Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
229 views

Scraper (Text)

Scrapers are cutting tools used to remove small amounts of material from flat or curved surfaces to achieve a close fit. There are different types of scrapers for various applications, including triangular scrapers for standard scraping, and internal scrapers for deburring crossholes. Scrapers have several parts, including handles made of plastic or metal to hold the assembly, various holders to attach different blade types, and blades made of steel or carbide suited for different material surfaces and degrees of curvature.

Uploaded by

Yessy Yuliaputri
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
229 views

Scraper (Text)

Scrapers are cutting tools used to remove small amounts of material from flat or curved surfaces to achieve a close fit. There are different types of scrapers for various applications, including triangular scrapers for standard scraping, and internal scrapers for deburring crossholes. Scrapers have several parts, including handles made of plastic or metal to hold the assembly, various holders to attach different blade types, and blades made of steel or carbide suited for different material surfaces and degrees of curvature.

Uploaded by

Yessy Yuliaputri
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 7

Civil Engineering Polytechnic of Bandung

Scraper
A. Introduction This is a kind of engineer equipment. Engineer scrapers are extremely hard cutting tools which have either one, two or three cutting edges. When a cutting edge is pressed againt a surface and given a very short movement, the scraper removes a very small shaving of metal. Any type of scrapers called, it is used to correct slight errors on flat or curved surfaces that must be finished more accurately. Scrapers are used to produce a high degree of fit between two flat or two curved surfaces particularly where the surfaces can rub together in use. After a surface is filed or machined as accurately as possible, it can be futher improved by rough scraping, after which finish scraping is employed. Accurate scraping is used only to remove minute amounts of material. It is essential that the cutting of a scraper be carefully tempered, uniform and free from defects. In addition, the cutting edge must be keen, hard and durable. This requires careful grid followed by honing on a suitable abrasive stone. B. Types of Scrapers Types of scrapers consist of 1. Mini Scraper (NG3700) This scraper ideals for tool and die makers. :

Picture 1. NG3700

1 Civil Engineering Polytechnic of Bandung

Civil Engineering Polytechnic of Bandung 2. Triangular Scraper (NG3600) This scraper used for standard scraping.

Picture 2. NG3600

3. Internal Scraper (NG3710) This scraper ideals for crossholes deburring.

Picture 3. NG3710

4. Adjustable Scraper (SC8000) This Scraper ideals for scraping, triming and deburing almost all materials.

Picture 4. SC8000

2 Civil Engineering Polytechnic of Bandung

Civil Engineering Polytechnic of Bandung C. Part of Scraper Part of scraper, consist of 1. Handles a. NG 3 Handles (NG3000) Location Function Properties : At the end of holder and blade : To hold all blades holders : Made of Plastic :

Picture 5. NG3000

b. SC Handles (SC1300) Location Function Properties : At the end of holder and blade : To hold all blades holders : Made of Plastic and metal

Picture 6. SC1300

3 Civil Engineering Polytechnic of Bandung

Civil Engineering Polytechnic of Bandung 2. Holders a. D Holder (EL05003) Location Function : At the central between handle and blade : To hold the blade (D50 and D66 Scraper)

Properties : Made of metal or steel

Picture 7. EL05003

b. T Holder (EL06023) Location Function : At the central between handle and blade : To hold the blade (T50 and T70 Scraper)

Properties : Made of metal or steel

Picture 8. EL06023

4 Civil Engineering Polytechnic of Bandung

Civil Engineering Polytechnic of Bandung 3. Blades a. D50 BD5010 (d50 Scraper) Location Function : At the top of handle and holder : To produce a high degree between two flat surfaces

Properties : Made of steel

Picture 9. BD5010

b. D55 Carbide - BD0551 (D55 Scraper) Location Function : At the top of handle and holder : To produce a high degree between two flat surfaces

Properties : Made of steel

Picture 10. BD0551

5 Civil Engineering Polytechnic of Bandung

Civil Engineering Polytechnic of Bandung c. D66 BD6610 (D66 Scraper) Location Function : At the top of handle and holder : To produce a high degree between two curved surfaces

Properties : Made of steel

Picture 11. BD6610

d. D77 BD7701 (D77 Scraper) Location Function : At the top of handle and holder : To produce a high degree between two curved surfaces

Properties : Made of steel

Picture 12. BD 7710

e. T70 BT7000 (T70 Scraper) Location Function : At the top of handle and holder : To produce a high degree between two curved surfaces

Properties : Made of steel

6 Civil Engineering Polytechnic of Bandung

Civil Engineering Polytechnic of Bandung

Picture 13. BT7000

f. D55 Carbide BD0551 Location Function : At the top of handle and holder : To produce a high degree between two flat surfaces

Properties : Made of steel

Picture 14. BD0551

7 Civil Engineering Polytechnic of Bandung

You might also like