20230510 KT393 Dt&C Co., Ltd. PM Eng (최종)

No.
KT393
03. Electrical Testing

03.004 Electrical materials and components
Materials/ Standard Field

Test method Test range Site
Products designation testing
Secondary cells and
batteries containing
alkaline or other non -
acid electrolytes - Safety
requirements for Temperature: Max.
portable sealed 130 °C
EN 62133- Electrical secondary cells, and for Force: Max. 13 kN
2:2017/AMD1:202 materials and batteries made Vibration frequency: (7 SF-3 N
1 components from them, for use in ∼ 200) Hz
portable applications – Resistance: (80 ± 20)
Part 2: Lithium mΩ
systems[Exception]
7.3.9 Design evaluation
– Forced internal short
cirtcuit(cells)
Temperature: (-20 ∼
Lithium ion cells and +130) °C
Electrical batteries used in Force: Max. 13 kN
GB 31241-2014 materials and portable electronic Vibration frequency: SF-3 N
components equipments (10 ∼ 55) Hz
– Safety requirements Resistance: (80 ± 20)
mΩ
Fire hazard testing – Part Temperature: (0 ∼

Electrical
IEC 60695-10- 10-2: Abnormal heat – 200) °C
materials and SF-3 N
2:2014 Ball pressure test
components Force: (20 ± 0.2) N
method
Secondary cells and

alkaline or other non-
acid electrolytes - Temperature: (-20 ∼
Secondary lithium cells
Electrical +40) °C
materials and and batteries for
IEC 61960-3:2017 Frequency: (1.0 ± 0.1) SF-3 N
portable applications -
components Part 3: Prismatic kHz
and ESD: Max. 8 Kv
cylindrical lithium
secondary cells and
batteries made from
them
2/433
No. KT393

Secondary cells and
acid electrolytes – Safety
Electrical secondary cells, and for Force: Max. 13 kN
IEC 62133-2:2017 materials and batteries made from Vibration frequency: (7 SF-3 N
components them, for use in ∼ 200) Hz
Part 2: Lithium systems mΩ
[Exception]
- Forced internal short
cirtcuit(cells)
Secondary cells and

alkaline or other non -
acid electrolytes - Safety
IEC 62133- Electrical secondary cells, and for Force: Max. 13 kN
2:2017/AMD1:202 materials and batteries made Vibration frequency: (7 SF-3 N
1 components from them, for use in ∼ 200) Hz
Part 2: Lithium mΩ
systems[Exception]
– Forced internal short
cirtcuit(cells)
Secondary cells and

acid electrolytes – Safety Temperature: (-20 ∼
requirements for +130) °C
portable sealed
Electrical Force: Max. 13 kN
materials and secondary cells, and for
IEC 62133:2012 Vibration frequency: SF-3 N
components them, for use infrom
batteries made (10 ∼ 55) Hz
Resistance: (80 ± 20)
portable applications mΩ
[Exception]
- Forced internal short
cirtcuit(cells)
3/433
No. KT393

Secondary cells and
acid electrolytes – Safety Charging/Discharging:
requirements Max. 60 V, 20 A
for portable sealed Temperature: (-20 ∼
Electrical secondary cells, and for +130) °C
KC 62133-2:2020 materials and batteries made from Force: Max. 13 kN SF-3 N
components them, for use in Vibration frequency: (7
portable applications – ∼ 200) Hz
Part 2: Lithium systems Resistance: (80 ± 20)
[Exception] mΩ
7.3.9 Design evaluation-
Forced internal short
circuit(cells)
Temperature: (-40 ∼
Manual of Tests and
ST/SG/AC.10/11/R Electrical 170) °C
Criteria
ev.7/Amendment. materials and Force: Max. 13 kN SF-3 N
(38.3 Lithium metal and
1:2021 components Vibration frequency: (7
lithium ion batteries) ∼ 200) Hz
4/433
No. KT393

03.005 Measuring instruments

Safety requirements for
electrical equipment for
measurement, control, Supply voltage(AC):
and laboratory use – Part Max. 500 V
Measuring
IEC 61010-2- 2-040: Particular Temperature: Max. SF-1 N
instruments
040:2020 (Ed. 3.0) requirements for 200 °C
sterilizers and washer- Pressure: Max. 35 Mpa
disinfectors used to treat
medical materials

measurement, control, Supply voltage(AC):
Measuring and laboratory use – Part Max. 500 V
IEC 61010-2- SF-1 N
instruments 2-101: Particular Electric Strength: Max.
101:2018 (Ed. 3.0) requirements for in vitro 10 kV
diagnostic (IVD) medical
equipment
Supply voltage(AC):
Safety requirement for Max. 500 V
electrical equipment for Max. 10 Strength
Electric :
IEC 61010-1: Measuring kV
2010+AMD1:2016 measurement, control SF-1 N
instruments Leakage Current: Max.
(Ed. 3.1) and laboratory use – Part 500 mA
1: General requirements Temperature: Max.
200 °C
Safety requirement for

electrical equipment for Supply voltage(AC) :
measurement, control Max. 500 V
and laboratory use - Part Electric Strength : Max.
IEC 61010-1:2001 Measuring 1: General requirements 10 kV SF-1 N
(Ed. 2.0) instruments [Exception] Leakage Current: Max.
12.3 UV Radiation 500 mA
12.6 Laser Source Temperature: Max.
13.2.3 Implosion of 200 °C
cathode ray tubes

and laboratory use - Part Electric Strength : Max.
IEC 61010-1:2010 Measuring 1: General requirements 10 kV SF-1 N
(Ed. 3.0) instruments [Exception] Leakage Current: Max.
12.3 UV Radiation 500 mA
12.6 Laser Source Temperature: Max.
13.2.3 Implosion of 200 °C
cathode ray tubes
5/433
No. KT393

measurement, control Supply voltage(AC) :
and laboratory use -
IEC 61010-2- Measuring Max. 500 V
Part 2-010: Particular SF-1 N
010:2003 (Ed. 2.0) instruments Temperature: Max.
requirements for 200 °C
laboratory equipment
for the heating of
materials

IEC 61010-2- Measuring Leakage Current: Max.
Part 2-010: Particular SF-1 N
010:2014 (Ed. 3.0) instruments 500 mA
laboratory equipment 200 °C
for the heating of
materials

and laboratory use - Part
IEC 61010-2- Measuring Leakage Current : Max.
2-010: Particular SF-1 N
010:2019 (Ed. 4.0) instruments 500 mA
laboratory equipment 200 °C
for the heating of
materials
Safety requirements for Supply voltage(AC) :

electrical equipment for Max. 500 V
measurement, control,
IEC 61010-2- Measuring Temperature: Max.
and laboratory use - SF-1 N
020:2006 (Ed. 2.0) instruments 200 °C
Part 2-020: Particular Length: Max. 1 500
requirements for mm
laboratory centrifuges
Safety requirements for Supply voltage(AC) :

electrical equipment for Max. 500 V
IEC 61010-2- Measuring Temperature: Max.
and laboratory use - Part SF-1 N
020:2016 (Ed. 3.0) instruments 200 °C
2-020: Particular Length: Max. 1 500
requirements for mm
laboratory centrifuges

measurement, control Supply voltage(AC) :
and laboratory use - Max. 500 V
IEC 61010-2- Measuring Part 2-040: Particular Temperature: Max. SF-1 N
040:2005 (Ed. 1.0) instruments requirements for 200 °C
medical materials
6/433
No. KT393

measurement, control, Supply voltage(AC) :
and laboratory use - Part Max. 500 V
IEC 61010-2- Measuring 2-040: Particular Temperature: Max. SF-1 N
040:2015 (Ed. 2.0) instruments requirements for 200 °C
medical materials

IEC 61010-2- Measuring and laboratory use - Supply voltage(AC) :
051:2003 SF-1 N
instruments Part 2-051: Particular Max. 500 V
(Ed. 2.0) requirements for
for mixing and stirring

IEC 61010-2- Measuring and laboratory use - Part Supply voltage(AC) : SF-1 N
051:2015 (Ed. 3.0) instruments 2-051: Particular Max. 500 V
requirements for

requirements for

and laboratory use – Part
IEC 61010-2- Measuring 2-081: Particular Supply voltage(AC) : SF-1 N
081:2015 (Ed. 2.0) instruments requirements for Max. 500 V
automatic and semi-
automatic laboratory
equipment for analysis
and other purposes

electrical equipment
for measurement,
control, and laboratory
IEC 61010-2- Measuring use – Part 2-081: Supply voltage(AC) : SF-1 N
081:2019 instruments Particular requirements Max. 500 V
for automatic and semi-
and other purposes
7/433
No. KT393

measurement, control
IEC 61010-2- Measuring and laboratory use - Supply voltage(AC) :
101:2002 SF-1 N
instruments Part 2-101: Particular Max. 500 V
(Ed. 1.0) requirement for in vitro
equipment

requirements for in vitro
equipment

IEC 61010-2- Measuring Part 2-081: Particular Supply voltage(AC) :
81:2001 SF-1 N
instruments requirements for Max. 500 V
+A1:2003(Ed. 1.1) automatic and semi-
and other purposes
8/433
No. KT393

03.007 Electrical machinery for households

Audio/video,
information Water: (1 ~ 8) level
and communication
Electrical Supply voltage: Max.
AS/NZS 62368- machinery for technology equipment – 600 V SF-3 N
1:2018 Part 1: Safety
households requirements Temperature: Max.
200 °C
(Annex F.3.7)
(Annex M)
9/433
No. KT393

Audio/video,
information and
communication
technology equipment
–Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
Thermoplastic parts on
which conductive
metallic parts are
directly mounted (Vicat
test B 50 of
ISO 306)
Cl. 5.4.2, 5.4.3 and
5.4.4: Clearances,
creepage distance, solid
insulation (Impulse test,
Mandrel test)
Cl. 5.6.4.1:
Determination of the
overcurrent protective
device and circuit
(Annex R)
Cl. 10: Radiations (Laser,
LED, X-Ray, UV) Supply voltage: Max.
Annex G.7: Mains 600 V
supply cords (Test Temperature: Max.
Electrical
AS/NZS 62368- machinery for equipment according 200 °C SF-1 N
1:2018 IEC 60227) Electric Strength: Max.
households Annex G.9: IC current 3 kV
limiters Touch Current: Max.
Annex G.10: Test for 10 mA
resistor serving as
safeguard (Impulse test
generator circuit 2 of
Table D.1)
Annex G.13.6.2:
Abrasion resistance test
Annex G.15: Pressurized
liquid filled components
(Tubing and fittings
compatibility test)
Annex J: Insulated
winding wires for use
without interleaved
insulation
Annex M.8.2: Protection
against internal ignition
from external spark
sources (Spark Test)
Annex S.3: Flammability
tests for the bottom of a
fire enclosure
Annex U: Mechanical
strength of CRTs and
protection against the
effects of implosion
10/433
No. KT393

Audio/video,
information and
communication Water: (1 ~ 8) level
Electrical Supply voltage:(AC):
AS/NZS 62368- machinery for –Part 1: Safety Max. 600 V SF-3 N
1:2022 requirements
households (Annex F.3.7) Temperature: Max.
200 °C
(Annex M)
(Annex Y3.2)
(Annex Y.5)
11/433
No. KT393

Audio/video,
information and
communication
–Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
which conductive
metallic parts are
test B 50 of
ISO 306)
Cl. 5.4.2, 5.4.3, 5.4.4
and Annex X:
Clearances, creepage
distance, solid insulation
(Mandrel (figure 25 to
28), metal foil,
equipment suitable for
electrical strength test
loads, Stop watch,
weight)
Cl. 5.6.4.1:
overcurrent protective Supply voltage: Max.
device and circuit 600 V
(Annex R) Temperature: Max.
Electrical
AS/NZS 62368- machinery for Cl. 10: Radiations (Laser 200 °C SF-1 N
1:2022 (including laser diodes), Electric Strength: Max.
households Light emitting diodes 3 kV
(LEDs), Image Projector, Touch Current: Max.
X-ray, Effect of UV 10 mA
radiation on materials
(Annex C), Human
exposure to UV
radiation (Annex C))
Annex C: UV radiation
Annex G.5.3.4: Test for
FIW
Annex G.7: Mains
supply
cords (Test equipment
according IEC 60227)
Annex G.9: IC current
limiters
Annex G.13.6.2:
Annex G.15: Hydrostatic
pressure, Tubing and
fittings compatibility
test, Vibration test
Annex J: Insulated
winding
wires for use without
interleaved insulation
Annex M.7:
Concentration of
hydrogen gas
12/433
No. KT393

from
external spark sources
(Spark Test)
Annex S: Tests for
resistance to heat and
fire(Distillate fuel oil as
described in annex
S.3.2)
Annex P.4: Metallized
coatings and adhesives
securing parts
Annex R: Limited Short-
circuit test
Annex U: Mechanical
Annex Y.2(Annex C):
Ultraviolet light
conditioning test
Annex Y.3: Resistance
to corrosion, water
borne contaminants
Annex Y.3.3: Water-
sulphur dioxide test
Annex Y.4.3: Tensile
strength and elongation
tests
Annex Y.4.4:
Compression test
Annex Y.4.5: Oil
resistance
Audio/video,
information and
CSA C22.2 No. Electrical Supply voltage: Max.
machinery for –Part 1: Safety
62368-1:19 Third 600 V SF-3 N
requirements
Edition households (Annex F.3.7) Temperature: Max.
200 °C
(Annex M)
(Annex Y3.2)
(Annex Y.5)
13/433
No. KT393

Audio/video,
information and
communication
–Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
which conductive
metallic parts are
test B 50 of
ISO 306)
Cl. 5.4.2, 5.4.3, 5.4.4
and Annex X:
28), metal foil,
loads, Stop watch,
weight)
Cl. 5.6.4.1:
CSA C22.2 No. Electrical
machinery for Cl. 10: Radiations (Laser 200 °C
62368-1:19 Third SF-1 N
(including laser diodes), Electric Strength: Max.
Edition households Light emitting diodes 3 kV
(Annex C), Human
exposure to UV
FIW
Annex G.7: Mains
supply
limiters
Annex G.13.6.2:
Annex J: Insulated
winding
Annex M.7:
Concentration of
hydrogen gas
14/433
No. KT393

from
(Spark Test)
Annex S: Tests for
described in annex
S.3.2)
securing parts
circuit test
Annex U: Mechanical
Annex Y.2(Annex C):
Ultraviolet light
conditioning test
to corrosion, water
borne contaminants
Annex Y.3.3: Water-
tests
Annex Y.4.4:
Compression test
Annex Y.4.5: Oil
resistance
Audio/video,
information and Water: (1 ~ 8) level
communication
EN 62368- for technology equipment –
1:2014+A11:2017 machinery 600 V SF-3 N
Part 1: Safety
200 °C
(Annex F.3.7)
(Annex M)
15/433
No. KT393

Audio/video,
information and
communication
–Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
which conductive
metallic parts are
test B 50 of
ISO 306)
Cl. 5.4.2, 5.4.3 and
5.4.4: Clearances,
Mandrel test)
Cl. 5.6.4.1:
device and circuit
(Annex R)
LED, X-Ray, UV) Supply voltage: Max.
Annex G.7: Mains 600 V
supply cords (Test Temperature: Max.
Electrical
EN 62368- for equipment according 200 °C
1:2014+A11:2017 machinery SF-1 N
IEC 60227) Electric Strength: Max.
households Annex G.9: IC current 3 kV
limiters Touch Current: Max.
Annex G.10: Test for 10 mA
resistor serving as
Table D.1)
Annex G.13.6.2:
compatibility test)
Annex J: Insulated
without interleaved
insulation
from external spark
sources (Spark Test)
Annex S.3: Flammability
tests for the bottom of a
fire enclosure
Annex U: Mechanical
16/433
No. KT393

Audio/video,
information and
EN IEC 62368- for –Part 1: Safety
1:2020+A11:2020 machinery 600 V SF-3 N
requirements
200 °C
(Annex M)
(Annex Y3.2)
(Annex Y.5)
17/433
No. KT393

Audio/video,
information and
communication
–Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
which conductive
metallic parts are
test B 50 of
ISO 306)
Cl. 5.4.2, 5.4.3, 5.4.4
and Annex X:
28), metal foil,
loads, Stop watch,
weight)
Cl. 5.6.4.1:
Electrical
EN IEC 62368- Cl. 10: Radiations (Laser 200 °C
machinery for SF-1 N
1:2020+A11:2020 households (including laser diodes), Electric Strength: Max.
Light emitting diodes 3 kV
(Annex C), Human
exposure to UV
FIW
Annex G.7: Mains
supply
limiters
Annex G.13.6.2:
Annex J: Insulated
winding
Annex M.7:
Concentration of
hydrogen gas
18/433
No. KT393

from
(Spark Test)
Annex S: Tests for
described in annex
S.3.2)
securing parts
circuit test
Annex U: Mechanical
Annex Y.2(Annex C):
Ultraviolet light
conditioning test
to corrosion, water
borne contaminants
Annex Y.3.3: Water-
tests
Annex Y.4.4:
Compression test
Annex Y.4.5: Oil
resistance
Household and similar

Electrical electrical appliances -
IEC 60335-1:2010 machinery for Safety - Part 1: General Water: (1 ~ 8) level SF-3 N
households requirements
(Clause 15.1 15.1.1)
19/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
Output Current: Max.
Household and similar 100 A
electrical appliances - Frequency: Max. 100
Safety - Part 1: General MHz
requirements Temperature: Max.
[Exception] 300 ℃
Electrical Clause 22.32 - Rubber Resistance to heat and
IEC 60335-1:2010 machinery for aging test SF-1 N
fire Temperature: Max.
households Annex F - Capacitors 960 ℃
Annex H - Switches Humidity: Max. 96 %
Annex J - Coated R.H.
printed circuit boards Electric Strength: Max.
Annex R - Software 10 kV
evaluation Touch Current: Max. 5
mA
Weight: Max. 150 Kg
Angle: Max. 360 °

IEC 60335- machinery for Safety - Part 1: General Water: (1 ~ 8) level SF-3 N
1:2010+A1:2013 households requirements
(Clause 15.1 15.1.1)
Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
Electrical Clause 22.32 - Rubber
IEC 60335- Resistance to heat and
machinery for aging test SF-1 N
1:2010+A1:2013 fire Temperature: Max.
Annex J - Coated R.H.
Annex R - Software 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °

IEC 60335- machinery for Safety - Part 1: General Water: (1 ~ 8) level SF-3 N
1:2010+A2:2016 households requirements
(Clause 15.1 15.1.1)
20/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
Electrical Clause 22.32 – Rubber
IEC 60335- Resistance to heat and
machinery for aging test SF-1 N
1:2010+A2:2016 fire Temperature:
households Annex F - Capacitors Max. 960 ℃
Annex H - Switches Humidity: Max. 96
Annex J - Coated %R.H.
Annex R – Software 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °

IEC 60335-1:2020 machinery for Safety - Part 1: General Water: (1 ~ 8) level SF-3 N
households requirements
(Clause 15.1 15.1.1)
Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
Electrical Clause 22.32 – Rubber Resistance to heat and
IEC 60335-1:2020 machinery for aging test SF-1 N
fire Temperature:
households Annex F - Capacitors Max. 960 ℃
Annex H - Switches Humidity: Max. 96
Annex J - Coated %R.H.
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
21/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
Household and similar 300 ℃
IEC 60335-2- Electrical electrical appliances - Resistance to heat and
11:2008 machinery for Safety - Part 2-11: SF-1 N
+A1:2012 households Particular requirements 960 ℃
for tumble dryers Humidity: Max. 96 %
R.H.
Electric Strength: Max.
10 kV
Touch Current: Max. 5
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
IEC 60335-2- Resistance to heat and
11:2008+A2:2015 households Safety
machinery for - Part 2-11: SF-1 N
Particular requirements 960 ℃
for tumble dryers Humidity: Max. 96
%R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
22/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
machinery for Safety - Part 2-11: SF-1 N
11:2019 fire Temperature: Max.
households Particular requirements 960 ℃
for tumble dryers Humidity: Max. 96
%R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Household and similar Temperature: Max.
electrical appliances – 300 ℃
IEC 60335-2- Electrical Safety – Part 2-13: Resistance to heat and
13:2009 + machinery for Particular requirements SF-1 N
AMD1:2016 households for deep fat fryers, 960 ℃
frying pans and similar Humidity: Max. 96 %
appliances R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
23/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
electrical appliances - 300 ℃
IEC 60335-2- Electrical Safety - Part 2-14: Resistance to heat and
14:2006 machinery for Particular requirements SF-1 N
+A1:2008 households for kitchen machines 960 ℃
[Exception] Humidity: Max. 96 %
Clause 25.7 - Addition R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
electrical appliances -
IEC 60335-2- 300 ℃
Electrical Safety - Part 2-14:
14:2006 Resistance to heat and
+A1:2008+A2:201 households Particular
machinery for requirements SF-1 N
for kitchen machines
2 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
24/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Household and similar Frequency: Max. 100
electrical appliances - MHz
Safety - Part 2-15: Temperature: Max.
IEC 60335-2- Particular requirements 300 ℃
Electrical
15:2002 for for appliances for Resistance to heat and
+A1:2005+A2:200 machinery SF-1 N
heating liquids fire Temperature: Max.
households [Exception]
8 960 ℃
22.103 - Durability test Humidity: Max. 96 %
of appliance coupler of R.H.
cordless appliances Electric Strength: Max.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Electrical
IEC 60335-2- machinery for for appliances for Resistance to heat and SF-1 N
15:2012 heating liquids fire Temperature: Max.
households [Exception] 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
25/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
IEC 60335-2- Electrical
15:2012/AMD1:20 machinery for for appliances for Resistance to heat and SF-1 N
16 households [Exception] 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
15:2012/AMD2:20 machinery for for appliances for Resistance to heat and SF-1 N
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
26/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
households Particular requirements fire Temperature: Max.
+A1:2008 960 ℃
for food waste disposers Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
IEC 60335-2- 300 ℃
+A1:2008+A2:201 machinery for Safety - Part 2-16: SF-1 N
households Particular requirements fire Temperature: Max.
1 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
27/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
IEC 60335-2- electrical appliances - 300 ℃
Electrical
21:2002 Safety - Part 2-21: Resistance to heat and
+A1:2004+A2:200 machinery for SF-1 N
Particular requirements fire Temperature: Max.
households
8 for storage water 960 ℃
heaters Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
IEC 60335-2- machinery for Safety - Part 2-21: Resistance to heat and SF-1 N
21:2012 households for storagerequirements
Particular fire Temperature: Max.
water 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
28/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
21:2012/AMD1:20 machinery for Safety - Part 2-21: Resistance to heat and SF-1 N
households for storagerequirements
18 water 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
electrical appliances 300 ℃
machinery for Particular requirements Resistance
–Safety – Part 2-23: to heat and
23:2003 SF-1 N
+A1:2008 households for appliances for skin or 960 ℃
hair care Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
29/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
IEC 60335-2- electrical appliances 300 ℃
Electrical
23:2003 for Particular requirements Resistance
households for appliances for skin or 960 ℃
2
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
IEC 60335-2- machinery for Particular requirements Resistance
–Safety – Part 2-23: to heat and SF-1 N
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
30/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
IEC 60335-2- for Particular requirements Resistance
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
Household and similar 600 V
electrical appliances - Output Current: Max.
Safety - Part 2-24:
Particular requirements 100 A
Frequency: Max. 100
for refrigerating MHz
appliances, ice-cream Temperature: Max.
appliances and ice 300 ℃
Electrical makers
machinery for [Exception] SF-1 N
households Clause 22.108 -
Explosion proof test (IEC 960 ℃
Humidity: Max. 96 %
60079-15) R.H.
Clause 24 - Switch Electric Strength: Max.
durability test 10 kV
Annex CC - Non- Touch Current: Max. 5
sparking "n" electrical mA
apparatus Weight: Max. 150 Kg
Angle: Max. 360 °
31/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
Safety - Part 2-24:
Frequency: Max. 100
IEC 60335-2- Electrical makers Resistance to heat and
24:2010 machinery for [Exception] SF-1 N
+A1:2012 households Clause 22.108 -
Explosion proof test (IEC 960 ℃
Humidity: Max. 96 %
60079-15) R.H.
Annex CC - Non- Touch Current: Max. 5
sparking "n" electrical mA
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
Safety - Part 2-24: 100 A
Particular requirements Frequency: Max. 100
IEC 60335-2- Electrical makers Resistance to heat and
24:2010/AMD2:20 machinery for [Exception] SF-1 N
17 households Clause 22.108 - 960 ℃
Explosion proof test (IEC Humidity: Max. 96 %
60079-15) R.H.
Clause 24 – Switch Electric Strength: Max.
Annex CC – Nonsparking Touch Current: Max. 5
"n" electrical apparatus mA
Weight: Max. 150 Kg
Angle: Max. 360 °
32/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
Electrical
IEC 60335-2- makers Resistance to heat and
households Clause 22.108 - 960 ℃
60079-15) R.H.
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
machinery for water-suction cleaning Resistance
for vacuum cleaners and to heat and
2:2009 SF-1 N
+A1:2012 households appliances 960 ℃
Clause 21 - Mechanical R.H.
strength Electric Strength: Max.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
33/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Electrical
IEC 60335-2- machinery for water-suction cleaning Resistance
for vacuum cleaners and to heat and SF-1 N
households appliances 960 ℃
Clause 21 - Mechanical R.H.
strength Electric Strength: Max.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
Electrical electrical appliances –
machinery for Safety – Part 2-30: SF-1 N
for room heaters Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
34/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
IEC 60335-2- Electrical electrical appliances – Resistance to heat and
30:2009 + machinery for Safety – Part 2-30: SF-1 N
AMD1:2016 households Particular requirements 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical Safety – Part 2-31:
machinery for Particular requirements SF-1 N
households for range hoods and 960 ℃
other cooking fume Humidity: Max. 96 %
extractors R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
35/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
electrical appliances –
IEC 60335-2- 300 ℃
31:2012 + Resistance to heat and
AMD1:2016 + fire Temperature: Max.
households for range hoods and
AMD2:2018 960 ℃
extractors R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
for massage appliances Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
36/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
IEC 60335-2- 300 ℃
households Particular requirements
3 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Particular requirements
IEC 60335-2- 300 ℃
Electrical for motor-compressors
+A1:2004+A2:200 households [Exception]
Annex AA - Running
8 960 ℃
overload tests for Humidity: Max. 96 %
motor-compressors R.H.
classified as tested with Electric Strength: Max.
Annex AA 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
37/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
households Annex AA - Running 960 ℃
Annex AA 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
IEC 60335-2- machinery for Particular requirements Resistance
Safety – Part 2-35: to heat and SF-1 N
households for instantaneous water 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
38/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
machinery for Particular requirements Resistance
Safety – Part 2-35: to heat and
35:2012 + SF-1 N
AMD1:2016 households for instantaneous water 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
35:2012/AMD2:20 machinery for Particular requirements Resistance
20 households for instantaneous water 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
39/433
No. KT393

Safety – Part 2-40:
for electrical heat
pumps, air-conditioners
and dehumidifiers
[Exception]
Clause 22 - Construction
IEC 60335-2- Temperature: Max.
Electrical (Vacuum pressure
40:2002 300 ℃
+A1:2005+A2:200 households apparatus)
Humidity: Max. 96
Annex FF Leak
5 %R.H.
simulation tests
(Test possible products)
- Air
conditioners(package
type, multi type,
portable type, split
type): 18,000 kcal/h
- Dehumidifiers(package
type, split type)

electrical appliances – Supply voltage(AC):
Safety – Part 2-40: Max. 600 V
Particular requirements Output Current: Max.
for electrical heat 100 A
pumps, air-conditioners Frequency: Max. 100
and dehumidifiers MHz
[Exception] Temperature: Max.
Clause 22 - Construction 300 ℃
IEC 60335-2- Electrical (Vacuum pressure Resistance to heat and
40:2002
+A1:2005+A2:200 households apparatus)
machinery for fire Temperature: Max. SF-1 N
Annex FF Leak 960 ℃
5 simulation tests Humidity: Max. 96 %
(Test possible products) R.H.
- Air Electric Strength: Max.
conditioners(package 10 kV
type, multi type, Touch Current: Max.
portable type, split 30 mA
type): 18,000 kcal/h Weight: Max. 150 Kg
- Dehumidifiers(package Angle: Max. 360 °
type, split type)
40/433
No. KT393

for electrical heat
and dehumidifiers
[Exception]
Clause 22 - Construction Temperature: Max.
IEC 60335-2- 300 ℃
machinery for apparatus) SF-2 N
40:2013 Humidity: Max. 96
households Annex FF Leak %R.H.
simulation tests
(Test possible products)
- Air
type, multi type,
type, split type)

Clause 22 - Construction 300 ℃
Electrical (Vacuum pressure Resistance to heat and
IEC 60335-2- machinery for apparatus) fire Temperature: Max. SF-1 N
40:2013 households Annex FF Leak 960 ℃
simulation tests Humidity: Max. 96 %
(Test possible products) R.H.
type, split type)
41/433
No. KT393

for electrical heat
and dehumidifiers
[Exception]
Clause 22 - Temperature: Max.
Electrical Construction(Vacuum
IEC 60335-2- 300 ℃
machinery for pressure apparatus) SF-2 N
40:2022 Humidity: Max. 96
households Annex FF Leak %R.H.
simulation tests (Test
possible products)
- Air
type, multi type,
type, split type)

Clause 22 - 300 ℃
Electrical Construction(Vacuum Resistance to heat and
IEC 60335-2- machinery for pressure apparatus) fire Temperature: Max. SF-1 N
40:2022 households Annex FF Leak 960 ℃
simulation tests (Test Humidity: Max. 96 %
possible products) R.H.
type, split type)
42/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
IEC 60335-2- machinery for Safety – Part 2-43: Resistance to heat and SF-1 N
43:2017 households for clothesrequirements
dryers and 960 ℃
towel rails Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
for spin extractors Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
43/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
for spin extractors Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
Safety - Part 2-58: MHz
Particular requirements Temperature: Max.
for commercial electric 300 ℃
machinery for dishwashing machines Resistance to heat and
58:2002 SF-1 N
[Exception] fire Temperature: Max.
+A1:2008 households Annex BB - Ageing test 960 ℃
for elastomeric parts Humidity: Max. 96 %
Annex CC - R.H.
Requirements to avoid Electric Strength: Max.
backsiphonage 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360
44/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
IEC 60335-2- for commercial electric 300 ℃
Electrical
58:2002 for dishwashing machines Resistance to heat and
households Annex BB - Ageing test
5 960 ℃
Annex CC - R.H.
backsiphonage 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
Electrical
IEC 60335-2- machinery for dishwashing machines Resistance to heat and SF-1 N
58:2017 [Exception] fire Temperature: Max.
households Annex BB - Ageing test 960 ℃
Annex CC - R.H.
backsiphonage 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
45/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
Household and similar MHz
electrical appliances - Temperature: Max.
IEC 60335-2- Safety - Part 2-5: 300 ℃
Electrical
5:2002 for Particular requirements Resistance to heat and
for dishwashers fire Temperature: Max.
households [Exception]
8 960 ℃
Annex BB - Ageing test Humidity: Max. 96 %
for elastomeric parts R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
Safety - Part 2-5: 300 ℃
Electrical
IEC 60335-2- machinery for Particular requirements Resistance to heat and SF-1 N
5:2012 for dishwashers fire Temperature: Max.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °

IEC 60335-2- Ozon: 8x10-5(800
65:2002+A1:2008 households Particular
nmol/mol)
for air-cleaning
appliance
(Clause 32)
46/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
IEC 60335-2- for Safety – Part 2-65: Resistance to heat and
households for air-cleaning 960 ℃
appliance Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °

IEC 60335-2- Electrical Safety – Part 2-65: Ozon: 8x10-5(800
65:2002+A1:2008 machinery for Particular requirements SF-3 N
nmol/mol)
+A2:2015 households for air-cleaning
appliance
(Clause 32)
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
65:2002+A1:2008 machinery for Safety – Part 2-65: Resistance to heat and SF-1 N
+A2:2015 households for air-cleaning 960 ℃
appliances Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
47/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
IEC 60335-2- Electrical Safety - Part 2-6:
machinery for Particular requirements Resistance to heat and
6:2002 + SF-1 N
AMD1:2004 households for stationary cooking 960 ℃
ranges, hobs, ovens and Humidity: Max. 96 %
similar appliances R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
IEC 60335-2- Electrical Safety - Part 2-6:
machinery for Particular requirements Resistance to heat and
6:2014 + SF-1 N
AMD1:2018 households for stationary cooking 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
48/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
IEC 60335-2- Particular requirements 300 ℃
Electrical
75:2002 for for commercial Resistance to heat and
households and vendingappliances
dispensing fire Temperature: Max.
8 machines 960 ℃
Annex AA - Aging test R.H.
for elastomeric parts Electric Strength: Max.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Electrical
IEC 60335-2- machinery for for commercial Resistance to heat and SF-1 N
75:2012 households and vendingappliances
machines 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
49/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
Household and similar Output Current: Max.
electrical appliances - 100 A
Safety - Part 2-7: Frequency: Max. 100
Particular requirements MHz
for washing machines Temperature: Max.
[Exception] 300 ℃
Electrical
IEC 60335-2- machinery for Clause 32 - Radiation, Resistance to heat and SF-1 N
7:2008 households hazardsand similar
toxicity fire Temperature: Max.
960 ℃
Annex CC - Detergent Electric Strength: Max.
free electrolyser 10 kV
washing machines Touch Current: Max. 5
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
machinery for Clause 32 - Radiation, Resistance to heat and
7:2008 SF-1 N
households hazardsand similar
toxicity fire Temperature: Max.
+A1:2011 960 ℃
free electrolyser 10 kV
washing machines Touch Current: Max. 5
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
50/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
Electrical
IEC 60335-2- Clause 32 – Radiation, Resistance to heat and
machinery for toxicity and similar SF-1 N
7:2008+A2:2016 fire Temperature: Max.
households hazards 960 ℃
Annex BB - Ageing test Humidity: Max. 96
for elastomeric parts %R.H.
free electrolyser washing 10 kV
machines Touch Current: Max. 5
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
Electrical
IEC 60335-2- Clause 32 – Radiation, Resistance to heat and
households hazards 960 ℃
Annex BB - Ageing test Humidity: Max. 96
for elastomeric parts %R.H.
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
51/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
IEC 60335-2- 300 ℃
households Particular requirements
8 960 ℃
for fans Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
for toilet appliances Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
52/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
for toilet appliances Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Household and similar Max. 300 V or Max.
electrical appliances - 600 V
Safety - Part 2-89: Output Current: Max.
for commercial Frequency: Max. 100
refrigerating appliances MHz
with an incorporated or Temperature: Max.
remote refrigerant unit 300 ℃
Electrical
IEC 60335-2- machinery for or compressor Resistance to heat and SF-1 N
89:2010 [Exception] fire Temperature: Max.
60079-15) R.H.
Annex BB - Non- Touch Current: Max. 5
sparking “n” electrical mA
Angle: Max. 360 °
53/433
No. KT393

Supply voltage(AC):
IEC 60335-2- remote refrigerant unit 300 ℃
Electrical
89:2010 for or compressor Resistance to heat and
households Clause 22.107 -
5 960 ℃
60079-15) R.H.
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
machinery for for shavers, hair clippers Resistance
Particular requirements to heat and
8:2012 SF-1 N
+A1:2015 households and similar appliances 960 ℃
24 Components R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
54/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
IEC 60335-2- Electrical for drives for rolling Resistance to heat and
97:2002 machinery for shutters, awnings, SF-1 N
+A1:2004 households blinds and similar 960 ℃
equipment Humidity: Max. 96 %
[Exception] R.H.
5.101 apparatus Electric Strength: Max.
described in Figure 102 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
IEC 60335-2- 300 ℃
Electrical for drives for rolling
+A1:2004+A2:200 households shutters,
machinery for awnings, SF-1 N
blinds and similar
8 960 ℃
[Exception] R.H.
5.101 apparatus Electric Strength: Max.
described in Figure 102 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
55/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.300
Household and similar ℃
IEC 60335-2- Electrical electrical appliances – Resistance to heat and
98:2002/ machinery for Safety Part 2-98: SF-1 N
AMD2:2008 households Particular requirements 960 ℃
for humidifiers Humidity: Max. 96
%R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
households for grills, toasters and 960 ℃
similar portable cooking Humidity: Max. 96 %
appliances R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
56/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
appliances R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Uninterruptible power
systems (UPS) - Part 1:
General and safety
requirements for UPS
[Exception]
Cl. 5.1.4 Backfeed
protection
(Measurement of
transient levels,
Abrasion resistance test)
Cl. 5.3.2: Protective
earthing (Measurement Supply voltage: Max.
of transient levels, 600 V
Abrasion resistance test) Temperature: Max.
Electrical
IEC 62040-1:2008 machinery for Cl. 6.2.1: General 200 °C SF-1 N
households connectionfor
provisions Electric Strength: Max.
to power 3 kV
(AC Power Supply Touch Current: Max.
Cords) 3.5 mA
Cl. 7.3: Mechanical
strength (Cathode ray
tube)
Annex I.4: Load-induced
change of reference
potential
Annex I.5: Solid-state
backfeed protection
Annex M.4: Ventilation
of battery
compartments
57/433
No. KT393

General and safety
[Exception]
Cl. 5.1.4 Backfeed
protection
(Measurement of
transient levels,
Electrical
IEC 62040- machinery for Cl. 6.2.1: General 200 °C SF-1 N
1:2008+A1:2013 households connectionfor
to power 3 kV
Cords) 3.5 mA
Cl. 7.3: Mechanical
tube)
change of reference
potential
backfeed protection
of battery
compartments
Audio/video,
information Water: (1 ~ 8) level
and communication
IEC 62368-1:2014 machinery for technology equipment – 600 V SF-3 N
Part 1: Safety
200 °C
(Annex F.3.7)
(Annex M)
58/433
No. KT393

Audio/video,
information and
communication
technology equipment –
Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
which conductive
metallic parts are
test B 50 of ISO 306)
Cl. 5.4.2, 5.4.3 and
5.4.4: Clearances,
Mandrel test)
Cl. 5.6.4.1:
device and circuit
(Annex R)
LED, X-Ray, UV)
Annex G.7: Mains Supply voltage: Max.
supply cords (Test 600 V
equipment according Temperature: Max.
Electrical
IEC 62368-1:2014 machinery for IEC 60227) 200 °C SF-1 N
households limitersG.9: IC current
Annex Electric Strength: Max.
3 kV
Annex G.10: Test for Touch Current: Max.
resistor serving as 10 mA
Table D.1)
Annex G.13.6.2:
compatibility test)
Annex J: Insulated
without interleaved
insulation
from external spark
sources (Spark
Test)Annex S.3:
Flammability tests for
the bottom of a fire
enclosure
Annex U: Mechanical
59/433
No. KT393

Audio/video,
information and
communication
Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
which conductive
metallic parts are
Cl. 5.4.2, 5.4.3, 5.4.4
and Annex X:
28), metal foil,
loads, Stop watch,
weight)
Cl. 5.6.4.1:
device and circuit Supply voltage: Max.
(Annex R) 600 V
Cl. 10: Radiations (Laser Temperature: Max.
Electrical
IEC 62368-1:2018 machinery for (including laser diodes), 200 °C SF-1 N
Light emitting diodes Electric Strength: Max.
households (LEDs), Image Projector, 3 kV
X-ray, Effect of UV Touch Current: Max.
radiation on materials 10 mA
(Annex C), Human
exposure to UV
FIW
Annex G.7: Mains
supply cords (Test
equipment according
IEC 60227)
limiters
Annex G.13.6.2:
Annex J: Insulated
without interleaved
insulation
Annex M.7:
Concentration of
hydrogen gas
60/433
No. KT393

from
(Spark Test)
Annex S: Tests for
described in annex
S.3.2)
securing parts
circuit test
Annex U: Mechanical
Annex Y.2(Annex C):
Ultraviolet light
conditioning test
to corrosion, water
borne contaminants
Annex Y.3.3: Water-
tests
Annex Y.4.4:
Compression test
Annex Y.4.5: Oil
resistance
Audio/video,
information and
IEC 62368-1:2018 machinery for –Part 1: Safety 600 V SF-3 N
requirements
200 °C
(Annex M)
(Annex Y3.2)
(Annex Y.5)
61/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
Electrical electrical appliances - Resistance to heat and
K 10007:2008-11 machinery for Safety - Particular SF-1 N
households requirements for electric fire Temperature: Max.
960 ℃
water purifiers Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
Electrical electrical appliances - Resistance to heat and
K 10008:2011-12 machinery for Safety - Particular fire Temperature: Max. SF-1 N
households requirements for electric 960 ℃
water ionizers Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
62/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
machinery for requirements for electric Resistance
Safety - Particular to heat and
K 10012:2013-12 SF-1 N
households fitness equipment and 960 ℃
similar equipment Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V
100 A
Safety - Particular
requirements for warm Temperature: Max.
300 ℃
water mats and electric Resistance to heat and
Electrical
machinery for boiler for beds
K 10019:2009-12 fire Temperature: Max. SF-1 N
[Exception]
households Cl. 22: Construction 960 ℃
Humidity: Max. 96 %
Clause 25 - Supply
connection and external R.H.
flexible cords (Cord reel Electric Strength: Max.
10 kV
durability test) Touch Current: Max. 5
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
63/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
K 60335-2- machinery for Particular requirements Resistance to heat and SF-1 N
9:2013-12 fire Temperature: Max.
appliances R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
General and safety
[Exception]
Cl. 5.1.4: Backfeed
protection
(Measurement of
transient levels,
Electrical
K 62040-1:2011- machinery for Cl. 6.2.1: General 200 °C SF-1 N
12 households connectionfor
to power 3 kV
Cords) 3.5 mA
Cl. 7.3: Mechanical
tube)
change of reference
potential
backfeed protection
of battery
compartments
64/433
No. KT393

Supply voltage(AC):
Max. 300 V
100 A
Frequency: Max. 100
MHz
Safety - Particular
Electrical for electric Resistance to heat and
K 70000:2008-12 machinery for requirements fire Temperature: Max. SF-1 N
households sterilizers and similar 960 ℃
[Exception] R.H.
Cl. 24: Component Electric Strength: Max.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V
100 A
Safety – Particular
requirements for warm Temperature: Max.
300 ℃
water mats and warm
Electrical Resistance to heat and
KC 10018:2021- machinery for water beds fire Temperature: Max. SF-1 N
Humidity: Max. 96 %
Clause 21.102 –
Mattress durability test R.H.
Annex AA: Details on
the heat insulating sheet 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
KC 60335-1:2022- machinery for Clause
Electrical 22.32 – Rubber Resistance to heat and
aging test SF-1 N
02 fire Temperature: Max.
Annex J – Coated R.H.
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
65/433
No. KT393

KC 60335-1:2022- machinery for electrical
Electrical appliances -
Safety - Part 1: General Water: (1 ~ 8) level SF-3 N
02 households requirements
(Clause 15.1, 15.1.1)

KC 60335-1:2022- machinery for electrical
Electrical appliances -
Safety - Part 1: General Water: (1 ~ 8) level SF-3 N
06 households requirements
(Clause 15.1, 15.1.1)
Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
KC 60335-1:2022- machinery for Clause
Electrical 22.32 – Rubber Resistance to heat and
aging test SF-1 N
06 fire Temperature: Max.
Annex J – Coated R.H.
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
KC 60335-2- Resistance to heat and
11:2021-02 fire Temperature:
households Particular requirements Max. 960 ℃
for tumble dryers Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
66/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
households for deep fat fryers, 960 ℃
frying pans and similar Humidity: Max. 96 %
appliances R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical Safety - Part 2-14:
households for kitchen machines 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
67/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Electrical
KC 60335-2- machinery for for appliances for Resistance to heat and SF-1 N
15:2022-02 heating liquids fire Temperature: Max.
households [exception] 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
16:2015-09 households Particular requirements fire Temperature: Max.
960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
68/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
KC 60335-2- machinery for Safety - Part 2-21: Resistance to heat and SF-1 N
21:2022-02 households for storagerequirements
water 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
KC 60335-2- machinery for Particular requirements Resistance
–Safety – Part 2-23: to heat and SF-1 N
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
69/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
Electrical
KC 60335-2- makers Resistance to heat and
60079-15) R.H.
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
for vacuum cleaners and 300 ℃
Electrical
KC 60335-2- machinery for water-suction cleaning Resistance to heat and SF-1 N
2:2015-09 appliances fire Temperature: Max.
Clause 21 - Mechanical Humidity: Max. 96 %
strength R.H.
Clause 33 - Product Electric Strength: Max.
performance 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
70/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
households for range hoods and 960 ℃
extractors R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
71/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
households Annex AA - Running 960 ℃
Annex AA 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
72/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
KC 60335-2- machinery for Particular requirements Resistance
households for instantaneous water 960 ℃
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °

for electrical heat
and dehumidifiers
[Exception]
Clause 22 – Construction Temperature: Max.
KC 60335-2- 300 ℃
40:2022-06 Humidity: Max. 96 %
households Annex FF: Leak R.H.
simulation tests
(Available test items)
- Air
conditioners(Package
type, Multitype, Portable
type, Split type): Max.
18,000 kcal/h
- Dehumidifiers(Package
type, Split type))
73/433
No. KT393

Household and similar Supply voltage(AC):
electrical appliances – Max. 300 V or Max.
Safety – Part 2-40: 600 V
Clause 22 – Construction 300 ℃
households Annex FF: Leak 960 ℃
simulation tests Humidity: Max. 96 %
(Available test items) R.H.
conditioners(Package 10 kV
type, Multitype, Portable Touch Current: Max. 5
type, Split type): Max. mA
18,000 kcal/h Weight: Max. 150 Kg
- Dehumidifiers(Package Angle: Max. 360 °
type, Split type)
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
KC 60335-2- machinery for Safety – Part 2-43: Resistance to heat and SF-1 N
43:2022-02 households for clothesrequirements
dryers and 960 ℃
towel rails Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
74/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
for spin extractors 300 ℃
Electrical
KC 60335-2- [Exception] Resistance to heat and
machinery for Clause 33 - Product SF-1 N
households performance 960 ℃
Annex BB - Methods for Humidity: Max. 96 %
measuring the R.H.
performance of Electric Strength: Max.
electrical spin extractors 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
Electrical
KC 60335-2- machinery for dishwashing machines Resistance to heat and SF-1 N
58:2022-02 [Exception] fire Temperature: Max.
households Annex BB - Ageing test 960 ℃
Annex CC - R.H.
backsiphonage 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
75/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
for dishwashers Temperature: Max.
[Exception] 300 ℃
Electrical
KC 60335-2- Annex BB - Ageing test Resistance to heat and
machinery for for elastomeric parts SF-1 N
households Annex CC - 960 ℃
Performance criteria and Humidity: Max. 96 %
methods for measuring R.H.
the performance of Electric Strength: Max.
electrical vegetable 10 kV
washer Touch Current: Max. 5
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Electrical
KC 60335-2- machinery for Safety – Part 2-65: Resistance to heat and SF-1 N
65:2022-06 Particular requirements fire Temperature: Max.
households for air-cleaning 960 ℃
appliances Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °

Electrical
KC 60335-2- machinery for Safety – Part 2-65: Ozon: 8x10-5(800 SF-3 N
65:2022-06 Particular requirements nmol/mol)
households for air-cleaning
appliances (Clause 32)
76/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
electrical appliances – Temperature: Max.
Safety - Part 2- 300 ℃
Electrical
KC 60335-2- 6:Particular Resistance to heat and
households for stationary cooking 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Electrical
KC 60335-2- machinery for for commercial Resistance to heat and SF-1 N
75:2015-09 households and vendingappliances
machines 960 ℃
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
77/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
[Exception] 300 ℃
Electrical
KC 60335-2- Clause 32 – Radiation, Resistance to heat and
7:2021-02 fire Temperature:
households hazards Max. 960 ℃
mA
Weight: Max. 150 Kg
Angle: Max. 360 °

KC 60335-2- machinery for Safety - Part 2-80: Water: (1 ~ 8) level SF-3 N
80:2022-01 households Particular requirements
for fans
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.
for fans Humidity: Max. 96 %
R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 480 V
KC 60335-2- 850 °C
84:2016-02 Electric Stength: Max.
households Particular requirements 3 kV
for toilet appliances Touch Current: Max. 5
mA
78/433
No. KT393

Supply voltage(AC):
remote refrigerant unit 300 ℃
Electrical
KC 60335-2- machinery for or compressor Resistance to heat and SF-1 N
89:2015-07 [Exception] fire Temperature: Max.
60079-15) R.H.
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
Electrical
KC 60335-2- machinery for for shavers, hair clippers Resistance
Particular requirements to heat and SF-1 N
households and similar appliances 960 ℃
Cl. 24: Component R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
79/433
No. KT393

Supply voltage(AC):
Max. 300 V or Max.
600 V
for drives for rolling 300 ℃
Electrical
KC 60335-2- machinery for shutters, awnings, Resistance to heat and SF-1 N
97:2015-09 households equipmentsimilar
blinds and fire Temperature: Max.
960 ℃
Cl. 5.101: Test R.H.
apparatus according to Electric Strength: Max.
Figure 102 10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Supply voltage(AC):
Max. 300 V or Max.
600 V
100 A
Frequency: Max. 100
MHz
Temperature: Max.300
Household and similar ℃
machinery for Safety Part 2-98: SF-1 N
for humidifiers Humidity: Max. 96
%R.H.
10 kV
mA
Weight: Max. 150 Kg
Angle: Max. 360 °
Audio/video,
information and
KC 62368-1:2021- machinery for –Part 1: Safety 600 V SF-3 N
08 requirements
200 °C
(Annex M)
(Annex Y3.2)
(Annex Y.5)
80/433
No. KT393

Audio/video,
information and
communication
Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
which conductive
metallic parts are
Cl. 5.4.2, 5.4.3, 5.4.4
and Annex X:
28), metal foil,
loads, Stop watch,
weight)
Cl. 5.6.4.1:
device and circuit Supply voltage: Max.
(Annex R) 600 V
Cl. 10: Radiations (Laser Temperature: Max.
Electrical
KC 62368-1:2021- machinery (including laser diodes), 200 °C
for SF-1 N
08 households Light emitting diodes Electric Strength: Max.
(LEDs), Image Projector, 3 kV
X-ray, Effect of UV Touch Current: Max.
radiation on materials 10 mA
(Annex C), Human
exposure to UV
FIW
Annex G.7: Mains
supply cords (Test
equipment according
IEC 60227)
limiters
Annex G.13.6.2:
Annex J: Insulated
without interleaved
insulation
Annex M.7:
Concentration of
hydrogen gas
81/433
No. KT393

from
(Spark Test)
Annex S.3: Tests for
described in annex
S.3.2)
securing parts
circuit test
Annex U: Mechanical
Annex Y.2(Annex C):
Ultraviolet light
conditioning test
to corrosion, water
borne contaminants
Annex Y.3.3: Water-
tests
Annex Y.4.4:
Compression test
Annex Y.4.5: Oil
resistance
Audio/video,
information and
UL 62368-1 Third machinery for –Part 1: Safety 600 V SF-3 N
Edition requirements
200 °C
(Annex M)
(Annex Y3.2)
(Annex Y.5)
82/433
No. KT393

Audio/video,
information and
communication
–Part 1: Safety
requirements
[Exception]
Cl. 5.4.1.10:
which conductive
metallic parts are
test B 50 of
ISO 306)
Cl. 5.4.2, 5.4.3, 5.4.4
and Annex X:
28), metal foil,
loads, Stop watch,
weight)
Cl. 5.6.4.1:
Electrical
UL 62368-1 Third machinery for Cl. 10: Radiations (Laser 200 °C SF-1 N
Edition (including laser diodes), Electric Strength: Max.
households Light emitting diodes 3 kV
(Annex C), Human
exposure to UV
FIW
Annex G.7: Mains
supply
limiters
Annex G.13.6.2:
Annex J: Insulated
winding
Annex M.7:
Concentration of
hydrogen gas
83/433
No. KT393

from
(Spark Test)
Annex S: Tests for
described in annex
S.3.2)
securing parts
circuit test
Annex U: Mechanical
Annex Y.2(Annex C):
Ultraviolet light
conditioning test
to corrosion, water
borne contaminants
Annex Y.3.3: Water-
tests
Annex Y.4.4:
Compression test
Annex Y.4.5: Oil
resistance
84/433
No. KT393

03.008 Wired/wireless communication devices

Standard for Limiting SAR: 6 GHz – 7.125
Exposure to
ARPANSA RPS S-1 Wired/wireless GHz
communicatio Radiofrequency Fields – PD: 6 GHz – 18 GHz, BS N
(2021-02) 100 kHz to 300 GHz
n devices 26.5 GHz – 40 GHz,
Radiation Protection 50 GHz – 75 GHz
Series S-1 (Rev.1)
SAR: 6 GHz – 7.125

Maximum Exposure
Wired/wireless GHz
ARPANSA RPS3 Levels to
communicatio PD: 6 GHz – 18 GHz, BS N
(2016-05) Radiofrequency Fields —
3 kHz to 300 GHz 50 GHz – 75 GHz
Radiofrequency fields SAR: 300 MHz – 7.125

Wired/wireless Part 2: Principles and GHz
AS/NZS methods of
communicatio measurement PD: 6 GHz – 18 GHz, BS N
2772.2:2016 and
computation—3 kHz to 50 GHz – 75 GHz
300 GHz
Radiofrequency fields SAR: 300 MHz – 7.125

Wired/wireless Part 2: Principles and
AS/NZS GHz
methods of
2772.2:2016 Amd communicatio measurement PD: 6 GHz – 18 GHz, BS N
and
1:2018 n devices 26.5 GHz – 40 GHz,
computation—3 kHz to 50 GHz – 75 GHz
300 GHz
Radio equipment and

Wired/wireless systems - Short range
AS/NZS communicatio devices - Limits and 9 kHz ∼ 40 GHz SF-3 N
4268:2012 n devices methods of
measurement
Radio equipment and

measurement
Radio equipment and

measurement
Radio equipment and

AS/NZS communicatio devices - Limits and 9 kHz ∼ 40 GHz BS N
measurement
85/433
No. KT393

Radio equipment and
AS/NZS communicatio devices - Limits and 9 kHz ∼ 40 GHz BS N
measurement
Radio equipment and

measurement
Radio equipment and

measurement
Radio equipment and

measurement
Technical characteristics
and test conditions for
Wired/wireless data transmission
AS/NZS equipment operating in 9 kHz ∼ 40 GHz
communicatio the 900 MHz, BS N
4771:2000 2.4 GHz
n devices and 5.8 GHz bands and
using spread spectrum
modulation techniques
communicatio the 900 MHz, SF-1 N
4771:2000 2.4 GHz
4771:2000 2.4 GHz
4771:2000 2.4 GHz
86/433
No. KT393

Wired/wireless Mirrorlink Connectivity
CCC-TS-009 : communicatio Test Specification CCC-TS-009 : 2016 SF-2 N
2016 n devices
Wired/wireless Mirrorlink VNC based

CCC-TS-011 : communicatio Display and Control Test CCC-TS-011 : 2016 SF-2 N
2016 n devices Specification
Wired/wireless Mirrorlink Audio Test

CCC-TS-013 : communicatio Specification CCC-TS-013 : 2015 SF-2 N
2015 n devices
Wired/wireless Mirrorlink Device

CCC-TS-015 : communicatio Attestation Protocol Test CCC-TS-015 : 2015 SF-2 N
Wired/wireless Mirrorlink Common

CCC-TS-017 : communicatio Data Bus Test CCC-TS-017 : 2013 SF-2 N
Wired/wireless Mirrorlink Service Binary

CCC-TS-019 : communicatio Protocol Test CCC-TS-019 : 2016 SF-2 N
Wired/wireless Mirrorlink GPS Data

CCC-TS-021 : communicatio Service Test CCC-TS-021 : 2016 SF-2 N
Wired/wireless Mirrorlink Location Test

2016 n devices
Mirrorlink UPnP
Wired/wireless
CCC-TS-025 : Application Server
communicatio CCC-TS-025 : 2016 SF-2 N
2016 Service Test
n devices Specification
Wired/wireless Mirrorlink UPnP Client

CCC-TS-027 : communicatio Profile Service Test CCC-TS-027 : 2016 SF-2 N
Mirrorlink UPnP
Wired/wireless
CCC-TS-029 : Notification Server
2014 Service Test
Wired/wireless Mirrorlink UPnP Server

CCC-TS-031 : communicatio Device Test Specification CCC-TS-031 : 2016 SF-2 N
2016 n devices
Wired/wireless MirrorLink IOP Test

2016 n devices
Wired/wireless Mirrorlink Application

CCC-TS-037 : communicatio Certification Handling CCC-TS-037 : 2015 SF-2 N
2015 n devices Test Specification
87/433
No. KT393

Wired/wireless Mirrorlink Common API
CCC-TS-039 : communicatio Test Specification CCC-TS-039 : 2015 SF-2 N
2015 n devices
Mirrorlink Application
Wired/wireless
CCC-TS-045 : Developer Certificate
2016 Handling Test
Electromagnetic
compatibility and Radio
spectrum Matters
(ERM); Short Range
Devices (SRD); Radio
Wired/wireless equipment to be used in
EN 300 220-1 communicatio the 25 MHz to 1 000 9 kHz ∼ 6 GHz BS N
V2.4.1 (2012-05) n devices MHz frequency range
with power levels
ranging up to 500 mW;
Part 1: Technical
characteristics and test
methods
Electromagnetic
spectrum Matters
(ERM); Short Range
EN 300 220-1 communicatio the 25 MHz to 1 000 9 kHz ∼ 6 GHz SF-1 N
with power levels
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short Range
with power levels
Part 1: Technical
methods
88/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Short Range
with power levels
Part 1: Technical
methods
Short Range Devices

(SRD) operating in the
Wired/wireless frequency range 25
EN 300 220-1 MHz to 1 000 MHz;
V3.1.1 communicatio Part 1: Technical 9 kHz ∼ 6 GHz SF-3 N
(2017-02) n devices characteristics and
methods of
measurement
Short Range Devices

EN 300 220-1 MHz to 1 000 MHz;
methods of
measurement
Short Range Devices

EN 300 220-1 MHz to 1 000 MHz;
methods of
measurement
Short Range Devices

EN 300 220-1 MHz to 1 000 MHz;
V3.1.1 communicatio Part 1: Technical 9 kHz ∼ 6 GHz BS N
methods of
measurement
89/433
No. KT393

Electromagnetic
spectrum Matters
(ERM);Short Range
Devices (SRD);Radio
equipment to be
Wired/wireless used in the 25 MHz to 1
EN 300 220-2 communicatio 000 MHz frequency 9 kHz to 6 GHz SF-3 N
V2.4.1 (2012-05) n devices range with power levels
Part 2: Harmonized EN
covering essential
requirements under
article 3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
(ERM);Short Range
Devices (SRD);Radio
equipment to be
covering essential
requirements under
Directive
Electromagnetic
spectrum Matters
(ERM);Short Range
Devices (SRD);Radio
equipment to be
covering essential
requirements under
Directive
90/433
No. KT393

Electromagnetic
spectrum Matters
(ERM);Short Range
Devices (SRD);Radio
equipment to be
EN 300 220-2 communicatio 000 MHz frequency 9 kHz to 6 GHz BS N
covering essential
requirements under
Directive
Short Range Devices

frequency range 25
Wired/wireless MHz to 1 000 MHz;
EN 300 220-2 Part 2: Harmonised
V3.1.1 communicatio Standard 9 kHz ∼ 6 GHz BS N
covering the
(2017-02) n devices essential requirements
of article 3.2 of Directive
2014/53/EU for non
specific radio equipment
Short Range Devices

frequency range 25
V3.1.1 communicatio Standard 9 kHz ∼ 6 GHz SF-1 N
covering the
2014/53/EU for non
Short Range Devices

frequency range 25
covering the
2014/53/EU for non
Short Range Devices

frequency range 25
covering the
2014/53/EU for non
91/433
No. KT393

Short Range Devices
(SRD) operating
Wired/wireless in the frequency range
EN 300 220-2
communicatio PartMHz
25 to 1 000 MHz; 9 kHz ∼ 6 GHz
V3.2.1 SF-2 N
2: Harmonised
(2018-06) n devices Standard for access to
radio spectrum for non
Short Range Devices

(SRD) operating
EN 300 220-2
25 to 1 000 MHz; 9 kHz ∼ 6 GHz
V3.2.1 SF-3 N
2: Harmonised
Short Range Devices

(SRD) operating
EN 300 220-2
25 to 1 000 MHz; 9 kHz ∼ 6 GHz
V3.2.1 BS N
2: Harmonised
Short Range Devices

(SRD) operating
EN 300 220-2
25 to 1 000 MHz; 9 kHz ∼ 6 GHz
V3.2.1 SF-1 N
2: Harmonised
Electromagnetic
spectrum Matters
(ERM); Wideband
Transmission systems;
Data transmission
EN 300 328 V1.7.1 communicatio equipment
Wired/wireless operating in
the 2,4GHz ISM band 30 MHz ∼ 12.75 GHz SF-3 N
(2006-10) n devices and using spread
spectrum modulation
techniques; Harmonized
EN covering essential
requirements under
Directive.
92/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
spectrum modulation
requirements under
Directive.
Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
spectrum modulation
requirements under
Directive.
Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
the 2,4GHz ISM band 30 MHz ∼ 12.75 GHz BS N
spectrum modulation
requirements under
Directive.
93/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
spectrum modulation
requirements under
Directive.
Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
spectrum modulation
requirements under
Directive.
Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
the 2,4GHz ISM band 30 MHz ∼ 12.75 GHz BS N
spectrum modulation
requirements under
Directive.
94/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
spectrum modulation
requirements under
Directive.
Electromagnetic
spectrum Matters
(ERM); Wideband
transmission systems;
Data transmission
the 2,4 GHz ISM band 30 MHz ∼ 12.75 GHz SF-3 N
(2015-02) n devices and using wide band
modulation techniques;
Harmonized EN covering
the essential
requirements of article
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
the essential
3.2 of the R&TTE
Directive
95/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
the essential
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
(ERM); Wideband
Data transmission
the 2,4 GHz ISM band 30 MHz ∼ 12.75 GHz BS N
the essential
3.2 of the R&TTE
Directive
Wideband transmission
systems; Data
transmission equipment
operating in the
2,4 GHz ISM band and
EN 300 328 V2.1.1 communicatio using
Wired/wireless wide band
modulation techniques; 30 MHz ~ 12.75 GHz BS N
(2016-11) n devices Harmonised
Standard covering the
essential
3.2 of Directive
2014/53/EU
systems; Data
operating in the
modulation techniques; 30 MHz ~ 12.75 GHz SF-2 N
essential
3.2 of Directive
2014/53/EU
96/433
No. KT393

systems; Data
operating in the
essential
3.2 of Directive
2014/53/EU
systems; Data
operating in the
essential
3.2 of Directive
2014/53/EU
systems;
Data transmission
EN 300 328 V2.2.2 Wired/wireless
communicatio equipment operating in 30 MHz ∼ 12.75 GHz BS N
(2019-07) the 2,4 GHz band;
n devices Harmonised Standard
for access to radio
spectrum
systems;
Data transmission
communicatio equipment operating in 30 MHz ∼ 12.75 GHz SF-1 N
(2019-07) the 2,4 GHz band;
for access to radio
spectrum
systems;
Data transmission
(2019-07) the 2,4 GHz band;
for access to radio
spectrum
97/433
No. KT393

systems;
Data transmission
(2019-07) the 2,4 GHz band;
for access to radio
spectrum
Short Range Devices

(SRD); Radio equipment
in the frequency range 9
kHz to 25 MHz and
inductive loop systems
communicatio in the frequency range 9 9 kHz ∼ 1 GHz BS N
(2017-02) kHz to 30 MHz;
covering the essential
3.2 of Directive
2014/53/EU
Short Range Devices

kHz to 25 MHz and
communicatio in the frequency range 9 9 kHz ∼ 1 GHz SF-2 N
(2017-02) kHz to 30 MHz;
3.2 of Directive
2014/53/EU
Short Range Devices

kHz to 25 MHz and
(2017-02) kHz to 30 MHz;
3.2 of Directive
2014/53/EU
Short Range Devices

kHz to 25 MHz and
(2017-02) kHz to 30 MHz;
3.2 of Directive
2014/53/EU
98/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Short Range
Wired/wireless equipment in the
EN 300 330-1 frequency range 9 kHz 9 kHz ∼ 1 GHz
V1.8.1 communicatio to 25 MHz and inductive BS N
(2015-03) n devices loop systems in the
frequency range 9 kHz
to 30 MHz;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short Range
V1.8.1 communicatio to 25 MHz and inductive SF-1 N
to 30 MHz;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short Range
to 30 MHz;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short Range
to 30 MHz;
Part 1: Technical
methods
99/433
No. KT393

Electromagnetic
spectrum Matters
(ERM);Short Range
Devices (SRD);Radio
equipment in the
Wired/wireless frequency range 9 kHz
EN 300 330-2 to 25 MHz and inductive 9 kHz ∼ 1 GHz
communicatio loop systems BS N
V1.6.1 (2015-03) in the
n devices frequency range 9 kHz
to 30 MHz;
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
(ERM);Short Range
Devices (SRD);Radio
equipment in the
communicatio loop systems SF-1 N
V1.6.1 (2015-03) in the
to 30 MHz;
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
(ERM);Short Range
Devices (SRD);Radio
equipment in the
V1.6.1 (2015-03) in the
to 30 MHz;
3.2 of the R&TTE
Directive
100/433
No. KT393

Electromagnetic
spectrum Matters
(ERM);Short Range
Devices (SRD);Radio
equipment in the
V1.6.1 (2015-03) in the
to 30 MHz;
3.2 of the R&TTE
Directive
Short Range Devices

to be used in the 1 GHz
to 40 GHz frequency
communicatio range; 30 MHz ~ 40 GHz SF-3 N
(2017-03) Harmonised Standard
n devices covering the essential
3.2 of Directive
2014/53/EU
Short Range Devices

to 40 GHz frequency
3.2 of Directive
2014/53/EU
Short Range Devices

to 40 GHz frequency
3.2 of Directive
2014/53/EU
Short Range Devices

to 40 GHz frequency
communicatio range; 30 MHz ~ 40 GHz BS N
3.2 of Directive
2014/53/EU
101/433
No. KT393

Short Range Devices
(SRD);Radio equipment
Wired/wireless to be used in the 1 GHz
EN 300 440 communicatio to 40 GHz frequency 30 MHz ~ 40 GHz SF-2 N
V2.2.1(2018-07) n devices range; Harmonised
Standard for access to
radio spectrum
Short Range Devices

radio spectrum
Short Range Devices

EN 300 440 communicatio to 40 GHz frequency 30 MHz ~ 40 GHz BS N
radio spectrum
Short Range Devices

radio spectrum
Electromagnetic
spectrum Matters
(ERM); Short range
Wired/wireless devices; Radio
EN 300 440-1 communicatio equipment to be used in 30 MHz ∼ 40 GHz SF-2 N
V1.6.1 (2010-08) n devices the 1 GHz to 40 GHz
frequency range;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short range
frequency range;
Part 1: Technical
methods
102/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Short range
EN 300 440-1 communicatio equipment to be used in 30 MHz ∼ 40 GHz BS N
frequency range;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short range
frequency range;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short range
devices; Radio
EN 300 440-2 communicatio the 1 GHz to 40 GHz 30 MHz ∼ 40 GHz SF-3 N
V1.4.1 (2010-08) n devices frequency range; Part 2:
the essential
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
(ERM); Short range
devices; Radio
the essential
3.2 of the R&TTE
Directive
103/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Short range
devices; Radio
the essential
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
(ERM); Short range
devices; Radio
EN 300 440-2 communicatio the 1 GHz to 40 GHz 30 MHz ∼ 40 GHz BS N
the essential
3.2 of the R&TTE
Directive
Short Range Devices;

Transport and Traffic
Telematics (TTT);
Radar equipment
operating in the 76 GHz
Wired/wireless to 77 GHz range;
EN 301 091-1 communicatio Harmonised Standard 30 MHz ∼ 154 GHz SF-3 N
V2.1.1 (2017-01) n devices covering the essential
3.2 of Directive
2014/53/EU;
Part 1: Ground based
vehicular radar

Telematics (TTT);
Radar equipment
3.2 of Directive
2014/53/EU;
vehicular radar
104/433
No. KT393

Telematics (TTT);
Radar equipment
3.2 of Directive
2014/53/EU;
vehicular radar

Telematics (TTT);
Radar equipment
EN 301 091-1 communicatio Harmonised Standard 30 MHz ∼ 154 GHz BS N
3.2 of Directive
2014/53/EU;
vehicular radar

Telematics (TTT);
Radar equipment
EN 301 091-2 communicatio covering the Standard
Harmonised 30 MHz ∼ 154 GHz SF-3 N
V2.1.1 (2017-01) essential
n devices requirements of article
3.2 of Directive
2014/53/EU;
Part 2: Fixed
infrastructure radar
equipment

Telematics (TTT);
Radar equipment
V2.1.1 (2017-01) essential
3.2 of Directive
2014/53/EU;
Part 2: Fixed
equipment
105/433
No. KT393

Telematics (TTT);
Radar equipment
V2.1.1 (2017-01) essential
3.2 of Directive
2014/53/EU;
Part 2: Fixed
equipment

Telematics (TTT);
Radar equipment
Harmonised 30 MHz ∼ 154 GHz BS N
V2.1.1 (2017-01) essential
3.2 of Directive
2014/53/EU;
Part 2: Fixed
equipment
Electromagnetic
spectrum Matters
Wired/wireless (ERM); Cordless audio
EN 301 357-1 communicatio devices in the range 25 9 kHz ∼ 10 GHz BS N
V1.4.1 (2008-11) n devices MHz to 2 000 MHz;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
EN 301 357-1 communicatio devices in the range 25 9 kHz ∼ 10 GHz SF-1 N
Part 1: Technical
methods
Electromagnetic
spectrum Matters
Part 1: Technical
methods
106/433
No. KT393

Electromagnetic
spectrum Matters
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Cordless audio
Wired/wireless devices in the range 25
EN 301 357-2 communicatio MHz to 2 000 MHz; 9 kHz ∼ 10 GHz SF-3 N
V1.4.1 (2008-11) n devices Part 2: Harmonized EN
covering essential
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
covering essential
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
covering essential
3.2 of the R&TTE
Directive
Electromagnetic
spectrum Matters
EN 301 357-2 communicatio MHz to 2 000 MHz; 9 kHz ∼ 10 GHz BS N
covering essential
3.2 of the R&TTE
Directive
107/433
No. KT393

Global System for
Mobile communications
(GSM);
Harmonised EN for
Wired/wireless mobile stations in the
EN 301 511 GSM 900 and GSM
V12.1.1 communicatio 1800 bands 30 MHz ∼ 4 GHz SF-3 N
covering
under article 3.2 of the
R&TTE directive
(1999/5/EC)
Clause 5.3.16, 17
Global System for

(GSM);
Harmonised EN for
covering
R&TTE directive
(1999/5/EC)
Clause 5.3.16, 17
Global System for

(GSM);
Harmonised EN for
covering
R&TTE directive
(1999/5/EC)
Clause 5.3.16, 17
Global System for

(GSM);
Harmonised EN for
V12.1.1 communicatio 1800 bands 30 MHz ∼ 4 GHz BS N
covering
R&TTE directive
(1999/5/EC)
Clause 5.3.16, 17
108/433
No. KT393

Global System for
(GSM); Mobile Stations
Wired/wireless (MS) equipment;
EN 301 511
communicatio covering the Standard
Harmonised
V12.5.1 30 MHz ~ 4 GHz BS N
essential
(2017-03) n devices requirements of article
3.2 of Directive
2014/53/EU
Clause 5.3.16, 17
Global System for

EN 301 511
Harmonised
V12.5.1 30 MHz ~ 4 GHz SF-1 N
essential
3.2 of Directive
2014/53/EU
Clause 5.3.16, 17
Global System for

EN 301 511
Harmonised
V12.5.1 30 MHz ~ 4 GHz SF-2 N
essential
3.2 of Directive
2014/53/EU
Clause 5.3.16, 17
Global System for

EN 301 511
Harmonised
V12.5.1 30 MHz ~ 4 GHz SF-3 N
essential
3.2 of Directive
2014/53/EU
Clause 5.3.16, 17
Global System for

(GSM); Harmonized EN
for mobile stations in
EN 301 511 V9.0.2 communicatio the
Wired/wireless GSM 900 and GSM
1800 bands covering 30 MHz ∼ 4 GHz SF-3 N
R&TTE directive
(1999/5/EC)
Clause 5.2.16, 17
109/433
No. KT393

Global System for
R&TTE directive
(1999/5/EC)
Clause 5.2.16, 17
Global System for

R&TTE directive
(1999/5/EC)
Clause 5.2.16, 17
Global System for

1800 bands covering 30 MHz ∼ 4 GHz BS N
R&TTE directive
(1999/5/EC)
Clause 5.2.16, 17
Electromagnetic
spectrum Matters
(ERM); Harmonized EN
for CDMA spread
spectrum mobile
EN 301 526 V1.1.1 communicatio stations
Wired/wireless operating in the
450 MHz cellular band 30 MHz ∼ 12.75 GHz BS N
(2006-07) n devices (CDMA 450) and 410,
450 and 870 MHz
PAMR bands(CDMA-
PAMR) covering
essential requirements
of article 3.2 of the
R&TTE Directive
110/433
No. KT393

Electromagnetic
spectrum Matters
for CDMA spread
spectrum mobile
450 MHz cellular band 30 MHz ∼ 12.75 GHz SF-1 N
450 and 870 MHz
PAMR bands(CDMA-
PAMR) covering
R&TTE Directive
Electromagnetic
spectrum Matters
for CDMA spread
spectrum mobile
450 and 870 MHz
PAMR bands(CDMA-
PAMR) covering
R&TTE Directive
Electromagnetic
spectrum Matters
for CDMA spread
spectrum mobile
450 and 870 MHz
PAMR bands(CDMA-
PAMR) covering
R&TTE Directive
Broadband Radio Access

Networks (BRAN);5 GHz
high performance RLAN;
communicatio Harmonized EN covering 30 MHz ∼ 26 GHz SF-3 N
(2012-06) the essential
3.2 of the R&TTE
Directive
111/433
No. KT393

3.2 of the R&TTE
Directive

3.2 of the R&TTE
Directive

communicatio Harmonized EN covering 30 MHz ∼ 26 GHz BS N
3.2 of the R&TTE
Directive

Networks (BRAN); 5
GHz high performance
communicatio RLAN; Harmonized EN 30 MHz ∼ 26 GHz BS N
(2015-03) covering the essential
3.2 of the R&TTE
Directive

Networks (BRAN); 5
communicatio RLAN; Harmonized EN 30 MHz ∼ 26 GHz SF-1 N
3.2 of the R&TTE
Directive

Networks (BRAN); 5
3.2 of the R&TTE
Directive
112/433
No. KT393

Networks (BRAN); 5
3.2 of the R&TTE
Directive
5 GHz RLAN;
Harmonised Standard
communicatio covering the essential 30 MHz ∼ 26 GHz SF-3 N
(2017-05) requirements of article
n devices 3.2 of Directive
2014/53/EU
5 GHz RLAN;
Harmonised Standard
2014/53/EU
5 GHz RLAN;
Harmonised Standard
2014/53/EU
5 GHz RLAN;
Harmonised Standard
communicatio covering the essential 30 MHz ∼ 26 GHz BS N
2014/53/EU
IMT cellular networks;

Harmonised Standard
Wired/wireless covering the essential
EN 301 908-1 requirements of article 30 MHz ~ 12.75 GHz
V11.1.1 (2016-07) communicatio BS N
3.2 of the Directive
n devices 2014/53/EU;
Part 1: Introduction and
common requirements

Harmonised Standard
V11.1.1 (2016-07) communicatio SF-1 N
common requirements
113/433
No. KT393

Harmonised Standard
common requirements

Harmonised Standard
common requirements

Wired/wireless Harmonised Standard
EN 301 908-1 for access to radio
V13.1.1 (2019-11) communicatio 30 MHz ∼ 12.75 GHz BS N
spectrum;
n devices Part 1: Introduction and
common requirements

V13.1.1 (2019-11) communicatio 30 MHz ∼ 12.75 GHz SF-1 N
spectrum;
common requirements

spectrum;
common requirements

spectrum;
common requirements

Harmonised Standard
EN 301 908-1 Wired/wireless for access to radio
V15.1.1 communicatio spectrum; 30 MHz ∼ 26 GHz BS N
(2021-09) n devices Part 1: Introduction and
common requirements
Release 15
114/433
No. KT393

Harmonised Standard
V15.1.1 communicatio spectrum; 30 MHz ∼ 26 GHz SF-1 N
common requirements
Release 15

Harmonised Standard
common requirements
Release 15

Harmonised Standard
common requirements
Release 15

Wired/wireless the essential
EN 301 908-1 requirements of article 30 MHz ∼ 12.75 GHz
V7.1.1 communicatio 3.2 of the R&TTE BS N
(2015-03) n devices Directive;
common requirements

V7.1.1 communicatio 3.2 of the R&TTE SF-1 N
common requirements

common requirements

common requirements
115/433
No. KT393

Harmonised Standard
Wired/wireless requirements of article
EN 301 908-11 communicatio 3.2 of the Directive 9 kHz ∼ 15 GHz SF-2 N
V11.1.2 (2017-01) n devices 2014/53/EU;
Part 11: CDMA Direct
Spread (UTRA FDD)
Repeaters

Harmonised Standard
EN 301 908-13 3.2 of the Directive
V11.1.1 communicatio 2014/53/EU; 9 kHz ∼ 12.75 GHz SF-2 N
(2016-07) n devices Part 13: Evolved
Universal Terrestrial
Radio Access (E-UTRA)
User Equipment (UE)

Harmonised Standard
EN 301 908-13 3.2 of the Directive
V11.1.2(2017-07) communicatio 9 kHz ∼ 26 GHz SF-2 N
2014/53/EU; Part 13:
n devices Evolved Universal
Terrestrial Radio Access
(E-UTRA) User
Equipment (UE)

Harmonised Standard
Wired/wireless for access to radio
EN 301 908-13 spectrum;
V13.1.1 (2019-11) communicatio 9 kHz ∼ 26 GHz SF-2 N
Part 13: Evolved
n devices Universal Terrestrial
User Equipment (UE)

Harmonised Standard
for access to radio
spectrum;
Part 13: Evolved
Wired/wireless Universal Terrestrial
EN 301 908-13 Radio Access (E-UTRA)
V13.2.1 communicatio User Equipment 9 kHz ∼ 26 GHz SF-2 N
(UE)
(2022-02) n devices [Exception]
4.2.13 Receiver Total
Radiated Sensitivity
(TRS)
4.2.14 Total Radiated
Power (TRP)
116/433
No. KT393

IIMT cellular networks;
the essential
EN 301 908-13 3.2 of the R&TTE
V6.2.1 communicatio Directive; 9 kHz ∼ 12.75 GHz SF-2 N
(2013-10) n devices Part 13: Evolved
User Equipment (UE)
IIMT cellular networks;

the essential
EN 301 908-13 3.2 of the R&TTE
V7.1.1 communicatio Directive; Part 13: 9 kHz ∼ 12.75 GHz SF-2 N
(2015-12) n devices Evolved Universal
Terrestrial Radio Access
(E-UTRA) User
Equipment (UE)

Harmonised Standard
EN 301 908-14 3.2 of Directive
V11.1.2 (2017-04) communicatio 9 kHz ∼ 12.75 GHz SF-2 N
2014/53/EU;
n devices Part 14: Evolved
Base Stations (BS)

Harmonised EN covering
the essential
EN 301 908-14 3.2 of the R&TTE
communicatio Directive; 9 kHz ∼ 12.75 GHz SF-2 N
V6.2.1 (2013-10) n devices Part 14: Evolved
Base Stations (BS)

Harmonised EN covering
the essential
EN 301 908-14 3.2 of the R&TTE
V7.1.1 (2015-07) n devices Part 14: Evolved
Base Stations (BS)
117/433
No. KT393

Harmonised Standard
V11.1.2 (2017-01) communicatio 9 kHz ∼ 12.75 GHz SF-2 N
2014/53/EU;
n devices Part 15: Evolved
Radio Access (E-UTRA
FDD) Repeaters

Harmonised Standard
V11.1.2 (2017-04) communicatio 9 kHz ∼ 19 GHz SF-2 N
2014/53/EU;
n devices Part 18: E-UTRA, UTRA
and GSM/EDGE
Multi-Standard Radio
(MSR) Base Station (BS)

the essential
EN 301 908-18 3.2 of the R&TTE
V7.1.2 (2014-07) n devices Part 18: E-UTRA, UTRA
and GSM/EDGE
Multi-Standard Radio
(MSR) Base Station (BS)

Harmonised Standard
requirements of
Wired/wireless article 3.2 of the
EN 301 908-19 communicatio Directive 2014/53/EU; 9 kHz ∼ 19 GHz SF-2 N
V6.2.6 (2016-01) n devices Part 19: OFDMA TDD
WMAN (Mobile
WiMAXTM)
TDD User Equipment
(UE)

Harmonised Standard
EN 301 908-2 Wired/wireless requirements of article
V11.1.1 communicatio 3.2 of the Directive 9 kHz ∼ 12.75 GHz SF-2 N
(2016-07) n devices 2014/53/EU; Part 2:
CDMA Direct Spread
(UTRA FDD) User
Equipment (UE)
118/433
No. KT393

Harmonised Standard
EN 301 908-2 communicatio 3.2 of the Directive 9 kHz ∼ 26 GHz SF-2 N
V11.1.2(2017-08) n devices 2014/53/EU; Part 2:
CDMA Direct Spread
(UTRA FDD) User
Equipment (UE)

Harmonised Standard
for access to radio
spectrum;
Part 2: CDMA Direct
Wired/wireless Spread (UTRA FDD) User
EN 301 908-2 communicatio Equipment (UE) 9 kHz ∼ 26 GHz SF-2 N
V13.1.1 (2020-06) n devices [Exception]
4.2.14 Receiver Total
Radiated Sensitivity
(TRS)
4.2.15 Total Radiated
Power (TRP)
IMT cellular
networks;Harmonized
EN overing the essential
V6.2.1 communicatio 3.2 of the R&TTE 9 kHz ∼ 12.75 GHz SF-2 N
Part 2: CDMA Direct
Spread (UTRA FDD) User
Equipment (UE)
IMT cellular
networks;Harmonized
EN overing the essential
V7.1.1 communicatio 3.2 of the R&TTE 9 kHz ∼ 12.75 GHz SF-2 N
Part 2: CDMA Direct
Spread (UTRA FDD) User
Equipment (UE)

Harmonised Standard
EN 301 908-3 communicatio 3.2 of Directive 9 kHz ~ 15 GHz SF-2 N
V11.1.3 (2017-04) n devices 2014/53/EU;
Part 3: CDMA Direct
Spread (UTRA FDD)
Base Stations (BS)
119/433
No. KT393

Harmonised Standard
Wired/wireless for access to radio
EN 301 908-3 communicatio spectrum; 9 kHz ∼ 15 GHz SF-2 N
V13.1.1 (2019-09) n devices Part 3: CDMA Direct
Spread (UTRA FDD)
Base Stations (BS)
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
EN 302 065-1 communicatio requirementsessential
covering the 30 MHz ∼ 40 GHz SF-3 N
V2.1.1 (2016-11) n devices of article 3.2 of the
Directive 2014/53/EU;
Part 1: Requirements for
Generic UWB
applications
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Generic UWB
applications
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Generic UWB
applications
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
covering the 30 MHz ∼ 40 GHz BS N
Generic UWB
applications
120/433
No. KT393

Short Range Devices
(SRD) using
Ultra Wide Band
technology (UWB);
EN 302 065-2 communicatio covering the essential 30 MHz ∼ 40 GHz SF-2 N
V2.1.1 (2016-11) n devices requirements
UWB location tracking
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
EN 302 065-2 communicatio covering the essential 30 MHz ∼ 40 GHz BS N
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
121/433
No. KT393

Short Range Devices
(SRD) using
Ultra Wide Band
technology (UWB);
Harmonised Standard
EN 302 065-3 communicatio requirements 30 MHz ∼ 40 GHz SF-3 N
UWB devices
for ground based
vehicular applications
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Harmonised Standard
UWB devices
for ground based
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Harmonised Standard
UWB devices
for ground based
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Harmonised Standard
EN 302 065-3 communicatio requirements 30 MHz ∼ 40 GHz BS N
UWB devices
for ground based
122/433
No. KT393

Short Range Devices
(SRD) using
Ultra Wide Band
technology (UWB);
Harmonised Standard
EN 302 065-4 communicatio requirements of 30 MHz ∼ 40 GHz BS N
V1.1.1 (2016-11) n devices article 3.2 of the
Part 4: Material Sensing
devices using
UWB technology below
10,6 GHz
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Harmonised Standard
EN 302 065-4 communicatio requirements of 30 MHz ∼ 40 GHz SF-1 N
devices using
10,6 GHz
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Harmonised Standard
devices using
10,6 GHz
Short Range Devices

(SRD) using
Ultra Wide Band
technology (UWB);
Harmonised Standard
devices using
10,6 GHz
123/433
No. KT393

Short Range Devices
(SRD)
using Ultra Wide Band
technology (UWB);
V1.1.1 (2017-09) n devices of article 3.2 of Directive
2014/53/EU;
Part 5: Devices using
UWB technology
onboard aircraft
Short Range Devices

(SRD)
technology (UWB);
2014/53/EU;
UWB technology
onboard aircraft
Short Range Devices

(SRD)
technology (UWB);
covering the 30 MHz ∼ 40 GHz BS N
2014/53/EU;
UWB technology
onboard aircraft
Short Range Devices

(SRD)
technology (UWB);
2014/53/EU;
UWB technology
onboard aircraft
124/433
No. KT393

Radio Frequency
Identification Equipment
operating in the band
865 MHz to 868 MHz
with power levels up to
2 W and in the band
communicatio 915 MHz to 921 MHz
power levels up to 30 MHz ∼ 5 GHz BS N
(2016-11) with
n devices 4 W;
Harmonised Standard
2014/53/EU
Radio Frequency
865 MHz to 868 MHz
2 W and in the band
power levels up to 30 MHz ∼ 5 GHz SF-1 N
(2016-11) with
n devices 4 W;
Harmonised Standard
2014/53/EU
Radio Frequency
865 MHz to 868 MHz
2 W and in the band
(2016-11) with
n devices 4 W;
Harmonised Standard
2014/53/EU
Radio Frequency
865 MHz to 868 MHz
2 W and in the band
(2016-11) with
n devices 4 W;
Harmonised Standard
2014/53/EU
125/433
No. KT393

Radio Frequency
865 MHz to 868 MHz
communicatio 2 W and
the band 915 MHz to 30 MHz ∼ 5 GHz SF-3 N
(2020-08) in
n devices 921 MHz with power
levels up to 4 W;
Harmonised Standard
for access to radio
spectrum
Radio Frequency
865 MHz to 868 MHz
the band 915 MHz to 30 MHz ∼ 5 GHz BS N
(2020-08) in
levels up to 4 W;
Harmonised Standard
for access to radio
spectrum
Radio Frequency
865 MHz to 868 MHz
(2020-08) in
levels up to 4 W;
Harmonised Standard
for access to radio
spectrum
Radio Frequency
865 MHz to 868 MHz
(2020-08) in
levels up to 4 W;
Harmonised Standard
for access to radio
spectrum
126/433
No. KT393

Electromagnetic
spectrum Matters
(ERM);
Radio Frequency
EN 302 208-1 Wired/wireless 865 MHz to 868 MHz
V2.1.1 communicatio with power levels up to 30 MHz ∼ 5 GHz BS N
(2015-02) n devices 2 W and in the band
915 MHz to 921 MHz
4 W;
Part 1: Technical
requirements and
methods of
measurement
Electromagnetic
spectrum Matters
(ERM);
Radio Frequency
V2.1.1 communicatio with power levels up to 30 MHz ∼ 5 GHz SF-1 N
915 MHz to 921 MHz
4 W;
Part 1: Technical
requirements and
methods of
measurement
Electromagnetic
spectrum Matters
(ERM);
Radio Frequency
915 MHz to 921 MHz
4 W;
Part 1: Technical
requirements and
methods of
measurement
127/433
No. KT393

Electromagnetic
spectrum Matters
(ERM);
Radio Frequency
915 MHz to 921 MHz
4 W;
Part 1: Technical
requirements and
methods of
measurement
Electromagnetic
compatibility
and Radio spectrum
Matters (ERM);
Radio Frequency
operating in the
Wired/wireless band 865 MHz to 868
EN 302 208-2 communicatio up to 2 W power
MHz with levels 30 MHz ∼ 5 GHz BS N
V2.1.1 (2015-02) and
n devices in the band 915 MHz to
921 MHz with power
levels up to 4 W;
requirements of
Directive
Electromagnetic
compatibility
and Radio spectrum
Matters (ERM);
Radio Frequency
operating in the
MHz with levels 30 MHz ∼ 5 GHz SF-1 N
V2.1.1 (2015-02) and
921 MHz with power
levels up to 4 W;
requirements of
Directive
128/433
No. KT393

Electromagnetic
compatibility
and Radio spectrum
Matters (ERM);
Radio Frequency
operating in the
V2.1.1 (2015-02) and
921 MHz with power
levels up to 4 W;
requirements of
Directive
Electromagnetic
compatibility
and Radio spectrum
Matters (ERM);
Radio Frequency
operating in the
V2.1.1 (2015-02) and
921 MHz with power
levels up to 4 W;
requirements of
Directive

Telematics (TTT);
Short Range Radar
equipment operating
communicatio in the 77 GHz to 81 30 MHz ∼ 162 GHz SF-3 N
(2017-05) GHz band;
3.2 of Directive
2014/53/EU
129/433
No. KT393

Telematics (TTT);
Short Range Radar
equipment operating
(2017-05) GHz band;
3.2 of Directive
2014/53/EU

Telematics (TTT);
Short Range Radar
equipment operating
(2017-05) GHz band;
3.2 of Directive
2014/53/EU

Telematics (TTT);
Short Range Radar
equipment operating
communicatio in the 77 GHz to 81 30 MHz ∼ 162 GHz BS N
(2017-05) GHz band;
3.2 of Directive
2014/53/EU
Electromagnetic
spectrum Matters
(ERM); Short Range
Wired/wireless Devices (SRD); Close
EN 302 291-1 communicatio Communication Data
Range Inductive 9 kHz ∼ 1 GHz BS N
V1.1.1 (2005-07) n devices equipment operating at
13,56 MHz;
Part 1: Technical
methods
130/433
No. KT393

Electromagnetic
spectrum Matters
(ERM); Short Range
Range Inductive 9 kHz ∼ 1 GHz SF-1 N
13,56 MHz;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short Range
13,56 MHz;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM); Short Range
13,56 MHz;
Part 1: Technical
methods
Electromagnetic
spectrum Matters
(ERM);Short Range
Wired/wireless Devices (SRD);Close
Range Inductive 9 kHz ∼ 1 GHz BS N
13,56 MHz; Part 2:
Harmonized EN under
Directive
131/433
No. KT393

Electromagnetic
spectrum Matters
(ERM);Short Range
13,56 MHz; Part 2:
Harmonized EN under
Directive
Electromagnetic
spectrum Matters
(ERM);Short Range
13,56 MHz; Part 2:
Harmonized EN under
Directive
Electromagnetic
spectrum Matters
(ERM);Short Range
13,56 MHz; Part 2:
Harmonized EN under
Directive
Broadband Data
Transmission Systems
operating in the 2 500
MHz to 2 690 MHz
Wired/wireless frequency band;
EN 302 544-1 Part 1: TDD Base
V1.1.2 communicatio Stations; Max. 12.75 GHz SF-2 N
(2010-01) n devices Harmonized EN covering
the essential
3.2 of the R&TTE
Directive
Broadcast Sound
Wired/wireless
EN 303 345-1 Receivers; Part 1 :
communicatio 150 kHz ∼ 6 GHz BS N
V1.1.1(2019-06) Generic requirements
n devices and measuring methods
132/433
No. KT393

Broadcast Sound
Wired/wireless
EN 303 345-2 Receivers;
V1.1.1(2020-02) Part 2: AM broadcast
n devices sound service;
Broadcast Sound
Wired/wireless
communicatio BS N
V1.2.1(2021-12) Part 2: AM broadcast 150 kHz ~ 6 GHz
Broadcast Sound
Wired/wireless
V1.1.0(2019-11) Part 3: FM broadcast
Broadcast Sound
Wired/wireless
V1.1.1(2021-06) Part 3: FM broadcast
Broadcast Sound
Wired/wireless
V1.1.0(2019-11) Part 4: DAB broadcast
Broadcast Sound
Wired/wireless
communicatio 150 kHz ~ 6 GHz BS N
V1.1.1(2021-06) Part 4: DAB broadcast
n devices sound service
Broadcast Sound
Wired/wireless
V1.1.1(2020-02) Part 5: DRM broadcast
Broadcast Sound
Wired/wireless
V1.2.1(2021-12) Part 5: DRM broadcast
Satellite Earth Stations

and Systems
(SES);Global Navigation
Satellite System (GNSS)
receivers;Radio
equipment operating in
Wired/wireless 1 164 MHz to 1 300
MHz and 1 559 MHz to 30 MHz ∼ 8.3 GHz SF-2 N
(2017-06) n devices 1 610 MHz frequency
bands;
Harmonised Standard
3.2 of Directive
2014/53/EU
133/433
No. KT393

and Systems
receivers;Radio
MHz and 1 559 MHz to 30 MHz ∼ 8.3 GHz BS N
bands;
Harmonised Standard
3.2 of Directive
2014/53/EU

and Systems
receivers;Radio
bands;
Harmonised Standard
3.2 of Directive
2014/53/EU

and Systems
receivers;Radio
bands;
Harmonised Standard
3.2 of Directive
2014/53/EU
134/433
No. KT393

and Systems (SES);
Global Navigation
receivers;
EN 303 413 V1.2.1 communicatio Radio
Wired/wireless equipment
operating in the 1 164 30 MHz ∼ 8.3 GHz SF-3 N
(2021-04) n devices MHz to 1 300 MHz and
1 559 MHz to 1 610
MHz frequency bands;
Harmonised Standard
for access to radio
spectrum

and Systems (SES);
Global Navigation
receivers;
1 559 MHz to 1 610
Harmonised Standard
for access to radio
spectrum

and Systems (SES);
Global Navigation
receivers;
operating in the 1 164 30 MHz ∼ 8.3 GHz BS N
1 559 MHz to 1 610
Harmonised Standard
for access to radio
spectrum

and Systems (SES);
Global Navigation
receivers;
1 559 MHz to 1 610
Harmonised Standard
for access to radio
spectrum
135/433
No. KT393

Wireless power
transmission using
technologies other than
radio frequency beam in
the 19 - 21 kHz, 59 - 61
kHz,
communicatio 79 - 90 kHz, 100 - 300 30 MHz ∼ 1 GHz BS N
(2016-12) kHz, 6 765 - 6 795 kHz
n devices ranges;
Harmonised Standard
3.2 of Directive
2014/53/EU
Wireless power
transmission using
the 19 - 21 kHz, 59 - 61
kHz,
communicatio 79 - 90 kHz, 100 - 300 30 MHz ∼ 1 GHz SF-3 N
(2016-12) kHz, 6 765 - 6 795 kHz
n devices ranges;
Harmonised Standard
3.2 of Directive
2014/53/EU
Wireless power
transmission using
the 19 - 21 kHz, 59 - 61
kHz,
(2016-12) kHz, 6 765 - 6 795 kHz
n devices ranges;
Harmonised Standard
3.2 of Directive
2014/53/EU
Wireless power
transmission using
the 19 - 21 kHz, 59 - 61
kHz,
(2016-12) kHz, 6 765 - 6 795 kHz
n devices ranges;
Harmonised Standard
3.2 of Directive
2014/53/EU
136/433
No. KT393

Wireless power
transmission systems,
using technologies other
than radio frequency
beam, in the 19 - 21
kHz,
(2017-09) kHz, 100 - 300 kHz,6
n devices 765 - 6 795 kHz ranges;
Harmonised Standard
3.2 of Directive
2014/53/EU
Wireless power
kHz,
(2017-09) kHz, 100 - 300 kHz,6
Harmonised Standard
3.2 of Directive
2014/53/EU
Wireless power
kHz,
communicatio 59 - 61 kHz, 79 - 90 30 MHz ∼ 1 GHz BS N
(2017-09) kHz, 100 - 300 kHz,6
Harmonised Standard
3.2 of Directive
2014/53/EU
Wireless power
kHz,
(2017-09) kHz, 100 - 300 kHz,6
Harmonised Standard
3.2 of Directive
2014/53/EU
137/433
No. KT393

Global System for
(GSM);
Wired/wireless GSM Repeaters;
EN 303 609 communicatio Harmonised Standard 9 kHz ∼ 12.75 GHz SF-3 N
requirements of
article 3.2 of the
Directive 2014/53/EU
Global System for

(GSM);
requirements of
article 3.2 of the
Global System for

(GSM);
requirements of
article 3.2 of the
Global System for

(GSM);
EN 303 609 communicatio Harmonised Standard 9 kHz ∼ 12.75 GHz BS N
requirements of
article 3.2 of the
Product standard to
demonstrate the
compliance of mobile
EN Wired/wireless phones with the basic
50360:2001/A1:2 communicatio restrictions related to 400 MHz ∼ 3 GHz BS N
012 n devices human exposure to
electromagnetic
fields(300 MHz ∼ 3
GHz)
138/433
No. KT393

Product standard to
demonstrate the
compliance of wireless
communication devices,
with the basic
Wired/wireless restrictions and
EN 50360:2017 exposure limit values
communicatio related to human 300 MHz ∼ 6 GHz BS N
(2017-10) n devices exposure to
electromagnetic fields in
the frequency range
from 300 MHz to 6
GHz: devices used next
to the ear
Product standard for

human exposure to
electromagnetic fields
from devices operating
Wired/wireless in the frequency range 0
EN 50364:2018 communicatio Hz to 300 GHz, used in 0 kHz ∼ 300 GHz BS N
(2018-02) n devices Electronic Article
Surveillance (EAS),
Radio Frequency
Identification (RFID) and
similar applications
Basic standard for the

calculation and
measurement of
electromagnetic field
strength and SAR
Wired/wireless related to human
EN 50383:2002 communicatio exposure from radio 110 MHz ∼ 40 GHz BS N
n devices base stations and fixed
terminal stations for
wireless
telecommunication
systems.(110 MHz ∼ 40
GHz)
Product standard to
demonstrate the
compliance of base
Wired/wireless station equipment with
EN 50385:2017 communicatio radiofrequency 110 MHz ∼ 100 GHz BS N
n devices electromagnetic field
exposure limits (110
MHz - 100 GHz), when
placed on the market
Product standard to
demonstrate the
compliance of base
Wired/wireless station equipment with
EN 50401:2017 communicatio radiofrequency 110 MHz ∼ 100 GHz BS N
(2017-10) n devices electromagnetic field
exposure limits (110
MHz - 100 GHz), when
put into service
139/433
No. KT393

Product standard to
demonstrate compliance
Wired/wireless of radio frequency fields
from handheld and
EN 50566:2013 communicatio body-mounted wireless 30 MHz ∼ 6 GHz BS N
n devices communication devices
used by the general
public (30 MHz - 6 GHz)
Product standard to
demonstrate compliance
Wired/wireless of radio frequency fields
EN from handheld and
50566:2013+AC:2 communicatio body-mounted wireless 30 MHz ∼ 6 GHz BS N
014 n devices communication devices
used by the general
public (30 MHz - 6 GHz)
Product standard to
demonstrate the
compliance of wireless
communication devices
with the basic
restrictions and
Wired/wireless exposure limit values
EN 50566:2017 related to human
communicatio exposure to 30 MHz ∼ 6 GHz BS N
(2017-10) n devices electromagnetic fields in
the frequency range
from 30 MHz to 6 GHz:
hand-held and body
mounted devices in
close proximity to the
human body
Generic standard for

assessment of low
Wired/wireless power electronic and
EN 50663:2017 communicatio related toequipment
electrical 10 MHz ∼ 300 GHz BS N
(2017-11) human
n devices exposure restrictions for
(10 MHz –300 GHz)
Human exposure to
radio frequency fields
from hand-held and
body-mounted wireless
– Human models,
Wired/wireless instrumentation, and
procedures
EN 62209-1:2006 communicatio Part 1: Procedure to 400 MHz ∼ 3 GHz BS N
n devices determine the specific
absorption rate (SAR)
for hand-held devices
used in close proximity
to the ear (frequency
range of 300 MHz to 3
GHz)
140/433
No. KT393

Measurement procedure
for the assessment of
specific absorption rate
of human exposure to
EN 62209-1:2016 Wired/wireless
communicatio from hand-held and
wireless 300 MHz ∼ 6 GHz BS N
(2016-11) body-mounted
Part 1: Devices used
next to the ear
(Frequency range of 300
MHz to 6 GHz)
Human exposure to
from hand-held and
communication devices.
Human models,
instrumentation, and
Wired/wireless procedures.
EN 62209-2:2010 communicatio Part 2: Procedure to 30 MHz ∼ 6 GHz BS N
n devices determine the specific
absorption rate (SAR)
for wireless
used in close proximity
to the human body
(frequency range of 30
MHz to 6 GHz)
Human exposure to
from hand-held and
- Human models,
EN 62209- Wired/wireless procedures
communicatio Part 2: Procedure to
2:2010+A1:2019 300 MHz ∼ 6 GHz BS N
determine the specific
(2019-07) n devices absorption rate (SAR)
for wireless
used in close
proximity to the human
body (frequency
GHz)
Assessment of electronic
Wired/wireless and electrical equipment
related to human
EN 62311:2008 communicatio exposure restrictions for 9 kHz ∼ 300 GHz BS N
n devices electromagnetic fields (0
Hz ∼ 300 GHz)
141/433
No. KT393

Evaluation of human
exposure to
from short range devices
(SRDs) in various
applications over the
EN 62369-1:2009 Wired/wireless
communicatio frequency range 0 GHz 0 kHz ∼ 300 GHz BS N
(2009-04) to 300 GHz
n devices Part 1: Fields produced
by devices used for
electronic article
surveillance, radio
frequency identification
and similar systems
Assessment of
compliance of low
poser electronic and
Wired/wireless electrical equipment
with the basic
EN 62479:2010 communicatio restrictions related to 10 MHz ∼ 40 GHz BS N
n devices human exposure to
electromagnetic
fields(10 MHz ∼
300GHz)
Assessment of electronic
Wired/wireless and electrical equipment
EN IEC related to human
62311:2020 communicatio exposure restrictions for 0 Hz ∼ 300 GHz BS N
(2019-04) n devices electromagnetic fields (0
Hz to 300 GHz)
Wired/wireless Unlicensed national

FCC Part 15 Sub communicatio information 9 kHz ∼ 40 GHz SF-1 N
part E :2015 n devices infrastructure devices


Wired/wireless
FCC Part 15 communicatio Intentional Radiators 9 kHz ∼ 40 GHz SF-3 N
Subpart C :2015 n devices
Wired/wireless
Wired/wireless
142/433
No. KT393

Radio frequency
Wired/wireless
FCC Part radiation exposure
2.1091:2015 evaluation: mobile
n devices devices.
Radio frequency
Wired/wireless
FCC Part radiation exposure
communicatio 400 MHz ∼ 6 GHz BS N
2.1093:2015 evaluation: portable
n devices devices.
Wired/wireless Cellular Radiotelephone

FCC Part 22 communicatio Service 9 kHz ∼ 10 GHz SF-1 N
Subpart H :2015 n devices


Wired/wireless
FCC Part 24 communicatio Broadband PCS 9 kHz ∼ 20 GHz SF-1 N
Subpart E :2015 n devices
Wired/wireless
Wired/wireless
Wired/wireless
FCC Part 27 communicatio Technical Standards 9 kHz ∼ 27 GHz SF-3 N
Wired/wireless
Wired/wireless
1695-1710 MHZ, 1710-

Wired/wireless 1755 MHZ, 1755-1780
FCC Part 27 communicatio MHZ, 2110-2155 MHZ, 9 kHz ∼ 22 GHz SF-3 N
Subpart L :2015 n devices 2155-2180 MHZ, 2180-
2200 MHZ BANDS
1695-1710 MHZ, 1710-

2200 MHZ BANDS
143/433
No. KT393

1695-1710 MHZ, 1710-
2200 MHZ BANDS
Wired/wireless Broadband Radio

FCC Part 27 communicatio Service and Educational 9 kHz ∼ 27 GHz SF-3 N
Subpart M :2015 n devices Broadband Service


INTELLIGENT
Wired/wireless
FCC Part 90 TRANSPORTATION
communicatio 9 kHz ∼ 40 GHz SF-1 N
Subpart M :2015 SYSTEMS RADIO
n devices SERVICE
INTELLIGENT
Wired/wireless
n devices SERVICE
INTELLIGENT
Wired/wireless
n devices SERVICE
REGULATIONS
GOVERNING LICENSING
Wired/wireless AND USE OF
FCC Part 90 communicatio FREQUENCIES IN THE 9 kHz ∼ 10 GHz SF-1 N
Subpart S :2015 n devices 806-824, 851-869, 896-
901, AND 935-940 MHZ
BANDS
REGULATIONS
GOVERNING LICENSING
901, AND 935-940 MHZ
BANDS
REGULATIONS
GOVERNING LICENSING
901, AND 935-940 MHZ
BANDS
144/433
No. KT393

DEDICATED SHORT-
Wired/wireless RANGE
FCC Part 95 communicatio COMMUNICATIONS 9 kHz ∼ 40 GHz SF-1 N
Subpart L :2015 n devices SERVICE ON-BOARD
UNITS (DSRCS-OBUS)
DEDICATED SHORT-
UNITS (DSRCS-OBUS)
DEDICATED SHORT-
UNITS (DSRCS-OBUS)
Wired/wireless FiRa Consortium PHY

FiRa Consortium communicatio Conformance Test 4.9 to 19.4GHz SF-2 N
Wired/wireless FiRa Consortium UWB

FiRa Consortium communicatio MAC Conformance Test MAC Protocol SF-2 N
Human exposure to
from hand-held and
Wired/wireless communication devices
- Human models,
IEC 62209-1:2005 communicatio instrumentation, and 400 MHz ∼ 3 GHz BS N
n devices procedures - Part 1:
Procedure to determine
the specific absorption
rate (SAR) for hand-held
devices used in close
of human exposure to
Wired/wireless radio frequency fields
from hand-held and
IEC 62209-1:2016 communicatio body-mounted wireless 300 MHz ∼ 6 GHz BS N
– Part 1: Devices used
next to the ear
MHz to 6 GHz)
145/433
No. KT393

Human Exposure to
Radio Frequency Fields
from Handheld and
Body-Mounted Wireless
Communication Devices
- Human models,
Wired/wireless Instrumentation, and
Procedures -Part 2:
IEC 62209-2:2010 communicatio Procedure to determine 30 MHz ∼ 6 GHz BS N
n devices the specific absorption
rate (SAR) for mobile
wireless communication
devices used in close
body (frequency range
of 30 MHz to 6 GHz)
Human exposure to
from hand-held and
-
Human models,
IEC 62209-
2:2010/AMD1:201 communicatio procedures
Wired/wireless -
Part 2: Procedure to 300 MHz ∼ 6 GHz BS N
9 n devices determine the specific
(2019-05) absorption rate (SAR)
for wireless
used in close
body (frequency
GHz)
of
human exposure to
Wired/wireless from hand-held and
IEC/IEEE 62209- body-mounted
1528:2020 (2020- communicatio wireless communication 4 MHz ∼ 10 GHz BS N
10) n devices devices –
Part 1528: Human
models,
procedures
MHz to 10 GHz)
146/433
No. KT393

Assessment of power
density of human
exposure to radio
frequency fields from SAR: 6 GHz – 7.125
Wired/wireless wireless devices in close GHz
IEC/IEEE 63195- communicatio proximity to the head PD: 6 GHz – 18 GHz, BS N
1:2022 n devices and body (frequency 26.5 GHz – 40 GHz,
range of 50 GHz – 75 GHz
6 GHz to 300 GHz) –
Part 1: Measurement
procedure
Recommended Practice
for Determining the
Wired/wireless Peak Spatial-Average
IEEE 1528-2003 communicatio Specific Absorption 400 MHz ∼ 6 GHz BS N
n devices Rate(SAR) in the Human
Head from Wireless
Communications
IEEE Recommended
Practice for
Determining the Peak
Wired/wireless Spatial-Average Specific
Absorption Rate (SAR) SAR: 400 MHz ∼ 6
IEEE 1528-2013 communicatio in the Human Head BS N
GHz
n devices from Wireless
Communications
Devices: Measurement
Techniques
IEEE Standard for Safety

Wired/wireless Levels with Respect to
IEEE Std C95.1-
communicatio Electric, Exposure
Human to 300 MHz ∼ 6 GHz,
2019 BS N
Magnetic, and 26.5 GHz ~ 40 GHz
(2019-02) n devices Electromagnetic Fields,
0 Hz to 300 GHz
IEEE Recommended
Practice for
Measurements and SAR: 300 MHz – 7.125
Wired/wireless Computations of GHz
IEEE C95.3-2021 communicatio Electric, Magnetic, and PD: 6 GHz – 18 GHz, BS N
n devices Electromagnetic Fields 26.5 GHz – 40 GHz,
with Respect to Human 50 GHz – 75 GHz
Exposure to Such Fields,
0 Hz to 300 GHz
Evaluating Procedure
OET Bulletin 65 Wired/wireless with FCC Guidelines for
supplement communicatio Human Expose to Radio 9 kHz ∼ 40 GHz BS N
C:2001 n devices frequency
Electromagnetic Field.
Bluetooth Low Energy

Wired/wireless RF PHY Test Suite
RF-PHY.TS : 2017 communicatio 9 kHz ∼ 18 GHz BS N
Structure(TSS) and Test
n devices Purpose(TP)
147/433
No. KT393

Bluetooth Radio
Wired/wireless Frequency Test Suite
RF.TS : 2017 communicatio 9 kHz ∼ 18 GHz BS N
Structure(TSS) and Test
n devices Purpose(TP)
Radio Frequency (RF)

Wired/wireless Exposure Compliance SAR: 400 MHz ∼ 6
RSS-102:Issue communicatio of Radiocommunication GHz BS N
5(2015-03) n devices Apparatus (All MPE: 3 kHz ∼ 300 GHz
Frequency Bands)
Land Mobile and Fixed

Wired/wireless
RSS-119: Issue Equipment Operating in 9 kHz ∼ 10 GHz
communicatio SF-3 N
12(2015-05) the Frequency Range
n devices 27.41-960 MHz

Wired/wireless
communicatio SF-2 N

Wired/wireless
communicatio SF-1 N
Mobile Broadband
Wired/wireless Services (MBS)
communicatio the Frequency SF-3 N
1(2013-10) n devices Bands 698-756 MHz
and 777-787 MHz
Mobile Broadband
and 777-787 MHz
Mobile Broadband
and 777-787 MHz
Cellular Telephone
Wired/wireless
RSS-132 Issue 3 Systems Operating in
communicatio the Bands 824-849 MHz 9 kHz ∼ 10 GHz SF-1 N
(2013-01) n devices and 869-894 MHz
Cellular Telephone
Wired/wireless
148/433
No. KT393

Cellular Telephone
Wired/wireless
Wired/wireless 2 GHz Personal

RSS-133 Issue 6 communicatio Communications 9 kHz ∼ 20 GHz SF-3 N
(2018-01) n devices Services


Advanced Wireless
Wired/wireless Services (AWS)
communicatio the Bands 1710-1780 SF-1 N
3(2015-07) n devices MHz and 2110-2180
MHz
Advanced Wireless
3(2015-07) n devices MHz and 2110-2180
MHz
Advanced Wireless
3(2015-07) n devices MHz and 2110-2180
MHz
Mobile Earth Stations

(MESs) and Ancillary
Wired/wireless Terrestrial Component
RSS-170: Issue communicatio (ATC) Equipment 9 kHz ∼ 25 GHz SF-3 N
3(2015-07) n devices Operating in the Mobile-
Satellite Service (MSS)
Bands

Bands
149/433
No. KT393

Bands
Wireless
Wired/wireless Communication Service
RSS-195: Issue (WCS) Equipment
communicatio Operating in the Bands 9 kHz ∼ 25 GHz SF-2 N
2(2014-04) n devices 2305-2320 MHz and
2345-2360 MHz
Wireless
2(2014-04) n devices 2305-2320 MHz and
2345-2360 MHz
Wireless
2(2014-04) n devices 2305-2320 MHz and
2345-2360 MHz
Broadband Radio
Wired/wireless
RSS-199: Issue Service (BRS) Equipment 9 kHz ∼ 27 GHz
communicatio SF-1 N
2(2014-10) Operating in the
n devices Band 2500-2690 MHz
Broadband Radio
Wired/wireless
communicatio SF-2 N
Broadband Radio
Wired/wireless
communicatio SF-3 N
Licence-exempt Radio
Wired/wireless
RSS-210:Issue 8 Apparatus (All
(2010-12) Frequency Bands):
n devices Category I Equipment
Wired/wireless
Wired/wireless
150/433
No. KT393

Wired/wireless Wireless Power Transfer
RSS-216: Issue communicatio Devices 9 kHz ∼ 1 GHz SF-1 N
2(2016-01) n devices


Digital Transmission
Systems (DTSs),
Wired/wireless Frequency Hopping
RSS-247: Issue communicatio Systems (FHSs) and 9 kHz ∼ 40 GHz SF-2 N
1(2015-05) n devices Licence-Exempt Local
Area Network (LE-LAN)
Devices
Systems (DTSs),
Devices
Systems (DTSs),
Devices
Digital cellular
telecommunications
system(Phase 2+);
Mobile Station(MS)
TS 151 010-1 Wired/wireless conformance
V12.7.0 communicatio specification; 30 MHz ∼ 4 GHz BS N
Part 1: Conformance
(2016-02) n devices specification
(3GPP TS 51.010-1
version 12.5.0 Release
12)
Clause 12.2
151/433
No. KT393

Digital cellular
telecommunications
system(Phase 2+);
Mobile Station(MS)
V12.7.0 communicatio specification; 30 MHz ∼ 4 GHz SF-1 N
Part 1: Conformance
(3GPP TS 51.010-1
12)
Clause 12.2
Digital cellular
telecommunications
system(Phase 2+);
Mobile Station(MS)
Part 1: Conformance
(3GPP TS 51.010-1
12)
Clause 12.2
Digital cellular
telecommunications
system(Phase 2+);
Mobile Station(MS)
Part 1: Conformance
(3GPP TS 51.010-1
12)
Clause 12.2
Digital cellular
telecommunications
system (Phase 2+);
Wired/wireless Mobile Station (MS)
TS 151 010-1 conformance
V12.8.0 (2016-05) communicatio 30 MHz ∼ 4 GHz BS N
specification;
n devices Part 1: Conformance
specification(3GPP TS
51.010-1 version 12.6.0
Release 12)
Digital cellular
telecommunications
system (Phase 2+);
V12.8.0 (2016-05) communicatio 30 MHz ∼ 4 GHz SF-1 N
specification;
51.010-1 version 12.6.0
Release 12)
152/433
No. KT393

Digital cellular
telecommunications
system (Phase 2+);
specification;
51.010-1 version 12.6.0
Release 12)
Digital cellular
telecommunications
system (Phase 2+);
specification;
51.010-1 version 12.6.0
Release 12)
153/433
No. KT393

03.010 Medical devices

Medical electrical
equipment - Part 1-10:
General requirements
for basic safety and
IEC 60601-1- Medical essential performance -
10:2007 - SF-1 N
devices Collateral Standard:
(1st edition) Requirements for the
development of
physiologic closed-loop
controllers
Medical electrical
10:2007 - SF-1 N
+A1:2013 (Ed.1.1) Requirements for the
development of
controllers
Medical electrical
10:2007+AMD1:2 - SF-1 N
020 (Ed.1.2) Requirements for the
development of
controllers
Medical electrical
General requirements Peak acceleration:
for basic safety and Max. 100 g
essential performance -
IEC 60601-1- Acceleration
Medical Collateral Standard:
11:2010 amplitude: Max. 1.0 SF-3 N
devices Requirements for
(1st edition) (m/s²)²/Hz
medical electrical Drop height: Max. 0.25
equipment and medical m
electrical systems used
in the home healthcare
environment
154/433
No. KT393

Medical electrical
for basic safety and Max. 1 000 m/s²
essential performance - Acceleration
IEC 60601-1- Medical Collateral Standard: amplitude: Max. 1.0 SF-3 N
11:2015 (Ed. 2.0) devices Requirements for (m/s²)²/Hz
environment
Medical electrical
for basic safety and Max. 1 000 m/s²
essential performance -
IEC 60601-1- Acceleration
Medical Collateral Standard:
11:2015/AMD1 amplitude: Max. 1.0 SF-3 N
devices Requirements for
(Ed. 2.1) (m/s²)²/Hz
environment
Medical electrical
equipment Part 1-1:
General requirements Supply voltage(AC):
IEC 60601-1- Medical for safety - Collateral Max. 500 V SF-1 N
1:2000 devices standard: Safety Leakage current: Max.
requirements for 0.5 mA
medical electrical
systems
Medical electrical
equipment - Part 1:
General requirements Supply
for safety, 3. Collateral
IEC 60601-1- Medical voltage(AC):Max.500V
standard: General SF-1 N
3:1994 devices Half-value layer:
requirements for Max.4.1mmAl
radiation protection in
diagnostic X-ray
equipment
Medical electrical
General requirements Supply
IEC 60601-1- Medical voltage(AC):Max.500V
essential performance - SF-1 N
3:2008 devices Half-value layer:
Collateral Standard: Max.5.4mmAl
Radiation protection in
diagnostic X-ray
equipment
155/433
No. KT393

Medical electrical
equipment - Part 1-3: Supply voltage(AC):
IEC 60601-1- Max. 500 V
3:2008 Medical Half-value layer: Max.
essential performance – SF-1 N
+AMD1:2013(Ed. devices 5.4 mm Al
Collateral standard:
2.1) Leakage radiation:
Radiation protection in Max. 1.0 mGy
diagnostic X-ray
equipment
Medical electrical
IEC 60601-1- Max. 500 V
3:2008 Medical Half-value layer: Max.
essential performance – SF-1 N
+AMD2:2021 devices 5.4 mm Al
Collateral standard:
(Ed. 2.2) Leakage radiation:
Radiation protection in Max. 1.0 mGy
diagnostic X-ray
equipment
Medical electrical
equipment. - Part 1-4:
IEC 60601-1- General requirements
Medical
4:1996 for safety - Collateral - SF-1 N
devices
+A1:1999 standard:
Programmable electrical
medical systems
Medical electrical
IEC 60601-1-6 Medical for basic safety and - SF-1 N
(Ed.3.1) devices essential performance
- Collateral standard:
Usability
Medical electrical
Medical
6:2010 for basic safety and - SF-1 N
devices
(3rd edition) essential performance -
Collateral standard :
Usability
Medical electrical
Medical
6:2010/AMD2:202 for basic safety and - SF-1 N
devices
0 (Ed. 3.2) essential performance -
Collateral standard :
Usability
156/433
No. KT393

Medical electrical
for safety - Collateral Supply voltage(AC):
IEC 60601-1- Standard: General
Medical Max. 500 V
8:2003 +A1:2006 requirements, tests and SF-1 N
devices Sound pressure: Max.
(1st edition) guidance for alarm 94 dB
systems in medical
electrical equipment and
medical electrical
systems.
Medical electrical
essential performance - Supply voltage(AC):
IEC 60601-1- Medical Collateral Standard: Max. 500 V
8:2006 SF-1 N
devices General requirements, Sound pressure: Max.
(2nd edition) tests and guidance for 94 dB
alarm systems in medical
medical electrical
systems.
Medical electrical
essential performance - Supply voltage(AC):
IEC 60601-1- Medical Collateral Standard: Max. 500 V
8:2006 +A1:2012 SF-1 N
devices General requirements, Sound pressure: Max.
(2nd edition) tests and guidance for 94 dB
medical electrical
systems.
Medical electrical
IEC 60601-1- essential performance - Supply voltage(AC):
8:2006/AMD2:202 Medical Collateral Standard: Max. 500 V SF-1 N
0 devices General requirements, Sound pressure: Max.
(Ed. 2.2) tests and guidance for 94 dB
medical electrical
systems.
Medical electrical
IEC 60601-1- for basic safety and
Medical
9:2007 essential performance - - SF-1 N
devices
(1st edition) Collateral Standard:
Requirements for
environmentally
conscious design
157/433
No. KT393

Medical electrical
Medical
9:2007 essential performance - - SF-1 N
devices
+A1:2013 (Ed.1.1) Collateral Standard:
Requirements for
environmentally
conscious design
Medical electrical
Medical
9:2007+AMD2:20 essential performance - - SF-1 N
devices
20 (Ed.1.2) Collateral Standard:
Requirements for
environmentally
conscious design
Medical electrical
equipment - Part 1.
for safety
[Exception]
25. Expelled parts
Section 6. Protection Supply voltage: Max.
against hazards of 500 V
ignition of flammable Dielectric strength:
IEC 60601- anaesthetic mixtures
Medical Max. 5 kV
1:1988+A1:1991 44.6 Ingress of liquids SF-1 N
devices Leakage current: Max.
+A2:1995 44.7 Cleaning, 10 mA
sterilization and Temperature: Max.
disinfection 200 °C
45. Pressure vessels and
parts subject to pressure
56.6 Temperature and
overload control devices
56.11 Cord-connected
hand-held and foot-
operated control devices
158/433
No. KT393

Medical electrical
equipment - Part 1:
essential performance
[Exception]
8.8.4.2 Resistance to
environmental stress
8.9.1.7 Material group
classification
9.5 Expelled parts
hazards Supply voltage: Max.
10.4 Lasers and light 500 V
emitting diodes (LEDs) Dielectric strength:
11.2.2 ME equipment
Medical Max. 5 kV
IEC 60601-1:2005 and ME systems used in SF-1 N
conjunction with oxygen 10 mA
rich environment Temperature: Max.
11.6.5 Ingress of water 200 °C
or particulate matter
11.6.7 Sterilization
15.4.2.1 f) Application
15.4.3.4 Lithium battery
15.4.7.3 b) Entry of
liquids
Annex G Protection
against hazards of
ignition of flammable
anaesthetic mixtures
Annex L 3.2 Flexibility
and adherence
159/433
No. KT393

Medical electrical
equipment - Part 1:
[Exception]
classification
9.5 Expelled parts
emitting diodes (LEDs) Dielectric strength:
IEC 60601- 11.2.2 ME equipment
Medical Max. 5 kV
1:2005+AMD1:20 and ME systems used in SF-1 N
12 conjunction with oxygen 10 mA
liquids
Annex G Protection
against hazards of
and adherence
160/433
No. KT393

Medical electrical
equipment - Part 1:
[Exception]
classification
9.5 Expelled parts
emitting diodes (LEDs)
IEC 60601- Dielectric strength:
11.2.2 ME equipment
1:2005+AMD1:20 Medical Max. 5 kV
and ME systems used in SF-1 N
12+ AMD2:2020 devices Leakage current: Max.
conjunction with oxygen
(Ed. 3.2) 10 mA
liquids
Annex G Protection
against hazards of
and adherence
Medical electrical Supply voltage(AC):

IEC 60601-2- equipment - Part 2-10:
Medical Max. 480 V
10:1987+A1:2001 Particular requirements SF-1 N
devices Output current: Max.
(1st edition) for the safety of nerve 100 mA
and muscle stimulators
Medical electrical
IEC 60601-2- Particular requirements
Medical Max. 480 V
10:2012+A1:2016 for the basic safety and SF-1 N
devices Output current: Max.
(2.1 edition) essential performance of 100 mA
nerve and muscle
stimulators
Supply voltage(AC):
Medical electrical Max. 500 V
IEC 60601-2- equipment - Part 2:
Medical Dielectric strength:
18:1996 particular requirements SF-1 N
devices Max. 5 kV
+A1:2000 for the safety of Temperature: Max.
endoscopic equipment 200 °C

equipment - Part 2-18: Max. 500 V
IEC 60601-2- Medical Particular requirements Dielectric strength:
18:2009 SF-1 N
devices for the basic safety and Max. 5 kV
(3rd edition) essential performance of Temperature: Max.
endoscopic equipment 200 °C
161/433
No. KT393

equipment - Part 2: Max. 500 V
IEC 60601-2- Medical Particular requirements Leakage current: Max.
22:1995 SF-1 N
devices for safety of diagnostic 10 mA
(2nd edition) and therapeutic laser Laser radiation: Max.
equipment 50 mW
Medical electrical
Particular requirements Max. 500 V
IEC 60601-2- Medical Leakage current: Max.
essential performance of SF-1 N
22:2019 (Ed. 4.0) devices 10 mA
surgical, cosmetic, Laser radiation: Max.
therapeutic and 50 mW
diagnostic laser
equipment
Supply voltage(AC):
24:1998 Particular requirements SF-1 N
devices Max. 5 kV
(1st edition) for the safety of infusion Laser radiation: Max. 5
pumps and controllers mA

24:2012 for the basic safety and SF-1 N
devices Max. 5 kV
(2nd edition) essential performance of Leakage current: Max.
infusion pumps and 1 mA
controllers
Supply voltage(AC):
25:1993+A1:1999 Particular requirements SF-1 N
devices Max. 5 kV
(1st edition) for the safety of Leakage current: Max.
electrocardiographs 5 mA

IEC 60601-2- Medical Particular requirements Dielectric strength:
25:2011 SF-1 N
devices for the basic safety and Max. 5 kV
(2nd edition) essential performance of Leakage current: Max.
electrocardiographs 1 mA
Medical electrical
Medical Max. 500 V
27:2005 for the safety, including SF-1 N
devices Dielectric strength
(2nd edition) essential performance, Max. 1.5 kV
of electrocardiographic
monitoring equipment
162/433
No. KT393

Medical electrical
Medical Max. 500 V
devices Dielectric strength
(3rd edition) essential performance of Max. 1.5 kV
electrocardiographic
Supply voltage(AC):
equipment - Part 2: Dielectric strength:
particular requirements
IEC 60601-2- Medical Max. 5 kV
for the safety of X-ray SF-1 N
28:1993 devices Leakage current: Max.
source assemblies and 10 mA
X-ray tube assemblies Temperature: Max.
for medical diagnosis 200 °C
Supply voltage(AC):
equipment - Part 2-28: Dielectric strength:
IEC 60601-2- Medical Max. 5 kV
for the basic safety and SF-1 N
28:2017 devices Leakage current: Max.
essential performance of 10 mA
X-ray tube assemblies Temperature: Max.
for medical diagnosis 200 °C
Medical electrical
for the safety f high
IEC 60601-2- Capacitance:Max.100n
Medical frequency surgical
2:2006 F SF-1 N
devices equipment
(4th edition) Frequency:Max.5MHz
[Exception]
59.104.5 NE shall not
subject a PATIENT to a
risk
Medical electrical
for the basic safety and
essential performance of Capacitance:Max.100n
IEC 60601-2- Medical high frequency surgical F
2:2017 (6th SF-1 N
devices equipment and high
edition) Frequency:Max.5MHz
frequency surgical
accessories
[Exception]
201.15.101.5 NE
thermal performance
Supply voltage(AC):
equipment. - Part 2-30: Dielectric strength:
Particular requirements Max. 5 kV
IEC 60601-2- for the safety. including
Medical Leakage current: Max.
30:1999 essential performance, SF-1 N
devices 10 mA
(2nd edition) of automatic cycling Temperature: Max.
non-invasive blood 200 °C
pressure monitoring cuffs pressure: Max.
equipment 360 mmHg
163/433
No. KT393

Medical electrical
equipment - Part 2:
IEC 60601-2- Medical particular requirements Drop height: Max. 5 SF-1 N
32:1994 devices for the safety of cm
associated equipment of
X-ray equipment
Medical electrical
for the safety, including Dielectric strength:
essential performance,
IEC 60601-2- Max. 1.5 kV
Medical of invasive blood
34:2000 Leakage current: Max. SF-1 N
devices pressure monitoring
(2nd edition) 0.05 mA Pressure:
equipment Max. 4 000 mmHg
[Exception] Sound pressure: Max.
51.102.2 Accuracy of 94 dB
systolic and diastolic
pressure
Medical electrical
for the basic safety and Dielectric strength:
IEC 60601-2- essential performance of Max. 5 kV
Medical
34:2011 invasive blood pressure Leakage current: Max. SF-1 N
devices
(3rd edition) monitoring equipment 0.5 mA Pressure: Max.
[Exception] 4 000 mmHg
201.12.1.101.2 Sound pressure: Max.
Accuracy of systolic and 94 dB
diastolic pressure
Supply voltage(AC):
IEC 60601-2- Dielectric strength:
particular requirements
37:2001 Medical Max. 5 kV
for the safety of SF-1 N
+A1:2004+A2:200 devices Leakage current: Max.
ultrasonic medical
5 0.5 mA
diagnostic and Temperature: Max.
monitoring equipment 200 °C

Particular requirements Dielectric strength:
IEC 60601-2- Medical for the basic safety and Max. 5 kV
37:2007+AMD1:2 SF-1 N
devices essential performance of Leakage current: Max.
015 ultrasonic medical 0.5 mA
diagnostic and Temperature: Max.
monitoring equipment 200 °C

Medical Temperature: Max.
43:2000 for the safety of X-ray SF-1 N
devices 200 °C
(1st edition) equipment for Half-value layer: Max. 6
interventional mm Al
procedures
164/433
No. KT393

Medical electrical
IEC 60601-2- Particular requirements Max. 500 V
43:2010/AMD1:20 Medical for the basic safety and Phantom thickness: SF-1 N
17 devices essential performance of Max. 20 cm
(Ed. 2.1) X-ray equipment for Attenuation aluminium
interventional thickness: Max. 45 mm
procedures
Supply voltage(AC):
Max. 500 V
Phantom thickness:
Max. 20 cm
Medical electrical Attenuation aluminium
equipment - Part 2-43: thickness: Max. 45 mm
Particular requirements Measuring tube
IEC 60601-2- Medical for the basic safety and voltage: (40 to 150) kV
43:2010/AMD2:20 SF-1 N
devices essential performance of Measuring tube
19 X-ray equipment for current: (0.1 to 1 500)
interventional mA
procedures Measuring radiation
dosage:0.1 uR to 2.4
kR
Measuring Irradiation
time: 1 ms to 999 s

IEC 60601-2- Medical particular requirements Leakage current: Max.
44:2001 SF-1 N
devices for the safety of X-ray 10 mA
+A1:2002 equipment for Temperature: Max.
computed tomography 200 °C

Medical Leakage current:
devices Max.10 mA
+A1:2012 essential performance of Temperature: Max.
X-ray equipment for 200 °C
computed tomography
Supply voltage(AC):
Max. 500 V
Leakage current: Max.
10 mA
Temperature: Max.
Medical electrical
equipment - Part 2-44: 200 °C
IEC 60601-2- Particular requirements voltage: (70tube
Measuring
44:2009 Medical to 150) kV
for the basic safety and Measuring tube SF-1 N
+AMD1:2012+AM devices essential performance of current:
D2:2016 X-ray equipment for
computed tomography (0.1 to 1 500) mA
Measuring radiation
dosage:10 uGy to 999
Gy
time: 10 ms to 999 s
165/433
No. KT393

Supply voltage(AC):
equipment - Part 2-49: Leakage current: Max.
IEC 60601-2- Medical Particular requirements 10 mA
49:2001 SF-1 N
devices for the safety of Dielectric strength:
(1st edition) multifunction patient Max. 5 kV
monitoring equipment Sound pressure: Max.
85 dB(A)

devices 10 mA
(2nd edition) essential performance of Dielectric strength:
multifunction patient Max. 5 kV

Particular requirements Leakage current: Max.
IEC 60601-2- Medical for the basic safety and 10 mA
54:2009+AMD1:2 SF-1 N
devices essential performace of Phantom thickness:
015 X-ray equipment for Max. 20 cm
radiography and Attenuation aluminium
radioscopy thickness: Max. 45 mm
upply voltage(AC):
Max. 500 V
10 mA
Phantom thickness:
Max. 20 cm
Medical electrical Attenuation aluminium
equipment - Part 2-54: thickness: Max. 45 mm
Particular requirements Measuring tube
IEC 60601-2- Medical for the basic safety and voltage: (40 to 150) kV SF-1 N
54:2022(Ed.2.0) devices essential performace of Measuring tube
X-ray equipment for current: (0.1 to 1 500)
radiography and mA
radioscopy Measuring radiation
dosage:0.1 uR to 2.4
kR
time: 1 ms to 999 s
Measuring luminance :
1 500 lx
Medical electrical
IEC 60601-2- Medical particular requirements Max. 500 V SF-1 N
5:2000 devices for the safety of Sound energy: Max.
ultrasonic physiotherapy 100 mW/cm²
equipment
166/433
No. KT393

Supply voltage(AC):
Max. 500 V
Dielectric strength:
Medical electrical Max. 5 kV
Particular requirements Leakage current: Max.
IEC 60601-2- Medical 0.5 mA Temperature:
5:2009 for the basic safety and Max. 200 °C SF-1 N
devices
(Ed. 3.0) essential performance of Unwanted ultrasonic
ultrasonic physiotherapy radiation: Max. 100
equipment mW/cm²
Effective intensity:
Max. 3 W/cm²
Medical electrical
for the basic safety
IEC 60601-2- Medical Dielectric strength:
and essential SF-1 N
62:2013 (Ed.1.0) devices Max. 5 kV
performance of high Leakage current: Max.
intensity therapeutic 1 mA
ultrasound (HITU)
equipment

IEC 60601-2- Particular requirements Leakage current: Max.
Medical
63:2012+A1:2017 for the basic safety and 20 mA SF-1 N
devices
(1.1 edition) essential performance of Attenuation
dental extra-oral X-ray equivalent: Max. 1.2
equipment mm Al
Supply voltage(AC):
Max. 500 V
20 mA
Medical electrical
equipment - Part 2-63: Measuring tube
voltage: (40 to 150) kV
IEC 60601-2- Particular requirements Measuring tube
Medical
63:2012+AMD2:2 for the basic safety and current: (0.1 to 1 500) SF-1 N
devices
021 essential performance of mA
dental extra-oral X-ray Measuring radiation
equipment dosage: 0.1 uR to 2.4
kR
time: 1 ms to 999 s

65:2012+A1:2017 for the basic safety and SF-1 N
devices 20 mA
(1.1 edition) essential performance of Temperature: Max.
dental intra-oral X-ray 200 °C
equipment
167/433
No. KT393

Supply voltage(AC):
Max. 500 V
20 mA
Medical electrical
equipment - Part 2-65: Measuring tube
voltage: (40 to 150) kV
IEC 60601-2- Particular requirements Measuring tube
Medical
65:2012+AMD2:2 for the basic safety and current: (0.1 to 1 500) SF-1 N
devices
021 essential performance of mA
dental intra-oral X-ray Measuring radiation
equipment dosage:0.1 uR to 2.4
kR
time: 1 ms to 999 s

particular requirements Leakage current: Max.
IEC 60601-2- Medical for the safety of high- 20 mA Temperature: SF-1 N
7:1998 devices voltage generators of Max. 200 °C
diagnostic X-ray Phantom thickness:
generators Max. 20 츠
Medical devices -
IEC 62366:2007 Medical Application of usability - SF-1 N
(Ed.1.0) devices engineering to medical
devices
Medical devices -
IEC Medical Application of usability
62366:2007+A1:2 - SF-1 N
devices engineering to medical
014 (Ed.1.1) devices
Medical electrical
IEC 80601-2- Particular requirements Pressure: Max. 300
Medical
30:2009 for the basic safety and mmHg SF-1 N
devices
+A1:2013(ed.1.1) essential performance of
automated non-invasive
sphygmomanometers
Pressure: Max. 300

mmHg
Medical electrical
Max. 500 V
Particular requirements Dielectric strength:
IEC 80601-2- Medical for the basic safety and Max. 5 kV SF-1 N
30:2018(Ed.2.0) devices essential performance of Leakage current: Max.
automated non-invasive 10 mA
sphygmomanometers Temperature: Max.
200 °C
Supply voltage(AC):
IEC 80601-2- Medical Particular requirements 10 mA
60:2012 SF-1 N
devices for the basic safety and Dielectric strength:
(1st edition) essential performance of Max. 500 V
dental equipment Temperature: Max.
200 °C
168/433
No. KT393

Supply voltage(AC):
IEC80601-2- Medical Particular requirements 10 mA
49:2018 SF-1 N
devices for the safety of Dielectric strength:
(Ed.1.0) multifunction patient Max. 5 kV
monitoring equipment Sound pressure: Max.
85 dB(A)
Supply voltage(AC):
IEC80601-2- Medical Particular requirements 10 mA
60:2019 SF-1 N
devices for the basic safety and Dielectric strength:
(Ed. 2.0) essential performance of Max. 500 V
dental equipment Temperature: Max.
200 °C
Medical electrical
Particular requirements Supply voltage(AC):
ISO 80601-2- Medical for basic safety and Max. 500 V SF-1 N
56:2017 (Ed.2.0) devices essential performance of Temperature: Max.
clinical thermometers 200 °C
for body temperature
measurement
Medical electrical
essential performance of Peak acceleration:
pulse oximeter Max. 1 000 m/s²
equipment Acceleration
ISO 80601-2- Medical [Exception] amplitude: Max. 5.0 SF-1 N
61:2017 (Ed.2.0) devices 201.12.1.101.2 * Data (m/s²)²/Hz
collection for Drop height: Max. 0.25
determination of SpO2 m
ACCURACY
201.12.1.101.3 * Data
analysis for
determination of SpO2
ACCURACY
169/433
No. KT393

03.011 EMC (Electromagnetic Compatibility)

E10 Test Specification
for Type Approval
NO.13 Electrostatic ESD: ±8 kV
discharge RS: 80 MHz ∼ 6 GHz,
NO.14 Electromagnetic 10 V/m
field LFCS: <12 kHz, 3 V
NO.15 Conducted low r.m.s. , max. 2 W
Electrical Frequency CS: 150 kHz ∼ 80
IACS Req. materials and NO.16 Conducted Radio MHz, 3 Vr.m.s. & Spot SF-3 N
1991/Rev.8 2021 components Frequency 10
NO.17 Electrical Fast Vr.m.s.
Transients / Burst EFT: ±2 kV
NO.18 Surge Surge: ±1 kV
NO.19 Radiated RE: 150 kHz ∼ 6 GHz
Emission CE: 10 kHz ∼ 30 MHz
NO.20 Conducted
Emission

for Type Approval
NO.13 Electrostatic
discharge
NO.14 Electromagnetic ESD: ±8 kV
field RS: 80 MHz ∼ 6 GHz,
NO.15 Conducted low 10 V/m
IACS Req. materials and NO.16 Conducted Radio MHz, 3 Vr.m.s. & Spot BS N
1991/Rev.8 2021 components Frequency 10 Vr.m.s.
NO.17 Electrical Fast EFT: ±2 kV
Transients / Burst Surge: ±1 kV
NO.18 Surge CE: 10 kHz ∼ 30 MHz
NO.19 Radiated
Emission
NO.20 Conducted
Emission

for Type Approval
NO.13 Electrostatic
discharge
NO.14 Electromagnetic
field
NO.15 Conducted low
Electrical Frequency
materials and NO.16 Conducted Radio CE: 10 kHz ∼ 30 MHz
IACS Req. SF-2 N
RE: 150 kHz ∼ 6 GHz
1991/Rev.8 2021 components Frequency
NO.17 Electrical Fast
Transients / Burst
NO.18 Surge
NO.19 Radiated
Emission
NO.20 Conducted
Emission
170/433
No. KT393

for Type Approval
NO.13 Electrostatic
discharge ESD: ±8 kV
NO.14 Electromagnetic RS: 80 MHz ∼ 6 GHz,
field 10 V/m
NO.15 Conducted low CS: 150 kHz ∼ 80
Electrical Frequency MHz, 3 Vr.m.s. & Spot
IACS Req. materials and NO.16 Conducted Radio SF-1 N
10 Vr.m.s.
1991/Rev.8 2021 components Frequency EFT: ±2 kV
NO.17 Electrical Fast Surge: ±1 kV
Transients / Burst RE: 150 kHz ∼ 6 GHz
NO.19 Radiated
Emission
NO.20 Conducted
Emission
Electromagnetic
compatibility (EMC) -
Part 3-3: Limits -
Limitation of voltage
changes, voltage
Electrical
IEC 61000-3- and fluctuations and flicker Flicker: max 16 A
3:2013+A1:2017+ materials SF-3 N
in public low-voltage
components supply systems, for
A2:2021
equipment with rated
current ≤16 A per phase
and not subject to
conditional connection
Electromagnetic
Part 3-3: Limits -
changes, voltage
Electrical
A2:2021
and not subject to
Electromagnetic
Part 3-3: Limits -
changes, voltage
Electrical
A2:2021
and not subject to
171/433
No. KT393

Electromagnetic
Part 3-3: Limits -
changes, voltage
Electrical
3:2013+A1:2017+ materials BS N
A2:2021
and not subject to
EQ/TE 01 : (6 ∼ 16) V
EQ/TE 02 : (0 ∼ 14) V
EQ/TE 03 : (0 ∼ 14) V
EQ/TE 04 : (-14 ∼ 24)
V
EQ/TE 05 : 0 V, 14 V
EQ/IC 01 : ±100 V
EQ/IC 02 : (-150 ∼
+100) V
EQ/IC 03 : +21 V
EQ/IC 04 : 10 μs ∼ 300
ms
EQ/IC 05 : (3 ∼ 11) V
EQ/IC 06 : 50 Hz ∼ 50
NISSAN DESIGN kHz, 4 VP-P
SPECIFICATION - EMC EQ/IC 07 : (-150 ∼
Specifications of 100) V
Electrical Electrical and Electronic EQ/IC 08 : 100 kHz ∼
28401NDS02 materials and Parts 400 MHz, 200 mA BS N
[8]:2018 components [Exception] EQ/IC 10 : ±100 V
6.2.3 EQ/IC 09: EQ/IC 11 : ±400 V
Immunity to ignition EQ/IR 02 : (DC(0) ∼
high voltage 200) kHz, 180 dBμA/m
EQ/IR 03 : Max ±15 kV
EQ/IR 04 : Max ±25 kV
EQ/IR 04 bis : Max ±25
kV
EQ/MC 01 : ±200 V/μs,
±30 A/μs
EQ/MC 02 : 20 Hz ∼
5.9 MHz
EQ/MC 03 : 100 kHz ∼
108 MHz
EQ/MR 01 : 100 kHz ∼
5 905 MHz
EQ/MR 02 : 20 Hz ∼
200 kHz
172/433
No. KT393

EQ/IC 01 : ±100 V
EQ/IC 02 : (-150 ∼
+100) V
NISSAN DESIGN EQ/IC 03 : +21 V
SPECIFICATION - EMC EQ/IC 07 : (-150 ∼
Specifications of
Electrical and Electronic 100) V
Electrical
28401NDS02 EQ/MC 02 : 20 Hz ∼
materials and Parts SF-1 N
[8]:2018 5.9 MHz
components [Exception] EQ/MC 03 : 100 kHz ∼
6.2.3 EQ/IC 09: 108 MHz
Immunity to ignition EQ/MR 01 : 100 kHz ∼
high voltage 5 905 MHz
EQ/MR 02 : 20 Hz ∼
200 kHz
EQ/IR 01 : 200 MHz ∼

3.2 GHz, 400 V/m
NISSAN DESIGN EQ/IR 05 : (26 ∼ 2
SPECIFICATION - EMC 620) MHz, 17 W
Specifications of
Electrical and Electronic EQ/MC 02 : 20 Hz ∼
Electrical
28401NDS02 5.9 MHz
materials and Parts SF-2 N
[8]:2018 EQ/MC 03 : 100 kHz ∼
components [Exception] 108 MHz
9.2.3 EQ/IC 09: EQ/MR 01 : 100 kHz ∼
Immunity to ignition 5 905 MHz
high voltage EQ/MR 02 : 20 Hz ∼
200 kHz
RENAULT - RESISTANCE
TO ELECTRICAL EQ/IC 01 : ±100 V
DISTURBANCES EQ/IC 02 : (-150 ∼
AND +100) V
ELECTROMAGNETIC EQ/IC 03 : +21 V
COMPATIBILITY EQ/IC 07 : (-150 ∼
INSTRUCTIONS 100) V
Electrical
36-00-808/-- materials and CONCERNING EQ/MC 02 : 20 Hz ∼ SF-1 N
N:2016 components ELECTRICAL, 5.9 MHz
ELECTRONIC AND EQ/MC 03 : 100 kHz ∼
PYROTECHNIC 108 MHz
EQUIPMENT EQ/MR 01 : 100 kHz ∼
[Exception] 5 905 MHz
6.2.3 EQ/IC 09: EQ/MR 02 : 20 Hz ∼
Immunity to ignition 200 kHz
high voltage
173/433
No. KT393

RENAULT - RESISTANCE
TO ELECTRICAL
DISTURBANCES EQ/IR 01 : 200 MHz ∼
AND 3.2 GHz, 400 V/m
ELECTROMAGNETIC EQ/IR 05 : (26 ∼ 2
COMPATIBILITY 620) MHz, 17 W
INSTRUCTIONS EQ/MC 02 : 20 Hz ∼
Electrical
36-00-808/-- materials and CONCERNING 5.9 MHz SF-2 N
N:2016 components ELECTRICAL, EQ/MC 03 : 100 kHz ∼
ELECTRONIC AND 108 MHz
PYROTECHNIC EQ/MR 01 : 100 kHz ∼
EQUIPMENT 5 905 MHz
[Exception] EQ/MR 02 : 20 Hz ∼
6.2.3 EQ/IC 09: 200 kHz
Immunity to ignition
high voltage
EQ/TE 01 : (6 ∼ 16) V
EQ/TE 02 : (0 ∼ 14) V
EQ/TE 03 : (0 ∼ 14) V
EQ/TE 04 : (-14 ∼ 24)
V
EQ/TE 05 : 0 V, 14 V
EQ/IC 01 : ±100 V
EQ/IC 02 : (-150 ∼
+100) V
EQ/IC 03 : +21 V
RENAULT - RESISTANCE EQ/IC 04 : 10 μs ∼ 300
ms
TO ELECTRICAL EQ/IC 05 : (3 ∼ 11) V
DISTURBANCES EQ/IC 06 : 50 Hz ∼ 50
AND kHz, 4 VP-P
ELECTROMAGNETIC EQ/IC 07 : (-150 ∼
COMPATIBILITY 100) V
INSTRUCTIONS
Electrical EQ/IC 08 : 100 kHz ∼
36-00-808/-- materials and CONCERNING 400 MHz, 200 mA BS N
N:2016 components ELECTRICAL, EQ/IC 10 : ±100 V
ELECTRONIC AND EQ/IC 11 : ±400 V
PYROTECHNIC EQ/IR 02 : (DC(0) ∼
EQUIPMENT 200) kHz, 180 dBμA/m
[Exception] EQ/IR 03 : Max ±15 kV
6.2.3 EQ/IC 09: EQ/IR 04 : Max ±25 kV
Immunity to ignition EQ/IR 04 bis : Max ±25
high voltage kV
EQ/MC 01 : ±200 V/μs,
±30 A/μs
EQ/MC 02 : 20 Hz ∼
5.9 MHz
EQ/MC 03 : 100 kHz ∼
108 MHz
EQ/MR 01 : 100 kHz ∼
5 905 MHz
EQ/MR 02 : 20 Hz ∼
200 kHz
174/433
No. KT393

RE01 : 1 Hz ∼ 400
MHz
China Euro Vehicle RE02 : 9 kHz ∼ 30
Technology- MHz
Electromagnetic RE03 : 100 kHz ∼ 6
Electrical
8888621495:2018 materials and Compatibility GHz SF-2 N
components Specification CE02 : 500 kHz ∼ 320
SYSTEM & MHz
COMPONENT RI03 : 200 MHz ∼ 6
REQUIREMENTS GHz, 600 V/m
RI04 : 140 MHz ∼ 5
000 MHz, 25 W
RE01 : 1 Hz ∼ 400
China Euro Vehicle MHz
Technology- RE02 : 9 kHz ∼ 30
Electromagnetic MHz
Electrical
8888621495:2018 materials and Compatibility RE03 : 100 kHz ∼ 6 SF-1 N
components Specification GHz
SYSTEM & CE02 : 500 kHz ∼ 320
COMPONENT MHz
REQUIREMENTS CI01 : (-150 ∼ +100) V
CI02 : (-150 ∼ 100) V
RE01 : 1 Hz ∼ 400
MHz
RE02 : 9 kHz ∼ 30
MHz
RE03 : 100 kHz ∼ 6
China Euro Vehicle GHz
Technology- CE02 : 500 kHz ∼ 320
Electromagnetic
Electrical MHz
8888621495:2018 materials and Compatibility RI01 : (DC(0) ∼ 1) BS N
components Specification MHz, 3 000 μT
SYSTEM & RI02 : 100 kHz ∼ 400
COMPONENT MHz, 106 dBμA
REQUIREMENTS CE01 : -75 V, +50 V
CI01 : (-150 ∼ +100) V
CI02 : (-150 ∼ 100) V
ESD01 : Max ±8 kV
ESD02 : Max ±25 kV
American National
Standard for Methods of
Measurement of Radio-
Electrical
materials and Noise Emissions from RE: 9 kHz ∼ 1 GHz
ANSI C63.4:2014 SF-1 N
Low-Voltage Electrical CE: 9 kHz ∼ 30 MHz
components and Electronic
Equipment in the Range
of 9 kHz to 40 GHz
American National
Electrical
materials and Noise Emissions from RE: 9 kHz ∼ 40 GHz
ANSI C63.4:2014 SF-2 N
Low-Voltage Electrical CE: 9 kHz ∼ 30 MHz
components and Electronic
of 9 kHz to 40 GHz
175/433
No. KT393

American National
Electrical
materials and Noise Emissions from
ANSI C63.4:2014 CE: 9 kHz ∼ 30 MHz BS N
components and ElectronicElectrical
Low-Voltage

of 9 kHz to 40 GHz
Medical electrical CE: 150 kHz ∼ 30 MHz

equipment – Part 1-2: ESD: ±15 kV
General requirements RS: 80 MHz ∼ 6 GHz,
for basic 10 V/m
Electrical
ANSI/AAMI/IEC materials and safety and essential EFT: ±2 kV BS N
60601-1-2:2014 performance – Collateral Surge: ±2 kV
components Standard: CS: 150 kHz ∼ 80
Electromagnetic MHz, 10 V
disturbances – MF: 30 A/m
Requirements and tests V-DIP: max 100 %
Medical electrical
equipment – Part 1-2:
for basic
Electrical
ANSI/AAMI/IEC materials and safety and essential RE: 9 kHz ∼ 18 GHz SF-2 N
60601-1-2:2014 performance – Collateral CE: 9 kHz ∼ 30 MHz
components Standard:
Electromagnetic
disturbances –
Requirements and tests
RE: 30 MHz ∼ 6 GHz

for basic
Electrical 10 V/m
ANSI/AAMI/IEC materials and safety and essential EFT: ±2 kV SF-1 N
60601-1-2:2014 performance – Collateral
components Standard: Surge: ±2 kV
CS: 150 kHz ∼ 80

for basic
Electrical 10 V/m
ANSI/AAMI/IEC materials and safety and essential EFT: ±2 kV SF-3 N
60601-1-2:2014 performance – Collateral
components Standard: Surge: ±2 kV
CS: 150 kHz ∼ 80
176/433
No. KT393

Electromagnetic
compatibility (EMC)
Electrical
AS materials and –standards
Part 6-4: Generic BS N
61000.6.4:2020 CE : 9 kHz ∼ 30 MHz
components – Emission standard for
industrial environments
Electromagnetic
compatibility (EMC)
Electrical
Part 6-4: Generic RE : 9 kHz ∼ 6 GHz SF-1 N
61000.6.4:2020 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
61000.6.4:2020 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
61000.6.4:2020 CE : 9 kHz ∼ 30 MHz
Industrial, scientific and

medical equipment-
Radiofrequency
Electrical disturbance
AS CISPR 11:2017 materials and characteristic-Limits and CE: 9 kHz ~ 30 MHz BS N
components methods of
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
materials and characteristic-Limits and RE: 9 kHz ~ 6 GHz
AS CISPR 11:2017 SF-3 N
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method
177/433
No. KT393

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method
Electromagnetic
compatibility -
Electrical Requirements for
AS CISPR RE: 30 MHz ~ 1 GHz
materials and household appliances, SF-3 N
14.1:2018 components electric tools and similar CE: 150 kHz ~ 30 MHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
AS CISPR materials and household appliances, BS N
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Limit and methods of

measurement of radio
Electrical RE: 9 kHz ∼ 1 000
AS CISPR 15:2017 materials and disturbance MHz SF-3 N
components characteristics of
electrical lighting similar CE: 9 kHz ∼ 30 MHz
equipment

characteristics of
components electrical lighting similar CE: 9 kHz ∼ 30 MHz
equipment
178/433
No. KT393

equipment

Electrical
AS CISPR 15:2017 materials and disturbance BS N
components characteristics of CE: 9 kHz ∼ 30 MHz
electrical lighting similar
equipment
Electromagnetic
compatibility (EMC) –
Electrical
AS/NZS materials and Generic emission CE : 150 kHz ∼ 30 BS N
61000.6.3:2007 components Residential, commercial MHz
standard – Part 1:
and light industry
Electromagnetic
Electrical RE : 30 MHz ∼ 6 GHz
AS/NZS materials and Generic emission CE : 150 kHz ∼ 30 SF-1 N
61000.6.3:2007 standard – Part 1:
components Residential, commercial MHz
and light industry
Electromagnetic
61000.6.3:2007 components standard – Part 1:
Residential, commercial MHz
and light industry
Electromagnetic
61000.6.3:2007 standard – Part 1:
and light industry
Electromagnetic
and light industry
Electromagnetic
61000.6.3:2012 standard – Part 1:
and light industry
179/433
No. KT393

Electromagnetic
and light industry
Electromagnetic
Electrical
AS/NZS materials and Generic emission CE : 150 kHz ∼ 30 BS N
61000.6.3:2012 standard – Part 1:
and light industry
Electromagnetic
Electrical
AS/NZS materials and Part 6.4: Generic CE : 150 kHz ∼ 30 BS N
61000.6.4:2007 standards – Emission MHz
components standard for industrial
environments
Electromagnetic
AS/NZS materials and Part 6.4: Generic CE : 150 kHz ∼ 30 SF-1 N
61000.6.4:2007 standards – Emission
components standard for MHz
industrial
environments
Electromagnetic
industrial
environments
Electromagnetic
industrial
environments
Electromagnetic
industrial
environments
Electromagnetic
industrial
environments
180/433
No. KT393

Electromagnetic
industrial
environments
Electromagnetic
Electrical
AS/NZS materials and Part 6.4: Generic CE : 150 kHz ∼ 30 BS N
industrial
environments
Industrial scientific and

medical (ISM) radio-
frequency equipment –
Electrical
AS/NZS CISPR materials and Electromagnetic RE: 9 kHz ∼ 6 GHz SF-3 N
11:2011 components disturbance CE: 9 kHz ∼ 30 MHz
characteristics – Limits
and methods of
measurement

Electrical
AS/NZS CISPR materials and Electromagnetic BS N
and methods of
measurement

Electrical
and methods of
measurement

Electrical
and methods of
measurement
Electromganetic
Compatibility –
Electrical Requirements for RE: 30 MHz ∼ 1 GHz
AS/NZS CISPR materials and household appliances, CE : 150 kHz ∼ 30 SF-3 N
14.1:2010 components electric tools and similar MHz
apparatus – Part 1:
Emissions
181/433
No. KT393

Electromganetic
Compatibility –
Emissions
Electromganetic
Compatibility –
Emissions
Electromganetic
Compatibility –
AS/NZS CISPR materials and household appliances, CE : 150 kHz ∼ 30 BS N
Emissions
Electromagnetic
Compatibility –
AS/NZS CISPR RE: 9 kHz ∼ 1 GHz
14.1:2013 components electric tools and similar CE: 9 kHz ∼ 30 MHz
Emissions
Electromagnetic
Compatibility –
Emissions
Electromagnetic
Compatibility –
Emissions
Electromagnetic
Compatibility –
AS/NZS CISPR materials and household appliances, CE: 9 kHz ∼ 30 MHz BS N
14.1:2013 components electric tools and similar
Emissions
182/433
No. KT393

Electromagnetic ESD: ±8 kV
compatibility - RS: 80 MHz ∼ 1 GHz,
Requirements for 3 V/m
Electrical
AS/NZS CISPR materials and household appliances, EFT: ±1 kV BS N
14.2:2013 components apparatus and similar
electric tools SURGE: ±2 kV
CS: 150 kHz ∼ 230
- Part 2: Immunity - MHz, 3 V
Product family standard V-DIP: max 100 %
Electrical
AS/NZS CISPR materials and household appliances, EFT: ±1 kV SF-3 N
CS: 150 kHz ∼ 230
Electrical
CS: 150 kHz ∼ 230
Electrical
CS: 150 kHz ∼ 230
Electrical
AS/NZS CISPR materials and household appliances, EFT: ±1 kV BS N
CS: 150 kHz ∼ 230
Electrical
CS: 150 kHz ∼ 230
Limits and methods of

Electrical
AS/NZS CISPR materials and disturbance BS N
15:2011 components characteristics of CE: 9 kHz ∼ 30 MHz
electrical lighting and
similar equipment
183/433
No. KT393

Electrical
AS/NZS CISPR materials and disturbance RE: 9 kHz ∼ 300 MHz SF-1 N
similar equipment

Electrical
similar equipment

Electrical
similar equipment
Electromagnetic
Electrical
AS/NZS CISPR compatibility of RE: 30 MHz ∼ 6 GHz
32:2013 multimedia equipment – CE: 150 kHz ∼ 30 MHz
components Emission requirements
Electromagnetic
Electrical
Electromagnetic
Electrical
Electromagnetic
Electrical
AS/NZS CISPR compatibility of
materials and BS N
Electromagnetic
Electrical
AS/NZS CISPR compatibility of
materials and BS N
Electromagnetic
Electrical
Electromagnetic
Electrical
Electromagnetic
Electrical
184/433
No. KT393

GROUPE PSA EQ/IR 01 : (200 ∼ 800)
ENVIRONMENT MHz, 200 V/m
SPECIFICATIONS FOR EQ/IR 05 : (450 ∼ 5
ELECTRICAL AND 725) MHz, 13.4 W
ELECTRONIC EQ/MC 02 : 20 Hz ∼
EQUIPMENTS 20 kHz
ELECTRICAL EQ/MC 03 : 100 kHz ∼
CHARACTERISTICS 108 MHz
Electrical
materials and [Exception] EQ/MC 03 BIS : (76 ∼
B21 7110:2019 SF-2 N
components 7.2.4 EQ/IC 09: 245) MHz
IMMUNITY TO IGNITION EQ/MC 04 : 100 kHz ∼
VOLTAGE 245 MHz
7.2.6 EQ/IR 06: EQ/MR 01 : 150 kHz ∼
IMMUNITY TO 5 925 MHz
RADIATED ELECTRIC EQ/MR 02 : 1 Hz ∼ 6
FIELD IN GHz
REVERBERATION EQ/MR 03 : 150 kHz ∼
CHAMBER 30 MHz
EQ/IC 01 : ±100 V
GROUPE PSA EQ/IC 02 : (-150 ∼
ENVIRONMENT +100) V
SPECIFICATIONS FOR EQ/IC 03 : +27 V
ELECTRICAL AND EQ/IC 07 : (-150 ∼
ELECTRONIC 100) V
EQUIPMENTS EQ/MC 02 : 20 Hz ∼
ELECTRICAL 20 kHz
CHARACTERISTICS EQ/MC 03 : 100 kHz ∼
Electrical
materials and [Exception] 108 MHz
B21 7110:2019 SF-1 N
components 7.2.4 EQ/IC 09: EQ/MC 03 BIS : (76 ∼
IMMUNITY TO IGNITION 245) MHz
VOLTAGE EQ/MC 04 : 100 kHz ∼
7.2.6 EQ/IR 06: 245 MHz
IMMUNITY TO EQ/MR 01 : 150 kHz ∼
RADIATED ELECTRIC 5 925 MHz
FIELD IN EQ/MR 02 : 1 Hz ∼ 6
REVERBERATION GHz
CHAMBER EQ/MR 03 : 150 kHz ∼
30 MHz
185/433
No. KT393

EQ/TE 01 : (8 ∼ 16) V
EQ/TE 02 : (0 ∼ 16) V
EQ/TE 03 : (0 ∼ 14) V
EQ/TE 04 : (-14 ∼ 24)
V
EQ/TE 05 : 0 V, 16 V
EQ/TE 07 : 19 V
EQ/TE 08 : (10.5 ∼ 16)
V
EQ/IC 01 : ±100 V
EQ/IC 02 : (-150 ∼
+100) V
EQ/IC 03 : +27 V
EQ/IC 04 : 2 μs ∼ 5 ms
EQ/IC 05 : (3 ∼ 14) V
GROUPE PSA EQ/IC 06 : 10 Hz ∼
ENVIRONMENT 200 kHz, 4 VP-P
SPECIFICATIONS FOR EQ/IC 07 : (-150 ∼
ELECTRICAL AND 100) V
ELECTRONIC EQ/IC 08 : 100 kHz ∼
EQUIPMENTS 400 MHz, 200 mA
ELECTRICAL EQ/IC 10 : A1, A2-1,
CHARACTERISTICS A2-2
Electrical [Exception] EQ/IC 12 : (7.6 ∼ 14) V
B21 7110:2019 materials and 7.2.4 EQ/IC 09: BS N
components IMMUNITY TO IGNITION EQ/IC 13 : (15.2 ∼ 18)
V
VOLTAGE EQ/IC 14 : A2-1, A2-2
7.2.6 EQ/IR 06: EQ/IR 01 : (200 ∼ 800)
IMMUNITY TO MHz, 200 V/m
RADIATED ELECTRIC EQ/IR 02 : DC(0) ∼
FIELD IN 150) kHz, 180 dBμA/m
REVERBERATION EQ/IR 03 : Max ±15 kV
CHAMBER EQ/IR 04 : Max ±25 kV
EQ/MC 01 : ±80 V
EQ/MC 02 : 20 Hz ∼
20 kHz
EQ/MC 03 : 100 kHz ∼
108 MHz
EQ/MC 03 BIS : (76 ∼
245) MHz
EQ/MC 04 : 100 kHz ∼
245 MHz
EQ/MR 01 : 150 kHz ∼
5 925 MHz
EQ/MR 02 : 1 Hz ∼ 6
GHz
EQ/MR 03 : 150 kHz ∼
30 MHz
Electromagnetic
compatibility —
Electrical
BS EN 12015:2014 materials and Product family standard BS N
components moving walks — and CE: 150 kHz ∼ 30 MHz
for lifts, escalators
Emission
186/433
No. KT393

Electromagnetic
compatibility —
Electrical
BS EN 12015:2014 materials and Product family standard RE: 30 MHz ∼ 1 GHz SF-1 N
Emission
Electromagnetic
compatibility —
Electrical
Emission
Electromagnetic
compatibility —
Electrical
Emission

compatibility - EFT: ±4 kV
Electrical
BS EN 12016:2013 materials and Product family standard Surge: ±2.5 kV BS N
for lifts, escalators and CS: 150 kHz ∼ 80 MHz
components moving walks – 10 V
Immunity V-DIP: max 100 %

Electrical
BS EN 12016:2013 materials and Product family standard Surge: ±2.5 kV SF-1 N
components moving walks – 10 V
ESD: ±15 kV
RS: 80 MHz ~ 166 MHz
10 V/m
166 MHz ~ 1,000
MHz 30 V/m
1,429 MHz ~ 1,516
Electromagnetic MHz 30 V/m
compatibility - 1,710 MHz ~ 1,785
Electrical Product family standard MHz 30 V/m
BS EN 12016:2013 materials and for lifts, escalators and SF-3 N
1,840 MHz ~ 2,170
components moving walks – MHz 10 V/m
Immunity 2,300 MHz ~ 2,655
MHz 10 V/m
EFT: ±4 kV
Surge: ±2.5 kV
CS: 150 kHz ∼ 80 MHz
10 V
V-DIP: max 100 %
187/433
No. KT393

RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±8 kV
Railway applications – RS: 80 MHz ~ 2.5 GHz
Electrical
BS EN 50121- Electromagnetic 20 V/m
1:2017 compatibility – Part 1: EFT: ±2 kV
components General Surge: ±2 kV
CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
RE: 9 kHz ~ 6 GHz

CE: 9 kHz ~ 30 MHz
ESD: ±8 kV
RS: 80 MHz ~ 2.5 GHz
Railway applications – 20 V/m
Electrical
BS EN 50121- Electromagnetic EFT: ±2 kV
1:2017 compatibility – Part 1: Surge: ±2 kV
components General CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
M/F: 300 A/m
PULSE M/F: 300 A/m
Railway applications –
Electrical
BS EN 50121- Electromagnetic CE: 9 kHz ~ 30 MHz
1:2017 compatibility – Part 1: RE: 9 kHz ~ 6 GHz
components General
CE: 9 kHz ~ 30 MHz

ESD: ±8 kV
Electrical 20 V/m
BS EN 50121- Electromagnetic
materials and EFT: ±2 kV BS N
1:2017 compatibility – Part 1:
components Surge: ±2 kV
General CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
Electromagnetic
Electrical
BS EN 50121-3- materials and compatibility BS N
1:2017/A1:2019 components –– Part 3-1: Rolling stock CE: 9 kHz ∼ 30 MHz
Train and complete
vehicle
Electromagnetic
Electrical
BS EN 50121-3- materials and compatibility RE: 9 kHz ∼ 1 GHz SF-1 N
Train and complete
vehicle
Electromagnetic
Electrical
Train and complete
vehicle
188/433
No. KT393

Electromagnetic
Electrical
Train and complete
vehicle
ESD: ±8 kV
RS: 80 MHz ∼ 3 GHz,
Electrical Electromagnetic
BS EN 50121-3- EFT: ±1 kV
materials and compatibility BS N
2:2016/A1:2019 SURGE: ±2 kV
components – Part 3-2: Rolling stock CS: 150 kHz ∼ 80
– Apparatus MHz, 3 V
V-DIP: max 100 %
ESD: ±8 kV
Electrical Electromagnetic EFT: ±1 kV
BS EN 50121-3- materials and compatibility SURGE: ±2 kV SF-1 N
2:2016/A1:2019 components – Part 3-2: Rolling stock CS: 150 kHz ∼ 80
V-DIP: max 100 %
MF : 30 A/m
ESD: ±8 kV
BS EN 50121-3- EFT: ±1 kV
materials and compatibility SF-3 N
2:2016/A1:2019 SURGE: ±2 kV
V-DIP: max 100 %

Railway applications – CE: 150 kHz ∼ 30 MHz
compatibility
Electrical EFT: ±2 kV
BS EN 50121- materials and –immunity
Part 4: Emission and SURGE: ±2 kV SF-1 N
4:2016/A1:2019 components signalling of the CS: 150 kHz ∼ 80
and MHz, 10 V
telecommunications V-DIP: max 100 %
apparatus M/F: 300 A/m
Electromagnetic
compatibility
Electrical
Part 4: Emission and CE: 150 kHz ∼ 30 MHz SF-2 N
4:2016/A1:2019 components signalling of the RE: 30 MHz ∼ 1 GHz
and
telecommunications
apparatus
189/433
No. KT393

compatibility
Part 4: Emission and SURGE: ±2 kV BS N
and MHz, 10 V
apparatus

compatibility RS: 80 MHz ∼ 6 GHz,
Electrical
Part 4: Emission and 20 V/m SF-3 N
4:2016/A1:2019 components signalling of the EFT: ±2 kV
and SURGE: ±2 kV
telecommunications CS: 150 kHz ∼ 80
apparatus MHz, 10 V
V-DIP: max 100 %
Electromagnetic
Electrical compatibility
BS EN 50121- CE: 150 kHz ∼ 30 MHz
materials and – Part 5: Emission and SF-2 N
5:2017/A1:2019 components immunity of fixed power RE: 30 MHz ∼ 1 GHz
supply installations and
apparatus

CE: 150 kHz ∼ 30 MHz
Railway applications – ESD: ±8 kV
Electromagnetic RS: 80 MHz ∼ 6 GHz,
BS EN 50121- 20 V/m
5:2017/A1:2019 components immunity of fixed power EFT: ±2 kV
supply installations and CS: 150 ±2
SURGE: kV
kHz ∼ 80
apparatus MHz, 10 V
V-DIP: max 100 %

Electrical compatibility EFT: ±2 kV
BS EN 50121- materials and – Part 5: Emission and SURGE: ±2 kV SF-1 N
5:2017/A1:2019 components immunity of fixed power CS: 150 kHz ∼ 80
supply installations and MHz, 10 V
apparatus V-DIP: max 100 %
M/F: 300 A/m

BS EN 50121- materials and – Part 5: Emission and SURGE: ±2 kV BS N
190/433
No. KT393

Alarm systems - Part 4:
compatibility – Product RS: 80 MHz ~ 2.7 GHz
family standard: 10 V/m
Electrical
BS EN 50130- materials and Immunity EFT: ±2 kV SF-3 N
4:2011/A1:2014 components requirements for Surge: ±2 kV
components of fire, CS: 150 kHz ~ 100
intruder, hold up, CCTV, MHz 10 V
access control and social V-DIP: max 100 %
alarm systems

Electrical
BS EN 50130- materials and Immunity EFT: ±2 kV SF-1 N
alarm systems

Electrical
BS EN 50130- materials and Immunity EFT: ±2 kV BS N
alarm systems
ESD: ±8 kV
10 V/m
EFT: ±1 kV
Electrical Railway applications- SURGE: ±2 kV
BS EN 50155:2017 materials and Rolling stock-Electronic SF-1 N
CS: 150 kHz ∼ 230
components equipment MHz, 3 V
V-DIP: max 100 %
MF : 30 A/m
Power supply test
ESD: ±8 kV
10 V/m
Electrical Railway applications- EFT: ±1 kV
BS EN 50155:2017 materials and Rolling stock-Electronic BS N
SURGE: ±2 kV
components equipment CS: 150 kHz ∼ 230
MHz, 3 V
V-DIP: max 100 %
191/433
No. KT393

ESD: ±8 kV
10 V/m
BS EN 50155:2017 materials and Rolling stock-Electronic SURGE: ±2 kV SF-3 N
MHz, 3 V
V-DIP: max 100 %
Power supply test
Electromagnetic CE: 150 kHz ~ 30 MHz

compatibility – Electrical ESD: ±8 kV
Electrical apparatus for the RS: 80 MHz ~ 2.7 GHz
BS EN 50270:2015 materials and detection and 10 V/m BS N
components measurement of EFT: ±2 kV
combustible gases, toxic Surge: ±2 kV
gases or oxygen CS: 150 kHz ~ 80
Electromagnetic
compatibility – Electrical
Electrical apparatus for the CE: 150 kHz ~ 30 MHz
BS EN 50270:2015 materials and detection and SF-2 N
RE: 30 MHz ~ 6 GHz
components measurement of
combustible gases, toxic
gases or oxygen
RE: 30 MHz ~ 6 GHz

CE: 150 kHz ~ 30 MHz
compatibility – Electrical RS: 80 MHz ~ 2.7 GHz
Electrical apparatus for the 10 V/m
BS EN 50270:2015 materials and detection and EFT: ±2 kV SF-1 N
components measurement of Surge: ±2 kV
combustible gases, toxic CS: 150 kHz ~ 80 MHz
gases or oxygen 10 V
V-DIP: max 100 %
M/F: 30 A/m
RE: 30 MHz ~ 6 GHz

Electromagnetic
compatibility – Electrical ESD: ±8 kV
BS EN 50270:2015 materials and detection and SF-3 N
EFT: ±2 kV
V-DIP: max 100 %

medical equipment-
Radiofrequency
BS EN Electrical disturbance
55011:2016+A11: materials and characteristic-Limits and RE: 9 kHz ~ 6 GHz SF-3 N
CE: 9 kHz ~ 30 MHz
2020 components methods of
measurement
[exception]
- 30 m test method
192/433
No. KT393

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
55011:2016+A11: materials and characteristic-Limits and CE: 9 kHz ~ 30 MHz BS N
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
55011:2016+A1:2 materials and characteristic-Limits and RE: 9 kHz ~ 6 GHz SF-3 N
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method
193/433
No. KT393

medical equipment-
Radiofrequency
55011:2016+A1:2 materials and characteristic-Limits and CE: 9 kHz ~ 30 MHz BS N
measurement
[exception]
- 30 m test method
Sound and television

broadcast receivers and
BS EN Electrical associated equipment -
55013:2013+A1:2 materials and Radio disturbance CE : 150 kHz ∼ 30 BS N
016 components characteristics - Limits MHz
and methods of
measurement

BS EN Electrical associated equipment - RE : 30 MHz ∼ 18 GHz
55013:2013+A1:2 materials and Radio disturbance CE : 150 kHz ∼ 30 SF-1 N
and methods of
measurement

and methods of
measurement

and methods of
measurement
Electromagnetic
compatibility -
BS EN 55014- RE: 30 MHz ~ 1 GHz
1:2017+A11:2020 components household
materials and appliances, SF-2 N
electric tools and similar CE: 150 kHz ~ 30 MHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
BS EN 55014- RE: 30 MHz ~ 1 GHz
apparatus
- Part 1: Emission
194/433
No. KT393

Electromagnetic
compatibility -
BS EN 55014- RE: 30 MHz ~ 1 GHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
BS EN 55014-
materials and appliances, BS N
apparatus
- Part 1: Emission
Electrical
BS EN 55014- materials and household appliances, EFT: ±1 kV BS N
2:2015 electric tools and similar SURGE: ±2 kV
components apparatus - Part 2: CS: 150 kHz ∼ 230
Immunity - Product MHz, 3 V
family standard V-DIP: max 100 %
Electrical
BS EN 55014- materials and household appliances, EFT: ±1 kV SF-1 N
Electrical
BS EN 55014- materials and household appliances, EFT: ±1 kV SF-3 N

broadcast receivers and ESD : ±8 kV
BS EN Electrical
55020:2007+A12: materials and associated equipment – S5 : 900 MHz 3 V/m SF-3 N
Immunity characteristics
2016 components – Limits and methods of EFT : ±1 kV
measurement

BS EN Electrical
55020:2007+A12: materials and associated equipment – S5 : 900 MHz 3 V/m SF-1 N
2016 components – Limits and methods of EFT : ±1 kV
measurement
195/433
No. KT393

BS EN Electrical
55020:2007+A12: materials and associated equipment – S5 : 900 MHz 3 V/m BS N
Immunity characteristics EFT : ±1 kV
2016 components – Limits and methods of S1, s2a, s2b, S3, S4
measurement
ESD: ±8 kV
Information technology RS: 80 MHz ∼ 1 GHz,
equipment – Immunity 3 V/m
BS EN Electrical
55024:2010+A1:2 materials and characteristics - Limit EFT: ±1 kV BS N
and SURGE: ±2 kV
015 components method of CS: 150 kHz ∼ 80
measurement MHz, 10V
M/F: 1 A/m

Information technology ESD: ±15 kV
RS: 80 MHz ~ 6 GHz,
equipment – Immunity
BS EN Electrical 10 V/m
55024:2010+A1:2 materials and characteristics - Limit EFT: ±2 kV SF-1 N
and
015 components method of Surge: ±2 kV
CS: 150 kHz ~ 80 MHz,
measurement 10 V
V-DIP: max 100 %
ESD: ±8 kV
equipment – Immunity 3 V/m
BS EN Electrical
55024:2010+A1:2 materials and characteristics - Limit EFT: ±1 kV SF-3 N
and SURGE: ±2 kV
015 components method of CS: 150 kHz ∼ 80
V-DIP: max 100 %
Electromagnetic
Electrical compatibility of
BS EN 55032:2015 materials and BS N
multimedia equipment – CE: 150 kHz ~ 30 MHz
Electromagnetic
Electrical compatibility of RE: 30 MHz ~ 6 GHz
BS EN 55032:2015 materials and SF-2 N
Electromagnetic
Electromagnetic
Electromagnetic
BS EN Electrical compatibility of RE: 30 MHz ∼ 6 GHz
55032:2015+A11: materials and SF-1 N
multimedia equipment CE: 150 kHz ∼ 30 MHz
2020 components –Emission requirements
196/433
No. KT393

Electromagnetic
Electromagnetic
Electromagnetic
BS EN Electrical compatibility of
55032:2015+A11: materials and BS N
ESD: ±8 kV
RS: 80 MHz ~ 5 GHz 3
Electromagnetic V/m
Electrical
BS EN 55035 : materials and multimedia equipment - EFT:
compatibility of ±1 kV SF-3 N
2017 components Immunity requirements CS: 150±2
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
Electromagnetic
BS EN 55035 : materials and compatibility of
equipment - Surge: ±2 kV SF-1 N
2017 components multimedia CS: 150 kHz ~ 80 MHz
Immunity requirements 3 V
MF : 1 A/m
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic V/m
Electrical
BS EN 55035 : materials and multimedia equipment - EFT:
compatibility of ±1 kV BS N
2017 components Immunity requirements CS: 150±2
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
Electromagnetic
BS EN 55035 : compatibility of
2017 + A11 : 2020 components multimedia equipment - Surge:
materials and ±2 kV SF-1 N
MF : 1 A/m
V-DIP: max 100 %
197/433
No. KT393

ESD: ±8 kV
Electromagnetic V/m
Electrical
BS EN 55035 : and multimedia equipment - EFT:
compatibility of ±1 kV
2017 + A11 : 2020 materials BS N
components Immunity requirements CS: 150±2
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic V/m
Electrical
BS EN 55035 : and multimedia equipment - EFT:
2017 + A11 : 2020 materials SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
Medical electrical CE: 150 kHz ~ 30 MHz

equipment –Part 1-2: ESD: ±15 kV
General requirements RS: 80 MHz ~ 6 GHz,
Electrical for basic safety and 10 V/m
BS EN 60601-1- materials and essential performance – EFT: ±1 kV BS N
2:2015 components Collateral Standard: Surge: ±2 kV
Electromagnetic CS: 150 kHz ~ 80 MHz,
disturbances – 10 V
RE: 30 MHz ~ 6 GHz

Electrical for basic safety and 10 V/m
BS EN 60601-1- materials and essential performance – EFT: ±1 kV SF-1 N
2:2015 components Collateral Standard: Surge: ±2 kV
Requirements and tests MF : 30 A/m
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

Electrical for basic safety and
BS EN 60601-1- 10 V/m
materials and essential performance – SF-3 N
2:2015 EFT: ±1 kV
components Collateral Standard: Surge: ±2 kV
Medical electrical
equipment –Part 1-2:
Electrical for basic safety and
BS EN 60601-1- RE: 30 MHz ∼ 6 GHz
materials and essential performance – SF-2 N
2:2015 CE: 150 kHz ∼ 30 MHz
components Collateral Standard:
Electromagnetic
disturbances –
198/433
No. KT393

Limits – Limitation of
voltage changes,
voltage fluctuations and
Electrical flicker in public low-
BS EN 61000-3- materials and voltage supply systems, Flicker: max 16 A SF-3 N
3:2013+A2:2021 components for equipment with
rated current ≤16 A per
phase and not subject to
voltage changes,
voltage changes,
voltage changes,
BS EN 61000-3- materials and voltage supply systems, Flicker: max 16 A BS N
voltage changes,
3:2013/A1:2019 components for equipment with
voltage changes,
199/433
No. KT393

voltage changes,
voltage changes,
BS EN 61000-3- materials and voltage supply systems, Flicker: max 16 A BS N
Testing and
measurement
Electrical techniques -
BS EN 61000-4- materials and Voltage dips, short V-DIP: max 100 % SF-3 N
11:2004/A1:2017 components interruptions and
voltage variations
immunity tests
Testing and
measurement
BS EN 61000-4- materials and Voltage dips, short V-DIP: max 100 % BS N
voltage variations
immunity tests
Testing and
measurement
BS EN 61000-4- materials and Voltage dips, short V-DIP: max 100 % SF-1 N
voltage variations
immunity tests
Testing and
Electrical measurement
BS EN 61000-4- materials and techniques ESD: max ±30 kV SF-3 N
2:2009 components - Electrostatic discharge
immunity test
Testing and
BS EN 61000-4- materials and techniques ESD: max ±30 kV SF-1 N
immunity test
200/433
No. KT393

Testing and
BS EN 61000-4- materials and techniques ESD: max ±30 kV BS N
immunity test
Electromagnetic
Part 4-39: Testing and
Electrical measurement RF in close proximity
BS EN 61000-4- materials and techniques - Radiated immunity : SF-2 N
39:2017 components fields in close proximity - 9 kHz ~ 26MHz
Immunity test
[Exception]
*380MHz ~ 6 GHz
Testing and
measurement
Electrical RS: 80 MHz ~ 1 GHz,
BS EN 61000-4- materials and techniques – Radiated, 20 V/m BS N
3:2006+A2:2010 radio-frequency,
components electromagnetic field 1 GHz ~ 3 GHz 10 V/m
immunity test
Testing and
measurement
BS EN 61000-4- materials and techniques – Radiated, 20 V/m SF-1 N
immunity test
Testing and
measurement
BS EN 61000-4- materials and techniques – Radiated, 20 V/m SF-3 N
immunity test
Testing and
measurement
Electrical
BS EN 61000-4- materials and techniques EFT: max ±4 kV SF-3 N
4:2012 components –transient/burst
Electrical fast
immunity
test
Testing and
measurement
Electrical
BS EN 61000-4- materials and techniques EFT: max ±4 kV BS N
Electrical fast
immunity
test
Testing and
measurement
Electrical
BS EN 61000-4- materials and techniques EFT: max ±4 kV SF-1 N
Electrical fast
immunity
test
201/433
No. KT393

Electromagnetic
compatibility (EMC)
Electrical
BS EN 61000-4- materials and –Part 4-5: Testing and SURGE: max ±6 kV SF-3 N
5:2014+A1:2017 measurement
components techniques –Surge
immunity test
Electromagnetic
compatibility (EMC)
Electrical
BS EN 61000-4- materials and –Part 4-5: Testing and SURGE: max ±6 kV BS N
5:2014+A1:2017 measurement
immunity test
Testing and
measurement
Electrical techniques - Immunity
BS EN 61000-4- CS: 150 kHz ∼ 230
materials and to conducted SF-3 N
6:2014 MHz, 10 V
components disturbances,
induced by
radiofrequency fields
Testing and
measurement
BS EN 61000-4- CS: 150 kHz ∼ 230
materials and to conducted SF-1 N
6:2014 MHz, 10 V
induced by
Testing and
measurement
BS EN 61000-4- CS: 150 kHz ∼ 230
materials and to conducted BS N
6:2014 MHz, 10 V
induced by
Electromagnetic
compatibility (EMC) Part
Electrical 4-8: Testing and
BS EN 61000-4- materials and measurement MF: max 30 A/m SF-1 N
8:2010 components techniques - Power
frequency magnetic field
immunity test
Electromagnetic
compatibility (EMC)
– Part 6-3: Generic
Electrical
BS EN 61000-6- materials and standards BS N
3:2007+A1:2011 components –residential,
Emission standard for CE : 9 kHz ∼ 30 MHz
commercial
and light-industrial
environments
202/433
No. KT393

Electromagnetic
compatibility (EMC)
Electrical
BS EN 61000-6- materials and standards SF-1 N
commercial
environments
Electromagnetic
compatibility (EMC)
Electrical
BS EN 61000-6- materials and standards RE : 9 kHz ∼ 6 GHz SF-2 N
commercial
environments
Electromagnetic
compatibility (EMC)
Electrical
BS EN 61000-6- materials and standards RE : 9 kHz ∼ 6 GHz SF-3 N
commercial
environments
ESD: ±8 kV
Electrical Equipment for general V/m
BS EN 61547:2009 materials and lighting purposes – EMC EFT: ±1 kV BS N
components immunity requirements CS: 150±2
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
Electrical Equipment for general EFT: ±1 kV
BS EN 61547:2009 materials and lighting purposes – EMC Surge: ±2 kV SF-1 N
components immunity requirements CS: 150 kHz ~ 80 MHz
3V
V-DIP: max 100 %
M/F: 1 A/m
ESD: ±8 kV
BS EN 61547:2009 materials and lighting purposes – EMC EFT: ±1 kV SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
203/433
No. KT393

BS EN IEC Electrical
55015:2019 + materials and disturbance BS N
A11:2020 electrical lighting similar
equipment

BS EN IEC Electrical RE: 9 kHz ∼ 1 000
55015:2019 + materials and disturbance MHz SF-1 N
characteristics of
A11:2020 components electrical lighting similar CE: 9 kHz ∼ 30 MHz
equipment

A11:2020 electrical lighting similar CE: 9 kHz ∼ 30 MHz
equipment

characteristics of
equipment
Limits for harmonic

Electrical current emission
BS EN IEC 61000- materials and (equipment input SF-3 N
3-2_2019 Harmonic: max 16A
components current ≤ 16 A per
phase)
Limits for harmonic

BS EN IEC 61000- materials and (equipment input Harmonic: max 16A SF-2 N
3-2_2019 components current ≤ 16 A per
phase)
Limits for harmonic

BS EN IEC 61000- materials and (equipment input Harmonic: max 16A SF-1 N
3-2_2019 components current ≤ 16 A per
phase)
Testing and
measurement
techniques - Voltage
Electrical dips, short interruptions
BS EN IEC 61000- materials and and voltage variations V-DIP: max 100 % SF-3 N
4-11:2020 components immunity tests for
equipment with input
current up to 16 A per
phase
204/433
No. KT393

Testing and
measurement
BS EN IEC 61000- materials and and voltage variations V-DIP: max 100 % SF-1 N
phase
Testing and
measurement
BS EN IEC 61000- materials and and voltage variations V-DIP: max 100 % BS N
phase
ESD: ±8 kV
compatibility(EMC)-Part 3 V/m
Electrical 6-1: Generic standards-
BS EN IEC 61000- EFT: ±1 kV
materials and Immunity standard for SF-3 N
6-1 : 2019 SURGE: ±2 kV
components residential, commercial CS: 150 kHz ∼ 80
light-industrial MHz, 3 V
environments V-DIP: max 100 %
ESD: ±8 kV
Electrical 6-1: Generic standards- EFT: ±1 kV
BS EN IEC 61000- materials and Immunity standard for SURGE: ±2 kV SF-1 N
6-1 : 2019 components residential, commercial CS: 150 kHz ∼ 80
environments M/F: 3 A/m
V-DIP: max 100 %
ESD: ±8 kV
BS EN IEC 61000- materials and Immunity standard for SURGE: ±2 kV BS N
6-1 : 2019 components residential, commercial CS: 150 kHz ∼ 80
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic
Electrical
BS EN IEC 61000- EFT: ±1 kV
materials and 6-2: Generic standards- SURGE: SF-3 N
6-2 : 2019 components Immunity for industrial CS: 150 ±2 kV
kHz ∼ 80
environments MHz, 10 V
V-DIP: max 100 %
205/433
No. KT393

ESD: ±8 kV
Electromagnetic 3 V/m
Electrical compatibility(EMC)-Part EFT: ±1 kV
BS EN IEC 61000- materials and 6-2: Generic standards- SURGE: ±2 kV SF-1 N
6-2 : 2019 components Immunity for industrial CS: 150 kHz ∼ 80
M/F: 30 A/m
V-DIP: max 100 %
ESD: ±8 kV
BS EN IEC 61000- materials and 6-2: Generic standards- SURGE: ±2 kV BS N
6-2 : 2019 components Immunity for industrial CS: 150 kHz ∼ 80
M/F: 3 A/m
V-DIP: max 100 %
Electromagnetic
compatibility (EMC)
Electrical
BS EN IEC 61000- materials and –standards
6-4:2019 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
6-4:2019 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
6-4:2019 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
6-4:2019 CE : 9 kHz ∼ 30 MHz

Electrical equipment for ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Electrical 10 V/m
BS EN IEC 61326- materials and and laboratory use –
requirements – Part EFT: ±2 kV BS N
1:2021 EMC
components 1 : General Surge: ±2 kV
requirements 10 V
V-DIP: max 100 %
206/433
No. KT393

Electrical equipment for
Electrical
BS EN IEC 61326- materials and and laboratory use – RE: 30 MHz ~ 6 GHz SF-2 N
1:2021 EMC requirements – Part CE: 150 kHz ~ 30 MHz
components 1 : General
requirements
RE: 30 MHz ~ 6 GHz

RS: 80 MHz ~ 6 GHz
Electrical 10 V/m
BS EN IEC 61326- materials and and laboratory use –
requirements – Part EFT: ±2 kV SF-1 N
1:2021 EMC
requirements 10 V
V-DIP: max 100 %
M/F: 30 A/m
RE: 30 MHz ~ 6 GHz

measurement, control RS: 80 MHz ~ 6 GHz
Electrical
BS EN IEC 61326- materials and EMC requirements – Part 10
and laboratory use – V/m SF-3 N
1:2021 EFT: ±2 kV
requirements CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %

and laboratory use –
Electrical 10 V/m
BS EN IEC 61326- materials and EMC requirements – EFT: ±2 kV BS N
2-6:2021 Part 2-6: Particular
components requirements Surge: ±2 kV
- In vitro CS: 150 kHz ~ 80 MHz
diagnostic (IVD) medical 10 V
equipment V-DIP: max 100 %

Electrical
BS EN IEC 61326- materials and EMC requirements – RE: 30 MHz ~ 6 GHz SF-2 N
2-6:2021 Part 2-6: Particular CE: 150 kHz ~ 30 MHz
components requirements - In vitro
equipment
RE: 30 MHz ~ 6 GHz

Electrical equipment for CE: 150 kHz ~ 30 MHz
ESD: ±15 kV
Electrical 10 V/m
BS EN IEC 61326- materials and EMC requirements – EFT: ±2 kV SF-1 N
2-6:2021 Part 2-6: Particular
- In vitro
diagnostic (IVD) medical CS: 150 kHz ~ 80 MHz
10 V
M/F: 30 A/m
207/433
No. KT393

RE: 30 MHz ~ 6 GHz
measurement, control ESD: ±15 kV
and laboratory use – RS: 80 MHz ~ 6 GHz
Electrical
BS EN IEC 61326- materials and EMC requirements – 10 V/m SF-3 N
2-6:2021 Part 2-6: Particular EFT: ±2 kV
components requirements - In vitro Surge: ±2 kV
equipment 10 V
V-DIP: max 100 %
Electromagnetic
Electrical
CAN/CSA-CISPR compatibility of
materials and BS N
32:17 multimedia equipment – CE: 150 kHz ~ 30 MHz
Electromagnetic
Electrical
CAN/CSA-CISPR compatibility of RE: 30 MHz ~ 6 GHz
Electromagnetic
Electrical
Electromagnetic
Electrical

Electromagnetic
Electrical
CISPR and disturbance RE : 9 kHz ∼ 6 GHz
11:2009+A1:2010 materials SF-3 N
characteristics – Limits CE : 9 kHz ∼ 30 MHz
components and methods of
measurement
[Exception]
- 30 m test method

Electromagnetic
Electrical
measurement
[Exception]
- 30 m test method
208/433
No. KT393

Electromagnetic
Electrical
measurement
[Exception]
- 30 m test method

Electromagnetic
Electrical
CISPR and disturbance
11:2009+A1:2010 materials BS N
components characteristics – Limits CE : 9 kHz ∼ 30 MHz
and methods of
measurement
[Exception]
- 30 m test method

medical equipment-
Radiofrequency
CISPR
11:2015+A1:2016 components characteristic-Limits
materials and and CE: 9 kHz ~ 30 MHz BS N
methods of
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
CISPR and RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
methods of
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
methods of
measurement
[exception]
- 30 m test method
209/433
No. KT393

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
methods of
measurement
[exception]
- 30 m test method

medical equipment-
Radio-frequency
CISPR Electrical disturbance
11:2015+A1:2016 materials and characteristic-Limits and CE: 9 kHz ∼ 30 MHz BS N
+A2:2019 components methods of
measurement
[Exception]
- 30 m test method

medical equipment-
Radio-frequency
11:2015+A1:2016 materials and characteristic-Limits and RE: 9 kHz ∼ 6 GHz SF-1 N
measurement
[Exception]
- 30 m test method

medical equipment-
Radio-frequency
measurement
[Exception]
- 30 m test method

medical equipment-
Radio-frequency
measurement
[Exception]
- 30 m test method

Electrical associated equipment
CISPR
13:2009+A1:2015 components –characteristics
materials and Radio disturbance BS N
– Limits and methods of
measurement
210/433
No. KT393

CISPR RE: 9 kHz ∼ 1 GHz
materials and Radio disturbance SF-1 N
measurement

measurement

measurement
Electromagnetic
compatibility -
CISPR 14- Electrical Requirements for RE : 30 MHz ∼ 1 GHz
1:2005+A1:2008 materials and household appliances, CE : 150 kHz ∼ 30 SF-3 N
+A2:2011 components electric tools and similar MHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
CISPR 14- Electrical Requirements for
1:2005+A1:2008 materials and household appliances, CE : 150 kHz ∼ 30 BS N
apparatus
- Part 1: Emission
211/433
No. KT393

Electromagnetic
compatibility -
Electrical Requirements for RE : 30 MHz ∼ 1 GHz
CISPR 14- materials and household appliances, CE : 150 kHz ∼ 30 SF-3 N
1:2005/A2:2011 components electric tools and similar MHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
CISPR 14- materials and household appliances, CE : 150 kHz ∼ 30 BS N
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
CISPR 14-1:2016 materials and household appliances, CE : 150 kHz ∼ 30 BS N
components electric tools and similar MHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
CISPR 14-1:2016 materials and household appliances, CE : 150 kHz ∼ 30 SF-1 N
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
212/433
No. KT393

Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
CISPR 14-1:2020 materials and household appliances, BS N
components electric tools and similar CE: 150 kHz ~ 30 MHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
Electrical Requirements for RE: 30 MHz ~ 6 GHz
CISPR 14-1:2020 materials and household appliances, SF-1 N
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electrical
materials and household appliances, EFT: ±1 kV
CISPR 14-2:2015 BS N
components apparatus and similar
CS: 150 kHz ∼ 230
Electrical
CISPR 14-2:2015 SF-1 N
CS: 150 kHz ∼ 230
213/433
No. KT393

Electrical
CISPR 14-2:2015 SF-3 N
CS: 150 kHz ∼ 230
Electrical
CISPR 14-2:2020 BS N
CS: 150 kHz ∼ 230
Electrical
CISPR 14-2:2020 SF-3 N
CS: 150 kHz ∼ 230
Electrical
CISPR 14-2:2020 SF-1 N
CS: 150 kHz ∼ 230

Electrical
materials and disturbance RE: 9 kHz ∼ 30 MHz
CISPR 15-2018 BS N
characteristics of
equipment

CISPR 15-2018 materials and disturbance MHz SF-2 N
characteristics of
equipment

equipment
214/433
No. KT393

equipment

disturbance
characteristics of
Electrical
materials and electrical lighting and RE : 9 kHz ∼ 30 MHz
CISPR 15:2013 BS N
similar equipment CE : 9 kHz ∼ 30 MHz
components [Exception]
– 4.2 Insertion loss
– 7. Method of insertion
loss easurement

disturbance
characteristics of
Electrical
materials and electrical lighting and CE : 9 kHz ∼ 30 MHz
CISPR 15:2013 SF-2 N
similar equipment RE : 9 kHz ∼ 300 MHz
loss easurement

disturbance
characteristics of
Electrical
loss easurement

disturbance
characteristics of
Electrical
loss easurement
215/433
No. KT393

Amendment 1 -
Specification for radio
disturbance and
immunity measuring
Electrical apparatus and methods
CISPR 16-2- materials and - Part 2-1: Methods of CE: 9 kHz ~ 30 MHz BS N
1:2014+A1:2017 components measurement of
disturbances and
immunity - Conducted
disturbance
measurements
Amendment 1 -
disturbance and
immunity measuring
CISPR 16-2- materials and - Part 2-1: Methods of CE: 9 kHz ~ 30 MHz SF-1 N
disturbances and
disturbance
measurements
Amendment 1 -
disturbance and
immunity measuring
disturbances and
disturbance
measurements
Amendment 1 -
disturbance and
immunity measuring
disturbances and
disturbance
measurements

disturbance and
immunity measuring
apparatus and methods
Electrical
CISPR 16-2- materials and -measurement
Part 2-3: Methods of CE: 9 kHz ~ 30 MHz SF-2 N
3:2016+A1:2019 of
components disturbances and
immunity - Radiated
disturbance
measurements
216/433
No. KT393

disturbance and
immunity measuring
Electrical
Part 2-3: Methods of RE: 9 kHz ~ 18 GHz BS N
3:2016+A1:2019 of
immunity - Radiated
disturbance
measurements

disturbance and
immunity measuring
Electrical
3:2016+A1:2019 of
immunity - Radiated
disturbance
measurements

disturbance and
immunity measuring
Electrical
3:2016+A1:2019 of
immunity - Radiated
disturbance
measurements

broadcast receiver and ESD : ±8 kV
Electrical
CISPR and associated equipment - RS : 900 MHz
20:2006+A1:2013 materials BS N
Immunity characteristics EFT : ±1 kV
components - Limit and methods of S1, s2a, s2b, S3, S4
measurement

broadcast receiver and ESD: ±8 kV
Electrical
CISPR and associated equipment - RS: 80 MHz ∼ 1 GHz,
Immunity characteristics 3 V/m
components - Limit and methods of EFT: ±1 Kv
measurement

broadcast receiver and ESD: ±8 kV
Electrical
CISPR and associated equipment - RS: 80 MHz ∼ 1 GHz,
Immunity characteristics 3 V/m
components - Limit and methods of EFT: ±1 kV
measurement
217/433
No. KT393

ESD: ±8 kV
Information technology RS: 80 MHz ~ 1 GHz 3
V/m
Electrical equipment - Immunity
CISPR 24 EFT: ±1 kV
materials and characteristics - Limit SF-3 N
Ed.2.0:2010 Surge: ±2 kV
components and method of CS: 150 kHz ~ 80 MHz
measurement 3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
materials and characteristics - Limit BS N
Ed.2.0:2010 Surge: ±2 kV
measurement 3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
materials and characteristics - Limit SF-1 N
Ed.2.0:2010 Surge: ±2 kV
measurement 3V
V-DIP: max 100 %
ESD: ±8 kV
3 V/m
CISPR EFT: ±1 kV
24:2010+A1:2015 components characteristics
materials and - Limit BS N
SURGE: ±2 kV
and method of CS: 150 kHz ∼ 80
measurement MHz, 3 V
V-DIP: max 100 %
ESD: ±8 kV
Information technology 3 V/m
Electrical equipment - Immunity EFT: ±1 kV
CISPR materials and characteristics - Limit SURGE: ±2 kV SF-1 N
24:2010+A1:2015 components and method of CS: 150 kHz ∼ 80
M/F: 1 A/m
V-DIP: max 100 %
ESD: ±8 kV
Electrical equipment - Immunity EFT: ±1 kV
CISPR materials and characteristics - Limit SURGE: ±2 kV SF-3 N
24:2010+A1:2015 components and method of CS: 150 kHz ∼ 80
M/F: 1 A/m
V-DIP: max 100 %
218/433
No. KT393

Vehicles, boats and
internal combustion
engines – Radio
disturbance
and methods of
measurement for the
protection of on-board RE : 150 kHz ∼ 2.5
receivers GHz
[Exception]
Electrical CE(Voltage method)
materials and 5. Measurement of
CISPR 25:2016 :150 kHz ∼ 108 MHz SF-2 N
emissions received by an
components antenna on CE(Current Probe
the same Method) : 150 kHz ∼
vehicle 245 MHz
6.5 Radiated emissions
from
components/modules -
TEM cell methods
from
components/modules –
Stripline method
Vehicles, boats and

internal combustion
engines – Radio
disturbance
and methods of
measurement for the
receivers GHz
[Exception]
CISPR 25:2016 :150 kHz ∼ 108 MHz SF-1 N
vehicle 245 MHz
from
TEM cell methods
from
Stripline method
219/433
No. KT393

Vehicles, boats and
internal combustion
engines – Radio
disturbance
and methods of
measurement for the
receivers GHz
[Exception]
CISPR 25:2016 :150 kHz ∼ 108 MHz BS N
vehicle 245 MHz
from
TEM cell methods
from
Stripline method
Electromagnetic
compatibility of
CISPR 32:2012 materials and multimedia equipment – CE : 150 kHz ∼ 30 SF-3 N
components Emission requirements MHz
Electromagnetic
compatibility of
components MHz
Emission requirements
Electromagnetic
compatibility of
components Emission requirements MHz
Electromagnetic
Electrical compatibility of CE : 150 kHz ∼ 30
CISPR 32:2012 materials and BS N
multimedia equipment – MHz
Electromagnetic
CISPR 32:2015 materials and BS N
Electromagnetic
CISPR 32:2015 materials and SF-1 N
Electromagnetic
220/433
No. KT393

Electromagnetic
Electromagnetic
CISPR Electrical compatibility of RE: 30 MHz ∼ 6 GHz
32:2015+AMD1:2 materials and SF-1 N
multimedia equipment – CE: 150 kHz ∼ 30 MHz
019 CSV components Emission requirements
Electromagnetic
CISPR Electrical compatibility of
32:2015+AMD1:2 materials and multimedia equipment – CE: 150 kHz ∼ 30 MHz BS N
Electromagnetic
Electromagnetic
ESD: ±8 kV
Electromagnetic V/m
Electrical
materials and multimedia equipment - EFT:
CISPR 35 : 2016 SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
Electromagnetic
materials and compatibility of
CISPR 35 : 2016 equipment - Surge: ±2 kV SF-1 N
components multimedia CS: 150 kHz ~ 80 MHz
MF : 1 A/m
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic V/m
Electrical
CISPR 35 : 2016 BS N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
221/433
No. KT393

CE (Voltage on Supply
Lines) :
150 kHz ∼ 108 MHz
CHRYSLER/FIAT - CE (Current on all Lines
Electrical Electrical and EMC in Harness) : 10 kHz ∼
CS-11979:2010 materials and Performance SF-2 N
108 MHz
components Requirements - E/E RE : 150 kHz ∼ 2 690
Components MHz
ALSE : 200 MHz ∼ 3.2
GHz, 200 V/m
Lines) :
150 kHz ∼ 108 MHz
CE (Current on all Lines
in Harness) : 10 kHz ∼
108 MHz
CHRYSLER/FIAT - RE : 150 kHz ∼ 2 690
Electrical Electrical and EMC MHz
CS-11979:2010 materials and Performance SF-1 N
TI (Supply Lines) : (-150
components Requirements - E/E ∼ +100) V
Components TI (Coupling Clamp ) :
±200 V
TI (Direct Capacitive
Coupling ) : ±45 V
TI (LED Lighting Power
Lines ) : (-75 ∼ 60) V
222/433
No. KT393

Electrical System
Operating Environment
: (4.5 ∼ 16) V, (-40 ∼
155) ℃, < 5 mA, 50 Hz
∼ 25 kHz
Supply Voltage
Variations : (3.5 ~
13.5) V, (0.1 ~ 500) ms
Supply Over Voltage
and Reverse Voltage :
(-28 ∼ 24) V
Electrical System
Compatibility
Requirements : < 18 A,
> 1 MΩ, 500 Vrms
Lines) :
CHRYSLER/FIAT - 150 kHz ∼ 108 MHz
Electrical Electrical and EMC CE (Current on all Lines
CS-11979:2010 materials and Performance in Harness) : 10 kHz ∼ BS N
components Requirements - E/E 108 MHz
Components RE : 150 kHz ∼ 2 690
MHz
CTE : ±80 V
BCI : (1 ∼ 400) MHz,
109 dBμA
ALSE : 200 MHz ∼ 3.2
GHz, 200 V/m
MFI : 15 Hz ∼ 150 kHz,
170 A/m
TI (Supply Lines) : (-150
∼ +100) V
TI (Coupling Clamp ) :
±200 V
TI (Direct Capacitive
Coupling ) : ±45 V
TI (LED Lighting Power
Lines ) : (-75 ∼ 60) V
ESD : Max ±20 kV
SECTION 3
DNV GL ENVIRONMENTAL TYPE
Environmental test TEST SPECIFICATION
specification for Electrical 4. Electrical power
electrical, CE: 10 kHz ∼ 30 MHz
materials and supply failure test SF-2 N
electronic and RE: 150 kHz ∼ 2 GHz
components 5. Power supply
programmable variation tests
equipment and 14. Electromagnetic
systems:2016 compatibility(EMC)
223/433
No. KT393

PF: 0 % Total 5 min
P-Var.: vol. (-25 ∼
SECTION 3 +30) %, Freq. (-10 ∼
DNV GL ENVIRONMENTAL TYPE +10) %
Environmental test TEST SPECIFICATION EFT: ±2 kV
specification for Electrical 4. Electrical power Surge: ±1 kV
electrical, materials and supply failure test CS: 150 kHz ∼ 80 BS N
electronic and components 5. Power supply MHz, 3 Vr.m.s. & Spot
programmable variation tests 10 Vr.m.s.
equipment and 14. Electromagnetic RS: 80 MHz ∼ 2 GHz,
systems:2016 compatibility(EMC) 10 V/m
ESD: ±8 kV
PF: 0 % Total 5 min

P-Var.: vol. (-25 ∼
+30) %, Freq. (-10 ∼
SECTION 3
DNV GL ENVIRONMENTAL TYPE +10) %
Environmental test EFT: ±2 kV
TEST SPECIFICATION
specification for Surge: ±1 kV
Electrical 4. Electrical power
electrical, CS: 150 kHz ∼ 80
electronic and MHz, 3 Vr.m.s. & Spot
programmable 10 Vr.m.s.
variation tests
equipment and RS: 80 MHz ∼ 2 GHz,
14. Electromagnetic
systems:2016 10 V/m
compatibility(EMC) ESD: ±8 kV
PF: 0 % Total 5 min

P-Var.: vol. (-25 ∼
+30) %, Freq. (-10 ∼
+10) %
SECTION 3
DNV GL ENVIRONMENTAL TYPE LFCS: <12 kHz, 3 V
Environmental test r.m.s. , max. 2 W
TEST SPECIFICATION
specification for EFT: ±2 kV
Electrical 4. Electrical power
electrical, Surge: ±1 kV
electronic and CS: 150 kHz ∼ 80
programmable MHz, 3 Vr.m.s. & Spot
variation tests
equipment and 10 Vr.m.s.
14. Electromagnetic
systems:2016 RS: 80 MHz ∼ 2 GHz,
compatibility(EMC) 10 V/m
ESD: ±8 kV
224/433
No. KT393

Uniform provisions
concerning the approval
of vehicles with regard
to electromagnetic
compatibility
[Exception]
Annex 4 - Method of
measurement of
radiated broadband
electromagnetic
emissions form vehicles
Annex 5 - Method of
measurement of
radiated narrowband
electromagnetic
emissions from vehicles
Annex 6 - Method of
testing for immunity of
vehicles to
electromagnetic
radiation
Annex 9 - Appendix 1
800 mm Stripline testing
TEM cell Testing
Annex 11 Method(s) of
testing for emission of
harmonics generated on
AC power lines from
ECE R-10.06:2019 materials and vehicle 12 Method(s) of ALSE : 20 MHz ∼ 2 SF-2 N
components Annex GHz, 30 V/m
voltage changes,
flicker on AC power
lines from vehicle
radiofrequency
conducted disturbances
on AC or DC power lines
from vehicles
radiofrequency
on network and
telecommunication
access from vehicles
Annex 15 Method of
vehicles to electrical fast
transient/burst
disturbances conducted
along AC and DC power
lines
Annex 16 Method of
vehicles to surges
conducted along AC
225/433
No. KT393

and DC power lines
226/433
No. KT393

Uniform provisions
to electromagnetic
compatibility
[Exception]
Annex 4 - Method of
measurement of
radiated broadband
electromagnetic
Annex 5 - Method of
measurement of
radiated narrowband
electromagnetic
Annex 6 - Method of
vehicles to
electromagnetic
radiation
800 mm Stripline testing RE : 30 MHz ∼ 1 GHz
Annex 9 - Appendix 2 CTI : (-450 ~ +150) V
TEM cell Testing CE(AC, DC Power) :
Annex 11 Method(s) of (0.15 ∼ 30) MHz
testing for emission of CE(TEL) : (0.15 ∼ 30)
harmonics generated on MHz
AC power lines from
Electrical Harmonic Current
ECE R-10.06:2019 materials and vehicle Emission : up to 16 A SF-1 N
components Annex 12 Method(s) of Voltage Fluctuation
testing for emission of and Flicker : up to 16 A
voltage changes, Electrical Fast
voltage fluctuations and Transient/Burst : Max
flicker on AC power ±2 kV
lines from vehicle Surge Transient : Max
Annex 13 Method(s) of ±2 kV
radiofrequency
from vehicles
radiofrequency
on network and
telecommunication
Annex 15 Method of
transient/burst
lines
Annex 16 Method of
vehicles to surges
conducted along AC
227/433
No. KT393

and DC power lines
228/433
No. KT393

Uniform provisions
to electromagnetic
compatibility
[Exception]
Annex 4 - Method of
measurement of
radiated broadband
electromagnetic
Annex 5 - Method of
measurement of
radiated narrowband
electromagnetic
Annex 6 - Method of
vehicles to
electromagnetic
radiation
800 mm Stripline testing
TEM cell Testing
harmonics generated on RE : 30 MHz ∼ 1 GHz
AC power lines from
Electrical BCI : (20 ∼ 400) MHz,
ECE R-10.06:2019 materials and vehicle 60 mA BS N
components Annex 12 Method(s) of CTI : (-450 ~ +150) V
testing for emission of CTE : -450 V, +150 V
voltage changes,
flicker on AC power
lines from vehicle
radiofrequency
from vehicles
radiofrequency
on network and
telecommunication
Annex 15 Method of
transient/burst
lines
Annex 16 Method of
vehicles to surges
conducted along AC
229/433
No. KT393

and DC power lines
Uniform provisions RE : 30 MHz ∼ 1 GHz

concerning the approval ALSE : 80 MHz ∼ 2
Electrical for vehicle alarm GHz, 30 V/m
ECE R-97:2001 materials and systems (VAS) and of BCI : (20 ∼ 400) MHz, BS N
components motor vehicles with 60 mA
regard to their alarm CTI : (-450 ∼ +150) V
systems (AS) CTE : -450 V, +150 V
Uniform provisions
Electrical for vehicle alarm RE : 30 MHz ∼ 1 GHz
ECE R-97:2001 materials and systems (VAS) and of ALSE : 80 MHz ∼ 2 SF-2 N
components motor vehicles with GHz, 30 V/m
regard to their alarm
systems (AS)
Uniform provisions
Electrical for vehicle alarm RE : 30 MHz ∼ 1 GHz
ECE R-97:2001 materials and systems (VAS) and of SF-1 N
CTI : (-450 ∼ +150) V
components motor vehicles with
regard to their alarm
systems (AS)
Electromagnetic
compatibility —
Electrical family standard RE : 30 MHz ∼ 1 GHz
EN 12015:2004 materials and Product CE : 150 kHz ∼ 30 SF-2 N
components for lifts, escalators and MHz
moving walks —
Emission
Electromagnetic
compatibility —
for lifts, escalators and
components moving walks — MHz
Emission
Electromagnetic
compatibility —
components for lifts, escalators and MHz
moving walks —
Emission
Electromagnetic
compatibility —
Electrical
materials and Product family standard CE : 150 kHz ∼ 30
EN 12015:2004 BS N
components moving walks — and MHz
Emission
Electromagnetic
compatibility —
Electrical
materials and Product family standard RE: 30 MHz ∼ 1 GHz
EN 12015:2014 SF-1 N
Emission
230/433
No. KT393

Electromagnetic
compatibility —
Electrical
EN 12015:2014 SF-3 N
Emission
Electromagnetic
compatibility —
Electrical
materials and Product family standard
EN 12015:2014 BS N
Emission
Electromagnetic
compatibility —
Electrical
EN 12015:2014 SF-2 N
Emission
ESD: ±15 kV
10 V/m
166 MHz ~ 1,000
MHz 30 V/m
1,429 MHz ~ 1,516
Electromagnetic MHz 30 V/m
compatibility - 1,710 MHz ~ 1,785
Electrical Product family standard MHz 30 V/m
EN 12016:2013 materials and for lifts, escalators and SF-3 N
1,840 MHz ~ 2,170
components moving walks - MHz 10 V/m
Immunity 2,300 MHz ~ 2,655
MHz 10 V/m
EFT: ±4 kV
Surge: ±2.5 kV
10 V
V-DIP: max 100 %

Electrical
materials and Product family standard Surge: ±2.5 kV
EN 12016:2013 SF-1 N
components moving walks - 10 V

Electrical
materials and Product family standard Surge: ±2.5 kV
EN 12016:2013 BS N
components moving walks - 10 V
231/433
No. KT393

ESD: ±8 kV
Railway applications
Electrical 20 V/m
EN 50121- – Electromagnetic
1:2006/AC:2008 compatibility
– Part 1: General CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
Electrical
EN 50121- – Electromagnetic CE: 150 kHz ~ 30 MHz
1:2006/AC:2008 compatibility RE: 30 MHz ~ 6 GHz
components – Part 1: General
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
Railway applications RS: 80 MHz ~ 2.5 GHz
Electrical
EN 50121- – Electromagnetic 20 V/m
1:2006/AC:2008 compatibility EFT: ±2 kV
components – Part 1: General Surge: ±2 kV
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
Electrical
EN 50121- – Electromagnetic 20 V/m
1:2006/AC:2008 compatibility EFT: ±2 kV
10 V
V-DIP: max 100 %
CE: 9 kHz ~ 30 MHz

ESD: ±8 kV
Electrical 20 V/m
– Electromagnetic
EN 50121-1:2017 materials and EFT: ±2 kV BS N
compatibility
– Part 1: General CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
Electrical – Electromagnetic CE: 9 kHz ~ 30 MHz
EN 50121-1:2017 materials and SF-2 N
compatibility RE: 9 kHz ~ 6 GHz
232/433
No. KT393

RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±8 kV
Railway applications 20 V/m
Electrical – Electromagnetic EFT: ±2 kV
compatibility Surge: ±2 kV
components – Part 1: General CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
M/F: 300 A/m
PULSE M/F: 300 A/m
RE: 9 kHz ~ 6 GHz

CE: 9 kHz ~ 30 MHz
ESD: ±8 kV
Electrical – Electromagnetic 20 V/m
compatibility EFT: ±2 kV
10 V
V-DIP: max 100 %
– Electromagnetic
Electrical
EN 50121-3- materials and compatibility CE : 9 kHz ∼ 30 MHz BS N
1:2006/AC:2008 components –– Part 3-1: Rolling stock
Train and complete
vehicle
– Electromagnetic
Electrical
EN 50121-3- materials and compatibility RE : 9 kHz ∼ 1 GHz SF-1 N
1:2006/AC:2008 components –– Part 3-1: Rolling stock CE : 9 kHz ∼ 30 MHz
Train and complete
vehicle
– Electromagnetic
Electrical
Train and complete
vehicle
– Electromagnetic
Electrical
Train and complete
vehicle
– Electromagnetic
Electrical
EN 50121-3- materials and compatibility BS N
1:2017/A1:2019 components –– Part 3-1: Rolling stock CE: 9 kHz ~ 30 MHz
Train and complete
vehicle
233/433
No. KT393

– Electromagnetic
Electrical
EN 50121-3- materials and compatibility RE: 9 kHz ~ 1 GHz SF-1 N
Train and complete
vehicle
– Electromagnetic
Electrical
Train and complete
vehicle
– Electromagnetic
Electrical
Train and complete
vehicle

ESD: ±8 kV
Electrical – Electromagnetic
EN 50121-3- 20 V/m
2:2006/AC:2008 EFT: ±2 kV
components – Part 3-2: Rolling stock Surge: ±2 kV
– Apparatus CS: 150 kHz ~ 80 MHz
10 V
RE: 30 MHz ~ 1 GHz

Railway applications ESD: ±8 kV
Electrical – Electromagnetic RS: 80 MHz ~ 2.5 GHz
EN 50121-3- materials and compatibility 20 V/m SF-1 N
2:2006/AC:2008 components – Part 3-2: Rolling stock EFT: ±2 kV
– Apparatus Surge: ±2 kV
10 V
EN 50121-3- RE: 30 MHz ~ 1 GHz
2:2006/AC:2008 CE: 150 kHz ~ 30 MHz
components – Part 3-2: Rolling stock
– Apparatus
RE: 30 MHz ~ 1 GHz

EN 50121-3- materials and compatibility 20 V/m SF-3 N
2:2006/AC:2008 components – Part 3-2: Rolling stock EFT: ±2 kV
10 V
234/433
No. KT393

ESD: ±8 kV
EN 50121-3- EFT: ±1 kV
2:2016/A1:2019 SURGE: ±2 kV
V-DIP: max 100 %
ESD: ±8 kV
Electrical – Electromagnetic EFT: ±1 kV
EN 50121-3- materials and compatibility SURGE: ±2 kV SF-1 N
2:2016/A1:2019 components – Part 3-2: Rolling stock CS: 150 kHz ∼ 80
V-DIP: max 100 %
MF : 30 A/m
ESD: ±8 kV
EN 50121-3- EFT: ±1 kV
2:2016/A1:2019 SURGE: ±2 kV
V-DIP: max 100 %
Railway applications CE: 150 kHz ~ 30 MHz

– Electromagnetic ESD: ±8 kV
compatibility RS: 80 MHz ~ 2.5 GHz
Electrical
EN 50121- materials and –immunity
Part 4: Emission and 20 V/m BS N
4:2006/AC:2008 components signalling of the EFT: ±2 kV
and Surge: ±2 kV
telecommunications CS: 150 kHz ~ 80 MHz
apparatus 10 V
RE: 30 MHz ~ 1 GHz

– Electromagnetic RS: 80 MHz ~ 2.5 GHz
compatibility
Electrical 20 V/m
Part 4: Emission and EFT: ±2 kV SF-1 N
4:2006/AC:2008 components signalling of the Surge: ±2 kV
and CS: 150 kHz ~ 80 MHz
telecommunications 10 V
PLUSE M/F: 300 A/m
RE: 30 MHz ~ 1 GHz

compatibility
Electrical RS: 80 MHz ~ 2.5 GHz
4:2006/AC:2008 components signalling of the EFT: ±2 kV
and Surge: ±2 kV
telecommunications CS: 150 kHz ~ 80 MHz
apparatus 10 V
235/433
No. KT393

– Electromagnetic
compatibility
Electrical
Part 4: Emission and CE: 150 kHz ~ 30 MHz SF-2 N
4:2006/AC:2008 components signalling of the RE: 30 MHz ~ 1 GHz
and
telecommunications
apparatus
– Electromagnetic
compatibility
Electrical
Part 4: Emission and CE: 150 kHz ∼ 30 MHz SF-2 N
4:2016/A1:2019 components signalling of the RE: 30 MHz ∼ 1 GHz
and
telecommunications
apparatus
Railway applications CE: 150 kHz ∼ 30 MHz

compatibility
Part 4: Emission and SURGE: ±2 kV BS N
and MHz, 10 V
apparatus

compatibility RS: 80 MHz ∼ 6 GHz,
Electrical
4:2016/A1:2019 components signalling of the EFT: ±2 kV
and SURGE: ±2 kV
telecommunications CS: 150 kHz ∼ 80
apparatus MHz, 10 V
V-DIP: max 100 %

compatibility
Part 4: Emission and SURGE: ±2 kV SF-1 N
and MHz, 10 V

EN 50121- 20 V/m
materials and – Part 5: Emission and BS N
5:2006/AC:2008 EFT: ±2 kV
components immunity of fixed power Surge: ±2 kV
supply installations and CS: 150 kHz ~ 80 MHz
apparatus 10 V
236/433
No. KT393

– Electromagnetic
EN 50121- CE: 150 kHz ~ 30 MHz
5:2006/AC:2008 components immunity of fixed power RE: 30 MHz ~ 1 GHz
apparatus
RE: 30 MHz ~ 1 GHz

EN 50121- 20 V/m
5:2006/AC:2008 components immunity of fixed power EFT: ±2 kV
supply installations and CS: 150±2
Surge: kV
kHz ~ 80 MHz
apparatus 10 V
M/F: 300 A/m
RE: 30 MHz ~ 1 GHz

Electrical compatibility RS: 80 MHz ~ 2.5 GHz
EN 50121- materials and – Part 5: Emission and 20 V/m SF-3 N
5:2006/AC:2008 components immunity of fixed power EFT: ±2 kV
supply installations and Surge: ±2 kV
apparatus CS: 150 kHz ~ 80 MHz
10 V

EN 50121- materials and – Part 5: Emission and SURGE: ±2 kV BS N
– Electromagnetic
EN 50121- CE: 150 kHz ∼ 30 MHz
5:2017/A1:2019 components immunity of fixed power RE: 30 MHz ∼ 1 GHz
apparatus

EN 50121- materials and – Part 5: Emission and SURGE: ±2 kV SF-1 N
M/F: 300 A/m
237/433
No. KT393

– Electromagnetic RS: 80 MHz ∼ 6 GHz,
EN 50121- 20 V/m
5:2017/A1:2019 components immunity of fixed power EFT: ±2 kV
supply installations and CS: 150 ±2
SURGE: kV
kHz ∼ 80
apparatus MHz, 10 V
V-DIP: max 100 %
Alarm systems - Part 4: ESD: ±8 kV

Electromagnetic RS: 80 MHz ~ 2.7 GHz
compatibility - Product 10 V/m
Electrical family standard:
EN 50130- EFT: ±2 kV
materials and Immunity requirements SF-3 N
4:2011/A1:2014 Surge: ±2 kV
components for components of fire, CS: 150 kHz ~ 100
alarm systems
Alarm systems - Part 4: ESD: ±8 kV

compatibility - Product 10 V/m
Electrical family standard:
EN 50130- EFT: ±2 kV
materials and Immunity requirements SF-1 N
4:2011/A1:2014 Surge: ±2 kV
components for components of fire, CS: 150 kHz ~ 100
alarm systems

compatibility - Product RS: 80 MHz ~ 2.7 GHz
Electrical family standard: 10 V/m
EN 50130- materials and Immunity requirements EFT: ±2 kV BS N
4:2011/A1:2014 components for components of fire, Surge: ±2 kV
intruder, hold up, CCTV, CS: 150 kHz ~ 100
access control and social MHz 10 V
alarm systems V-DIP: max 100 %
ESD: ±8 kV
10 V/m
EN 50155:2017 materials and Rolling stock-Electronic SF-3 N
SURGE: ±2 kV
MHz, 3 V
V-DIP: max 100 %
ESD: ±8 kV
10 V/m
EN 50155:2017 materials and Rolling stock-Electronic SURGE: ±2 kV SF-1 N
MHz, 3 V
V-DIP: max 100 %
MF : 30 A/m
238/433
No. KT393

ESD: ±8 kV
10 V/m
EN 50155:2017 materials and Rolling stock-Electronic BS N
SURGE: ±2 kV
MHz, 3 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

Electromagnetic
compatibility - Electrical ESD: ±8 kV
EN 50270:2006 materials and detection and SF-3 N
EFT: ±2 kV
V-DIP: max 100 %

compatibility - Electrical RS: 80 MHz ~ 2.7 GHz
EN 50270:2006 materials and detection and EFT: ±2 kV BS N
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

EN 50270:2006 materials and detection and EFT: ±2 kV SF-1 N
V-DIP: max 100 %
M/F: 30 A/m
Electromagnetic
compatibility - Electrical
RE: 30 MHz ~ 6 GHz
gases or oxygen
RE: 30 MHz ~ 6 GHz

Electromagnetic
compatibility - Electrical ESD: ±8 kV
EFT: ±2 kV
V-DIP: max 100 %
239/433
No. KT393

EN 50270:2015 materials and detection and EFT: ±2 kV BS N
V-DIP: max 100 %
Electromagnetic
compatibility - Electrical
RE: 30 MHz ~ 6 GHz
gases or oxygen
RE: 30 MHz ~ 6 GHz

EN 50270:2015 materials and detection and EFT: ±2 kV SF-1 N
V-DIP: max 100 %
M/F: 30 A/m

Electromagnetic
EN Electrical
55011:2009+A1:2 materials and disturbance BS N
components characteristics – Limits CE : 9 kHz ∼ 30 MHz
010 and methods of
measurement
[Exception]
- 30 m test method

Electromagnetic
EN Electrical
55011:2009+A1:2 materials and disturbance RE : 9 kHz ∼ 6 GHz SF-3 N
010 components and methods of
measurement
[Exception]
- 30 m test method
240/433
No. KT393

Electromagnetic
EN Electrical
measurement
[Exception]
- 30 m test method

Electromagnetic
EN Electrical
measurement
[Exception]
- 30 m test method

medical equipment-
Radiofrequency
EN Electrical disturbance
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method

medical equipment-
Radiofrequency
CE: 9 kHz ~ 30 MHz
measurement
[exception]
- 30 m test method
241/433
No. KT393

medical equipment-
Radiofrequency
55011:2016+A11: materials and characteristic-Limits and CE: 9 kHz ~ 30 MHz BS N
measurement
[exception]
- 30 m test method

medical equipment-
Radio-frequency
55011:2016+A1:2 materials and characteristic-Limits and CE : 9 kHz ∼ 30 MHz BS N
measurement
[Exception]
- 30 m test method

medical equipment-
Radio-frequency
55011:2016+A1:2 materials and characteristic-Limits and RE : 9 kHz ∼ 6 GHz SF-1 N
CE : 9 kHz ∼ 30 MHz
measurement
[Exception]
- 30 m test method

medical equipment-
Radio-frequency
measurement
[Exception]
- 30 m test method

medical equipment-
Radio-frequency
measurement
[Exception]
- 30 m test method

Electrical associated equipment CE : 150 kHz ∼ 30
EN 55013:2013 materials and – Radio disturbance BS N
MHz
components characteristics
measurement
242/433
No. KT393

broadcast receivers and RE : 30 MHz ∼ 18
Electrical associated equipment GHz
EN 55013:2013 materials and – Radio disturbance SF-2 N
CE : 150 kHz ∼ 30
components characteristics MHz
measurement

CE : 150 kHz ∼ 30
measurement

CE : 150 kHz ∼ 30
measurement

EN Electrical associated equipment - RE : 30 MHz ∼ 18 GHz
and methods of
measurement

and methods of
measurement

and methods of
measurement

EN Electrical associated equipment -
55013:2013+A1:2 materials and Radio disturbance CE : 150 kHz ∼ 30 BS N
and methods of
measurement
243/433
No. KT393

Electromagnetic
compatibility -
EN 55014- Electrical Requirements for
1:2006+A1:2009 materials and household appliances, CE : 150 kHz ∼ 30 BS N
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
EN 55014- Electrical Requirements for RE : 30 MHz ∼ 1 GHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
EN 55014-1:2017 materials and household appliances, CE : 150 kHz ∼ 30 SF-2 N
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
EN 55014-1:2017 materials and household appliances, CE : 150 kHz ∼ 30 BS N
apparatus
- Part 1: Emission
244/433
No. KT393

Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
EN 55014- RE: 30 MHz ~ 1 GHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
EN 55014- RE: 30 MHz ~ 1 GHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
EN 55014-
materials and appliances, BS N
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
EN 55014- RE: 30 MHz ~ 1 GHz
apparatus
- Part 1: Emission
compatibility - RS: 80 MHz ~ 1 GHz 3
Requirements for V/m
EN 55014- Electrical
2:1997+A1:2001 SF-3 N
electric tools Surge: ±2 kV
+A2:2008 CS: 150 kHz ~ 80 MHz
- Part 2: Immunity - 3V
2:1997+A1:2001 BS N
+A2:2008 CS: 150 kHz ~ 80 MHz
245/433
No. KT393

2:1997+A1:2001 SF-1 N
+A2:2008 CS: 150 kHz ~ 80 MHz
Electrical
EN 55014-2:2015 BS N
CS: 150 kHz ∼ 230
Electrical
EN 55014-2:2015 SF-1 N
CS: 150 kHz ∼ 230
Electrical
EN 55014-2:2015 SF-3 N
CS: 150 kHz ∼ 230

disturbance
characteristics of
Electrical
EN 55015:2013 SF-3 N
loss easurement

disturbance
characteristics of
Electrical
EN 55015:2013 SF-1 N
loss easurement
246/433
No. KT393

disturbance
characteristics of
Electrical
materials and electrical lighting and CE : 9 kHz ∼ 30 MHz
EN 55015:2013 SF-2 N
similar equipment RE : 9 kHz ∼ 300 MHz
loss easurement

disturbance
characteristics of
Electrical
EN 55015:2013 BS N
loss easurement

disturbance
characteristics of
EN Electrical
55015:2013+A1:2 materials and electrical lighting similar RE: 9 kHz ∼ 300 MHz SF-2 N
equipment CE: 9 kHz ∼ 30 MHz
015 components [Exception]
- 4.2 Insertion loss
- 7 Method of insertion
loss measurement

disturbance
characteristics of
EN Electrical
55015:2013+A1:2 materials and electrical lighting similar RE: 9 kHz ∼ 300 MHz BS N
loss measurement

disturbance
characteristics of
EN Electrical
loss measurement
247/433
No. KT393

disturbance
characteristics of
EN Electrical
loss measurement
Information technology
equipment - Radio
EN 55022:2010 materials and disturbance CE : 150 kHz ∼ 30 SF-3 N
AC:2011 characteristics - Limits
components and methods of MHz
measurement
equipment - Radio
Electrical
EN 55022:2010 materials and disturbance CE : 150 kHz ∼ 30 BS N
AC:2011 components characteristics - Limits MHz
and methods of
measurement
equipment - Radio
EN 55022:2010 materials and disturbance CE : 150 kHz ∼ 30 SF-1 N
AC:2011 characteristics - Limits
measurement
equipment - Radio
Electrical
EN 55022:2010 materials and disturbance RE : 30 MHz ∼ 6 GHz SF-2 N
AC:2011 components characteristics - Limits
and methods of
measurement
ESD: ±8 kV
3 V/m
EN Electrical equipment - Immunity EFT: ±1 kV
55024:2010+A1:2 materials and characteristics - Limit BS N
SURGE: ±2 kV
015 components and method of CS: 150 kHz ∼ 80
M/F: 1 A/m
ESD: ±8 kV
55024:2010+A1:2 materials and characteristics - Limit SURGE: ±2 kV SF-1 N
M/F: 1 A/m
V-DIP: max 100 %
248/433
No. KT393

ESD: ±8 kV
3 V/m
55024:2010+A1:2 materials and characteristics - Limit SF-3 N
SURGE: ±2 kV
V-DIP: max 100 %
Electromagnetic
EN Electrical RE : 30 MHz ∼ 6 GHz
compatibility of
55032:2012/AC:2 materials and multimedia equipment – CE : 150 kHz ∼ 30 SF-3 N
013 components Emission requirements MHz
Electromagnetic
compatibility of
013 components MHz
Electromagnetic
EN Electrical compatibility of CE : 150 kHz ∼ 30
55032:2012/AC:2 materials and BS N
multimedia equipment – MHz
013 components Emission requirements
Electromagnetic
compatibility of
013 components MHz
Electromagnetic
EN 55032:2015 materials and BS N
Electromagnetic
EN 55032:2015 materials and SF-1 N
Electromagnetic
Electromagnetic
Electromagnetic
EN Electrical compatibility of
55032:2015+A11: materials and BS N
Electromagnetic
EN Electrical compatibility of RE: 30 MHz ∼ 6 GHz
249/433
No. KT393

Electromagnetic
Electromagnetic
ESD: ±8 kV
Electromagnetic V/m
Electrical
EN 55035 : 2017 BS N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
Electromagnetic
EN 55035 : 2017 equipment - Surge: ±2 kV SF-1 N
MF : 1 A/m
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic V/m
Electrical
EN 55035 : 2017 SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic V/m
Electrical
EN 55035 : 2017 + materials and multimedia equipment - EFT:
compatibility of ±1 kV BS N
A11 : 2020 components Immunity requirements CS: 150±2
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
Electromagnetic
EN 55035 : 2017 + materials and compatibility of
equipment - Surge: ±2 kV SF-1 N
A11 : 2020 components multimedia CS: 150 kHz ~ 80 MHz
MF : 1 A/m
V-DIP: max 100 %
250/433
No. KT393

ESD: ±8 kV
Electromagnetic V/m
Electrical
EN 55035 : 2017 + materials and multimedia equipment - EFT:
compatibility of ±1 kV SF-3 N
A11 : 2020 components Immunity requirements CS: 150±2
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %

Medical electrical ESD: ±8 kV
equipment - Part 1-2 : RS: 80 MHz ~ 2.5 GHz
Electrical 10 V/m
EN 60601-1- materials and for safety - Collateral EFT: ±2 kV BS N
2:2007 components standard : Surge: ±2 kV
Electromagnetic CS: 150 kHz ~ 80 MHz
compatibility - 10 V
Medical electrical
equipment - Part 1-2 :
Electrical RE: 30 MHz ~ 6 GHz
EN 60601-1- materials and for safety - Collateral CE : 150 kHz ∼ 30 SF-2 N
2:2007 standard :
components Electromagnetic MHz
compatibility -
RE: 30 MHz ~ 6 GHz

Electrical 10 V/m
EN 60601-1- materials and for safety - Collateral EFT: ±2 kV SF-1 N
2:2007 components standard : Surge: ±2 kV
M/F: 3 A/m
RE: 30 MHz ~ 6 GHz

equipment - Part 1-2 : ESD: ±8 kV
General requirements RS: 80 MHz ~ 2.5 GHz
Electrical
EN 60601-1- materials and for safety - Collateral 10 V/m SF-3 N
2:2007 standard : EFT: ±2 kV
components Electromagnetic Surge: ±2 kV
compatibility - CS: 150 kHz ~ 80 MHz
Requirements and tests 10 V
V-DIP: max 100 %

Electrical 10 V/m
EN 60601-1- materials and for safety - Collateral EFT: ±2 kV BS N
2:2007/AC:2010 components standard : Surge: ±2 kV
251/433
No. KT393

Medical electrical
Electrical RE: 30 MHz ~ 6 GHz
EN 60601-1- materials and for safety - Collateral CE : 150 kHz ∼ 30 SF-2 N
2:2007/AC:2010 standard :
components Electromagnetic MHz
compatibility -
RE: 30 MHz ~ 6 GHz

Electrical 10 V/m
EN 60601-1- materials and for safety - Collateral EFT: ±2 kV SF-1 N
2:2007/AC:2010 standard :
M/F: 3 A/m
RE: 30 MHz ~ 6 GHz

Electrical
EN 60601-1- materials and for safety - Collateral 10 V/m SF-3 N
2:2007/AC:2010 standard : EFT: ±2 kV
V-DIP: max 100 %

equipment – ESD: ±15 kV
Part 1-2: General RS: 80 MHz ∼ 6 GHz,
requirements for basic 10 V/m
Electrical
EN 60601-1- materials and safety and essential EFT: ±2 kV BS N
2:2015 performance – Surge: ±2 kV
components Collateral Standard: CS: 150 kHz ∼ 80
Medical electrical
equipment –
Part 1-2: General
requirements for basic
Electrical
EN 60601-1- materials and safety and essential RE: 30 MHz ∼ 6 GHz SF-2 N
2:2015 performance – CE: 150 kHz ∼ 30 MHz
Electromagnetic
disturbances –
252/433
No. KT393

RE: 30 MHz ~ 6 GHz
Part 1-2: General RS: 80 MHz ~ 6 GHz,
Electrical 10 V/m
EN 60601-1- materials and safety and essential EFT: ±2 kV SF-1 N
2:2015 components performance – Surge: ±2 kV
Collateral Standard: CS: 150 kHz ~ 80 MHz,
Electromagnetic 10 V
disturbances – MF : 30 A/m
RE: 30 MHz ~ 6 GHz

Electrical 30 V/m
2:2015 components performance – Surge: ±2 kV
Collateral Standard: CS: 150 kHz ~ 80 MHz,
disturbances – MF : 30 A/m

equipment – ESD: ±15kV
Electrical 10 V/m
EN 60601-1- materials and safety and essential EFT: ±1 kV BS N
2:2015+A1:2021 performance –
CS: 150 kHz ~ 80 MHz,
disturbances – V-DIP: max 100 %
Medical electrical
equipment –
Part 1-2: General
Electrical
EN 60601-1- materials and safety and essential RE: 30 MHz ~ 6 GHz SF-2 N
2:2015+A1:2021 performance – CE: 150 kHz ~ 30 MHz
Electromagnetic
disturbances –
RE: 30 MHz ~ 6 GHz

Electrical
2:2015+A1:2021 performance – Surge: ±2 kV
components Collateral Standard: CS: 150 kHz ~ 80 MHz,
Requirements and tests RF in close proximity: 9
kHz ~ 26 MHz
253/433
No. KT393

Medical electrical RE: 30 MHz ~ 6 GHz
equipment – CE: 150 kHz ~ 30 MHz
Part 1-2: General ESD: ±15 kV
requirements for basic RS: 80 MHz ~ 6 GHz,
Electrical
EN 60601-1- materials and safety and essential 10 V/m SF-3 N
2:2015+A1:2021 performance – EFT: ±1 kV

Maritime navigation and ESD: ±8 kV
RS: 80 MHz ~ 2 GHz
radiocommunication
Electrical 10 V/m
materials and equipment and systems
EN 60945:2002 General requirements - EFT: ±2 kV BS N
components -Methods of testing and CS: 150±2
Surge: kV
kHz ~ 80 MHz
required test results 10 V
V-DIP: max 100 %
Maritime navigation and

radiocommunication
Electrical
materials and equipment and systems RE: 30 MHz ~ 6 GHz
EN 60945:2002 SF-2 N
components Methods of testing and - CE: 150 kHz ~ 30 MHz
- General requirements
required test results
RE: 30 MHz ~ 6 GHz

radiocommunication RS: 80 MHz ~ 2 GHz
Electrical
materials and - General requirements - 10
equipment and systems V/m
EN 60945:2002 SF-1 N
EFT: ±2 kV
components Methods of testing and Surge: ±2 kV
required test results CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

RS: 80 MHz ~ 2 GHz
radiocommunication
Electrical 10 V/m
materials and equipment and systems EFT: ±2 kV
EN 60945:2002 SF-3 N
components Methods of testing and - Surge: ±2 kV
V-DIP: max 100 %
LFCS: 50 Hz ~ 10 kHz
Electromagnetic
Part 2-2: Environment -
Electrical Compatibility levels for
EN 61000-2- materials and low-frequency 3Φ, (0 ∼ 620) V SF-1 N
2:2002 components conducted disturbances
and signalling in public
low-voltage power
supply systems
254/433
No. KT393

Electromagnetic
EN 61000-2- materials and low-frequency 3Φ, (0 ∼ 620) V SF-1 N
2:2002/A2:2019 components conducted disturbances
low-voltage power
supply systems
Electromagnetic
compatibility(EMC)－Par
t
Electrical LFCD: Frequency : (0 ∼
EN 61000-2- materials and 2－4：Environment－Co 9) kHz SF-1 N
4:2002 mpatibility levels in
components industrial plants for low- max 35 kV
frequency conducted
disturbances
Limits – Limits for

harmonic currents
Electrical produced by equipment
EN 61000-3- materials and connected to public 3 Phase 500 V, 63 A SF-1 N
12:2011 components low-voltage systems
with input current >16 A
and ≤75 A per phase

harmonic currents
Electrical produced by equipment
EN 61000-3- materials and connected to public 3 Phase 500 V, 63 A SF-3 N
12:2011 components low-voltage systems
Limits for harmonic

EN 61000-3- Electrical current emission
2:2006 materials and (equipment input Harmonic: max 16 A SF-1 N
+A1:2009+A2:200 components current ≤ 16 A per
9 phase)
Limits for harmonic

9 phase)
Limits for harmonic

9 phase)
Limits for harmonic

EN 61000-3- materials and (equipment input Harmonic: max 16A SF-1 N
2:2014 components current ≤ 16 A per
phase)
255/433
No. KT393

Limits for harmonic
phase)
Limits for harmonic

phase)
changes, voltage
fluctuation and flicker in
Electrical public low-voltage
EN 61000-3- materials and supply systems, for Flicker: max 16 A SF-1 N
3:2008 components equipment with rated
current ≤ 16 A per
changes, voltage
changes, voltage
voltage changes,
EN 61000-3- materials and voltage supply systems, Flicker: max 16 A SF-3 N
256/433
No. KT393

voltage changes,
voltage changes,
Electromagnetic
Electrical Part 4-10: Testing and
EN 61000-4- materials and measurement max 100 A/m SF-3 N
10:2017 components techniques - Damped
oscillatory magnetic field
immunity test
Electromagnetic
immunity test
Testing and
measurement
Electrical
EN 61000-4- materials and techniques - Voltage V-DIP: max 100 % BS N
11:2004 dips, short interruptions
components and voltage variations
immunity tests
Testing and
measurement
Electrical
EN 61000-4- materials and techniques - Voltage V-DIP: max 100 % SF-3 N
immunity tests
Testing and
measurement
Electrical
EN 61000-4- materials and techniques - Voltage V-DIP: max 100 % SF-1 N
immunity tests
257/433
No. KT393

Testing and
measurement
EN 61000-4- materials and Voltage dips, short V-DIP: max 100 % SF-3 N
voltage variations
immunity tests
Testing and
measurement
EN 61000-4- materials and Voltage dips, short V-DIP: max 100 % SF-1 N
voltage variations
immunity tests
Testing and
measurement
EN 61000-4- materials and Voltage dips, short V-DIP: max 100 % BS N
voltage variations
immunity tests
Electromagnetic
Electrical
EN 61000-4- materials and Part 4-12: Testing and max ±6 kV SF-1 N
12:2017 measurement
components techniques – Ring wave
immunity test
Electromagnetic
Electrical
EN 61000-4- materials and Part 4-12: Testing and max ±6 kV SF-3 N
12:2017 measurement
immunity test
Testing and
measurement
techniques
EN 61000-4- Electrical - Harmonics and
13:2002 materials and interharmonics including 3 Phase 500 V, 63 A SF-1 N
/A1:2009 components mains signalling at a.c.
power port, low
frequency immunity
tests
Testing and
measurement
techniques
Electrical - Harmonics and 100 Hz ∼ 3 kHz
EN 61000-4-
13:2002+A2:2016 components mains signalling at a.c. Test
materials and interharmonics including Level : U1 (1.5 ∼ SF-1 N
12) %
power port, low
frequency immunity
tests
258/433
No. KT393

Testing and
measurement
EN 61000-4- techniques
Electrical
14:1999 materials and -immunity
Voltage fluctuation 3 Phase 500 V, 63 A SF-1 N
/A1:2004/A2:200 components equipmenttest for
9 with input
current not exceeding
16 A per phase
Electromagnetic
measurement
EN 61000-4- Electrical
materials and techniques - Test for
16:1998 conducted, 0 Hz ∼ 150 kHz SF-3 N
immunity to
+A2:2011 components common mode
disturbances in the
frequency range 0 Hz to
150 kHz
Electromagnetic
Part 4-16: Testing and d.c., 162/3 Hz, 50 Hz,
measurement
Electrical 60 Hz : (1 ∼ 30) V
EN 61000-4- materials and techniques - Test for SF-3 N
16:2016 immunity to conducted,
components common mode 15 Hz ∼ 150 kHz : (0.1
∼ 30) V
disturbances in the
150 kHz
Testing and
EN 61000-4- measurement
Electrical
17:1999 materials and techniques DC 500 V SF-1 N
/A1:2004/A2:200 components -power
Ripple on d.c. input
9 port immunity
test
Electromagnetic
measurement
techniques - Test for
Electrical
EN 61000-4- materials and immunity to conducted, LFCS: (2 ∼ 150) kHz, SF-3 N
19:2014 differential mode 30 V
signalling in the
to 150 kHz at a.c. power
ports
Testing and
measurement
techniques
materials and -test
Unbalance, immunity 3상 500 V, 63 A
27:2000 SF-1 N
components inputfor equipment with
/A1:2009 current not
exceeding 16 A per
phase
259/433
No. KT393

Testing and
measurement
techniques
EN 61000-4- Electrical - Variation of power
28:2000 materials and frequency, immunity 3상 500 V, 63 A SF-1 N
/A1:2004/A2:200 components test for equipment with
9 input current not
exceeding 16 A per
phase
Testing and
measurement
techniques
Electrical
EN 61000-4- materials and -interruptions
Voltage dips, short DC 500 V SF-3 N
29:2001 and
components voltage variations on
d.c. input power port
immunity tests
Testing and
measurement
techniques
Electrical
EN 61000-4- materials and -interruptions
29:2001 and
immunity tests
Testing and
EN 61000-4- materials and techniques ESD: max ±30 kV SF-3 N
immunity test
Testing and
EN 61000-4- materials and techniques ESD: max ±30 kV BS N
immunity test
Testing and
EN 61000-4- materials and techniques ESD: max ±30 kV SF-1 N
immunity test
Electromagnetic
measurement
EN 61000-4- Electrical techniques – Voltage
34:2007 materials and dips, short interruptions 3Φ, (0 ∼ 620) V SF-1 N
+A1:2009 components and voltage variations
immunity tests for
current more than 16 A
per phase
260/433
No. KT393

Electromagnetic
EN 61000-4- materials and techniques - Radiated immunity : SF-2 N
Immunity test
[Exception]
*380MHz ~ 6 GHz
Testing and
measurement
materials and techniques - Radiated, RS: 80 MHz ~ 3 GHz
3:2006 SF-3 N
radio-frequency, 10 V/m
+A1:2008 components electromagnetic field
immunity test
Testing and
measurement
3:2006 SF-1 N
immunity test
Testing and
measurement
3:2006 BS N
immunity test
Testing and
measurement RS: 80 MHz ~ 1 GHz
materials and techniques - Radiated, 10 V/m
3:2006+A1:2008 SF-3 N
radio-frequency, 1 GHz ~ 3 GHz 10
+A2:2010 components electromagnetic field V/m
immunity test
Testing and
3:2006+A1:2008 SF-1 N
immunity test
Testing and
3:2006+A1:2008 BS N
immunity test
Testing and
measurement
Electrical
EN 61000-4- materials and techniques EFT: max ±4 Kv BS N
Electrical fast
immunity
test
261/433
No. KT393

Testing and
measurement
Electrical
EN 61000-4- materials and techniques EFT: max ±4 kV SF-1 N
Electrical fast
immunity
test
Testing and
measurement
Electrical
EN 61000-4- materials and techniques EFT: max ±4 kV SF-3 N
Electrical fast
immunity
test
Electromagnetic
Electrical
EN 61000-4- materials and Part 4-5: Testing and SURGE: max ±6 kV SF-3 N
5:2014/A1:2017 measurement
immunity test
Electromagnetic
Electrical
EN 61000-4- materials and Part 4-5: Testing and SURGE: max ±6 kV BS N
immunity test
Electromagnetic
Electrical
EN 61000-4- materials and Part 4-5: Testing and SURGE: max ±6 kV SF-1 N
immunity test
Testing and
measurement
Electrical
EN 61000-4- materials and techniques - Immunity CS: 150 kHz ∼ 230 BS N
6:2014 components disturbances, induced by MHz, 10 V
to conducted
radio-frequency fields
Testing and
measurement
Electrical
EN 61000-4- materials and techniques - Immunity CS: 150 kHz ∼ 230 SF-1 N
to conducted
Testing and
measurement
Electrical
EN 61000-4- materials and techniques - Immunity CS: 150 kHz ∼ 230 SF-3 N
to conducted
262/433
No. KT393

Electromagnetic
EN 61000-4- materials and measurement MF: max 30 A/m SF-3 N
frequencymagnetic field
immunity test
Electromagnetic
EN 61000-4- materials and measurement MF: max 30 A/m SF-1 N
immunity test
Electromagnetic
EN 61000-4- materials and measurement MF: max 30 A/m BS N
immunity test
Electromagnetic
9:2016 components techniques - Impulse
magnetic field immunity
test
Electromagnetic
test
compatibility - Part 6-1 : RS: 80 MHz ~ 2.7 GHz
Generic Standard - 3 V/m
Electrical Immunity for residential, EFT: ±1 kV
EN 61000-6- materials and commercial and light- Surge: ±2 kV BS N
1:2007 components industrial environments CS: 150 kHz ~ 80 MHz
[Exception] 3V
- Scope and object : V-DIP: max 100 %
below 26.5 GHz M/F : 3 A/m
EN 61000-6- materials and commercial and light- Surge: ±2 kV SF-1 N
[Exception] 3V
263/433
No. KT393

EN 61000-6- materials and commercial and light- Surge: ±2 kV SF-3 N
[Exception] 3V
ESD: ±8 kV
Electrical compatibility - Part 6-2 : EFT: ±2 kV
EN 61000-6- materials and Generic Standard - Surge: ±2 kV SF-2 N
2:2005 components Immunity for industrial CS: 150 kHz ~ 80 MHz
environments 10 V
V-DIP: max 100 %
M/F : 3 A/m
ESD: ±8 kV
environments 10 V
V-DIP: max 100 %
M/F : 3 A/m
ESD: ±8 kV
environments 10 V
V-DIP: max 100 %
M/F : 3 A/m
ESD: ±8 kV
compatibility (EMC) 10 V/m
Electrical
EN 61000-6- materials and –standards
Part 6-2: Generic EFT: ±2 kV BS N
2:2005/AC:2005 Surge: ±2 kV
components – Immunity for industrial CS: 150 kHz ~ 80 MHz
environments 10 V
V-DIP: max 100 %
ESD: ±8 kV
compatibility (EMC)
Part 6-2: Generic Surge: ±2 kV SF-1 N
2:2005/AC:2005 components – Immunity for industrial CS: 150 kHz ~ 80 MHz
10 V
MF : 30 A/m
264/433
No. KT393

ESD: ±8 kV
compatibility (EMC) 10 V/m
Electrical
Part 6-2: Generic EFT: ±2 kV SF-3 N
2:2005/AC:2005 Surge: ±2 kV
components – Immunity for industrial CS: 150 kHz ~ 80 MHz
environments 10 V
V-DIP: max 100 %
Electromagnetic
compatibility - Part 6-3 :
Generic Standard -
Emission standard for
Electrical
EN 61000-6- materials and residential, commercial CE : 150 kHz ∼ 30 BS N
3:2007 and light-industrial
components environments MHz
[Exception]
- Scope and object :
below 26.5 GHz
Electromagnetic
Generic Standard -
Electrical commercial RE : 30 MHz ∼ 6 GHz
EN 61000-6- materials and residential, CE : 150 kHz ∼ 30 SF-1 N
3:2007 components and light-industrial MHz
environments
[Exception]
below 26.5 GHz
Electromagnetic
Generic Standard -
Electrical commercial RE : 30 MHz ∼ 6 GHz
EN 61000-6- materials and residential, CE : 150 kHz ∼ 30 SF-3 N
3:2007 and light-industrial
components environments MHz
[Exception]
below 26.5 GHz
Electromagnetic
compatibility (EMC)
materials and standards RE : 9 kHz ∼ 6 GHz
3:2007/A1:2011 SF-3 N
components –residential,
/AC:2012 commercial
environments
Electromagnetic
compatibility (EMC)
3:2007/A1:2011 SF-1 N
/AC:2012 commercial
environments
265/433
No. KT393

Electromagnetic
compatibility (EMC)
3:2007/A1:2011 materials and standards CE : 9 kHz ∼ 30 MHz BS N
/AC:2012 commercial
environments
Electromagnetic
compatibility (EMC)
3:2007/A1:2011 SF-2 N
/AC:2012 commercial
environments
Electromagnetic
Electrical compatibility - Part 6-4 : RE : 30 MHz ∼ 6 GHz
EN 61000-6- materials and Generic Standard - CE : 150 kHz ∼ 30 SF-1 N
4:2007 components Emission standard for MHz
Electromagnetic
Electromagnetic
Electromagnetic
compatibility (EMC)
Electrical
4:2007/A1:2011 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
4:2007/A1:2011 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
4:2007/A1:2011 CE : 9 kHz ∼ 30 MHz
266/433
No. KT393

Electromagnetic
compatibility (EMC)
Electrical
Part 6-4: Generic CE : 9 kHz ∼ 30 MHz BS N
4:2007/A1:2011 components – Emission standard for

ESD: ±8 kV
Low voltage switch RS: 80 MHz ∼ 2.7 GHz
Electrical mode power supplies- 3 V/m
Part 3: Electromagnetic EFT: ±1 kV
components compatibility (EMC) Surge: ±2 kV
3V
V-DIP: max 100 %

ESD: ±8 kV
3V
V-DIP: max 100 %
Low voltage switch

Electrical mode power supplies- CE: 150 kHz ∼ 30 MHz
Part 3: Electromagnetic RE: 30 MHz ~ 1 GHz
components compatibility (EMC)

ESD: ±8 kV
RS: 80 MHz ∼ 2.7 GHz
Low voltage switch
Electrical 3 V/m
mode power supplies-
EN 61204-3:2018 materials and EFT: ±1 kV BS N
Part 3: Electromagnetic
compatibility (EMC) CS: 150 kHz ∼ 80 MHz
3V
V-DIP: max 100 %

Electrical 10 V/m
materials and and laboratory use
EN 61326-1:2013 EFT: ±2 kV BS N
– EMC requirements
components – Part 1: Surge: ±2 kV
General CS: 150 kHz ~ 80 MHz
requirements 10 V
V-DIP: max 100 %

Electrical
materials and and laboratory use RE: 30 MHz ~ 6 GHz
EN 61326-1:2013 SF-2 N
– EMC requirements CE: 150 kHz ~ 30 MHz
requirements
267/433
No. KT393

RE: 30 MHz ~ 6 GHz
Electrical 10 V/m
EN 61326-1:2013 EFT: ±2 kV SF-1 N
components –– EMC requirements Surge: ±2 kV
Part 1: General CS: 150 kHz ~ 80 MHz
requirements 10 V
V-DIP: max 100 %
M/F: 30 A/m
RE: 30 MHz ~ 6 GHz

measurement, control RS: 80 MHz ~ 2.7 GHz
Electrical and laboratory use 10 V/m
EN 61326-1:2013 materials and – EMC requirements SF-3 N
EFT: ±2 kV
10 V
V-DIP: max 100 %

and laboratory use CE: 150 kHz ~ 30 MHz
– EMC requirements ESD: ±8 kV
– Part 2-1: Particular RS: 80 MHz ~ 2.7 GHz
requirements
Electrical 10 V/m
EN 61326-2- materials and –operational
Test configurations, EFT: ±2 kV BS N
1:2013 conditions
components and performance Surge: ±2 kV
criteria CS: 150 kHz ~ 80 MHz
for sensitive test and 10 V
measurement V-DIP: max 100 %
equipment for EMC
unprotected
applications

and laboratory use
– Part 2-1: Particular
requirements
Electrical
Test configurations, RE: 30 MHz ~ 6 GHz SF-2 N
1:2013 components and performance criteria CE: 150 kHz ~ 30 MHz
conditions
for sensitive test and

measurement
equipment for EMC
unprotected
applications
268/433
No. KT393

measurement, control RE: 30 MHz ~ 6 GHz
requirements
Electrical 10 V/m
Test configurations, EFT: ±2 kV SF-1 N
1:2013 conditions
equipment for EMC M/F: 30 A/m
unprotected
applications

and laboratory use RE: 30 MHz ~ 6 GHz
– Part 2-1: Particular ESD: ±8 kV
requirements RS: 80 MHz ~ 2.7 GHz
Electrical
Test configurations, 10 V/m SF-3 N
1:2013 conditions EFT: ±2 kV
components and performance criteria Surge: ±2 kV
for sensitive test and CS: 150 kHz ~ 80 MHz
measurement 10 V
equipment for EMC V-DIP: max 100 %
unprotected
applications

requirements
Electrical 10 V/m
2:2013 conditions
for portable test, 10 V
measuring and V-DIP: max 100 %
used in low-voltage
distribution systems

and laboratory use
requirements
Electrical
conditions
for portable test,

measuring and
used in low-voltage
269/433
No. KT393

requirements
Electrical 10 V/m
2:2013 conditions
monitoring equipment M/F: 30 A/m
used in low-voltage

Electrical
for portable test, CS: 150 kHz ~ 80 MHz
measuring and 10 V
monitoring equipment V-DIP: max 100 %
used in low-voltage

Electrical
EN 61326-2- materials and requirements 10 V/m SF-3 N
3:2013 components –operational
Test configurations, EFT: ±2 kV
conditions Surge: ±2 kV
and performance criteria CS: 150 kHz ~ 80 MHz
for transducers with 10 V
integrated or remote V-DIP: max 100 %
signal conditioning
Electrical equipment for RE: 30 MHz ~ 6 GHz

measurement, control CE: 150 kHz ~ 30 MHz
and laboratory use ESD: ±8 kV
– EMC requirements RS: 80 MHz ~ 2.7 GHz
Electrical 10 V/m
EN 61326-2- materials and requirements EFT: ±2 kV SF-1 N
Test configurations, Surge: ±2 kV
conditions CS: 150 kHz ~ 80 MHz
and performance criteria 10 V
for transducers with V-DIP: max 100 %
integrated or remote M/F: 30 A/m
signal conditioning
270/433
No. KT393

Electrical 10 V/m
EN 61326-2- materials and requirements EFT: ±2 kV BS N
integrated or remote
signal conditioning

and laboratory use
Electrical
EN 61326-2- materials and requirements RE: 30 MHz ~ 6 GHz SF-2 N
3:2013 – Test configurations, CE: 150 kHz ~ 30 MHz
components operational conditions
and performance criteria
for transducers with
signal conditioning

and laboratory use
Electrical Test configurations, 10 V/m
EN 61326-2- materials and operational conditions EFT: ±2 kV BS N
4:2013 components and performance criteria Surge: ±2 kV
for insulation CS: 150 kHz ~ 80 MHz
monitoring devices 10 V
according to IEC 61557- V-DIP: max 100 %
8 and for equipment for
insulation fault location
according

and laboratory use
requirements
Electrical Test configurations,
EN 61326-2- RE: 30 MHz ~ 6 GHz
materials and operational conditions SF-2 N
for insulation
monitoring devices
according to IEC 61557-
according
271/433
No. KT393

EN 61326-2- materials and operational conditions EFT: ±2 kV SF-1 N
8 and for equipment for M/F: 30 A/m
according

EN 61326-2- 10 V/m
4:2013 EFT: ±2 kV
according

Electrical 10 V/m
EN 61326-2- materials and requirements – EFT: ±2 kV BS N
5:2013 Test configurations,
components operational conditions Surge: ±2 kV
for field devices with V-DIP: max 100 %
interfaces according to
IEC 61784-1, CP 3/2

and laboratory use
Electrical
EN 61326-2- materials and requirements – RE: 30 MHz ~ 6 GHz SF-2 N
5:2013 Test configurations, CE: 150 kHz ~ 30 MHz
for field devices with
IEC 61784-1, CP 3/2
272/433
No. KT393

Electrical
EN 61326-2- materials and requirements – 10 V/m SF-3 N
5:2013 Test configurations, EFT: ±2 kV
for field devices with 10 V
interfaces according to V-DIP: max 100 %
IEC 61784-1, CP 3/2

Electrical 10 V/m
EN 61326-2- materials and requirements – EFT: ±2 kV SF-1 N
interfaces according to M/F: 30 A/m
IEC 61784-1, CP 3/2

measurement, control RS: 80 MHz ∼ 2.7
Electrical GHz, 10 V/m
EN 61326-2- materials and EMC requirements – EFT: ±1 kV BS N
6:2013 Part 2-6: Particular
components requirements SURGE: ±2 kV
- In vitro CS: 150 kHz ∼ 80
diagnostic (IVD) medical MHz, 10 V

Electrical
EN 61326-2- materials and EMC requirements – RE: 30 MHz ∼ 6 GHz SF-2 N
6:2013 Part 2-6: Particular CE: 150 kHz ∼ 30 MHz
equipment

Electrical equipment for CE: 150 kHz ∼ 30 MHz
ESD: ±8 kV
measurement, control RS: 80 MHz ∼ 2.7
EN 61326-2- materials and EMC requirements – EFT: ±1 kV SF-1 N
6:2013 components Part 2-6: Particular SURGE: ±2 kV
requirements - In vitro
diagnostic (IVD) medical CS: 150 kHz ∼ 80
MHz, 10 V
equipment M/F: 3 A/m
V-DIP: max 100 %
273/433
No. KT393

Electrical equipment for CE: 150 kHz ∼ 30 MHz
and laboratory use – RS: 80 MHz ∼ 2.7
Electrical
EN 61326-2- materials and EMC requirements – GHz, 10 V/m SF-3 N
6:2013 Part 2-6: Particular EFT: ±1 kV
components requirements - In vitro SURGE: ±2 kV
diagnostic (IVD) medical CS: 150 kHz ∼ 80
equipment MHz, 10 V
V-DIP: max 100 %
ESD: ±8 kV
materials and lighting purposes - EMC EFT: ±1 kV
EN 61547:2009 BS N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
EN 61547:2009 materials and lighting purposes - EMC Surge: ±2 kV SF-1 N
3V
V-DIP: max 100 %
M/F: 1 A/m
ESD: ±8 kV
EN 61547:2009 SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %

ESD: ±8 kV
Uninterruptible power RS: 80 MHz ~ 1 GHz
systems (UPS)
Electrical 10 V/m
EN 62040- – Part 2:
2:2006/AC:2006 Electromagnetic
compatibility (EMC) CS: 150 kHz ~ 80 MHz
requirements 10 V
V-DIP: max 100 %
systems (UPS)
Electrical
EN 62040- materials and –Electromagnetic
Part 2: CE: 150 kHz ~ 30 MHz SF-2 N
2:2006/AC:2006 RE: 30 MHz ~ 1 GHz
requirements
274/433
No. KT393

RE: 30 MHz ~ 1 GHz
Uninterruptible power ESD: ±8 kV
systems (UPS) RS: 80 MHz ~ 1 GHz
Electrical
Part 2: 10 V/m SF-1 N
2:2006/AC:2006 EFT: ±2 kV
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 1 GHz

Electrical
Part 2: 10 V/m SF-3 N
2:2006/AC:2006 EFT: ±2 kV
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 1 GHz

Electrical
materials and –Electromagnetic
Part 2: 10 V/m
EN 62040-2:2018 SF-1 N
EFT: ±2 kV
10 V
V-DIP: max 100 %
systems (UPS)
Electrical
Part 2: CE: 150 kHz ~ 30 MHz
EN 62040-2:2018 SF-2 N
RE: 30 MHz ~ 1 GHz
requirements

ESD: ±8 kV
systems (UPS)
Electrical 10 V/m
Part 2:
EN 62040-2:2018 EFT: ±2 kV BS N
requirements 10 V
V-DIP: max 100 %
RE: 30 MHz ~ 1 GHz

Electrical
Part 2: 10 V/m
EN 62040-2:2018 SF-3 N
EFT: ±2 kV
10 V
V-DIP: max 100 %
275/433
No. KT393

Electromagnetic
compatibility -
EN IEC 55014- materials and household appliances, BS N
1:2021 components electric tools and similar CE: 150 kHz ~ 30 MHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
EN IEC 55014- RE: 30 MHz ~ 6 GHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
apparatus
- Part 1: Emission
Electrical
EN IEC 55014- materials and household appliances, EFT: ±1 kV BS N
2:2021 components apparatus and similar
CS: 150 kHz ∼ 230
Electrical
EN IEC 55014- materials and household appliances, EFT: ±1 kV SF-1 N
CS: 150 kHz ∼ 230
Electrical
EN IEC 55014- materials and household appliances, EFT: ±1 kV SF-3 N
CS: 150 kHz ∼ 230
276/433
No. KT393

EN IEC Electrical RE: 9 kHz ∼ 1 000
equipment

characteristics of
equipment

equipment

EN IEC Electrical
55015:2019 + materials and disturbance BS N
A11:2020 electrical lighting similar
equipment
voltage changes,
EN IEC 61000-3- materials and voltage supply systems Flicker: 16 A ＜ I ≤ 75 A SF-1 N
11:2019 components – Equipment with rated
current ≤75 A and
subject to conditional
connection
voltage changes,
EN IEC 61000-3- materials and voltage supply systems Flicker: 16 A ＜ I ≤ 75 A SF-3 N
11:2019 components – Equipment with rated
current ≤75 A and
connection
Limits for harmonic

EN IEC 61000-3- materials and (equipment input Harmonic: max 16A SF-1 N
2_2019 components current ≤ 16 A per
phase)
Limits for harmonic

EN IEC 61000-3- materials and (equipment input Harmonic: max 16A SF-2 N
2_2019 components current ≤ 16 A per
phase)
277/433
No. KT393

Limits for harmonic
EN IEC 61000-3- materials and (equipment input SF-3 N
2_2019 Harmonic: max 16A
components current ≤ 16 A per
phase)
Testing and
measurement
EN IEC 61000-4- materials and and voltage variations V-DIP: max 100 % BS N
11:2020 components immunity tests for
phase
Testing and
measurement
EN IEC 61000-4- materials and and voltage variations V-DIP: max 100 % SF-1 N
phase
Testing and
measurement
EN IEC 61000-4- materials and and voltage variations V-DIP: max 100 % SF-3 N
phase
ESD: ±8 kV
Electrical 6-1: Generic standards-
EN IEC 61000-6-1 EFT: ±1 kV
materials and Immunity standard for SF-3 N
: 2019 SURGE: ±2 kV
components residential, commercial CS: 150 kHz ∼ 80
ESD: ±8 kV
EN IEC 61000-6-1 materials and Immunity standard for SURGE: ±2 kV BS N
: 2019 components residential, commercial CS: 150 kHz ∼ 80
V-DIP: max 100 %
278/433
No. KT393

ESD: ±8 kV
EN IEC 61000-6-1 materials and Immunity standard for SURGE: ±2 kV SF-1 N
: 2019 components residential, commercial CS: 150 kHz ∼ 80
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic
Electrical
EN IEC 61000-6-2 EFT: ±1 kV
: 2019 components Immunity for industrial CS: 150 ±2 kV
kHz ∼ 80
V-DIP: max 100 %
ESD: ±8 kV
EN IEC 61000-6-2 materials and 6-2: Generic standards- SURGE: ±2 kV BS N
: 2019 components Immunity for industrial CS: 150 kHz ∼ 80
M/F: 3 A/m
V-DIP: max 100 %
ESD: ±8 kV
EN IEC 61000-6-2 materials and 6-2: Generic standards- SURGE: ±2 kV SF-1 N
: 2019 components Immunity for industrial CS: 150 kHz ∼ 80
M/F: 30 A/m
V-DIP: max 100 %
Electromagnetic
compatibility (EMC)
Electrical
EN IEC 61000-6- materials and –standards
4:2019 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
4:2019 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
4:2019 CE : 9 kHz ∼ 30 MHz
279/433
No. KT393

Electromagnetic
compatibility (EMC)
Electrical
4:2019 CE : 9 kHz ∼ 30 MHz
RE: 30 MHz ~ 6 GHz

RS: 80 MHz ~ 6 GHz
Electrical 10 V/m
EN IEC 61326- materials and and laboratory use –
requirements – Part EFT: ±2 kV SF-1 N
1:2021 EMC
requirements 10 V
V-DIP: max 100 %
M/F: 30 A/m
RE: 30 MHz ~ 6 GHz

Electrical
EN IEC 61326- materials and EMC requirements – Part 10
and laboratory use – V/m SF-3 N
1:2021 EFT: ±2 kV
10 V
V-DIP: max 100 %

Electrical
EN IEC 61326- materials and and laboratory use – RE: 30 MHz ~ 6 GHz SF-2 N
1:2021 EMC requirements – Part CE: 150 kHz ~ 30 MHz
requirements

RS: 80 MHz ~ 6 GHz
Electrical 10 V/m
EN IEC 61326- materials and and laboratory use –
requirements – Part EFT: ±2 kV BS N
1:2021 components EMC Surge: ±2 kV
1 : General CS: 150 kHz ~ 80 MHz
requirements 10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

Electrical
EN IEC 61326-2- materials and EMC requirements – 10 V/m SF-3 N
equipment 10 V
V-DIP: max 100 %
280/433
No. KT393

RE: 30 MHz ~ 6 GHz
ESD: ±15 kV
Electrical 10 V/m
EN IEC 61326-2- materials and EMC requirements – EFT: ±2 kV SF-1 N
6:2021 components Part 2-6: Particular Surge: ±2 kV
requirements - In vitro
10 V
M/F: 30 A/m

Electrical
EN IEC 61326-2- materials and EMC requirements – RE: 30 MHz ~ 6 GHz SF-2 N
6:2021 Part 2-6: Particular CE: 150 kHz ~ 30 MHz
equipment

Electrical 10 V/m
EN IEC 61326-2- materials and EMC requirements – EFT: ±2 kV BS N
6:2021 components Part 2-6: Particular Surge: ±2 kV
requirements - In vitro CS: 150 kHz ~ 80 MHz
RE: 30 MHz ~ 6 GHz

Adjustable speed ESD: ±8 kV
electrical power drive RS: 80 MHz ~ 2.7 GHz
Electrical
EN IEC 61800- materials and systems 10 V/m SF-1 N
3:2018 components Part 3: EMC EFT: ±2 kV
requirements and Surge: ±2 kV
specific test methods CS: 150 kHz ~ 80 MHz
3V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

Electrical
EN IEC 61800- materials and systems 10 V/m SF-3 N
3:2018 components Part 3: EMC EFT: ±2 kV
3V
V-DIP: max 100 %
281/433
No. KT393

ESD: ±8 kV
Adjustable speed RS: 80 MHz ~ 2.7 GHz
electrical power drive
Electrical 10 V/m
EN IEC 61800- materials and systems EFT: ±2 kV BS N
3:2018 components Part 3: EMC Surge: ±2 kV
requirements and CS: 150 kHz ~ 80 MHz
specific test methods 3V
V-DIP: max 100 %
Adjustable speed
Electrical
EN IEC 61800- materials and systems CE: 150 kHz ~ 30 MHz SF-2 N
3:2018 components Part 3: EMC RE: 30 MHz ~ 6 GHz
requirements and
specific test methods

Electrical
EN55020 : 2007 materials and associated equipment – S5 : 900 MHz 3 V/m SF-3 N
+A12 : 2016 Immunity characteristics
components – Limits and methods of EFT : ±1 kV
measurement

Electrical
EN55020 : 2007 materials and associated equipment – S5 : 900 MHz 3 V/m SF-1 N
+A12 : 2016 Immunity characteristics
components – Limits and methods of EFT : ±1 kV
measurement

Electrical
EN55020 : 2007 materials and associated equipment – S5 : 900 MHz 3 V/m BS N
+A12 : 2016 Immunity characteristics EFT : ±1 kV
components – Limits and methods of S1, s2a, s2b, S3, S4
measurement
282/433
No. KT393

RE : 100 kHz ∼ 2.5
GHz
CE(Voltage Method) :
100 kHz ∼ 108 MHz
CE(Current Method) :
100 kHz ∼ 108 MHz
MFE: 20 Hz ∼ 200 kHz
CTI(Supply lines) : (-
150 ∼ +100) V
CTI(Signal lines) : (-60
HYUNDAI-KIA Motor ∼ 40) V
Electrical Company - CE(AC Power) : 150
ES96200-00:19th materials and ELECTROMAGNETIC SF-1 N
kHz ∼ 30 MHz
components COMPATIBILITY CE(TEL) : 150 kHz ∼
SPECIFICATION 30 MHz
Harmonic Current
Emission : up to 16 A
Voltage Fluctuation
and Flicker : up to 16 A
Electrical Fast
Transient/Burst : Max
±2.2 kV
Surge Transient : Max
±2.2 kV
RI(ALSE) : 20 MHz ∼ 3
GHz, 100 V/m
Portable Transmitters :
(146 ∼ 5 885) MHz,
HYUNDAI-KIA Motor 14 W
Electrical Company - RE : 100 kHz ∼ 2.5
ES96200-00:19th materials and ELECTROMAGNETIC SF-2 N
GHz
components COMPATIBILITY CE(Voltage Method) :
SPECIFICATION 100 kHz ∼ 108 MHz
100 kHz ∼ 108 MHz
MFE: 20 Hz ∼ 200 kHz
BCI : (1 ∼ 400) MHz,

200 mA
RE : 100 kHz ∼ 2.5
GHz
100 kHz ∼ 108 MHz
HYUNDAI-KIA Motor CE(Current Method) :
Electrical Company - 100 kHz ∼ 108 MHz
ES96200-00:19th materials and ELECTROMAGNETIC MFI : (DC(0) ∼ 150) BS N
components COMPATIBILITY kHz, 180 dBμA/m
SPECIFICATION MFE: 20 Hz ∼ 200 kHz
CTI(Supply lines) : (-
150 ~ +100) V
CTI(Signal lines) : (-60
~ 40) V
VTE : -100 V, +75 V
ESD : Max ±25 kV
283/433
No. KT393

BCI : (20 ∼ 400) MHz,
100 mA
ALSE : 80 MHz ∼ 2
GHz, 100 V/m
GSM : 900 MHz, 1 800
HYUNDAI-KIA Motor MHz, 1 900 MHz
ES96202-01:2016 materials and ELECTROMAGNETIC GHz BS N
components COMPATIBILITY CE(Power Line) : 100
SPECIFICATION (24 V) kHz ∼ 108 MHz
CTI(Power Line) : (-600
∼ +200) V
CTI(Signal lines) : ±80 V
ESD : Max ±25 kV
VTE : -450 V, +150 V
RE : 100 kHz ∼ 2.5

HYUNDAI-KIA Motor GHz
Electrical Company - CE(Power Line) : 100
ES96202-01:2016 materials and ELECTROMAGNETIC kHz ∼ 108 MHz SF-1 N
components COMPATIBILITY CTI(Power Line) : (-600
SPECIFICATION (24 V) ∼ +200) V
CTI(Signal lines) : ±80 V
ALSE : 80 MHz ∼ 2
HYUNDAI-KIA Motor GHz, 100 V/m
ES96202-01:2016 materials and ELECTROMAGNETIC SF-2 N
GHz
components COMPATIBILITY CE(Power Line) : 100
SPECIFICATION (24 V) kHz ∼ 108 MHz
Telecommunication
Electrical network equipment; CE : 150 kHz ∼ 30
ETSI EN 300 386 materials and ElectroMagnetic MHz SF-2 N
V2.1.1 (2016-07) components Compatibility (EMC) RE : 30 MHz ∼ 6 GHz
requirements
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30
MHz
Telecommunication ESD : ±8 kV
Electrical network equipment; RS : 80 MHz ∼ 6 GHz
ETSI EN 300 386 materials and ElectroMagnetic 10 V/m SF-3 N
V2.1.1 (2016-07) components Compatibility (EMC) EFT : ±1 kV
requirements SURGE : ±2 kV
CS : 150 kHz ∼ 80
MHz 3 V
V-DIP : (0 ∼ 100) %
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30
MHz
Telecommunication ESD : ±8 kV
Electrical network equipment; RS : 80 MHz ∼ 6 GHz
ETSI EN 300 386 materials and ElectroMagnetic 10 V/m SF-1 N
V2.1.1 (2016-07) components Compatibility (EMC) EFT : ±1 kV
requirements SURGE : ±2 kV
CS : 150 kHz ∼ 80
MHz 3 V
V-DIP : (0 ∼ 100) %
284/433
No. KT393

CE : 150 kHz ∼ 30
MHz
ESD : ±8 kV
Telecommunication RS : 80 MHz ∼ 6 GHz
Electrical network equipment;
ETSI EN 300 386 10 V/m
materials and ElectroMagnetic BS N
V2.1.1 (2016-07) EFT : ±1 kV
components Compatibility (EMC) SURGE : ±2 kV
requirements CS : 150 kHz ∼ 80
MHz 3 V
V-DIP : (0 ∼ 100) %
Electromagnetic
spectrum Matters
(ERM);
ETSI EN 301 489-1 Electrical
materials and ElectroMagnetic CE: 150 kHz ~ 30 MHz
V2.1.1 SF-2 N
Compatibility (EMC) RE: 30 MHz ~ 6 GHz
(2017-02) components standard for radio
equipment and services;
Part 1: Common
technical requirements

compatibility and Radio ESD: ±8 kV
spectrum Matters RS: 80 MHz ~ 6 GHz 3
(ERM);
ETSI EN 301 489-1 Electrical V/m
V2.1.1 materials and ElectroMagnetic EFT: ±1 kV BS N
components Compatibility (EMC)
(2017-02) Surge: ±2 kV
standard for radio CS: 150 kHz ~ 80 MHz
equipment and services; 3V
Part 1: Common V-DIP: max 100 %
Electromagnetic RE: 30 MHz ~ 6 GHz

compatibility and Radio CE: 150 kHz ~ 30 MHz
spectrum Matters ESD: ±8 kV
(ERM); RS: 80 MHz ~ 6 GHz 3
materials and ElectroMagnetic V/m
V2.1.1 SF-3 N
components Compatibility (EMC) EFT: ±1 kV
(2017-02) standard for radio Surge: ±2 kV
equipment and services; CS: 150 kHz ~ 80 MHz
Part 1: Common 3V
technical requirements V-DIP: max 100 %

V2.1.1 SF-1 N
(2017-02) standard for radio Surge: ±2 kV
Part 1: Common 3V
285/433
No. KT393

RE: 30 MHz ~ 6 GHz
standard for radio RS: 80 MHz ~ 6 GHz 3
Electrical equipment and services;
ETSI EN 301 489-1 materials V/m
and Part1: Common SF-1 N
V2.2.3 (2019-11) EFT: ±1 kV
components technical requirements; Surge: ±2 kV
Harmonised Standard CS: 150 kHz ~ 80 MHz
for ElectroMagnetic 3V
Compatibility V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

ETSI EN 301 489-1 materials and equipment
Electrical and services; V/m
Part1: Common SF-3 N
V2.2.3 (2019-11) EFT: ±1 kV
components technical requirements; Surge: ±2 kV
Electromagnetic
compatibility(EMC)
standard for radio
Electrical and services; CE: 150 kHz ~ 30 MHz
Part1: Common SF-2 N
V2.2.3 (2019-11) components technical requirements; RE: 30 MHz ~ 6 GHz
Harmonised Standard
for ElectroMagnetic
Compatibility

Electrical and services; V/m
Part1: Common EFT: ±1 kV BS N
V2.2.3 (2019-11) components technical requirements; Surge: ±2 kV

Specific conditions for ESD: ±8 kV
2.4 GHz wide band RS: 80 MHz ~ 2.7 GHz
transmission systems
Electrical 3 V/m
ETSI EN 301 489- materials and and 5 GHz high EFT: ±1 kV BS N
17 V2.2.1 performance RLAN
components equipment and Surge: ±2 kV
5.8GHz CS: 150 kHz ~ 80 MHz
Broadband Data 3V
Transmitting System V-DIP: max 100 %
286/433
No. KT393

RE: 30 MHz ~ 6 GHz
Specific conditions for CE: 150 kHz ~ 30 MHz
2.4 GHz wide band ESD: ±8 kV
transmission systems RS: 80 MHz ~ 2.7 GHz
Electrical
ETSI EN 301 489- materials and and 5 GHz high 3 V/m SF-3 N
17 V2.2.1 performance RLAN EFT: ±1 kV
components equipment and 5.8GHz Surge: ±2 kV
Broadband Data CS: 150 kHz ~ 80 MHz
Transmitting System 3V
V-DIP: max 100 %
Specific conditions for

2.4 GHz wide band
transmission systems
Electrical
ETSI EN 301 489- materials and and 5 GHz high CE: 150 kHz ~ 30 MHz SF-2 N
17 V2.2.1 performance RLAN
components equipment and 5.8GHz
Broadband Data
Transmitting System
RE: 30 MHz ~ 6 GHz

Specific conditions for CE: 150 kHz ~ 30 MHz
2.4 GHz wide band ESD: ±8 kV
transmission systems RS: 80 MHz ~ 2.7 GHz
Electrical
ETSI EN 301 489- materials and and 5 GHz high 3 V/m SF-1 N
17 V2.2.1 performance RLAN EFT: ±1 kV
components equipment and 5.8GHz Surge: ±2 kV
Transmitting System 3V
V-DIP: max 100 %

ElectroMagnetic ESD: ±8 kV
Compatibility (EMC) RS: 80 MHz ~ 6 GHz 3
standard for radio
ETSI EN 301 489- Electrical V/m
materials and equipment and services;
17 V3.2.0(2017- EFT: ±1 kV BS N
components Part 17: specific
03) Surge: ±2 kV
conditions for CS: 150 kHz ~ 80 MHz
Broadband Data 3V
Transmission Systems V-DIP: max 100 %
ElectroMagnetic
Compatibility (EMC)
standard for radio
ETSI EN 301 489- Electrical
materials and equipment and services; CE: 150 kHz ~ 30 MHz
17 V3.2.0(2017- SF-2 N
Part 17: specific RE: 30 MHz ~ 6 GHz
03) components conditions for
Broadband Data
Transmission Systems
RE: 30 MHz ~ 6 GHz

ElectroMagnetic CE: 150 kHz ~ 30 MHz
Compatibility (EMC) ESD: ±8 kV
materials and equipment and services; V/m
17 V3.2.0(2017- SF-1 N
Part 17: specific EFT: ±1 kV
03) components conditions for Surge: ±2 kV
Transmission Systems 3V
V-DIP: max 100 %
287/433
No. KT393

RE: 30 MHz ~ 6 GHz
materials and equipment and services; V/m
17 V3.2.0(2017- SF-3 N
Part 17: specific EFT: ±1 kV
03) components conditions for Surge: ±2 kV
Transmission Systems 3V
V-DIP: max 100 %
Compatibility (EMC) RS: 80 MHz ∼ 6 GHz,
standard for radio 10 V/m
materials and equipment and services; EFT: ±1 kV
17 V3.2.4 (2020- SF-3 N
Part 17: specific SURGE: ±2 kV
09) components conditions CS: 150 kHz ∼ 80
for Broadband Data MHz, 10 V
ESD: ±8 kV
ElectroMagnetic RS: 80 MHz ∼ 6 GHz,
Compatibility (EMC) 3 V/m
standard for radio
ETSI EN 301 489- Electrical EFT: ±1 kV
17 V3.2.4 (2020- SURGE: ±2 kV SF-1 N
Part 17: specific
MHz, 10 V
for Broadband Data M/F: 30 A/m
ESD: ±8 kV
ElectroMagnetic RS: 80 MHz ∼ 6 GHz,
Compatibility (EMC) 3 V/m
standard for radio
ETSI EN 301 489- Electrical EFT: ±1 kV
17 V3.2.4 (2020- SURGE: ±2 kV BS N
Part 17: specific
MHz, 10 V
for Broadband Data M/F: 30 A/m
ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 17: Specific
materials and conditions for CE: 150 kHz ~ 30 MHz
17 V3.2.5(2022- SF-2 N
Broadband and RE: 30 MHz ~ 6 GHz
08) components Wideband Data
Transmission Systems;
Harmonised Standard
for ElectroMagnetic
Compatibility
288/433
No. KT393

ElectroMagnetic
Compatibility (EMC) CE: 150 kHz ~ 30 MHz
standard for radio ESD: ±8 kV
equipment and services; RS: 80 MHz ~ 6 GHz 3
Part 17: Specific
materials and conditions for
17 V3.2.5(2022- EFT: ±1 kV BS N
Broadband and
08) components Wideband Data Surge: ±2 kV
Transmission Systems; 3V
Harmonised Standard V-DIP: max 100 %
for ElectroMagnetic
Compatibility
ElectroMagnetic
standard for radio CE: 150 kHz ~ 30 MHz
equipment and services; ESD: ±8 kV
Part 17: Specific RS: 80 MHz ~ 6 GHz 3
materials and conditions for V/m
17 V3.2.5(2022- SF-1 N
Broadband and EFT: ±1 kV
Transmission Systems; CS: 150 kHz ~ 80 MHz
Harmonised Standard 3V
for ElectroMagnetic V-DIP: max 100 %
Compatibility
ElectroMagnetic
materials and conditions for V/m
17 V3.2.5(2022- SF-3 N
Broadband and EFT: ±1 kV
Transmission Systems; CS: 150 kHz ~ 80 MHz
Compatibility
ElectroMagnetic
Compatibility (EMC)
conditions for Receive
materials and Only Mobile Earth
19 V2.1.1(2019- EFT: ±1 kV BS N
Stations (ROMES)
04) components operating Surge: ±2 kV
in the 1,5 CS: 150 kHz ~ 80 MHz
GHz band operating in 3V
the RNSS band V-DIP: max 100 %
(ROGNSS) providing
positioning, navigation,
and timing data
289/433
No. KT393

ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 19: Specific
materials and Only Mobile Earth CE: 150 kHz ~ 30 MHz
19 V2.1.1(2019- SF-2 N
Stations (ROMES) RE: 30 MHz ~ 6 GHz
04) components operating in the 1,5
GHz band operating in
the RNSS band
(ROGNSS) providing
and timing data
ElectroMagnetic
Compatibility (EMC)
standard for radio RE: 30 MHz ~ 6 GHz
equipment and services; CE: 150 kHz ~ 30 MHz
Part 19: Specific ESD: ±8 kV
conditions for Receive RS: 80 MHz ~ 6 GHz 3
materials and Only Mobile Earth V/m
19 V2.1.1(2019- SF-1 N
Stations (ROMES) EFT: ±1 kV
04) components operating in the 1,5 Surge: ±2 kV
GHz band operating in CS: 150 kHz ~ 80 MHz
the RNSS band 3V
(ROGNSS) providing V-DIP: max 100 %
and timing data
ElectroMagnetic
Compatibility (EMC)
standard for radio RE: 30 MHz ~ 6 GHz
equipment and services; CE: 150 kHz ~ 30 MHz
conditions for Receive RS: 80 MHz ~ 6 GHz 3
materials and Only Mobile Earth V/m
19 V2.1.1(2019- SF-3 N
Stations (ROMES) EFT: ±1 kV
04) components operating in the 1,5 Surge: ±2 kV
GHz band operating in CS: 150 kHz ~ 80 MHz
the RNSS band 3V
(ROGNSS) providing V-DIP: max 100 %
and timing data
290/433
No. KT393

ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 19: Specific RE: 30 MHz ∼ 6 GHz
conditions for Receive CE: 150 kHz ∼ 30 MHz
Only Mobile Earth ESD: ±8 kV
Stations (ROMES) RS: 80 MHz ∼ 6 GHz 3
ETSI EN 301 489- Electrical operating in the 1,5 V/m
19 V2.2.1(2022- materials and GHz band providing SF-1 N
EFT: ±1 kV
09) components data communications Surge: ±2 kV
and GNSS receivers CS: 150 kHz ∼ 80 MHz
operating in the RNSS 3V
band providing V-DIP: max 100 %
and timing data;
Harmonised Standard
for ElectroMagnetic
Compatibility
ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 19: Specific
19 V2.2.1(2022- materials and GHz band providing EFT: ±1 kV BS N
and timing data;
Harmonised Standard
for ElectroMagnetic
Compatibility
ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 19: Specific RE: 30 MHz ∼ 6 GHz
EFT: ±1 kV
and timing data;
Harmonised Standard
for ElectroMagnetic
Compatibility
291/433
No. KT393

ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 19: Specific
Only Mobile Earth
Stations (ROMES)
ETSI EN 301 489- Electrical operating in the 1,5 RE: 30 MHz ∼ 6 GHz
09) components data communications
and GNSS receivers
operating in the RNSS
band providing
and timing data;
Harmonised Standard
for ElectroMagnetic
Compatibility
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
Specific conditions for RS: 80 MHz ~ 2.7 GHz
Electrical CDMA 1x spread
ETSI EN 301 489- 3 V/m
materials and spectrum Mobile SF-3 N
25 V2.3.2 EFT: ±1 kV
components Stations and ancillary Surge: ±2 kV
equipment CS: 150 kHz ~ 80 MHz
3V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
ETSI EN 301 489- 3 V/m
25 V2.3.2 EFT: ±1 kV
components Stations and ancillary Surge: ±2 kV
3V
V-DIP: max 100 %
Specific conditions for

ETSI EN 301 489- RE: 30 MHz ~ 6 GHz
25 V2.3.2 CE: 150 kHz ~ 30 MHz
components Stations and ancillary
equipment

ESD: ±8 kV
Electrical CDMA 1x spread 3 V/m
ETSI EN 301 489- materials and spectrum Mobile EFT: ±1 kV BS N
25 V2.3.2 components Stations and ancillary Surge: ±2 kV
3V
V-DIP: max 100 %
292/433
No. KT393

Electromagnetic
spectrum Matters CE: 150 kHz ~ 30 MHz
(ERM); ESD: ±8 kV
ElectroMagnetic RS: 80 MHz ~ 2.7 GHz
Compatibility (EMC)
Electrical 3 V/m
ETSI EN 301 489-3 materials and standard for radio EFT: ±1 kV BS N
V1.4.1 equipment and services;
components Part 3: Specific Surge: ±2 kV
conditions for Short- 3V
Range Devices (SRD) V-DIP: max 100 %
operating on
frequencies between 9
kHz and 40 GHz
Electromagnetic
spectrum Matters
(ERM);
ElectroMagnetic
Compatibility (EMC)
Electrical
ETSI EN 301 489-3 materials and standard for radio CE: 150 kHz ~ 30 MHz SF-2 N
V1.4.1 equipment and services; RE: 30 MHz ~ 6 GHz
components Part 3: Specific
conditions for Short-
Range Devices (SRD)
operating on
kHz and 40 GHz
Electromagnetic
spectrum Matters RE: 30 MHz ~ 6 GHz
(ERM); CE: 150 kHz ~ 30 MHz
Compatibility (EMC) RS: 80 MHz ~ 2.7 GHz
Electrical
ETSI EN 301 489-3 materials and standard for radio 3 V/m SF-1 N
V1.4.1 equipment and services; EFT: ±1 kV
conditions for Short- CS: 150 kHz ~ 80 MHz
Range Devices (SRD) 3V
operating on V-DIP: max 100 %
kHz and 40 GHz
Electromagnetic
spectrum Matters RE: 30 MHz ~ 6 GHz
(ERM); CE: 150 kHz ~ 30 MHz
Electrical
ETSI EN 301 489-3 materials and standard for radio 3 V/m SF-3 N
V1.4.1 equipment and services; EFT: ±1 kV
conditions for Short- CS: 150 kHz ~ 80 MHz
Range Devices (SRD) 3V
operating on V-DIP: max 100 %
kHz and 40 GHz
293/433
No. KT393

equpment and services;
Electrical V/m
ETSI EN 301 489-3 materials and Part 3: Specific EFT: ±1 kV BS N
V2.1.1(2019-03) conditions for Short-
components Range Devices Surge: ±2 kV
(SRD) CS: 150 kHz ~ 80 MHz
operating on 3V
frequencies between 9 V-DIP: max 100 %
kHz and 246 GHz
ElectroMagnetic
Compatibility (EMC)
standard for radio
equpment and services;
Electrical
ETSI EN 301 489-3 materials and Part 3: Specific CE: 150 kHz ~ 30 MHz SF-2 N
V2.1.1(2019-03) conditions for Short- RE: 30 MHz ~ 6 GHz
components Range Devices (SRD)
operating on
kHz and 246 GHz
ElectroMagnetic RE: 30 MHz ~ 6 GHz

equpment and services; RS: 80 MHz ~ 6 GHz 3
Electrical
ETSI EN 301 489-3 materials and Part 3: Specific V/m SF-3 N
V2.1.1(2019-03) conditions for Short- EFT: ±1 kV
components Range Devices (SRD) Surge: ±2 kV
operating on CS: 150 kHz ~ 80 MHz
frequencies between 9 3V
kHz and 246 GHz V-DIP: max 100 %

equpment and services; RS: 80 MHz ~ 6 GHz 3
Electrical
ETSI EN 301 489-3 materials and Part 3: Specific V/m SF-1 N
V2.1.1(2019-03) conditions for Short- EFT: ±1 kV
components Range Devices (SRD) Surge: ±2 kV
operating on CS: 150 kHz ~ 80 MHz
frequencies between 9 3V
kHz and 246 GHz V-DIP: max 100 %

ETSI EN 301 489- Electrical standard for radio V/m
34 V2.1.1 (2017- materials and equipment and services; EFT: ±1 kV BS N
04) components Part 34: Specific Surge: ±2 kV
conditions for External CS: 150 kHz ~ 80 MHz
Power Supply (EPS) for 3V
mobile phones V-DIP: max 100 %
294/433
No. KT393

ElectroMagnetic
Compatibility (EMC)
ETSI EN 301 489- Electrical standard for radio
materials and equipment and services; CE: 150 kHz ~ 30 MHz
34 V2.1.1 (2017- SF-2 N
RE: 30 MHz ~ 6 GHz
04) components Part 34: Specific
conditions for External
Power Supply (EPS) for
mobile phones
RE: 30 MHz ~ 6 GHz

34 V2.1.1 (2017- materials and equipment and services; V/m SF-3 N
EFT: ±1 kV
conditions for External Surge: ±2 kV
Power Supply (EPS) for 3 V
RE: 30 MHz ~ 6 GHz

34 V2.1.1 (2017- materials and equipment and services; V/m SF-1 N
EFT: ±1 kV
conditions for External Surge: ±2 kV
Power Supply (EPS) for 3 V
ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 50: Specific
materials and conditions for Cellular RE: 30 MHz ∼ 6 GHz
50 V2.2.2(2020- SF-2 N
Communication Base CE: 150 kHz ∼ 30 MHz
12) components Station (BS), repeater
and ancillary equipment;
Harmonised Standard
for ElectroMagnetic
Compatibility
ElectroMagnetic
Compatibility (EMC) RE: 30 MHz ∼ 6 GHz
standard for radio CE: 150 kHz ∼ 30 MHz
Part 50: Specific RS: 80 MHz ∼ 6 GHz
materials and conditions for Cellular 10 V/m
50 V2.2.2(2020- SF-1 N
Communication Base EFT: ±1 kV
12) components Station (BS), repeater Surge: ±2 kV
and ancillary equipment; CS: 150 kHz ∼ 80 MHz
Compatibility
295/433
No. KT393

ElectroMagnetic
Compatibility (EMC) CE: 150 kHz ∼ 30 MHz
equipment and services; RS: 80 MHz ∼ 6 GHz
Part 50: Specific
ETSI EN 301 489- Electrical 10 V/m
materials and conditions for Cellular
50 V2.2.2(2020- EFT: ±1 kV BS N
Communication Base
and ancillary equipment; 3V
for ElectroMagnetic
Compatibility
ElectroMagnetic
50 V2.2.2(2020- SF-3 N
Communication Base EFT: ±1 kV
Compatibility
ElectroMagnetic
Compatibility (EMC)
Part 51: Specific RS: 80 MHz ~ 6 GHz
conditions for
materials and Automotive, Ground
51 V2.1.1(2019- EFT: ±1 kV BS N
based Vehicles and
04) components Surveillance Radar Surge: ±2 kV
Devices using 24,05 3V
GHz to 24,25 GHz, V-DIP: max 100 %
24,05 GHz to 24,5 GHz,
76 GHz to 77 GHz and
77 GHz to 81 GHz;
ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 51: Specific
conditions for
materials and Automotive, Ground CE: 150 kHz ∼ 30 MHz
51 V2.1.1(2019- SF-2 N
based Vehicles and RE: 30 MHz ∼ 6 GHz
04) components Surveillance Radar
Devices using 24,05
GHz to 24,25 GHz,
24,05 GHz to 24,5 GHz,
77 GHz to 81 GHz;
296/433
No. KT393

ElectroMagnetic
Compatibility (EMC)
standard for radio RE: 30 MHz ∼ 6 GHz
equipment and services; CE: 150 kHz ∼ 30 MHz
conditions for RS: 80 MHz ~ 6 GHz
materials and Automotive, Ground 10 V/m
51 V2.1.1(2019- SF-1 N
based Vehicles and EFT: ±1 kV
Devices using 24,05 CS: 150 kHz ~ 80 MHz
GHz to 24,25 GHz, 3V
24,05 GHz to 24,5 GHz, V-DIP: max 100 %
77 GHz to 81 GHz;
ElectroMagnetic
Compatibility (EMC)
standard for radio RE: 30 MHz ∼ 6 GHz
equipment and services; CE: 150 kHz ∼ 30 MHz
conditions for RS: 80 MHz ~ 6 GHz
materials and Automotive, Ground 10 V/m
51 V2.1.1(2019- SF-3 N
based Vehicles and EFT: ±1 kV
Devices using 24,05 CS: 150 kHz ~ 80 MHz
GHz to 24,25 GHz, 3V
24,05 GHz to 24,5 GHz, V-DIP: max 100 %
77 GHz to 81 GHz;
ElectroMagnetic
52 V1.1.2(2020- BS N
Communication User EFT: ±1 kV
12) components Equipment (UE) radio Surge: ±2 kV
Compatibility
ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 52: Specific
materials and conditions for Cellular RE: 30 MHz ∼ 6 GHz
52 V1.1.2(2020- SF-2 N
Communication User CE: 150 kHz ∼ 30 MHz
12) components Equipment (UE) radio
Harmonised Standard
for ElectroMagnetic
Compatibility
297/433
No. KT393

ElectroMagnetic
52 V1.1.2(2020- SF-3 N
Compatibility
ElectroMagnetic
52 V1.1.2(2020- SF-1 N
Compatibility
ElectroMagnetic
equipment and services; RS: 80 MHz ~ 6 GHz
Part 52: Specific
materials and conditions for Cellular
52 V1.2.1(2021- EFT: ±1 kV BS N
Communication User
and ancillary equipment; 3V
for ElectroMagnetic
Compatibility
ElectroMagnetic
52 V1.2.1(2021- SF-1 N
and ancillary equipment; CS: 150 kHz ~ 80 MHz
Compatibility
298/433
No. KT393

ElectroMagnetic
Compatibility (EMC)
standard for radio
Part 52: Specific
materials and conditions for Cellular RE: 30 MHz ~ 6 GHz
52 V1.2.1(2021- SF-2 N
Communication User CE: 150 kHz ~ 30 MHz
11) components Equipment (UE) radio
Harmonised Standard
for ElectroMagnetic
Compatibility
ElectroMagnetic
52 V1.2.1(2021- SF-3 N
and ancillary equipment; CS: 150 kHz ~ 80 MHz
Compatibility

ETSI EN 301 489-9 materials and Part
Electrical 9: Specific 10 V/m
conditions for wireless SF-3 N
V2.1.1 (2019-04) EFT: ±1 kV
components microphones, similar Surge: ±2 kV
Radio Frequency (RF) CS: 150 kHz ~ 80 MHz
audio link equipment, 3V
cordless audio and in- V-DIP: max 100 %
ear monitoring devices

V2.1.1 (2019-04) EFT: ±1 kV
components microphones, similar Surge: ±2 kV
299/433
No. KT393

ElectroMagnetic
Compatibility (EMC)
standard for radio
Electrical 9: Specific CE: 150 kHz ~ 30 MHz
V2.1.1 (2019-04) RE: 30 MHz ~ 6 GHz
components microphones, similar
Radio Frequency (RF)
audio link equipment,
cordless audio and in-
ElectroMagnetic
conditions for wireless EFT: ±1 kV BS N
V2.1.1 (2019-04) components microphones, similar Surge: ±2 kV
CE : 150 kHz ∼ 30
MHz
Electrical
ETSI EN 301 843-1 materials and standard for marine 10 V/m BS N
V2.2.1 (2017-11) radio equipment and EFT: ±1 kV
components services; Surge: ±2 kV
Part 1: Common CS: 150 kHz ~ 80 MHz
technical requirements 10 V
V-DIP: max 100 %
ElectroMagnetic
Compatibility (EMC)
Electrical CE : 150 kHz ∼ 30
ETSI EN 301 843-1 materials and standard for marine MHz SF-2 N
V2.2.1 (2017-11) radio equipment and
components services; RE : 150 kHz ∼ 2 GHz
Part 1: Common
RE : 150 kHz ∼ 2 GHz

CE : 150 kHz ∼ 30
MHz
Compatibility (EMC)
ETSI EN 301 843-1 materials standard for marine
and 10 V/m SF-1 N
components EFT: ±1 kV
services; Surge: ±2 kV
V-DIP: max 100 %
300/433
No. KT393

CE : 150 kHz ∼ 30
MHz
Compatibility (EMC)
ETSI EN 301 843-1 materials standard for marine
and 10 V/m SF-3 N
services; Surge: ±2 kV
V-DIP: max 100 %
ElectroMagnetic CE : 150 kHz ∼ 30

Compatibility (EMC) MHz
standard for marine ESD : ±8 kV
ETSI EN 301 843-2 materials and radio
Electrical equipment and RS : 80 MHz ∼ 2.7
services; GHz 10 V/m BS N
V2.2.1 (2017-11) components Part 2: Specific EFT : ±1 kV
conditions for VHF SURGE : ±2 kV
radiotelephone CS : 150 kHz ∼ 80
transmitters and MHz 10 V
receivers V-DIP : max 100 %
ElectroMagnetic
Compatibility (EMC)
standard for marine
Electrical equipment and RE : 150 kHz ∼ 2 GHz
services; CE : 150 kHz ∼ 30 SF-2 N
V2.2.1 (2017-11) components Part 2: Specific MHz
conditions for VHF
radiotelephone
transmitters and
receivers

services; GHz 10 V/m SF-1 N

services; GHz 10 V/m SF-3 N
301/433
No. KT393

standard for marine ESD: ±8 kV
radio equipment and
ETSI EN 301 843-4 materials and services; 10 V/m SF-3 N
V2.2.1 (2017-11) components Part 4: Specific EFT: ±1 kV
conditions for Surge: ±2 kV
Narrow-Band Direct- CS: 150 kHz ~ 80 MHz
Printing (NBDP) NAVTEX 10 V
receivers V-DIP: max 100 %

radio equipment and

radio equipment and RS: 80 MHz ~ 2.7 GHz
Electrical
ETSI EN 301 843-4 materials and services; 10 V/m BS N
ElectroMagnetic
Compatibility (EMC)
standard for marine
radio equipment and
ETSI EN 301 843-4 materials and services; MHz SF-2 N
V2.2.1 (2017-11) Part 4: Specific
components conditions for RE : 150 kHz ∼ 2 GHz
Narrow-Band Direct-
Printing (NBDP) NAVTEX
receivers

radio equipment and
conditions for MF/HF Surge: ±2 kV
radiotelephone CS: 150 kHz ~ 80 MHz
transmitters and 10 V
302/433
No. KT393

Electrical
ETSI EN 301 843-5 materials and services; 10 V/m BS N
ElectroMagnetic
Compatibility (EMC)
standard for marine
radio equipment and
ETSI EN 301 843-5 materials and services; MHz SF-2 N
V2.2.1 (2017-11) components Part 5: Specific RE : 150 kHz ∼ 2 GHz
conditions for MF/HF
radiotelephone
transmitters and
receivers

radio equipment and

ETSI EN 301 843-6 materials and services;
Electrical 10 V/m
Part 6: Specific BS N
V2.2.1 (2017-11) EFT: ±1 kV
components conditions for Earth Surge: ±2 kV
Stations on board CS: 150 kHz ~ 80 MHz
Vessels operating in 10 V
frequency bands above V-DIP: max 100 %
3 GHz
ElectroMagnetic
Compatibility (EMC)
standard for marine
radio equipment and
Part 6: Specific MHz SF-2 N
V2.2.1 (2017-11) components conditions for Earth RE : 150 kHz ∼ 2 GHz
Stations on board
Vessels operating in
frequency bands above
3 GHz
303/433
No. KT393

ElectroMagnetic RE : 150 kHz ∼ 2 GHz
Compatibility (EMC) CE : 150 kHz ∼ 30
standard for marine MHz
radio equipment and ESD: ±8 kV
Part 6: Specific 10 V/m SF-1 N
V2.2.1 (2017-11) components conditions for Earth EFT: ±1 kV
Stations on board Surge: ±2 kV
Vessels operating in CS: 150 kHz ~ 80 MHz
frequency bands above 10 V
3 GHz V-DIP: max 100 %
ElectroMagnetic RE : 150 kHz ∼ 2 GHz

Compatibility (EMC) CE : 150 kHz ∼ 30
standard for marine MHz
radio equipment and ESD: ±8 kV
Part 6: Specific 10 V/m SF-3 N
V2.2.1 (2017-11) components conditions for Earth EFT: ±1 kV
Stations on board Surge: ±2 kV
Vessels operating in CS: 150 kHz ~ 80 MHz
frequency bands above 10 V
3 GHz V-DIP: max 100 %
Digital Terrestrial TV DVB-T, DVB-T2

Electrical Broadcast Receivers; Frequency range :
ETSI EN 303 340 materials and Harmonised Standard (198.5 ~ 786) MHz BS N
V1.2.1 (2020-09) components for access to radio Frequency bands : VHF
spectrum III, UHF IV and V

and Systems (SES);
Satellite broadcast DVB-S, DVB-s2 indoor
reception equipment;
Electrical unit.
ETSI EN 303 372-2 materials and Harmonised Standard Depends on the BS N
V1.1.1 (2016-04) components requirementsessential
covering the capabilities of the
equipment
Part 2: Indoor unit

and Systems (SES);
Satellite broadcast DVB-S, DVB-s2 indoor
Electrical
ETSI EN 303 372-2 materials and reception equipment; unit. Depends on the BS N
V1.2.1 (2021-06) Part 2: Indoor unit; capabilities of the
components Harmonised Standard equipment
for access to radio
spectrum
FCC 47 CFR Part Electrical Radio frequency CE : 150 kHz ∼ 30

15 Subpart B : materials and devices- Unintentional BS N
MHz
2022 components Radiators
FCC 47 CFR Part Electrical Radio frequency RE : 30 MHz ∼ 40 GHz

15 Subpart B : materials and devices- Unintentional CE : 150 kHz ∼ 30 SF-1 N
2022 components Radiators MHz
304/433
No. KT393


Electrical
FCC 47 CFR Part materials and Industrial, Scientific, and CE : 150 kHz ∼ 30 BS N
18:2022 components Medical Equipment MHz
Electrical Scientific, and RE : 30 MHz ∼ 1 GHz

FCC 47 CFR Part materials and Industrial, CE : 150 kHz ∼ 30 SF-1 N


Electrical INDUSTRIAL, SCIENTIFIC,

FCC Part 18 :2015 materials and AND MEDICAL 9 kHz ∼ 1 GHz SF-1 N
components EQUIPMENT
Electrical INDUSTRIAL, SCIENTIFIC,

FCC Part 18 :2015 materials and AND MEDICAL 9 kHz ∼ 1 GHz SF-2 N
components EQUIPMENT
Ford Motor Company-

Electromagnetic
Compatibility RE 310 : (0.53 ∼ 1
Specification For 605) MHz
Electrical
materials and Electrical/ Electronic CE 420 : (0.53 ∼ 108)
FMC1278:2015 SF-1 N
components Subsystems and
Components MHz
CE 421 : (0.1 ∼ 150)
[Exception] kHz
12.6.2.2 Reverberation
Method
Ford Motor Company- RE 310 : (0.53 ∼ 1

Electromagnetic 605) MHz
Compatibility CE 420 : (0.53 ∼ 108)
Specification For MHz
Electrical
materials and Electrical/ Electronic CE 421 : (0.1 ∼ 150)
FMC1278:2015 SF-2 N
Components kHz
RI 114 : (360 ∼ 3 100)
[Exception] MHz, 600 V/m
12.6.2.2 Reverberation RI 115 : (360 ∼ 2 700)
Method MHz, 14 W
305/433
No. KT393

RE 310 : (0.53 ∼ 1
605) MHz
CE 420 : (0.53 ∼ 108)
MHz
CE 421 : (0.1 ∼ 150)
kHz
CE 410 : -450 V, +150
V
RI 112 : (1 ∼ 400)
MHz, 106 dBμA
RI 114 : (360 ∼ 3 100)
MHz, 600 V/m
Ford Motor Company- RI 115 : (360 ∼ 2 700)
Electromagnetic MHz, 14 W
Compatibility RI 140 : 50 Hz ∼ 100
Specification For kHz, 165 dBρT
Electrical
materials and Electrical/ Electronic RI 130 : A2-1, A2-2
FMC1278:2015 BS N
Components RI 150 : (1 ∼ 100) kHz,
6 AP-P
[Exception] CI 210 : (0.01 ∼ 100)
12.6.2.2 Reverberation kHz, 2 VP-P
Method CI 220 : -100 V, A2-1,
A2-2, C-1, C-2
CI 221 : (-450 ∼ +150)
V
CI 222 : +120 V
CI 230 : (5 ∼ 13.5) V, -
40 ℃
CI 231 : (12 ∼ 24) V
CI 250 : (2 ∼ 100) kHz,
5V
CI 260 : (0.1 ∼ 50) ms
CI 270 : (-14 ∼ 27) V
CI 280 : Max ±25 kV
306/433
No. KT393

RE : 530 kHz ∼5 925
MHz
CE : 530 kHz ∼ 1.71
MHz
MF (PEPS LF): (100 ∼
150) kHz
ALSE, Low-Frequency
E- and H-Field : 150
kHz ∼ 30 MHz
BCI : (1 ∼ 400) MHz,
106 dBμA
RI, ALSE : 400 MHz ∼
General Specification for 2 GHz, 100 V/m
Electrical/Electronic RI, Near-Field,Portable
Components and Transmitters : (698 ∼ 2
Subsystems, 125) MHz, 2 W
Electrical Electromagnetic MFI : 5 Hz, 500 ㎐, 3
GMW3097:2019 materials and Compatibility BS N
000 μT
components [Exception] CTE : -400 V, +200 V
3.4.3 RI, Reverberation CI, Nominal 12 V Lines
Chamber, : (-200 ∼ +100) V
Mode Tuning. CI, Fast Transient
Coupling (CCC or DCC)
to I/O (excludes
nominal 12 V lines) :
±200 V
CI, 30 V DCC Transient
Coupling to I/O
(excludes nominal 12 V
power lines) : ±30 V
CI, Alternator Direct
Capacitor Coupling :
±200 V
ESD : Max ±25 kV
AN : 150 kHz ∼ 120

MHz
RE : 150 kHz ∼ 5 925
MHz
CV : 150 kHz ∼ 30
BMW Group Standard MHz
Motor vehicles CP : (30 ∼ 120) MHz
Electromagnetic CPC : 150 kHz ∼ 30
Requirements and tests HREC : 150 kHz ∼ 30
on components MHz
[exception]
Electrical MFE1 : 15 Hz ~ 150
materials and 4.9 RF emissions -
GS 95002-2:2019 kHz BS N
components Measuring using the B- CTE : -150 V, +100 V
field probe (EMVU) SR : 10 V/μs, 100
4.10 RF emissions - mA/μs
Measuring using the BCI : 100 kHz ∼ 400
stripline (SL) MHz, 106 dBμA
5.4 RF-immunity to BCICL: 100 kHz ∼ 400
interference – Stripline MHz, 106 dBμA
method (STR) LFM : (DC(0) ∼ 150)
kHz, 1 000 A/m
TSUP : (-150 ~ +100) V
TOL : (-75 ~ 60) V
ESD : Max ± 15 kV
307/433
No. KT393

BMW Group Standard AN : 150 kHz ∼ 120
Motor vehicles MHz
Electromagnetic RE : 150 kHz ∼ 5 925
Requirements and tests CV : 150 kHz ∼ 30
on components MHz
[exception]
Electrical CP : (30 ∼ 120) MHz
GS 95002-2:2019 CPC : 150 kHz ∼ 30 SF-2 N
components field probe using
Measuring the B- MHz
(EMVU) HREC : 150 kHz ∼ 30
4.10 RF emissions - MHz
Measuring using the MFE1 : 15 Hz ~ 150
stripline (SL) kHz
5.4 RF-immunity to RI(ALSE) : 200 MHz ∼
interference – Stripline 6 GHz, 140 V/m
method (STR)
BMW Group Standard AN : 150 kHz ∼ 120

Motor vehicles MHz
Electromagnetic RE : 150 kHz ∼ 5 925
Requirements and tests CV : 150 kHz ∼ 30
on components MHz
[exception]
Electrical CP : (30 ∼ 120) MHz
GS 95002-2:2019 CPC : 150 kHz ∼ 30 SF-1 N
components field probe using
Measuring the B- MHz
(EMVU) HREC : 150 kHz ∼ 30
4.10 RF emissions - MHz
Measuring using the MFE1 : 15 Hz ~ 150
stripline (SL) kHz
5.4 RF-immunity to TSUP : (-150 ~ +100) V
interference – Stripline TOL : (-75 ~ 60) V
method (STR)

for Type Approval
NO.13 Electrostatic ESD: ±8 kV
discharge RS: 80 MHz ∼ 6 GHz,
NO.14 Electromagnetic 10 V/m
field LFCS: <12 kHz, 3 V
NO.15 Conducted low r.m.s. , max. 2 W
IACS Req. materials and NO.16 Conducted Radio MHz, 3 Vr.m.s. & Spot SF-3 N
1991/Rev.7 2018 components Frequency 10
NO.17 Electrical Fast Vr.m.s.
Transients / Burst EFT: ±2 kV
NO.18 Surge Surge: ±1 kV
NO.19 Radiated RE: 150 kHz ∼ 6 GHz
Emission CE: 10 kHz ∼ 30 MHz
NO.20 Conducted
Emission
308/433
No. KT393

for Type Approval
NO.13 Electrostatic
discharge ESD: ±8 kV
NO.14 Electromagnetic RS: 80 MHz ∼ 6 GHz,
field 10 V/m
NO.15 Conducted low CS: 150 kHz ∼ 80
IACS Req. MHz, 3 Vr.m.s. & Spot
materials and NO.16 Conducted Radio SF-1 N
1991/Rev.7 2018 10 Vr.m.s.
components Frequency EFT: ±2 kV
NO.17 Electrical Fast Surge: ±1 kV
Transients / Burst RE: 150 kHz ∼ 6 GHz
NO.19 Radiated
Emission
NO.20 Conducted
Emission

for Type Approval
NO.13 Electrostatic
discharge
NO.14 Electromagnetic
field
NO.15 Conducted low
IACS Req. materials and NO.16 Conducted Radio CE: 10 kHz ∼ 30 MHz SF-2 N
1991/Rev.7 2018 RE: 150 kHz ∼ 6 GHz
components Frequency
NO.17 Electrical Fast
Transients / Burst
NO.18 Surge
NO.19 Radiated
Emission
NO.20 Conducted
Emission

for Type Approval
NO.13 Electrostatic
discharge
NO.14 Electromagnetic ESD: ±8 kV
field RS: 80 MHz ∼ 6 GHz,
NO.15 Conducted low 10 V/m
IACS Req. materials and NO.16 Conducted Radio MHz, 3 Vr.m.s. & Spot BS N
1991/Rev.7 2018 components Frequency 10 Vr.m.s.
NO.17 Electrical Fast EFT: ±2 kV
Transients / Burst Surge: ±1 kV
NO.19 Radiated
Emission
NO.20 Conducted
Emission
Electrical
materials and Industrial, Scientific and
ICES-001 Issue 5 BS N
components medical(ISM) equipment CE: 9 kHz ~ 30 MHz
309/433
No. KT393

Electrical
materials and Industrial, Scientific and RE: 9 kHz ~ 6 GHz
ICES-001 Issue 5 SF-1 N
Electrical
Electrical
Information Technology
Electrical Equipment (Including RE: 9 kHz ∼ 1 GHz
ICES-003 Issue 6 materials and Digital Apparatus) — SF-1 N
components Limits and Methods of CE: 9 kHz ∼ 30 MHz
Measurement
Electrical Equipment (Including RE: 9 kHz ∼ 40 GHz
ICES-003 Issue 6 materials and Digital Apparatus) — SF-2 N
Measurement
Electrical Equipment (Including
ICES-003 Issue 6 materials and Digital Apparatus) — BS N
Measurement
Electrical Equipment (Including CE : 150 kHz ∼ 30
ICES-003 Issue 7 materials and Digital Apparatus) — BS N
components Limits and Methods of MHz
Measurement
Electrical Equipment (Including RE : 30 MHz ∼ 6 GHz
ICES-003 Issue 7 materials and Digital Apparatus) — CE : 150 kHz ∼ 30 SF-1 N
Measurement
Measurement
Measurement
Electrical installations in
Electrical ships –
IEC 60092- materials and Part 504: Automation, CE: 150 kHz ~ 30 MHz SF-2 N
504:2016 RLV RE: 30 MHz ~ 6 GHz
components control and
instrumentation
310/433
No. KT393

RE: 30 MHz ~ 6 GHz
Electrical installations in ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
IEC 60092- 10 V/m
materials and Part 504: Automation, EFT: ±2 kV SF-1 N
504:2016 RLV components control and Surge: ±2 kV
instrumentation CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

RS: 80 MHz ~ 6 GHz
IEC 60092- 10 V/m
materials and Part 504: Automation, EFT: ±2 kV SF-3 N
10 V
V-DIP: max 100 %

ESD: ±8 kV
Electrical installations in RS: 80 MHz ~ 6 GHz
Electrical ships – 10 V/m
IEC 60092- materials and Part 504: Automation, EFT: ±2 kV BS N
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
Electrical and electronic RS: 80 MHz ~ 2 GHz
Electrical 10 V/m
materials and installations in ships –
IEC 60533:1999 EFT: ±2 kV SF-3 N
compatibility CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
Electrical and electronic

Electrical installations in ships – CE: 150 kHz ~ 30 MHz
IEC 60533:1999 materials and SF-2 N
components compatibility

ESD: ±8 kV
Electrical 10 V/m
IEC 60533:1999 EFT: ±2 kV BS N
10 V
V-DIP: max 100 %
311/433
No. KT393

RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
Electrical installations in ships – 10 V/m
IEC 60533:1999 materials and Electromagnetic SF-1 N
EFT: ±2 kV
components compatibility Surge: ±2 kV
10 V
V-DIP: max 100 %

Electrical installations in ships –
IEC 60533:2015 materials and CE: 9 kHz ~ 30 MHz BS N
Electromagnetic
RE: 9 kHz ~ 2 GHz

CE: 9 kHz ~ 30 MHz
ESD: ±8 kV
Electrical and electronic RS: 80 MHz ~ 3 GHz,
Electrical installations in ships – 10 V/m
IEC 60533:2015 materials and Electromagnetic SF-1 N
EFT: ±1 kV
CS: 150 kHz ~ 80 MHz,
10 V
V-DIP: max 100 %

Electrical installations in ships – RE: 9 kHz ~ 2 GHz
RE: 9 kHz ~ 2 GHz

CE: 9 kHz ~ 30 MHz
ESD: ±8 kV
Electrical and electronic RS: 80 MHz ~ 3 GHz,
Electrical 10 V/m
IEC 60533:2015 EFT: ±1 kV SF-3 N
compatibility CS: 150 kHz ~ 80 MHz,
10 V
V-DIP: max 100 %
Over voltage: 0 to 225

V
Surge: ±6 ㎸
ESD: ±15 ㎸
Electrical Railway applications — Burst: ±4 ㎸
IEC 60571:2012 materials and Electronic equipment RS: 80 MHz ~ 6 GHz, SF-3 N
components used on rolling stock 20 V/m
CS: 0.15 MHz ~ 80
MHz, 10 V
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
312/433
No. KT393

V
Surge: ±6 ㎸
ESD: ±15 ㎸
IEC 60571:2012 materials and Electronic equipment RS: 80 MHz ~ 6 GHz, SF-1 N
components used on rolling stock 20 V/m
CS: 0.15 MHz ~ 80
MHz, 10 V
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
Surge: ±4 ㎸
ESD: ±15 ㎸
Burst: ±4 ㎸
Electrical Railway applications — RS: 80 MHz ~ 6 GHz,
IEC 60571:2012 materials and Electronic equipment BS N
20 V/m
components used on rolling stock CS: 0.15 MHz ~ 80
MHz, 10 V
CE: 9 kHz ~ 30 MHz

Electrical
IEC 60601-1- materials and for safety - Collateral 10 V/m BS N
V-DIP: max 100 %
Medical electrical
Electrical
IEC 60601-1- materials and for safety - Collateral RE: 30 MHz ~ 6 GHz SF-2 N
2:2007 standard : CE: 150 kHz ~ 30 MHz
components Electromagnetic
compatibility -
RE: 30 MHz ~ 6 GHz

Electrical 10 V/m
IEC 60601-1- materials and for safety - Collateral EFT: ±2 kV SF-1 N
2:2007 standard :
M/F: 3 A/m
313/433
No. KT393

RE: 30 MHz ~ 6 GHz
Electrical
IEC 60601-1- materials and for safety - Collateral 10 V/m SF-3 N
V-DIP: max 100 %
Medical electrical
equipment – CE: 9 kHz ∼ 30 MHz
requirements for basic RS: 80 MHz ∼ 6 GHz
Electrical
IEC 60601-1- materials and safety and essential EFT: 5.5 kV BS N
2:2014 performance – Surge: ±6.6 kV
Electromagnetic MHz
disturbances – V-DIP: (0 ∼ 100) %
Medical electrical
equipment –
Part 1-2: General
Electrical
IEC 60601-1- materials and safety and essential RE: 9 kHz ∼ 40 GHz SF-2 N
2:2014 performance – CE: 9 kHz ∼ 30 MHz
Electromagnetic
disturbances –
Medical electrical RE: 9 kHz ∼ 40 GHz

requirements for basic RS: 80 MHz ∼ 6 GHz
Electrical
IEC 60601-1- materials and safety and essential EFT: 5.5 kV SF-1 N
2:2014 performance – Surge: ±6.6 kV
Electromagnetic MHz
Requirements and tests V-DIP: (0 ∼ 100) %
Medical electrical RE: 9 kHz ∼ 40 GHz

Electrical RS: 80 MHz ∼ 6 GHz
IEC 60601-1- materials and safety and essential EFT: 5.5 kV SF-3 N
2:2014 performance –
components Collateral Standard: Surge: ±6.6 kV
CS: 150 kHz ∼ 230
Electromagnetic MHz
disturbances – V-DIP: (0 ∼ 100) %
314/433
No. KT393

IEC 60601-1- Electrical 10 V/m
materials and safety and essential
2:2014+AMD1:20 EFT: ±1 kV BS N
performance –
20 components Collateral Standard: Surge: ±2 kV
CS: 150 kHz ~ 80 MHz,
Medical electrical
equipment –
Part 1-2: General
materials and safety and essential RE: 30 MHz ~ 6 GHz
2:2014+AMD1:20 SF-2 N
performance – CE: 150 kHz ~ 30 MHz
20 components Collateral Standard:
Electromagnetic
disturbances –

materials and safety and essential 10 V/m
2:2014+AMD1:20 SF-3 N
performance – EFT: ±1 kV
20 components Collateral Standard: Surge: ±2 kV
RE: 30 MHz ~ 6 GHz

materials and safety and essential EFT: ±1 kV
2:2014+AMD1:20 SF-1 N
performance – Surge: ±2 kV
20 components Collateral Standard: CS: 150 kHz ~ 80 MHz,
kHz ~ 26 MHz

RS: 80 MHz ~ 2 GHz
radiocommunication
Electrical 10 V/m
IEC 60945 Ed. materials and equipment and systems EFT: ±2 kV BS N
4.0b:2002 components Methods of testing and - Surge: ±2 kV
V-DIP: max 100 %
315/433
No. KT393

radiocommunication
Electrical
IEC 60945 Ed. materials and equipment and systems RE: 30 MHz ~ 6 GHz SF-2 N
4.0b:2002 components Methods of testing and - CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz

Electrical
IEC 60945 Ed. materials and - General requirements - 10
equipment and systems V/m SF-1 N
4.0b:2002 EFT: ±2 kV
components Methods of testing and Surge: ±2 kV
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

RS: 80 MHz ~ 2 GHz
radiocommunication
Electrical 10 V/m
IEC 60945 Ed. materials and equipment and systems
General requirements - EFT: ±2 kV SF-3 N
4.0b:2002 components -Methods of testing and CS: 150±2
Surge: kV
kHz ~ 80 MHz
V-DIP: max 100 %
Electromagnetic
compatibility (EMC)
- Part 2-2: Environment
IEC 61000-2- Electrical - Compatibility levels for
2:2002+A1:2017+ materials and low-frequency 3Φ, (0 ∼ 620) V SF-1 N
A2:2018 components conducted disturbances
low-voltage power
supply systems
Electromagnetic
IEC 61000-2- materials and low-frequency 3Φ, (0 ∼ 620) V SF-1 N
2:2002/A1:2017 components conducted disturbances
low-voltage power
supply systems
Electromagnetic
t
Electrical LFCD: Frequency : (0 ∼
IEC 61000-2- materials and 2－4：Environment－Co 9) kHz SF-1 N
4:2002 mpatibility levels in
components industrial plants for low- max 35 kV
frequency conducted
disturbances
316/433
No. KT393

Electromagnetic
compatibility (EMC)-
Part 3-11: Limits –
changes, voltage
Electrical
IEC 61000-3- materials and fluctuations and flicker Flicker: 16 A ＜ I ≤ 75 A SF-1 N
11:2017 in public low-voltage
components supply systems-
Equipment with rated
current ≤ 75 A and
connection
Electromagnetic
compatibility (EMC)-
Part 3-11: Limits –
changes, voltage
Electrical
IEC 61000-3- materials and fluctuations and flicker Flicker: 16 A ＜ I ≤ 75 A SF-3 N
11:2017 in public low-voltage
components supply systems-
connection

harmonic currents
Electrical produced by equipment Harmonic: 16 A ＜ I ≤
IEC 61000-3- materials and connected to public SF-3 N
12:2011 75 A
components low-voltage systems

harmonic currents
Electrical produced by equipment Harmonic: 16 A ＜ I ≤
IEC 61000-3- materials and connected to public SF-1 N
12:2011 75 A
components low-voltage systems
Limits for harmonic

IEC 61000-3- Electrical current emission
9 phase)
Limits for harmonic

9 phase)
Limits for harmonic

9 phase)
317/433
No. KT393

Limits for harmonic
IEC 61000-3- materials and (equipment input Harmonic: max 16 A SF-3 N
2_2018_ed5.0 components current ≤ 16 A per
phase)
Limits for harmonic

phase)
Limits for harmonic

phase)
changes, voltag
IEC 61000-3- materials and supply systems, for Flicker: max 16 A SF-1 N
changes, voltag
changes, voltag
voltage changes,
IEC 61000-3- Electrical flicker in public low-
3:2013+AMD1:20 materials and voltage supply systems, Flicker: max 16 A SF-2 N
17 CSV Edition 3.1 components for equipment with
318/433
No. KT393

voltage changes,
voltage changes,
Electromagnetic
IEC 61000-4- materials and measurement max 100 A/m SF-1 N
immunity test
Electromagnetic
immunity test
Testing and
measurement
Electrical
IEC 61000-4- materials and techniques - Voltage V-DIP: max 100 % SF-1 N
immunity tests
Testing and
measurement
Electrical
IEC 61000-4- materials and techniques - Voltage V-DIP: max 100 % BS N
immunity tests
Testing and
measurement
Electrical
IEC 61000-4- materials and techniques - Voltage V-DIP: max 100 % SF-3 N
immunity tests
319/433
No. KT393

Testing and
measurement
IEC 61000-4- materials and Voltage dips, short V-DIP: max 100 % BS N
voltage variations
immunity tests
Testing and
measurement
IEC 61000-4- materials and Voltage dips, short V-DIP: max 100 % SF-1 N
voltage variations
immunity tests
Testing and
measurement
IEC 61000-4- materials and Voltage dips, short V-DIP: max 100 % SF-3 N
voltage variations
immunity tests
Testing and
measurement
IEC 61000-4- materials and and voltage variations V-DIP: max 100 % SF-3 N
phase
Testing and
measurement
IEC 61000-4- materials and and voltage variations V-DIP: max 100 % SF-1 N
phase
Testing and
measurement
IEC 61000-4- materials and and voltage variations V-DIP: max 100 % BS N
phase
Testing and
IEC 61000-4- materials and techniques max ±6 kV SF-3 N
12:2006 components - Ring wave immunity
test
320/433
No. KT393

Testing and
IEC 61000-4- materials and techniques max ±6 kV SF-1 N
12:2006 components - Ring wave immunity
test
Electromagnetic
Electrical
IEC 61000-4- materials and Part 4-12: Testing and max ±6 kV SF-3 N
12:2017 measurement
immunity test
Electromagnetic
Electrical
IEC 61000-4- materials and Part 4-12: Testing and max ±6 kV SF-1 N
12:2017 measurement
immunity test
Testing and
measurement
techniques
IEC 61000-4- Electrical - Harmonics and
13:2002 materials and interharmonics including 3 Phase 500 V, 63 A SF-1 N
/A1:2009 components mains signalling at a.c.
power port, low
frequency immunity
tests
Testing and
measurement
techniques
Electrical - Harmonics and
IEC 61000-4- materials and interharmonics including 3 Phase 500 V, 63 A SF-1 N
13:2002/A2:2015 components mains signalling at a.c.
power port, low
frequency immunity
tests
Testing and
measurement
IEC 61000-4- techniques
Electrical
14:1999 materials and -immunity
Voltage fluctuation 3 Phase 500 V, 63 A SF-1 N
/A1:2002/A2:200 components equipmenttest for
9 with input
current not exceeding
16 A per phase
Electromagnetic
measurement
Electrical
IEC 61000-4- materials and techniques - Test for
conducted, 0 Hz ∼ 150 kHz SF-3 N
16:2011 immunity to
components common mode
disturbances in the
150 kHz
321/433
No. KT393

Electromagnetic
Part 4-16: Testing and d.c., 162/3 Hz, 50 Hz,
measurement
Electrical 60 Hz : (1 ∼ 30) V
IEC 61000-4- materials and techniques - Test for SF-3 N
16:2015 immunity to conducted,
components common mode 15 Hz ∼ 150 kHz : (0.1
∼ 30) V
disturbances in the
150 kHz
Testing and
IEC 61000-4- measurement
Electrical
17:1999 materials and techniques DC 500 V SF-1 N
/A1:2002/A2:200 components -power
Ripple on d.c. input
9 port immunity
test
Electromagnetic
measurement
techniques - Test for
Electrical
IEC 61000-4- materials and immunity to conducted, LFCS: (2 ∼ 150) kHz, SF-3 N
19:2014 differential mode 30 V
signalling in the
to 150 kHz at a.c. power
ports
Testing and
measurement
techniques
materials and -test
Unbalance, immunity 3상 500 V, 63 A
27:2000 SF-1 N
components inputfor equipment with
/A1:2009 current not
exceeding 16 A per
phase
Testing and
measurement
techniques
IEC 61000-4- Electrical - Variation of power
28:1999 materials and frequency, immunity 3상 500 V, 63 A SF-1 N
/A1:2002/A2:200 components test for equipment with
9 input current not
exceeding 16 A per
phase
Testing and
measurement
techniques
Electrical
IEC 61000-4- materials and -interruptions
29:2000 and
immunity tests
322/433
No. KT393

Testing and
measurement
techniques
Electrical
IEC 61000-4- materials and -interruptions
29:2000 and
immunity tests
Testing and
IEC 61000-4- materials and techniques ESD: max ±30 kV SF-3 N
immunity test
Testing and
IEC 61000-4- materials and techniques ESD: max ±30 kV BS N
immunity test
Testing and
IEC 61000-4- materials and techniques ESD: max ±30 kV SF-1 N
immunity test
Testing and
Electrical
IEC 61000-4-3 materials and techniques - Radiated, 20 V/m BS N
Ed.3.2:2010 radio-frequency, 1 GHz ~ 3 GHz 10
components electromagnetic field V/m
immunity test
Testing and
Electrical
IEC 61000-4-3 materials and techniques - Radiated, 20 V/m SF-1 N
immunity test
Testing and
Electrical
IEC 61000-4-3 materials and techniques - Radiated, 20 V/m SF-3 N
immunity test
Electromagnetic
measurement
IEC 61000-4- Electrical techniques – Voltage
34:2005 materials and dips, short interruptions 3Φ, (0 ∼ 620) V SF-1 N
+A1:2009 components and voltage variations
immunity tests for
per phase
323/433
No. KT393

Electromagnetic
IEC 61000-4- materials and techniques - Radiated immunity : SF-2 N
Immunity test
[Exception]
*380MHz ~ 6 GHz
Testing and
IEC 61000-4-4 materials and techniques - Electrical EFT: max ±4 kV BS N
Ed.2.1:2011 components fast transient/burst
immunity test
Testing and
IEC 61000-4-4 materials and techniques - Electrical EFT: max ±4 kV SF-1 N
immunity test
Testing and
IEC 61000-4-4 materials and techniques - Electrical EFT: max ±4 kV SF-3 N
immunity test
Testing and
measurement
Electrical
IEC 61000-4- materials and techniques EFT: max ±4 kV BS N
Electrical fast
immunity
test
Testing and
measurement
Electrical
IEC 61000-4- materials and techniques EFT: max ±4 kV SF-1 N
Electrical fast
immunity
test
Testing and
measurement
Electrical
IEC 61000-4- materials and techniques EFT: max ±4 kV SF-3 N
Electrical fast
immunity
test
Testing and
Electrical
materials and SURGE: max ±4 kV SF-3 N
5:2005 techniques - Surge
components immunity test
Testing and
Electrical
materials and SURGE: max ±4 kV BS N
324/433
No. KT393

Testing and
Electrical
materials and SURGE: max ±4 kV SF-1 N
Electromagnetic
Electrical
IEC 61000-4- materials and Part 4-5: Testing and SURGE: max ±4 kV SF-3 N
5:2014 measurement
immunity test
Electromagnetic
Electrical
5:2014 measurement
immunity test
Electromagnetic
Electrical
IEC 61000-4- materials and Part 4-5: Testing and SURGE: max ±4 kV BS N
5:2014 measurement
immunity test
Electromagnetic
Electrical
immunity test
Electromagnetic
Electrical
IEC 61000-4- materials and Part 4-5: Testing and SURGE: max ±6 kV BS N
immunity test
Electromagnetic
Electrical
immunity test
Testing and
measurement
Electrical
IEC 61000-4-6 materials and techniques - Immunity CS: 150 kHz ∼ 230 SF-3 N
Ed.3.0:2008 components disturbances, induced by MHz, 10 V
to conducted
Testing and
measurement
Electrical
IEC 61000-4-6 materials and techniques - Immunity CS: 150 kHz ∼ 230 SF-1 N
to conducted
325/433
No. KT393

Testing and
measurement
Electrical
IEC 61000-4-6 materials and techniques - Immunity CS: 150 kHz ∼ 230 BS N
to conducted
Electromagnetic
Electrical
IEC 61000-4- materials and measurement CS: 150 kHz ∼ 230 SF-1 N
6:2013 techniques – Immunity MHz, 10 V
components to conducted
disturbances, induced by
Electromagnetic
Electrical
IEC 61000-4- materials and measurement CS: 150 kHz ∼ 230 SF-3 N
Electromagnetic
Electrical
IEC 61000-4- materials and measurement CS: 150 kHz ∼ 230 BS N
Testing and
IEC 61000-4-8 materials and techniques - Power MF: max 30 A/m SF-1 N
Ed.2.0:2009 components frequency magnetic field
immunity test
Electromagnetic
test
Electromagnetic
test
326/433
No. KT393

compatibility(EMC)-Part RS: 80 MHz ∼ 6 GHz,
6-1: Generic standards- 3 V/m
Electrical Immunity for residential,
IEC 61000-6- EFT: ±1 kV
materials and commercial and light- BS N
1:2016 SURGE: ±2 kV
components industrial environments CS: 150 kHz ∼ 80
[Exception] MHz, 3 V
below 26.5 GHz
IEC 61000-6- materials and commercial and light- SURGE: ±2 kV SF-1 N
1:2016 components industrial environments CS: 150 kHz ∼ 80
- Scope and object : M/F: 3 A/m
below 26.5 GHz V-DIP: max 100 %
Electrical Immunity for residential,
IEC 61000-6- EFT: ±1 kV
materials and commercial and light- SF-3 N
1:2016 SURGE: ±2 kV
below 26.5 GHz
ESD: ±8 kV
Electromagnetic
Electrical
IEC 61000-6- EFT: ±1 kV
materials and 6-2: Generic standards- SURGE: BS N
2:2016 components Immunity for industrial CS: 150 ±2 kV
kHz ∼ 80
V-DIP: max 100 %
ESD: ±8 kV
IEC 61000-6- materials and 6-2: Generic standards- SURGE: ±2 kV SF-1 N
2:2016 components Immunity for industrial CS: 150 kHz ∼ 80
M/F: 30 A/m
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic
Electrical
IEC 61000-6- EFT: ±1 kV
2:2016 components Immunity for industrial CS: 150 ±2 kV
kHz ∼ 80
V-DIP: max 100 %
327/433
No. KT393

Electromagnetic
compatibility (EMC)
Electrical
IEC 61000-6- materials and standards RE : 9 kHz ∼ 6 GHz SF-3 N
3:2006/A1:2010 components –residential,
commercial
environments
Electromagnetic
compatibility (EMC)
Electrical
commercial
environments
Electromagnetic
compatibility (EMC)
Electrical
commercial
environments
Electromagnetic
compatibility (EMC)
Electrical
IEC 61000-6- materials and standards CE : 9 kHz ∼ 30 MHz BS N
commercial
environments
Electromagnetic
Electrical Part 6-3: Generic
IEC 61000-6-
3:2020 Edition 3.0 components standards
materials and - Emission BS N
standard for equipment CE : 9 kHz ∼ 30 MHz
in residential
environments
Electromagnetic
IEC 61000-6- RE : 9 kHz ∼ 6 GHz
materials and - Emission SF-1 N
in residential
environments
Electromagnetic
IEC 61000-6- RE : 9 kHz ∼ 6 GHz
in residential
environments
328/433
No. KT393

Electromagnetic
IEC 61000-6- RE : 9 kHz ∼ 6 GHz
in residential
environments
Electromagnetic
compatibility (EMC)
Electrical
IEC 61000-6- materials and –standards
4:2018 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
Part 6-4: Generic CE : 9 kHz ∼ 30 MHz BS N
4:2018 components – Emission standard for
Electromagnetic
compatibility (EMC)
Electrical
4:2018 CE : 9 kHz ∼ 30 MHz
Electromagnetic
compatibility (EMC)
Electrical
4:2018 CE : 9 kHz ∼ 30 MHz

ESD: ±8 kV
IEC 61204-3:2016 materials and SF-3 N
3V
V-DIP: max 100 %

ESD: ±8 kV
3V
V-DIP: max 100 %
329/433
No. KT393

ESD: ±8 kV
RS: 80 MHz ∼ 2.7 GHz
Low voltage switch
Electrical 3 V/m
mode power supplies-
IEC 61204-3:2016 materials and EFT: ±1 kV BS N
Part 3: Electromagnetic
compatibility (EMC) CS: 150 kHz ∼ 80 MHz
3V
V-DIP: max 100 %
Low voltage switch

Electrical mode power supplies- CE: 150 kHz ∼ 30 MHz
Part 3: Electromagnetic RE: 30 MHz ∼ 1 GHz
RE: 30 MHz ~ 6 GHz

measurement, control RS: 80 MHz ~ 2.7 GHz
Electrical and laboratory use 10 V/m
IEC 61326-1:2012 materials and – EMC requirements SF-3 N
EFT: ±2 kV
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

Electrical 10 V/m
IEC 61326-1:2012 EFT: ±2 kV SF-1 N
requirements 10 V
V-DIP: max 100 %
M/F: 30 A/m

Electrical
materials and and laboratory use RE: 30 MHz ~ 6 GHz
IEC 61326-1:2012 SF-2 N
requirements

Electrical 10 V/m
IEC 61326-1:2012 EFT: ±2 kV BS N
requirements 10 V
V-DIP: max 100 %
330/433
No. KT393

RE: 30 MHz ~ 6 GHz
Electrical
materials and EMC requirements – Part 10
and laboratory use – V/m
IEC 61326-1:2020 SF-3 N
EFT: ±2 kV
10 V
V-DIP: max 100 %

RS: 80 MHz ~ 6 GHz
Electrical 10 V/m
materials and and laboratory use –
IEC 61326-1:2020 requirements – Part EFT: ±2 kV BS N
components EMC Surge: ±2 kV
requirements 10 V
V-DIP: max 100 %

Electrical
materials and and laboratory use – RE: 30 MHz ~ 6 GHz
IEC 61326-1:2020 SF-2 N
EMC requirements – Part CE: 150 kHz ~ 30 MHz
requirements
RE: 30 MHz ~ 6 GHz

RS: 80 MHz ~ 6 GHz
Electrical 10 V/m
materials and and laboratory use –
IEC 61326-1:2020 requirements – Part EFT: ±2 kV SF-1 N
components EMC Surge: ±2 kV
requirements 10 V
V-DIP: max 100 %
M/F: 30 A/m

Electrical
IEC 61326-2- materials and –operational
for sensitive test and CS: 150 kHz ~ 80 MHz
measurement 10 V
equipment for EMC V-DIP: max 100 %
unprotected
applications
331/433
No. KT393

requirements
Electrical 10 V/m
1:2012 conditions
equipment for EMC M/F: 30 A/m
unprotected
applications

and laboratory use
requirements
Electrical
conditions
for sensitive test and

measurement
equipment for EMC
unprotected
applications

requirements
Electrical 10 V/m
1:2012 conditions
equipment for EMC
unprotected
applications

Electrical
for portable test, CS: 150 kHz ~ 80 MHz
measuring and 10 V
monitoring equipment V-DIP: max 100 %
used in low-voltage
332/433
No. KT393

requirements
Electrical 10 V/m
2:2012 conditions
used in low-voltage

and laboratory use
requirements
Electrical
conditions
for portable test,

measuring and
used in low-voltage

requirements
Electrical 10 V/m
2:2012 conditions
monitoring equipment M/F: 30 A/m
used in low-voltage

Electrical 10 V/m
IEC 61326-2- materials and requirements EFT: ±2 kV BS N
signal conditioning
333/433
No. KT393

and laboratory use
Electrical
IEC 61326-2- materials and requirements RE: 30 MHz ~ 6 GHz SF-2 N
3:2012 – Test configurations, CE: 150 kHz ~ 30 MHz
for transducers with
signal conditioning

Electrical 10 V/m
IEC 61326-2- materials and requirements EFT: ±2 kV SF-1 N
integrated or remote M/F: 30 A/m
signal conditioning

Electrical
IEC 61326-2- materials and requirements 10 V/m SF-3 N
Test configurations, EFT: ±2 kV
conditions Surge: ±2 kV
for transducers with 10 V
integrated or remote V-DIP: max 100 %
signal conditioning

IEC 61326-2- 10 V/m
4:2012 EFT: ±2 kV
according
334/433
No. KT393

IEC 61326-2- materials and operational conditions EFT: ±2 kV SF-1 N
8 and for equipment for M/F: 30 A/m
according

and laboratory use
requirements
IEC 61326-2- RE: 30 MHz ~ 6 GHz
for insulation
monitoring devices
according to IEC 61557-
according

and laboratory use
IEC 61326-2- materials and operational conditions EFT: ±2 kV BS N
according

Electrical 10 V/m
IEC 61326-2- materials and requirements – EFT: ±2 kV BS N
IEC 61784-1, CP 3/2
335/433
No. KT393

Electrical 10 V/m
IEC 61326-2- materials and requirements – EFT: ±2 kV SF-1 N
interfaces according to M/F: 30 A/m
IEC 61784-1, CP 3/2

Electrical
IEC 61326-2- materials and requirements – 10 V/m SF-3 N
5:2012 Test configurations, EFT: ±2 kV
for field devices with 10 V
interfaces according to V-DIP: max 100 %
IEC 61784-1, CP 3/2

and laboratory use
Electrical
IEC 61326-2- materials and requirements – RE: 30 MHz ~ 6 GHz SF-2 N
5:2012 Test configurations, CE: 150 kHz ~ 30 MHz
for field devices with
IEC 61784-1, CP 3/2
RE: 30 MHz ~ 6 GHz

and laboratory use RS: 80 MHz ~ 2.7 GHz
Electrical – EMC requirements 10 V/m
IEC 61326-2- materials and – Part 2-6: Particular EFT: ±2 kV SF-1 N
6:2012 components requirements Surge: ±2 kV
– In vitro diagnostic CS: 150 kHz ~ 80 MHz
(IVD) medical 10 V
M/F: 30 A/m

Electrical – EMC requirements 10 V/m
IEC 61326-2- materials and – Part 2-6: Particular EFT: ±2 kV BS N
6:2012 components requirements Surge: ±2 kV
(IVD) medical 10 V
336/433
No. KT393

and laboratory use
Electrical – EMC requirements
IEC 61326-2- RE: 30 MHz ~ 6 GHz
materials and – Part 2-6: Particular SF-2 N
6:2012 CE: 150 kHz ~ 30 MHz
components requirements
– In vitro diagnostic
(IVD) medical
equipment
RE: 30 MHz ~ 6 GHz

Electrical – EMC requirements
IEC 61326-2- 10 V/m
materials and – Part 2-6: Particular SF-3 N
6:2012 EFT: ±2 kV
(IVD) medical 10 V
RE: 30 MHz ~ 6 GHz

ESD: ±15 kV
Electrical 10 V/m
IEC 61326-2- materials and EMC requirements – EFT: ±2 kV SF-1 N
- In vitro
10 V
M/F: 30 A/m

Electrical
IEC 61326-2- materials and EMC requirements – RE: 30 MHz ~ 6 GHz SF-2 N
6:2020 Part 2-6: Particular CE: 150 kHz ~ 30 MHz
equipment

Electrical 10 V/m
IEC 61326-2- materials and EMC requirements – EFT: ±2 kV BS N
- In vitro CS: 150 kHz ~ 80 MHz
337/433
No. KT393

RE: 30 MHz ~ 6 GHz
Electrical
IEC 61326-2- materials and EMC requirements – 10 V/m SF-3 N
equipment 10 V
V-DIP: max 100 %

ESD: ±8 kV
Electrical equipment for RS: 80 MHz ∼ 2.7
Electrical measurement, control GHz, 10 V/m
IEC 61326:2010 materials and and laboratory use - SF-3 N
EFT: ±1 kV
components EMC requirements SURGE : ±2 kV
CS: 150 kHz ∼ 80
MHz, 10 V
V-DIP: max 100 %

ESD: ±8 kV
materials and measurement, control
IEC 61326:2010 EFT: ±1 kV SF-1 N
components and laboratory use - SURGE : ±2 kV
EMC requirements CS: 150 kHz ∼ 80
MHz, 10 V
M/F: 3 A/m
V-DIP: max 100 %

Electrical measurement, control RE: 30 MHz ∼ 6 GHz
and laboratory use - CE: 150 kHz ∼ 30 MHz
components EMC requirements

ESD: ±8 kV
materials and measurement, control
IEC 61326:2010 EFT: ±1 kV BS N
components and laboratory use - SURGE : ±2 kV
EMC requirements CS: 150 kHz ∼ 80
MHz, 10 V
V-DIP: max 100 %
ESD: ±8 kV
IEC 61547:2009 SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
338/433
No. KT393

ESD: ±8 kV
V/m
IEC 61547:2009 materials and lighting purposes - EMC Surge: ±2 kV SF-1 N
3V
V-DIP: max 100 %
M/F: 1 A/m
ESD: ±8 kV
IEC 61547:2009 BS N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
RS: 80 MHz ∼ 1 GHz
3 V/m
components immunity requirements CS: 150 kHz ∼ 80
MHz 3 V
V-DIP: max 100 %
M/F: 1 A/m
ESD: ±8 kV
3 V/m
MHz 3 V
V-DIP: max 100 %
M/F: 1 A/m
ESD: ±8 kV
3 V/m
IEC 61547:2020 materials and lighting purposes - EMC Surge: ±2 kV BS N
MHz 3 V
V-DIP: max 100 %
M/F: 1 A/m

ESD: ±8 kV
Electrical 10 V/m
systems
Part 3: EMC
requirements and CS: 150 kHz ~ 80 MHz
specific test methods 3V
V-DIP: max 100 %
339/433
No. KT393

Adjustable speed
Electrical
materials and systems CE: 150 kHz ~ 30 MHz
IEC 61800-3:2017 SF-2 N
components Part 3: EMC RE: 30 MHz ~ 6 GHz
requirements and
RE: 30 MHz ~ 6 GHz

Electrical
materials and systems 10 V/m
IEC 61800-3:2017 SF-1 N
components Part 3: EMC EFT: ±2 kV
3V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

Electrical
materials and systems 10 V/m
IEC 61800-3:2017 SF-3 N
components Part 3: EMC EFT: ±2 kV
3V
V-DIP: max 100 %

ESD: ±8 kV
systems (UPS)
Electrical 10 V/m
– Part 2:
Electromagnetic
compatibility (EMC) CS: 150 kHz ~ 80 MHz
requirements 10 V
V-DIP: max 100 %
systems (UPS)
Electrical
Part 2: CE: 150 kHz ~ 30 MHz
IEC 62040-2:2016 SF-2 N
RE: 30 MHz ~ 1 GHz
requirements
RE: 30 MHz ~ 1 GHz

Electrical
Part 2: 10 V/m
IEC 62040-2:2016 SF-1 N
EFT: ±2 kV
10 V
V-DIP: max 100 %
340/433
No. KT393

RE: 30 MHz ~ 1 GHz
Electrical
Part 2: 10 V/m
IEC 62040-2:2016 SF-3 N
EFT: ±2 kV
10 V
V-DIP: max 100 %

RE: 9 kHz ∼ 6 GHz
ESD: ±8 kV
Railway applications -
Electrical 20 V/m
Electromagnetic
IEC 62236-1:2018 materials and EFT: ±2 kV SF-3 N
compatibility - Part 1:
General CS: 150 kHz ∼ 80
MHz, 10 V
M/F: 300 A/m
DIP: 100 %
Electromagnetic
Electrical
materials and compatibility - Part 2:
IEC 62236-2:2018 RE: 150 kHz ∼ 1 GHz SF-3 N
Emission of the whole
components railway system to the
outside world
IEC 62236-3- materials and compatibility - Part 3-1: RE: 150 kHz ∼ 1 GHz SF-3 N
1:2018 components Rolling stock - Train and
complete vehicle

ESD: ±8 kV
IEC 62236-3- 20 V/m
2:2018 EFT: ±2 kV
components – Part 3-2: Rolling stock Surge: ±2 kV
– Apparatus CS: 150 kHz ~ 80 MHz
10 V
IEC 62236-3- CE: 150 kHz ~ 30 MHz
2:2018 RE: 30 MHz ~ 6 GHz
components – Part 3-2: Rolling stock
– Apparatus
RE: 30 MHz ~ 6 GHz

IEC 62236-3- materials and compatibility 20 V/m SF-3 N
2:2018 components – Part 3-2: Rolling stock EFT: ±2 kV
CS: 150 kHz ~ 80 MHz,
10 V
341/433
No. KT393

RE: 30 MHz ~ 6 GHz
IEC 62236-3- materials and compatibility 20 V/m SF-1 N
2:2018 components – Part 3-2: Rolling stock EFT: ±2 kV
CS: 150 kHz ~ 80 MHz,
10 V

ESD: ±8 kV
Railway applications - RS: 80 MHz ∼ 6 GHz,
Electrical compatibility - Part 4: EFT: ±2 kV
IEC 62236-4:2018 materials and Emission and immunity SF-3 N
Surge: ±2 kV
components of the signalling and CS: 150 kHz ∼ 80
telecommunications MHz, 10 V
DIP: 100 %

– Electromagnetic RS: 80 MHz ~ 6 GHz
Electrical compatibility 20 V/m
IEC 62236-5:2018 materials and – Part 5: Emission and BS N
EFT: ±2 kV
components immunity of fixed power Surge: ±2 kV
supply installations and CS: 150 kHz ~ 80 MHz
apparatus 10 V
– Electromagnetic
Electrical compatibility CE: 150 kHz ~ 30 MHz
IEC 62236-5:2018 materials and – Part 5: Emission and SF-2 N
components immunity of fixed power RE: 30 MHz ~ 6 GHz
apparatus
RE: 30 MHz ~ 6 GHz

– Electromagnetic RS: 80 MHz ~ 6 GHz
Electrical compatibility 20 V/m
IEC 62236-5:2018 materials and – Part 5: Emission and SF-1 N
components immunity of fixed power EFT: ±2 kV
supply installations and CS: 150±2
Surge: kV
kHz ~ 80 MHz
apparatus 10 V
M/F: 300 A/m
RE: 30 MHz ~ 6 GHz

Electrical compatibility RS: 80 MHz ~ 6 GHz
IEC 62236-5:2018 materials and – Part 5: Emission and 20 V/m SF-3 N
components immunity of fixed power EFT: ±2 kV
supply installations and Surge: ±2 kV
apparatus CS: 150 kHz ~ 80 MHz
10 V
342/433
No. KT393

Road vehicles - Test
methods for electrical
Electrical
materials and disturbances from
ISO 10605:2008 Max ±25 kV BS N
electrostatic discharge
10. Vehicle test method
Road vehicles - Test

ISO Electrical methods for electrical
10605:2008/A1:2 materials and Max ±25 kV BS N
disturbances from
014 components electrostatic discharge
Road vehicles -
Component test
Electrical
ISO 11452-2:2019 materials and disturbances from 80 MHz ∼ 6 GHz, 100 SF-2 N
components electromagnetic energy V/m
narrowband radiated
Part 2: Absorber-lined
shielded enclosure
Road vehicles -
Component test
Electrical
ISO 11452-4:2020 materials and disturbances from 0.1 MHz ∼ 3 GHz, 200 BS N
components electromagnetic energy mA
narrowband radiated
Part 4: Harness
excitation methods
Road vehicles -
Component test
Electrical
ISO 11452-8:2015 materials and disturbances from (DC(0) ∼ 150) kHz, 3 BS N
components electromagnetic energy 000 A/m
narrowband radiated
Part 8: Immunity to
magnetic fields
Road vehicles -
Component test
Electrical
ISO 11452-9:2021 materials and disturbances from (26 ∼ 5 850) MHz, 10 SF-2 N
components electromagnetic energy W
narrowband radiated
Part 9: Portable
transmitters
Road vehicles -
Environmental (-28 ∼ 202) V,
Electrical
ISO 16750-2:2012 materials and conditions and testing 50 Hz ∼ 25 kHz, SF-1 N
for electrical and 10 VP-P, 500 Vrms
components electronic equipment ((50 ∼ 60) Hz),
Part 2: Electrical loads 500 Vd.c., > 10 MΩ
343/433
No. KT393

Road vehicles -
Environmental (-28 ∼ 202) V,
Electrical
ISO 16750-2:2012 materials and conditions and testing 50 Hz ∼ 25 kHz, BS N
for electrical and 10 VP-P, 500 Vrms
components electronic equipment ((50 ∼ 60) Hz),
Part 2: Electrical loads 500 Vd.c., > 10 MΩ
Road vehicles - Electrical

disturbances from
Electrical conduction and CTI : (-600 ∼ +300) V
ISO 7637-2:2011 materials and coupling BS N
CTE : ±200 V
components Part 2: Electrical
transient conduction
along supply lines only

disturbances from
Electrical conduction and
ISO 7637-2:2011 materials and coupling CTI : (-600 ∼ +300) V SF-1 N
components Part 2: Electrical
transient conduction
along supply lines only

disturbances from
conduction and
Electrical coupling CCC : ±150 V
ISO 7637-3:2016 materials and Part 3: Electrical DCC : ±45 V BS N
components transient transmission by ICC : ±10 V
capacitive and inductive
coupling via lines other
than supply lines

disturbances from
conduction and
Electrical coupling CCC : ±150 V
ISO 7637-3:2016 materials and Part 3: Electrical DCC : ±45 V SF-1 N
components transient transmission by ICC : ±10 V
capacitive and inductive
coupling via lines other
than supply lines
CE: 9 kHz ~ 30 MHz

RS: 80 MHz ~ 2 GHz
radiocommunication
KN Electrical 20 V/m
60945_60533:201 materials and equipment and systems
General requirements – EFT: ±2 kV BS N
5 components –Methods of testing and CS: 150±2
Surge: kV
kHz ~ 80 MHz
V-DIP: max 100 %

radiocommunication
KN Electrical
60945_60533:201 materials and equipment and systems RE: 10 kHz ~ 2 GHz SF-2 N
components Methods of testing and – CE: 9 kHz ~ 30 MHz
– General requirements
5
344/433
No. KT393

RE: 10 kHz ~ 2 GHz
CE: 9 kHz ~ 30 MHz
KN Electrical
60945_60533:201 materials and – General requirements – 20
equipment and systems V/m SF-1 N
EFT: ±2 kV
5 components Methods of testing and Surge: ±2 kV
10 V
V-DIP: max 100 %
RE: 10 kHz ~ 2 GHz

CE: 9 kHz ~ 30 MHz
RS: 80 MHz ~ 2 GHz
radiocommunication
KN Electrical 20 V/m
60945_60533:201 materials and equipment and systems EFT: ±2 kV SF-3 N
components Methods of testing and – Surge: ±2 kV
– General requirements
5
V-DIP: max 100 %
Guidance for Approval

of Manufacturing
Process and Type
Approval, Etc.
CHAPTER3
TYPEAPPROVAL, ESD: ±8 kV
Section23 RS: 80 MHz ~ 6 GHz,
Automaticand Remote 10 V/m
Control Systems LFCS: <12 kHz, 3
14. Electrostatic Vr.m.s. ~ max. 2 W
Electrical
materials and discharge CS: 150 kHz ~ 80 MHz,
KR : 2020 SF-3 N
components 15. Electromagnetic 3 Vr.m.s. & Spot 10
field Vr.m.s.
16. Conducted low EFT: ±2 kV
frequency Surge: ±1 kV
17. Conducted radio RE: 150 kHz ~ 6 GHz
frequency CE: 10 kHz ~ 30 MHz
18. Electrical fast
transient / burst
19. Surge
20. Radiated emission
21. Conducted emission
345/433
No. KT393

of Manufacturing
Process and Type
Approval, Etc.
CHAPTER3
TYPEAPPROVAL,
Section23
Automaticand Remote
Control Systems
14. Electrostatic
Electrical
materials and discharge RE: 150 kHz ~ 6 GHz
KR : 2020 SF-2 N
15. Electromagnetic CE: 10 kHz ~ 30 MHz
components field
16. Conducted low
frequency
17. Conducted radio
frequency
18. Electrical fast
transient / burst
19. Surge

of Manufacturing
Process and Type
Approval, Etc.
CHAPTER3
TYPEAPPROVAL, ESD: ±8 kV
Section23 RS: 80 MHz ~ 6 GHz,
Automaticand Remote 10 V/m
Control Systems LFCS: <12 kHz, 3
14. Electrostatic Vr.m.s. ~ max. 2 W
Electrical
materials and discharge CS: 150 kHz ~ 80 MHz,
KR : 2020 SF-1 N
components 15. Electromagnetic 3 Vr.m.s. & Spot 10
field Vr.m.s.
16. Conducted low EFT: ±2 kV
frequency Surge: ±1 kV
17. Conducted radio RE: 150 kHz ~ 6 GHz
18. Electrical fast
transient / burst
19. Surge
346/433
No. KT393

of Manufacturing
Process and Type
Approval, Etc.
CHAPTER3
TYPEAPPROVAL,
Section23 ESD: ±8 kV
Automaticand Remote RS: 80 MHz ~ 6 GHz,
Control Systems 10 V/m
14. Electrostatic
Electrical CS: 150 kHz ~ 80 MHz,
KR : 2020 materials and discharge 3 Vr.m.s. & Spot 10 BS N
components 15. Electromagnetic Vr.m.s.
field EFT: ±2 kV
16. Conducted low Surge: ±1 kV
17. Conducted radio
frequency
18. Electrical fast
transient / burst
19. Surge
RE: 30 MHz ~ 1 GHz

ESD: ±8 kV
Electronic Interlocking
KRS SG 0015-09 Device
materials and 10 V/m SF-3 N
(R) 4.7 Electromagnetic
compatibility test Surge: ±2 kV
10 V
RE: 30 MHz ~ 1 GHz

ESD: ±8 kV
10 V
Electrical
materials and CE: 150 kHz ~ 30 MHz SF-2 N
components compatibility test

ESD: ±8 kV
Electronic Interlocking RS: 80 MHz ~ 2.7 GHz
Electrical
KRS SG 0015-09 Device 10 V/m
materials and BS N
(R) 4.7 Electromagnetic EFT: ±2 kV
components compatibility test Surge: ±2 kV
10 V
347/433
No. KT393

RE: 30 MHz ~ 1 GHz
ESD: ±8 kV
(R) : 2014 4.7.3 Electromagnetic
10 V
RE: 30 MHz ~ 1 GHz

ESD: ±8 kV
Electrical 10 V/m
materials and EFT: ±2 kV SF-1 N
(R) : 2014 4.7.3 Electromagnetic
compatibility test CS: 150 kHz ~ 80 MHz
10 V
M/F: 300 A/m
PLUSE M/F: 300 A/m
Electrical
KRS SG 0015-14 Device CE: 150 kHz ~ 30 MHz
(R) : 2014 4.7.3 Electromagnetic RE: 30 MHz ~ 1 GHz
components compatibility test

ESD: ±8 kV
Electronic Interlocking RS: 80 MHz ~ 2.5 GHz
Electrical
KRS SG 0015-14 Device 10 V/m
materials and BS N
(R) : 2014 4.7.3 Electromagnetic EFT: ±2 kV
components compatibility test Surge: ±2 kV
10 V
ESD: ±15 kV
10 V/m
166 MHz ~ 1,000
MHz 30 V/m
1,429 MHz ~ 1,516
MHz 30 V/m
Electromagnetic 1,710 MHz ~ 1,785
Electrical compatibility — Product MHz 30 V/m
KS B 6945:2019 materials and family standard for lifts, SF-3 N
1,840 MHz ~ 2,170
components escalators and moving MHz 10 V/m
walks — Immunity 2,300 MHz ~ 2,655
MHz 10 V/m
EFT: ±4 kV
Surge: ±2.5 kV
10 V
V-DIP: max 100 %
348/433
No. KT393

ESD: ±15 kV
Electromagnetic EFT: ±4 kV
Electrical compatibility — Product Surge: ±2.5 kV
KS B 6945:2019 materials and family standard for lifts, BS N
components escalators and moving 10 V
walks — Immunity V-DIP: max 100 %
ESD: ±15 kV
Electromagnetic EFT: ±4 kV
Electrical compatibility — Product Surge: ±2.5 kV
KS B 6945:2019 materials and family standard for lifts, SF-1 N
components escalators and moving 10 V
walks — Immunity V-DIP: max 100 %
Electromagnetic
Electrical compatibility — Product RE : 30 MHz ∼ 1 GHz
KS B 6955:2019 materials and family standard for lifts, CE : 150 kHz ∼ 30 SF-1 N
components escalators and moving MHz
walks — Emission
Electromagnetic
Electrical compatibility — Product
KS B 6955:2019 materials and family standard for lifts, CE : 150 kHz ∼ 30 BS N
walks — Emission
Electromagnetic
walks — Emission
Electromagnetic
walks — Emission
RE: 30 MHz ~ 1 GHz

ESD: ±8 kV
Uninterruptible power RS: 80 MHz ~ 2.7 GHz
Electrical systems (UPS) - Part 2: 10 V/m
KS C 9040-2:2017 materials and Electromagnetic EFT: ±2 kV SF-3 N
10 V
V-DIP: max 100 %
M/F: 30 A/m
Electrical systems (UPS) - Part 2: RE: 30 MHz ~ 1 GHz
KS C 9040-2:2017 materials and Electromagnetic SF-2 N
requirements
349/433
No. KT393

RE: 30 MHz ~ 1 GHz
ESD: ±8 kV
KS C 9040-2:2017 materials and Electromagnetic EFT: ±2 kV SF-1 N
10 V
V-DIP: max 100 %
M/F: 30 A/m

ESD: ±8 kV
KS C 9040-2:2017 materials and Electromagnetic EFT: ±2 kV BS N
10 V
V-DIP: max 100 %
ESD: ±8 kV
V/m
KS C 9547:2020 materials and lighting purposes -EMC SF-3 N
Surge: ±2 kV
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
KS C 9547:2020 materials and lighting purposes -EMC Surge: ±2 kV SF-1 N
3V
V-DIP: max 100 %
M/F: 1 A/m
ESD: ±8 kV
V/m
KS C 9547:2020 materials and lighting purposes -EMC BS N
Surge: ±2 kV
3V
V-DIP: max 100 %
Compatibility levels for

low-frequency
KS C 9610-2- Electrical
materials and conducted disturbances 3Φ, (0 ∼ 620) V
2:2017 (MOD IEC SF-1 N
61000-2-2) components low-voltage power
supply systems
350/433
No. KT393

Electromagnetic
KS C 9610-2- Electrical t LFCD: Frequency : (0 ∼
4:2017 (MOD IEC materials and 2－4：Environment－Lo 9) kHz SF-1 N
61000-2-4) components w frequency conformity max 35 kV
levels in industrial
distribution
Electromagnetic
compatibility (EMC)－
Part 3－11: Limits -
changes, voltage
Electrical
KS C 9610-3- materials and fluctuations and flicker Harmonic: 16 A ＜ I ≤ SF-3 N
11:2017 in public low－voltage 75 A
components supply systems -
connection
Electromagnetic
compatibility (EMC)－
Part 3－11: Limits -
changes, voltage
Electrical
KS C 9610-3- materials and fluctuations and flicker Harmonic: 16 A ＜ I ≤ SF-1 N
11:2017 in public low－voltage 75 A
components supply systems -
connection
Electromagnetic
compatibility (EMC) —
Part 3—12: Limits —
Limits for harmonic
Electrical
KS C 9610-3- materials and currents produced by
connected to Flicker: 16 A ＜ I ≤ 75 A SF-1 N
12:2017 equipment
components public low—voltage
systems with input
current > 16 A and ≤ 75
A per phase
Electromagnetic
Limits for harmonic
Electrical
KS C 9610-3- materials and currents produced by
connected to Flicker: 16 A ＜ I ≤ 75 A SF-3 N
12:2017 equipment
components public low—voltage
systems with input
current > 16 A and ≤ 75
A per phase
351/433
No. KT393

Electromagnetic
compatibility(EMC) —
Part 3—2： Limits —
Electrical
KS C 9610-3- materials and Limits for harmonic Harmonic: max 16 A SF-2 N
2:2017 current
components emissions(equipment
input current ≤ 16 A per
phase)
Electromagnetic
Electrical
2:2017 current
phase)
Electromagnetic
Electrical
2:2017 current
phase)
Electromagnetic
changes, voltage
Electrical
KS C 9610-3- materials and fluctuations and flicker Flicker: max 16 A SF-2 N
3:2017 in public low — voltage
Electromagnetic
changes, voltage
Electrical
352/433
No. KT393

Electromagnetic
changes, voltage
Electrical
Testing and
measurement
materials and techniques - Voltage
11(MOD IEC V-DIP: max 100 % BS N
dips, short interruptions
61000-4-11) components and voltage variations
immunity tests
Testing and
measurement
11(MOD IEC V-DIP: max 100 % SF-1 N
immunity tests
Testing and
measurement
11(MOD IEC V-DIP: max 100 % SF-3 N
immunity tests
Electromagnetic
compatibility(EMC) -
KS C 9610-4- Electrical Part 4-2 : Testing and
2(MOD IEC materials and measurement ESD: max ±8 kV BS N
61000-4-2) components techniques -
Electrostatic discharge
immunity test
Electromagnetic
2(MOD IEC materials and measurement ESD: max ±8 kV SF-1 N
immunity test
Electromagnetic
2(MOD IEC materials and measurement ESD: max ±8 kV SF-3 N
immunity test
353/433
No. KT393

Electromagnetic
Part 4-3 : Testing and
materials and measurement RS: 80 MHz ∼ 6 GHz,
3(MOD IEC BS N
components techniques - Radiated 30 V/m
61000-4-3) radio-frequency,
immunity test
Electromagnetic
3(MOD IEC SF-3 N
immunity test
Electromagnetic
3(MOD IEC SF-1 N
immunity test
Electromagnetic
4(MOD IEC materials and measurement EFT: max ±4 kV SF-3 N
61000-4-4) components techniques - Electrical
fast transient/burst
immunity test
Electromagnetic
4(MOD IEC materials and measurement EFT: max ±4 kV SF-1 N
immunity test
Electromagnetic
4(MOD IEC materials and measurement EFT: max ±4 kV BS N
immunity test
Electromagnetic
materials and Part 4 : Testing and
5(MOD IEC SURGE: max ±4 kV SF-3 N
measurement
61000-4-5) components techniques - Section 5 :
Surge immunity test
354/433
No. KT393

Electromagnetic
5(MOD IEC SURGE: max ±4 kV SF-1 N
measurement
Surge immunity test
Electromagnetic
5(MOD IEC SURGE: max ±4 kV BS N
measurement
Surge immunity test
Electromagnetic
materials and measurement CS: 150 kHz ∼ 230
6(MOD IEC SF-1 N
techniques - Immunity MHz, 10 V
61000-4-6) components to conducted
Electromagnetic
6(MOD IEC BS N
Electromagnetic
6(MOD IEC SF-3 N
Electromagnetic
8(MOD IEC materials and measurement MF: max 30 A/m SF-1 N
61000-4-8) components techniques - Power
immunity test
ESD: ±8 kV
compatibility(EMC) — 3 V/m
Electrical
KS C 9610-6- materials and Part 6-1: Generic EFT: ±1 kV SF-3 N
1:2019 standards — Immunity SURGE: ±2 kV
components for residential, CS: 150 kHz ∼ 80
commercial and light- MHz, 3 V
industrial environments V-DIP: max 100 %
355/433
No. KT393

ESD: ±8 kV
KS C 9610-6- materials and Part 6-1: Generic SURGE: ±2 kV SF-1 N
1:2019 standards — Immunity
MHz, 3 V
commercial and light- M/F: 3 A/m
ESD: ±8 kV
compatibility(EMC) — 3 V/m
Electrical
KS C 9610-6- materials and Part 6-1: Generic EFT: ±1 kV BS N
1:2019 standards — Immunity SURGE: ±2 kV
commercial and light- MHz, 3 V
ESD: ±8 kV
Electrical
KS C 9610-6- compatibility: Generic EFT: ±1 kV
2:2019 standards-Immunity for SURGE: ±2 kV
MHz, 10 V
V-DIP: max 100 %
ESD: ±8 kV
10 V/m
Electromagnetic
KS C 9610-6- compatibility: Generic
materials and SURGE: ±2 kV SF-1 N
2:2019 standards-Immunity for
components CS: 150 kHz ∼ 80
industrial environments MHz, 10 V
M/F: 30 A/m
V-DIP: max 100 %
ESD: ±8 kV
Electrical
KS C 9610-6- compatibility: Generic EFT: ±1 kV
materials and BS N
2:2019 standards-Immunity for SURGE: ±2 kV
MHz, 10 V
V-DIP: max 100 %
Electromagnetic
compatibility (EMC)–
KS C 9610-6- RE : 9 kHz ∼ 6 GHz
materials and standards – Emission SF-3 N
3:2017 components standard for equipment CE : 9 kHz ∼ 30 MHz
in residential
environments
356/433
No. KT393

Electromagnetic
KS C 9610-6- RE : 9 kHz ∼ 6 GHz
in residential
environments
Electromagnetic
KS C 9610-6- materials and standards – Emission CE : 9 kHz ∼ 30 MHz BS N
3:2017 components standard for equipment
in residential
environments
Electromagnetic
KS C 9610-6- RE : 9 kHz ∼ 6 GHz
in residential
environments
Electromagnetic
compatibility (EMC)
Electrical
KS C 9610-6- materials and standards RE : 9 kHz ∼ 6 GHz SF-3 N
3:2017 components –residential,
commercial
environments
Electromagnetic
compatibility (EMC)
Electrical
KS C 9610-6- materials and standards CE : 9 kHz ∼ 30 MHz BS N
commercial
environments
Electromagnetic
compatibility (EMC)
Electrical
commercial
environments
Electromagnetic
compatibility (EMC)
Electrical
commercial
environments
357/433
No. KT393

Electromagnetic
Electrical
KS C 9610-6- compatibility (EMC)
materials and CE : 9 kHz ∼ 30 MHz BS N
4:2017 – Emission standard for
components industrial environments
Electromagnetic
Electrical
KS C 9610-6- compatibility (EMC) RE : 9 kHz ∼ 6 GHz
4:2017 – Emission standard for CE : 9 kHz ∼ 30 MHz
Electromagnetic
Electrical
Electromagnetic
Electrical
Electromagnetic
Electrical
KS C 9610-6- materials and Part 6-4: Generic CE : 9 kHz ∼ 30 MHz BS N
4:2017 standards – Emission
environments
Electromagnetic
Electrical
KS C 9610-6- materials and Part 6-4: Generic RE : 9 kHz ∼ 6 GHz SF-2 N
4:2017 standards – Emission CE : 9 kHz ∼ 30 MHz
environments
Electromagnetic
Electrical
environments
Electromagnetic
Electrical
environments

ESD: ±8 kV
Electrical electrical power drive 10 V/m
KS C 9800-3:2017 materials and systems-Part 3: EMC EFT: ±2 kV BS N
components requirements and Surge: ±2 kV
3V
V-DIP: max 100 %
358/433
No. KT393

RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
KS C 9800-3:2017 materials and systems-Part 3: EMC SF-1 N
EFT: ±2 kV
3V
V-DIP: max 100 %
Adjustable speed
Electrical electrical power drive CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
components requirements and
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
EFT: ±2 kV
3V
V-DIP: max 100 %

medical equipment -
Radio frequency
Electrical
KS C 9811(MOD materials and disturbance RE: 9 kHz ∼ 6 GHz SF-3 N
CISPR11) components Acceptance criteria and CE: 9 kHz ∼ 30 MHz
characteristics -
methods of
measurement

medical equipment -
Radio frequency
Electrical
characteristics -
methods of
measurement

medical equipment -
Radio frequency
Electrical
characteristics -
methods of
measurement
359/433
No. KT393

medical equipment -
Radio frequency
Electrical
KS C 9811(MOD materials and disturbance BS N
CISPR11) components characteristics - CE: 9 kHz ∼ 30 MHz
Acceptance criteria and
methods of
measurement
Electromagnetic
compatibility -
KS C 9814-1:2020 materials and household appliances, CE : 150 kHz ∼ 30 SF-3 N
apparatus - Part 1:
Emission
Electromagnetic
compatibility -
Electrical Requirements for CE : 150 kHz ∼ 30
KS C 9814-1:2020 materials and household appliances, MHz SF-2 N
components electric tools and similar RE : 30 MHz ∼ 1 GHz
apparatus - Part 1:
Emission
Electromagnetic
compatibility -
apparatus - Part 1:
Emission
Electromagnetic
compatibility -
KS C 9814-1:2020 materials and household appliances, BS N
apparatus - Part 1:
Emission
Electromagnetic
apparatus — Part 1:
Emission
Electromagnetic
Emission
360/433
No. KT393

Electromagnetic
KS C 9814-1:2022 materials and household appliances, SF-2 N
Emission
Electromagnetic
components electric tools and similar CE: 150 kHz ∼ 30 MHz
Emission
ESD: ±8 kV
compatibility - 3 V/m
Electrical Requirements for EFT: ±1 kV
SURGE: ±2 kV
components electric tools and similar CS: 150 kHz ∼ 230
apparatus - Part 2: MHz, 3 V
ESD: ±8 kV
SURGE: ±2 kV
ESD: ±8 kV
SURGE: ±2 kV
Electromagnetic
compatibility - ESD: ±8 kV
Requirements for RS: 80 MHz ∼ 6 GHz,
household appliances, 3 V/m
Electrical
materials and electric tools and similar EFT: ±1 kV
KS C 9814-2:2022 SF-3 N
apparatus SURGE: ±2 kV
components - Part 2: Immunity - CS: 150 kHz ∼ 230
Product family standard MHz, 3 V
[Exception] V-DIP: max 100 %
- Annex B
361/433
No. KT393

Electromagnetic
Electrical
KS C 9814-2:2022 SF-1 N
- Annex B
Electromagnetic
Electrical
KS C 9814-2:2022 BS N
- Annex B
Measurement
acceptance criteria and
methods of
Electrical
KS C 9815(MOD materials and measurement of radio BS N
CISPR15) disturbance CE: 9 kHz ∼ 30 MHz
similar equipment
Measurement
methods of
Electrical
KS C 9815(MOD materials and measurement of radio RE: 9 kHz ∼ 1 GHz SF-3 N
similar equipment
Measurement
methods of
Electrical
similar equipment
Measurement
methods of
Electrical
similar equipment
362/433
No. KT393

disturbance and
immunity measuring
Electrical
KS C 9816-2- materials and –measurement
Part 2-1: Methods of 9 kHz ∼ 30 MHz SF-1 N
1:2020 of
immunity – Conducted
disturbance
measurements

disturbance and
immunity measuring
Electrical
Part 2-1: Methods of 9 kHz ∼ 30 MHz BS N
1:2020 of
disturbance
measurements

disturbance and
immunity measuring
Electrical
1:2020 of
disturbance
measurements

disturbance and
immunity measuring
Electrical
1:2020 of
disturbance
measurements

disturbance and
immunity measuring
Electrical
2:2020 of
immunity –
Measurement of
disturbance power
363/433
No. KT393

disturbance and
immunity measuring
Electrical
Part 2-2: Methods of 9 kHz ∼ 30 MHz BS N
2:2020 of
immunity –
Measurement of
disturbance power

disturbance and
immunity measuring
Electrical
2:2020 of
immunity –
Measurement of
disturbance power

disturbance and
immunity measuring
Electrical
2:2020 of
immunity –
Measurement of
disturbance power

disturbance and
immunity measuring
Electrical
Part 2-3: Methods of 9 kHz ∼ 18 GHz SF-1 N
3:2020 of
immunity – Radiated
disturbance
measurements

disturbance and
immunity measuring
Electrical
3:2020 of
disturbance
measurements
364/433
No. KT393

disturbance and
immunity measuring
Electrical
3:2020 of
disturbance
measurements

disturbance and
immunity measuring
KS C 9816-2- materials and - Part 2-4: Methods of 9 kHz ∼ 18 GHz SF-2 N
4:2017 components measurement of
disturbances and
immunity - Immunity
measurements

disturbance and
immunity measuring
disturbances and
immunity - Immunity
measurements

disturbance and
immunity measuring
disturbances and
immunity - Immunity
measurements
Electromagnetic
compatibility of
KS C 9832:2019 materials and CE : 150 kHz ∼ 30 SF-3 N
multimedia equipment
components MHz
–Emission requirements
Electromagnetic
compatibility of
components MHz
Electromagnetic
compatibility of
components MHz
Electromagnetic
Electrical compatibility of CE : 150 kHz ∼ 30
KS C 9832:2019 materials and BS N
multimedia equipment MHz
components –Emission requirements
365/433
No. KT393

ESD: ±8 kV
V/m
Electromagnetic
KS C 9835:2019 equipment – Surge: ±2 kV SF-1 N
V-DIP: max 100 %
M/F: 1 A/m
ESD: ±8 kV
Electromagnetic V/m
Electrical
materials and multimedia equipment – EFT:
KS C 9835:2019 SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic V/m
Electrical
materials and multimedia equipment – EFT:
KS C 9835:2019 BS N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %

Electrical associated equipment – RE: 30 MHz ∼ 18 GHz
KS C CISPR materials and Radio disturbance CE : 150 kHz ∼ 30 SF-2 N
13:2011 components characteristics – Limits MHz
and methods of
measurement

Electrical associated equipment –
KS C CISPR materials and Radio disturbance CE : 150 kHz ∼ 30 BS N
and methods of
measurement

and methods of
measurement

and methods of
measurement
366/433
No. KT393

Electrical
KS C CISPR materials and associated equipment — RS : 900 MHz SF-3 N
20:2014 Immunity characteristics EFT : ±1 kV
components — Limits and methods of V-DIP: max 100 %
measurement

Electrical
KS C CISPR materials and associated equipment — RS : 900 MHz SF-1 N
20:2014 Immunity characteristics EFT : ±1 kV
components — Limits and methods of V-DIP: max 100 %
measurement
Sound and television ESD : ±8 kV

Electrical RS : 900 MHz
KS C CISPR materials and associated equipment — EFT : ±1 kV BS N
20:2014 Immunity characteristics
components — Limits and methods of S1, s2a, s2b, S3, S4
V-DIP: max 100 %
measurement
equipment - Radio
KS C CISPR materials and disturbance CE : 150 kHz ∼ 30 SF-3 N
22:2011 characteristics - Limits
measurement
equipment - Radio
22:2011 components characteristics - Limits MHz
and methods of
measurement
equipment - Radio
22:2011 characteristics - Limits
measurement
equipment - Radio
Electrical
KS C CISPR materials and disturbance CE : 150 kHz ∼ 30 BS N
22:2011 components characteristics - Limits MHz
and methods of
measurement
ESD: ±8 kV
V/m
Electrical equipment — Immunity
KS C CISPR materials and characteristics — Limits EFT: ±1 kV SF-3 N
24:2014 Surge: ±2 kV
components and methods of CS: 150 kHz ~ 80 MHz
measurement 3V
V-DIP: max 100 %
367/433
No. KT393

ESD: ±8 kV
V/m
KS C CISPR materials and characteristics — Limits EFT: ±1 kV BS N
24:2014 Surge: ±2 kV
measurement 3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
KS C CISPR materials and characteristics — Limits EFT: ±1 kV SF-1 N
24:2014 Surge: ±2 kV
measurement 3V
V-DIP: max 100 %
RE: 30 MHz ~ 1 GHz

Electrical ships -
KS C IEC 60092- 10 V/m
materials and Part 504: Special SF-3 N
504 :2007 EFT: ±2 kV
components features - Control and Surge: ±2 kV
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 1 GHz

Electrical ships -
KS C IEC 60092- 10 V/m
504 :2007 EFT: ±2 kV
components features - Control and Surge: ±2 kV
10 V
V-DIP: max 100 %
Electrical ships -
KS C IEC 60092- CE: 150 kHz ~ 30 MHz
504 :2007 RE: 30 MHz ~ 1 GHz
components features - Control and
instrumentation

ESD: ±8 kV
Electrical installations in RS: 80 MHz ~ 2.7 GHz
Electrical ships - 10 V/m
KS C IEC 60092- materials and Part 504: Special EFT: ±2 kV BS N
504 :2007 components features - Control and Surge: ±2 kV
10 V
V-DIP: max 100 %
368/433
No. KT393

RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
Electrical 10 V/m
KS C IEC materials and installations in ships – EFT: ±2 kV SF-3 N
60533:2003 components Electromagnetic Surge: ±2 kV
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
Electrical
KS C IEC installations in ships – 10 V/m
materials and Electromagnetic SF-1 N
60533:2003 EFT: ±2 kV
10 V
V-DIP: max 100 %

Electrical
KS C IEC installations in ships – RE: 30 MHz ~ 6 GHz
60533:2003 Electromagnetic CE: 150 kHz ~ 30 MHz

ESD: ±8 kV
Electrical 10 V/m
KS C IEC materials and installations in ships – EFT: ±2 kV BS N
60533:2003 Electromagnetic
10 V
V-DIP: max 100 %

V
Surge: ±6 ㎸
ESD: ±15 ㎸
KS C IEC materials and Electronic equipment RS: 80 MHz ~ 6 GHz, SF-1 N
60571:2012 components used on rolling stock 20 V/m
CS: 0.15 MHz ~ 80
MHz, 10 V
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
369/433
No. KT393

V
Surge: ±6 ㎸
ESD: ±15 ㎸
KS C IEC materials and Electronic equipment RS: 80 MHz ~ 6 GHz, SF-3 N
60571:2012 components used on rolling stock 20 V/m
CS: 0.15 MHz ~ 80
MHz, 10 V
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
Surge: ±4 ㎸
ESD: ±15 ㎸
Burst: ±4 ㎸
Electrical Railway applications —
KS C IEC RS: 80 MHz ~ 6 GHz,
materials and Electronic equipment BS N
60571:2012 20 V/m
components used on rolling stock CS: 0.15 MHz ~ 80
MHz, 10 V
CE: 9 kHz ~ 30 MHz

Electrical 10 V/m
KS C IEC 60601-1- materials and safety and essential EFT: ±1 kV BS N
2:2020 performance –
CS: 150 kHz ~ 80 MHz,
Medical electrical
equipment –
Part 1-2: General
Electrical
KS C IEC 60601-1- materials and safety and essential RE: 30 MHz ~ 6 GHz SF-2 N
2:2020 performance – CE: 150 kHz ~ 30 MHz
Electromagnetic
disturbances –
RE: 30 MHz ~ 6 GHz

Electrical
KS C IEC 60601-1- materials and safety and essential EFT: ±1 kV SF-1 N
2:2020 performance – Surge: ±2 kV
components Collateral Standard: CS: 150 kHz ~ 80 MHz,
kHz ~ 26 MHz
370/433
No. KT393

Electrical
KS C IEC 60601-1- materials and safety and essential 10 V/m SF-3 N
2:2020 performance – EFT: ±1 kV
Electromagnetic
t 4-13:
Testing and
KS C IEC 61000-4- materials and techniques - Harmonics InterHarmonics: max SF-3 N
13:2010 16 A
components and interharmonics
including mains
signalling at a.c. power
port, low frequency
immunity tests
Electromagnetic
t 4-13:
Testing and
KS C IEC 61000-4- materials and techniques - Harmonics InterHarmonics: max SF-1 N
13:2010 16 A
components and interharmonics
including mains
signalling at a.c. power
port, low frequency
immunity tests
Electromagnetic
measurement
Electrical
KS C IEC 61000-4- materials and techniques - Test for
conducted, 0 Hz ∼ 150 kHz SF-3 N
16:2013 immunity to
components common mode
disturbances in the
150 kHz
Electromagnetic
compatibility (EMC)–Part
4-34: Testing and
Electrical
KS C IEC 61000-4- materials and measurement Ripple: max Ud.c. 15 SF-1 N
17:2010 techniques %
components - Ripple on d.c. input
power port immunity
test
371/433
No. KT393

Electromagnetic
KS C IEC 61000-4- materials and techniques - Voltage V-DIP: max 100 % SF-1 N
29:2014 components dips, short interruptions
and voltage variations
on d.c. input power port
immunity tests
Electromagnetic
KS C IEC 61000-4- materials and techniques - Voltage V-DIP: max 100 % SF-3 N
29:2014 components dips, short interruptions
on d.c. input power port
immunity tests
Testing and
measurement
techniques – Voltage
Electrical dips, short interruptions V-DIP: max 440 V, 100
KS C IEC 61000-4- materials and and voltage variations SF-1 N
34:2016 %
components immunity tests for
per phase

Electrical
KS X 3124:2020 SF-3 N
standard for radio Surge: ±2 kV
Part 1: Common 3V

Electrical
KS X 3124:2020 SF-1 N
standard for radio Surge: ±2 kV
Part 1: Common 3V
372/433
No. KT393

Electromagnetic
spectrum Matters
(ERM);
Electrical
materials and ElectroMagnetic CE: 150 kHz ~ 30 MHz
KS X 3124:2020 SF-2 N
components standard for radio
Part 1: Common

compatibility and Radio ESD: ±8 kV
spectrum Matters RS: 80 MHz ~ 6 GHz 3
(ERM);
Electrical V/m
KS X 3124:2020 materials and ElectroMagnetic EFT: ±1 kV BS N
components Compatibility (EMC) Surge: ±2 kV
standard for radio CS: 150 kHz ~ 80 MHz
equipment and services; 3V
Part 1: Common V-DIP: max 100 %

ESD: ±8 kV
EMC Test Methods for RS: 80 MHz ~ 6 GHz
Electrical Cellular Communication 10 V/m
KS X 3129:2020 materials and Mobile and Ancillary SF-3 N
EFT: ±1 kV
components Equipment Surge: ±2 kV
3V
V-DIP: max 100 %

ESD: ±8 kV
Electrical Cellular Communication 10 V/m
KS X 3129:2020 materials and Mobile and Ancillary SF-1 N
EFT: ±1 kV
components Equipment Surge: ±2 kV
3V
V-DIP: max 100 %
EMC Test Methods for

Electrical Cellular Communication CE: 150 kHz ∼ 30 MHz
KS X 3129:2020 materials and SF-2 N
Mobile and Ancillary RE: 30 MHz ∼ 6 GHz
components Equipment

ESD: ±8 kV
Electrical 10 V/m
materials and Cellular Communication EFT: ±1 kV
KS X 3129:2020 BS N
components Mobile and Ancillary Surge: ±2 kV
Equipment CS: 150 kHz ~ 80 MHz
3V
V-DIP: max 100 %
373/433
No. KT393

Electrical disturbance RE : 9 kHz ∼ 1 GHz
KS X 3143:2020 materials and characteristics of SF-3 N
components wireless power transfer
for household
appliances

for household
appliances

for household
appliances

KS X 3143:2020 materials and characteristics of CE : 9 kHz ∼ 30 MHz BS N
for household
appliances
Mercedes-Benz
Company Standard
EMC Performance
Requirements –
Component Tests
(Passenger Cars and
Vans) AN : 150 kHz ∼ 108
[Exception] MHz
Electrical 9 Magnetic field RE : 150 kHz ∼ 6 GHz
MBN 10284- materials and emissions: Measurement NFA : 520 kHz ∼ 5 925 SF-2 N
2:2019 components with isotropic test probe MHz
(ICNIRP B test) RI(ALSE) : 200 MHz ∼
10 Magnetic field 6 GHz, 140 V/m
emissions: Measurement
with current clamp
(ICNIRP I test)
15 RF immunity –
Reverberation chamber
(CRC test)
374/433
No. KT393

Mercedes-Benz
Company Standard
EMC Performance
Requirements –
Component Tests
(Passenger Cars and AN : 150 kHz ∼ 108
Vans) MHz
[Exception] RE : 150 kHz ∼ 6 GHz
Electrical 9 Magnetic field
MBN 10284- NFA : 520 kHz ∼ 5 925
materials and emissions: Measurement SF-1 N
2:2019 MHz
components with isotropic test probe TSUP : (-150 ∼ +100)
(ICNIRP B test) V
10 Magnetic field TOL : (-75 ∼ 60) V
emissions: Measurement
with current clamp
(ICNIRP I test)
15 RF immunity –
(CRC test)
Mercedes-Benz
Company Standard
EMC Performance AN : 150 kHz ∼ 108
Requirements – MHz
Component Tests RE : 150 kHz ∼ 6 GHz
(Passenger Cars and NFA : 520 kHz ∼ 5 925
Vans) MHz
[Exception] CTE : -150 V, +100 V
Electrical 9 Magnetic field
MBN 10284- BCI : 100 kHz ∼ 400
materials and emissions: Measurement BS N
2:2019 MHz, 106 dBμA
components with isotropic test probe LFM : (DC(0) ∼ 30)
(ICNIRP B test) kHz, 1 000 Am
10 Magnetic field TSUP : (-150 ∼ +100)
emissions: Measurement V
with current clamp TOL : (-75 ∼ 60) V
(ICNIRP I test) ESD : Max ±15 kV
15 RF immunity –
(CRC test)
375/433
No. KT393

MILITARY STANDARD
REQUIREMENTS FOR
THE CONTROL OF
ELECTROMAGNETIC
INTERFERENCE
EMISSIONS AND
SUSCEPTIBILITY
5.3.1 CE101,
Conducted emissions,
power leads, 30 Hz to
10 kHz
5.3.2 CE102,
Conducted emissions,
power leads, 10 kHz to
10 MHz
5.3.3 CE106,
Conducted emissions, CE101: 30 Hz ∼ 10
antenna terminal, 10 kHz
kHz to 40 GHz CE102: 10 kHz ∼ 10
5.3.4 CS101, Conducted MHz
susceptibility, power CE106: 10 kHz ∼ 40
leads, 30 Hz to 50 kHz GHz
5.3.9 CS114, Conducted CS101: 30 Hz ∼ 50
susceptibility, bulk cable kHz
Electrical injection, 10 kHz to 400 CS114: 10 kHz ∼ 400
MIL-STD- materials and MHz MHz SF-3 N
461D:1993 components 5.3.10 CS115, CS115: Impulse 5 A
Conducted CS116: 10 kHz ∼ 100
susceptibility, bulk cable MHz
injection, impulse RE101: 30 Hz ∼ 100
excitation kHz
5.3.11 CS116, RE102: 10 kHz ∼ 18
Conducted GHz
susceptibility, damped RS101: 30 Hz ∼ 100
sinusoidal transients, kHz
cables and power leads, RS103: 10 kHz ∼ 18
10 kHz to 100 MHz GHz
5.3.12 RE101, Radiated
emissions, magnetic
field, 30 Hz to 100 kHz
5.3.13 RE102, Radiated
emissions, electric field,
10 kHz to 18 GHz
5.3.15 RS101, Radiated
susceptibility, magnetic
5.3.16 RS103, Radiated
susceptibility, electric
field, 10 kHz to 18 GHz
[Exception]
10 kHz to 80 MHz, 200
V/m
376/433
No. KT393

DEPARTMENT OF
DEFENSE
INTERFACE STANDARD
REQUIREMENTS FOR
THE CONTROL OF
ELECTROMAGNETIC
INTERFERENCE
CHARACTERISTICS OF
SUBSYSTEMS AND
EQUIPMENT
5.4 CE101, Conducted
emissions, power leads,
30 Hz to 10 kHz
10 kHz to 10 MHz CE101: 30 Hz ∼ 10
5.6 CE106, Conducted kHz
emissions, antenna CE102: 10 kHz ∼ 10
terminal, 10 kHz to 40 MHz
GHz CE106: 10 kHz ∼ 40
5.7 CS101, Conducted GHz
susceptibility, power CS101: 30 Hz ∼ 150
leads, 30 Hz to 150 kHz kHz
5.12 CS114, Conducted
Electrical CS114: 10 kHz ∼ 200
MIL-STD- materials and susceptibility, bulk cable MHz SF-3 N
461E:1999 injection, 10 kHz to 200
components MHz CS115: Impulse 5 A
CS116: 10 kHz ∼ 100
5.13 CS115, Conducted MHz
susceptibility, bulk cable RE101: 30 Hz ∼ 100
injection, impulse kHz
excitation RE102: 10 kHz ∼ 18
5.14 CS116, Conducted GHz
susceptibility, damped RS101: 30 Hz ∼ 100
sinusoidal transients, kHz
cables and power leads, RS103: 2 MHz ∼ 18
10 kHz to 100 MHz GHz
5.15 RE101, Radiated
emissions, magnetic
10 kHz to 18 GHz
5.18 RS101, Radiated
field, 2 MHz to 18 GHz
[Exception]
2 MHz to 80 MHz, 200
V/m
377/433
No. KT393

DEPARTMENT OF
DEFENSE
INTERFACE STANDARD
REQUIREMENTS FOR
THE CONTROL OF
ELECTROMAGNETIC
INTERFERENCE
CHARACTERISTICS OF
SUBSYSTEMS AND
EQUIPMENT
30 Hz to 10 kHz
10 kHz to 10 MHz
5.6 CE106, Conducted CE101: 30 Hz ∼ 10
emissions, antenna kHz
terminal, 10 kHz to 40 CE102: 10 kHz ∼ 10
GHz MHz
5.7 CS101, Conducted CE106: 10 kHz ∼ 40
susceptibility, power GHz
leads, 30 Hz to 150 kHz CS101: 30 Hz ∼ 150
5.11 CS106, Conducted kHz
susceptibility, transients, CS106: 400 Vpeak
Electrical power leads
MIL-STD- CS114: 4 kHz ∼ 200
materials and 5.13 CS114, Conducted SF-3 N
461F:2007 MHz
components susceptibility, bulk cable CS115: Impulse 5 A
injection, 10 kHz to 200 CS116: 10 kHz ∼ 100
MHz MHz
5.14 CS115, Conducted RE101: 30 Hz ∼ 100
susceptibility, bulk cable kHz
injection, impulse RE102: 10 kHz ∼ 18
excitation GHz
5.15 CS116, Conducted RS101: 30 Hz ∼ 100
susceptibility, damped kHz
sinusoidal transients, RS103: 2 MHz ∼ 18
cables and power leads, GHz
10 kHz to 100 MHz
emissions, magnetic
10 kHz to 18 GHz
field, 2 MHz to 18 GHz
[Exception]
V/m
378/433
No. KT393

DEPARTMENT OF
DEFENSE
INTERFACE STANDARD
REQUIREMENTS FOR
THE CONTROL OF
ELECTROMAGNETIC
INTERFERENCE
CHARACTERISTICS OF
SUBSYSTEMS AND
EQUIPMENT
5.4 CE101, conducted
emissions, audio
frequency currents,
power leads.
5.5 CE102, conducted
emissions, radio
frequency potential, CE101: 30 Hz ∼ 10
power leads. kHz
5.6 CE106, conducted CE102: 10 kHz ∼ 10
emissions, antenna port. MHz
5.7 CS101, conducted CE106: 10 kHz ∼ 40
susceptibility, power GHz
leads. CS101: 30 Hz ∼ 150
5.12 CS114, conducted kHz
susceptibility, bulk cable CS114: 4 kHz ∼ 200
injection. MHz
Electrical
MIL-STD- materials and 5.13 CS115, conducted CS115: Impulse 5 A SF-3 N
461G:2015 susceptibility, bulk cable CS116: 10 kHz ∼ 100
components injection, impulse MHz
excitation. CS117: Waveform 1, 2,
5.14 CS116, conducted 3, 4, 5A, 6, 7, 8
susceptibility, damped CS118: (±2 ∼ ±15) kV
sinusoidal transients, RE101: 30 Hz ∼ 100
cables and power leads. kHz
5.15 CS117, conducted RE102: 10 kHz ∼ 18
susceptibility, lightning GHz
induced transients, RS101: 30 Hz ∼ 100
cables and power leads. kHz
5.16 CS118, personnel RS103: 2 MHz ∼ 18
borne electrostatic GHz
discharge.
5.17 RE101, radiated
emissions, magnetic
field.
5.18 RE102, radiated
emissions, electric field.
5.20 RS101, radiated
field.
5.21 RS103, radiated
field.
[Exception]
V/m
379/433
No. KT393

SAC : Single Phase,
400 Hz, 115 V
TAC : Three Phase, 400
Hz, 115 V
SVF : Single Phase,
DEPARTMENT OF Variable Frequency,
DEFENSE 115 V
Electrical
MIL-STD-704F : materials and INTERFACE STANDARD TVF : Three Phase, SF-3 N
2004 AIRCRAFT ELECTRIC Variable Frequency,
components POWER 115 V
CHARACTERISTICS SXF : Single Phase, 60
Hz, 115 V
LDC : Low Voltage DC
(28 VDC)
HDC : High Voltage DC
(270 VDC)
RE01 : 1 Hz ∼ 400
MHz
RE02 : 9 kHz ∼ 30
Volvo Car Corporation- MHz
VCG EMC: Component RE03 : 100 kHz ∼ 6
Electrical Requirements GHz
REQ-043878:2014 materials and Electromagnetic SF-2 N
RE04 : 500 kHz ∼ 320
components Compatibility MHz
Specification RI03 : 200 MHz ∼ 6
Components GHz, 600 V/m
RI04 : 140 MHz ∼ 2
700 MHz, 14 W
RE01 : 1 Hz ∼ 400
MHz
Volvo Car Corporation- RE02 : 9 kHz ∼ 30
VCG EMC: Component MHz
Electrical Requirements RE03 : 100 kHz ∼ 6
REQ-043878:2014 materials and Electromagnetic SF-1 N
GHz
components Compatibility RE04 : 500 kHz ∼ 320
Specification MHz
Components CI01 : (-150 ∼ +100) V
CI02 : (-150 ∼ 100) V
380/433
No. KT393

RE01 : 1 Hz ∼ 400
MHz
RE02 : 9 kHz ∼ 30
MHz
RE03 : 100 kHz ∼ 6
GHz
RE04 : 500 kHz ∼ 320
Volvo Car Corporation- MHz
VCG EMC: Component RI01 : (DC(0) ∼ 1)
Electrical Requirements MHz, 3 000 μT
REQ-043878:2014 materials and Electromagnetic RI02 : 100 kHz ∼ 400 BS N
components Compatibility MHz, 106 dBμA
Specification RI04 : 140 MHz ∼ 2
Components 700 MHz, 14 W
RI05 : 500 kHz ∼ 6
GHz, 30 dBμV
CE01 : -75 V, +50 V
CI01 : (-150 ∼ +100) V
CI02 : (-150 ∼ 100) V
ESD01 : Max ±8 kV
ESD02 : Max ±25 kV
381/433
No. KT393

Environmental
Conditions and Test
Procedures for Airborne
Equipment
Section 15.0 Magnetic
Effect
Section 16.0 Power
Input
Section 17.0 Voltage
Spike
Section 18.0 Audio
Frequency Conducted
Susceptibility - Power
Inputs
Section 19.0 Induced
Signal Susceptibility Dc = 1(One dgree)
Section 20.0 Radio AC : (100 ∼ 230) V
Frequency Susceptibility system (Harmonic,
(Radiated and Current modulation,
Conducted) Power factor, Inrush)
[Exception] DC : 14 V, 28 V, 270 V
20.6 Radiated System (Current ripple,
Susceptibility (RS) Test; Inrush current)
Alternate Procedure - CATEGORY A :
Reverberation Chamber E = 600 VOLTS
- Method CATEGORY B :
Section 21.0 Emission of E = 2 X LINE
Radio Frequency Energy VOLTAGE(AC RMS
Electrical
RTCA DO- materials and [Exception] AND/OR DC, OR 200 V SF-3 N
160G:2010 components 21.6 Radiated RF Whichever Is Less)
Emission - Reverberation 10 Hz ∼ 148.5936 kHz
Chamber (Max. 16 Vp-p)
Section 22.0 Lightning 350 Hz ∼ 32 kHz(Max.
Induced Transient 120 A-m, 5 400 V-m
Susceptibility CS : 10 kHz ∼ 400
Section 25.0 MHz
Electrostatic Discharge RS(ALSE) : 100 MHz ∼
[Exception] 18 GHz (Up to 200
Section 4.0 Temperature V/m)
and Altitude CE : 150 kHz ∼ 152
Section 5.0 Temperature MHz
Variation RE : 100 MHz ∼ 6 GHz
Section 6.0 Humidity Waveform 1, 2, 3, 4,
Section 7.0 Operational 5A, 5B, 6, 7, 8
Shocks and Crash Safety ±15 kV
Section 8.0 Vibration
Section 9.0 Explosion
Proofness
Section 10.0
Waterproofness
Section 11.0 Fluids
Susceptibility
Section 12.0 Sand and
Dust
Section 13.0 Fungus
Resistance
Section 14.0 Salt Spray
Section 23.0 Lightning
Direct Effects
382/433
No. KT393

Section 24.0 Icing
Section 26.0 Fire,
Flammability
Electrical Immunity to Conducted

SAE J1113- materials and Transients on Power (-600 ∼ +200) V SF-1 N
11:2007 components Leads
Electrical Immunity to Conducted

SAE J1113- materials and Transients on Power (-600 ∼ +200) V BS N
11:2007 components Leads
Electrical Interference by
Conduction and
Coupling - Capacitive
Electrical Inductive Coupling CCC : ±80 V
SAE J1113- materials and and DCC : ±30 V BS N
12:2006 via Lines Other than
components Supply Lines ICC : ±6 V
[Exception]
3.4 Chattering Relay
Electrical Interference by
Conduction and
Coupling - Capacitive
Electrical Inductive Coupling CCC : ±80 V
SAE J1113- materials and and DCC : ±30 V SF-1 N
12:2006 components via Lines Other than ICC : ±6 V
Supply Lines
[Exception]
3.4 Chattering Relay
Electromagnetic
Compatibility
Electrical Measurement Procedure
SAE J1113- materials and for Vehicle Max ±25 kV BS N
13:2004 components Components - Part 13:
Immunity to
Electrostatic Discharge
Electromagnetic
Compatibility
Measurement Procedure
for Vehicle
Electrical
SAE J1113- materials and Components - Part 21: 80 MHz ∼ 3.2 GHz, SF-2 N
21:2005 components Electromagnetic Fields, 100 V/m
Immunity to
30 MHz to 18 GHz,
Absorber-Lined
Chamber
Electromagnetic
Compatibility
Measurement Procedure
for Vehicle
Electrical
SAE J1113- materials and Components - Part 21: 80 MHz ∼ 3.2 GHz, BS N
21:2005 components Electromagnetic Fields, 100 V/m
Immunity to
30 MHz to 18 GHz,
Absorber-Lined
Chamber
383/433
No. KT393

Electromagnetic
Compatibility
Electrical Measurement Procedure
SAE J1113- materials and for Vehicle 15 Hz ∼ 30 kHz, 80 μT BS N
22:2003 components Components - Part 22:
Immunity to Radiated
Magnetic Fields
Limits and Methods of

Measurement of Radio
Disturbance
Characteristics of CE(Power Line) :
Components and 150 kHz ∼ 108 MHz
Electrical
SAE J1113- materials and Modules for the CE(Signal Line) : BS N
41:2006 Protection of Receivers 150 kHz ∼ 108 MHz
components Used On Board Vehicles RE : 150 kHz ∼ 960
[Exception] MHz
9. Radiated Emissions-
Component/ Module;
Tem Cell Method

Disturbance
Electrical
SAE J1113- materials and Modules for the CE(Signal Line) : SF-1 N
[Exception] MHz
Component/ Module;
Tem Cell Method

Disturbance
Electrical
SAE J1113- materials and Modules for the CE(Signal Line) : SF-2 N
[Exception] MHz
Component/ Module;
Tem Cell Method
Electromagnetic
Compatibility-
Electrical
SAE J1113- materials and Component Test -600 V, +200 V BS N
42:2006 Procedure
components Part 42-Conducted
Transient Emissions
Immunity to Radiated
Electrical Electromagnetic Fields - (1 ∼ 400) MHz, 100
SAE J1113-4:2004 materials and BS N
Bulk Current Injection mA
components (BCI) Method
384/433
No. KT393

medical equipment
Electrical -Radio-frequency
SANS 211:2010 materials and disturbance BS N
CE: 9 kHz ~ 30MHz
components characteristics -Limits
and methods of
measurement

medical equipment
Electrical -Radio-frequency RE: 9 kHz ~ 6 GHz
SANS 211:2010 materials and disturbance SF-1 N
CE: 9 kHz ~ 30MHz
and methods of
measurement

medical equipment
CE: 9 kHz ~ 30MHz
and methods of
measurement

medical equipment
CE: 9 kHz ~ 30MHz
and methods of
measurement

Electrical associated equipment RE: 30 MHz ~ 18 GHz
SANS 213:2011 materials and - Radio disturbance SF-3 N
-Limits and methods of
measurement

measurement

measurement
385/433
No. KT393

SANS 213:2011 materials and - Radio disturbance BS N
measurement
Electromagnetic
compatibility -
SANS 214-1 : materials and household appliances, BS N
2020 components electric tools and similar CE: 150 kHz ~ 30 MHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
SANS 214-1 : RE: 30 MHz ~ 1 GHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
SANS 214-1 : RE: 30 MHz ~ 1 GHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility -
SANS 214-1 : RE: 30 MHz ~ 1 GHz
apparatus
- Part 1: Emission
Electromagnetic
compatibility
Electrical - Requirements for
SANS 214-1:2009 materials and household appliances, BS N
apparatus Part
1:Emission
Electromagnetic
compatibility
Electrical - Requirements for RE: 30 MHz ~ 1 GHz
SANS 214-1:2009 materials and household appliances, SF-1 N
apparatus Part
1:Emission
386/433
No. KT393

Electromagnetic
compatibility
apparatus Part
1:Emission
Electromagnetic
compatibility
apparatus Part
1:Emission
compatibility RS: 80 MHz ~ 1 GHz
- Requirements for 3V/m
Electrical
SANS 214-2:2009 BS N
electric tools and similar Surge: ±2 kV
components apparatus Part CS: 150 kHz ~ 80 MHz
2:Immunity - Product 3V
family Standard V-DIP: max 100 %
Electrical
SANS 214-2:2009 SF-1 N
Electrical
SANS 214-2:2009 SF-3 N

Electrical
materials and disturbance RE: 9 KHz ~ 1000 MHz
SANS 215 : 2019 SF-3 N
components characteristics of CE: 9 kHz ~ 30 MHz
similar equipment

Electrical
SANS 215 : 2019 SF-2 N
similar equipment
387/433
No. KT393

Electrical
SANS 215 : 2019 SF-1 N
similar equipment

Electrical
SANS 215 : 2019 materials and disturbance BS N
similar equipment

Electrical
SANS 215:2009 SF-3 N
similar equipment

Electrical
SANS 215:2009 SF-2 N
similar equipment

Electrical
SANS 215:2009 SF-1 N
similar equipment

Electrical
SANS 215:2009 materials and disturbance BS N
similar equipment

broadcast receivers and ESD: ±8 kV
Electrical
materials and associated equipment - S5: 900 MHz 3 V/m
SANS 2200:2010 BS N
Immunity characteristics EFT: ±1 kV
components - Limits and methods of S1,s2a,s2b,S3,S4,S6
measurement

Electrical
SANS 2200:2010 SF-1 N
components - Limits and methods of EFT: ±1 kV
measurement
388/433
No. KT393

Electrical
SANS 2200:2010 SF-3 N
components - Limits and methods of EFT: ±1 kV
measurement
equipment
Electrical
materials and -characteristics
Radio disturbance
SANS 222:2009 BS N
components - Limits and methods of CE: 150 kHz ~ 30 MHz
measurement
equipment
Electrical
Radio disturbance RE: 30 MHz ~ 6 GHz
SANS 222:2009 SF-1 N
measurement
equipment
Electrical
SANS 222:2009 SF-2 N
measurement
equipment
Electrical
SANS 222:2009 SF-3 N
measurement
ESD: ±8 kV
equipment V/m
Electrical
Immunity EFT: ±1 kV
SANS 224:2010 BS N
Surge: ±2 kV
components - Limits and methods of CS: 150 kHz ~ 80 MHz
measurement 3V
V-DIP: max 100 %
ESD: ±8 kV
equipment V/m
Electrical
SANS 224:2010 SF-1 N
Surge: ±2 kV
measurement 3V
V-DIP: max 100 %
389/433
No. KT393

ESD: ±8 kV
equipment V/m
Electrical
SANS 224:2010 SF-3 N
Surge: ±2 kV
measurement 3V
V-DIP: max 100 %
Electromagnetic
SANS 2332:2017 materials and SF-3 N
Electromagnetic
Electromagnetic
Electromagnetic
SANS 2332:2017 materials and BS N
ESD: ±8 kV
V/m
Electromagnetic
SANS 2335 : 2018 equipment - Surge: ±2 kV SF-1 N
MF : 1 A/m
V-DIP: max 100 %
SD: ±8 kV
Electromagnetic V/m
Electrical
SANS 2335 : 2018 SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic V/m
Electrical
SANS 2335 : 2018 BS N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
390/433
No. KT393

Electrical 10 V/m
SANS 60601-1- materials and for safety – Collateral EFT: ±2 kV BS N
2:2014 standard :
Medical electrical
Electrical
SANS 60601-1- materials and for safety – Collateral RE: 30 MHz ~ 6 GHz SF-2 N
2:2014 standard : CE: 150 kHz ~ 30 MHz
components Electromagnetic
compatibility -
RE: 30 MHz ~ 6 GHz

Electrical 10 V/m
SANS 60601-1- materials and for safety – Collateral EFT: ±2 kV SF-1 N
2:2014 standard :
M/F: 3 A/m
RE: 30 MHz ~ 6 GHz

Electrical
SANS 60601-1- materials and for safety – Collateral 10 V/m SF-3 N
V-DIP: max 100 %
Electromagnetic
3-11:Limits - Limitation
of voltage changes,
Electrical voltage fluctuations and
SANS 61000-3- materials and flicker in public low- 16 A < I ≤75 A SF-3 N
11:2003 components voltage supply systems-
current ≤75 A and
connection
391/433
No. KT393

Electromagnetic
3-11:Limits - Limitation
of voltage changes,
SANS 61000-3- materials and flicker in public low- 16 A < I ≤75 A SF-1 N
11:2003 components voltage supply systems-
current ≤75 A and
connection
Electromagnetic
3-12:Limits - Limits for
Electrical harmonic currents
SANS 61000-3- materials and produced by equipment 16 A < I ≤75 A SF-3 N
12:2012 components connected to public
low-voltage systems
with input current>16 A
Electromagnetic
3-12:Limits - Limits for
Electrical harmonic currents
SANS 61000-3- materials and produced by equipment 16 A < I ≤75 A SF-1 N
12:2012 components connected to public
low-voltage systems
with input current>16 A
Electromagnetic
compatibility(EMC) Part
Electrical 3-2:Limits - Limits for
SANS 61000-3- materials and harmonic current max 16 A SF-3 N
2:2009 components emissions(equipment
input current ≤16 A per
phase)
Electromagnetic
phase)
Electromagnetic
phase)
392/433
No. KT393

Electromagnetic
3-3:Limits - Limitation of
voltage changes,
SANS 61000-3- materials and flicker in public low- max 16 A SF-2 N
3:2009 components voltage supply systems,
for equipment with
rated current≤16 a per
Electromagnetic
voltage changes,
for equipment with
Electromagnetic
voltage changes,
for equipment with
Electromagnetic
4-11:Testing and
Electrical
SANS 61000-4- materials and measurement V-DIP: max 100 % BS N
11:2005 components techniques - Voltage
immunity tests
Electromagnetic
4-11:Testing and
Electrical
SANS 61000-4- materials and measurement V-DIP: max 100 % SF-1 N
immunity tests
393/433
No. KT393

Electromagnetic
4-11:Testing and
Electrical
SANS 61000-4- materials and measurement V-DIP: max 100 % SF-3 N
immunity tests
Electromagnetic
Electrical 4-2:Testing and
SANS 61000-4- materials and measurement ESD: max ±8 kV SF-3 N
2:2009 components techniques -
immunity test
Electromagnetic
SANS 61000-4- materials and measurement ESD: max ±8 kV SF-1 N
immunity test
Electromagnetic
SANS 61000-4- materials and measurement ESD: max ±8 kV BS N
immunity test
Electromagnetic
4-3:Testing and
Electrical
SANS 61000-4- materials and measurement RS: max 80 MHz ~ 6 BS N
3:2008 techniques - Radiated, GHz
components radio - frequency,
immunity test
Electromagnetic
4-3:Testing and
Electrical
SANS 61000-4- materials and measurement RS: max 80 MHz ~ 6 SF-1 N
immunity test
Electromagnetic
4-3:Testing and
Electrical
SANS 61000-4- materials and measurement RS: max 80 MHz ~ 6 SF-3 N
immunity test
394/433
No. KT393

Electromagnetic
SANS 61000-4- materials and measurement EFT: max ±4 kV BS N
4:2011 components techniques - Electrical
immunity test
Electromagnetic
SANS 61000-4- materials and measurement EFT: max ±4 kV SF-1 N
immunity test
Electromagnetic
SANS 61000-4- materials and measurement EFT: max ±4 kV SF-3 N
immunity test
Electromagnetic
Electrical
SANS 61000-4- materials and 4-5:Testing and Surge: max ±4 kV BS N
5:2006 measurement
components techniques - Surge
immunity test
Electromagnetic
Electrical
SANS 61000-4- materials and 4-5:Testing and Surge: max ±4 kV SF-1 N
5:2006 measurement
immunity test
Electromagnetic
Electrical
SANS 61000-4- materials and 4-5:Testing and Surge: max ±4 kV SF-3 N
5:2006 measurement
immunity test
Electromagnetic
4-6: Testing and
Electrical
SANS 61000-4-6 : materials and measurement CS: max 150 kHz ~ 230 SF-1 N
2017 techniques - Immunity MHz 10 V
radio - frequency fields
395/433
No. KT393

Electromagnetic
4-6: Testing and
Electrical
SANS 61000-4-6 : materials and measurement CS: max 150 kHz ~ 230 BS N
Electromagnetic
4-6: Testing and
Electrical
SANS 61000-4-6 : materials and measurement CS: max 150 kHz ~ 230 SF-3 N
Electromagnetic
4-6: Testing and
Electrical
SANS 61000-4- materials and measurement CS: max 150 kHz ~ 230 BS N
6:2009 techniques - Immunity MHz 10 V
Electromagnetic
4-6: Testing and
Electrical
SANS 61000-4- materials and measurement CS: max 150 kHz ~ 230 SF-1 N
Electromagnetic
4-6: Testing and
Electrical
SANS 61000-4- materials and measurement CS: max 150 kHz ~ 230 SF-3 N
Electromagnetic
SANS 61000-4- materials and measurement MF: max 30 A/m SF-1 N
immunity test
396/433
No. KT393

ESD: ±8 kV
compatibility (EMC) Part 3 V/m
Electrical
SANS 61000-6- materials and 6-1:Generic standards- EFT: ±1 kV BS N
1:2005 Immunity for residential, Surge: ±2 kV
components commercial and light- CS: 150 kHz ~ 80 MHz
industrial environments 3V
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic
SANS 61000-6- materials and 6-1:Generic standards- Surge:
for residential, CS: 150±2 kV SF-1 N
1:2005 components Immunity kHz ~ 80 MHz
commercial and light- 3 V
MF: 3 A/m
ESD: ±8 kV
Electrical
SANS 61000-6- materials and 6-1:Generic standards- EFT: ±1 kV SF-3 N
1:2005 Immunity for residential, Surge: ±2 kV
components commercial and light- CS: 150 kHz ~ 80 MHz
industrial environments 3V
V-DIP: max 100 %
ESD: ±8 kV
Electromagnetic
Electrical
SANS 61000-6- EFT: ±1 kV
materials and 6-2:Generic standards - Surge: BS N
2:2005 components Immunity for industrial CS: 150±2 kV
kHz ~ 80 MHz
environments 10 V
V-DIP: max 100 %
ESD: ±8 kV
Electrical compatibility (EMC) Part EFT: ±1 kV
SANS 61000-6- materials and 6-2:Generic standards - Surge: ±2 kV SF-1 N
environments 10 V
V-DIP: max 100 %
MF: 3 A/m
ESD: ±8 kV
Electromagnetic
Electrical
SANS 61000-6- EFT: ±1 kV
materials and 6-2:Generic standards - Surge: SF-3 N
2:2005 components Immunity for industrial CS: 150±2 kV
kHz ~ 80 MHz
environments 10 V
V-DIP: max 100 %
397/433
No. KT393

Electromagnetic
Electrical 6-3:Generic standards -
SANS 61000-6- materials and Emission standard for BS N
3:2011 components residential, commercial CE: 150 kHz ~ 30 MHz
environments
Electromagnetic
Electrical 6-3:Generic standards - RE: 30 MHz ~ 6 GHz
SANS 61000-6- materials and Emission standard for SF-3 N
environments
Electromagnetic
environments
Electromagnetic
environments
Electromagnetic
Electrical compatibility (EMC) Part
SANS 61000-6- materials and 6-4: Generic standards - RE: 30 MHz ~ 6 GHz SF-2 N
4:2011 CE: 150 kHz ~ 30 MHz
components Emission standard for
Electromagnetic
4:2011 CE: 150 kHz ~ 30 MHz
Electromagnetic
SANS 61000-6- materials and 6-4: Generic standards - CE: 150 kHz ~ 30 MHz BS N
4:2011 components Emission standard for
Electromagnetic
4:2011 CE: 150 kHz ~ 30 MHz
398/433
No. KT393

RE: 30 MHz ~ 1 GHz
RS: 80 MHz ~ 2.7 GHz,
Electrical measurement, control
SANS 61326- 10 V/m
materials and and laboratory use - SF-3 N
1:2007(Ed. 1.00) components EMC requirements - Part EFT: ±2 kV
1 : General requirement CS: 150±2
Surge: kV
kHz ~ 80 MHz,
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 1 GHz

ESD: ±8 kV
Electrical equipment for RS: 80 MHz ~ 2.7 GHz,
Electrical measurement, control 10 V/m
SANS 61326- materials and and laboratory use - EFT: ±2 kV SF-1 N
1:2007(Ed. 1.00) components EMC requirements - Part Surge: ±2 kV
1 : General requirement CS: 150 kHz ~ 80 MHz,
10 V
V-DIP: max 100 %
M/F: 30 A/m

Electrical measurement, control
SANS 61326- RE: 30 MHz ~ 1 GHz
materials and and laboratory use - SF-2 N
1:2007(Ed. 1.00) components EMC requirements - Part CE: 150 kHz ~ 30 MHz
1 : General requirement

ESD: ±8 kV
Electrical equipment for RS: 80 MHz ~ 2.7 GHz,
SANS 61326- materials and and laboratory use - EFT: ±2 kV BS N
1:2007(Ed. 1.00) components EMC requirements - Part Surge: ±2 kV
1 : General requirement CS: 150 kHz ~ 80 MHz,
10 V
V-DIP: max 100 %

ESD: ±8 kV
Electrical equipment for RS: 80 MHz ~ 1 GHz
Electrical 10 V/m
SANS 61326:2003 materials and measurement, control EFT: ±1 kV BS N
components and laboratory use - Surge: ±2 kV
EMC requirements CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %

Electrical measurement, control RE: 30 MHz ~ 1 GHz
and laboratory use - CE: 150 kHz ~ 30 MHz
components EMC requirements
399/433
No. KT393

RE: 30 MHz ~ 1 GHz
ESD: ±8 kV
Electrical 10 V/m
SANS 61326:2003 materials and measurement, control EFT: ±1 kV SF-1 N
components and laboratory use - Surge: ±2 kV
EMC requirements CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
MF: 30 A/m
RE: 30 MHz ~ 1 GHz

ESD: ±8 kV
SANS 61326:2003 materials and and laboratory use - SF-3 N
EFT: ±1 kV
components EMC requirements Surge: ±2 kV
10 V
V-DIP: max 100 %
ESD: ±8 kV
SANS 61547:2012 materials and lighting purposes - EMC EFT: ±1 kV BS N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %
ESD: ±8 kV
V/m
SANS 61547:2012 materials and lighting purposes - EMC Surge: ±2 kV SF-1 N
3V
V-DIP: max 100 %
MF: 1 A/m
ESD: ±8 kV
SANS 61547:2012 materials and lighting purposes - EMC EFT: ±1 kV SF-3 N
Surge: kV
kHz ~ 80 MHz
3V
V-DIP: max 100 %

ESD: ±8 kV
SANS 61800- materials and systems Part 3 : EMC EFT: ±2 kV BS N
3:2013 components requirements and Surge: ±2 kV
3V
V-DIP: max 100 %
400/433
No. KT393

Adjustable speed
Electrical electrical power drive
SANS 61800- CE: 150 kHz ~ 30 MHz
materials and systems Part 3 : EMC SF-2 N
3:2013 RE: 30 MHz ~ 6 GHz
components requirements and
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
SANS 61800- 10 V/m
3:2013 EFT: ±2 kV
3V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
SANS 61800- 10 V/m
3:2013 EFT: ±2 kV
3V
V-DIP: max 100 %

ESD: ±8 kV
Electrical systems (UPS) Part 2 : 10 V/m
SANS 62040- materials and Electromagnetic EFT: ±2 kV BS N
2:2007 components compatibility (EMC) Surge: ±2 kV
10 V
V-DIP: max 100 %
Electrical systems (UPS) Part 2 :
SANS 62040- CE: 150 kHz ~ 30 MHz
2:2007 RE: 30 MHz ~ 1 GHz
requirements
RE: 30 MHz ~ 1 GHz

ESD: ±8 kV
SANS 62040- 10 V/m
2:2007 EFT: ±2 kV
10 V
V-DIP: max 100 %
401/433
No. KT393

RE: 30 MHz ~ 1 GHz
ESD: ±8 kV
SANS 62040- 10 V/m
2:2007 EFT: ±2 kV
10 V
V-DIP: max 100 %
RE : 100 kHz ∼ 2.5

GHz
100 kHz ∼ 108 MHz
SSANGYONG Motor CE(Current Method) :
Electrical Company - component 100 kHz ∼ 108 MHz
SES E 922:2018 materials and test methods of SF-2 N
MFE : 20 Hz ∼ 200
components electromagnetic kHz
compatibility RE(Magnetic Loop) :
150 kHz ∼ 30 MHz
RI(ALSE) : 80 MHz ∼ 2
GHz, 80 V/m
RE : 100 kHz ∼ 2.5

GHz
100 kHz ∼ 108 MHz
100 kHz ∼ 108 MHz
MFE : 20 Hz ∼ 200
kHz
RE(Magnetic Loop) :
SSANGYONG Motor 150 kHz ∼ 30 MHz
Electrical Company - component RI(ALSE) : 80 MHz ∼ 2
SES E 922:2018 materials and test methods of BS N
GHz, 80 V/m
components electromagnetic BCI : (1 ∼ 400) MHz,
compatibility 100 mA
MFI : (DC(0) ∼ 150)
kHz, 900 A/m
VTE : -100 V, +75 V
∼ +100) V
CTI(Signal Line) : (-60
∼ 40) V
ESD : Max ±25 kV
402/433
No. KT393

RE : 100 kHz ∼ 2.5
GHz
100 kHz ∼ 108 MHz
100 kHz ∼ 108 MHz
MFE : 20 Hz ∼ 200
kHz
RE(Magnetic Loop) :
150 kHz ∼ 30 MHz
SSANGYONG Motor ∼ +100) V
Electrical Company - component CTI(Signal Line) : (-60
SES E 922:2018 materials and test methods of SF-1 N
∼ 40) V
components electromagnetic CE(AC/DC Power) :
compatibility 150 kHz ∼ 30 MHz
CE(TEL) : 150 kHz ∼
30 MHz
Harmonic Current
Emission : up to 16 A
Voltage Fluctuation
and Flicker : up to 16 A
Electrical Fast
Transients/Burst : ±2 kV
Surge Transient : Max
±2 kV
CE : 150 kHz ∼ 30
MHz
ESD: ±8 kV
General Performance RS: 80 MHz ~ 2 GHz
Electrical requirements of
materials and PCS(Power Conditioning 10 V/m
SGSF-04-2012-07 BS N
EFT: ±2 kV
components System) for energy Surge: ±2 kV
storage systems CS: 150 kHz ~ 80 MHz
10 V
V-DIP: max 100 %
General Performance
Electrical requirements of CE : 150 kHz ∼ 30
SGSF-04-2012-07 materials and PCS(Power Conditioning MHz SF-2 N
components System) for energy RE: 30 MHz ∼ 1 GHz
storage systems

CE : 150 kHz ∼ 30
MHz
General Performance ESD: ±8 kV
Electrical requirements of RS: 80 MHz ~ 2 GHz
SGSF-04-2012-07 materials and PCS(Power Conditioning 10 V/m SF-1 N
components System) for energy EFT: ±2 kV
storage systems Surge: ±2 kV
10 V
V-DIP: max 100 %
403/433
No. KT393

CE : 150 kHz ∼ 30
MHz
General Performance ESD: ±8 kV
Electrical requirements of RS: 80 MHz ~ 2 GHz
SGSF-04-2012-07 materials and PCS(Power Conditioning 10 V/m SF-3 N
components System) for energy EFT: ±2 kV
storage systems Surge: ±2 kV
10 V
V-DIP: max 100 %
CE : 150 kHz ∼ 30
Electric Energy Storage MHz
System - ESD: ±8 kV
Part 1: General RS: 80 MHz ~ 2 GHz
Electrical
SPS-SGSF-04- materials and Requirements 10 V/m BS N
2013-02:2013 components and Test Method of EFT: ±2 kV
Electric Energy Storage Surge: ±2 kV
System for Single Phase CS: 150 kHz ~ 80 MHz
Low Voltage 10 V
V-DIP: max 100 %
Electric Energy Storage

System -
Part 1: General
SPS-SGSF-04- materials and Requirements MHz SF-2 N
2013-02:2013 components and Test Method of
Electric Energy Storage RE: 30 MHz ∼ 1 GHz
System for Single Phase
Low Voltage

Electric Energy Storage CE : 150 kHz ∼ 30
MHz
Part 1: General
Electrical RS: 80 MHz ~ 2 GHz
SPS-SGSF-04- materials and Requirements 10 V/m SF-1 N
Electric Energy Storage EFT: ±2 kV
System for Single Phase CS: 150±2
Surge: kV
kHz ~ 80 MHz
Low Voltage 10 V
V-DIP: max 100 %

Electric Energy Storage CE : 150 kHz ∼ 30
MHz
Part 1: General
Electric Energy Storage EFT: ±2 kV
System for Single Phase CS: 150±2
Surge: kV
kHz ~ 80 MHz
Low Voltage 10 V
V-DIP: max 100 %
404/433
No. KT393

CE : 150 kHz ∼ 30
Electrical
SPS-SGSF-04- materials and Requirements 10 V/m BS N
2013-03 :2013 components and Test Method of EFT: ±2 kV
System for Three Phase CS: 150 kHz ~ 80 MHz
Low Voltage 10 V
V-DIP: max 100 %

System -
Part 2: General
SPS-SGSF-04- materials and Requirements MHz SF-2 N
2013-03 :2013 components and Test Method of RE: 30 MHz ∼ 1 GHz
System for Three Phase
Low Voltage

CE : 150 kHz ∼ 30
Part 2: General
Low Voltage 10 V
V-DIP: max 100 %

CE : 150 kHz ∼ 30
Part 2: General
Low Voltage 10 V
V-DIP: max 100 %
CE : 150 kHz ∼ 30
Electrical Energy Storage MHz
Systems - ESD: ±8 kV
Electrical
SPS-SGSF-045-1- materials and Requirements and Test 10 V/m BS N
3:2014 Method of Electrical EFT: ±2 kV
components Energy Storage System Surge: ±2 kV
for Demand side CS: 150 kHz ~ 80 MHz
Management 10 V
V-DIP: max 100 %
405/433
No. KT393

Electrical Energy Storage
Systems -
Part 3: General
Electrical and Test CE : 150 kHz ∼ 30
SPS-SGSF-045-1- materials and Requirements MHz SF-2 N
3:2014 Method of Electrical
components Energy Storage System RE: 30 MHz ∼ 1 GHz
for Demand side
Management

Electrical Energy Storage CE : 150 kHz ∼ 30
MHz
Part 3: General
Electrical and Test RS: 80 MHz ~ 2 GHz
SPS-SGSF-045-1- materials and Requirements 10 V/m SF-1 N
3:2014 components Method of Electrical
Energy Storage System EFT: ±2 kV
Surge: ±2 kV
Management 10 V
V-DIP: max 100 %

Electrical Energy Storage CE : 150 kHz ∼ 30
MHz
Part 3: General
Electrical and Test RS: 80 MHz ~ 2 GHz
SPS-SGSF-045-1- materials and Requirements 10 V/m SF-3 N
3:2014 components Method of Electrical
Energy Storage System EFT: ±2 kV
Surge: ±2 kV
Management 10 V
V-DIP: max 100 %
Antenna : 200 MHz ∼

6 GHz, 140 V/m
Mobile radio
communications test :
(380 ∼ 5 930) MHz, Antenna : 200 MHz ∼
11 W 6 GHz, 140 V/m
AN test : 100 kHz ∼ Mobile radio
108 MHz communications test :
RE test : 100 kHz ∼ 6 (380 ∼ 5 930) MHz,
GHz 11 W
CP test : 9 kHz ∼ 108 AN test : 100 kHz ∼
Electrical
materials and MHz 108 MHz
TL 81000:2018 SF-2 N
components Magnetic field coil RE test : 100 kHz ∼ 6
12 cm : 20 Hz ~ 150 GHz
kHz CP test : 9 kHz ∼ 108
Magnetic field coil MHz
60 cm : 9 kHz ~ 30 Magnetic field coil 12
MHz cm : 20 Hz ∼ 150 kHz
Pulse Magnetic field coil 60
interference on supply cm : 9 kHz ∼ 30 MHz
lines : (-450 ~ +150)
V, -150 V, +100 V
interference on sensor
cable: ±120 V
406/433
No. KT393

VOLKSWAGEN - AN test : 100 kHz ∼

Electromagnetic 108 MHz
Compatibility of RE test : 100 kHz ∼ 6
Electronic GHz
Components for Motor CP test : 9 kHz ∼ 108
Vehicles MHz
Electrical
materials and [exception] Magnetic field coil 12
TL 81000:2018 SF-1 N
components 5.2.4 Stripline cm : 20 Hz ∼ 150 kHz
5.3.7 Stripline (SL test, Magnetic field coil 60
optional) cm : 9 kHz ∼ 30 MHz
5.3.11 Isotropic Pulse interference on
magnetic supply lines : (-450 ~
field coil 100 cm² +150) V
6. Vehicle level interference on sensor
cables : ±120 V
ESD : Max ±15 kV

BCI : 100 Hz ∼ 400
MHz, 106 dBμA
Magnetic field test :
VOLKSWAGEN - (DC(0) ∼ 150) kHz, 4
Electromagnetic 000 A/m
Compatibility of AN test : 100 kHz ∼
Electronic 108 MHz
Components for Motor RE test : 100 kHz ∼ 6
Vehicles GHz
Electrical
materials and [exception] CP test : 9 kHz ∼ 108
TL 81000:2018 BS N
components 5.2.4 Stripline MHz
5.3.7 Stripline (SL test, Magnetic field coil 12
optional) cm : 20 Hz ∼ 150 kHz
5.3.11 Isotropic Magnetic field coil 60
magnetic cm : 9 kHz ∼ 30 MHz
field coil 100 cm² Pulse interference on
6. Vehicle level supply lines : (-450 ∼
+150) V, -150 V, +100
V
interference on sensor
cables : ±120 V
407/433
No. KT393

AN-TEST : 100 kHz ∼
174 MHz
CP TEST: 100 kHz ∼
174 MHz
RE-TEST, ALSE
METHOD : 100 kHz ∼
2 690 MHz
CTE TEST : -150 V,
+100 V
BCI : 100 kHz ∼ 400
TESLA MOTORS, Inc- MHz, 106 dBμA
Electrical EMC Requirements for
TS-0000048- RI(ALSE) : (200 ∼ 3
materials and Electrical and BS N
06:2018 200) MHz, 150 V/m
components Electronic Components TSUP : (-150 ∼ +100)
Including Motors V
TOL(CCC) : (-75 ∼ 60)
V
TOL(ICC) : ±6 V
ESDH TEST : Max ±15
kV
ESDI TEST : Max ±25
kV
ESDD TEST : MAx ±25
kV

174 MHz
174 MHz
TESLA MOTORS, Inc- RE-TEST, ALSE
Electrical EMC Requirements for
TS-0000048- METHOD : 100 kHz ∼
materials and Electrical and SF-1 N
06:2018 2 690 MHz
components Electronic Components TSUP : (-150 ∼ +100)
Including Motors V
TOL(CCC) : (-75 ∼ 60)
V
TOL(ICC) : ±6 V

174 MHz
TESLA MOTORS, Inc- 174 MHz
Electrical EMC Requirements for RE-TEST, ALSE
TS-0000048- materials and Electrical and METHOD : 100 kHz ∼ SF-2 N
06:2018 components Electronic Components 2 690 MHz
Including Motors CTE TEST : -150 V,
+100 V
RI(ALSE) : (200 ∼ 3
200) MHz, 150 V/m
Electrical
VCCI- RE: 30 MHz ~ 6 GHz
materials and Technical requirement SF-1 N
CISPR32:2016 CE: 150 kHz ~ 30 MHz
components
Electrical
CISPR32:2016 CE: 150 kHz ~ 30 MHz
components
408/433
No. KT393

Electrical
CISPR32:2016 CE: 150 kHz ~ 30 MHz
components
Electrical
VCCI- materials and Technical requirement BS N
CISPR32:2016 CE: 150 kHz ~ 30 MHz
components
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
Electrical Regulation on
MFDS Notice 10 V/m
materials and Electromagnetic Safety SF-3 N
No.2020-12 EFT: ±2 kV
components of Medicinal Products Surge: ±2 kV
10 V
V-DIP: max 100 %
RE: 30 MHz ~ 6 GHz

ESD: ±8 kV
Electrical Regulation on 10 V/m
MFDS Notice materials and Electromagnetic Safety EFT: ±2 kV SF-1 N
No.2020-12 components of Medicinal Products Surge: ±2 kV
10 V
V-DIP: max 100 %
M/F: 3 A/m
Electrical Regulation on
MFDS Notice RE: 30 MHz ~ 6 GHz
materials and Electromagnetic Safety SF-2 N
No.2020-12 CE: 150 kHz ~ 30 MHz
components of Medicinal Products

ESD: ±8 kV
Electrical Regulation on 10 V/m
MFDS Notice materials and Electromagnetic Safety EFT: ±2 kV BS N
No.2020-12 components of Medicinal Products Surge: ±2 kV
10 V
V-DIP: max 100 %
409/433
No. KT393

03.012 Software

Safety – Part 1: General C language,
IEC 60335-1:2020 Software requirements SF-1 N
C++ language
Annex R Software
evaluation
Table R.6
Functional safety of
electrical/electronic/pro
grammable electronic
safety-related systems – C language,
IEC 61508-3:2010 Software SF-1 N
C++ language
Part 3: Software
requirements
Table B.1

Safety – Part 1: General C language,
KC 60335-1:2022 Software requirements SF-1 N
C++ language
Annex R Software
evaluation
Table R.6
Guidelines for the use of

MISRA C++:2008 Software the C++ language in C++ language SF-1 N
critical systems
Guidelines for the use of

MISRA C:2012 Software the C language in critical C language SF-1 N
systems
410/433
No. KT393

03.013 Energy Efficiency

External a.c. - d.c. and
a.c. - power Supply voltage(AC):
EN Electrical supplies - Determination Max. 250 V
50563:2011+A1:2 materials and of no-load SF-1 N
Supply frequency: Max.
013 components power and average 60 Hz
efficiency of active
modes

household and office Supply voltage(AC):
Electrical
materials and equipment – Max. 250 V
EN 50564:2011 SF-1 N
Measurement of low Supply frequency: Max.
components power consumption (IEC 60 Hz
62301:2011 (MOD))
ENERGY STAR Program Supply voltage(AC):

Electrical Requirements Product
ENERGY STAR Max. 250 V
materials and Specification for SF-1 N
Program Supply frequency: Max.
components Audio/Video Eligibility 60 Hz
Criteria Version 3.0

materials and Specification for SF-1 N
components Computers Eligibility 60 Hz

materials and Specification for Displays SF-1 N
components Eligibility Criteria Version 60 Hz
7.1
ENERGY STAR Program

Requirements Product Supply voltage(AC):
Electrical
ENERGY STAR materials and Specification for Max. 250 V SF-1 N
Program Imaging Equipment Supply frequency: Max.
components Eligibility Criteria Version 60 Hz
2.0

ENERGY STAR Max. 250
materials and Specifications for SF-1 N
components Televisions Eligibility 60 Hz
ENERGY STAR Program

Requirements, Product Supply voltage(AC):
Electrical
ENERGY STAR materials and Specification for Max. 480 SF-2 N
Program Automatic Commercial Supply frequency: Max.
components Ice Makers, Eligibility 60 Hz
411/433
No. KT393

ENERGY STAR Program
Electrical Specification for
materials and Commercial SF-2 N
components Refrigerators and 60 Hz
Freezers, Eligibility
ENERGY STAR Program

Electrical
ENERGY STAR materials and Specification for Max. 480 V SF-2 N
Program Residential Refrigerators Supply frequency: Max.
components and Freezers, Eligibility 60 Hz
Methods of Supply voltage(AC):

Electrical measurement for the Max. 250 V
IEC 62087:2011 materials and power consumption of SF-1 N
components audio, video and related 60 Hz
equipment
Household electrical Supply voltage(AC):

Electrical appliances – Max. 250 V
Measurement of Supply frequency: Max.
components standby power 60 Hz
Household
referigerating appliances
– Characteristics and test
methods
Clause 4. Classification
Clause 7. Determination Supply voltage(AC):
Electrical of linear dimensions, Max. 480 V
IEC 62552:2007 materials and volumes and areas SF-2 N
components Clause 8. General test 60 Hz
conditions
Clause 13. Testing
storage temperatures
Clause 15. Energy
consumption test
Clause 17. Freezing test
Air cleaners
12.15 ozone emission
concentration test Supply voltage: Max.
12.18 noise test 300 V
Electrical
materials and 12.19 fine dust removal Supply frequency: Max.
KS C 9314:2019 SF-3 N
capacity test 60 Hz
components 12.20 Caculation of Standard use area: 200
standard usage area m² or less
12.22 noxious gas
removal rate test
412/433
No. KT393

Indoor Air Cleaner
Cl. 10.4 : Cleaning
ability test
Cl. 10.7 : Hazardous gas Supply voltage(AC):
Electrical
SPS-KACA 002- materials and purification ability test Max. 300 V SF-3 N
0132:2021 components removal efficiency gas
Cl. 10.9 : Harmful Supply frequency: Max.
test 60 Hz
Cl. 10.10 : Ozone
concentration test
Cl. 10.11 : Noise test
Regulation for e-
Standby Program
Article 3
Article 3, 1. Computers
Article 3, 2. Monitor
Article 3, 3 Printers 500 W or less
Article 3, 4. Facsimile 153 cm or less
Article 3, 5. Copying 3000 W or less
machines 3000 W or less
Article 3, 6. Scanner 5000 W or less
Article 3, 7. Multi- 1000 W or less
composite 5000 W or less
Article 3, 10. Audio 1000 W or less
MOTIE Notice Electrical Article 3, 11. DVD player 150W or less
No.2022- materials and Article 3, 12. Radio SF-1 N
1000 W or less
33(02.15.2022) components Cassettes 4000 W or less
Article 3, 13. Microwave 100W or less
oven 150W or less
Article 3, 15. Door 2000W or less
phone 3000 W or less
Article 3, 16. Wired and 3000 W or less
wireless telephone 100 W or less
Article 3, 17. Bidet 9 ports or less
Article 3, 20. Hand dryer
Article 3, 21. Server
Article 3, 22. Digital
Converter
Article 3, 23. Wire and
wireless router
413/433
No. KT393

Regulation for Efficient
Management Products
Article 4, 1. Electric
refrigerator
Article 4, 3. Kimchi
Refrigerator
Article 4, 9. Electric cold 1000 L or less
and hot water 1000 L or less
dispensers 3000 W or less
Article 4, 10. Electric rice
MOTIE Notice Electrical 20 Quotes or Less
No.2022- materials and cooker 20 cm ~ 41 cm SF-2 N
components Article 4, 12. Electric
64(04.27.2022) 300 L ~ 2 000 L
Fan 500 W ~ 10 kW
Article 4, 22. 1000 W or less
Commercial electric 1 kW ~ 10 kW
refrigerators
stove
Article 4, 30.
Dehumidifiers
range

MOTIE Notice Electrical Management Products 20 cm ~ 41 cm
No.2022- materials and Article 4, 12. Electric SF-3 N
200 m² or less
64(04.27.2022) components Fan
Article 4, 13. Air Cleaner

Management Products
Article 4, 9. Electric cold
and hot water
dispensers
Article 4, 10. Electric rice
cooker 3000 W or less
Article 4, 12. Electric 20 Quotes or Less
Fan 20 cm ~ 41 cm
Article 4, 20. Adapter 150W or less
MOTIE Notice Electrical and Battery Chargers 47 cm ~ 216 cm
No.2022- materials and Article 4, 26. TV monitor 500 W ~ 10 Kw SF-1 N
64(04.27.2022) components Article 4, 28. Electric 1000 W or less
stove 1 kW ~ 10 kW
Article 4, 30. 150 W or less
Dehumidifiers 30.48 cm ~ 154.94 cm
Article 4, 36. Electric 153 cm or less
range
Article 4, 37. Set top
box
Article 4, 42. Signage
Display
Article 4, 44. Monitor
414/433
No. KT393

03.014 Environmental and Reliability

Environmental test
specification for
electrical, electronic and
programmable MaxAC440V
equipment and systems (50~400)Hz
MaxDC75V
Section 3 MaxAC528V
4. Electrical power (45~440)Hz
supply failure test MaxDC98V
Electrical
DNVGL-CG- 5. Power supply AC(500~2500)V
materials and variation tests SF-3 N
0339:2021 (50~60)Hz
components 6. Vibration tests DC(25~500)V
7. Dry heat test (0~10)GΩ
8. Damp heat test (-25∼70)°C
9. Cold test (45~98)%R.H.
10. Salt mist test (2~100)Hz
11. Inclination test (1~40)m/s²
12. Insulation resistance (0~22.5)°
test 5%Nacl
13. High voltage test
Rolling stock -
Electronic equipment
13.4.4 Low temperature (-40 ∼ 85) °C
test (25 ∼ 55) °C
Electrical 13.4.5 Dry heat test (45 ∼ 95) % R.H.
EN 50155:2021 materials and 13.4.6 Low temperature 35 °C, NaCl 5 % SF-3 N
components storage test (2 ∼ 250) Hz
13.4.8 Cyclic damp heat (0.37 ∼ 300) m/s²
test (30 ∼ 1 000) m/s²
13.4.10 Vibration and
shock test
13.4.13 Salt mist test
415/433
No. KT393

radiocommunication
equipment and systems.
General requirements.
Methods of testing and
7.1 Extreme power
supply (55 ∼ 70) °C
8.1 General 40 °C, 93 % R.H.
8.2 Dry heat (-30 ∼ -15) °C
Electrical 8.3 Damp heat (25 ∼ 2 020) mm
EN 60945:2002 materials and 8.4 Low temperature SF-3 N
(2 ∼ 100) Hz
components 8.6.1 Drop on hard NaCl 5 %
surface 40 °C, (90 ∼ 95) %
8.7 Vibration R.H.
8.8 Rain and
Spray(exposed
equipment)
8.9 Immersion
8.9.3 Portable
equipment(temporary
immersion)
8.12 Corrosion
Electrical Rolling stock equipment (2 ∼ 250) Hz
EN 61373:2010 materials and (0.37 ∼ 300) m/s² SF-3 N
- Shock and vibration
components (30 ∼ 1 000) m/s²
tests
General Specification for

Electrical/Electronic
Components -
Environmental/Durabilit
y
9.3 Mechanical
9.3.1 Vibration with
Thermal Cycling
9.3.2 Mechanical
Shock - Pothole
9.3.3 Mechanical (10 ∼ 2 000) Hz
Shock - Collision (-55 ∼ 155) °C
9.3.4 Mechanical
Electrical (117 ∼ 980) m/s²
Shock - Closure Slam
GMW 3172:2012 materials and 9.4 Climatic (-65 ∼ 175) °C SF-3 N
components 9.4.1 High (-10 ∼ 65) °C,
(0 ∼ 95) % R.H.
Temperature (5 ∼ 95) % R.H.
Degradation
9.4.2 Thermal Shock
Air-To-Air (TS)
9.4.3 Power
Temperature Cycle (PTC)
9.4.5 Humid Heat
Cyclic (HHC)
9.4.6 Humid Heat
Constant (HHCO)
9.4.7 Salt Mist
9.4.8 Salt Spray
416/433
No. KT393

Max AC 440 V
Max DC 50 V
E10 Test Specification Max AC 528 V
for Type Approval Max DC 65 V
(25 ∼ 70) °C
NO.3 External power (25 ∼ 55) °C
supply failure (80 ~ 95) % R.H.
NO.4 Power supply (5 ~ 100) Hz
variations
Electrical (1 ~ 40) m/s²
IACS Req. materials and NO.5 Dry heat (0 ~ 22.5)° SF-3 N
1991/Rev.8 2021 components NO.6 Damp heat DC (24 ~ 500) V
NO.7 Vibration (0 ~ 99.9) GΩ
NO.8 Inclination AC (500 ~ 2 500) V
NO.9 Insulation (-25 ~ 25) °C
resistance (15 ~ 35) °C
NO.10 High voltage 5% Nacl
NO.11 Cold 40 °C , 93 % R.H.
NO.12 Salt mist 23 °C , (45 ~ 55) %
R.H.
Basic environmental
Electrical
IEC 60068-2- testing procedures - Part 35 °C, NaCl 5 %
11:2021 2-11 : Tests - Test Ka :
components Salt mist
Basic environmental
Electrical
IEC 60068-2- testing procedure - Part (101 ∼ 1) kPa
13:2021 2-13 : Tests - Test M :
components Low air pressure
Environmental testing-
Part 2-14 : Tests-Test N :
Change of temperature
7. Test Na : Rapid
Electrical
IEC 60068-2- materials and change of temperature (-65 ∼ 175) °C SF-3 N
14:2009 with prescribed time of
components transfer
8. Test Nb : Change of
temperature with
specified rate of change
Electrical Environmental testing-

IEC 60068-2- materials and Part 2-1 : Tests-Test A : (-65 ∼ 5) °C SF-3 N
1:2007 components Cold

IEC 60068-2- materials and Parts 2-27 : Tests-Test (50 ∼ 10 000) m/s² SF-3 N
27:2008 components Ea and guidance : Shock

IEC 60068-2- materials and Part 2-2 : Tests-Test B : (30 ∼ 175) °C SF-3 N
2:2007 components Dry heat
Electrical
IEC 60068-2- Part 2-30 : Tests-Test Db (25 ∼ 55) °C
30:2005 : Damp heat, cyclic(12 h (45 ∼ 95) % R.H.
components + 12 h cycle)
417/433
No. KT393

Environmental testing -
Part 2-31: Tests - Test
Electrical
IEC 60068-2- materials and Ec: Rough handling (25 ∼ 1 500) mm SF-3 N
31:2008 shocks, primarily for
components equipment-type
specimens
Electrical Part 2-38 : Tests-Test
IEC 60068-2- (-10 ∼ 65) °C
materials and Z/AD : Composite SF-3 N
38:2021 (5 ∼ 95) % R.H.
components temperature/humidity
cyclic test
Part 2-52 : Tests - Test (15 ∼ 35) °C
Kb : Salt mist,
Electrical NaCl 5 %
IEC 60068-2- materials and cyclic(sodium chloride 40 °C, 93 % R.H. SF-3 N
52:2017 solution)
components (Exceptions) 23 °C, (45 ∼ 55) %
R.H.
9.4.8 Test method 7
9.4.9 Test method 8
Electrical Parts 2-64 : Tests-Test
IEC 60068-2- (1 ∼ 2 000) Hz
materials and Fh : Vibration, SF-3 N
64:2019 components broadband random and (0.98 ∼ 300) m/s²
guidance

IEC 60068-2- materials and Part 2-6 : Tests-Test Fc : (0.1 ∼ 2 000) Hz SF-3 N
6:2007 (0.98 ∼ 490) m/s²
components Vibration(sinusoidal)
Environmental testing- 30 °C, 93 % R.H.

Electrical
IEC 60068-2- Parts 2-78 : Tests-Test 30 °C, 85 % R.H.
78:2012 Cab : Damp heat, steady 40 °C, 93 % R.H.
components state 40 °C, 85 % R.H.
418/433
No. KT393

ships - Part 504 : -
Automation, control
and instrumentation
5. Environmental type
testing parameter
Table 1 - Type tests, test
procedures and Min. 1 ㏁
severities (-25 ∼ 5) °C
1. Visual inspection (55 ∼ 70) °C
2. Functional test to (25 ∼ 55) °C
Electrical equipment (45 ∼ 95) % R.H.
IEC 60092- materials and specification (15 ∼ 35) °C SF-3 N
504:2016 components 5. Insulation resistance NaCl 5 %
6. Cold with gradual 40 °C, 93 % R.H.
change of 23 °C, (45 ∼ 55) %
temperature R.H.
7. Dry heat with (2 ∼ 2 000) Hz
gradual change of
temperature
8. Damp heat,
cyclic(12h+12h cycle)
9. Salt mist
10.
Vibration(sinusoidal)
IPX1, IPX2, IPX3, IPX4,

Electrical Degrees of protection IPX5, IPX6, IPX7, IPX8,
IEC 60529:2013 materials and provided by SF-3 N
IP1X, IP2X, IP3X, IP4X,
components enclosures(IP Code) IP5X, IP6X
used on rolling stock (-40 ~ 85) ℃
(25 ~ 55) ℃
12.2.4 Cold start test (45 ~ 95) % R.H.
12.2.5 Dry heat test (0.05 ~ 5.00) kV
Electrical 12.2.6 Damp heat test, (0.05 ~ 6.00) kV
IEC 60571:2012 materials and cyclic SF-3 N
1 MΩ ~ 10 GΩ
components 12.2.10 Insulation test 35 ℃, NaCl 5 %
12.2.11 salt mist test (2 ~ 250) Hz
12.2.12 Vibration, (0.37 ~ 300) m/s²
Shock and bump test -40 ℃
12.2.15 Low
temperature storage
test

radiocommunication
equipment and systems DC (0 ∼ 100) V
Electrical
materials and -Methods
General requirements - AC (0 ∼ 550) V/(40 ∼
IEC 60945:2002 SF-3 N
of testing and 400) Hz
components required test results
7.2 Excessive conditions
419/433
No. KT393

radiocommunication
equipment and systems
- General requirements -
7.1 Extreme power
supply
8.1 General (55 ∼ 70) °C
8.2 Dry heat 40 °C, 93 % R.H.
Electrical 8.3 Damp heat (-30 ∼ -15) °C
IEC 60945:2002 materials and 8.4 Low temperature (2 ∼ 100) Hz SF-3 N
components 8.6.1 Drop on hard NaCl 5 %
surface 40 °C, (90 ∼ 95) %
8.7 Vibration R.H.
8.8 Rain and
Spray(exposed
equipment)
8.9 Immersion
8.9.3 Portable
equipment(temporary
immersion)
8.12 Corrosion
Railway applications-
Electrical (2 ∼ 250) Hz
Rolling stock
IEC 61373:2010 materials and (0.37 ∼ 300) m/s² SF-3 N
equipment-Shock and
components (30 ∼ 1 000) m/s²
vibration tests
Degrees of protection
provided by enclosures
Electrical
materials and for electrical equipment Impact Energy : (0.14
IEC 62262:2002 SF-3 N
against external ∼ 20) J
components mechanical impacts (IK
code)
Road vehicles -
Environmental
Electrical
ISO 16750-3:2012 materials and conditions and testing (-40 ∼ 160) °C SF-3 N
components electronic equipment - (10 ∼ 2 000) Hz
for electrical and
Part 3: Mechanical loads
Road vehicles -
Environmental
conditions and testing
for electrical and
Electrical electronic equipment -
ISO 16750-4:2010 materials and Part 4: Climatic loads (-70 ∼ 180) °C SF-3 N
5.4 Ice water shock test
5.8 Corrosion test with
flow of mixed gas
5.3 Solar radiation
420/433
No. KT393

Rated
voltage/Frequency
Max AC 440 V
(50 ~ 400) Hz
Max DC 75 V
Guidance for Approval Voltage fluctuation

of Manufacturing Max AC 528 V
Process and Type (45 ~ 440) Hz
Approval, Etc. Max DC 98 V
CHAPTER 3 TYPE
APPROVAL, Section 23 Internal voltage
Automatic and Remote AC (500 ~ 2 500) V
Control Systems (50 ~ 60) Hz
3.Electrical power Insulation resistance

Electrical supply failure test DC (25 ~ 500) V
KR : 2021 materials and SF-3 N
4.Electrical power (0 ~ 10) GΩ
components supply variation test
6.Dry heat test Temperature
7.Damp heat test (-25 ∼ 70) °C
8.vibration test
9.Inclination test Humidity
10.Insulation resistance (45 ~ 98) % R.H.
test
11.High voltage test Oscillation frequency
12.Cold test (2 ~ 100) Hz
13.Salt mist test
Vibration acceleration
(1 ~ 40) m/s²
Angular measure
(0 ~ 22.5) °
Salinity
5 % Nacl
Basic environmental
Electrical
KS C IEC 60068-2- testing procedures - Part 35 °C, NaCl 5 %
11:2021 2-11 : Tests - Test Ka :
components Salt mist
Basic environmental
Electrical
KS C IEC 60068-2- testing procedure - Part (101 ~ 1) kPa
13:2021 2-13 : Tests - Test M :
components Low air pressure

KS C IEC 60068-2- materials and Part 2-14 : Tests-Test N : (-65 ∼ 175) °C SF-3 N
14:2009 components Change of temperature

KS C IEC 60068-2- materials and Part 2-1 : Tests-Test A : (-65 ∼ 5) °C SF-3 N
1:2007 components Cold
Electrical Environmental testing -

KS C IEC 60068-2- materials and Part 2-27: Tests - Test Ea (50 ∼ 10 000) m/s² SF-3 N
27:2008 components and guidance: Shock
421/433
No. KT393

KS C IEC 60068-2- materials and Part 2-2 : Tests-Test B : (30 ∼ 175) °C SF-3 N
2:2007 components Dry heat
Electrical
KS C IEC 60068-2- Part 2-30: Tests - Test (25 ∼ 55) °C
30:2005 Db: Damp heat, cyclic (45 ∼ 95) % R.H.
components (12 h + 12 h cycle)
Part 2-31 : Tests-Test Ec
Electrical
KS C IEC 60068-2- materials and :shocks,
Rough handling (25 ∼ 1 500) mm SF-3 N
31:2008 primarily for
components equipment-type
specimens
Electrical Part 2-38: Tests - Test temperature (-10 ∼
KS C IEC 60068-2- materials and Z/AD: Composite 65) °C SF-3 N
38:2021 components temperature/humidity humidity (15 ∼ 96) %
cyclic test R.H.
Part 2-52 : Tests-Test Kb (15 ∼ 35) °C
Electrical : Salt mist, cyclic(sodium NaCl 5 %
KS C IEC 60068-2- materials and chloride solution) 40 °C, 93 % R.H. SF-3 N
52:2017 components [Exceptions] 23 °C, (45 ∼ 55) %
9.4.8 Test Method 7 R.H.
9.4.9 Test Method 8
Part 2 : Tests-Guidance
to tests Z/AFc and Z/BFc (-55 ∼ 5) °C
Electrical
KS C IEC 60068-2- materials and :temperature(cold
Combined (30 ∼ 155) °C SF-3 N
53:2010 and (0.1 ∼ 2 000) Hz
components dry heat) and (0.98 ∼ 490) m/s²
vibration(sinusoidal)
tests
Environmental testing —
Electrical Part 2-57: Tests — Test
KS C IEC 60068-2- materials and Ff: Vibration — Time- (0.1 ∼ 2 000) Hz SF-3 N
57:2013 components history and sine-beat
method

KS C IEC 60068-2- materials and Part 2-6 : Tests-Test Fc : (0.1 ∼ 2 000) Hz SF-3 N
6:2015 (0.98 ∼ 490) m/s²
components Vibration(sinusoidal)
Environmental testing- 30 °C, 93 % R.H.

Electrical
KS C IEC 60068-2- Part 2-78 : Tests-Test 30 °C, 85 % R.H.
78:2012 Cab : Damp heat, steady 40 °C, 93 % R.H.
components state 40 °C, 85 % R.H.
422/433
No. KT393

Rated
voltage/Frequenc
y
Max AC 440 V
(50 ~ 400) Hz
Max DC 75 V
Voltage
fluctuation
Electrical installations in Max AC 528 V
ships - Part 504 : (45 ~ 440) Hz
Automation, control Max DC 98 V
and instrumentation Internal voltage
3. High pressure AC (500 ~ 2
4a. Power fluctuation 500) V
4b. Power failure (50 ~ 60) Hz
5. Insulation resistance Insulation
6. Cold with gradual resistance
change of temperature DC (24 ~ 500) V
Electrical
KS C IEC 60092- materials and 7. Dry heat with gradual (0 ~ 10) GΩ SF-3 N
504:2001 components 8. Dampofheat,
change temperature Temperature
(-25 ∼ 70) °C
cyclic(12h+12h cycle) Humidity
9. Salt mist (45 ~ 98) % R.H.
10. Vibration(sinusoidal) Oscillation
11a. Static gradie frequency
12. Outer Protection (2 ~ 100) Hz
Vibration
[Exception] acceleration
Protection IP1X, IP2X for (1 ~ 40) m/s²
external dust Angular measure
(0 ~ 22.5)°
Salinity
Nacl 5 %
IP code
Waterproof
(IPX1~ IPX8)
Dustproof (IP1X
~ IP6X)
(IP Code) IPX1, IPX2, IPX3, IPX4,
Electrical [Exception]
KS C IEC IPX5, IPX6, IPX7, IPX8,
materials and 14.2.9 Test for second SF-3 N
60529:2013 IP1X, IP2X, IP3X, IP4X,
components characteristic numeral 9 IP5X, IP6X
by high pressure and
temperature water
jetting
423/433
No. KT393

used on rolling stock (-40 ∼ 85) °C
(25 ∼ 55) °C
12.2.3 Cold start test (45 ∼ 95) %R.H.
12.2.4 Dry heat test (0.05 ~ 5.00) kV.a.c
Electrical 12.2.5 Damp heat test,
KS C IEC (0.05 ~ 6.00) kV.d.c
materials and cyclic SF-3 N
60571:2012 1 MΩ ~ 10 GΩ
components 12.2.9 Insulation test 35 °C, NaCl 5 %
12.2.10 salt mist test (2 ∼ 250) Hz
12.2.11 Vibration, (0.37 ∼ 300) m/s²
Shock and bump test (30 ∼ 1 000) m/s²
12.2.14 Low
temperature storage
test
Electrical (2 ∼ 250) Hz
KS C IEC 61373 —Rolling stock
materials and equipment —Shock and (0.37 ∼ 300) m/s² SF-3 N
:2010 components (30 ∼ 1 000) m/s²
vibration tests
Electrical
KS C IEC materials and for electrical equipment Impact Energy : (0.14 SF-3 N
62262:2002 against external ∼ 20) J
components mechanical impacts (IK
code)
Electrical Vibration testing

materials and methods for automobile (5 ∼ 2 000) Hz
KS R 1034:2006 SF-3 N
(4.9 ∼ 490) m/s²
components parts
Electrical Test methods for (1 ∼ 500) Hz

KS R 9144:2021 materials and vibration of parts of SF-3 N
(0.37 ∼ 1 000) m/s²
components railway rolling stock
Electrical
materials and Parts for railway signal - (10 ∼ 1 000) Hz
KS R 9186:2021 SF-3 N
components Vibration test methods (4.9 ∼ 1 970) m/s²

radiocommunication
equipment and systems DC (0 ∼ 100) V
Electrical
KS X IEC materials and -Methods
General requirements - AC (0 ∼ 550) V/(40 ∼ SF-3 N
60945:2002 of testing and 400) Hz
components required test results
7.2 Excessive conditions
424/433
No. KT393

radiocommunication
equipment and systems
- General requirements -
7.1 Extreme power (55 ∼ 70) °C
supply 40 °C, 93 % R.H.
8.1 General, 8.2 Dry (-30 ∼ -15) °C
Electrical heat
KS X IEC (25 ∼ 70) °C
materials and 8.3 Damp heat 8.4 Low SF-3 N
60945:2002 (2 ∼ 100) Hz
components temperature NaCl 5 %
8.6.1 Drop on hard 40 °C,
surface, 8.7 Vibration (90 ∼ 95) % R.H.
8.8 Rain and
Spray(exposed
equipment)
8.9.3 Portable
equipment(temporary
immersion), 8.12
Corrosion
Mechanical Vibrations
Electrical
MIL-STD-167- of Shipboard Equipment (4 ∼ 50) Hz
1:1974 (TYPE 1 -
components ENVIRONMENTAL)
Mechanical Vibrations
Electrical
MIL-STD-167-1A of Shipboard Equipment (4 ∼ 33) Hz
:2005 (TYPE 1 -
components ENVIRONMENTAL)
Test Method Standard

Electronic and Electrical
Component Parts
101E Salt
Atmosphere(Corrosion) 35 °C, NaCl 5 %
103B Humidity(Steady (15 ∼ 40) °C,
State) (25 ∼ 95) % R.H.
105C Barometric (4 572 ∼ 45 720) m
Pressure(Reduced) (-10 ∼ 70) °C,
Electrical 106G Moisture
MIL-STD- (25 ∼ 95) % R.H.
materials and Resistance SF-3 N
202G:2002 (-70 ∼ 150) °C
components 201A Vibration (10 ∼ 55) Hz
204D Vibration, High (5 ∼ 2 000) Hz
Frequency (0 ∼ 980) m/s²
212A Acceleration (294 ∼ 980) m/s²
[Exception] 3.2 Test (50 ∼ 2 000) Hz
condition B
213B Shock(Specified
Pulse)
214A Random
Vibration
425/433
No. KT393

Environmental Test
Methods
500.1 Low
Pressure(Altitude)
501.1 High Temperature
502.1 Low Temperature (98.2 ∼ 1.7) kPa
503.1 Temperature Max 180 °C
Shock Max -70 °C
506.1 Rain (-70 ∼ 200) °C
3.2 Procedure Ⅱ For 280 l/㎡/hr
simulation of steady- (50 ∼ 95) % R.H.
state rainfall (15 ∼ 40) °C,
507.1 Humidity (5 ∼ 15) %
509.1 Salt Fog (50 ∼ 95) % R.H.
512.1 Leakage Immersion
Electrical (Immersion) 1 000 mm
MIL-STD- materials and 3.1 Procedure Ι Max 234.1 min-¹ SF-3 N
810C:1975 components 513.2 Acceleration Max 587 m/s²
514.2 Vibration (5 ∼ 2 500) Hz
[Exception] (0.98 ∼ 491) m/s²
Category a, h, i, g (0.98 ∼ 736) m/s²
(Procedure ) 20 ms
516.2 Shock (1 ∼ 2 000) Hz
[Exception] (0.98 ∼ 491) m/s²
3.6 Procedure Ⅳ, High (1 ∼ 2 000) Hz
Intensity Test (0.98 ∼ 491) m/s²
3.7 Procedure Ⅴ, Bench (4 ∼ 33) Hz
handling Test (0.01 ∼ 0.1) inch
3.8 Procedure Ⅵ, Rail
impact Test
3.9 Related Shock Tests
519.2 Gunfire Vibration
Aircraft
426/433
No. KT393

Military Standard
Environmental Test
Methods and
Engineering Guidelines
500.3 Low Pressure
(Altitude)
501.3 High
Temperature
502.3 Low (98.2 ∼ 0.8) kPa
Temperature Max 180 °C
503.3 Temperature Max -70 °C
Shock (-70 ∼ 200) °C
506.3 Rain 280 l/㎡ /hr
Procedure Ⅱ-Drip (50 ∼ 96) % R.H.
507.3 Humidity (15 ∼ 40) °C,
509.3 Salt Fog (5 ∼ 15) %
513.4 Acceleration (50 ∼ 93) % R.H.
514.4 Vibration Max 234.1 min-¹
[Exception] Max 587 m/s²
Category 2. Large (5 ∼ 2 500) Hz
Electrical
MIL-STD- Assembly Transport (0.98 ∼ 491) m/s²
810E:1989 Category 3. Loose (0.98 ∼ 736) m/s²
components Cargo Transport 20 ms
516.4 Shock (1 ∼ 2 000) Hz
[Exception] (0.98 ∼ 491) m/s²
Procedure Ⅷ-Rail Solar Radiation
Impact (-20 ∼ 120) °C
Procedure Ⅸ-Catapult (800 ∼ 1 200) W/m²
launch / arrested Immersion
landing 1 000
519.4 Gunfire Temperature, Vibration
Vibration, Aircraft Ⅲ) ( -40 ∼ 125) °C
505.3 Solar Radiation (1 ∼ 2 000) Hz
(Sunshine) (0.98 ∼ 491) m/s²
Procedure Ⅱ Steady
state for prolonged
actinic effects
512.3 Leakage
(Immersion)
520.1 Temperature,
Humidity, Vibration,
Altitude
427/433
No. KT393

Department of Defense
for Environmental
Engineering
Considerations and
Laboratory Tests
500.4 Low Pressure
(Altitude)
501.4 High Temperature (98.2 ∼ 0.8) kPa
502.4 Low Temperature Max 180 °C
Shock (-70 ∼ 200) °C
506.4 Rain 280 l/㎡/hr
Procedure Ⅲ-Drip (50 ∼ 95) % R.H.
507.4 Humidity (15 ∼ 40) °C,
509.4 Salt Fog (5 ∼ 15) %
Category 5- (5 ∼ 2 500) Hz
Electrical Truck/Trailer/Tracked-
MIL-STD- (0.98 ∼ 491) m/s²
materials and Loose Cargo SF-3 N
810F:2000 (0.98 ∼ 736) m/s²
components Category 6- 20 ms
Truck/Trailer/Tracked- (1 ∼ 2 000) Hz
Large Assembly Cargo (0.98 ∼ 491) m/s²
516.5 Shock Solar Radiation
[Exception] (-20 ∼ 120) °C
Procedure Ⅶ-Rail Impact (800 ∼ 1 200) W/m²
Procedure Ⅷ-Catapult Immersion
Launch/Arrested 1 000 mm
Landing Temperature, Vibration
519.5 Gunfire ( -40 ∼ 125) °C
Vibration (1 ∼ 2 000) Hz
Procedure Ⅳ (0.98 ∼ 491) m/s²
505.4 Solar Radiation
(Sunshine)
State (actinic effects)
512.4 Immersion
ProcedureⅠImmersion
520.2 Temperature,
Humidity, Vibration
and Altitude
428/433
No. KT393

Environmental
Engineering
Considerations and
Laboratory Tests
500.4 Low Pressure
(Altitude)
501.4 High Temperature (98.2 ∼ 0.8) kPa
502.4 Low Temperature Max 180 °C
Shock (-70 ∼ 200) °C
506.4 Rain 280 l/㎡/hr
Procedure Ⅲ-Drip (50 ∼ 95) % R.H.
507.4 Humidity (15 ∼ 40) °C,
509.4 Salt Fog (5 ∼ 15) %
Category 5- (1 ∼ 2 500) Hz
Electrical
MIL-STD- materials and Truck/Trailer/Tracked- (0.98 ∼ 491) m/s² SF-3 N
810F:2003 components Loose Cargo (0.98 ∼ 736) m/s²
Category 6- 20 ms
Large Assembly Cargo (0.98 ∼ 491) m/s²
516.5 Shock Solar Radiation
[Exception] (-20 ∼ 120) °C
Procedure Ⅶ-Rail Impact (800 ∼ 1 200) W/m²
Procedure Ⅷ-Catapult Immersion
Launch/Arrested 1 000 mm
Landing Temperature, Vibration
519.5 Gunfire Vibration ( -40 ∼ 125) °C
Procedure Ⅳ (1 ∼ 2 000) Hz
505.4 Solar Radiation (0.98 ∼ 491) m/s²
(Sunshine)
512.4 Immersion
520.2 Temperature,
Humidity, Vibration and
Altitude
429/433
No. KT393

Environmental
Engineering
Considerations and
Laboratory Tests
500.5 Low Pressure
(Altitude)
Shock Max -70 °C
506.5 Rain (-70 ∼ 200) °C
Procedure Ⅲ-Drip 280 l/㎡/hr
507.5 Humidity (50 ∼ 95) % R.H.
509.5 Salt Fog (15 ∼ 40) °C,
513.6 Acceleration (5 ∼ 15) %
514.6 Vibration (50 ∼ 95) % R.H.
[Exception] Max 234.1 min-¹
Category 5- Max 587 m/s²
Loose Cargo (0.98 ∼ 491) m/s²
Category 6-
Electrical (0.98 ∼ 736) m/s²
MIL-STD- materials and Truck/Trailer/Tracked- 20 ms SF-3 N
810G:2008 components Large Assembly Cargo (1 ∼ 2 500) Hz
516.6 Shock (0.98 ∼ 491) m/s²
[Exception] (1 ∼ 2 000) Hz
Procedure Ⅶ-Pendulum (0.98 ∼ 491) m/s²
Impact (4 ∼ 33) Hz
Procedure Ⅷ-Catapult Solar Radiation
Launch/Arrested (-20 ∼ 120) °C
Landing (800 ∼ 1 200) W/m²
519.6 Gunfire Shock Immersion
Procedure Ⅲ 1 000 mm
528 Mechanical Temperature, Vibration
Vibrations of Shipboard ( -40 ∼ 125) °C
Equipment (1 ∼ 2 000) Hz
(Type 1 - Environmental (0.98 ∼ 491) m/s²
Vibration)
(Sunshine)
512.5 Immersion
520.3 Temperature,
Altitude
430/433
No. KT393

Environmental
Engineering
Considerations and
Laboratory Tests
500.6 Low Pressure
(Altitude)
Shock Max -70 °C
506.6 Rain (-70 ∼ 200) °C
Procedure Ⅲ-Drip 280 l/㎡/hr
507.6 Humidity (50 ∼ 95) % R.H.
509.6 Salt Fog (15 ∼ 40) °C,
513.7 Acceleration (5 ∼ 15) %
514.7 Vibration (50 ∼ 95) % R.H.
[Exception] Max 234.1 min-¹
Category 5- Max 587 m/s²
Loose Cargo (0.98 ∼ 491) m/s²
Category 6-
Electrical (0.98 ∼ 736) m/s²
MIL-STD- materials and Truck/Trailer/Tracked- 20 ms SF-3 N
810G:2014 components Large Assembly Cargo (1 ∼ 2 500) Hz
516.7 Shock (0.98 ∼ 491) m/s²
Procedure Ⅶ-Pendulum (0.98 ∼ 491) m/s²
Impact (4 ∼ 33) Hz
Procedure Ⅷ-Catapult Solar Radiation
Launch/Arrested (-20 ∼ 120) °C
Landing (800 ∼ 1 200) W/m²
519.7 Gunfire Shock Immersion
Procedure Ⅲ 1 000 mm
528.1 Mechanical Temperature, Vibration
Vibrations of Shipboard ( -40 ∼ 125) °C
Equipment (1 ∼ 2 000) Hz
(Type 1 - Environmental (0.98 ∼ 491) m/s²
Vibration)
(Sunshine)
512.6 Immersion
520.4 Temperature,
Altitude
431/433
No. KT393

500.6 Low Pressure
(Altitude)
(Exception)
procedureⅢ,Ⅳ
502.7 Low Temperature
503.7 Temperature
Shock
(Sunshine)
ProcedureⅡ Steady
506.6 Rain
ProcedureⅢ-Drip
507.6 Humidity
(Exception)
Table 507.6-III. Constant
temperature and
humidity - Induced cycle (0.8∼99.2)kPa
B1. (-70∼200)°C
509.7 Salt Fog (15∼95)%R.H.
512.6 Immersion 1200W/m²
ProcedureⅠImmersion 280 L/㎡/h over
Electrical
MIL-STD- materials and 513.8 Acceleration 1000mm SF-3 N
810H:2019 514.8 Vibration Nacl5%
components (Exception) Max276.6min-1
Category 5-Truck/Trailer Max587m/s²
/Tracked-Loose Cargo (1∼2000)Hz
Category 6-Truck/Trailer (0.98∼294)m/s²
/Tracked-Large (0.98∼736)m/s²
Assembly Cargo
516.8 Shock
(Exception)
Procedure Ⅶ-Pendulum
Impact
Procedure Ⅷ-Catapult
Launch
/Arrested Landing
519.8 Gunfire Shock
Procedure Ⅲ
520.5 Temperature,
Humidity, Vibration
and Altitude
528.1 Mechanical
Vibrations of
Shipboard Equipment
(Type 1 - Environmental
Vibration)
432/433
No. KT393

Environmental
Conditions and Test
Procedures for Airborne
Equipment
Section 4 Temperature (98.2 ∼ 9.12) kPa
and Altitude (-55 ∼ 85) °C
[Exception] (-55 ∼ 85) °C
4.6.3 Overpressure (50 ∼ 95) % R.H.
Test (Max 234.1) min-¹
Electrical Section 5 Temperature (Max 587) m/s²
RTCA DO-160G materials and Variation SF-3 N
(1 ∼ 2 000) Hz
components Section 6 Humidity (0.98 ∼ 491) m/s²
Section 7 Operational (15 ∼ 35) °C,
Shocks and Crash (5±1) %
Safety (50 ∼ 93) % R.H.
Section 8 Vibration 450 L/hr
Section 14 Salt Fog
Section 10
Waterproofness
10.3.3 spray proof test
Test Method for

Electronic Control
Components(VERSION :
6)
10. Mechanical (-70 ∼ 180) °C
Electrical Environmental Test (20 ∼ 98) % R.H.
SES E 001- materials and 11. Climatic (35 ∼ 40) °C, SF-3 N
04:2013 components Environmental Test NaCl 5%
11.9 Dust Test
11.10 Dust/Water
Protection Level Test
13. Durability Test
Technical Standard for

Safety, Reliability
Electrical
RRA Notice materials and and Communication Oscillation frequency (1 SF-3 N
No.2019-15 Protocol of Broadcast ∼ 50) Hz
components Communication
Equipment
Electrical Seismic Test Method for Oscillation frequency (1

RRA Notification materials and Telecommunication SF-3 N
No.2022-7 ∼ 50) Hz
components Facilities
End.
433/433

20230510 KT393 Dt&C Co., Ltd. PM Eng (최종)

Uploaded by

Copyright:

Available Formats

20230510 KT393 Dt&C Co., Ltd. PM Eng (최종)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

20230510 KT393 Dt&C Co., Ltd. PM Eng (최종)

Uploaded by

Copyright:

Available Formats

No.

03. Electrical Testing

Materials/ Standard Field

Fire hazard testing – Part Temperature: (0 ∼

Secondary cells and

Materials/ Standard Field

Secondary cells and

Secondary cells and

Materials/ Standard Field

03. Electrical Testing

Materials/ Standard Field

Safety requirements for

Safety requirement for

Safety requirement for

Materials/ Standard Field

Safety requirements for

Safety requirements for

Safety requirements for Supply voltage(AC) :

Safety requirements for Supply voltage(AC) :

Safety requirements for

Materials/ Standard Field

Safety requirements for

Safety requirements for

Safety requirements for

Safety requirements for

Safety requirements for

Materials/ Standard Field

Safety requirements for

Safety requirements for

03. Electrical Testing

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Household and similar

Materials/ Standard Field

Household and similar

Household and similar

Materials/ Standard Field

Household and similar

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field

Materials/ Standard Field