Catalog Number

Notes Type

Petrolux® LED Low Bay Description

• For demanding environments with lower mounting heights
Mechanical (cont.)
• Robust cast aluminum housing with low copper content (0.6%
Wet Location for Demanding Environments where dust, dirt and moisture are a concern. CU content) withstands harsh or hostile environments.
• Certain airborne contaminants may adversely affect the • Universal mount high profile top cover (ceiling/pendant).
PXLW functioning of LEDs and other electronic components,
depending on various factors such as concentrations of the
Optional universal arm available for wall/stanchion. Other
mountings include, low profile hook/pendant mount and high
contaminants, ventilation, and temperature at the end-user profile yoke mount.
location. Click here for a list of substances that may • Precise number of fins dissipate maximum amount of heat.
not be suitable for interaction with LEDs and other • Universal mount can be wall, stanchion, and angle mounted to
electronic components. accommodate a variety of arms.
Optics Listings
• Prismatic borosilicate glass directs light where needed and • UL listed to meet US and Canadian standards.
reduces harsh glare. • Suitable for use in wet locations.
• Silicone rubber lens available that will not brown, chip, shatter • -40°F (-40°C) to 149°F (65°C) ambient temperature rating. (see
or break. chart on page 9)
• Four distributions (Type 5 low angle, Type 5 high angle, type • IP65, IP66 and IP67 rated. (see Option Value Ordering
4 forward throw and Type 1 long and narrow) available to Restrictions & Notes on page 3)
maximize versatility. • 1G vibration rated.
• Highly engineered LED system ensures superior uniformity and • Marine rated (see chart on page 9)
maximizes spacing. • NEMA 4X rated (see chart on page 9)
• Lens assembly secured by stainless steel tamper-resistant Torx® • NSF Splash Zone 2 and Non-Food Zone rated with FPA option.
T-20 screws. • IK rated (see chart on page 6)
• DesignLights Consortium® (DLC) Premium qualified product.
Electrical Not all versions of this product may be DLC Premium qualified.
• Luminaire Surge Protection Level: Designed to withstand up to Please check the DLC Qualified Products List at www.
10kV/5kA per ANSI C82.77-5-2015. designlights.org/QPL to confirm which versions are qualified.
• 0-10V dimming driver is standard. Dims to 10%.
• XVOLT is an optional robust driver solution designed to assist Buy American Act
with power quality issues and a dropped neutral in 277V input Product with the BAA option is assembled in the USA and meets
as derived from 480V Wye. Supports 277-480V; 6kV surge rated. the Buy America(n) government procurement requirements
• 3000K, 4000K or 5000K CCT available. under FAR, DFARS and DOT regulations. Please refer to www.
• Fault-tolerant LED light engine continues to provide light even acuitybrands.com/buy-american for additional information.
in the failure of one LED. Warranty
• Field Adjustable Output (AO) module - Onboard device that 5-year limited warranty. This is the only warranty provided
adjusts the light output and input wattage to meet site specific and no other statements in this specification sheet create any
requirements. The AO module is preset at the factory to position warranty of any kind. All other express and implied warranties
number 8 (see chart on page 6). are disclaimed. Complete warranty terms located at: www.
• Integrated Bluetooth occupancy sensor: The SBG BTP is acuitybrands.com/support/warranty/terms-and-conditions
bluetooth enabled with dimming photocells. Allows you to
change settings in the field using the VLP app. Note: Actual performance may differ as a result of end-user
environment and application.
Mechanical All values are design or typical values, measured under
• Super durable TGIC thermoset powder coat finish provides 1500 laboratory conditions at 25 °C.
hours salt fog rating. CR (corrosion resistant) optional finish is
a five-stage pre-treating and painting process that yields over
5,000 hours salt rating per ASTM B117.
Typical Applications Dimensions: Inches (millimeters) unless otherwise noted.
• Petroleum refineries • Water and wastewater Diameter: 13.11 in. (332.99 mm.)
• Ethanol facilities treatment facilities UNM Height: 11.43 in. (290.32 mm.)
• Chemical plants • Parking Garages PM Height: 10.48 in. (266.19 mm.)
• Power plants Weight: 19 lbs. (8.62 Kg.)
• Textile mills Pallet Quantity: 12 fixtures
EPA: .787 ft²

Capable Luminaire
This item is an A+ capable luminaire, which has been designed and
tested to provide consistent color appearance and out-of-the-box control
compatibility with simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’
specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® control
networks marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 1 of 10
Petrolux® LED
Wet Location for Demanding Environments

A+ Capable options indicated

by this color background.

ORDERING INFORMATION Example: PXLW 3000LM MDU5 MVOLT 30K 80CRI UNM DNXD

Series Lumens Distribution Voltage Color Temperature Color Rendering Index Mounting Options
PXLW 3000LM 3,000 FWD Forward throw, glass lens MVOLT Auto Sensing (120-277V, 50/60Hz) 30K 3000K CCT 70CRI 70CRI UNM Universal Mount,
lumens ‡ LND Long and narrow, glass 120 120V, 50/60Hz 40K 4000K CCT 80CRI 80CRI high profile top
5000LM 5,000 lens cap ‡
208 208V, 50/60Hz 50K 5000K CCT 90CRI 90CRI
lumens ‡ MD0 Medium glass lens with PM Pendant Mount,
240 240V, 50/60Hz low profile top
8000LM 8,000 minimal uplight
lumens 277 277V, 50/60Hz cap ‡
MDU5 Medium glass lens with
10000LM 10,000 uplight HVOLT Auto Sensing (347-480V, 50/60Hz) YK90 Yoke Mount 0-90
lumens Degree, high
MDU5FR Medium frosted glass lens 347 347V, 50/60Hz profile top cap ‡
with uplight 480 480V, 50/60Hz
SO Medium, silicone optic XVOLT Enhanced Power Protection
with minimal uplight ‡ (277-480V, 50/60Hz) ‡
SOLND Long and narrow, silicone 277X 277V XVOLT Driver, 50/60Hz ‡
optic ‡ 347X 347V XVOLT Driver, 50/60Hz ‡
WD Wide, glass lens 480X 480V XVOLT Driver, 50/60Hz ‡
125VDC 125V, DC Driver ‡
250VDC 250C, DC Driver ‡

Options Finish
Damp Location Cord Sets: ‡ Individual Non-Dimming Sensors: ‡ DBXD Black super
CPSB16W Cord with 15-amp straight blade plug, 16-gauge, 3 SBGR10 360° Low Mount Sensor, (8-15’ mounting heights), on/off occupancy (LINK) durable ‡
conductors, white, 6ft (120V only) SBGR10 P 360° Low Mount Sensor, (8-15’ mounting heights), on/off photocell (LINK) DGXD Gray super
CPTL16W Cord with 15-amp twist lock plug, 16-gauge, 3 durable
conductors, white, 6ft (120, 208, 240, 277, 277X only) Individual Dimming Sensor: ‡ DNXD Satin Nickle
CPTL20A16W Cord with 20-amp twist lock plug, 16-gauge, 3 SBGR10 D 3V 360° Low Mount sensor, (8-15’ mounting heights), high/low occupancy super durable ‡
conductors, white, 6ft (347, 347X, 480 or 480X only) dimming (LINK) DWHXD White super
durable ‡
Wet Location Cord Sets: ‡ Photocontrols:
CPTL16WWL Cord with 15-amp twist lock plug, 16-gauge, 3 BP Button style photo control, 120V-277V/347V ‡
conductors, white, 6ft (120, 208, 240, 277 or 277X PER NEMA twist lock receptacle ‡
only) PCS DTS, solid state photo control, 120V-277V ‡
CPTL20AWWL Cord with 20-amp twist lock plug, 16-gauge, 3 P34 DTL, solid state photo control, 347V ‡
conductors, white, 6ft (347 or 347X only) P48 DTL, solid state photo control, 480V ‡
PSC Shorting cap ‡
Wet Location Cords (no plug): ‡
CNP16WWL Cord only, 16-gauge, 3 conductors, white, 6ft nLight® AIR Wireless: ‡
CNP164CWL Cord only, 16-gauge, 4 conductors, black, 6ft ‡ NLTAIR2 RSBG10 nLight® Air Generation 2 enabled, 360° low mount sensor, (8-15’ mounting
CNP165CDWWL Cord only, 16-gauge, 5 conductors, includes 0-10V heights) (LINK)
dimming leads, white, 6ft ‡ *For 360° integral high mount sensors (15-30’ mounting heights), replace "10" in nomenclature
CNP165CDWL Cord only, 16-gauge, 5 conductors, includes 0-10V with "6". For 360° high bay sensors (40' mounting heights), replace "6" in nomenclature with
dimming leads, black, 6ft ‡ "40". Ex: NLTAIR2 RSBG6
NLTAIR2 RIO nLight® air Generation 2 enabled, fixture embedded, 0-10V dimming output
Hook: (LINK)
HKMW 3/4" wet listed hook male, PF-291 ‡
Bluetooth® Sensors: ‡
Emergency: SBG10 OCC BTP 360° Low Mount Sensor, (7-15’ mounting heights), on/off occupancy, utilizes
E10WMCP Power Sentry® PS1055MCP, 10 watt internal constant smart hub for Bluetooth® programmability (LINK)
power emergency driver, 5°C min, UL924 Compliant, SBG10 HL BTP 360° Low Mount Sensor, (7-15’ mounting heights), high/low/(off) occupancy
Certified in CA Title 20 MAEDBS (120-277) (LINK) ‡ dimming, utilizes smart hub for Bluetooth® programmability (LINK)
SBG10 ADC BTP 360° Low Mount Sensor, (7-15’ mounting heights), on/off occupancy with auto
Other Options: dimming photocell, utilizes smart hub for Bluetooth® programmability (LINK)
AO Field Adjustable Output, Standard setting is 8 ‡ SBG10 ANL BTP 360° Low Mount Sensor, (7-15’ mounting heights), high/low/(off) occupancy
BAA Buy America(n) Act Compliant dimming with auto dimming photocell, utilizes smart hub for Bluetooth®
CR Corrosion resistant paint programmability (LINK)
DL Damp location ‡
Mounting Accessories:
EMD Ingress/Egress Marker Decal
072331 Substation arm for a single luminaire, up or down orientation. ‡
FPA Food processing area ‡
072331CTL Substation arm for a single luminaire with integral sensor, up or down
NSG Non silicone gasket (EPDM) ‡ orientation. ‡
PC Pendant cone ‡ 072332 Substation arm for two luminaries, up and down orientation. ‡
UPS Uplight Shield ‡ 072332CTL Substation arm for two luminaires (one with a sensor and one without), up and
WGX Zinc coated wire guard, factory installed down orientation. ‡
P3US Universal arm for wall or stanchion mount ‡
P3US35 35° Universal arm for wall or stanchion mount ‡
For Accessories and Footnotes, see next page.

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 2 of 10
Petrolux® LED
Wet Location for Demanding Environments

Accessories: Order as separate catalog number.

072331 XX Substation arm for a single luminaire, up or down orientation. XX denotes color ‡ P3US XX Universal arm for wall or stanchion mount, XX denotes color ‡
072331 CTL XX Substation arm for a single luminaire with sensor, up or down orientation. XX P3US35 XX 35° Universal arm for wall or stanchion mount, XX denotes color ‡
denotes color ‡ PCPXLW XX Pendant Cone, XX denotes color ‡
072332 XX Substation arm for two luminaries, up and down orientation. XX denotes color ‡ PTASTA Stanchion Mount Bracket, White ‡
072332 CTL XX Substation arm for two luminaires (one with a sensor and one without), up and UPSPXLW XX Uplight shield, XX denotes color ‡
down orientation. XX denotes color ‡
WGPXLW Wire guard, zinc coated
HSCKX X inch safety chain kit ‡
MI3502 THREAD SEAL Thread Sealant ‡

‡ Option Value Ordering Restrictions & Notes

Option value Restriction
072331, 072331 XX Not available with YK90, cord or cordset. Requires PM or UNM mounting. Includes one 5 conductor input feed cable with 0-10V dimming. Not IP or NEMA4X rated. Wet
location rated.
072331CTL, 072331 CTL XX Not available with YK90, cord or cordset. Requires PM or UNM mounting. Includes one 3 conductor input feed cable. Not IP or NEMA4X rated. Wet location rated.
072332, 072332 XX Not available with YK90, cord or cordset. Requires PM or UNM mounting. Includes two 5 conductor cables for independent fixture control with 0-10V dimming.
Not IP or NEMA4X rated. Wet location rated.
072332CTL, 072332 CTL XX Not available with YK90, cord or cordset. Requires PM or UNM mounting. Includes one 3 conductor cable for the sensor to control both luminaires. Not IP or NEMA4X rated.
Wet location rated.
125VDC, 250VDC Not available with BP, PER, PCS, P34, P48, PSC photocontrols, or CPTL, CPSB cords which include plugs.
277X, 347X, 480X Not available with 3000LM or 5000LM or E10WMCP.
3000LM, 5000LM Not available with XVOLT, 277X, 347X or 480X.
AO Not available with individual dimming SBGR sensors, bluetooth SBG BTP sensors, nLight air RSBG sensor, nLight air RIO module, CNP165CDWL, CNP165CDWWL five conductor
cords or E10WMCP battery.
Bluetooth Sensors Not available with HVOLT in the 3000LM or 5000LM lumen packages. BTP sensor options with 3000LM or 5000LM lumen packages cannot dim to OFF. These lumen packages
will dim to 10% minimum and cannot be turned OFF with controls. Not available with XVOLT, 277X, 347X, 480X, AO adjustable output module, E10WMCP, CNP165CDWL,
CNP165CDWWL five conductor cords or any other controls. IP65 and IP66 rated. Not Marine or NEMA4X rated.
BP Must specify voltage. Not available with MVOLT, HVOLT, 480X, 125VDC, 250VDC, XVOLT, 480X, or YK90. Not Marine or NEMA4X rated.
CNP164CDWWL Requires E10WMCP battery option. Not Marine or NEMA4X rated.
CNP165CDWL, CNP165CDWWL Not available with AO adjustable output module, individual dimming SBGR sensors, bluetooth SBG BTP sensors, nLight air RSBG sensor, nLight air RIO module, E10WMCP battery
or HKMW hook. Not Marine or NEMA4X rated.
Damp Location Cord Sets Not available with 125VDC or 250VDC. Voltage must be specified. Requires DL and HKMW options. 6' is standard, but other lengths are available. Must specify length in the
nomenclature. Example: CPTL16W3FT. NEMA plug configurations: (CPSB) 120 = 5-15P. (CPTL16W) 120 = L5-15P, 208 or 240 = L6-15P, 277 = L7-15P. (CPTL20A16W) 347 =
L24-20P, 480 = L8-20P. Not Marine or NEMA4X rated.
DBXD, DNXD Not Marine or NEMA4X rated.
DL Required when damp location options are chosen. Luminaire is wet location listed only when ordered with wet location options. If luminaire is ordered with wet and damp
location options, luminaire is damp location listed only and will include a damp label.
DWHXD Not NEMA 4X rated.
E10WMCP Available with UNM or YK90 only. Not available with AO adjustable output, PM pendant mount, HVOLT, 347, 480, XVOLT, 277X, 347X, 480X, bluetooth SBG BTP sensors, nLight air
RSBG sensors, nLight air RIO, nLight air RPP20 ER or nLight wired NPP16 ER versions of the power packs . Available with individual dimming and non-dimming SBGR sensors.
Only available cord option is the CNP164CDWWL cord option, but not required. Not Marine or NEMA4X rated.
FPA SO or SOLND distribution and DWHXD finish required. Not available with YK90 mounting, E10WMCP battery or any external sensor or control. Not available with FWD, MD0,
MDU5, MDU5FR, LND, WD distributions, DBXD, DGXD, DNXD finishes, SBGR individual dimming and non-dimming sensors, SBG BTP bluetooth sensors, RSBG nLight air sensors or
nLight air RIO.
HKMW Requires Cord or Cordset. Not available with CNP165CDWL, CNP165CDWWL five conductor cords. Not IP, Marine or NEMA4X rated. Wet Location rated.
HSCKX X denotes length. Available in multiple sizes. Replace X with size in inches. Example: HSCK120 = 120 inches or 10 feet.
Individual Dimming Sensor Not available with XVOLT, AO adjustable output module or CNP165CDWL, CNP165CDWWLfive conductor cords. IP65 and IP66 rated. Not Marine or NEMA4X rated.
Individual Non-Dimming Sensors Not available with XVOLT. IP65 and IP66 rated. Not Marine or NEMA4X rated.
MI3502 THREAD SEAL Order one per luminaire, 6ml tube.
nLight Air Wireless Not available with HVOLT in the 3000LM or 5000LM lumen packages. nLight Air options with 3000LM or 5000LM lumen packages cannot dim to OFF. These lumen packages will
dim to 10% minimum and the fixture cannot be turned OFF with controls. Not available with XVOLT, 277X, 347X, 480X, AO adjustable output, E10WMCP battery, CNP165CDWL,
CNP165CDWWL five conductor cords, any other sensors or controls. IP65 and IP66 rated. Not Marine or NEMA4X rated.
NSG Not available with SO, SOLND distribution, any external sensors or controls. Not Marine or NEMA4X rated.
P34 Requires PER option. Not available with 125VDC or 250VDC. Available with 347, 347X options only. Not Marine or NEMA4X rated.
P3US35, P3US Not available with PM, YK90, cord or cordset. Requires UNM mounting. Not IP, Marine or NEMA4X rated.
P48 Requires PER option. Not available with 125VDC or 250VDC. Available with 480, 480X options only. Not Marine or NEMA4X rated.
PC, PCPXLW Not available with UNM or YK90. Requires PM mounting. Requires minimum 8" customer provided stem. Not available with FPA option. Not Marine or NEMA4X rated.
PCS Requires PER option. Not available with 125VDC or 250VDC. Available with MVOLT, 120, 208, 240, 277 or 277X options only. Not Marine or NEMA4X rated.
PER Not available with 125VDC, 250VDC or YK90. Not Marine or NEMA4X rated.
PM Not available with E10WMCP battery. Ships with 3/4" NPT pendant opening.
PSC Requires PER option. Not available with 125VDC or 250VDC. Not Marine or NEMA4X rated.
PTASTA Available with UNM or PM only. Threaded for 1.50-11.5 NPT (DN40) or slipfit for 1.50-11.5 NPT (DN40) conduit. Not IP, Marine or NEMA4X rated. Wet location rated.
SO, SOLND Not Marine or NEMA4X rated.
UNM Includes provisions for 3/4" NPT pendant mount and ceiling mount. When ordered with the optional P3US universal mounting arm, includes provisions for 1.5" NPT stanchion
mount and wall mount.
UPS, UPSPXLW XX Not available with FPA option. When paired with any sensor option, the viewing angle will be cutoff.
Wet Location Cords (no plug) 6' is standard, but other lengths are available. Must specify length in the nomenclature. Example: CNP16WWL3FT. Not Marine or NEMA4X rated.
Wet Location Cord Sets Not available with 125VDC or 250VDC. Voltage must be specified. Requires HKMW option. 6' is standard, but other lengths are available. Must specify length in the nomenclature.
Example: CPTL20A16WWL10FT. NEMA plug configurations: (CPTL16WWL) 120 = L5-15P, 208 or 240 = L6-15P, 277 = L7-15P. (CPTL20A16WWL) 347 = L24-20P. Not Marine or
NEMA4X rated.
XVOLT Not Available with 3000LM or 5000LM or E10WMCP.
YK90 When used with a sensor, not rated for wet location beyond 35 degree tilt. Not Marine rated.

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 3 of 10
 Petrolux® LED
Wet Location for Demanding Environments

DIMENSIONAL DATA
2X DIA 10.08mm (.397")
Mounting holes

3/4" NPT (with plug)

1" NPT (with plug)

1" NPT (with plug) 398.01mm

(15.67")

2X DIA 10.08mm (.397")

Mounting holes
(P3US ordered separately)
3/4" NPT (with plug)
1" NPT (with plug)

371.79mm
(14.64")
1" NPT (with plug)

1" NPT (with plug) 103.31mm

(4.07")

2X DIA 9mm (.358") 266.19mm 279.65mm

Mounting holes
(10.48") (11.01")
123.95mm Universal To Optic WGX Option
1 1/2" NPT (with plug) (4.88") Arm
Accessory 398.01mm
(15.67")

UNIVERSAL MOUNT (UNM and P3US) HOOK MOUNT (PM and HKMW)

WIRE GUARD OPTION (WGX)

1" NPT (with plug)

317.75 YOKE MOUNT 0-90° (YK90)

(12.51 ") 2X DIA 9mm (.358")
Mounting holes
123.95mm
1 1/2" NPT 45Ā
(with plug) (4.88")
1 1/2" NPT (with plug)
UNIVERSAL MOUNTING (UNM)

266.19mm
214.63mm (10.48")
( 8.45 ") To Optic

UNIVERSAL MOUNT (UNM and P3US)

2X DIA 10.08mm (.397")
Mounting holes
1" NPT (with plug)
(P3US Ordered Separately)
CEILING MOUNT (UNM)

PENDANT MOUNT (PM)

SENSOR OPTION (UNM and P3US) UPLIGHT SHIELD OPTION

(P3US Ordered Separately) (UNM, P3US, SENSOR and UPS)
(P3US Ordered Separately)

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 4 of 10
 56mm
284mm (2)
(11.19)
Petrolux® LED 155mm
Wet Location for Demanding Environments (6.12)
CEILING MOUNT BOX
WALL MOUNT BRACKET
DIMENSIONAL DATA (continued)

260mm
(10.25)
.750-14 NPT (DN20)
THREADED RIGID
CONDUIT ENTRY
(PENDANT ONLY)

THREADED FOR 1.50-11.5

NPT (DN40) OR SLIPFIT
FOR 1.50-11.5 NPT
(DN40) CONDUIT
PENDANT & BOX UNIVERSAL MOUNT (UNM and P3US35)
PENDANT CONE OPTION (PM and PC) ALTERNATIVE
(P3US35 Ordered STANCHION ARM (PTASTA)
Separately)
COVER MOUNT
UNIVERSAL MOUNT (UNM and P3US35)
PENDANT CONE OPTION (PM and PC) (P3US35 Ordered Separately)

WIRE GUARD OPTION (UNM and WGX)

WIRE GUARD OPTION (UNM and WGX)

UNIVERSAL MOUNT (UNM and P3US35)

PENDANT CONE OPTION (PM and PC) (P3US35 Ordered Separately)

522.48mm
(20.56")

072331 SUBSTATION ARM (PM) - UP ORIENTATION

WIRE GUARD OPTION (UNM and WGX)
522.48mm
(20.56")

522.48mm
(20.56")

072332 TANDEM SUBSTATION ARM, (PM)

07233-2-CTL-XX (Tandem Substation arm with controls)

072331 SUBSTATION ARM (PM) - DOWN ORIENTATION

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 5 of 10
Petrolux® LED
Wet Location for Demanding Environments

OPERATIONAL DATA

Performance with AO Field Adjustable Output Number of LED Boards and Drivers Used Impact Resistance (IK Ratings)
FAO Setting Base Max Lumen Output % Number of LED Number of drivers Lens Material Rating
Lumen Package boards per fixture per fixture
1 35% 3000LM 1 1 Glass IK07
2 48% 5000LM 1 1 Silicone IK10
3 61% 8000LM 1 1
4 74% 10000LM 1 1
5 87%
6 100%
7 100%
8 100%

Projected Lumen Maintenance (TM-21)

25C ambient
15,000 30,000 45,000 60,000 100,000
Lumen Package 0 Hours Hours Hours Hours Hours Hours

3,000LM 1 0.97 0.95 0.92 0.9 0.84

5,000LM 1 0.97 0.95 0.92 0.9 0.84

8,000LM 1 0.97 0.94 0.92 0.89 0.83

10,000LM 1 0.97 0.95 0.92 0.9 0.84

55C ambient
15,000 30,000 45,000 60,000 100,000
Lumen Package 0 Hours Hours Hours Hours Hours Hours

3,000LM 1 0.97 0.94 0.91 0.88 0.81

5,000LM 1 0.97 0.94 0.91 0.89 0.82

8,000LM 1 0.96 0.93 0.89 0.86 0.78

10,000LM 1 0.96 0.93 0.9 0.87 0.79

Default Bluetooth Sensor Programming

Occupancy Photocell
Model Default Operation Photocell Mode Low Trim High Trim Dim to Off Time Delay
Time Delay Set-point

SBG10 OCC BTP On/Off Occupancy Only 10 minutes Disabled n/a n/a 100% Disabled
SBG10 HL BTP Occupancy w/ 0-10V Dimming (High/Low/Off) 10 minutes Disabled n/a 10% 100% 2.5 minutes
SBG10 ADC BTP On/Off Occupancy with Auto Dimming Photocell 10 minutes On/Off & Auto Dim 50 fc 10% 100% 0 seconds
SBG10 ANL BTP High/Low/(Off) Occupancy Dimming with Auto Dimming Photocell 10 minutes On/Off & Auto Dim 50 fc 10% 100% Stay Dim/Never Off

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 6 of 10
Petrolux® LED
Wet Location for Demanding Environments

Operating Characteristics ‡
3000K 4000K 5000K
Lumens Distribution Input Watts ‡
70CRI 80CRI 90CRI 70CRI 80CRI 90CRI 70CRI 80CRI 90CRI
2848 2621 2166 2988 2726 2184 3110 2760 2201 Lumens
FWD 21
136 125 103 142 130 104 148 131 105 LPW
2698 2483 2053 2831 2583 2069 2947 2616 2086 Lumens
LND 21
128 118 98 135 123 99 140 125 99 LPW
3034 2792 2308 3183 2904 2327 3314 2941 2346 Lumens
MD0 21
144 133 110 152 138 111 158 140 112 LPW
3020 2780 2298 3169 2891 2316 3298 2928 2335 Lumens
MDU5 21
144 132 109 151 138 110 157 139 111 LPW
3000LM
2700 2485 2054 2833 2584 2071 2949 2617 2087 Lumens
MDU5FR 21
129 118 98 135 123 99 140 125 99 LPW
3182 2928 2421 3338 3045 2440 3475 3084 2460 Lumens
SO 21
152 139 115 159 145 116 165 147 117 LPW
2850 2623 2168 2990 2728 2186 3113 2763 2203 Lumens
SOLND 21
136 125 103 142 130 104 148 132 105 LPW
3098 2851 2357 3250 2965 2376 3383 3003 2395 Lumens
WD 21
148 136 112 155 141 113 161 143 114 LPW

3000K 4000K 5000K

Lumens Distribution Input Watts ‡
70CRI 80CRI 90CRI 70CRI 80CRI 90CRI 70CRI 80CRI 90CRI
4851 4465 3691 5090 4643 3720 5298 4703 3750 Lumens
FWD 35
139 128 105 145 133 106 151 134 107 LPW
4597 4230 3497 4822 4399 3525 5020 4456 3553 Lumens
LND 35
131 121 100 138 126 101 143 127 102 LPW
5169 4757 3932 5423 4947 3964 5645 5011 3996 Lumens
MD0 35
148 136 112 155 141 113 161 143 114 LPW
5146 4735 3914 5398 4925 3946 5619 4988 3978 Lumens
MDU5 35
147 135 112 154 141 113 161 143 114 LPW
5000LM
4600 4233 3499 4826 4402 3527 5023 4459 3556 Lumens
MDU5FR 35
131 121 100 138 126 101 144 127 102 LPW
5421 4988 4124 5687 5188 4157 5920 5254 4190 Lumens
SO 35
155 143 118 162 148 119 169 150 120 LPW
4856 4468 3694 5094 4647 3724 5303 4707 3754 Lumens
SOLND 35
139 128 106 146 133 106 152 134 107 LPW
5278 4857 4015 5537 5051 4047 5764 5116 4080 Lumens
WD 35
151 139 115 158 144 116 165 146 117 LPW

3000K 4000K 5000K

Lumens Distribution Input Watts ‡
70CRI 80CRI 90CRI 70CRI 80CRI 90CRI 70CRI 80CRI 90CRI
7750 7132 5896 8131 7417 5943 8463 7513 5991 Lumens
FWD 58
134 123 102 140 128 102 146 130 103 LPW
7344 6758 5586 7704 7028 5632 8019 7118 5677 Lumens
LND 58
127 117 96 133 121 97 138 123 98 LPW
8258 7599 6282 8663 7903 6333 9018 8005 6384 Lumens
MD0 58
142 131 108 149 136 109 155 138 110 LPW
8220 7564 6253 8623 7867 6304 8976 7968 6354 Lumens
MDU5 58
142 130 108 149 136 109 155 137 110 LPW
8000LM
7348 6762 5590 7709 7033 5635 8025 7123 5680 Lumens
MDU5FR 58
127 117 96 133 121 97 138 123 98 LPW
8660 7969 6588 9085 8288 6641 9457 8394 6694 Lumens
SO 58
149 137 114 157 143 115 163 145 115 LPW
7757 7139 5901 8138 7424 5949 8471 7519 5996 Lumens
SOLND 58
134 123 102 140 128 103 146 130 103 LPW
8432 7759 6414 8845 8069 6466 9208 8173 6518 Lumens
WD 58
145 134 111 153 139 111 159 141 112 LPW

Notes ‡
Input Watts 120 volts.
Operating Characteristics Absolute photometry calculated in accordance with IESNA LM-79-08 @ 25°C.

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 7 of 10
Petrolux® LED
Wet Location for Demanding Environments

Operating Characteristics ‡
3000K 4000K 5000K
Lumens Distribution Input Watts ‡
70CRI 80CRI 90CRI 70CRI 80CRI 90CRI 70CRI 80CRI 90CRI
9796 9014 7452 10276 9375 7512 10697 9495 7572 Lumens
FWD 74
132 122 101 139 127 102 145 128 102 LPW
9281 8541 7061 9737 8883 7118 10136 8997 7175 Lumens
LND 74
125 115 95 132 120 96 137 122 97 LPW
10437 9605 7940 10950 9989 8004 11398 10117 8068 Lumens
MD0 74
141 130 107 148 135 108 154 137 109 LPW
10389 9561 7904 10899 9943 7967 11345 10071 8031 Lumens
MDU5 74
140 129 107 147 134 108 153 136 109 LPW
10000LM
9287 8547 7065 9743 8889 7122 10142 9003 7179 Lumens
MDU5FR 74
126 116 95 132 120 96 137 122 97 LPW
10945 10072 8326 11482 10475 8393 11952 10609 8461 Lumens
SO 74
148 136 113 155 142 113 162 143 114 LPW
9804 9022 7458 10285 9383 7519 10707 9504 7579 Lumens
SOLND 74
132 122 101 139 127 102 145 128 102 LPW
10657 9807 8107 11180 10199 8172 11637 10330 8238 Lumens
WD 74
144 133 110 151 138 110 157 140 111 LPW

Notes ‡
Input Watts 120 volts.
Operating Characteristics Absolute photometry calculated in accordance with IESNA LM-79-08 @ 25°C.

Emergency Lumen Output Emergency Lumen Output Example - 10 Watt Battery

Approximate Approximate Approximate
How to Estimate Delivered Lumens in Emergency Mode Approximate Luminaire Lumens at 1 Lumens at 45 Lumens at 90
Use the formula below to estimate the delivered lumens in emergency mode Efficacy Minute Minutes Minutes
Delivered Lumens = P x LPW
P = Output power of emergency driver 100 LPW 1000 1000 1000
LPW = Lumen per watt rating of the luminaire. (See charts on page 7)
110 LPW 1100 1100 1100
The LPW rating is also available at Designlight Consortium
120 LPW 1200 1200 1200
P = 10 watts for E10WMCP
130 LPW 1300 1300 1300
140 LPW 1400 1400 1400
150 LPW 1500 1500 1500

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 8 of 10
Petrolux® LED
Wet Location for Demanding Environments

Ambient Temperature Ratings

SBG BTP or NLTAIR2 RSBG Sensors E10WMCP Lumens
Mounting SBGR Sensor Voltage Supply Wire
or NLTAIR2 RIO Control Module Battery 3000LM 5000LM 8000LM 10000LM
N Any -40°C to 65°C -40°C to 65°C -40°C to 60°C -40°C to 55°C 90°C
N
PM N Y 120-277 5°C to 40°C 5°C to 40°C 5°C to 35°C 5°C to 35°C 90°C
UNM Y N Any -40°C to 60°C -40°C to 60°C -40°C to 60°C -40°C to 55°C 90°C
YK90 N Any -40°C to 65°C -40°C to 65°C -40°C to 60°C -40°C to 55°C 90°C
Y N
Y 120-277 5°C to 40°C 5°C to 40°C 5°C to 35°C 5°C to 35°C 90°C

Marine/NEMA4X Compatibility
Option Group Options Marine NEMA4X
FWD, MD0, MDU5, MDU5FR, LND, WD YES YES
Distribution
SO, SOLND NO NO
PM, UNM YES YES
Mounting
YK90 NO YES
DBXD, DNXD NO NO
Finish DGXD YES YES
DWHXD YES NO
Cordsets Any Cordset NO NO
Hook HKMW NO NO
Individual Sensors SBGR10, SBGR10 P, SBGR10 D 3V NO NO
Bluetooth Sensors SBG10 OCC BTP, SBG10 HL BTP, SBG10 ADC BTP, SBG10 ANL BTP NO NO
nLight Air NLTAIR2 RSBG10, NLTAIR2 RIO NO NO
Emergency E10WMCP NO NO
Photocontrols BP, PER, PCS, P34, P48, PSC NO NO
AO YES YES
CR YES YES
EMD YES YES
FPA YES YES
Options
NSG NO NO
PC, PCPXLW NO NO
UPS, UPSPXLW YES YES
WGX, WGPXLW YES YES
072331, 072331CTL, 072332CTL, 072332CTL YES NO
Mounting Accessories
P3US, P3US35 NO NO

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 9 of 10
Petrolux® LED
Wet Location for Demanding Environments

Options and Accessories

HKMW (PF-291) Hook SBGR Sensor SBG BTP Sensor and Smarthub BTP Control Module

nLight Air RSBG Sensor nLight Air RIO Control AO Adjustable Output
Module Module

PM Pendant Mount UNM Universal Mount and YK90 Yoke Mount

WGX Wire Guard

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | HSI01@acuitybrands.com PXLW
© 2018-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/09/23 Specifications subject to change without notice. Page 10 of 10