www.fibran.

gr
FIBRANgeo BP-70-L
Stonewool insulation board with knit fibres
Technical Data Sheet / April 2022

0751

Description

FIBRANgeo ΒP-70-L rigid stonewool board is a natural inorganic fibrous product that is industrially produced from molten
rock spun into fibres, in accordance with European Standard EN 13162 (Thermal insulation products for buildings - Factory
made mineral wool (MW) products).
All four edges of the boards have L-cuts (shiplap) profiles. The cut is positioned in the middle of the edges and it is 15mm deep.

FIBRANgeo TDS SYMBOLS

Description
για τοποθέτηση σε λευκό φόντο για τοποθέτηση σε φόντο

Advantages
Boards designed for thermal insulation, fire resistance and
• Excellent themal insulation
sound insulation applications where increased mechanical
properties and resistance to compressive stress is required. • High mechanical properties
• L-cut profiles eliminate thermal
On flat roofs such as: bridges and ensure excellent joint
• External thermal and sound insulation of flat roofs, with implementation
stonewool that is covered by screed and water-insulation • Non-combustible material with
layer. excellent fire resistance
• External thermal and sound insulation of concrete or • Excellent sound absorption and sound
metal flat roofs,with stonewool that is covered by water- reduction
insulation membrane layer. • Open hive structure material with very
low water vapour diffusion resistance
that enchances the building element’s
breathability
• Excellent dimensional stability and
durability
• Water repellent and non-hygroscopic
• Easy to handle, cut and install
• Natural, inorganic, odourless, chemically
inert (practically neautral PH)
• Recyclable, friendly to the enviroment
and to the end user

01
www.fibran.gr
FIBRANgeo BP-70-L
Stonewool insulation board with knit fibres
Technical Data Sheet / April 2022

Technical characteristics
Designation Code:
MW (Mineral Wool) - EN 13162 – T7 – CS(10)70 – TR20 – PL(5)700 – WS – WL(P) – MU1 – SD33 – CP2 – AW0,95 – AFr50
Symbol
Technical Characteristics Unit Value EN Standard
EN 13162
EN 13162
Declared thermal conductivity at 10°C λD W/(mK) 0,039 EN 12667
EN 12939
Nominal thickness dN mm 100 – 220 EN 823
Α1
Fire classification - Class ΕΝ 13501-1
(Non-combustible)
Melting temperature - °C >1000 DIN 4102-17

Specific heat capacity c kJ/kgK 1,03 ISO 10456

T7
Thickness tolerance Τ Class EN 12431
(0 , +10%)
Compressive Stress at 10% thickness deformation CS(10) kPa ≥ 70 EN 826
Tensile strength perpendicular to faces TR kPa ≥ 20 EN 1607

Point Load at 5mm thickness deformation PL(5) N ≥ 700 EN 12430

EN 12431
Thickness Compressibility (Cp = dL - dB) CP mm 2 EN 13162

EN 13162
Recommended design load of board - kN/m2 18 EN 1991-1

Short term water absorption for 24 hours WS kg/m2 <1 EN 1609

Long term water absorption for 28 days WL(P) kg/m2 <3 EN 12087

Water vapor diffusion resistance factor, μ MU - 1 EN 12086

Dynamic Stiffness, s’, on boards’ thickness 50mm SD MN/m3 33 EN 29052-1

Air flow resistivity, r AFr kPa s/m2 ≥ 50 EN 29053

Weighted sound absorption coefficient on boards AW 0,95 Class A EN ISO 11654

- 0,90 EN ISO 354
with thickness 50mm, αw NRC

*dL = thickness under load of 0,25 kPa, dB = thickness under load of 2 kPa and preload +/- 48 kPa
Technical characteristics and DoP reffer to the product without facings.

Thermal resistance R
Nominal thickness dN mm 100 120 140 150 160 180 200 220 EN 823

Declared thermal RD m2K/W­ 2,55 3,05 3,55 3,80 4,10 4,60 5,10 5,60 EN 13162
resistance

02
www.fibran.gr
FIBRANgeo BP-70-L
Stonewool insulation board with knit fibres
Technical Data Sheet / April 2022

Acoustic properties
Sound absorption coefficient α (EN ISO 354) on boards with thickness 50mm
Frequency (Hz) αs αP αw

125 0,26 0,25 -

250 0,73 0,70 0,75
500 0,90 0,90 0,95
1000 1,00 1,00 0,95
2000 0,95 0,95 0,95
4000 0,94 0,95 0,85
Weighted sound absorption coefficient
αw = 0,95 - Class A (EN ISO 11654)
Noise reduction coefficient
NRC = 0,90 (ASTM 423)

Certification
FIBRANgeo ΒP-70-L stonewool insulation products have been certified according to European Norms ΕΝ 13162 και ΕΝ 13172
and hold the CE marking that derives from the Declaration of Performance DoP.
All FIBRANgeo stonewool insulation products meet the quality and safety requirements of the European Standards and
comply with the European Regulations 305/2011 (CPR).
Furthermore, all FIBRANgeo stonewool products, carry the certification mark EUCEB (European Certification Board for Mineral
Wool Products), whose procedures ensure compliance of mineral wool insulation products with the “Note Q” of Directive
97/69/EC, regarding their fibres biosolubility and their non-classification as dangerous materials.
Moreover, according to EC Regulation 790/2009 they are not classified as products that cause skin irritation (R38).
FIBRAN S.A. implements a system of quality management according to ISO 9001:2015 and environmental management
according to ISO 14001:2015.

Application Cover exposed skin.

When working in unventilated
disposable face mask.
Να καλύπτετε το εκτιθέμενο δέ
FIBRANgeo products must be protected from getting wet before and on their application. If part of the product Όταν εργάζεστε σε μη αεριζόμ
να φοράτε κατάλληλη μάσκα π
gets wet, it must be dried before installation. Stonewool dries quickly and its insulating properties remain
unchanged after drying. Packaging should be removed carefully just before the installation. Clean area using vacuum equi
Καθαρίζετε το χώρο χρησιμοπ
ηλεκτρική σκούπα.
Working areas should be kept clean. Unnecessary or extensive contact of the skin and eyes with product’s
off-cuts, fibres and dust should be avoided, and protective wear should be used (gloves, goggles, hats).
Waste should be disposed of
Products with facing AL, AX, YM ή YA are not suggested for application with service temperature on the surface according to local regulations.
Τα υπολείμματα πρέπει να διατ
σύμφωνα με τους τοπικούς κα
more than 90°C while those with surface XA are not suggested for more than 66°C.
Sufficient ventilation of the working areas should be ensured, whilst power cutting tools should always be Rinse in cold water before was

equipped or supplemented with a mechanical system of dust intake. Ξεπλύνετε με κρύο νερό καλά
πριν από την κυρίως πλύση.

Stonewool products are not dangerous materials for disposal. They are covered by code 17.06.04 of the waste
list, of Decision 2000/532 / EC and are disposed of in accordance with applicable environmental regulations. Ventilate working area if possib
Αερίζετε το χώρο εργασίας, εά
δυνατό.

More informations on the Safety Data Sheet of product.

Wear goggles when working o
Φοράτε προστατευτικά γυαλιά
προϊόν τοποθετείται ψηλά.

The mechanical effect of

contact with skin may cau
temporary itching.
03Η συνεχής επαφή ινών με
δέρμα είναι πιθανό να πρ
προσωρινή φαγούρα.
www.fibran.gr
FIBRANgeo BP-70-L
Stonewool insulation board with knit fibres
Technical Data Sheet / April 2022

Storage
FIBRANgeo products should be stored indoors. If stored outdoors, they must be protected from impregnation. Handling,
loading and unloading of the products should be carried out with care to avoid damage to both the packaging and the
board’s edges.

Packaging

Dimensions 2000 mm x 1200 mm (High Pallet / Short Pallet)

Thickness Width Length Pieces per pallet Quantity per pallet

[mm] [mm] [mm] [pc. , Ηigh / Short] [m2 , Ηigh / Short]

100 2000 1200 25 / 12 60,00 / 28,80

120 2000 1200 21 / 10 50,40 / 24,00
140 2000 1200 18 / 8 43,20 / 19,20
150 2000 1200 17 / 8 40,80 / 19,20
160 2000 1200 15 / 7 36,00 / 16,80
180 2000 1200 14 / 6 33,60 / 14,40
200 2000 1200 12 / 6 28,80 / 14,40
220 2000 1200 10 / 5 24,00 / 12,00

Dimensions 1000 mm x 1200 mm (High Pallet / Short Pallet)

Thickness Width Length Pieces per pallet Quantity per pallet

[mm] [mm] [mm] [pc. , Ηigh / Short] [m2 , Ηigh / Short]

100 1000 1200 50 / 12 60,00 / 14,40

120 1000 1200 42 / 10 50,40 / 12,00
140 1000 1200 36 / 8 43,20 / 9,60
150 1000 1200 34 / 8 40,80 / 9,60
160 1000 1200 30 / 7 36,00 / 8,40
180 1000 1200 28 / 6 33,60 / 7,20
200 1000 1200 24 / 6 28,80 / 7,20
220 1000 1200 20 / 5 24,00 / 6,00

FIBRAN S.A
6th km Thessaloniki - Oreokastro Rd.
P.O. Box 40306, A.C. 564 10
Thessaloniki, Greece
Tel. +30 2310 682 425. 692 700 info@fibran.gr
Fax. +30 2310 683 131 www.fibran.gr

FIBRAN reserves the right to alter or amend product specifications without notice. The information included in this publication is correct to the best of our knowledge at the
time of printing. Whilst FIBRAN will endeavour to ensure publications are up to date, it is the user’s responsibility to check with the company the validity of the information
prior to the material’s use.

04