TEST REPORT

Report No. : BG:EE:1251002123 DATE : 13-Mar-2023

S T METAL INDUSTRIES
A-2/20,SITE-4, SAHIBABAD INDUSTRIAL AREA
GHAZIABAD, UP-201012

CONTACT PERSON : MR.SUKHWINDER SINGH

THE FOLLOWING SAMPLE(S) WAS/WERE SUBMITTED AND IDENTIFIED BY/ON BEHALF OF THE CUSTOMER
AS :
SGS JOB NO 2151800765
SAMPLE DESCRIPTION : LEAD FREE SOLDER(ROHS)
SAMPLE RECD ON : 09-Mar-2023
TESTING PERIOD : 09-Mar-2023 TO 13-Mar-2023
TEST(S) REQUESTED : ROHS 6E
TEST(S) METHOD : PLEASE REFER TO NEXT PAGE(S).
TEST(S) RESULTS : PLEASE REFER TO NEXT PAGE(S).
COUNTRY OF DESTINATION : INDIA
COUNTRY OF ORIGIN : INDIA

CONCLUSION: Based on the performed tests on submitted sample(s),the results of Cadmium, Lead, Mercury,
Hexavalent chromium, Polybrominated biphenyls (PBBs),Polybrominated diphenyl ethers
(PBDEs), Comply with the limits as set by RoHS Directive (EU) 2015/863 amending Annex II to
Directive 2011/65/EU.

Per Pro SGS India Private Ltd

Authorized Signatory
Kapil Patil
Manager -RSL-HL/EE

Email your Test Report Related Enquiries at: Feedback.HLT@sgs.com

JOE No. : 2151800765 Page 1 of 8 Control No.1251502013

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms
and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the
limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this
document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be
reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document
is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.

Consumer and Retail,Testing Laboratory,226,Udyog Vihar,Phase- I,Gurugram-122016,Haryana,India.t:(91-124) 6135000/6776300 www.sgs.com

SGS India Pvt. Ltd
Member of the SGS Group (SGS SA)
 TEST REPORT
Report No. : BG:EE:1251002123 DATE : 13-Mar-2023

Test Part Description:

Specimen no. SGS Sample ID Description

1 1 LEAD FREE SOLDER(ROHS)

Remarks:
(1) 1mg/kg=0.0001%
(2) MDL = Method Detection Limit
(3) ND = Not Detected (<MDL)
(4) - = not regulated

RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU

Test Method:

(1) With reference to IEC 62321-5:2013, determination of Cadmium by ICP-OES.

(2) With reference to IEC 62321-5:2013, determination of Lead by ICP-OES.
(3) With reference to IEC 62321-4:2013+A1:2017 determination of Mercury by ICP-OES.
(4) With reference to IEC 62321-7-1:2015, determination of Hexavalent Chromium by Colorimetric Method
using UV-Vis.
(5) With reference to IEC 62321-6:2015, determination of PBBs and PBDEs by GC-MS.

JOE No. : 2151800765 Page 2 of 8 Control No.1251502013

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms
and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the
limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this
document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be
reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document
is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.

Consumer and Retail,Testing Laboratory,226,Udyog Vihar,Phase- I,Gurugram-122016,Haryana,India.t:(91-124) 6135000/6776300 www.sgs.com

SGS India Pvt. Ltd
Member of the SGS Group (SGS SA)
 TEST REPORT
Report No. : BG:EE:1251002123 DATE : 13-Mar-2023

Test result:

Test Item(s): Unit Results MDL Limit

Sample -1
Cadmium(Cd) mg/kg ND 5 100
Lead (Pb) mg/kg 153 5 1000
Mercury (Hg) mg/kg ND 5 1000
Hexavalent Chromium (CrVI) ▼ μg/cm2 ND 0.10 -
Sum of PBBs mg/kg ND - 1000
Monobromobiphenyl mg/kg ND 50 -
Dibromobiphenyl mg/kg ND 50 -
Tribromobiphenyl mg/kg ND 50 -
Tetrabromobiphenyl mg/kg ND 50 -
Hexabromobiphenyl mg/kg ND 50 -
Pentabromobiphenyl mg/kg ND 50 -
Heptabromobiphenyl mg/kg ND 50 -
Octabromobiphenyl mg/kg ND 50 -
Nonabromobiphenyl mg/kg ND 50 -
Decabromobiphenyl mg/kg ND 50 -
Sum of PBDEs mg/kg ND - 1000
Monobromodiphenyl ether mg/kg ND 50 -
Dibromodiphenyl ether mg/kg ND 50 -
Tribromodiphenyl ether mg/kg ND 50 -
Tetrabromodiphenyl ether mg/kg ND 50 -
Pentabromodiphenyl ether mg/kg ND 50 -
Hexabromodiphenyl ether mg/kg ND 50 -
Heptabromodiphenyl ether mg/kg ND 50 -
Octabromodiphenyl ether mg/kg ND 50 -
Nonabromodiphenyl ether mg/kg ND 50 -
Decabromodiphenyl ether mg/kg ND 50 -

JOE No. : 2151800765 Page 3 of 8 Control No.1251502013

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms
and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the
limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this
document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be
reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document
is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.

Consumer and Retail,Testing Laboratory,226,Udyog Vihar,Phase- I,Gurugram-122016,Haryana,India.t:(91-124) 6135000/6776300 www.sgs.com

SGS India Pvt. Ltd
Member of the SGS Group (SGS SA)
 TEST REPORT
Report No. : BG:EE:1251002123 DATE : 13-Mar-2023

Notes:

(1) The maximum permissible limit is quoted from RoHS Directive (EU) 2015/863.

(2) IEC 62321 series is equivalent to EN 62321 series.

https://www.cenelec.eu/dyn/www/f?p=104:30:1742232870351101::::FSP_ORG_ID,FSP_LANG_ID:1258637,25

(3) ▼
= a. The sample is positive for Cr(VI) if the Cr(VI) concentration is greater than 0.13 μg/cm2. The sample coating
is considered to contain Cr(VI).
b. The sample is negative for Cr(VI) if Cr(VI) is ND (concentration less than 0.10 μg/cm2). The coating is
considered a non-Cr(VI) based coating.
c. The result between 0.10 μg/cm2 and 0.13 μg/cm2 is considered to be inconclusive - unavoidable coating
variations may influence the determination.

Information on storage conditions and production date of the tested sample is unavailable and thus Cr(VI) results
represent status of the sample at the time of testing.

As requested by client, the conclusion of Specimen X was drawn without considering the coating variation of the
sample.

JOE No. : 2151800765 Page 4 of 8 Control No.1251502013

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms
and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the
limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this
document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be
reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document
is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.

Consumer and Retail,Testing Laboratory,226,Udyog Vihar,Phase- I,Gurugram-122016,Haryana,India.t:(91-124) 6135000/6776300 www.sgs.com

SGS India Pvt. Ltd
Member of the SGS Group (SGS SA)
 TEST REPORT
Report No. : BG:EE:1251002123 DATE : 13-Mar-2023

Process Flow for analysis of metal contents in plastics, metals and electronic components sample

Sample preparation,
0.25 – 0.30 g
< 2×2×2 mm3

Microwave Digestion NO YES Microwave Digestion

System Si- based System
10 ml conc. HNO3 sample 10 ml HNO3 + 0.5 ml HF

Cool down
Cool down
Add 0.25 g
orthoboric acid

Filtration

25 ml final volume

ICP-OES/MS

Analyzed By : Md. Taqi Checked By : Bikram Deo Ohdar

JOE No. : 2151800765 Page 5 of 8 Control No.1251502013
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms
and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the
limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this
document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be
reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document
is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.

Consumer and Retail,Testing Laboratory,226,Udyog Vihar,Phase- I,Gurugram-122016,Haryana,India.t:(91-124) 6135000/6776300 www.sgs.com

SGS India Pvt. Ltd
Member of the SGS Group (SGS SA)
 TEST REPORT
Report No. : BG:EE:1251002123 DATE : 13-Mar-2023

Process Flow for analysis of Hexachromium contents in plastics, metals and electronic components sample

Sample

Non Metallic Metallic Sample

Sample
Positive

For solvent soluble For insoluble/unknown polymer Spot Test

polymers(ABS, PC & PVC) & electronics without Sb
Negative

Add NMP solvent for dissolution Added mixture of Toluene and Boiling water
followed by addition of digestion digestion solution extraction
soltuion

Dissolve polymer by Microwave digestion at 150°C Adding 1,5-diphenylcarbazide for

Ultrasonication at 60°C for 1hr for 1.5hr color development

Adjust the pH using Nitric acid. Add 1,5-

diphenylcarbazide for color development Red Color indicate presence of
Hexachromium. If necessary
confirm with UV-Vis
Analysis on UV-Vis Spectorphtometer
Spectorphtometer

Data

Analyzed By: Rishab Suri Checked By : Bikram Deo Ohdar

JOE No. : 2151800765 Page 6 of 8 Control No.1251502013
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms
and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the
limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this
document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be
reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document
is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.

Consumer and Retail,Testing Laboratory,226,Udyog Vihar,Phase- I,Gurugram-122016,Haryana,India.t:(91-124) 6135000/6776300 www.sgs.com

SGS India Pvt. Ltd
Member of the SGS Group (SGS SA)
 TEST REPORT
Report No. : BG:EE:1251002123 DATE : 13-Mar-2023

Process Flow for analysis of Flame Retardants in plastics, metals and electronic components sample

Sample

Sample Pretreatment

Soxhlet extraction
IEC 62321-6:2015

Concentrate/Dilute
Extracted solution

Filter if necessary

On High Mass Range GCMS-

Sample Analyzed

Analyzed By : Parvej Alam Siddiqui Checked By : Vijai Chauhan

JOE No. : 2151800765 Page 7 of 8 Control No.1251502013
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms
and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the
limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this
document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be
reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document
is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.

Consumer and Retail,Testing Laboratory,226,Udyog Vihar,Phase- I,Gurugram-122016,Haryana,India.t:(91-124) 6135000/6776300 www.sgs.com

SGS India Pvt. Ltd
Member of the SGS Group (SGS SA)
 TEST REPORT
Report No. : BG:EE:1251002123 DATE : 13-Mar-2023

Sample Photo: 1251002123

SGS authenticate the photo on original report only

*** End of Report ***

JOE No. : 2151800765 Page 8 of 8 Control No.1251502013

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms
and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the
limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the
Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this
document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be
reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document
is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.

Consumer and Retail,Testing Laboratory,226,Udyog Vihar,Phase- I,Gurugram-122016,Haryana,India.t:(91-124) 6135000/6776300 www.sgs.com

SGS India Pvt. Ltd
Member of the SGS Group (SGS SA)