IPC Report

INSPECTION REPORT Report No:
Report Date:
INSPECTED ARTICLE(S)
A. GENERAL INFORMATION
Client Name P.O. Number 951

Vendor Name Item Number 458165
Inspection Date Product Name Travel Pink Hair Dryer
Booking/Shipment 3514pcs
Inspection Location Cixi, Zhejiang, China (10% (352pcs) Finished for inspection)
Total Quantity
Inspection Type Initial Production Check (IPC) Combined Sampling No
Approval Sample Technical File Product Spec Packing List P.O
Inspection Material
Other
B. INSPECTION RESULTS
OVERALL CONCLUSION Pending due to Remark#1-9
INSPECTION SUMMARY Conform Not Conform Pending Not Applicable Remark

Critical Check Point
(Details refer to section D) ✓
Visual and Workmanship
(Details refer to section E) ✓
Quantity Conformity
(Details refer to section F) ✓
Product & Product Package Conformity
(Details refer to section C) ✓ 1/2/3/4/5/6/7/8
Data Measurement / Field Test

(Details refer to section H) ✓ 9
C1. PROBLEM REMARKS
©www.testcoo.com All rights reserved Doc#: TC-IN-RF-E001 V5 2022-08-23 Email: service@testcoo.com Tel: 0571-8578 7282
The results reflects our findings at time and place of inspection. This report does not relieve seller/manufacturers from their contractual liabilities or prejudice buyers' right
for compensation for any apparent and/or hidden defects not detected during our random inspection or occuring thereafter. This report does not evidence shipment, Final
approval is required by client before releasing shipment.
Page 1 of 8
INSPECTION REPORT Report No:230913102572401R1
Report Date: 18-Sep-2023
1 The actual power cable does not have a cable tie, which is different form specifications
Actual find Spec.

2 The IM wrong printed as same contents on both front and back sides, which is different form specifications
Actual find Spec.

3 It is found that the folding mode and specifications of the instructions are different
Actual find Description

4 Actually found that the product color and specifications are different, actual product and the color of the product on the box are also
different
Page 2 of 8
product color and specifications are different The actual product and the color of the product on the box are different
5 The actual color of the product on the color box is different from the specifications
N/A
Actual find N/A

6 Actual FSC number (C177898) on the packaging sticker, but FSC number C147502 in the artwork.
7 Product color box has no plastic bag packaging, which is different form specifications
Page 3 of 8
8 There is no data check for the power label and price label of the product
Label on product Label on color box

9 Product size exceed the specifications, Please refer to the data sheet marked red for details
Measurement chart
C2. INFORMATIVE REMARKS
11 10pcs packed in color box and others 10% were finished production but not yet packed in box during inspection.
12 The factory did not provide customer signature samples.
13 3pcs bulk samples were sealed in factory and will deliver to customer.
14 The air outlet is actually transparent, and the product pictures on the data are also transparent, but the data requirements are white
Page 4 of 8
Actual find Spec.
D. Critical Check Point Back To Summary
Item# Remark content result
458165 Conform
458165 Conform
Conform
458165
E. Visual and Workmanship Back To Summary
Inspection Standard ANSI/ASQ Z1.4 Single Sampling Plan

Inspection Level Level-II
Defect Classification Critical Major Minor
AQL Not Allowed 0.65 1.5
Sample Size 80 80 50
Details of Defect Found Critical Major Minor
For Item#458165, Sample Size: 80
Dirty mark on the surface 0 0 2
Page 5 of 8
Total 0 0 2
Allowed 0 1 2
Result Within AQL
Note: You directed that your inspection be based upon Combined sampling, Testcoo advises all clients of the risks associated with "Combined Sampling" where
several different product styles are combined to make a single lot size. Combined Sampling represents an increased level of risk to you as statistical rules are
compromised and the chances of missing quality issues are much greater than during single style sampling. We disclaim any liability to you if you make decisions
concerning the acceptance, payment authorization, or shipment of the inspected goods based upon Combined Sampling.
For Item#458165
1 Defect-Dirty mark on the surface-5mm-mi 2 Defect-Dirty mark on the surface-3mm-mi
F. Quantity Conformity Back To Summary
Order Shipment Presented Qty

QTY Not
Item Packed Qty Packed Units Finished
P.O. No Quantity Qty Finished
Number (pieces/set Cartons(carto Not
(pieces/sets) (pieces/sets) (pieces/sets)
s) ns) Packed(pieces/sets)
458165 951 3514 3514 10 0 342 3162
Total 3514 3514 10 0 342 3162
Total N/A cartons were selected randomly
Selected carton number:N/A
G. Product and Package Against Approval Sample/Documents Back To Summary
Inspection Reference Contract

Check point Conform Not Conform Pending Not Applicable
Product Appearance ✓
Accessories ✓
Packing ✓
Labeling / Marking ✓
Packing method Back To Summary
For Item #458165

Unit Package Package: Color box
Page 6 of 8
Inner Packing Quantity: N/A Package: N/A

Outer Packing Quantity: N/A Package: N/A
Length: N/Acm Width: N/Acm Height: N/Acm Weight: N/A
Remark: N/A
H. Data Measurement / Field Test Back To Summary
Test Item Test Requirement Actual Finding Sample Size Test Result
Carton Size and Weight Conformance per Spec. and printed information
H1. 1 N/A 1 carton/ style N/A
Check If no specified tolerance, follow +/- 5%
Carton Assortment and Actual packing quantity /color /size /style
H2. N/A 1 carton /style N/A
Quantity Check assortment conforms to printed information.
Conformance per Spec. and printed information Refer to below
H3. Product Size Check 5pcs Pending
If no specified tolerance, follow +/- 3% chart
Conformance per Spec. and printed information Refer to below
H4. Product Weight Check 5pcs Conform
If no specified tolerance, follow +/- 3% chart
Must be able to be scanned and barcodes are
H5. Barcode Check No failure 5pcs Conform
correct as printed
According to ISTA-1A 1 corner, 3 edges, 6 sides,
H6. Carton Drop Test N/A 1 carton/ style N/A
drop 10 times
Check if the actual parts are compliance to the
parts list provided in assembly instruction
H7. Full Assembly Test Perform assembly by reviewing the No failure 5pcs Conform
manufacturer’s assembly instructions
Nonconformance is not allowed
Work at each function according to instruction
Complex Function 5pcs
H8. sheet and each functional point should be No failure Conform
Check
operated successfully.
H9. Smell Test No unwanted bad or irritative smell. No failure All samples Conform
Place 3M tape on the surface of selected sample
and cover the printing as much as possible.
Rub the strip with the fingers to insure total
surface contact.
Screen Printing Quality Lift one end of the tape and remove with a rapid, 5pcs
H10. No failure Conform
Check jerking motion.
Repeat this procedure for 5 times.
Examine if any loss of the printing or any printing
transfer onto the tape
Conduct the test for 1 second (5mA) at the
voltage required between the tested parts (the
voltage refer to the actual category product
requirement or otherwise refer to below. )
The testing voltage required:
H11. High voltage test For the USA/Canada markets: No failure Full samples Conform
1200Vac
For European markets:
class I 1000Vac
class II 2500Vac
no insulation breakdown
The power consumption /input power / current
must comply with product spec and safety
standard.
normally the tolerance should be between +5%
and -10%.
[for the appliances of US market]
Power consumption +5% / -10% of its marked rating
H12. check or input power/ [for all appliances <=25W rated power input ] No failure Full samples Conform
current check +20% of the rated power _____W
[for heating and combined appliances]:
[>25W and <=200W - spec.]
+/-10% of the rated power _____W
[>200W - spec.]
+5% / -10% of the rated power _____W
[ for motor operated appliances]:
Page 7 of 8
[>25W and <=300W - spec.]
+20% of the rated power _____W
[>300W - spec.]
+15% with the rated power _____W
The good condition samples should be operating
at full load (preferable) at least 4 hours at rated
voltage or time reference the user instruction if
H13. Power on check less than 4 hours. No failure 5pcs Conform
after testing the samples should pass the hi
voltage check, function check, earth continuity
check etc., and no defect found.
Check internal construction completement and
Internal workmanship
main components according with CDF
H14. and critical component No failure 5pcs Conform
(Constructional Data Form) or CCL (critical
check
components list )
Rubbing test for rating
label and adhesive Test Rub the rating label for 15 seconds with water,
H15. then for 15 seconds with petroleum spirits. No failure 5pcs Conform
for printing, marking
and logo
Drop the unit with power cord connected to
power supply IEC: 5 drops to hard wood surface
from 70cm height UL: 3 drops to hard wood
H16. Unit drop test surface from 36inches There shall not be safety No failure 5pcs Conform
issue after drop test, live parts shall not expose,
hi-pot test shall be passed, no burning occur
10cm away from the thermocouple, average
temperature 60-70℃ after 30 minutes of factory 64.9/65.8/63.2/6
H17. Temperature check 5pcs Actual find
standard test 2.3/67.6
The product is 100 cm away from the test

Wind speed 9.0/8.8/8.7/8.5/8
H18. instrument and the wind speed is greater than 8 5pcs Actual find
measurement .2
m/s
H19. Rotate speed test 17000-18000 R/S No failure 5pcs Actual find
H20. Noise Test <86dB No failure 5pcs Conform
After the product air inlet is blocked, the product
H21. Thermostat test stops working within 10 seconds, and can work No failure 5pcs Conform
normally after the product is cooled
Measurement chart Back To Summary
Sales Sales
Product Product size Carton Carton weight
Item No Checking Packaging Packaging
weight (g) (cm) size (cm) (kg)
weight (g) size (cm)
Spec. 348 21x6.5x18 N/A N/A N/A N/A
Sample 1 344 21.5x6.5x14.2 408 11.6x7x21.7
Sample 2 346 21.4x6.5x14.1 408 11.6x7x21.7
458165
Sample 3 343 21.6x6.5x14.2 408 11.6x7x21.7 N/A N/A
Sample 4 345 21.4x6.5x14.1 408 11.6x7x21.7
Sample 5 345 21.5x6.5x14.2 408 11.6x7x21.7
VALIDATION TEAM
Inspected by Inspection date

Reviewed by Review date
Approved by Review date
PHOTOS Back To Summary
1 Item#458165
Page 8 of 8
Color Box View Color Box View
Page 9 of 8
Color Box View Unit Package
Page 10 of 8
Unit Package Unit Package
Unit Package Instruction
Instruction Product View
Page 11 of 8
Product View Product View
Product View Label
Page 12 of 8
Page 13 of 8
Product View Plug
Plug Power cable
N/A
Power cable N/A

2 Test
Page 14 of 8
Color Box Weight Check Color Box Weight Check
Color Box Size Color Box Size
Color Box Size Color Box Size
Page 15 of 8
Color Box Size Product Weight Check
Product Weight Check Product Size
Product Size Product Size
Page 16 of 8
Product Size Product Size
Product Size Length of power cable
Length of power cable Barcode check
Page 17 of 8
3M Test 3M Test
3M Test 3M Test
Rubbing test Rubbing test
Page 18 of 8
High voltage test High voltage test
Function and power test Function and power test
Function and power test Function and power test
Page 19 of 8
Function and power test Thermostat test
Thermostat test Thermostat test
Function test Temperature check
Page 20 of 8
Temperature check Drop test
Drop test Wind speed measurement
Wind speed measurement Rotate speed test
Page 21 of 8
Rotate speed test Noise Test
Noise Test Noise Test
Power cable tension check Power cable tension check
Page 22 of 8
Power on test Color check
Color check Color check
N/A
Color check N/A

3 Internal
Page 23 of 8
Internal check Internal check
Page 24 of 8
Page 25 of 8

5 Other
Page 26 of 8
The factory gate The factory gate
Unpackaged products Sample
6 sides of color box 6 sides of color box
Page 27 of 8
End of this report
Page 28 of 8

IPC Report

Uploaded by

Copyright:

Available Formats

IPC Report

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

IPC Report

Uploaded by

Copyright:

Available Formats

INSPECTION REPORT Report No:

Client Name P.O. Number 951

OVERALL CONCLUSION Pending due to Remark#1-9

INSPECTION SUMMARY Conform Not Conform Pending Not Applicable Remark

Data Measurement / Field Test

C1. PROBLEM REMARKS

Actual find Spec.

Actual find Spec.

Actual find Description

Actual find N/A

Label on product Label on color box

C2. INFORMATIVE REMARKS

Actual find Spec.

D. Critical Check Point Back To Summary

Item# Remark content result

E. Visual and Workmanship Back To Summary

Inspection Standard ANSI/ASQ Z1.4 Single Sampling Plan

1 Defect-Dirty mark on the surface-5mm-mi 2 Defect-Dirty mark on the surface-3mm-mi

F. Quantity Conformity Back To Summary

Order Shipment Presented Qty

G. Product and Package Against Approval Sample/Documents Back To Summary

Inspection Reference Contract

Packing method Back To Summary

For Item #458165

Inner Packing Quantity: N/A Package: N/A

H. Data Measurement / Field Test Back To Summary

The product is 100 cm away from the test

Measurement chart Back To Summary

Inspected by Inspection date

PHOTOS Back To Summary

Color Box View Color Box View

Color Box View Color Box View

Color Box View Color Box View

Color Box View Color Box View

Color Box View Color Box View

Color Box View Unit Package

Unit Package Unit Package

Unit Package Instruction

Instruction Product View

Product View Product View

Product View Product View

Product View Label

Product View Product View

Product View Product View

Product View Product View

Product View Plug

Plug Power cable

Power cable N/A

Color Box Weight Check Color Box Weight Check

Color Box Size Color Box Size

Color Box Size Color Box Size

Color Box Size Product Weight Check

Product Weight Check Product Size

Product Size Product Size

Product Size Product Size

Product Size Length of power cable

Length of power cable Barcode check

Rubbing test Rubbing test

High voltage test High voltage test

Function and power test Function and power test