XENONS

XENONS

User Manual
V1.0

Thank you for buying XENONS

· To make sure your operation is right and safe, please read this
manual carefully before use.

· Unauthorized copying or disseminating of this manual is illegal.

· The content of this manual including the product’s parameters are
subject to change without notice.

· Every effort has been made to ensure the accuracy of this manual,
so if you find anything wrong or being omitted, please contact us
immediately, and we will be very appreciate!

· XENONS company shall not be liable for any errors or for direct
or indirect incidental or consequential damages when use this printer.

· XENONS Company shall not be liable for any errors or for direct
or indirect incidental or consequential damages in connection with the
error operation.

XENONS Corporation
Statement
This product is A-class printer which may result in radio-interference,
when it happens, please take measures.
 Tables of contents
User instruction……………………………………………………………………...1
Safety instruction …………………………………………………………………...2
Labels on printer ………………………………………………………………. .….5
Package contents………………………………………………………………….....7
1.Accessories ……………………………………………………………………....7
2.Printer assembling……………………………………………………………… .8
3.Assemblage precaution ………………………………………………………… 11
4.Cartridge installation…………………………………………………………… 13
Parts name………………………………………………………………………… 16
Cartridge Order …………………………………………………………………..18
Operation panel ………………………………………………………………..... 19
Preparation for operation ………………………………………………………… ..20
Print quality ………………………………………………………………… ...21
Printhead cleaning………………………………………………………. ... .......... 22
Test …………………………………………………………………... .24
Pause print…………………………………………………………….................... .26
Cancellation……………………………………………………………………… . .26
Shortcut key operation……………………………………………………………. ..27
Print head adjustment…………………………………………………………… .....28
Di-direction adjustment………………………………………………………….....33
Double head position calibration.……………………………………………...........35
Maintenance ………………………………………………………………………. 38
1.Change cartridge……………………………………………………………….....39
2.Handle waste inks …………………………………………………………… .......40
3.Cleaning…………………………………………………………………………... 41
Menu list and directions…………………………………………………………...... 42
User instruction

Recommendation for computer configuration

Hardware:
CPU: 2.50GHZ
Memory: 2.00GB
Mother board: P321-ES3G
Chipset: INTEL

Software:
WINXP-SP2
MICROSOFT WINDOWS XP PROFESSIONAL

1
Safety introduction
Marks of warning and caution

to warn the user that deformity，serious injuries or death may caused if

any wrong operation.

to warn the user that injuries my caused or things may be damaged if any
wrong operation.

* Damage means to damage your furnishing, decoration,animals, pets or

others.

Various marks

to remind user of important notes or warnings. Its concrete meaning depends on the figure
in it. The mark on the left means: danger of electric shock.

means never do such things, its concrete meaning depends on the figure in it, the mark on
the left means never to disassemble.

to remind user of things that must to be done. Its concrete meaning depends on the figure in
it, the mark on the left means plug must be pulled out from the socket.

Can not be disassembled,repaired or Please use the power with the Rated value
refitted. which labeled on the printer.
Otherwise it may cause fire or other
damage.

Earthing by using ground wire. When it is in error state, do not use any other
power supply which may cause fire or electric
Otherwise electric shock may be caused. shock.

Please use the power cord supplied by us

only. If using other nonstandard power
cord may cause fire or electric shock.

2
Do not use this printer under the following Do not put cartridge, cleaning solution or
environment: open fires,electric spark, static waste inks under the following environment:
electricity,high temperature or any place close to open fires, high temperature，any
close to heat. Otherwise it may cause fire. place close to heat，or close to bleacher,
chemicals or inflammable and explosive
materials, otherwise it may cause fire.

Keep your working environment well Do not drop any ink or cleaning solution on
ventilated. Otherwise it may affect your health your skin or eyes. Do not eat, drink, smell the
or cause fire. ink and cleaning solution. All these behavior
are harmful to your health.

If the ink or cleaning solution is splashed into If ink or cleaning solution is splashed into
your eyes, wash your eyes immediately with your skin, please wash your skin with
plenty of water at least 15 minutes and get water or soap immediately and get medical
medical attention. attention.

If you feel bad while smell the ink or solution,

please go to the place where is well ventilated.
Get medical attention immediately if you have If feel dizzy or blurred, please get medical
any ink or cleaning solution by mistake. attention immediately.

Collect the waste ink via our waste-ink- Keep the cartridge away from children.
collecting container.

The fire or illness may caused if waste ink

leak or evaporate.

Do not use broken or loose plug or power supply Do not pull in or pull out the plug while your
which may cause fire or electric shock. hands are wet. Otherwise fire or electric shock
may occur.

3
Do not damage the power cord otherwise fire or When pull out the plug please seize hold of
electric shock may occur. the plug not the power cord, otherwise plug
might be damaged and fire or electric shock
may occur.

Suggest at least 4 people should take part in

Keep it away from liquid, metal or inflammable
the process of tearing-off package, assembling
materials as all these things might cause fire.
or moving the printer. Otherwise the printer
mightl fell off or broken.

Install it on the flat floor to avoid roll falling off Fix this printer on its stand via connecting nut
or damage. to avoid roll falling off or damage.

When put the printer on its stand please mind Please untangle the lock of castor first when
your finger. you move printer,otherwise the printer might
fall down.

Roll should be positioned on its predetermined Do not put your hand in printer during printing.
place. Otherwise the roll may fall off.

4
Labels on printer
All the labels are on the surface.
Below pictures will tell you their position and contents.

Cartridge

Keep the ink and waste ink away from open

flame.

Ink and waste ink are poisonous,so please

keep them away from human body and
use them under the environment of well
ventilated.

Do not disassemble the cartridge.

Keep cartridge away from children.
Do not keep the cartridge under extrem temperature, neither too
high nor too low.
Only support the water-based inkjet printer.
Do not use it on the other printer which is not the water based
type.

Inner outlook of front cover

Mind your finger when close cover.

5
 Inner outlook of front cover

The carriage will stop for emergency when you open the cover
during printing. If you want to stop printing, please press
“PAUSE” .

Do not put your hand in printer during

printing.

Keep the ink and waste ink Ink and waste ink are poisonous, so please keep
away from open flame. them away from human body and use them under
the environment of well ventilated.

Label of product name,

model and rating value.
Supplying with rating
power.

Do not insert other kinds of ink cartridge.

Additional marks:

Notice: Providing you the info to prevent printer failure and ensure right operation.

:Offer you the skills and suggestions during operation.

6
Package content

1 Accessories

Accessories checking

Hexagon wrench(M6) Nuts (big): several

Power cord：1 USB (to assemble stand) （To assemble stand）

Disk：1 Encryption Lock：1 R spring：2 Damper：1/2

MICO
LOR

Left/right leg stabilizer Paper holder

RIPsoftware：1 Cartridge：4/8
：2 installtion base：2

waste-ink-collecting
media holder; 2 set Funnel：6 User manual：1
bottle ：1

Feeder:1 pair Clamp : 2 piece

7
2 Printer assembling

Suggest at least 4 people take part in the Do not put your hand in printer during printing.
process of tearing-off package, assembling
or moving the printer. Otherwise the printer
might fell off or broke.

Fix this printer on its stand via connecting nut

to avoid roll falling off or damage.

NOTICE Do not hold the positions which pointed Left Right

in the right picture as it might cause
damage to printer.

Assemble the stand first and then install the printer on it.
The printer size is as below after completely assembled.

2500mm[W]x758mm[D]x1241mm[H] (98-7/16in.[W]x29-7/8in.[D]x48-7/8in.[H])

Invert the stand and install the

1 casters. 3PCS
3PCS

Tighten the screws up. 2PCS

2PCS

4PCS

4PCS

8
 After stand installation finished, put the printer on it.
2 Shown as the following figure.

·Align the rear edge of printer

with the fixed device of stand.
Front

Fixed the printer on its stand with screws.

3

3 screws on left and

right respectively

rubber gasket

screws（big size）

4 Install the waste ink collecting box as the following figure.

Fix the waste-ink-collecting box on the stand with the

small screws.

9
 Install the waste ink collecting box
5 directly on the device ,lower right
side of printer.

Do not take it off except moving

printer or pouring the waste ink.

We offer an extra waste ink collecting box for temporary collecting waste

10
3 Installation precaution

CAUTION

Suggest at least 4 people should take part in Install it on the flat floor to avoid falling
the process of tearing-off package, assembling down or damage.
or moving the printer. Otherwise the printer
might fell off or break.

NOTICE Make sure the waste ink collecting box has been fixed before power on.

Use it under the following environment:

· Temperature:15 to 35℃(59 to 98℉),Humidity:35 to 80%（non-condensing）
· Temperature:5 to 40℃(41 to 104℉),Humidity:20 to 80%（non-condensing）

Never keep printer in the following place:

· Uneven ground；
· Place with electromagnetic interference；
· Place of dust；
· Place where is not well ventilated；
· Place where is shaking；
· Place of strong light or of direct sunlight.

Do not stand on the stand or it will be damaged.

Do not press hard on printer or it will be damaged

11
CONNECTION

Please use the power with the Rating value Earthing by using groundwire, otherwise electric
which labeled on the printer. shock or mechanic failure may occur.

Please use the power cord equpped only. If

using other nonstandard power cord my cause
fire or electric shock.

NOTICE Please make sure the power of computer and printer are off before connecting cables

Please make sure the cables will not loose, if not, the printer may not work

Put all the cables away and make sure they will not trip the people.

Side view

USB interface

Power interface

12
4 Cartridge installation

Keep it away from liquid, metal or inflammable Do not put cartridge, cleaning solution or waste
materials as all these things might cause fire. inks under the following environment: close to
The same with printed paper which is not dry. open fires,hight temperature，any place close to
heat,or close to bleacher,chemicals or inflammable
and explosive materials, otherwise it may cause
fire.

Keep your working environment well ventilated. Do not drop any ink or cleaning solution on
Otherwise it may affect your health or cause your skin or eyes. Do not eat, drink, smell the
fire. ink and cleaning solution. All these behavior
are harmful to your health.

Keep the cartridge away from children.

NOTICE Please use the ink supplied by us! Do not try to fill ink into the empty cartridge.

Except for transport, please do not take off the cartridge.

Do not tear off cartridge.

The optimum conditon and storage temperature is 15~25℃, avoid direct sunlight. If printing under the
environment that is below 5℃ or above 30℃, the print quality will be reduced.

If ink stored in the place where is too cold or too hot for a long time, please place it at ordinary temperature
for at least 24 hours until it is in the ordinary temperature. Do not try to heat it or cool it otherwise its print
quality will be reduced.

Please wear prevention tools like plastic gloves, preventional glasses when doing any repairs whenever
possible to touch inks.

Keep inks away from children. Waste ink should be handled properly otherwise it might cause
environment pollution or damage to health.

Please do not use the cartridge if it fell off because any shake might damage it

Please be careful when install or take off the cartridge.

Do not take off the cartridge randomly, if it is not used up. Because the air may come into the ink pipe to
cause missing color and reduce the print quality.

13
 NOTICE Please use our exclusive ink to make sure great printing quality

1 Turn on the main power switch which is on the right hand of printer.

2 Connect the electric wire, USB wire, and install the driver.

3 Please make sure the waste ink collecting box has been assembled.

4 Cleaning solution needed when you install or reinstall cartridge.

Cartridge slot

8 color Llk Lk Lm Lc Y M C K

dual 4 color Y Y M M C C K K

Y M C K Insert cleaning solution in the corresponding

4 color color shown in the figure.

14
 ink

Insert cartridge in the corresponding color

that shown in the cartridge slot.

eg：4color
Y M C K

Yellow Magenta Cyan Black

5 Press CELANING button on the panel ,choose INKFILL, press

enter the surface, then press ENTER to start filling.
to HEAD CLEANING
INKFILL START

6 Press ENTER again to stop filling. HEAD CLEANING

INKFILL STOP

Change a new waste ink collecting box after ink filling finished. Then press,[ ] the whole
7 process of ink installing is done.

15
Parts name

Front view

NOTICE If print head keeps exposed to the air for a long time, the head will be blocked and might cause
irreparable damage.

When carriage is not in the maintenance point, please press ORIGIN to get it back to original position
automatically.

Do not touch guide way or put your 1 Guide rail (guide rail of carriage, keep it clean and
hand into the right box except adjusting remember to lubricate it regularly)
head height.
Do not touch the area which is shown
on the left figure, it might make your
hands dirty with ink or make the print
quality reduced.

Do not put your hand into it

2 Front Cover
The carriage will immediately stop if opening the
cover while printing

operation panel

paper loading rod

Waste ink collecting box (collecting

waste ink when cleaning

16
Rear view
USB interface (For connecting PC, and please protect it from
dust for daily use)

Main switch
Power supply interface

Paper Roller (For the purpose of keeping paper moving smooth, as well, pls keep the roller clean)

Notice：if there is abnormal circumstances like abnormal noise, please contact your local agent or
log-in our company website for consultation. Do not try to handle it by yourself, or you must suffer
the consequences.

17
Cartridge Placement

Cartridge slot

cartridge placement order:

4 color cartridge placement order:

Dual 4 color cartridge placement order:

8 color cartridge placement order:

18
Operation panel

Display
Multi-optional
setting

19
Preparation for operation

After operating the printer,it shows ready

READY
BP 0mm BI-DIR

Base point Value Bi-direct

Base point setting

NOTICE Before printing，set the base point position with the button ,press key of [BASE POINT]to
confirm the start ，the screen displays the coordinate value.

Left and Right Key decides the carriage position, Up and Down Key responsible for media going forward or
back.

Up

Left Right

Down

Press ORIGIN and carriage will back to its original position

automatically.

20
Print quality
ECLOSION TYPE PICSPACE
Print direction ECLOSION NONE Picture space
BI_DIRECTION(default) No eclosion Set the distance between
Bidirectional print picture and picture
Print head will print whether it moves ECLOSION TYPE1
to right or to left. Strong Eclosion
Print speed is faster than uni-directional Print media
print. ECLOSION TYPE 2 PP/Photo Paper/Light film/
Medium strength Eclosion Vinyl/Flex/Other
UNI_DIRECTION Choose the right media
Unidirectional print ECLOSION TYPE 3 before printing, path can be
Print head will print only when it Weak Eclosion saved
moves from right to
left. Eclosion capable of eliminating banding Overwrite
Print quality is better than bidirectional usually choose 1
print.

1.Press[PRINT QUALITY] 2.Press to make direction，ENTER it

PRINT QUALITY
PRINT QUALITY ENTER
BI_DIRECTION

3.Button into ECLOSION interface，with

4.Button into print margins setting.

to make choice then ENTER.

QUALITY QUALITY
ECLOSION NONE ENTER ENTER
PICSPACE 0mm

5.Press into print media setting ,with

6.Press into print overwrite setting ,with

to make choice then ENTER. to make choice then ENTER.

MEDIA MEDIA
PP ENTER PP ENTER

21
 Printhead cleaning

Start to clean Test print Ink filling Flash jet

START Test the statement of INKFILL START PASSNUM
Start to clean printing Start to fill ink Set the frequency
INKFILL STOP of flash jet
Stop ink filling

1.Press [CLEANING] to display the cleaning interface, use to make the choice of [START]/[TEST

PRINT]/[INKFILL START]，Press [ENTER]to confirm ，press back.

HEAD CLEANING HEAD CLEANING

START WORKING 10%
ENTER
10%indicate the processing

2.Press [CLEANING] to display the print interface, use to make the choice of B/C，Press

[ENTER]to confirm ，press back.

ENTER

Please clean the head, if there are phenomenons like missing color which affect print quality.

3.Press into inkfilling interface, press [ENTER] to fill autmatically, press [ENTER] again to stop.

HEAD CLEANING HEAD CLEANING

INKFILL START ENTER INKFILL STOP

4.Press into flash jet setting interface to set the frequency.

AUTO CLEANING
PASSNUM 10 ENTER

22
4.Select Inkfill, press to access inkfilling interface . Press[ ENTER] to Start, then press [ENTER]

to stop. After ink filling , it will go into cleaning interface automatically. press to exit the inteface

CLEAN
INKFILL START INK 100%
ENTER TIMELEFT 00：00：00
INKFILL 00：00：30
CLEANTIM 00：01：10
TOTAL 00：01：10

.After pressing ENTER to stop ink filling , it will go into cleaning surface automatically

5.Select TEST_PRINT press[ ] to access printing test interface, press[ENTER] to start printing test, press[ ]

to exit the interface.

Please clean the head, if there are phenomenons like missing color which affect print quality.

6.Select TEST_MODE,press[ ]to enter printing mode choice,. Use and to select B_MODE and

C_MODE. Confirm it by pressing [ENTER]. Press to exit.

TEST_MODE
ENTER
MODIFY B_MODE

23
Test
1.Test the print quality before print. Adjust it according to print state
diagram.

Menu
1.Set print paper and print direction before print and make alignment via test print.
Press [MENU] on the panel and make its related settings.

Print quality depends on print mode, please select the right print mode which can
meet with your requirements.

SHEET TYPE ALIGNMENT

OPEN: BIDIRECTION
OPAQUE: TEST PRINT:
ADJUST:
to set the bidirectional deviation

L-ADJUST:
to set the light adjuts on bidirectional
deviation. The L-ADJUST'S pecision can be
available of 1/8 of ADJUST.

HEAD ADJUST MEDIA

HORIZONTAL: CALIBRATION
be realized by horizontal test MEDIA:
print. PP/Photo Paper/Vinyl/FIex/Other
VERTICAL:
Be realized by vertical test
print.

TEMPERATURE SETTING SYNCHRONIZATION PARAMETERS

TEMPERATURE: PARAM SETTING：

SaveParam
LoadParam
FAN SETTING
FAN SETTING:
Press to set

24
1.Press [MENU to enter, press make the choice，press to enter into the submenu as you want，

with to confirm the choice of the list.

MENU
MENU SHEET TYPE

2.Press to enter [SHEET TYPE]，press again to make the choice of OPEN/OPAQUE，press

[ENTER] to confirm and back to previous menu ，then choose [OPEN].

SHEET TYPE
OPEN OPAQUE ENTER

3.Press into [BIDIRECTION] submenu interface, press to make choice，press

to enter then press [ENTER]to confirm, press to be back.

MENU BIDIRECTION-------1
BIDIRECTION TEST PRINT B

4.Into [HEAD ADJUST]submenu list，press to make the choice of print head adjust，press

to be back.

HEAD ADJUST
HORIZONTAL

5.Into [TEMPERATURE] submenu list, press to make the choice of temperature of front/

middle/back.
T 41 50 50
45 OFF OFF ENTER

6.Into [FAN SETTING] sbumenu list, press to make the fan setting.

FAN SETTING
HIGHT ENTER

7.Into[PARAM SETTING]submenu list,press to save or load parameters.

PARAM SETTING
SAVAPARAM ENTER

25
2.When printing，by pressing [MENU]to adjust feeding step and temperature.

ADJUST TEMPERATURE
By pressing to adjust By pressing to adjust

1.Button[MENU] into its interface 2. Press to enter the temperature setting

By pressing to make the choice beteween interface,press to set and press ENTER to confirm.
the step adjust and temperature setting.Press
to set the value ,press ENTER to confirm.
T 58 16 18
MENU-VERT OFF OFF OFF
ADJUST +0

26
 Pause print

NOTICE
While printing, please press PAUSE to stop temporarily. Press PAUSE again to return printing.

If you pause print, then the print quality will be different compared to the original one. So avoid pausing
print.

Press PAUSE key to Return to print by pressing

pause print. PAUSE key.

PAUSE PAUSE

Cancellation

NOTICE
Press “CANCEL” to cancel print command while printing, and screen will display “READY” until the
carriage stop.
When pressing CANCEL in the state of READY, the pipe cleaning function will start.
Printing will not recover if press CANCEL to abolish the printing task.

When printing,press CANCEL to stop

immediately.

CANCEL

When in the state of READY, press CANCEL

to start pipe cleaning function.

CLOSE MACHINE
YES/NO
CANCEL CANCEL
Press CANCEL in the state of After finishing pipe cleaning, press ENTER
READY, the carriage will leave the to turn off the cleaning function .
original place, as well ,cleaning work
will start. Pour cleaning solution into
cap of service station to clean the pipes

27
Print head alignment

[Head alignment]
To make sure great print quality, please do the head alignment.
Strips will appear while printing if head alignment is not done, and print precision will also
be reduced.
USB cable should insert in back of the computer not the front.

1 Take off front cover. Front Cover

2 Take off carriage cover. CARRIAGE COVER

3 Adjust the screw of both side of printer, keep

the height of printhead line up with platform.
screws

28
4 Loosen the screw fixed the bottom of carriage,
confirm the position of printhead by adjusting the
carriage bottom up and down.

5 Move regulating rod to adjust print head to

a suitable print height, the highest is 2.6mm
,and the lowest is 1.6mm.

6 Turn on printer and access to [ADJUST]

[MENU]

MENU
ADJUST

[VERTICAL ADJUSTMENT] MENU

HEAD ADJUST
7 Choose VERTICAL under the menu of
[HEAD ADJUST]. Press , then press
ENTER.
HEAD ADJUST
VERICAL

VERICAL
TEST PRINT B

29
8 Test result as shown in the right picture
will appear in the adjust.ment.

HEAD1

HEAD2

9 Loosen the fixing screw of printhead with

1,2,3 as marked in the right picture, adjust
the pritnhead to keep lines of each color at
the same line.

1 2 3

Notice:
If upper line is on the right side of lower line, raise
the inner side of printhead.
If upper line is on the left side of lower line, raise the
outer side of printhead.

Print text result again until head is

10 adjusted well.

30
11 After vertical adjustment, please print a
horizontal test to testify. The upper part and the
lower part should be connected upright. Also
both the magenta and black should be aligned.

12 S e l e c t [ H O R I Z O N TA L T E S T P R I N T ] MENU
under the menu [HEAD ADJUST], press [ ] HEAD ADJUST
first,then[ENTER].

HEAD ADJUST
HORIZONTAL

HORIZONTAL
TEST PRINT B

13 Test result like the right part will be

shown.

31
 Press [TEST], the test print will be showed as
14 the right picture .

15
Loosen the screws fixed the right side of
print head, and adjust head position with 1,2
marked in the right picture, in order to make
no overlap or gap in the test print.

1 2

*Reference*
when it happens with overlap on the left and gap on the right, loosen No.1, and fasten No.2
when it happens with gap on the left and overlap on the right, fasten No.1, and loosen No.2

overlap gap

32
Double direct adjustment
* This operation is only available when you choose “BI_DIRECTION” under PRINT QUALITY.
To regulate the offset of bidirectional print.
This operation is prerequisite if printing material is changed, or head height is adjusted, or the driver has
reinstalled.

1.Press MENU and , , select BI_DIRECTION.

MENU
MENU BIDIRECTION

2.Press[ ] into BI-DIRECTION submenu interface

BIDIRECTION-------1 Into TEST PRINT interface mode B indicate vertial print;mode

TEST PRINT B C is horizontal print.

3.Press ENTER and print will test print.

Test result
Current value

7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 o n 2 1 +0- 1 2 3 4 5 6 7 8 9

Value of no deviation.

4.Check the test result on the right and choose a value of no deviation. Pay attention to “+”, “-” , the value of
no deviation above is “+2”

5.Press[ ]to enter the interface of BIDIRECTION ADJUST, then press[ ] to enter initial adjust interface.
BIDIRECTION-------1
ADJUST +7

33
6.USE and to add the value quoted in the 4th step into the current value, then press ENTER

to confirm .

BIDIRECTION-------1 BIDIRECTION-------1
ADJUST +7 ADJUST +9 ENTER

7.Repeat step 2 to carry out print test.

Test result
current value

7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 +0- 1 2 3 4 5

Head1-Head2(R-L)
Value of no deviation

8.Check printing test result on the left side and select one value without deviation

9.Press[ ]to access modify interface.

BIDIRECTION---------1
L_ADJUST 3/8

10.Use[ ], [ ] to revise the value in the 8th step, and press [ENTER] to confirm.

BIDIRECTION-------1
L_ADJUST 0/8 ENTER

11.Press [ ]twice to go back to the interface of 1st step, and go on LEFT_RIGHT adjustment, same

procedure as RIGHT_LEFT

34
 DOUBLE HEAD POSITION ADJUSTMENT
* Double print head position adjustment only available for 2 head machine.
2 head need to be overlapped from left to right, right to left, front to back when doing
the calibration.
This operation must be done after adjusting the height of head, or reinstalling driver

1.Press[MENU], use[ ]to select HEAD1-HEAD2,press[ ]to enter,use [ ]to select the mode from left to right
or the right to left.

HEAD1-HEAD2(RL)
MENU TEST PRINT B

2.Press[ ] to select the mode from right to left, Press[ ]to access to sub-menu of RIGHT_LEFT, prss
ENTER to print.

HEAD1-HEAD2(RL)
TEST PRINT B ENTER

3.Press[ ]to access to test print interface, press[ENTER]to start.

test result

current

7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 +0- 1 2 3 4 5 6 7 8 9 10

value with no deviation Head1-Head2(R-L)

4.Check the right side of test print, and choose a value with no deviation. Pay attention to "+", "-". In this
case, the value with no deviation is "+1"

5.Press[ ]to exit test print，press[ ] [ ] to select ADJUST，Add the value in the 4th step.

HEAD1----HEAD2(RL) HEAD1----HEAD2(RL)
ADJUST +0 ADJUST +1

35
6.Back to step 2 , step 3, then start test print.
test result

current value

7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 +0- 1 2 3 4 5 6 7 8 9

value with no deviation Head1-Head2(R-L)

7.Check the result on the left , and choose a value with no deviation.

8.Press[ ]to accessL_ADJUST interface,press[ ] [ ]to overwrite the value in step 8.

HEAD1----HEAD2(RL) HEAD1----HEAD2(RL)
L-ADJUST +1 L-ADJUST +2

9.Press[ ]to make the process from LEFT_RIGHT, as the same with RIGHT_LEFT..

10.Press[ ]to access OVERLAP interface, press[ ] to access the submenu list.
OVERLAP
TEST PRINT B

36
11. Press ENTER to start.
Test result

value of no deviation

12.Check the result of printing test and select the value without shadow .Value“1” above meet the standard.

13.Use[ ] to choose ADJUST , to overwrite the valve in the 14th step, and press[ENTER]to confirm.

OVERLAP 35 OVERLAP
ADJUST +2 ADJUST +1 ENTER

37
Maintenance

Change cartridge

Do not use this printer under the following Do not put cartridge, cleaning solution or waste
environment: open fires, electric spark, static inks under the following environment: close
electricity, high temperature or any place to open fires,high temperature，any place
close to heat. Otherwise it may cause fire. close to heat,or close to bleacher,chemicals or
inflammable and explosive materials, otherwise
it may cause fire.

Keep your working environment well Do not drop any ink or cleaning solution on
ventilated. Otherwise it may affect your health your skin or eyes. Do not eat, drink, smell the
or cause fire. ink and cleaning solution. All these behavior
are harmful to your health.

Keep the cartridge away from children.

NOTICE Only use the ink supplied by us! Do not try to fill ink into the empty cartridge.

Except for transport, please do not take off the cartridge.

If ink used up please change to a new cartridge with the same color and same type immediately. If take
off the cartridge please install a new one immediately.

Do not tear off cartridge.

Ink should be stored under the environment of well ventilated, and keep its environment temperature
from -20 to 40℃(-4~104℉).

Any shake might damage the cartridge, so do not use it again.

Please handle with care when install or take off the cartridge.

Do not take the cartridge off until the inks used up. Because when cartridge took off from printer, the air may
come into the ink pipe, and print quality will be reduced.

38
NOTICE Only use the water-based ink.

1 Unplug the cartridge.

2 Insert a new cartridge.

INK

CARTRIDGE SLOT

39
Handle waste inks
Please handle waste inks as following steps when ink reaches the limit level of waste ink collecting box or
you need to move the machine.

Collect the waste ink via our waste-ink-

collecting container. The fire or illness may
caused if waste ink leak or evaporate.

NOTICE When take off waste ink collecting box please keep it vertical and do not shake, as it might spatter
out.

Waste ink can not be reused and it contains poisonous compositions. So do not burn or handle it as a
general rubbish.
Do not pour waste inks into sewer or river, otherwise it might cause environment pollution.

1 Turn off the power.

2 Take off the waste ink collecting box which is

full with inks.

3 Carefully handle it conforming

to your local law and rules.

40
Cleaning

NOTICE Before cleaning please turn off the main power switch and unplug the power cord first.
* Turn off the sub power switch first and then turn off the main power switch.

Do not add lubricating oil on mechanical parts.

Do not use solvent cleaning solution to clean. (Like gasoline or thinner)

Cleaning pressure plate regularly, because it will affect print quality if it is dirty.

Do not touch print head by hand or any other material.

Keep printer clean at any time.

Clean print head with our special cleaning cloth (or cleaning rod) and cleaning solution.

Do not clean or rub print head surface with any materials which might cause irreparable damage.

Cleaning printer body

Cleaning printer body carefully with wringed wet cloth. While clean operation panel or display screen with
dry and soft cloth.

Cleaning pressure plate

Cleaning pressure plate carefully with wringed wet cloth.

Cleaning grinding wheel

Clean up the dust and impurities with brush. Clean it in horizontal direction while rolling it.
The dust might block the material moving.

Cleaning paper pressing wheel

Cleaning it carefully with wringed wet cloth.

Cleaning reflection bar

Cleaning it carefully with wringed wet cloth.

Cleaning front cover

Cleaning it carefully with wringed wet cloth

41
 Menu list and directions
Menu list and directions
Press PRINT QUALITY to enter print mode.

Main menu Submenu Function Setting range Default

PRINT BI_DIRECTION Set print direction,it has two BI_DIRECTION/ BI_DIRECTION

QUALITY options,one is unidirectional,the other is UNI_DIRECTION
bidirectional.
Bidirectional print
Print head will print whenever it moves to
right or to left.
Unidirectional print
Print head will print only when it moves
from right to left.

ECLOSION Set eclosion type ECLOSION ECLOSION

NONE 3 options: NONE/ NONE
Eclosion none/Eclosion type1/ ECLOSION
Eclosion type2 TYPE1/
Eclosion type1 ECLOSION
Bottom up at the boundary of eclosion.This TYPE2
eclosion is gradually
changed
Eclosion type 2
The eclosion area is of a crest shape.Bottom
up at the boundary of eclosion.This eclosion
is gradually changed

PICSPACE Set the distance between picture and paper. PP/Photo Paper/ PP
Light Paper/Vinyl/
MEDIA Set the type of print media. Flex/Other

OVERWRITE

Press HEAD CLEANING and enter print mode

Main menu Submenu Function Setting range Default

HEAD START Enter into clean state and start

CLEANING to cleaning by pressing ENTER,then
cleaning prcess will be displayed with
percentage.

TEST_PRINT Press ENTER to start test print, When

it happens with missing color, go back
to the menu of START to clean until test B/C B
print is desirable.

Press ENTER and fill ink automatically,now

INKFILL INKFILL INKFILL
the screen will display STOP,and it will
START START START
automatically stop when inkfill finished.
/INKFILL
STOP

42
Press MENU to enter print mode

Main menu Submenu Function Range Default

MENU SHEET TYPE Set paper type, open and opaque OPEN/OPAQUE OPEN

BIDIRECTION Set bidirectioanal deviation and make test

print, as well as make a light alignment print
which can be available of 1/8 ADJUST.

CALIBRATION Listing 3 submenu,PASSNUM/TEST PRINT/

ADJUST.

HEAD ADJUST Horizontal and vertical adjust. HORIZONTAL/ HORIZONTAL

VERTICAL

TEMERATURE Temperature setting，when below 25 degrees

centigrade，it displays OFF automatically.

FAN SETTING FAN POWER SETTING HIGH/MIDDLE/ HIGH

LOW

PARM SETTING Optional for save or load SaveParam/

LoadParam

43