s

UNIVERSITY DEPARTMENTS
ANNA UNIVERSITY CHENNAI : : CHENNAI 600 025
REGULATIONS - 2009 CURRICULUM I TO IV SEMESTERS (FULL TIME)

M.E. EMBEDDED SYSTEM TECHNOLOGIES

SEMESTER I SL. COURSE No CODE THEORY 1 MA9122 2 ET9111 3 ET9112 4 ET9113 5 ET9114 6 E1 COURSE TITLE Applied Mathematics for Electrical Engineering Advanced Digital System Design Micro Controller Based System Design Design of Embedded Systems Real Time Systems Elective I TOTAL L 3 3 3 3 3 3 18 T 1 0 0 0 0 0 1 P 0 0 0 0 0 0 0 C 4 3 3 3 3 3 19

SEMESTER II SL. COURSE NO CODE THEORY 1 ET9121 2 ET9122 3 ET9123 4 ET9124 5 E2 6 E3 PRACTICAL 7 ET9125 COURSE TITLE VLSI Architecture and Design Methodologies Real Time Operating System Embedded Networking Wireless & Mobile Communication Elective II Elective III Embedded System Lab TOTAL L 3 3 3 3 3 3 0 18 T 1 0 1 0 0 0 0 2 P 0 0 0 0 0 0 3 3 C 4 3 4 3 3 3 2 22

SEMESTER III SL. COURSE NO CODE THEORY 1 E4 2 E5 3 E6 PRACTICAL 4 ET9131 COURSE TITLE Elective IV Elective V Elective VI Project Work (Phase I) L 3 3 3 0 T 0 0 0 0 P 0 0 0 12 C 3 3 3 6

TOTAL

12 15

SEMESTER IV SL. COURSE NO CODE PRACTICAL 1 ET9141 COURSE TITLE Project Work (Phase II) TOTAL L 0 0 T 0 0 P C

24 12 24 12

TOTAL CREDITS TO BE EARNED FOR THE AWARD THE DEGREE = 68

ELECTIVES FOR M.E EMBEDDED SYSTEM TECHNOLOGIES SEMESTER I SL. COURSE NO CODE 1 ET9151 2 3 CO9151 ET9152 COURSE TITLE Software Technology for Embedded Systems Soft Computing Techniques Computer Architecture and parallel processing SEMESTER II 4 5 6 7 8 9 ET9153 ET9154 ET9155 ET9156 CO9122 ET9157 Design of Embedded Control Systems Embedded Communication and Software Design Ad-Hoc Networks Embedded Linux Digital Instrumentation RISC Processor Architecture and Programming SEMESTER III 10 11 12 13 14 15 16 17 18 ET9158 ET9159 ET9160 ET9161 ET9162 ET9163 CO9154 EB9152 CO9158 Advanced Embedded Systems Advanced Digital Signal Processing Cryptography and Network Security Programming with VHDL Computers in Networking and Digital control Distributed Embedded Computing Principle of Robotics Application of MEMS Technology Digital Image Processing 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 1 0 0 0 0 0 0 0 0 3 3 3 4 3 3 L 3 3 3 T 0 0 0 P 0 0 0 C 3 3 3

UNIVERSITY DEPARTMENTS
ANNA UNIVERSITY CHENNAI : : CHENNAI 600 025
REGULATIONS - 2009 CURRICULUM I TO VI SEMESTERS (PART TIME)

M.E. EMBEDDED SYSTEM TECHNOLOGIES

SEMESTER I SL. COURSE COURSE TITLE No CODE THEORY 1 MA9122 Applied Mathematics for Electrical Engineering 2 ET9111 Advanced Digital System Design 3 ET9112 Micro Controller Based System Design TOTAL SEMESTER II SL. COURSE NO CODE THEORY 1 ET9121 2 ET9122 3 ET9123 COURSE TITLE VLSI Architecture and Design Methodologies Real Time Operating System Embedded Networking TOTAL SEMESTER III SL. COURSE COURSE TITLE No CODE THEORY 1 ET9113 Design of Embedded Systems 2 ET9114 Real Time Systems 3 E1 Elective I TOTAL SEMESTER IV SL. COURSE NO CODE THEORY 1 ET9124 2 E2 3 E3 PRACTICAL 4 ET9125 COURSE TITLE Wireless & Mobile Communication Elective II Elective III Embedded System Lab L 3 3 3 0 T 0 0 0 0 P C 0 0 0 3 3 3 3 2 L 3 3 3 9 T 0 0 0 0 P 0 0 0 0 C 3 3 3 9 L 3 3 3 9 T 1 0 1 2 P C 0 0 0 0 4 3 4 11 L 3 3 3 9 T 1 0 0 1 P 0 0 0 0 C 4 3 3 10

TOTAL

11

SEMESTER V SL. COURSE NO CODE THEORY 1 E4 2 E5 3 E6 PRACTICAL 4 ET9131 COURSE TITLE Elective IV Elective V Elective VI Project Work (Phase I) TOTAL SEMESTER VI SL. COURSE NO CODE PRACTICAL 1 ET9141 COURSE TITLE Project Work (Phase II) TOTAL L 0 0 T 0 0 P C L 3 3 3 0 9 T 0 0 0 0 0 P 0 0 0 C 3 3 3

12 6 12 15

24 12 24 12

TOTAL CREDITS TO BE EARNED FOR THE AWARD THE DEGREE = 68

ELECTIVES FOR M.E EMBEDDED SYSTEM TECHNOLOGIES SEMESTER III SL. NO 1 2 3 COURSE CODE ET9151 CO9151 ET9152 COURSE TITLE Software Technology for Embedded Systems Soft Computing Techniques Computer Architecture and parallel processing L 3 3 3 T 0 0 0 P 0 0 0 C 3 3 3

SEMESTER IV 4 5 6 7 8 9 ET9153 ET9154 ET9155 ET9156 CO9122 ET9157 Design of Embedded Control Systems Embedded Communication and Software Design Ad-Hoc Networks Embedded Linux Digital Instrumentation RISC Processor Architecture and Programming 3 3 3 3 3 3 0 0 0 1 0 0 0 0 0 0 0 0 3 3 3 4 3 3

SEMESTER V 10 11 12 13 14 15 16 17 18 ET9158 ET9159 ET9160 ET9161 ET9162 ET9163 CO9154 EB9152 CO9158 Advanced Embedded Systems Advanced Digital Signal Processing Cryptography and Network Security Programming with VHDL Computer in Networking and Digital control Distributed Embedded Computing Principle of Robotics Application of MEMS Digital Image Processing 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3 3

MA 9122 APPLIED MATHEMATICS FOR ELECTRICAL ENGINEERS

LTPC 3104 1. ADVANCED MATRIX THEORY: 9 Eigen-values using QR transformations Generalized eigen vectors Canonical forms Singular value decomposition and applications Pseudo inverse Least square approximations. 2. LINEAR PROGRAMMING 9 Formulation Graphical Solution Simplex Method Two Phase Method Transportation and Assignment Problems. 3 .ONE DIMENSIONAL RANDOM VARIABLES 9 Random variables - Probability function moments moment generating functions and their properties Binomial, Poisson, Geometric, Uniform, Exponential, Gamma and Normal distributions Function of a Random Variable. 4. QUEUEING MODELS 9 Poisson Process Markovian queues Single and Multi Serve r Models Littles formula Machine Interference Model Steady State analysis Self Service queue. 5. COMPUTATIONAL METHODS IN ENGINEERING 9 Boundary value problems for ODE Finite difference methods Numerical solution of PDE Solution of Laplace and Poisson equations Liebmann's iteration process Solution of heat conduction equation by Schmidt explicit formula and CrankNicolson implicit scheme Solution of wave equation. L +T: 45+15 = 60 BOOKS FOR REFERENCE: 1. Bronson, R., Matrix Operation, Schaums outline series, McGraw Hill, New York, (1989). 2. Taha, H. A., Operations Research: An Introduction, Seventh Edition, Pearson Education Edition, Asia, New Delhi (2002). 3. R. E. Walpole, R. H. Myers, S. L. Myers, and K. Ye, Probability and Statistics for Engineers & Scientists, Asia, 8th Edition, (2007). 4. Donald Gross and Carl M. Harris, Fundamentals of Queueing theory, 2nd edition, John Wiley and Sons, New York (1985). 5. Grewal, B.S., Numerical methods in Engineering and Science, 7th edition, Khanna Publishers, 200

ET 9111 AIM

ADVANCED DIGITAL SYSTEM DESIGN

LTPC 3003

To expose the students to the fundamentals of digital logic based system design. OBJECTIVES To impart knowledge on i. Basics on Synchronous & Async digital switching design. ii. Design & realisation of error free functional blocks for digital systems 1. SEQUENTIAL CIRCUIT DESIGN 9

Analysis of Clocked Synchronous Sequential Networks (CSSN) Modelling of CSSN State Stable Assignment and Reduction Design of CSSN Design of Iterative Circuits ASM Chart ASM Realization, Design of Arithmetic circuits for Fast adder- Array Multiplier. 2. ASYNCHRONOUS SEQUENTIAL CIRCUIT DESIGN 9 Analysis of Asynchronous Sequential Circuit (ASC) Flow Table Reduction Races in ASC State Assignment Problem and the Transition Table Design of ASC Static and Dynamic Hazards Essential Hazards Data Synchronizers Designing Vending Machine Controller Mixed Operating Mode Asynchronous Circuits. 3. FAULT DIAGNOSIS AND TESTABILITY ALGORITHMS 9

Fault Table Method Path Sensitization Method Boolean Difference Method Kohavi Algorithm Tolerance Techniques The Compact Algorithm Practical PLAs Fault in PLA Test Generation Masking Cycle DFT Schemes Built-in Self Test. 4. SYNCHRONOUS DESIGN USING PROGRAMMABLE DEVICES 9

Programming Techniques -Re-Programmable Devices Architecture- Function blocks, I/O blocks, Interconnects, Realize combinational, Arithmetic, Sequential Circuit with Programmable Array Logic; Architecture and application of Field Programmable Logic Sequence. 5. NEW GENERATION PROGRAMMABLE LOGIC DEVICES 9 Foldback Architecture with GAL, EPLD, EPLA , PEEL, PML; PROM Realization State machine using PLD FPGA Xilinx FPGA Xilinx 2000 - Xilinx 3000 TOTAL : 45 PERIODS

REFERENCES: 1. Donald G. Givone, Digital principles and Design, Tata McGraw Hill 2002. 2. Stephen Brown and Zvonk Vranesic, Fundamentals of Digital Logic with VHDL Deisgn, Tata McGraw Hill, 2002 3. Mark Zwolinski, Digital System Design with VHDL, Pearson Education, 2004 4. Parag K Lala, Digital System design using PLD, BS Publications, 2003 5. John M Yarbrough, Digital Logic applications and Design, Thomson Learning, 2001 6. Nripendra N Biswas, Logic Design Theory, Prentice Hall of India, 2001

7. Charles H. Roth Jr., Fundamentals of Logic design, Thomson Learning, 2004. ET 9112 MICROCONTROLLER BASED SYSTEM DESIGN LTPC 3003 AIM To expose the students to the fundamentals of microcontroller based system design. OBJECTIVES To impart knowledge on i. 8051 Microcontroller based system design. ii. Microchip PIC 8 bit microcontroller based system Design 1. 8051 ARCHITECTURE 9

Architecture memory organization addressing modes instruction set Timers - Interrupts - I/O ports, Interfacing I/O Devices Serial Communication. 2. 8051 PROGRAMMING 9 Assembly language programming Arithmetic Instructions Logical Instructions Single bit Instructions Timer Counter Programming Serial Communication Programming Interrupt Programming RTOS for 8051 RTOSLite FullRTOS Task creation and run LCD digital clock/thermometer using FullRTOS PIC MICROCONTROLLER 9

3.

Architecture memory organization addressing modes instruction set PIC progrmming in Assembly & C I/O port, Data Conversion, RAM & ROM Allocation, Timer programming, MP-LAB. 4. PERIPHERAL OF PIC MICROCONTROLLER 9 Timers Interrupts, I/O ports- I2C bus-A/D converter-UART- CCP modules -ADC, DAC and Sensor Interfacing Flash and EEPROM memories. SYSTEM DESIGN CASE STUDY 9

5.

Interfacing LCD Display Keypad Interfacing - Generation of Gate signals for converters and Inverters - Motor Control Controlling AC appliances Measurement of frequency - Stand alone Data Acquisition System. TOTAL : 45 PERIODS REFERENCES: 1. Muhammad Ali Mazidi, Rolin D. Mckinlay, Danny Causey PIC Microcontroller and Embedded Systems using Assembly and C for PIC18, Pearson Education 2008

2. John Iovine, PIC Microcontroller Project Book , McGraw Hill 2000

3. Myke Predko, Programming and customizing the 8051 microcontroller, Tata

McGraw Hill 2001. ET 9113 LTPC 300 3 1. EMBEDDED DESIGN LIFE CYCLE 9 Product specification Hardware / Software partitioning Detailed hardware and software design Integration Product testing Selection Processes Microprocessor Vs Micro Controller Performance tools Bench marking RTOS Micro Controller Performance tools Bench marking RTOS availability Tool chain availability Other issues in selection processes. 2. PARTITIONING DECISION 9 DESIGN OF EMBEDDED SYSTEMS

Hardware / Software duality coding Hardware ASIC revolution Managing the Risk Co-verification execution environment memory organization System startup Hardware manipulation memory mapped access speed and code density. 3. INTERRUPT SERVICE ROUTINES 9

Watch dog timers Flash Memory basic toolset Host based debugging Remote debugging ROM emulators Logic analyser Caches Computer optimisation Statistical profiling 4. IN CIRCUIT EMULATORS 9

Buller proof run control Real time trace Hardware break points Overlay memory Timing constraints Usage issues Triggers. 5. TESTING 9

Bug tracking reduction of risks & costs Performance Unit testing Regression testing Choosing test cases Functional tests Coverage tests Testing embedded software Performance testing Maintenance. TOTAL : 45 PERIODS REFERENCE 1. Arnold S. Berger Embedded System Design, CMP books, USA 2002. 2. Sriram Iyer, Embedded Real time System Programming 3. ARKIN, R.C., Behaviour-based Robotics, The MIT Press, 1998.

ET 9114 REAL TIME SYSTEMS 1. INTRODUCTION

LTPC 3003 9

Introduction Issues in Real Time Computing Structure of a Real Time System Task classes Performance Measures for Real Time Systems Estimating Program Run Times Task Assignment and Scheduling Classical uniprocessor scheduling algorithms Uniprocessor scheduling of IRIS tasks Task assignment Mode changes and Fault Tolerant Scheduling. 2. PROGRAMMING LANGUAGES AND TOOLS 9

Programming Languages and Tools Desired language characteristics Data typing Control structures Facilitating Hierarchical Decomposition, Packages, Run time (Exception) Error handling Overloading and Generics Multitasking Low level programming Task Scheduling Timing Specifications Programming Environments Run time support. 3. REAL TIME DATABASES 9

Real time Databases Basic Definition, Real time Vs General Purpose Databases, Main Memory Databases, Transaction priorities, Transaction Aborts, Concurrency control issues, Disk Scheduling Algorithms, Two phase Approach to improve Predictability Maintaining Serialization Consistency Databases for Hard Real Time Systems. 4. COMMUNICATION 9

Real Time Communication Communications media, Network Topologies Protocols, Fault Tolerant Routing. Fault Tolerance Techniques Fault Types Fault Detection. Fault Error containment Redundancy Data Diversity Reversal Checks Integrated Failure handling. 5. EVALUATION TECHNIQUES 9

Reliability Evaluation Techniques Obtaining parameter values, Reliability models for Hardware Redundancy Software error models. Clock Synchronization Clock, A Nonfault Tolerant Synchronization Algorithm Impact of faults Fault Tolerant Synchronization in Hardware Fault Tolerant Synchronization in software. TOTAL : 45 PERIODS TEXT BOOKS 1. C.M. Krishna, Kang G. Shin, Real Time Systems, McGraw Hill International Editions, 1997. 2. Rajib Mall, Real-time systems: theory and practice, Pearson Education, 2007 3. Peter D.Lawrence, Real Time Micro Computer System Design An Introduction, McGraw Hill, 1988. 4. Stuart Bennett, Real Time Computer Control An Introduction, Prentice Hall of India, 1998. 5. S.T. Allworth and R.N.Zobel, Introduction to real time software design, Macmillan, 2nd Edition, 1987. 6. R.J.A Buhur, D.L Bailey, An Introduction to Real Time Systems, Prentice Hall International, 1999. 7. Philip.A.Laplante, Real Time System Design and Analysis, Prentice Hall of India, 3rd

10

Edition, April 2004. ET 9121 VLSI ARCHITECTURE AND DESIGN METHODOLOGIES LTPC 3104

1.CMOS DESIGN 9 Overview of digital VLSI design Methodologies- Logic design with CMOS-transmission gate circuits-Clocked CMOS-dynamic CMOS circuits, Bi-CMOS circuits- Layout diagram, Stick diagram-IC fabrications Trends in IC technology. 2.PROGRAMABLE LOGIC DEVICES 12 Programming Techniques-Anti fuse-SRAM-EPROM and EEPROM technology Re-Programmable Devices Architecture- Function blocks, I/O blocks,Interconnects, Xilinx- XC9500,Cool Runner - XC-4000,XC5200, SPARTAN, Virtex - Altera MAX 7000Flex 10K-Stratix. 3.ASIC CONSTRUCTION, FLOOR PLANNING, PLACEMENT AND ROUTING 6 System partition FPGA partitioning Partitioning methods- floor planning placementphysical design flow global routing detailed routing special routing- circuit extraction DRC. 4.ANALOG VLSI DESIGN 6 Introduction to analog VLSI- Design of CMOS 2stage-3 stage Op-Amp High Speed and High frequency op-amps-Super MOS-Analog primitive cells-realization of neural networks. 5. LOGIC SYNTHESIS AND SIMULATION 12 Overview of digital design with Verilog HDL, hierarchical modelling concepts, modules and port definitions, gate level modelling, data flow modelling, behavioural modelling, task & functions, Verilog and logic synthesis-simulation-Design examples,Ripple carry Adders, Carry Look ahead adders, Multiplier, ALU, Shift Registers, Multiplexer, Comparator, Test Bench. L: 45+T:15=60 References: 1.M.J.S Smith, Application Specific integrated circuits,Addition Wesley Longman Inc.1997. 2.Kamran Eshraghian,Douglas A.pucknell and Sholeh Eshraghian,Essentials of VLSI circuits and system, Prentice Hall India,2005. 3. Wayne Wolf, Modern VLSI design Prentice Hall India,2006. 4. Mohamed Ismail ,Terri Fiez, Analog VLSI Signal and information Processing, McGraw Hill International Editions,1994. 5.Samir Palnitkar, Veri Log HDL, A Design guide to Digital and Synthesis 2nd Ed,Pearson,2005.

11

ET 9122

REAL TIME OPERATING SYSTEMS

LTPC 3003 9

1. REVIEW OF OPERATING SYSTEMS

Basic Principles - Operating System structures System Calls Files Processes Design and Implementation of processes Communication between processes Introduction to Distributed operating system Distributed scheduling. 2. OVERVIEW OF RTOS 9 RTOS Task and Task state - Process Synchronisation- Message queues Mail boxes pipes Critical section Semaphores Classical synchronisation problem Deadlocks 3. REAL TIME MODELS AND LANGUAGES 9 Event Based Process Based and Graph based Models Real Time Languages RTOS Tasks RT scheduling - Interrupt processing Synchronization Control Blocks Memory Requirements. 4. REAL TIME KERNEL 9 Principles Design issues Polled Loop Systems RTOS Porting to a Target Comparison and study of various RTOS like QNX VX works PSOS C Executive Case studies. 5. RTOS APPLICATION DOMAINS 9 RTOS for Image Processing Embedded RTOS for voice over IP RTOS for fault Tolerant Applications RTOS for Control Systems. TOTAL : 45 PERIODS REFERENCES: 1. Raj Kamal, Embedded Systems- Architecture, Programming and Design Tata McGraw Hill, 2006. 2. Herma K., Real Time Systems Design for distributed Embedded Applications, Kluwer Academic, 1997. 3 Charles Crowley, Operating Systems-A Design Oriented approach McGraw Hill 1997. 4 C.M. Krishna, Kang, G.Shin, Real Time Systems, McGraw Hill, 1997. 5. Raymond J.A.Bhur, Donald L.Bailey, An Introduction to Real Time Systems, PHI 1999. 6. Mukesh Sighal and N G Shi Advanced Concepts in Operating System, McGraw Hill 2000.

12

ET 9123 AIM

EMBEDDED NETWORKING

LTPC 3104

To expose the students to the fundamentals of embedded networking. OBJECTIVES To impart knowledge on iii. Serial and parallel communication protocols iv. Application Development using USB and CAN bus for PIC microcontrollers ii. Application development using Embedded Ethernet for Rabbit processors. iii. Wireless sensor network communication protocols. 1. EMBEDDED COMMUNICATION PROTOCOLS 8

2.

Embedded Networking: Introduction Serial/Parallel Communication Serial communication protocols -RS232 standard RS485 Synchronous Serial Protocols -Serial Peripheral Interface (SPI) Inter Integrated Circuits (I2C) PC Parallel port programming -ISA/PCI Bus protocols - Firewire USB AND CAN BUS 10 USB bus Introduction Speed Identification on the bus USB States USB bus communication: Packets Data flow types Enumeration Descriptors PIC 18 Microcontroller USB Interface C Programs CAN Bus Introduction Frames Bit stuffing Types of errors Nominal Bit Timing PIC microcontroller CAN Interface A simple application with CAN

3.

ETHERNET BASICS

Elements of a network Inside Ethernet Building a Network: Hardware options Cables, Connections and network speed Design choices: Selecting components Ethernet Controllers Using the internet in local and internet communications Inside the Internet protocol 4. EMBEDDED ETHERNET 9

Exchanging messages using UDP and TCP Serving web pages with Dynamic Data Serving web pages that respond to user Input Email for Embedded Systems Using FTP Keeping Devices and Network secure.

6.

WIRELESS EMBEDDED NETWORKING

Wireless sensor networks Introduction Applications Network Topology Localization Time Synchronization - Energy efficient MAC protocols SMAC Energy efficient and robust routing Data Centric routing L = 45 T = 15 TOTAL = 60

13

TEXT BOOKS 1. Frank Vahid, Givargis Embedded Systems Design: A Unified Hardware/Software Introduction, Wiley Publications 2. Jan Axelson, Parallel Port Complete , Penram publications 3. Dogan Ibrahim, Advanced PIC microcontroller projects in C, Elsevier 2008 4. Jan Axelson Embedded Ethernet and Internet Complete, Penram publications 5. Bhaskar Krishnamachari, Networking wireless sensors, Cambridge press 2005

14

ET 9124

WIRELESS AND MOBILE COMMUNICATION

LTPC 3003 9

1. INTRODUCTION

Wireless Transmission signal propagation spread spectrum Satellite Networks Capacity Allocation FAMA DAMA MAC 2. MOBILE NETWORKS 9

Cellular Wireless Networks GSM Architecture Protocols Connection Establishment Frequency Allocation Routing Handover Security GPRA 3. WIRELESS NETWORKS 9

Wireless LAN IEEE 802.11 Standard-Architecture Services AdHoc NetworkHiper Lan Blue Tooth. 4. ROUTING 9

Mobile IP DHCP AdHoc Networks Proactive and Reactive Routing Protocols Multicast Routing 5. TRANSPORT AND APPLICATION LAYERS 9

TCP over Adhoc Networks WAP Architecture WWW Programming Model WDP WTLS WTP WSP WAE WTA Architecture WML WML scripts. TOTAL : 45 PERIODS REFERENCES 1. Kaveh Pahlavan, Prasanth Krishnamoorthy, Principles of Wireless Networks PHI/Pearson Education, 2003 2. Uwe Hansmann, Lothar Merk, Martin S. Nicklons and Thomas Stober, Principles of Mobile computing, Springer, New york, 2003. 3. C.K.Toh, AdHoc mobile wireless networks, Prentice Hall, Inc, 2002. 4. Charles E. Perkins, Adhoc Networking, Addison-Wesley, 2001. 5. Jochen Schiller, Mobile communications, PHI/Pearson Education, Second Edition, 2003. 6. William Stallings, Wireless communications and Networks, PHI/Pearson Education, 2002.

15

ET 9125

EMBEDDED SYSTEMS LABORATORY

LTPC 00 32

1. Design with 8 bit Microcontrollers 8051/PIC Microcontrollers i) I/O Programming, Timers, Interrupts, Serial port programming ii) PWM Generation, Motor Control, ADC/DAC, LCD and RTC Interfacing, Sensor Interfacing iii) Both Assembly and C programming 2. Design with 16 bit processors I/O programming, Timers, Interrupts, Serial Communication, 3. Design with ARM Processors. I/O programming, ADC/DAC, Timers, Interrupts, 4. Study of one type of Real Time Operating Systems (RTOS) 5. Electronic Circuit Design of sequential, combinational digital circuits using CAD Tools 6. Simulation of digital controllers using MATLAB/LabVIEW . 7. Programming with DSP processors for Correlation, Convolution, Arithmetic adder, Multiplier, Design of Filters - FIR based , IIR based 8. Design with Programmable Logic Devices using Xilinx/Altera FPGA and CPLD Design and Implementation of simple Combinational/Sequential Circuits 9. Network Simulators Simple wired/ wireless network simulation using NS2 10. Programming of TCP/IP protocol stack. P = 45 Total= 45

REFERENCE: 1. Mohamammad Ali Mazidi & Mazidi 8051 Microcontroller and Embedded Systems, Pearson Education 2. Mohammad Ali Mazidi, Rolind Mckinley and Danny Causey, PIC Microcontroller and Embedded Systems Pearson Education 3. Jan Axelson Embedded Ethernet and Internet Complete, Penram publications 4. Kraig Mitzner, Complete PCB Design using ORCAD Capture and Layout, Elsevier 5. Woon-Seng Gan, Sen M. Kuo, Embedded Signal Processing with the Micro Signal Architecture, John Wiley & Sons, Inc., Hoboken, New Jersey 2007 6. U. Meyer-Baese Digital Signal Processing using Field Programmable Gate Arrays, Springer 7. Dogan Ibrahim, Advanced PIC microcontroller projects in C, Elsevier 2008

16

ET 9131 PROJECT WORK (PHASE I) ET 9141 PROJECT WORK (PHASE II)

0 0

0 12 6 0 24 12

ET 9151 SOFTWARE TECHNOLOGY FOR EMBEDDED SYSTEMS 1. PROGRAMMING EMBEDDED SYSTEMS

LTPC 3003 9

Embedded Program Role of Infinite loop Compiling, Linking and locating downloading and debugging Emulators and simulators processor External peripherals Toper of memory Memory testing Flash Memory. 2. C AND ASSEMBLY 9

Overview of Embedded C - Compilers and Optimization - Programming and Assembly Register usage conventions typical use of addressing options instruction sequencing procedure call and return parameter passing retrieving parameters everything in pass by value temporary variables 3.EMBEDDED PROGRAM AND SOFTWARE DEVELOPMENT PROCESS 9 Program Elements Queues Stack- List and ordered lists-Embedded programming in C++ - Inline Functions and Inline Assembly - Portability Issues - Embedded JavaSoftware Development process: Analysis Design- Implementation Testing Validation- Debugging - Software maintenance 4. UNIFIED MODELLING LANGUAGE 9

Object State Behaviour UML State charts Role of Scenarios in the Definition of Behaviour Timing Diagrams Sequence Diagrams Event Hierarchies Types and Strategies of Operations Architectural Design in UML Concurrency Design Representing Tasks System Task Diagram Concurrent State Diagrams Threads. Mechanistic Design Simple Patterns 5. WEB ARCHITECTURAL FRAMEWORK FOR EMBEDDED SYSTEM 9

Basics Client/sever model- Domain Names and IP address Internet Infrastructure and Routing URL TCP/IP protocols - Embedded as Web Client - Embedded Web servers - HTML - Web security - Case study : Web-based Home Automation system TOTAL : 45 PERIODS

17

REFERENCES: 1. David E.Simon: An Embedded Software Primer, Pearson Education, 2003 2. Michael Barr, Programming Embedded Systems in C and C++, Oreilly, 2003 3. H.M. Deitel , P.J.Deitel, A.B. Golldberg Internet and World Wide Web How to Program Third Edition , Pearson Education , 2001. 4. Bruce Powel Douglas, Real-Time UML, Second Edition: Developing Efficient Object for Embedded Systems, 2nd edition ,1999, Addison-Wesley 5. Daniel W.lewis Fundamentals of Embedded Software where C and Assembly meet PHI 2002. 6. Raj Kamal, Embedded Systems- Architecture, Programming and Design Tata McGraw Hill, 2006.

CO 9151 1. INTRODUCTION

SOFT COMPUTING TECHNIQUES

LTPC 300 3 9

Approaches to intelligent control. Architecture for intelligent control. Symbolic reasoning system, rule-based systems, the AI approach. Knowledge representation. Expert systems. 2.ARTIFICIAL NEURAL NETWORKS 9

Concept of Artificial Neural Networks and its basic mathematical model, McCulloch-Pitts neuron model, simple perceptron, Adaline and Madaline, Feed-forward Multilayer Perceptron. Learning and Training the neural network. Data Processing: Scaling, Fourier transformation, principal-component analysis and wavelet transformations. Hopfield network, Self-organizing network and Recurrent network. Neural Network based controller 3. FUZZY LOGIC SYSTEM 9

Introduction to crisp sets and fuzzy sets, basic fuzzy set operation and approximate reasoning. Introduction to fuzzy logic modeling and control. Fuzzification, inferencing and defuzzification. Fuzzy knowledge and rule bases. Fuzzy modeling and control schemes for nonlinear systems. Self-organizing fuzzy logic control. Fuzzy logic control for nonlinear time-delay system.

18

4. GENETIC ALGORITHM

Basic concept of Genetic algorithm and detail algorithmic steps, adjustment of free parameters. Solution of typical control problems using genetic algorithm. Concept on some other search techniques like tabu search and anD-colony search techniques for solving optimization problems. 5. APPLICATIONS 9

GA application to power system optimisation problem, Case studies: Identification and control of linear and nonlinear dynamic systems using Matlab-Neural Network toolbox. Stability analysis of Neural-Network interconnection systems. Implementation of fuzzy logic controller using Matlab fuzzy-logic toolbox. Stability analysis of fuzzy control systems. TOTAL : 45 PERIODS REFERENCES 1. 2. 3. 4. 5. Jacek.M.Zurada, "Introduction to Artificial Neural Systems", Jaico Publishing House, 1999. KOSKO,B. "Neural Networks And Fuzzy Systems", Prentice-Hall of India Pvt. Ltd., 1994. KLIR G.J. & FOLGER T.A. "Fuzzy sets, uncertainty and Information", PrenticeHall of India Pvt. Ltd., 1993. Zimmerman H.J. "Fuzzy set theory-and its Applications"-Kluwer Academic Publishers, 1994. Driankov, Hellendroon, "Introduction to Fuzzy Control", Narosa Publishers.

ET 9152 COMPUTER ARCHITECTURE AND PARALLEL PROCESSING

LTPC 30 03

1. THEORY OF PARALLELISM

9 Parallel Computer models the state of computing, Multiprocessors and Multicomputers and Multivectors and SIMD computers, PRAM and VLSI models, Architectural development tracks, Program and network properties Conditions of parallelism.

2. PARTITIONING AND SCHEDULING 9 Program partitioning and scheduling, Program flow mechanisms, System interconnect architectures, Principles of scalable performance performance matrices and measures, Parallel processing applications, speedup performance laws, scalability analysis and approaches. 3. HARDWARE TECHNOLGIES 9

Processor and memory hierarchy advanced processor technology, superscalar and vector processors, memory hierarchy technology, virtual memory technology, bus cache and shared memory backplane bus systems, cache

19

memory organizations, shared memory organizations, sequential and weak consistency models.

4. PIPELINING AND SUPERSCALAR TECHNOLOGIES

9 Parallel and scalable architectures, Multiprocessor and Multicomputers, Multivector and SIMD computers, Scalable, Multithreaded and data flow architectures.

5. SOFTWARE AND PARALLEL PROCESSING 9 Parallel models, Languages and compilers, Parallel program development and environments, UNIX, MACH and OSF/1 for parallel computers. TOTAL : 45 PERIODS REFERENCES: 1. Kai Hwang Advanced Computer Architecture. McGraw Hill International 2001. 2. Dezso Sima, Terence Fountain, Peter Kacsuk, Advanced computer Architecture A design Space Approach. Pearson Education,2003. 3. Carl Homacher, Zvonko Vranesic, Sefwat Zaky, Computer Organisation, 5th Edition, TMH, 2002. 4. David E. Culler, Jaswinder Pal Singh with Anoop Gupta Parallel Computer Architecture ,Elsevier, 2004. 5. John P. Shen. Modern processor design Fundamentals of super scalar processors, Tata McGraw Hill 2003. 6. Sajjan G. Shiva Advanced Computer Architecture, Taylor & Francis, 2008. 7. V.Rajaraman, C.Siva Ram Murthy, Parallel Computers- Architecture and Programming, Prentice Hall India, 2008. 8. John L. Hennessy, David A. Petterson, Computer Architecture: A Quantitative Approach, 4th Edition, Elsevier, 2007. 9. Harry F. Jordan Gita Alaghaband, Fundamentals of Parallel Processing. Pearson Education, 2003. 10. Richard Y. Kain, Advanced computer architecture A system Design Approach, PHI, 2003.

ET 9153 DESIGN OF EMBEDDED CONTROL SYSTEM

LTPC 3 003

1.EMBEDDED SYSTEM ORGANIZATION 9 Embedded computing characteristics of embedded computing applications embedded system design challenges; Build process of Realtime Embedded system Selection of processor; Memory; I/O devices-Rs-485, MODEM, Bus Communication system using I2C, CAN, USB buses, 8 bit ISA, EISA bus; 2.REAL-TIME OPERATING SYSTEM 9 Introduction to RTOS; RTOS- Inter Process communication, Interrupt driven Input and Output -Nonmaskable interrupt, Software interrupt; Thread Single, Multithread concept; Multitasking Semaphores.

20

3.INTERFACE WITH COMMUNICATION PROTOCOL

Design methodologies and tools design flows designing hardware and software Interface . system integration; SPI, High speed data acquisition and interface-SPI read/write protocol, RTC interfacing and programming; 4.DESIGN OF SOFTWARE FOR EMBEDDED CONTROL 9

Software abstraction using Mealy-Moore FSM controller, Layered software development, Basic concepts of developing device driver SCI Software - interfacing & porting using standard C & C++ ; Functional and performance Debugging with benchmarking Realtime system software Survey on basics of contemporary RTOS VXWorks, UC/OS-II 5. CASE STUDIES WITH EMBEDDED CONTROLLER 9

Programmable interface with A/D & D/A interface; Digital voltmeter, control- Robot system; - PWM motor speed controller, serial communication interface. TOTAL : 45 PERIODS REFERENCES: 1. Steven F. Barrett, Daniel J. Pack, Embedded Systems Design and Applications with the 68HC 12 and HCS12, Pearson Education, 2008. 2. Raj Kamal, Embedded Systems- Architecture, Programming and Design Tata McGraw Hill, 2006. 3. Micheal Khevi, The M68HC11 Microcontroller application in control,Instrumentation & Communication, PH NewJersy, 1997. 4. Muhammad Ali Mazidi, Rolin D. Mckinlay, Danny Causey, PIC Microcontroller and Embedded Systems- Using Assembly and C for PIC18, Pearson Education,2008. 5. Steven F.Barrett,Daniel J.Pack,Embedded Systems-Design & Application with the 68HC12 & HCS12, Pearson Education,2008. 6. Daniel W. Lewis, Fundamentals of Embedded Software, Prentice Hall India, 2004. 7. Jack R Smith Programming the PIC microcontroller with MBasic Elsevier, 2007. 8. Keneth J.Ayala, The 8086 Microprocessor: Programming & Interfacing the PC, Thomson India edition, 2007.

ET 9154 EMBEDDED COMMUNICATION SOFTWARE DESIGN 1. OSI REFERENCE MODEL

LTPC 3003 9

Communication Devices Communication Echo System Design Consideration Host Based Communication Embedded Communication System OS Vs RTOS. 2. SOFTWARE PARTITIONING 9

Limitation of strict Layering Tasks & Modules Modules and Task Decomposition Layer2 Switch Layer3 Switch / Routers Protocol Implementation Management Types Debugging Protocols.

21

3. TABLES & OTHER DATA STRUCTURES

Partitioning of Structures and Tables Implementation Speeding Up access Table Resizing Table access routines Buffer and Timer Management Third Party Protocol Libraries. 4. MANAGEMENT SOFTWARE 9

Device Management Management Schemes Router Management Management of Sub System Architecture Device to manage configuration System Start up and configuration. 5. MULTI BOARD COMMUNICATION SOFTWARE DESIGN 9

Multi Board Architecture Single control Card and Multiple line Card Architecture Interface for Multi Board software Failures and Fault Tolerance in Multi Board Systems Hardware independent development Using a COTS Board Development Environment Test Tools. TOTAL : 45 PERIODS REFERENCES 1. Sridhar .T, Designing Embedded Communication Software CMP Books, 2003. 2. Comer.D, Computer networks and Internet, Third Edition, Prentice Hall, 2001.

22

ET 9155 ADHOC NETWORKS UNIT I WIRELESS LAN, PAN, WAN AND MAN

LTPC 3 003 9

Characteristics of wireless channel, Fundamentals of WLANs, IEEE 802.11 standard, HIPERLAN Standard, First-, Second-, and third- generation cellular systems, WLL, Wireless ATM, IEEE 802.16 standard, HIPERACCESS, AdHoc Wireless Internet. UNIT II MAC, ROUTING AND MULTICAST ROUTING PROTOCOLS 9

MAC Protocols: Design issues, goals and classification, Contention based protocols with reservation and scheduling mechanisms, Protocols using directional antennas. Routing protocols: Design issues and classification, Table-driven, On-demand and Hybrid routing protocols, Routing protocols with efficient flooding mechanisms, Hierarchical and power-aware routing protocols. Multicast Routing Protocols: Design issues and operation, Architecture reference model, classification, Tree-based and Mesh-based protocols, Energy-efficient multicasting. UNIT III TRANSPORT LAYER AND SECURITY PROTOCOLS 9

Transport layer Protocol: Design issues, goals and classification, TCP over AdHoc wireless Networks, Security, Security requirements, Issues and challenges in security provisioning, Network security attacks, Security routing. Quality of Service: Issues and challenges in providing QoS, Classification of QoS solutions, MAC layer solutions, Network layer solutions, QoS frameworks. UNIT IV ENERGY MANAGEMENT 9

Need, classification of battery management schemes, Transmission power management schemes, System power management schemes. Wireless Sensor Networks: Architecture, Data dissemination, Date gathering, MAC protocols, location discovery, Quality of a sensor network. UNIT V PERFORMANCE ANALYSIS 9

ABR beaconing, Performance parameters, Route-discovery time, End-to-end delay performance, Communication throughput performance, Packet loss performance, Route reconfiguration/repair time, TCP/IP based applications. TOTAL : 45 PERIODS

23

REFERENCES 1. C. Siva Ram Murthy and B.S. Manoj, AdHoc Wireless Networks: Architectures and protocols, Prentice Hall PTR, 2004 2. C.-K.Toh, AdHoc Mobile Wireless Networks: Protocols and Systems, Prentice Hall PTR, 2001 3. Mohammad Ilyas, The Handbook of AdHoc Wireless Networks, CRC press, 2002 4. Charles E. Perkins, AdHoc Networking, Addison Wesley, 2000 5. Stefano Basagni, Marco Conti, Silvia Giordano and Ivan Stojmenovic, Mobile AdHoc Networking, Wiley IEEE press, 2004.

ET 9156 AIM

EMBEDDED LINUX

LTPC 3104

To expose the students to the fundamentals of embedded Linux programming. 1. FUNDAMENTALS OF OPERATING SYSTEMS 8

Overview of operating systems Process and threads Processes and Programs Programmer view of processes OS View of processes Threads Scheduling Non preemptive and preemptive scheduling Real Time Scheduling Process Synchronization Semaphores Message Passing Mailboxes Deadlocks Synchronization and scheduling in multiprocessor Operating Systems 2. LINUX FUNDAMENTALS 10 Introduction to Linux Basic Linux commands and concepts Logging in - Shells - Basic text editing - Advanced shells and shell scripting Linux File System Linux programming - Processes and threads in Linux Inter process communication Devices Linux System calls INTRODUCTION TO EMBEDDED LINUX 8 Embedded Linux Introduction Advantages- Embedded Linux Distributions Architecture - Linux kernel architecture - User space linux startup sequence GNU cross platform Tool chain 4. BOARD SUPPORT PACKAGE AND EMBEDDED STORAGE 10 Inclusion of BSP in kernel build procedure - The bootloader Interface Memory Map Interrupt Management PCI Subsystem Timers UART Power Management Embedded Storage Flash Map Memory Technology Device (MTD) MTD Architecture - MTD Driver for NOR Flash The Flash Mapping drivers MTD Block and character devices mtdutils package Embedded File Systems Optimizing storage space Turning kernel memory EMBEDDED DRIVERS AND APPLICATION PORTING 9

3.

4.

Linux serial driver Ethernet driver I2C subsystem USB gadgets Watchdog timer Kernel Modules Application porting roadmap - Programming with

24

pthreads Operting System Porting Layer Kernel API Driver - Case studies RT Linux uClinux L = 45 T = 15 TOTAL = 60 REFERENCE BOOKS 1. Dhananjay M. Dhamdhere, Operating Systems A concept based Approach, Tata Mcgraw-Hill Publishing Company Ltd 2. Matthias Kalle Dalheimer, Matt Welsh, Running Linux, OReilly Publications 2005 3. Mark Mitchell, Jeffrey Oldham and Alex Samuel Advanced Linux Programming New Riders Publications 4. P. Raghavan ,Amol Lad , Sriram Neelakandan, Embedded Linux System Design and Development, Auerbach Publications 2006 5. Karim Yaghmour, Building Embedded Linux Systems, O'Reilly Publications 2003

CO 9122

DIGITAL INSTRUMENTATION

LTPC 3 003

1. DATA ACQUISITION SYSTEMS

9 Overview of A/D converter, types and characteristics Sampling , Errors. Objective Building blocks of Automation systems Counters Modes of operation- Frequency, Period, Time interval measurements, Prescaler, Heterodyne converter for frequency measurement, Single and Multi channel Data Acquisition systems. 9 Data transmission systems 8086 Microprocessor based system design Peripheral Interfaces Time Division Multiplexing (TDM) Digital Modulation Pulse Modulation Pulse Code Format Interface systems and standards Communications.

2. INTERFACING AND DATA TRANSMISSION

3. INSTRUMENTATION BUS

9 Introduction, Modem standards, Basic requirements of Instrument Bus standards, Bus communication, interrupt and data handshaking , Interoperability, interchangeability for RS-232, USB, RS-422, RS-485. 9 Field bus, Mod bus, GPIB, IEEE-488, VME, VXI, Network buses Ethernet TCP/IP protocols; CAN bus- basics, Message transfer, Fault confinement.

4. PARALLEL PORT BUSES

5. CASE STUDIES 9 PC based DAS, Data loggers, PC based industrial process measurements like flow, temperature, pressure and level development system, CRT interface and controller with monochrome and colour video display. TOTAL : 45 PERIODS REFERENCES:

25

1. A.J. Bouwens, Digital Instrumentation , TATA McGraw-Hill Edition, 1998. 2. N. Mathivanan, Microprocessors, PC Hardware and Interfacing, PrenticeHall India, 2005. 3. H S Kalsi, Electronic Instrumentation Second Edition, Tata McGrawHill,2006. 4. Joseph J. Carr, Elements of Electronic Instrumentation and Measurement Third Edition, Pearson Education, 2003. 5. Buchanan, Computer busses, Arnold, London,2000. 6. Jonathan W Valvano, Embedded Microcomputer systems, Asia Pvt. Ltd., Brooks/Cole, Thomson, 2001.

ET 9157 RISC PROCESSOR ARCHITECTURE AND PROGRAMMING AIM

LTPC 300 3

To expose the students to the fundamentals of AVR, ARM Architecture and Programming. 1. AVR MICROCONTROLLER ARCHITECTURE 9 Architecture memory organization addressing modes instruction set programming techniques Assembly language & C programming- Development Tools Cross Compilers Hardware Design Issues . 2. PERIPHERAL OF AVR MICROCONTROLLER 9 I/O Memory EEPROM I/O Ports SRAM Timer UART Interrupt StructureSerial Communication with PC ADC/DAC Interfacing .

ARM ARCHITECTURE AND PROGRAMMING

Arcon RISC Machine Architectural Inheritance Core & Architectures Registers Pipeline - Interrupts ARM organization - ARM processor family Co-processors. Instruction set Thumb instruction set Instruction cycle timings - The ARM Programmers model ARM Development tools ARM Assembly Language Programming and Ccompiler programming. 4 ARM APPLICATION DEVELOPMENT 9 Introduction to DSP on ARM FIR Filter IIR Filter Discrete fourier transform Exception Handling Interrupts Interrupt handling schemes- Firmware and bootloader Example: Standalone Embedded Operating Systems Fundamental Components - Example Simple little Operating System

6. DESIGN WITH ARM MICROCONTROLLERS 26

Integrated development environment - STDIO Libraries - User Peripheral Devices Application of ARM processor: Wireless Sensor Networks, Robotics. TOTAL : 45 PERIODS REFERENCE

1. Steve Furber, ARM system on chip architecture, Addision Wesley 2. Andrew N. Sloss, Dominic Symes, Chris Wright, John Rayfield ARM System 3.
4. 5. 6. 7. 8. Developers Guide Designing and Optimizing System Software, Elsevier 2007. Trevor Martin, The Insider's Guide To The Philips ARM7-Based Microcontrollers, An Engineer's Introduction To The LPC2100 Series Hitex (UK) Ltd., Dananjay V. Gadre Programming and Customizing the AVR microcontroller, McGraw Hill 2001 ARM Architecture Reference Manual LPC213x User Manual www.arm.com www.nxp.com

ET 9158 ADVANCED EMBEDDED SYSTEMS

LTPC 3003

AIM To expose the students to the fundamentals of embedded system design. OBJECTIVES To impart knowledge on 1. Fundamentals on design attributes of functional units of a Processor 2. Intra & Inter processor Communications 1. INTRODUCTION TO EMBEDDED HARDWARE AND SOFTWARE 9

Terminology Gates Timing diagram Memory Microprocessor buses Direct memory access Interrupts Built interrupts Interrupts basis Shared data problems Interrupt latency - Embedded system evolution trends Interrupt routines in an RTOS environment . 2. SYSTEM MODELLING WITH HARDWARE/SOFTWARE PARTITIONING 9

Embedded systems, Hardware/Software Co-Design, Co-Design for System Specification and modellingSingle-processor Architectures&,Multi-ProcessorArchitectures, comparison of Co-Design Approaches, Models of Computation, Requirements for Embedded System Specification, Hardware/Software Partitioning Problem, Hardware/Software Cost Estimation, Generation of Partitioning by Graphical modelling, Formulation of the HW/SW scheduling, Optimization. 3. HARDWARE/SOFTWARE CO-SYNTHESIS 9

27

The Co-Synthesis Problem, State-Transition Graph, Refinement and Controller Generation, Distributed System Co-Synthesis. 4. MEMORY AND INTERFACING 9

Memory: Memory write ability and storage performance Memory types composing memory Advance RAM interfacing communication basic Microprocessor interfacing I/O addressing Interrupts Direct memory access Arbitration multilevel bus architecture Serial protocol Parallel protocols Wireless protocols Digital camera example. 5. CONCURRENT PROCESS MODELS AND HARDWARE SOFTWARE CO-DESIGN 9 Modes of operation Finite state machines Models HCFSL and state charts language state machine models Concurrent process model Concurrent process Communication among process Synchronization among process Implementation Data Flow model. Design technology Automation synthesis Hardware software cosimulation IP cores Design Process Model. TOTAL : 45 PERIODS

REFERENCES 1. David. E. Simon, An Embedded Software Primer, Pearson Education, 2001. 2. Tammy Noergaard, Embedded System Architecture, A comprehensive Guide for Engineers and Programmers, Elsevier, 2006 3. Raj Kamal, Embedded Systems- Architecture, Programming and Design Tata 2002. 5. Steve Heath, Embedded System Design, Elsevier, Second Edition, 2004. 6. Ralf Niemann, Hardware/Software Co-Design for Data Flow Dominated Embedded Systems, Kluwer Academic Pub, 1998. 7. Jorgen Staunstrup, Wayne Wolf, Harware/Software Co-Design:Principles and Practice, Kluwer Academic Pub, 1997. 8. Giovanni De Micheli, Rolf Ernst Morgon, Reading in Hardware/Software CoDesign Kaufmann Publishers, 2001. McGraw Hill, 2006. 4. Frank Vahid and Tony Gwargie, Embedded System Design, John Wiley & sons,

28

29

ET 9159

LTPC 3003 1. INTRODUCTION 9 Mathematical description of change of sampling rate Interpolation and Decimation, Filter implementation for sampling rate conversion direct form FIR structures, DTFT, FFT, Wavelet transform and filter bank implementation of wavelet expansion of signals

ADVANCED DIGITAL SIGNAL PROCESSING

2. ESTIMATION AND PREDICTION TECHNIQUES

Discrete Random Processes Ensemble averages, Stationary processes, Autocorrelation and Auto covariance matrices. Parsevals Theorem, WienerKhintchine Relation Power Spectral Density. AR, MA, ARMA model based spectral estimation. Parameter Estimation, Linear prediction Forward and backward predictions, Least mean squared error criterion Wiener filter for filtering and prediction, Discrete Kalman filter.

3. DIGITAL SIGNAL PROCESSOR

Basic Architecture Computational building blocks, MAC, Bus Architecture and memory, Data Addressing, Parallelism and pipelining, Parallel I/O interface, Memory Interface, Interrupt, DMA.

4. APPLICATION OF DSP

9 Design of Decimation and Interpolation Filter, FFT Algorithm, PID Controller, Application for Serial Interfacing, DSP based Power Meter, Position control. 9 Basics on DSP sytem architecture design using VHDL programming, Mapping of DSP algorithm onto hardware, Realisation of MAC & Filter structure. TOTAL : 45 PERIODS REFERENCES: 1. Bernard Widrow, Samuel D. Stearns, Adaptive Signal Processing, Pearson Education, third edition, 2004. 2. Dionitris G. Manolakis, Vinay K. Ingle, Stepen M. Kogon,Statistical & Adaptive signal processing, spectral estimation, signal modeling, Adaptive filtering & Array processing, McGraw-Hill International edition 2000. 3. Monson H. Hayes, Statistical Digital Signal Processing and Modelling, John Wiley and Sons, Inc., 4. John G. Proaks, Dimitris G. Manolakis, Digital Signal Processing, Pearson Education 2002. 5. S. Salivahanan, A. Vallavaraj and C. Gnanapriya Digital Signal Processing, TMH,2000. 6. Avatar Sing, S. Srinivasan, Digital Signal Processing- Implementation using DSP Microprocessors with Examples from TMS320C54xx, Thomson India, 2004. 7. Lars Wanhammer, DSP Integrated Circuits, Academic press, 1999,New York. 8. Ashok Ambardar,Digital Signal Processing: A Modern Introduction,Thomson India edition, 2007. 9. Lars Wanhammer, DSP Integrated Circuits, Academic press, 1999,New York.

5. VLSI IMPLEMENTATION

30

ET 9160 CRYPTOGRAPHY AND NETWORK SECURITY 1. SYMMETRIC CIPHERS

LTPC 3003 9

Overview classical Encryption Techniques Block Ciphers and the Data Encryption standard Introduction to Finite Fields Advanced Encryption standard Contemporary Symmetric Ciphers Confidentiality using Symmetric Encryption. 2. PUBLIC-KEY ENCRYPTION AND HASH FUNCTIONS 9

Introduction to Number Theory Public-Key Cryptography and RSA Key Management Diffie-Hellman Key Exchange Elliptic Curve Cryptography Message Authentication and Hash Functions Hash Algorithms Digital Signatures and Authentication Protocols. 3. NETWORK SECURITY PRACTICE 9

Authentication Applications Kerberos X.509 Authentication Service Electronic mail Security Pretty Good Privacy S/MIME IP Security architecture Authentication Header Encapsulating Security Payload Key Management. 4. SYSTEM SECURITY 9

Intruders Intrusion Detection Password Management Malicious Software Firewalls Firewall Design Principles Trusted Systems. 5. WIRELESS SECURITY 9

Introduction to Wireless LAN Security Standards Wireless LAN Security Factors and Issues. TOTAL : 45 PERIODS TEXT BOOKS 1. William Stallings, Cryptography And Network Security Principles And Practices, Pearson Education, 3rd Edition, 2003.

REFERENCES 1. Atul Kahate, Cryptography and Network Security, Tata McGraw Hill, 2003. 2. Bruce Schneier, Applied Cryptography, John Wiley and Sons Inc, 2001. 3. Stewart S. Miller, Wi-Fi Security, McGraw Hill, 2003. 4. Charles B. Pfleeger, Shari Lawrence Pfleeger, Security In Computing, 3rd Edition, Pearson Education, 2003. 5. Mai, Modern Cryptography: Theory and Practice, First Edition, Pearson Education, 2003.

31

ET 9161 PROGRAMMING WITH VHDL

LTPC 3003 9

1. VHDL FUNDAMENTALS

Fundamental concepts- Modeling digital system-Domain and levels of modelingmodeling languages-VHDL modeling concepts-Scalar Data types and operations- constants and Variable-Scalar Types- Type Classification-Attributes and scalar types-expression and operators-Sequential statements.

2.

DATA TYPES AND BASIC MODELING CONSTRUCTS 9 Arrays- unconstrained array types-array operations and referencing- records Access Types- Abstract Date types- -basic modeling constructs-entity declarations-Architecture bodies-behavioral description-structural descriptionsdesign Processing, case study: A pipelined Multiplier accumulator. 9 Procedures-Procedure parameters- Concurrent procedure call statements Functions Overloading visibility of Declarations-packages and use clausesPackage declarations-package bodies-use clauses-Predefined aliases-Aliases for Data objects-Aliases for Non-Data items-Files- I/O-Files. Case study: A bit vector arithmetic Package. 9 Basic Resolved Signals-IEEE std_Logic_1164 resolved subtypes- resolved Signal Parameters - Generic Constants- Parameterizing behaviorParameterizing structure-components and configurations-Generate StatementsGenerating Iterative structure-Conditionally generating structure-Configuration of generate statements-case study: DLX computer Systems. Realization of -Micro controller CPU.Design,synthesis,simulation and testing. MemoriesI/O 9 devices-MAC-

3. SUBPROGRAMS , PACKAGES AND FILES

4. SIGNALS, COMPONENTS, CONFIGURATIONS.

5. DESIGN WITH PROGRAMMABLE LOGIC DEVICES

TOTAL : 45 PERIODS REFERENCES

1. Peter J.Ashenden, The Designers guide to VHDL, Morgan Kaufmann

publishers,San Francisco,Second Edition, May 2001. 2. Zainalabedin navabi, VHDL Analysis ans modeling of Digital Systems, McGraw Hill international Editions, Second Editions, 1998. 3. Charles H Roth, Jr. Digital system Design using VHDL, Thomson ,2006. 4. Douglas Perry, VHDL Programming by Example, Tata McGraw Hill,4th Edition 2002. 5. Navabi.Z., VHDL Analysis and Modeling of Digital Systems, McGraw International, 1998. 6. Peter J Ashendem, The Designers Guide to VHDL, Harcourt India Pvt Ltd, 2002 7. Skahill. K, VHDL for Programmable Logic, Pearson education, 1996.

32

ET 9162 COMPUTERS IN NETWORKING AND DIGITAL CONTROL

LTPC 3003 1. NETWORK FUNDAMENTALS: 9 Data communication networking Data transmission concepts Communication networking - Overview of OSI- TCP/IP layers IP addressing - DNS Packet Switching Routing Fundamental concepts in SMTP, POP, FTP, Telnet, HTML, HTTP, URL, SNMP,ICMP. 2. DATA COMMUNICATION: 9 Sensor data acquisition, Sampling, Quantization, Filtering ,Data Storage, Analysis using compression techniques, Data encoding Data link control Framing, Flow and Error control, Point to point protocol, Routers, Switches , Bridges MODEMs, Network layer Congestion control , Transport layer- Congestion control, Connection establishment. 3. VIRTUAL INSTRUMENTATION: 9 Block diagram and Architecture Data flow techniques Graphical programming using GUI Real time system Embedded controller Instrument drivers Software and hardware simulation of I/O communication blocks ADC/DAC Digital I/O Counter , Timer, Data communication ports. 4. MEASUREMENT AND CONTROL THROUGH INTERNET: 9 Web enabled measurement and control-data acquisition for Monitoring of plant parameters through Internet Calibration of measuring instruments through Internet, Web based control Tuning of controllers through Internet 5. VI BASED MEASUREMENT AND CONTROL: 9 Simulation of signal analysis & controller logic modules for Virtual Instrument control Case study of systems using VI for data acquisition, Signal analysis, controller design, Drives control. TOTAL : 45 PERIODS REFERENCES: 1. Wayne Tomasi, Introduction to Data communications and Networking Pearson Education, 2007. 2. Al Williams, Embedded Internet Design, Second Edition, TMH, 2007. 3. Douglas E.Comer, Internetworking with TCP/IP, Vol. 1, Third Edition, Prentice Hall, 1999. 4. Cory L. Clark, LabVIEW Digital Signal Processing and Digital Communication, TMH edition 2005. 5. Behrouza A Forouzan,Data Communications and Networking Fourth edition, TMH, 2007. 6. Krishna Kant,Computer based Industrial control,PHI,2002. 7. Gary Johnson, LabVIEW Graphical Programming, Second edition, McGraw Hill, Newyork, 1997. 8. Kevin James, PC Interfacing and Data Acquisition: Techniques for measurement, Instrumentation and control, Newnes, 2000. 9. Cory L. Clark,LabVIEW Digital Signal processing and Digital Communications Tata McGRAW-HILL edition, 2005.

33

ET 9163 DISTRIBUTED EMBEDDED COMPUTING

LTPC 30 03 9

1.

THE HARDWARE INFRASTRUCTURE

Broad Band Transmission facilities Open Interconnection standards Local Area Networks Wide Area Networks Network management Network Security Cluster computers.

2.

INTERNET CONCEPTS

Capabilities and limitations of the internet Interfacing Internet server applications to corporate databases HTML and XML Web page design and the use of active components. 3. DISTRIBUTED COMPUTING USING JAVA 9

IO streaming Object serialization Networking Threading RMI multicasting distributed databases embedded java concepts case studies.

4.

EMBEDDED AGENT

Introduction to the embedded agents Embedded agent design criteria Behaviour based, Functionality based embedded agents Agent co-ordination mechanisms and benchmarks embedded-agent. Case study: Mobile robots. 5. EMBEDDED COMPUTING ARCHITECTURE 9

Synthesis of the information technologies of distributed embedded systems analog/digital co-design optimizing functional distribution in complex system design validation and fast prototyping of multiprocessor system-on-chip a new dynamic scheduling algorithm for real-time multiprocessor systems. TOTAL : 45 PERIODS REFERENCES: 1. Dietel & Dietel, JAVA how to program, Prentice Hall 1999. 2. Sape Mullender, Distributed Systems, Addison-Wesley, 1993. 3. George Coulouris and Jean Dollimore, Distributed Systems concepts and design,Addison Wesley 1988. 4. Architecture and Design of Distributed Embedded Systems, edited by Bernd Kleinjohann C-lab, Universitat Paderborn, Germany, Kluwer Academic Publishers, Boston, April 2001, 248 pp.

34

CO 9154

LTPC 3003 1. INTRODUCTION AND TERMINOLOGIES: 9 Definition-Classification-History- Robots components-Degrees of freedom-Robot jointscoordinatesReference frames-workspace-Robot languages-actuators-sensorsPosition, velocity and acceleration sensors-Torque sensors-tactile and touch sensorsproximity and range sensors-social issues 2. KINEMATICS 9 Mechanism-matrix representation-homogenous transformation-DH representationInverse kinematics-solution and programming-degeneracy and dexterity 3. DIFFERENTIAL MOTION & VELOCITIES 9 Jacobian-differential motion of frames-Interpretation-calculation of Jacobian-Inverse Jacobian-Design-Lagrangian mechanics-dynamic equations-static force analysis 4. ROBOT CONTROL SYSTEM 9 Sensor characteristics- Hydraulic, Pneumatic and electric actuators-trajectory planningdecentalised PID control- non-linear decoupling control 5. IMAGE PROCESSING & VISION SYSTEMS 9 Two and three dimensional images-spatial and frequency domain representation-noise and edges- convolution masks-Processing techniques-thersholding-noise reductionedge detection-segmentation-Image analysis and object recognition TOTAL : 45 PERIODS REFERENCES 1. 2. 3. Saeed B. Niku ,''Introduction to Robotics '', Pearson Education, 2002 Fu, Gonzalez and Lee Mcgrahill ,''Robotics ", international R.D. Klafter, TA Chmielewski and Michael Negin, "Robotic Engineering, An Integrated approach", Prentice Hall of India, 2003.

PRINCIPLES OF ROBOTICS

EB 9152 APPLICATIONS OF MEMS TECHNOLOGY

LTPC 3 0 03

1. MEMS:MICRO-FABRICATION, MATERIALS AND ELECTRO-MECHANICAL CEPTS 9 Overview of micro fabrication Silicon and other material based fabrication processes Concepts: Conductivity of semiconductors-Crystal planes and orientation-stress and strain-flexural beam bending analysis-torsional deflections-Intrinsic stress- resonant frequency and quality factor.

35

2. ELECTROSTATIC SENSORS AND ACTUATION 9 Principle, material, design and fabrication of parallel plate capacitors as electrostatic sensors and actuators-Applications 3. THERMAL SENSING AND ACTUATION 9 Principle, material, design and fabrication of thermal couples, thermal bimorph sensors, thermal resistor sensors-Applications. 4. PIEZOELECTRIC SENSING AND ACTUATION 9 Piezoelectric effect-cantilever piezo electric actuator model-properties of piezoelectric materials-Applications. 5. CASE STUDIES 9 Piezoresistive sensors, Magnetic actuation, Micro fluidics applications, Medical applications, Optical MEMS. TOTAL : 45 PERIODS REFERENCES 1. Chang Liu, Foundations of MEMS, Pearson International Edition, 2006. 2. Marc Madou , Fundamentals of microfabrication,CRC Press, 1997. 3.Boston , Micromachined Transducers Sourcebook,WCB McGraw Hill, 1998. 4.M.H.Bao Micromechanical transducers :Pressure sensors, accelerometers and gyroscopes, Elsevier, Newyork, 2000.

CO 9158

DIGITAL IMAGE PROCESSING

LTPC 3003 9

1. FUNDAMENTALS OF IMAGE PROCESSING

Introduction Steps in image processing systems Image acquisition Sampling and Quantization Pixel relationships Color fundamentals and models, File formats, Image operations Arithmetic, Geometric and Morphological.

36

2. IMAGE ENHANCEMENT

Spatial Domain: Gray level Transformations Histogram processing Spatial filtering smoothing and sharpening. Frequency Domain: Filtering in frequency domain DFT, FFT, DCT Smoothing and sharpening filters Homomorphic Filtering. 3. IMAGE SEGMENTATION AND FEATURE ANALYSIS 9

Detection of Discontinuities Edge operators Edge linking and Boundary Detection Thresholding Region based segmentation Morphological Watersheds Motion Segmentation, Feature Analysis and Extraction. 4. MULTI RESOLUTION ANALYSIS AND COMPRESSIONS 9

Multi Resolution Analysis: Image Pyramids Multi resolution expansion Wavelet Transforms, Image compression: Fundamentals Models Elements of Information Theory Error free compression Lossy Compression Compression Standards. 5. APPLICATION OF IMAGE PROCESSING 9

Image classification Image recognition Image understanding Video motion analysis Image fusion Steganography Digital compositing Mosaics Colour Image Processing. TOTAL : 45 PERIODS REFERENCES : 1. Rafael C.Gonzalez and Richard E.Woods, Digital Image Processing, 2nd Edition, Pearson Education, 2003. 2. Milan Sonka, Valclav Halavac and Roger Boyle, Image Processing, Analysis and Machine Vision, 2nd Edition, Thomson Learning, 2001. 3. Anil K.Jain, Fundamentals of Digital Image Processing. Pearson Education, 2003.

37