premium efficiency and 3 Conveyors, baggage handling, unit
motor only year warranty. Motors feature an oversized low profile handling, packaging, door operators,
0.5-7.5 Hp (0.37-5.6 kW) top mounted conduit box on 56 & 140T frames that elevators, hoists.
Totally enclosed, provide easy access for making connections. Footed
single and three phase frames include slotted feet for easy mounting on OEM
conveyors. UL/CSA recognized and CE certified.

High cycle brake motors Aluminum frame engineered for increased thermal Frequent start/stop applications,
0.5-3 Hp (0.37-2.2 kW) heat dissipation. Low inertia, high efficient motor with conveyors, baggage handling, unit
Totally enclosed, fast action DC brake with an integral rectifier. handling, packaging, door operators,
three phase elevators, hoists.

D-series brake motors "D" series brake which are spring set, magnetically Conveyors, baggage handling, unit
0.5-10 Hp (0.37-7.45 kW) released power off type brakes flange mounted to the handling, packaging, door operators,
Totally enclosed, motor with a manual release lever. elevators, hoists.
three phase

Short-series brake motors Short series brakes which are spring set, magnetically Conveyors, baggage handling, unit
1/2-5 Hp (0.37-3.7 kW) released power off type brakes integrally mounted to handling, packaging, door operators,
Totally enclosed, the motor for the most compact design. Single phase elevators, hoists.
three phase brake, inverter ready.

Servo motors
Product / offering Benefits and features Suggested applications
AC brushless N-series motors Designed with high performance neodymium magnets Cut-to-length, flying shear,
0.4-40 Nm continuous torque and low inertia rotor for acceleration. A completely machining, labeling, material
Peak torques are 4x continuous encapsulated winding allows heat to dissipate while handling, winding, 3D printing,
Totally enclosed, CE/cRUus protecting internal components from contamination. robotics.
Multiple feedback types to fit a range of applications.

AC brushless C-series motors Designed with bonded neodymium magnets and Cut-to-length, flying shear,
1.2-134 Nm continuous torque medium inertia rotor for load inertia matching. A machining, labeling, material
Peak torques 3x continuous completely encapsulated winding allows heat to handling, winding, robotics.
Totally enclosed, CE/cRUus dissipate while protecting internal components from
contamination. Multiple feedback types to fit a range
of applications.
AC brushless stainless All stainless steel constructionand laser etched Packaging, food handling, bakery
steel motors (SSBSM) nameplate makes SSBSM suitable for pharmaceutical machinery, beverage equipment,
0.45-3.6 Nm continuous torque and food processing industries. A completely measuring dispensing equipment.
Peak torques 3-4x continuous encapsulated winding allows heat to dissipate while
Totally enclosed, CE/UL protecting internal components from contamination.
IP67 rated enclosure for washdown conditions.
HDS series HDS series feature neodymium magnets for improved Cut-to-length, flying shear,
0.7-53 Nm continuous torque performance, less than 2% cogging torque. A compact machining, labeling, material
Peak torques 3x continuous segmented lamination design decreases overall size handling, winding, 3D printing,
Totally enclosed, CE/cRUus of the motor. A completely encapsulated winding robotics.
allows heat to dissipate while protecting internal
components from contamination. IP6 rated enclosure
with optional shaft seal.
 PRODUC T OFFERING 7

DC motors
Product / offering Benefits and features Suggested applications
Fractional DC For adjustable speed operation from SCR controls, Conveyors, extruders, packaging
0.25-3 Hp (0.18-2.23 kW) two designs are available - wound field and permanent equipment, mixers, winders, printing
Wound field magnet. 20:1 contact torque speed range with 90 presses, and metering pumps.
NEMA & IEC or 180 VDC armatures. Motor construction can be
0.25-5 Hp (0.18-3.73 kW) tailored for specific applications and industries.
Permanent magnet
NEMA & IEC
RPM III Laminated frame design provides more power, Mill drives, tube mills, coating lines,
5-500 Hp (3.7-372 kW) reliability and serviceability in a smaller package. A winders, printing presses, extruders,
NEMA & IEC larger armature allows optimum power generation and mixers, spindle drives.
beter ventalation for heat dissipation than standard
round frame motors. A variety of enclosure styles are
available to meet customer cooling requirements.

Round frame motors Reduce maintenace with constant pressure brush Process lines, extruders, conveyors,
5-500 Hp (3.7-372 kW) springs and longer brushes. A variety of enclosure test stands, winders, printing press,
NEMA styles are available to meet customer cooling crane and hoist, web processing,
requirements. Tachometer adaptable. machine tools.

Above NEMA motor

Product / offering

Industrial Duty above NEMA The Industrial Duty NXR is suitable for many processes Industrial applications; Fans, pumps,
250-1750 Hp (185-1300 kW) in various industrial applications. The NXR is Class I conveyors, compressors.
Low and medium voltage Division 2 certified for hazardous area locations and
Totally enclosed can be configured with many options.This product is
TEFC, TEBC and TEAO a Build On Demand (BOD) product and can ship in as
quick as 2 weeks in most cases.

Grinders, buffers, lathes

Product / offering Benefits and features Suggested applications
Grinders Designed for industrial applications with cast Grinding
6-14 in. (152-355 mm) aluminum or cast iron wheel guards and tool rests. A
wheel diameters base mounted on/off switch or starter with overload
Single and three phrase protection and three year warranty.

Buffers Steel frame enclosure and base. Designed for use with Buffing
0.25-7.5 Hp (0.19-536 kW) soft cloth wheels.
Single or three phase
Polishing lathes All lathes are supplied with 8-foot cord with plug, Polishing - dental labs, jewelers,
0.25-0.75 Hp (0.19-0.56 kW) rubber feet and heavy construction to minimize lapidary
Single phase vibration, provisions for mounting to a laboratory
bench are provided as well.

Belt sanders There are several industrial belt sander options, Sanding
0.25-1.5 Hp (0.25-1.12 kW) fixed and tiltable belts, grinder/sanders and even an
Three phase adjustable speed sander for increased flexibility. All
units come with a base mounted on/off switch.
602E-MT equipped with 2x36" 100 grit belt, all others
2x48" 80 grit belt.

Please note: This is ABB’s global offering and some products might not be available in your country. Refer to abb.com for your location.
 N E M A D I S T R I B U TO R L I N E C A R D

9AKK106713A6536 10.2020

— —
ABB Motors and Mechanical Inc. We reserve the right to make technical We reserve all rights in this document and
5711 R.S. Boreham, Jr. Street changes or modify the contents of this in the subject matter and illustrations
Fort Smith, AR 72901 document without prior notice. With contained therein. Any reproduction,
regard to purchase orders, the agreed disclosure to third parties or utilization of
NEMA Motors Customer Support particulars shall prevail. ABB does not its contents – in whole or in parts – is
Ph: 1.479.646.4711 accept any responsibility whatsoever for forbidden without prior written consent of
potential errors or possible lack of ABB. Copyright© 2020 ABB
information in this document. All rights reserved
new.abb.com/motors-generators