Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Energy Analysis of Solar Greenhouse With Photovoltaic System and

Download as pdf or txt
Download as pdf or txt
You are on page 1of 13

See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/370779986

Energy Analysis of Solar Greenhouse with Photovoltaic System and Heat


Pump

Conference Paper · May 2023

CITATIONS READS

0 19

4 authors, including:

Danijela Nikolić Vanja M Šušteršič


University of Kragujevac University of Kragujevac
45 PUBLICATIONS 230 CITATIONS 51 PUBLICATIONS 207 CITATIONS

SEE PROFILE SEE PROFILE

Mladen Josijevic
University of Kragujevac
28 PUBLICATIONS 41 CITATIONS

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

COST Action TU1205 - BISTS View project

A METHOD TO ESTIMATE SAVINGS OF LED LIGHTING INSTALATION IN PUBLIC BUILDINGS View project

All content following this page was uploaded by Mladen Josijevic on 16 May 2023.

The user has requested enhancement of the downloaded file.


19th Conference on Thermal Science and Engineering of Serbia
Sokobanja, Serbia, October 22–25, 2019.

Society of Thermal Engineers of Serbia Faculty of Mechanical Engineering in Niš

Energy Analysis of Solar Greenhouse with Photovoltaic System and


Heat Pump
Danijela Nikolića(CA), Vanja Šušteršičb, Mladen Josijevićc and Živan Spasićd
a
Faculty of engineering University of Kragujevac, Kragujevac, RS, danijelan@kg.ac.rs
b
Faculty of engineering University of Kragujevac, Kragujevac, RS, vanjas@kg.ac.rs
c
Faculty of engineering University of Kragujevac, Kragujevac, RS, mladenjosijevic@gmail.com
d
Faculty of mechanical engineering University of Niš, Niš, RS, zivans@masfak.ni.ac.rs

Abstract: Greenhouses have significant importance in the field of agriculture and horticulture. A special
type of greenhouse is solar greenhouse, which is designed to collect solar energy during sunny days and to
store heat for use at night or during periods without the Sun. In this paper it is investigated a solar
greenhouse with photovoltaic panels. For greenhouse heating in the winter period and cooling in the
summer period, a ground source heat pump was used. Solar greenhouse is simulated in EnergyPlus
environment, while Open Studio plug-in in Google SketchUp was used for greenhouse design. Energy
analysis was performed with the major aim to minimize greenhouse energy consumption, and to achieve
solar greenhouse with net-zero energy consumption. Cases of different solar greenhouse orientations,
different photovoltaic slope and different photovoltaic cell efficiency were considered. The simulation
results showed that total energy consumption for heating and cooling of the greenhouse can be significantly
reduced by using the optimal parameters (orientation and photovoltaic slope angle). Also, by changing the
photovoltaics area and by using photovoltaics with higher cell efficiency, a concept of net-zero energy solar
greenhouses can be achieved.

Keywords: Solar greenhouse, Photovoltaic, Heat pump, Energy consumption.

1. Introduction
The rapid population increase over the last two centuries has caused a major economic development, which
influenced more energy consumption in the world. In recent years, question of energy security and stability
has become the cardinal question of the entire world economy, economic and social system. The whole world
today is faced with a problem of reducing the global warming due to the growing use of fossil fuels. In the
energy sector, the most important mechanisms for the fight against climate change are generally known -
increasing energy efficiency and the introduction of renewable energy sources.
Agriculture has relatively small share in total final energy consumption in both, industrialized and developing
countries. Modern agriculture requires energy use at all stages of agricultural production: water management,
irrigation, cultivation, harvesting and also farm machinery. In OECD countries around 3-5% of total final
energy consumption is used directly in the agriculture sector, while in developing countries that range is 4-8%
of total final commercial energy use [1]. According to the European energy statistics the total final energy
consumption of the 27 EU countries of the sector "agriculture/forestry" was given as 1,071 PJ, which is
corresponding to 2.2 % of the total final energy consumption in the European Union [2].
Greenhouses are widely used today all over the world, for indoor cultivation of vegetables, flowers, trees and
other agricultural plants. They give better quality of plants and protect them from natural environmental effects
such as wind or rain. At the other side, greenhouse is giving the ability for out of season growing. This type of
agriculture is described as ‘’protected agriculture’’ since it provides mechanical protections against outdoor
climatic conditions [3]. Greenhouses are designed to provide control and maintain the amount of solar
radiation, indoor air temperature, relative humidity and carbon dioxide levels in the aerial environment [4].
Significant amount of energy is necessary to greenhouse produce process and distribute the crops and plants
and energy saving is an important issue for greenhouse farming. Application of solar
energy in greenhouses could be of great importance, because it can reduce CO2 emission and heating costs.
Solar greenhouse is a special type of greenhouse, which is designed not only to collect solar energy during
sunny days but also to store heat for use at night or during cloudy periods. Overheating during the day can be
prevented using natural or mechanical ventilation for cooling. Ventilation also regulates the relative air

292
humidity [5]. Solar greenhouse uses solar energy with passive or active systems. Passive solar greenhouses
are a cost-efficient way for farmers to extend the growing season. Solar heating may be supplemented with
some auxiliary heating system to protect plants against extreme cold. Active solar greenhouses use
supplemental energy to move solar heated air or water from storage or collection areas to other regions of the
greenhouse, or to produce electricity by photovoltaics [6]. Various systems, including steam, hot water
radiation system or hot air heater system can be used for greenhouse heating, but it is considered that the
ground source heat pump system is a favorable option for greenhouse since it can provide both heating and
cooling energy [7]. In recent years, a large number of scientists have been studying various designs of
greenhouses that have used solar energy and geothermal energy.
Solar energy usage in commercial greenhouses to electricity supply for the cooling and mechanical ventilation
is an economic, sustainable solution. Solar photovoltaic array at greenhouses was the subject of many scientific
papers and studies. Hassanien at al. [8] gave a review of the solar energy applications technologies in the
environmental control systems of greenhouses (cooling, heating and lighting), generated energy of
photovoltaic and the use of photovoltaics for water pumping for irrigation. They also showed economic
analyses of this technology. Fatnassia at al. [9] analyzed two arrangements of photovoltaic panels array
(straight-line and checkerboard) in two different prototypes of greenhouses with Computational Fluid
Dynamic model. The study shows that compared to the straight-line arrangement, the checkerboard
photovoltaic panel setup improved the balance of the spatial distribution of sunlight received in the greenhouse.
Wang at al. [10] in their paper represent an integration of solar technology to modern greenhouse in China.
They shown that China's modern solar greenhouses with photovoltaic (PV) has payback period of less than 9
years. Trypanagnostopoulos at al. [11] considered how PV installation influenced to the plant shading in the
greenhouse. Photovoltaics were the fixed one, with panels placed on south facing greenhouse roof and two sun
tracking modes. Allardyce at al. [12], Hassanien at al. [13] and Roslan at al. [14] describe the greenhouse with
building integrated photovoltaics and their limitations. They have paid attention to the semi-transparent PV
with Dye-Sensitized solar Cells, (DSSC) as alternative greenhouse glazing that offers advantages including
enhanced thermal stabilization and improved yields. Influence of solar greenhouse shape to thermal
performances analyzed Mobtaker at al. in their paper [15]. Yano and Cossu [16] investigate PV electricity
generation in solar greenhouses, PV shading effects on plants and important aspects of greenhouse cultivation.
Gao at al. in [17] considered energy performance of greenhouse with sun-tracking photovoltaics and concluded
that quasi-perpendicular sun tracking improves the annual energy generation for 7.40 % compared to the closed
position.
Using a different heat pumps system in greenhouse enables large energy savings for heating and cooling. Yang
at al. [18] investigated heat pump system that used surplus air thermal energy and underground water thermal
energy as heat sources for greenhouse. Significant energy saving was achieved by using two of this type of
heat pump. Yang and Rhee evaluated a surplus air heat pump system for greenhouse cooling and heating in
Korea [19], and determined maximum energy savings of 76.3 % daily and 25.7 % monthly. Benli in his paper
[20] gave the comparison between a horizontal source and vertical source heat pump systems for a greenhouse
heating in the mild climate in Elaziğ, Turkey. The results showed that the utilization of the ground-source heat
pump is suitable for greenhouse heating in this region. Noorollahi at al. carried out numerical modeling and
economic analysis of greenhouse with a ground source heat pump in Iran [21]. Gas burning heating system
and an evaporative cooling system are considered to supply the greenhouse energy, and they were compared
with the GSHP system. The conclusion is that, due to the high price of electricity and heat pump units and low
price of natural gas in Iran, using GSHPs for greenhouses in Iran is not cost-effective. Hassanien at al. [22]
investigate the performance of using evacuated tube solar collector as a solar water heater assisted an
electric heat pump for greenhouse heating in China. This integration provide more than 35% of the total
required heat for greenhouse. Awani at al. [23] analyzed two cases of greenhouses: one with heat pump
(water/air) which was coupled with flat plate collector and the other with a vertical heat exchanger in order to
obtain a comfortable climate in the winter in the greenhouses. Good results are obtained comparing with others
similar results in research area. Russo at al. [24] carried out environmental analysis of the efficiency of a
Photovoltaic-Geothermal Heat Pump integrated system as a greenhouse heating system, compared to a
conventional hot air generator using liquefied petroleum gas. The estimated payback-time for energy and for
carbon emissions were 1 year and 2.25 years, respectively.
By installing more renewable energy technologies simultaneously in a solar greenhouse, the concept of nearly-
zero greenhouses can be realized easily. Yildirim and Bilir [25] presented the evaluation of a hybrid system

293
for a nearly zero energy greenhouse in the Mediterranean climate. A hybrid system consisted of grid connected
photovoltaics which generate sufficient electrical energy for lighting and assist a ground source heat pump. In
this way, a nearly zero energy greenhouse concept is foreseen for three different agricultural products.
Yearly coverage ratio values were between 86.8% and 104.5%. Sun at al. in [26] analyzed the possibilities for
improving the traditional greenhouse to new low-cost near-zero-energy solar greenhouse in China. The main
technical measures include internal and external insulation envelope using reflective aluminum knitting film;
the ecological water circulation system for solar heat storage and collection, and geothermal energy utilization.
It was concluded that the new solar greenhouse without artificial heating can achieve nearly zero net energy
concept.
By reviewing the literature, it was found that there are no researches in the field of greenhouses with the use
of renewable energy sources in the Serbia, which was a great challenge for investigation in this field. This
particular fact is supported by the increasing energy consumption and energy saving opportunities with the use
of renewable energy sources. The city of Kragujevac belongs to the Sumadija region, which has the great
opportunities for agriculture production, especially due to good climate conditions. In order to improve
agricultural production, the number of greenhouses has increased in the recent years. At the other side, a large
amount of energy can be saved by using a photovoltaic system and a geothermal pump in a solar greenhouse,
as shown by the results of this research. By setting a sufficiently large photovoltaic system it is possible to
even realize the concept of zero energy solar greenhouse concept.
This paper represents energy analyses of solar greenhouse located in Kragujevac, Serbia. A ground source heat
pump is implemented for heating in the winter period and cooling in the summer period, while grid connected
photovoltaics generate the electricity. When photovoltaic array produce more electricity than greenhouse
needs, the rest of PV generated electricity will be fed-in the electricity grid. When the PV system don`t satisfy
the greenhouse needs for electrical energy, then the electricity will be used from the electricity grid. Energy
analysis was performed with the major aim to minimize greenhouse energy consumption, and to achieve solar
greenhouse with zero net energy consumption. Solar greenhouse is simulated in EnergyPlus environment,
while Open Studio plug-in in Google SketchUp was used for design of the greenhouse with implemented
systems. Cases of different solar greenhouse orientations, different photovoltaic slope and different
photovoltaic cell efficiency were considered. In a case of higher cell efficiency of PV array, nearly zero
energy solar greenhouse concept can be achieved.

2. Model of analyzed solar greenhouse


Solar greenhouse, which is analyzed in this paper, is located in the city of Kragujevac, which lays in the Balkan
Peninsula in the state of Serbia, around 120 km south of its capital city of Belgrade. Its average height above
the sea is 209 m. The latitude of Kragujevac is 44.10N, the longitude is 20.55 0E and the time zone is GMT+1.0
h. Kragujevac has a moderate continental climate, with worm and humid summers with temperatures as high
as 37 0C. The winters are cool, with snow and with temperatures as low as -19 0C [27]. The EnergyPlus
software uses weather data from its own data base with weather files.
2.1. Solar greenhouse architecture
The investigated solar greenhouse is shown in Figure 1 and it is south-oriented. Greenhouse has a rectangular
shape (20x8 m), with a total area of 160 m2.
The vertical side walls (east and west) are in the form of an irregular quadruple. The small quadruple south
wall (20x0.5 m) is connected with the southern roof which has a slop angle of 40°. At a height of 4.86 m (ridge
of greenhouse), the southern roof cuts the northern wall, which has a slope of 60° and it is all the way to the
ground. South roof has dimensions 20x6.78 m with total area of 135.6 m2, of which 126.88 m2 are windows -
there are 60 identical windows with dimensions 2.18x0.97 m. The northern roof has dimensions 20x5.61 m
with total area of 112.2 m2. Two doors (2x2.5 m) are located on the side walls – east and west.
The greenhouse is made from modular elements that enable quick assembly, and the used materials are stable
and have lower heat conduction. Greenhouse frame is made of aluminum and it forms its shape. The northern
wall, the south wall and the side walls together with the doors are made of non massive sandwich structures
that are easily mounted on an aluminum frame. The sandwich structure consists of two layers of aluminum
sheet (thickness of 2 mm), with polyurethane foam (100 mm thickness) among them. These structures are

294
available on the market and they have good thermal properties with heat transfer coefficient of the 0.269
W/m2K.

Figure 1. <Solar greenhouse model in Google Sketch-Up>


The windows on the southern roof are double glazed with high-transparent glass of 4 mm thickness and they
are positioned at a distance of 13 mm (distances are fill with air space). The coefficient of solar transmission
of glass at a normal incident angle is 0.9, solar heat gain coefficient (SHGC) is 0.859 and the U-value is 1.45
W/m2K. Double glazing prevents condensation and reduces heat losses.
Software EnergyPlus has no developed module for plant implementation, but it has the ability to simulate
vegetation on the roofs. In this case, vegetative layer was used on the floor surface to calculate the share of
energy absorbed and emitted by the plants.
The schedule provided that in the greenhouse various activities are performed by two people, 5 hours a day
per day. The software takes into account people presence and the heat emission which is about 120 W per
person.
The air in the greenhouse became aggressive, too humid, full of gases, and it is necessary to replace it with
fresh air. By ventilation, these characteristics are altered to match the needs of cultivated crops. Natural
ventilation by opening doors and windows is foreseen in the months when the greenhouse is overheated, from
April 15th to October 15th. This can significantly save the cooling energy.
2.2. Photovoltaic array
Photovoltaic (PV) array is installed on the ridge of the greenhouse. The dimension of the surface on which the
photovoltaic modules are sited is 20x4 m with total area of 80 m2, while PV cell efficiency was 12 %. This
area continues to the southern slope of the greenhouse roof, and this position does not make a shade to the
greenhouse (Figure 2). The angle that this surface forms with the horizontal plane ranges from 0-90o.

Figure 2. < External surface of the greenhouse model for the installation of photovoltaics>

295
The PV system consists of the PV array and an inverter. It is an on-grid system. The operation of the PV array
is simulated by using EnergyPlus software. The main assumption is that when the PV system operates,
generated electricity would be immediately consumed. The surplus electricity is sold to the electricity grid. PV
panel is represented by the mathematical model of Generator:Photovoltaic:Simple from EnergyPlus [28],
which describes a simple model of PV that may be useful for early phase design analysis. The Generator:
Photovoltaic:Simple object represents the simplest model to predict photovoltaic energy production. In this
model, the user specifies the efficiency with which the PV array converts the incident solar radiation to
electricity. (In the other models, this efficiency is an output of the model.) The full geometric model for solar
radiation is used, including sky models, shading, and reflections, to determine the incident solar resource.
2.3. Ground source heat pump
In this paper, a unique heating and cooling system was used, using a geothermal heat pump, which in the
scientific research proved to be the most cost-effective. Ground source heat pump indirectly uses geothermal
energy and has high efficiency.
Figure 3 schematically describes the heat pump loop. The working fluid on the Source side of the loop is water
mixed with 15% glycol. Water circulates with circulation pump and thus transfers heat. In the winter period,
heat is drawn from the earth, which has a constant temperature of about 14 ̊ C [19]. The working fluid in the
earth evaporates and the vapor goes to the compressor station. The steam under pressure raises its temperature
and with the tendency to surrender its heat, enters the heat exchanger where it cools and condenses. The
condensate, which is still under pressure, encounters the expansion valve in order to reduce the pressure, which
creates the conditions for the liquid to evaporate again. In this state, the liquid re-enters the exchanger in the
ground and absorbs the heat required to evaporate, thereby closing this circuit and repeating it until the pump
operating mode changes [29].

Figure 3. < Source Side and Load Side Configuration of Water To Air Heat Pump [29]>
The Load side of the system uses air as a working fluid, which receives heat from the water in the heat
exchanger and, through the channel system with the fan, enters into thermal zone. In addition, this loop has an
additional heater that uses electricity (in this case) and it is activated as needed when the temperature of the
air supplied by the heat pump does not meet the needs of the thermal zone. In front of the heat exchanger there
is a mixer in which the external air enters and refreshes the air transported in the thermal zone, while at the
exit from the thermal zone, part of the air is released into the environment.
The heat pump changes the mode between cooling and heating depending on the zone's need using a thermostat
and return valve. EnergyPlus defines two heat exchangers (heating and cooling) to approach the operation of

296
a single heat exchanger that can operate in the heating or cooling mode. The 25 W circulation pump conducts
a constant fluid flow rate of 0.0033 m3/s. Vertical ground heat exchanger consists of U tubes with length of
76.2 m, diameter 6.35 cm and heat conductivity coefficient 0.391 W/mK. The heat exchanger, which delivers
heat to the consumers, has nominal capacity of 25 kW and an auxiliary heater of 32 kW [29].
Heating is needed during the cold season and can increase the growth of summer plants with keeping the
temperature of the greenhouse above the ambient temperature. In the winter period, heat is drawn from the
ground, which has a constant temperature of 14 ̊C. During the summer temperatures in the greenhouse reach
over 50 ̊C, which plants can`t stand, so it is necessary to cool the air. Natural ventilation in that case is not
enough, and then other conventional cooling devices must be used.
Air temperatures in the greenhouse are defined in relation to the needs for cultivation of different cultures in
different periods. The heating or cooling mode in EnergyPlus software is regulated by adjusting the
thermostats. The following schedule was adopted:
- heating mode: in the period from November 1st to April 1st, air temperature 16̊ 0C (from 07-17 h) and
10 0C (from 17-07 h);
- cooling mode: from April 1st to November 1st, air temperature 28 0C (from 07-19 h) and 10 0C (from
19-07 h);

3. Results and discussion


3.1. Different solar greenhouse orientation
Solar greenhouse with photovoltaic array (slope 40o) is simulated for four different orientations (Figure 4):
northwest-southeast 20o from east-west orientation (NW-SE 20o), east-west (E-W), northeast-southwest 20 o
from-west east orientation (NE-SW 20 o) and northeast-southwest 40° from E-W orientation (NE-SW 40o).

Figure 4. < Different orientation of solar greenhouse with photovoltaics (slope 40 o)>
The simulation results show that total energy consumption of greenhouse is changing with greenhouse
orientation. Differences in total energy consumption are not great, but any energy saving is significant. Total
energy consumption of greenhouse with northwest-southeast 20o, east-west, northeast-southwest 20o and
northeast-southwest 40o are 50.53 GJ, 50.2 GJ, 49.94 GJ and 49.69 GJ, respectively (Tab. 1). All simulations
were done for a period of one year. According to these results, if the turning of greenhouses from south to
north is observed, total energy consumption is reduced, so the most optimal orientation is the northeast-
southwest 40o. The greenhouse oriented to the west consumes the most energy for cooling compared to the
other orientations, while it does not have the least energy consumption for heating. In the summer, the east-
west oriented greenhouse is the most open to receiving solar energy, and therefore it takes a lot of energy for
cooling. On the other hand, in the winter, solar radiation reduces the heating energy consumption. The only
reason why the northeast-southwest 40o oriented greenhouse (closest to the north) has the lowest energy
consumption is due to the ratio of the required energy for heating and cooling, which is somewhat higher in
favor of cooling (Fig. 5). This orientation is more opened to the east, where the Sun is coming out, and in the
afternoon, the western wall creates a shadow that almost does not exist at the east-west orientation.

297
Table 1. <Total energy consumption, heating energy, cooling energy, generated and net-energu consumption in solar
greenhouse wuth photovoltaics and different orientation>
Total energy Net-energy
Heating energy Cooling energy Generated
Orientation consumption consumption
(GJ) (GJ) energy (GJ)
(GJ) (GJ)
NW-SE 20 ̊ 50.53 10.62 12.09 25.76 24.77
E-W 50.2 10.42 11.95 25.91 24.29
NE-SW 20 ̊ 49.94 10.48 11.64 25.5 24.40
NE-SW 40 ̊ 49.69 10.76 11.11 24.57 25.12
Total generated energy for greenhouse with northwest-southeast 20o, east-west, northeast-southwest 20o and
northeast-southwest 40o are 25.76 GJ, 25.91 GJ, 25.5 GJ and 24.57 GJ, respectively. It is clear that most
electricity is produced when photovoltaic array is turned to the east – west. Net-energy consumption is in all
analyzed cases about 50 % from total energy consumption (Fig. 6). Generated electricity is used to supply the
heat pump. By subtracting generated energy from the total energy consumption for four orientations it can be
concluded that the lowest net-energy consumption is obtained for east-west oriented greenhouse.
12.5 60
12.09
11.95 50.53 50.2 49.94 49.69
12 50
Energy (GJ)

11.64

Energy (GJ)
11.5 40

11.11
11 30
25.76 24.77 25.91 24.29 25.5 24.57 25.12
10.76 24.4
10.62
10.42 10.48 20
10.5

10
10

0
9.5 NW-SE 20 ̊ E-W NE-SW 20 ̊ NE-SW 40 ̊
NW-SE 20 ̊ E-W NE-SW 20 ̊ NE-SW 40 ̊ Total energy consumption (GJ) Generated energy (GJ)
Net-energy consumption (GJ)
Heating energy (GJ) Cooling energy (GJ)

Figure 5. <Heating and cooling energy consumption in Figure 6. <Total energy consumption, generated
solar greenhouse with photovoltaics and different electricity and net-energy consumption in solar
orientation> greenhouse with PV array and different orientation>
3.2. Different slope angle of PV array
Electricity generation depends of photovoltaic slope. It is necessary to set PV panels in the optimum slope
angle, where the photovoltaic cells will have the greatest involvement of the solar radiation. The model of
photovoltaics with slope angle of 40o (previous simulations) is rotated, so photovoltaic modules with a slope
of 0 ̊ (horizontal modules), 20 ̊, 30 ̊ and 90 ̊ (vertical modules) are simulated (Fig 7).

Figure 7. < Different slope angle of photovoltaics>


The greenhouse during the rotation of the module has the same orientation all the time - east-west. By
simulating the photovoltaic modules from these four slopes, results were obtained for comparison of the
produced electricity with the already known result of the module with a slope of 40 ̊. When the FN modules
have a horizontal position, 22.92 GJ of electricity is produced, 20.56 GJ of electricity is produced when the
slope is 20 ,̊ 26 GJ is produced at slope of 30 ̊, and at vertical position of PV array generates 17.33 GJ electricity

298
(Table 2, Fig. 8). According to these results, it can be concluded that the most optimal slope of photovoltaics
is 30 °.
Table 2. <Total energy consumption, heating energy, cooling energy, generated and net-energu consumption in solar
greenhouse wuth photovoltaics and different orientation>
Generated Generated electricity/total energy
Slope angle (o)
electricity(GJ) consumption (%)
0 22.92 45.68
20 25.56 50.92
30 26.03 51.85
40 25.91 51.62
90 17.33 34.61
Horizontal PV modules satisfy 45.68 % of the total energy consumption, photovoltaic modules with a slope
of 20 ,̊ 30 ̊ and 40 ̊ meet 50.92 %, 51.85 % and 51.62 % of energy needs, while vertical modules satisfy 34.61%
of total energy consumption.
Generated electricity (GJ)
30
25.56 26.03 25.91
25
22.92

20
17.33

15

10

0
Figure 8. <Generated electricity in solar
0 20 30 40 90
Slope angle
greenhouse with different photovoltaic
slope>

3.3. Different photovoltaic cell efficiency


Photovoltaic cell efficiency directly influences to the electricity generation in PV array. Previous simulation
was done with PV cell efficiency of 12 %, because these modules are cheapest and the most widespread on
the market, but they are not always the best solution. In this investigation, cell efficiency of 14 % and 16 %
are considered.
Simulation of greenhouse with optimal orientation (east-west) and optimal slope (30o) of photovoltaic array
shows that the total electricity generation with PV cells efficiency of η=14% is 30.37 GJ and with PV cells
efficiency of η=16% it is 34.71 GJ (Table 3 and Fig. 8), which is significantly higher than the generated energy
of 26.03 GJ with PV cells efficiency of 12%. With the increase the PV cell efficiency, net-energy consumption
is significantly reduced: 19.83 GJ for PV cells efficiency of 14 % and 15.49 GJ for PV cells efficiency of 16%,
compared to total greenhouse energy consumption of 50.2 GJ.
Table 3. <Generated energy, net-energy consumption and satisfaction of greenhouse energy needs in solar greenhouse
with optimal parameters and different PV cell efficiency>
Generated
PV cell Total energy Net-energy consumption electricity/total
Generated energy (GJ)
efficiency (%) consumption (GJ) (GJ) energy consumption
(%)
12 50.2 26.03 24.17 51.85
14 50.2 30.37 19.83 60.5
16 50.2 34.71 15.49 69.14
Electricity generated with PV cell efficiency of 14% meets 60.5% of greenhouse energy needs, while PV cell
efficiency of 16 % satisfies 69.14% of total energy consumption in the greenhouse (Figure 9, Table 3).

299
60

50.2 50.2 50.2


50
Energy (GJ)

40
34.71
30.37
30 26.03
24.17
19.83
20
15.49

10

0
12 14 16
PV cell efficiency Figure 9. <Total energy consumption, generated
electricity and net-energy consumption in solar
Total energy consumption (GJ) Generated energy (GJ) greenhouse with PV array and different PV cell
Net-energy consumption (GJ)
efficiency>

3.4. Net-zero energy solar greenhouse


Solar greenhouse of net-zero energy consumption is solar greenhouse whose systems use renewable energy
sources to produce as much energy as the total energy consumption of solar greenhouse.
The obtained simulation results of the solar greenhouse with PV array total area of 80 m2 show that this
capacity is insufficient to produce enough energy to meet the energy needs of analyzed solar greenhouse. The
maximum electricity generation is 69.42 % of the total energy consumption, and according to this relationship,
the area of the PV array should be 116 m2 for the production of electricity equal to the total energy
consumption. According to the previous statement, the model of implemented photovoltaics was modified in
the SkechUp program by increasing the external surface width by 1.8 m (Figure 10). This increasing in
photovoltaics width resulted with electricity generation in amount which is just a little more than total energy
consumption of solar greenhouse with defined optimal parameters.

Figure 10. <Model of solar greenhouse with photovoltaic area of 116 m2>
By simulating east-west oriented solar greenhouse with PV modules of total area of 116 m2, with slope angle
of 30o and photovoltaic cell efficiency of 16 %, it can be concluded that the net-energy consumption is -0.13
GJ, i.e. generated electricity is more than total energy consumption (Table 4). Energy production reaches
100.26 % of total energy consumption.
Table 4. <Total energy consumption, generated energy, net-energy consumption and satisfaction of greenhouse energy
needs in solar greenhouse with different PV area and optimal parameters>
Total energy Generated Net-energy Generated
consumption electricity consumption electricity/total energy
(GJ) (GJ) (GJ) consumption (%)
Greehhouse with PV area 80 m2 50.2 GJ 34.71 15.49 69.14
Greehhouse with PV area 116 m2 50.2 GJ 50.33 -0.13 100.26

300
Conclusion
The basic idea of this investigation was to determine the orientation and slope angle of PV array, at the
simulated solar greenhouse model in EnergyPlus software, which enable the greatest possible electricity
generation, and, achieving net-zero energy consumption in the greenhouse.
First, by comparing the results of energy consumption for heating and cooling in solar greenhouses with ground
source heat pump and the electricity generation with PV (80 m2) for four different orientations, the east - west
orientation was obtained as the best solution, according to the generated electricity. For the east - west
orientation, the slope angle of the PV array of 30 o was adopted as slope angle with maximal generated
electricity. For these values of the orientation and slope angle of solar greenhouse, and the cell efficiency of
the photovoltaics of 12 %, solar greenhouse had a total energy consumption of 50.2 GJ and net-energy
consumption of 24.17 GJ.
The values of generated electricity for PV cell efficiency of 14 % and 16 % were analyzed too. The net
greenhouse energy consumption for the adopted efficiency of 16% was reduced by 35.91 % compared to the
efficiency of 12 % and it was 15.49 GJ.
The aim of this research also was to achieve the concept of net-zero energy consumption in the solar
greenhouse. Therefore, it was necessary to increase the surface of the PV array to 116 m2, while retaining the
other parameters (orientation and slope) and cellular efficiency of the PV module of 16%, which resulted in a
net energy consumption of - 0.13 GJ.
Economically, photovoltaic system besides the heat pump requires large investments [10, 11, 25] with a long
payment period. With energy savings and increasing of agricultural yields, with the worldwide downward
trend in the price of photovoltaic and other renewable technologies, it is expected an increasing application of
RES in the field of agriculture.
Bearing in mind the high consumption of fossil energy and the increasing problem of global warming, in the
future, humanity must nevertheless turn to the renewable energy sources. Solar energy is certainly a very
attractive solution for the generation of energy because the sun is an inexhaustible source of energy and solar
conversion extremely clean way of obtaining energy.

Acknowledgements
This investigation is part of the projects TR 33015 and III 42013. The authors would like to thank to the
Ministry of Education and Science of Republic of Serbia for the financial support during this investigation.

References
[1] Sims, R., Mercado P., Krewitt W., Bhuyan G., Flynn D., Holttinen H., Jannuzzi G., Khennas S., Liu Y.,
O’Malley M., Nilsson L. J., Ogden J., Ogimoto K., Outhred H., Ulleberg Ø., Hulle F. van, Integration of
Renewable Energy into Present and Future Energy Systems, Cambridge University Press, Cambridge, United
Kingdom and New York, NY, USA, 2011
[2] Gołaszewski J., Visser C. at al., Stata of the Art of Energy Efficiency in Agriculture, Report of the FP7 project
289139, 2012, European Union
[3] Ghani S., Bakochristou F., Ahmed ElBialy E. M. A., Gamaledin S. M. A., Rashwan M. M., Abdelhalim A. M.,
Ismail S. M., Design challenges of agricultural greenhouses in hot and arid environments – A review,
Engineering in Agriculture, Environment and Food, 12 (2019), pp. 48–70
[4] Panwar N.L., Kaushik S.C., Kothari., Solar greenhouse an option for renewable and sustainable farming,
Renewable and Sustainable Energy Reviews, 15 (2011), pp. 3934– 3945
[5] Stauffer V., Tokhmat T., Solar Greenhouses for the Trans-Himalayas: A Construction Manual, International
Centre for Integrated Mountain Development, Indiana University, USA, 2004
[6] Bellows B., Solar Greenhouses, NCAT Agriculture Specialist, USA, 2003
[7] Yildirim N., Bilir L., Evaluation of a hybrid system for a nearly zero energy greenhouse, Energy Conversion and
Management 148 (2017), pp. 1278-1290
[8] Hassanien R. H. E., Li M., Lin W. D., Advanced applications of solar energy in agricultural greenhouses,
Renewable and Sustainable Energy Reviews 54 (2016), pp. 989-1001

301
[9] Fatnassia H., Ponceta C., Bazzano M. M.,Bruna R., Bertin N., A numerical simulation of the photovoltaic
greenhouse microclimate, Solar Energy 120 (2015), pp. 575-584
[10] Wang T., Wu G., Chen J., Cui P., Chen Z., Yan Y., Zhang Y., Li M., Niu D., Li B., Chen H., Integration of solar
technology to modern greenhouse in China: Current status, challenges and prospect, Renewable and Sustainable
Energy Reviews 70 (2017), pp. 1178-1188
[11] Trypanagnostopoulos G., Kavga A., Souliotis M., Tripanagnostopoulos Y., Greenhouse performance results for
roof installed photovoltaics, Renewable Energy 111 (2017), pp. 724-731
[12] Allardyce C. S., Fankhauser C., Zakeeruddin S., M., Grätzel M. Dyson P. J., The influence of greenhouse-
integrated photovoltaics on crop production, Solar Energy 155 (2017), pp. 517-522
[13] Hassanien R.H.E., Li M., Yin F., The integration of semi-transparent photovoltaics on greenhouse roof for
energy and plant production, Renewable Energy 121 (2018), pp. 377-388
[14] Roslan N., Ya'acob M. E., Radzi M. A. M., Hashimoto Y., Jamaludin D., Chen G., Dye Sensitized Solar Cell
(DSSC) greenhouse shading: New insights for solar radiation manipulation, Renewable and Sustainable Energy
Reviews 92 (2018), pp. 171-186
[15] Mobtaker H. G., Ajabshirchi Y., Ranjbar S. F., Matloobi M., Simulation of thermal performance of solar
greenhouse in north-west of Iran: An experimental validation, Renewable Energy 135 (2019), pp. 88-97
[16] Yano A., Cossu M., Energy sustainable greenhouse crop cultivation using photovoltaic technologies, Renewable
and Sustainable Energy Reviews 109 (2019), pp. 116-167
[17] Gao Y., Dong J. Isabella O., Santbergen R., Tan H., Zeman M. Zhang G., Modeling and analyses of energy
performances of photovoltaic greenhouses with sun-tracking functionality, Applied energy 233-234 (2019), pp.
424-442
[18] Yang S. H., Lee S. D., Kim Y. J., Rhee J. Y., Greenhouse Heating and Cooling with a Heat Pump System using
Surplus Air and Underground Water Thermal Energy, Engineering in Agriculture, Environment and Food 6
(2013) 3, pp. 86-91
[19] Yang S. H., Rhee J. Y., Utilization and performance evaluation of a surplus air heat pump system for greenhouse
cooling and heating, Applied Energy 105 (2013), pp244-251
[20] Benli H., A performance comparison between a horizontal source and a vertical source heat pump systems for a
greenhouse heating in the mild climate Elaziğ, Turkey, Applied Thermal Engineering 50 (2013) 1, pp. 197-206
[21] Noorollahi Y., Bigdelou P., Pourfayaz F., Yousefi H., Numerical modeling and economic analysis of a ground
source heat pump for supplying energy for a greenhouse in Alborz province, Iran, Journal of Cleaner Production
131 (2016), pp. 145-154
[22] Hassanien R.H.E., Ming L., Tang Y., The evacuated tube solar collector assisted heat pump for heating
greenhouses, Energy and Buildings 169 (2018), pp. 305-315
[23] Awani S., Chargui R., Kooli S., Farhat A., Guizani A., Performance of the coupling of the flat plate collector
and a heat pump system associated with a vertical heat exchanger for heating of the two types of greenhouses
system, Energy Conversion and Management 103 (2015), pp. 266-275
[24] Russo G., Verdiani A. S. A. G., Mugnozza G. S., Environmental analysis of geothermal heat pump and LPG
greenhouse heating systems, Biosystems Engineering 127 (2014), pp. 11-23
[25] Yildirim N., Bilir L., Evaluation of a hybrid system for a nearly zero energy greenhouse, Energy Conversion and
Management 148 (2017), pp. 1278-1290
[26] Sun S., Yhan C., Yang G., Yu Y., Research on A New Technology Integrated Low-cost, Near-zero-energy Solar
Greenhouse, Procedia Engineering 145 (2016), pp. 188-195
[27] Bojić M., Skerlić J., Nikolić D., Cvetković D., Miletić M, Toward future: positive net-energy buildings,
Proceedings, 4th IEEE International Symposium on Exploitation of Renewable Energy Sources, EXPRES 2012,
Subotica, Serbia, March 9-10, 2012., pp. 49-54
[28] Anonymous, ENERGYPLUS - Input Output Reference - The Encyclopedic Reference to EnergyPlus Input and
Output, University of Illinois & Ernest Orlando Lawrence Berkeley National Laboratory, Chichago, USA, 2016
[29] Anonymous, ENERGYPLUS - Engineering Reference, U.S. Department of Energy, University of Illinois &
Ernest Orlando Lawrence Berkeley National Laboratory, Chichago, USA, 2016

302
N aslov publikacije PROCEEDINGS,19th Conference on Therm alScience and
Engineering ofSerbia,Sokobanja,Serbia,October 22 – 25,
2019
Urednici M irjana Lakovi -Paunovi ,M laden Stojiljkovi
Tehni ka obrada M arko M an i
Grafi kidizajn Dragana Dim itrijevi Jovanovi
Izdava : M AŠINSKIFAKULTET UNIVERZITETA U NIŠU
Štam pa M AŠINSKIFAKULTET UNIVERZITETA U NIŠU,2019
Tiraž: 200

CIP - Каталогизација у публикацији - Народна библиотека Србије, Београд

620.9(082)(0.034.2)
502/504(082)(0.034.2)

INTERNATIONAL Conference on Thermal Science and Engineering of Serbia (19


; 2019 ; Sokobanja)
Proceedings [Elektronski izvor] / SimTerm 2019 - 19th International
Conference on Thermal Science and Engineering of Serbia, Sokobanja, Serbia,
October 22-25, 2019 ; [organised by] University of Niš, Faculty of
Mechanical Engineering in Niš, Department of Thermal Engineering and
Society of Thermal Engineers of Serbia ; [urednici Mirjana
Laković-Paunović, Mladen Stojiljković]. - Niš : Mašinski fakultet
Univerziteta, 2019 (Niš : Mašinski fakultet Univerziteta). - 1 elektronski
optički disk (CD-ROM) ; 12 cm

Sistemski zahtevi: Nisu navedeni. - Nasl. sa naslovne strane dokumenta. -


Tiraž 200. - Bibliografija uz svaki rad.

ISBN 978-86-6055-124-7

1. Mašinski fakultet (Niš). Katedra za termotehniku, termoenergetiku i


procesnu tehniku 2. Društvo termičara Srbije

a) Енергетика - Зборници b) Животна средина - Заштита - Зборници

COBISS.SR-ID 281110028

View publication stats

You might also like