Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    8261 A - STS english-STATIC TRANSFER SWITCH

    Uploaded by

    pablo carrizo
    Static Transfer Switches (STS) transfer load between two independent AC power sources with a fast transfer time of 1/4 of a cycle to ensure uninterrupted operation of sensitive equipment. STS are used in power systems, computer centers, buildings, and other applications sensitive to power interruptions. The STS consists of bidirectional thyristor switches and control system that can automatically or manually transfer the load between sources depending on voltage and synchronization.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    8261 A - STS english-STATIC TRANSFER SWITCH

    Uploaded by

    pablo carrizo
    23 views2 pages
    Static Transfer Switches (STS) transfer load between two independent AC power sources with a fast transfer time of 1/4 of a cycle to ensure uninterrupted operation of sensitive equipment. STS are used in power systems, computer centers, buildings, and other applications sensitive to power interruptions. The STS consists of bidirectional thyristor switches and control system that can automatically or manually transfer the load between sources depending on voltage and synchronization.

    Original Description:

    llave de transferencia estatica

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Static Transfer Switches (STS) transfer load between two independent AC power sources with a fast transfer time of 1/4 of a cycle to ensure uninterrupted operation of sensitive equipment. STS are used in power systems, computer centers, buildings, and other applications sensitive to power interruptions. The STS consists of bidirectional thyristor switches and control system that can automatically or manually transfer the load between sources depending on voltage and synchronization.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views2 pages

    8261 A - STS english-STATIC TRANSFER SWITCH

    Uploaded by

    pablo carrizo
    Static Transfer Switches (STS) transfer load between two independent AC power sources with a fast transfer time of 1/4 of a cycle to ensure uninterrupted operation of sensitive equipment. STS are used in power systems, computer centers, buildings, and other applications sensitive to power interruptions. The STS consists of bidirectional thyristor switches and control system that can automatically or manually transfer the load between sources depending on voltage and synchronization.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    STS Digital Energy TM

    STS
    Static Transfer Switches

    Static Transfer Switches (STS) are designed to transfer


    the supply between 2 independent AC power sources.
    Unlike traditional automatic transfer switches (ATS), a
    static transfer switch provides a fast load transfer (typi-
    cally 1/4 of a cycle), which ensures uninterrupted opera-
    tion of sensitive electronic equipment. Load retransfer to
    the preferred input source is virtually instantaneous
    (typically 0.1 ms). The basic applications of STS are in
    automatic systems in the power industry, power supply
    systems for petrochemical industry, computer and tele-
    communication centers, automatic and security systems
    of 'intelligent' buildings as well as other equipment which
    is sensitive to interruptions in the supply. The excellent
    overload capability and transfer algorithm enables fast
    fuse clearance in the event of a short-circuit. In conse-
    quence the voltage immediately returns to normal to
    supply the other loads. The built-in transient voltage surge
    suppression system for SCR switches provides additional
    protection against damage to the supplied equipment.

    The static transfer switch consists of two (for each phase)


    bidirectional thyristor switches equipped with a control and
    protection system. The 4 pole types have an additional
    neutral line switch. After failure of the preferred source,
    the STS checks the state of the alternate power source
    and transfers the load to the source that provides power
    within selectable limits. This transfer can be triggered by:
    disturbance in the preferred source voltage, overcurrent in
    the source, manual or remote change of the preferred source.

    With both sources in limits and synchronized (phase error within the acceptable range), manual or
    remote transfer is performed in less than 200 µs. Transfers initiated by fault conditions in the pre-
    ferred source depend on the status of the alternate source. For synchronized power sources with
    phase error within the limits, switching to an alternate source is obtained within 6 ms delay. Lack of
    synchronization causes delay before transfer. It is possible to set the delay with dipswitches.

    Through their complete life cycle, all GE Power Quality systems are fully supported by service teams
    which provide world-class, 24x7 preventive and corrective services, training and application expertise.

    FEATURES & BENEFITS

    ● Selectable voltage limits for full flexibility to protect ● Blocked transfer in case of short circuit preventing
    equipment against sags, swells and interruptions to jeopardize other user.
    ● Three redundant power supplies providing maximum ● Manual bypass for no-break operation of the load
    reliability during maintenance
    ● Fail-Safe CMOS logic for fast and reliable control ● Dry contacts to provide status and alarm
    of the STS information to other control systems
    ● Easy to install and to operate ● Rackmounted models for easy integration into
    ● Redundant cooling providing full functionality, other systems
    even in case of a fan failure ● Userfriendly control panel for easy operation
    ● Surge protection to prevent damage to the STS ● Neutral dimensioned for 200% of nominal current
    and the supplied equipment to handle imbalanced loads

    UPS Product Technology - www.gedigitalenergy.com ENGLISH


    TECHNICAL SPECIFICATIONS
    Nominal Current Rating 25A 40A 63A 100A 150A 250A 400A 630A
    Enclosures
    3 pole, floorstanding cabinet * A B C F
    3 pole, 19 inch rackmounted * E -
    4 pole, floorstanding cabinet * A B C F D
    4 pole, 19 inch rackmount * E -
    Weight (kg), preliminary 60 68 72 195 195 195 280 280
    Color RAL 7032
    Input characteristics
    Nominal input voltage 3 x 400V ph-ph
    Input voltage window -25% / +20%
    Nominal frequency 50Hz
    Frequency window -9% / +6%
    Output characteristics
    Efficiency >99% at cos phi 0.8
    Crestfactor acceptance 3.5
    Powerfactor (max. Cos phi) 0.5 - 1.0 (leading/lagging)
    Overload behavior 125/400/800/1000/1500% 1 hour, 5sec, 400ms, 200ms, 20ms
    Short circuit current withstand (max 20ms) 3200A 8000A 15000A 25500A 39000A
    Transfer time (manual triggering) < 0.1 ms
    Transfer time (automatic transfer) < 6 ms, typical: 3 ms
    Settings
    Overvoltage level setting + 6/9/13/16/20%, selectable by dipswitch
    Undervoltage level setting - 8/12/16/24%, selectable by dipswitch
    Phase delay limit (for synchronized lines) 8/12/16/20/24 degrees, selectable by dipswitch
    Transfer blocked after output current exceeding limit no blocking, 3/4.5/6/7.5/9 x nominal current, selectable by dipswitch
    Transfer time (lines not synchronized) 13/17/25/50 ms , selectable by dipswitch
    Delay for retransfer to preferred source 0.8/1/8/25 sec, selectable by dipswitch
    Ambient conditions
    Operating temperature 0-40 degr. Celcius
    Humidity <95%, non condensing
    Altitude 1000 m (above 1000m 5% derating per 500m ; max: 3000m)
    Cooling redundant cooling fans
    Audible noise < 55 dBA
    EMC EN50022 level B, EN60555-23
    Protection IP20 (floorstanding), IP00 (for rackmounted models)
    Alarm / Status Contacts
    Dry contacts 300Vdc or 250Vac / 0.3A dc or 4A ac @220V
    Status information manual transfer on, retransfer off, primary/secondary source OK, primary/secondary source on
    Disturbance alarms primary/secondary source not healthy, sources not synchronized, manual control on
    Failure alarms overload, overtemperature, fuse failure, internal STS failure

    * Dimensions of cabinets h x w x d (mm) A:1100x800x400 B:1900x800x500 C:1900x1200x500 D:2300x1200x600 E:710x483x465 F:2100x1200x600

    GE Consumer & Industrial


    Via Cantonale 50
    6595 Riazzino (Locarno)
    Switzerland
    + 41 (0) 91 850 51 51

    1 Oak Hill Center, Suite 301


    Westmont, IL 60559, USA
    + 1 773 299-6600
    866. GEDE:UPS
    (866 433 3877)

    www.gedigitalenergy.com
    GEA D1018 CE © General Electric Company, USA All Rights Reserved (01/04) Reproduction only upon written consent by GE

    You might also like