Common Model Town Board Questions
Common Model Town Board Questions
Common Model Town Board Questions
Rule when entering roundabout – Incoming traffic from the right hand side has priority of way
Two-way traffic highway and hazard demarcations are not featured in the MTB.
Roundabout defined as – meeting point for traffic, where more than 2 roads converge. Function –
facilitate movement of vehicles in different directions without obstruction or collision.
Give way sign on MTB is represented by – broken white lines across the road
Stop sign on MTB is represented by – Continuous white line across the road
Channelizing island cannot be used, even in times of emergency – this statement is true
Pedestrian crossing – is a section of the road demarcated (marked) in white and black that is used by
pedestrians to safely cross the road
Rules of angle parking – We park from furthest end, we park using forward gear, and exit using
reverse gear, we only park saloon cars.
Line – is a marking that shows the boundaries of the path to be followed by a vehicle
Double solid yellow line in the MIDDLE of a Single carriage road means – keep to your side and do not
overtake
After exit from the roundabout, the rule to be applied is – always keep left
Minor road options – 214, that is; LANE 1: 2 ways, LANE 2: 1 way & LANE 3: 4 ways. Major road - 2124
We count lanes on a one-way traffic road from – left to right AKA, outermost to innermost
We should not overtake when – at the junction, at a no overtaking sign and at roundabouts