Catalogo KSB SPBloc
Catalogo KSB SPBloc
Catalogo KSB SPBloc
SPbloc
SPbloc
SPnorm
SPnorm & SPbloc
Self Priming Centrifugal Pumps
SPnorm & SPbloc - Self Priming Centrifugal Pumps
Design
SPnorm:
* SPbloc 15M is available in both single as well as 3 phase. As a standard, 15M is supplied with mechanical seal arrangement,
however can also be supplied with gland packing. All other sizes are standard gland packed & optionally available in mechanical seal arrangement.
# as viewed from suction side CW - clockwise ACW - Anticlockwise
Note: Performance applicable to liquid of specific gravity 1 & viscosity same as water.
Self Priming Mud Mono Pumpset
Solid
Direction of
Model RPM handling 6 8 10 12 14 15 16 18 19 20 22 24 25 26 28 30 32 34 36 38 40 42 44 46 48 50
kW HP rotation#
size, mm
Discharge in m3/hr
SPnorm-23 S 9.30 12.5 1450 23 CW 137 128 119 114 109 101 95 88 78 64 55 46 20
SPnorm-60 15.00 20 1450 34 ACW 225 211 198 191 183 166 155 144 114 80
SPnorm-60 S 18.50 25 1450 40 ACW 253 246 232 225 218 199 189 177 148 115 91 67
SPnorm-23 S 10.50 14.00 1500 23 CW 137 128 119 114 109 101 95 88 78 64 55 46 20
SPnorm-60 16.50 22.00 1500 34 ACW 225 211 198 191 183 166 155 144 114 80
SPnorm-60 S 19.50 26.00 1500 40 ACW 253 246 232 225 218 199 189 177 148 115 91 67
* SPbloc 15M is available in both single as well as 3 phase. As a standard, 15M is supplied with mechanical seal arrangement,
however can also be supplied with gland packing. All other sizes are standard gland packed & optionally available in mechanical seal arrangement.
# as viewed from suction side CW - clockwise ACW - Anticlockwise
Note: Performance applicable to liquid of specific gravity 1 & viscosity same as water.
Cross Sectional View - SPnorm 14 (Reference Drawing)
43
41
42
45
44
1
37
32
31
28
29
7
30 6
2
8
9
12
33 19 13 10
36
35
34
38
72 73
40
39
23
55
22
24
47
46
3 4 5 14 20 21 17 18 15 16 48 52 50 49 56 53 54
29 Stud with Nut for Suction housing 4 M.S. 73 Key for Coupling 1 M.S.
24 Stud with Nut for Insp. window cover 2 M.S. CRNO Gr. M-47 &
56 Rotar Shaft 1
EN-8D
23 Packing for Insp. window cover 1 Paper
55 Cheese Head Screw for Bearing cover (DE side) 4 M.S
22 Insp window cover 1 C.I. Gr. FG-260
54 Bearing Cover (DE side) 1 C.I. Gr. FG-260
21 Gasket 1 Paper
53 Bearing (DE side) 1 Steel
20 Shaft Sleeve 1 S.S. Gr. AISI410
52 Cheese Head Screw for Bearing cover (NDE side) 3 M.S.
19 Grease Cup with Pipe Nipple 1 M.S.
50 Bearing Cover (NDE side) 1 C.I. Gr. FG-260
18 Lantern ring 1 Plastic
49 Bearing (NDE side) 1 Steel
1
17 Gland Packing Graphite Asbestos 48 Water Deflector 1 Rubber
Set
16 Hex. bolt or Stud with Nut for Gland cover 2 M.S. 47 O-Ring for Drain Plug 1 Rubber
15 Gland Cover 1 C.I. Gr. FG-260 46 Drain Plug 1 C.I. Gr. FG-260
14 Packing for Stuffing Box Housing 1 Paper 45 O-Ring for Water Plug 1 Rubber
13 Stuffing Box Housing 1 C.I. Gr. FG-260 44 Water Plug (for Priming) 1 C.I. Gr. FG-260
Stud with Nut for Brg. housing & St. box 43 Stud with Nut for Delivery flange 4 M.S.
12 8 M.S.
housing 42 Packing for Delivery flange 1 Rubber
11 Packing for Bearing housing 3 Paper 41 Delivery flange 1 C.I. Gr. FG-260
10 Bearing Housing 1 C.I. Gr. FG-260 40 Stud with Nut for Suction flange 4 M.S
9 Counter Sunk Screw for Wearing Plate 3 S.S. Gr. AISI304 39 Packing Suction Flange 1 Rubber
8 Wearing Plate (DE) 1 C.I. Gr. FG-260 38 Suction Flange 1 C.I. Gr. FG-260
7 Counter Sunk Screw for Wearing Plate 3 S.S. Gr. AISI304 37 Cheese Head Screw for Wt. fixing 2 M.S
6 Wearing Plate (NDE) 1 C.I. Gr. FG-260 36 Washer for Flap valve 1 M.S.
5 Key for Impeller Nut 1 M.S. 35 Hex. bolt with Nut for Flap valve 1 M.S.
4 Washer for Impeller Nut 1 M.S. 34 Weight for Flap valve (big) 1 C.I. Gr. FG-260
3 Impeller Nut 1 M.S. 33 Weight for Flap valve (medium) 1 C.I. Gr. FG-260
2 Impeller 1 C.I. Gr. FG-260 32 Weight for Flap valve (Small) 1 C.I. Gr. FG-260
1 Pump Body 1 C.I. Gr. FG-260 30 Flap valve 1 Nitril Rubber
Part no Part Description Qty Material Part no Part Description Qty Material
Cross Sectional View - SPbloc 14M (Reference Drawing)
43
41
42
45
44
1
37
32
31
28
29
7
30 6
67
2 65
8
9 55
12 69
33 19 68
66
13 10 52
36
35
34
38
40
39
23
22
24
47
46
3 4 5 14 20 21 17 18 15 16 56 48 50 49 51 57 59 60 61 58 62 51 54 63 64
37 Cheese Head Screw for Wt. fixing 2 M.S 69 Cheese Head Screw for Terminal 4 M.S.
36 Washer for Flap valve 1 M.S. 68 Terminal 1 Bakelite
35 Hex. bolt with Nut for Flap valve 1 M.S. 67 Cheese Head Screw for Terminal Box 4 M.S.
34 Weight for Flap valve (big) 1 C.I. Gr. FG-260 66 Packing for Terminal Box 1 Rubber
33 Weight for Flap valve (Medium) 1 C.I. Gr. FG-260 65 Terminal Box 1 C.l. or M.S. Sheet
32 Weight for Flap valve (Small) 1 C.I. Gr. FG-260 64 Fan Cover 1 M.S. Sheet
31 Packing for Flap valve 1 Paper 63 Fan 1 Plastic
30 Flap valve 1 Nitril Rubber 62 End Cover 1 C.I. Gr. FG-260
29 Stud with Nut for Suction housing 4 M.S. 61 Washer for Motor Adjustment Bolt 1 M.S.
28 Suction Housing 1 C.I. Gr. FG-260 60 Motor Adjustment Bolt 1 M.S.
24 Stud with Nut for Insp. window cover 2 M.S. 59 Motor Body 1 C.I. Gr. FG-260
23 Packing for Insp. window cover 1 Paper
58 Stator Winding 1 Copper
22 Insp window cover 1 C.I. Gr. FG-260
57 Stator 1 CRNO Gr. M-47
21 Gasket 1 Paper
CRNO Gr. M-47 &
20 Shaft Sleeve 1 S.S. Gr. AISI410 56 Rotar Shaft 1
EN-8D
19 Grease Cup with Pipe Nipple 1 M.S. 55 Cheese Head Screw for Bearing cover (DE side) 4 M.S
18 Lantern ring 1 Plastic 54 Bearing Cover (DE side) 1 C.I. Gr. FG-260
1 53 Bearing (DE side) 1 Steel
17 Gland Packing Graphite Asbestos
Set
Cheese Head Screw for Bearing cover
16 Hex. bolt or Stud with Nut for Gland cover 2 M.S. 52 4 M.S
(NDE side)
15 Gland Cover 1 C.I. Gr. FG-260 51 Bearing Cover (In Side) 1 C.I. Gr. FG-260
14 Packing for Stuffing Box Housing 1 Paper
50 Bearing Cover ( Out side) 1 C.I. Gr. FG-260
13 Stuffing Box Housing 1 C.I. Gr. FG-260
49 Bearing (NDE side) 1 Steel
Stud with Nut for Brg. housing & St. box
12 8 M.S. 48 Water Deflector 1 Rubber
housing
10 Bearing Housing 1 C.I. Gr. FG-260
47 O-Ring for Drain Plug 1 Rubber
9 Counter Sunk Screw for Wearing Plate 1 S.S. Gr. AISI304 46 Drain Plug 1 C.I. Gr. FG-260
8 Wearing Plate (DE) 1 C.I. Gr. FG-260 45 O-Ring for Water Plug 1 Rubber
7 Counter Sunk Screw for Wearing Plate 3 S.S. Gr. AISI304 44 Water Plug (for Priming) 1 C.I. Gr. FG-260
6 Wearing Plate (NDE) 1 C.I. Gr. FG-260 43 Stud with Nut for Delivery flange 4 M.S.
5 Key for Impeller Nut 1 M.S. 42 Packing for Delivery flange 1 Rubber
4 Washer for Impeller Nut 1 M.S. 41 Delivery flange 1 C.I. Gr. FG-260
3 Impeller Nut 1 M.S. 40 Stud with Nut for Suction flange 4 M.S
2 Impeller 1 C.I. Gr. FG-260 39 Packing Suction Flange 1 Rubber
1 Pump Body 1 C.I. Gr. FG-260 38 Suction Flange 1 C.I. Gr. FG-260
Part No. Description Qty Material Part No. Description Qty Material
KSB Pumps and Valves - We are where you are
North : Bhubaneswar :
N5/39,1st Floor, IRC Village, Nayapalli,
KSB House, A-96, Sector IV, NOIDA, Bhubaneswar - 751 015.
Dist. Gautam Budh Nagar - 201 301. Tel.: 0674-255 8497
Tel.: 0120-254 1091 Fax : 0674-255 8499
Fax : 0120-255 0567
Chandigarh :
1229.02-EN